Brandt Optimat Ktd 720 pirkti naudotą (93)

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 007517, Type of edge applied: thin edge, thick edge, solid wood Nedpfowuz E Rjx Af Njwb Adhesive system: EVA, hot air Jointing milling unit: yes Multifunction unit: yes Top milling unit: yes Max. feed rate: 18 m/min Maximum panel thickness: 60 mm Working units: 9 pcs

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, I am selling a fully equipped edge banding machine, BRANDT Optimat KDF 220 C, year of manufacture 2014: Configuration: - Infeed fence manually adjustable - Jointing unit manually adjustable Nsdpfxou N T Ewe Af Njwb - Edge banding with EVA glue / PUR glue possible - Pressure zone for materials manually adjustable - End trimming saws pneumatically adjustable - Top and bottom radius trimming manually adjustable - Corner rounding unit, 1-motor, manually adjustable - Radius scraper R2 pneumatically disengageable (with set of R1 included) - Control panel Working height adjustable via servomotor Material height: 8-50 mm Edge material thickness: 0.4-3 mm Feed speed: 10 m/min Total length incl. feed table: 4150 mm Total weight: 1320 kg Very good condition, fully functional! Including complete documentation and CE certification. Available immediately.

Sąlyga: naudotas, Gamybos metai: 2006, Used machine Year of manufacture: 2006 Features and technical specifications: - Equipped with gluing unit for hot-melt adhesive granules - Processing of PU adhesive granules possible, subject to adhesive processing regulations - Glue reservoir located below the glue roller - Application of glue to the workpiece via glue roller in both co- and counter-rotation - With contact heating shoe for preheating the workpiece - Automatic edge magazine for roll material and fixed lengths - Pressure zone with pneumatically driven main pressure roller and special secondary pressure rollers for consolidation of the upper and lower glue joints - Centrally adjustable upper pressure - Central manual lubricating system for the chain conveyor - Control panel at the machine infeed - End trimming saw unit: - For front and rear edge overhangs; high-precision linear guide - 2 motors each 0.18 kW - Swivel range for straight and chamfer trimming: 0-15 degrees - Flush trimming unit: - Top and bottom with vertical and horizontal tracing - Swivel range 0-15 degrees with 2 milling motors with changeable insert combination for straight/radius cuts - Digital counters enable quick and defined, i.e. repeatable settings - Two-point pneumatic adjustment of upper and lower milling motors - Scraper unit for finish processing with horizontal/vertical tracing - Extendable workpiece support up to 350 mm - Integrated track control for contactless control of processing functions. Adjustable via keyboard and LED display - Workpiece thickness: 8 - 50 mm - Edge thickness: 0.4 - 3 mm - Feed speed: approx. 9 m/min - Connected load: 4.1 kW - Compressed air connection: 6 bar Nwedpswkbd Esfx Af Neb Machine length: 3,150 mm Weight: approx. 750 kg Availability: short-term Location: Röllbach

Sąlyga: geras (naudotas), Gamybos metai: 2006, • Glue pot Nwsdpfx Aeibdyqjf Nob • Conversion: carried out by Hüttenhölscher company in Verl • Area of application: adhesive application system for handle rails • Vacuum table: included • Automatic pressure zone: included

Sąlyga: geras (naudotas), Gamybos metai: 2008, mašinos/transporto priemonės numeris: 0-260-20-1170, Kantfräs & kap Brandt Typ: Optimat FTK 130 Nr: 0-260-20-1170 År: 2008 FTK 130 är utvecklad som ett komplement till kantlistningsmaskiner. Huvudområdet för FTK 130 är formade arbetsstycken där både inre och yttre radier kan bearbetas. Även raka arbetsstycken kan enkelt bearbetas. Trimningsteknik för formade arbetsstycken: För mindre snickerier erbjuder FTK 130 en flexibel och kostnadseffektiv lösning för deras trimningsbehov. För att bearbeta både inre och yttre former är trimningsmotorerna vertikalt monterade. Fräs- och kapenheter för samtidig övre och undre radie-/renfräsning av överblivet kantlistmaterial på arbetsstycken med raka kanter eller formade detaljer med inre och yttre radier. Kapskärningsenhet för exakt avkapning av överblivet listmaterial i fram- och bakkant i arbetsriktningen. Teknisk information: Fräsenhet: Arbetsstyckets tjocklek: ca 12–55 mm Arbetsstyckets minsta bredd: ca 30 mm Minsta inre radie: ca 35 mm Max kantlisttjocklek: ca 3 mm Fräsverktyg: 2xWPL radiefräs r=3, diameter 67x21x16 mm Fräsmotorer: 11 000 v/min Nsdpfx Aoq Ehpaef Njwb Kapenhet: Arbetsstyckets tjocklek: 12–55 mm Max kantlisttjocklek: 3 mm Klingdiameter: 100 mm Kapsnitt: 3 mm Centrumhål: 36 mm Tryckluft: 6 bar, anslutning 1/2", ca 2000 PA Luftförbrukning per slag: ca 10 NL Utsugningsanslutning: diameter 80 mm, 510 m³/h, lufthastighet 28 m/s El: 400 V, 2,5 kW, 50 Hz, 3-fas, 16 A Mått: 1130 x 765 x 1480 mm (lxbxh) Vikt: 320 kg Lager nr: 2001877BXA

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, I am selling a fully equipped edge banding machine, BRANDT Optimat KDF 440 C, year of manufacture 2015: Nwjdpfx Aewun Irjf Njb Configuration: - Infeed fence adjustable via servo motor - Jointing unit adjustable manually - Edge application with EVA glue / Airtec System Schugoma - Material pressure zone adjustable manually - End trimming saws adjustable pneumatically - Top and bottom radius milling units adjustable via servo motor - Corner rounding unit with 2 motors, adjustable manually - Radius scraper R2 pneumatically switchable - Flat scraper pneumatically switchable - Polishing brushes - Separator and cleaning spray units at infeed and outfeed - Control panel Working height adjustable via servo motor Material height: 8–60 mm Edge material thickness: 0.4–8 mm Feed speed: 11 m/min Total length including feed table: 5,573 mm Total weight: 1,860 kg Only 592,198 meters glued. Very good condition, fully functional! Includes complete documentation and CE certification. Available immediately.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, Šlifavimo (priešfrezavimo) įrenginys plokštėms. Dvigubo variklio galinis frezavimas. Briaunų frezavimo įrenginys. Briaunų grandiklis (spindulio/plokščias). Šepečiai. Valdymas: Liečiamas ekranas. Njdpfx Afox I Izle Njwb

Sąlyga: naudotas, Gamybos metai: 2000, mašinos/transporto priemonės numeris: 0-260-06-0228, Foot control 1200 x 800 mm Extraction nozzle 80 mm y Pneumatic connection Nwedpfjigadlsx Af Neb Cable + plug 16 A 1 set of operating tools 1 set of tracing wheels

Sąlyga: geras (naudotas), Code: 0134 Marca: BRANDT - ALEMANIA Modelo: KTD 53 Chapeadora de cantos automática para madera, PVC, chapa, muebles, mobiliario a medida, carpintería y diversos usos Datos técnicos: Altura mínima/máxima del panel: 10/40 mm Grosor del canto mín/máx: 0,4 - 1,5 mm Velocidad de avance: 7 m/min con transportador motorizado de rodillos Ancho mínimo del panel: 65 mm Composición: Unidad de encolado Unidad de cizalla de corte Unidad de corte de extremos Unidad de recorte superior/inferior Ruedas en la base para fácil manipulación Voltaje: 380/50 Potencia total: 4,5 kW Aire comprimido: 6 bar Dimensiones totales: 1800 x 615 x 1170 mm (alto) Nwedswq Sc Sopfx Af Nob Peso: 280 kg

Sąlyga: naudotas, Type: OPTIMAT F 13 Year of manufacture: 2001 Condition: function tested, very good, used - Workpiece thickness 16 to 55 mm - Minimum workpiece width 30 mm - Minimum inner radius 35 mm - Maximum edge thickness 3 mm - 2 milling motors 0.4 kW each - Extraction port 80 mm Nodpfx Aeud U Iysf Nswb

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 0-261-07-2126, briaunos storis (maks.): 8 mm, darbinio aukščio: 950 mm, ruošinio plotis (maks.): 60 mm, ruošinio ilgis (maks.): 4 760 mm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Machine type: KDN 530 C Machine length: 4,760 mm Connected load: 6 kW Weight: 1,900 kg Extraction port diameter: 2 x 100 mm Working area Feed speed: 11 m/min (optionally: 14 m/min) Workpiece thickness: 8 – 60 mm Edge thickness: 0.4 – 8 mm Roll separation: max. 3.0 x 45 / 0.8 x 65 mm Nodpfx Aju Tur Rjf Nowb Working height: 950 mm MACHINE DETAILS Machine dimensions (W x H): 1,560 x 2,300 mm Voltage: 400 V, 3 Ph, 50 Hz Pneumatic operating pressure: 6 bar Noise emission level: 80–87 dB(A)

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: C-261-04-2523, X ašies padavimo greitis: 9 000 m/min, pjūklo disko skersmuo: 100 mm, sukimosi greitis (maks.): 12 000 aps./min, The submission of a bid obligates the buyer to collect the item within the specified period, no later than 14.10.2025! TECHNICAL DETAILS Edge Processing Edge Type: Straight edges Edge Material: Cut strips, lip-cut strips, roll material Feed Speed: 9 m/min Edge Material Thickness: 0.4–3.0 mm Lip Thickness: 0.4–3.0 mm Edge Material Height: 55 mm Roll Diameter: 800 mm Spindle Speed: 12,000 rpm Max. Tool Dimensions: 100 × 62 × 30 mm Extraction Port Ø: 120 mm Workpiece Data Workpiece Thickness: 8–50 mm Positioning Accuracy: 0.1 mm Edge Banding Edge Type: Straight edges Edge Material: Roll material Max. Tape Cut: 3 × 30 mm or 0.8 × 45 mm Operating Pressure: 6 bar Edge Gluing Unit Spindle Speed: up to 1,800 rpm End-Trimming Unit Motor Speed: 12,000 rpm Saw Blade Diameter: 100 mm Cutting Width: 2.6 mm Bore Diameter: 32 mm Nodpfx Ajxhgk Asf Njwb Workpiece Thickness: 45 mm Max. Edge Material Height: 3 mm Edge Material Angle: 0–15° Edge Material Cross-Section: 135 mm² Flush Milling Unit Spindle Speed: 12,000 rpm Max. Workpiece Thickness: 8–50 mm Max. Edge Thickness: 3 mm Straight Tools: 2 × WPL milling cutter Ø 50 × 12 × 16 mm, z = 4 Combination Tools r = 3 mm: 2 × trimmer Ø 56 × 50 × 12 × 16 mm, z = 4 MACHINE DETAILS Electrical Data Voltage: 400 V Frequency: 50 Hz Fuse Rating: 16 A Control Voltage: 24 V

Sąlyga: naudotas, Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, Parduodama kraštų klijavimo staklė BRANDT KDF 660! Pagaminimo metai: 2007. Maksimalus briaunos storis: 12 mm. Maksimalus plokštės storis: 60 mm. Maksimalus ritinio briaunos storis: 3 mm. Maksimalus padavimo greitis: 16 m/min. Nwjdox Ey D Hepfx Af Njb

Sąlyga: naudotas, Gamybos metai: 2016, veikimo valandos: 2 500 h, Vienpusė briaunų klijavimo staklė skirta tiesių ruošinių briaunų apdirbimui bei įvairių briaunų medžiagų klijavimui ir galutiniam apdirbimui išilginiu ir skersiniu praleidimu. AGREGATŲ APŽVALGA: Prailginama įvorių liniuotė 300 mm su papildoma laminato pertekliaus įranga Pjovimo-frezavimo agregatas 2 x 2,2 kW 200 Hz Klijavimo agregatas A12 su automatiniu briaunų padavimu – Tepimo vienetas QA 65 N EVA Atpjovimo agregatas kampu/tiesiai 2 x 0,35 kW Pneumatinis kampinio/tiesinio atpjovimo reguliavimas Pneumatinis dvitaškis atpjovimo reguliavimas Daugiapakopis frezavimo agregatas MS40 2 x 0,55 kW priešinga eiga su ašies reguliavimu – su pneumatine dvitaške reguliavimo sistema nustatymo voleliams (lygiagretus ir radiusinis/kampinis frezavimas) Multifunkcinis formavimo-frezavimo agregatas 2 x 0,4 kW Daugiapakopis traukimo peilio agregatas MZ 40 Pneumatinis traukimo peilio reguliavimas Nedpfex S Nc Eox Af Nowb Klijų siūlės traukimo peilis Poliravimo agregatas Skiriamosios priemonės purškimo agregatas ruošiniui Slydimo priemonės purškimo agregatas Valymo priemonės purškimo agregatas ruošiniui Valdymo sistema POWERTOUCH

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Single-sided edge banding machine for processing straight workpiece edges as well as applying and post-processing various edge materials in both longitudinal and transverse feed. OVERVIEW OF UNIT CONFIGURATION: Electronic control POWER CONTROL PC 20+ PU top pressure rollers instead of rubber rollers Nwsdpfox S I Iyjx Af Njb Optimization of workpiece spacing Infeed fence extension by 300mm with auxiliary device for laminate overhang JOINTING CUTTER UNIT 2 x 2.2 kW 200 Hz GLUING UNIT A12 with automatic edge feed – Quickmelt application unit – Standard application unit, interchangeable, for PU adhesive – Pressure zone with motorized adjustment END TRIMMING UNIT BEVEL/STRAIGHT 2 x 0.35 kW PNEUMATIC ADJUSTMENT FOR BEVEL/STRAIGHT END TRIMMING PNEUMATIC 2-POINT ADJUSTMENT FOR END TRIMMING PRE-MILLING UNIT 2 x 0.55 kW counter-rotating – With PNEUMATIC 2-POINT ADJUSTMENT (flush and radius/bevel milling) – Program-controlled side tracing rollers infinitely adjustable and for edge thickness – Multiple roller tracing MULTIFUNCTIONAL PROFILE SHAPING UNIT 2 x 0.4 kW with changeover device and quick-change heads PROFILE SCRAPING KNIFE WITH QUICK-CHANGE HEADS Special tracing for profile scraper PNEUMATIC SCRAPER ADJUSTMENT GLUE JOINT SCRAPER BUFFING UNIT RELEASE AGENT SPRAY UNIT FOR WORKPIECE CLEANING AGENT SPRAY UNIT FOR WORKPIECE

Sąlyga: naudotas, BRANDT highflex 1440 edgebander well-equipped, PRE-MILLING UNITS glue application pneumatic pre-cut guillotine pressure rollers finishing saw units top and bottom trimming unit 2 x corner rounding units profile scraper flat scraper polisher the machine is equipped with NC controlled cutters and a pneumatic package max workpiece height: 60 mm max edge material thickness in rolls: 3 mm Nsdpfev H D S Ssx Af Nswb max feed speed: 14 m/min machine is operational, possibility to inspect before purchase

Sąlyga: naudotas, used machine Nwjdpfxowwxyko Af Njb

Sąlyga: labai geros būklės (naudotas), klijavimo aparatas guolotina skersinio pjovimo staklės Nwjdpfxsttu Ris Af Nob frezavimo staklės grandiklis poliravimo mašina

Sąlyga: naudotas, Gamybos metai: 2002, Mašinos ilgis: 6240 mm Svoris: 2400 kg Prisijungimo galia: 14 kW Ištraukimo skersmuo: 120 / 140 mm Sandėliavimo vieta: Nattheimas Nedpevvkfwsfx Af Nswb

Sąlyga: naudotas, Aggregate construction kit, format processing unit, cutting unit, milling unit, profiling milling unit, jointing milling unit, cross-cutting unit, double-end profiler, edge processing machine, scoring motor, cutting motor, milling motor for edge processing machine -Manufacturer: Homag, milling unit from edge banding machine BRANDT KM 36 / KM 35 -Motor: 2x Homag type LF-55L 0.55 kW / 12,000 rpm -Voltage: 220V / 200 Hz Nodsgy Dbhjpfx Af Nowb -Quantity: 2 milling units available -Price: per unit -Dimensions: 500/350/H570 mm -Weight: 55 kg

Sąlyga: naudotas, Aggregate module, format processing unit, machining unit, milling unit, contour milling unit, joint milling unit, cross-cutting unit, double end profiler, edge processing machine, scoring motor, machining motor, milling motor for edge processing machine - Manufacturer: Homag, cross-cutting unit from edge banding machine BRANDT KM 35 - Motor: Homag Type LF-40-L - Power: 0.27 kW / 12,000 rpm - Voltage: 220V / 200 Hz - Saw blade: Ø 90 mm Njdpfx Ajgy T I Tsf Nswb - Pneumatic components: Bosch - Individual components: see photos - Total dimensions: 500/370/H680 mm - Weight: 26 kg

Sąlyga: naudotas, Aggregate modular system, format processing unit, machining unit, milling unit, contour milling unit, joint trimming unit, cross-cutting unit, double-end profiler, edge processing machine, scoring motor, machining motor, milling motor for edge processing machine, profile holder for edge banding machine Nwodpogy T Nbofx Af Neb - Manufacturer: Homag, profile holder from edge banding machine BRANDT KM 35 - Individual components: see photos - Overall dimensions: 665/540/H375 mm - Weight: 30 kg

Sąlyga: naudotas, finishing unit, buffing unit, modular aggregate system, profiling aggregate, double-end profiler, edge processing machine, following the scraper for edge processing machine Nwsdpfx Afjgx Am Ie Neb -Finishing unit: from edge banding machine BRANDT KM 36 -Motor: 0.18 kW -side adjustment: yes -height adjustment: yes -Quantity: 2 units available -Speed: 1x 1360 rpm, 1x 1250 rpm -Price: per piece -Dimensions: 260/370/H510 mm / 260/370/H480 mm -Weight: 22 kg/unit

Sąlyga: naudotas, Aggregate kit, format processing unit, machining unit, milling unit, contour milling unit, joinery milling unit, cross-cutting unit, double-end profiler, edge processing machine, scoring motor, machining motor, milling motor for edge processing machine -Sale: Delivery in current condition as inspected -Protective cover: Damage as shown in photos -Manufacturer: Homag, milling unit from edge banding machine BRANDT KS 25 -Motor: Homag 0.75 kW / 12,000 rpm -Voltage: 220V / 200 Hz -Pneumatic cylinder: Bosch -Dimensions: 900/570/H325 mm Nwjdpfxogylrlj Af Nsb -Weight: 44 kg

Sąlyga: naudotas, Modular aggregate system, profile processing aggregate, machining aggregate, milling aggregate, contour milling aggregate, jointing milling aggregate, cross-cutting aggregate, double-end profiler, edge processing machine, scorer motor, machining motor, milling motor for edge processing machine - Manufacturer: Homag, cross-cutting aggregate from edge banding machine BRANDT KM 35 - Motor: Homag Type LF-40-L - Power: 0.27 kW / 12,000 rpm - Voltage: 220V / 200 Hz - Saw blade: Ø 90 mm - Individual components: see photos - Overall dimensions: 590/280/H750 mm Nwsdpfsgy T Nmjx Af Nsb - Weight: 27 kg