Brandt Optimat Kd 56 pirkti naudotą (91)

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2001, BRANDT OPTIMAT KD 68 CF Edge Bander – Year of manufacture: 2001 – Operating and Maintenance Manual (DTR) TECHNICAL PARAMETERS: - Machine adapted for PVC/ABS edge processing - Edge banding up to 3 mm thickness and wood strips up to 9 mm thickness - Pre-milling unit – panel milling Iodpfxjhcitro Afwea - Tape pressure unit - Glue pot for hot-melt adhesive granulate, with additional glue application roller - Heated tape guide rail - Guillotine for pre-trimming edge banding - 3 pressure rollers - 2 end trimming units with saw blades - 2 profile milling units for edge shaping (radius cutter heads) - Corner rounding unit (milling) - Scraper units – for removing excess glue - Polishing units - Max. workpiece thickness: 50 mm - Min. workpiece width: 60 mm - Min. workpiece length: 160 mm - Feed speed: 96 m/min - Total power: 10.8 kW - Extraction port diameter: 120 mm - Dimensions (L/W/H): 5700 / 1200 / 2100 mm - Weight: 2000 kg

Sąlyga: naudotas, Gamybos metai: 1996, Krašto storis: 0,4 - 12 mm Ritininio krašto storis: 3 x 45 mm arba 0,8 - 60 mm Minimalus ruošinio plotis: 65 mm Minimalus ruošinio ilgis: 160 mm Ruošinio storis: 10 - 55 mm Pasiūla: 13 m/min Išankstinis frezavimas (sujungimas) Klijų rezervuaras Quickmelt Klijavimo mazgas Nupjovimas Briaunos frezavimas Fasavimo frezavimas Spindulinis frezavimas Kampų kopijavimas Plokščia traukimo ašmenys Šlifavimo agregatas Staklių matmenys: 7450 x 1220 x 2400 mm Svoris: 3000 kg Sandėliavimo vieta: Nattheim Iedjvvkd Tepfx Afwoa

Sąlyga: naudotas, Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, Tipas: Vienpusė briaunų klijavimo staklės Gamintojas: BRANDT Modelis: Optimat KDF 550 C Metai: 2008 Vieta: Lietuva Sąlygos: kaip yra, ten kur yra Plokštės storis: 60 mm Briaunos storis: 8 mm Padavimo greitis: 11 m/min Matmenys (ilgis × plotis × aukštis): 5860,0 × 1560,0 × 230,0 mm Iedpfx Afjxwwb Rowja Svoris: 2600 kg Padavimo greitis: 11 m/min Rušinės storis: 8–60 mm / briaunos storis: 0,4–8 mm / darbinis aukštis: 950 mm Elektros tiekimas: 400 V – 3 fazės – 50 Hz / pneumat. slėgis: 6 bar / triukšmo lygis: 80…87 dB(A) Ištraukimo diametras: 1 × 120 mm / 2 × 100 mm / ritinėlių tarpai: maks. 3,0 × 45 mm / 0,8 × 65 mm

Sąlyga: naudotas, Gamybos metai: 2004, Used machine Year of manufacture: 2004 with gluing unit for hot-melt adhesive granulate Adhesive reservoir located below the glue roller Glue application to the workpiece via glue roller in both co-rotating and counter-rotating directions automatic edge magazine for coil material and fixed lengths Pressure zone with pneumatically driven main pressure roller as well as specialized post-pressure rollers for compressing the upper and lower glue joint Central, adjustable top pressure Central manual chain track lubrication Control panel at the machine infeed End trimming saw aggregate for front and rear edge overhang; high-precision linear guide 2 motors, each 0.18 kW Swivel range for straight and bevel trimming: 0-15 degrees Flush trimming unit, top and bottom, with vertical and horizontal sensing Swivel range 0-15 degrees with 2 milling motors and reversible cutter combination (straight/radius) Digital display units enable quick, precise, and thus repeatable adjustments Two-point pneumatic adjustment for upper and lower milling motors Scraper unit for fine finishing with horizontal/vertical sensing Workpiece support extendable to 350 mm Integrated track control for contactless operation of processing functions. Adjustment via keyboard and LED display Workpiece thickness: 8 - 50 mm Edge thickness: 0.4 - 3 mm Feed speed: approx. 9 m/min. Electrical connection: 4.1 kW Compressed air connection: 6 bar Weight: approx. 750 kg Machine length: 3150 mm Iodpfoxya Rtsx Afwja Availability: short-term Storage location: Flörsheim

Sąlyga: geras (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, Kantų užlydymo staklės Kuper Optimat KDF 660 – naudota, paruošta demonstracijai Naudotos Kuper Optimat KDF 660 kantų užlydymo staklės yra geros būklės ir šiuo metu prijungtos prie elektros, todėl galima apžiūra ir demonstracija vietoje. Duomenys: Modelis: Kuper Optimat KDF 660 Būklė: naudota, veikianti Staklės prijungtos ir gali būti išbandytos Iodpfx Afjxu Iafewsa Paslaugos: Mašinos išvežimą ir pakrovimą galima suorganizuoti pagal poreikį. Susidomėjus arba norint susitarti dėl apžiūros, prašome susisiekti!

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Brandt KDF110 Optimat Ambition - only 1150 operating hours Manufacturer: Brandt Model: KDF 110 Year of manufacture: 2012 Machine no.: 0-261-20-6960 Control system: Easy Control 10+ Non-contact travel control, feed-regulated, with start-stop optic-indicative sensors Display: LCD, 4 x 20 characters, 4 program memory slots Configuration: Chain conveyor feed: Standard equipment with central lubrication for the transport chain. Top pressure rollers / workpiece guidance: Central control, 2 roller tracks Iedpfx Afsxvirfewja Jointing unit: 2 x 0.75 kW, 200 Hz, including DIA jointing cutter set, manual positioning via Siko digital counter, max. 3 mm removal and max. 40 mm workpiece thickness Gluing unit: A3 gluing part for hotmelt adhesive and option for PU application, magazine, pressure zone with electro-pneumatic 2-point positioning via central control Pressure zone: 1 powered roller and 2 free-running rollers for optimal and consistent compaction End trimming unit: 0.18 kW, 12,000 rpm Milling unit: 2 x 0.27 kW, 200 Hz, 12,000 rpm, counter-rotating, triple positioning (chamfer/radius R2, overhang, and straight), max. 3 mm edge thickness with Siko digital counter Profile scraper: max. 3 mm edge thickness Flat scraper: reversible blade Chain width: 80 mm Edge material (coil): 0.4 - 3 mm End trimming device: 0.4 - 3.0 mm Edge height: max. workpiece height + 5 mm Workpiece thickness: 8 - 40 mm Min. workpiece width: for workpiece thickness 8-22 mm: 70 mm For workpiece thickness 23-40 mm: 120 mm (depending on workpiece length) Workpiece overhang: 38 mm Edge cross-section: max. for PVC 135 mm² (max. 6 mm) Coil diameter: max. 830 mm Feed speed: 8 m/min Working height: 950 mm Pneumatic connection: min. 6 bar Total length: 3,672 mm Location: ex-stock 54634 Bitburg - immediately available -

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2011, Šis kraštų klijavimo įrenginys BRANDT Optimat KDF 650 C buvo pagamintas 2011 metais. Įrenginio ilgis – 5760 mm, darbinis aukštis – 950 mm. Apdirbamų ruošinių storis gali būti nuo 8 iki 60 mm, o kraštinės medžiagos storis – nuo 0,4 iki 12 mm. Reguliuojamas padavimo greitis – nuo 8 iki 18 m/min. Svoris – 2600 kg. Pasinaudokite proga įsigyti šį BRANDT Optimat KDF 650 C kraštų klijavimo įrenginį. Susisiekite su mumis dėl išsamesnės informacijos apie šį įrenginį. Iodpsw Uakqjfx Afwoa Pritaikymo sritys: Kraštų klijavimas

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 007517, Type of edge applied: thin edge, thick edge, solid wood Adhesive system: EVA, hot air Ijdpjwuz E Refx Afwoa Jointing milling unit: yes Multifunction unit: yes Top milling unit: yes Max. feed rate: 18 m/min Maximum panel thickness: 60 mm Working units: 9 pcs

Sąlyga: naudotas, Gamybos metai: 2013, Technical Data Machine length: 6060 mm Machine width: 1555 mm Machine height: 2300 mm Weight: 2600 kg Total power requirement: 21 kW (30 A) Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2820 m³/h (at 28 m/s) Technical Features and Equipment General Functions Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Double top pressure for workpiece stability Electronic thickness control Feed frequency inverter Automatic lubrication of the feed chain Automatic motor calibration Touchscreen control system Emulsion spray unit at infeed and outfeed Edge preheating Pre-milling Unit Tool diameter: 100 mm Tool height: 63 mm Diamond tool with replaceable knives Motorized removal adjustment Gluing Unit Adhesive and hot air application Heated application roller Quick-change complete unit Automatic motorized position adjustment 3 pressure rollers Edgebanding speed: 14 m/min End Trimming Unit Twin-motor unit with automatic tilting Tilting up to 15° Isdpfx Afjv Szt Dswoa THK prism guides Radius Milling Unit 2 tools Automatic adjustment in two axes Automatic overlap setting Copying Unit (2 motors) Automatic tool position change via servomotor Electromagnetic horizontal movement Vertically hydraulically damped movement

Sąlyga: naudotas, Gamybos metai: 2006, Used machine Year of manufacture: 2006 Features and technical specifications: - Equipped with gluing unit for hot-melt adhesive granules - Processing of PU adhesive granules possible, subject to adhesive processing regulations - Glue reservoir located below the glue roller - Application of glue to the workpiece via glue roller in both co- and counter-rotation - With contact heating shoe for preheating the workpiece - Automatic edge magazine for roll material and fixed lengths Isdpfx Afowkbd Eowea - Pressure zone with pneumatically driven main pressure roller and special secondary pressure rollers for consolidation of the upper and lower glue joints - Centrally adjustable upper pressure - Central manual lubricating system for the chain conveyor - Control panel at the machine infeed - End trimming saw unit: - For front and rear edge overhangs; high-precision linear guide - 2 motors each 0.18 kW - Swivel range for straight and chamfer trimming: 0-15 degrees - Flush trimming unit: - Top and bottom with vertical and horizontal tracing - Swivel range 0-15 degrees with 2 milling motors with changeable insert combination for straight/radius cuts - Digital counters enable quick and defined, i.e. repeatable settings - Two-point pneumatic adjustment of upper and lower milling motors - Scraper unit for finish processing with horizontal/vertical tracing - Extendable workpiece support up to 350 mm - Integrated track control for contactless control of processing functions. Adjustable via keyboard and LED display - Workpiece thickness: 8 - 50 mm - Edge thickness: 0.4 - 3 mm - Feed speed: approx. 9 m/min - Connected load: 4.1 kW - Compressed air connection: 6 bar Machine length: 3,150 mm Weight: approx. 750 kg Availability: short-term Location: Röllbach

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 0-261-07-2126, briaunos storis (maks.): 8 mm, darbinio aukščio: 950 mm, ruošinio plotis (maks.): 60 mm, ruošinio ilgis (maks.): 4 760 mm, No reserve price - guaranteed sale to the highest bidder! Ijdpfx Afeu Tur Rjwoa TECHNICAL DETAILS Machine type: KDN 530 C Machine length: 4,760 mm Connected load: 6 kW Weight: 1,900 kg Extraction port diameter: 2 x 100 mm Working area Feed speed: 11 m/min (optionally: 14 m/min) Workpiece thickness: 8 – 60 mm Edge thickness: 0.4 – 8 mm Roll separation: max. 3.0 x 45 / 0.8 x 65 mm Working height: 950 mm MACHINE DETAILS Machine dimensions (W x H): 1,560 x 2,300 mm Voltage: 400 V, 3 Ph, 50 Hz Pneumatic operating pressure: 6 bar Noise emission level: 80–87 dB(A)

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2008, Ši BRANDT Optimat KDF 550 kraštų laminavimo staklė buvo pagaminta 2008 metais. Staklės ilgis – 5860 mm, galingumas – 11,5 kW, svoris – 2600 kg. Galima apdirbti ruošinius, kurių storis nuo 8 iki 60 mm, o briaunos storis – nuo 0,4 iki 8 mm, todėl šios staklės puikiai tinka tiksliems kraštų apdailos darbams. Pasinaudokite proga įsigyti BRANDT Optimat KDF 550 briaunų laminavimo stakles. Susisiekite su mumis dėl daugiau informacijos. Iedewug Uwspfx Afwsa Pritaikymo sritys: Kraštų laminavimas

Sąlyga: naudotas, Gamybos metai: 2002, Mašinos ilgis: 6240 mm Svoris: 2400 kg Prisijungimo galia: 14 kW Ištraukimo skersmuo: 120 / 140 mm Sandėliavimo vieta: Nattheimas Isdevvkfwopfx Afwja

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, I am selling a fully equipped edge banding machine, BRANDT Optimat KDF 220 C, year of manufacture 2014: Configuration: - Infeed fence manually adjustable - Jointing unit manually adjustable - Edge banding with EVA glue / PUR glue possible - Pressure zone for materials manually adjustable - End trimming saws pneumatically adjustable - Top and bottom radius trimming manually adjustable - Corner rounding unit, 1-motor, manually adjustable - Radius scraper R2 pneumatically disengageable (with set of R1 included) - Control panel Ijdpfou N T Ewjx Afwoa Working height adjustable via servomotor Material height: 8-50 mm Edge material thickness: 0.4-3 mm Feed speed: 10 m/min Total length incl. feed table: 4150 mm Total weight: 1320 kg Very good condition, fully functional! Including complete documentation and CE certification. Available immediately.

Sąlyga: labai geros būklės (naudotas), Klijavimo aparatas Kapavimas Du tiesūs frezai Du užapvalinantys frezai Iedjxdy Slspfx Afwsa

Gamybos metai: 2004, Sąlyga: nepatikrintas (naudotas), Brandt Optimat briaunų apdirbimo staklės su briaunos nupjovimu. Įsigyta kaip naudota mašina produktų linijai, kuri neprasidėjo. Buvo veikianti demontavimo metu, beveik nenaudota. Isdpfx Ajxguhgofwoa

Sąlyga: geras (naudotas), Gamybos metai: 2008, mašinos/transporto priemonės numeris: 0-260-20-1170, Kantfräs & kap Brandt Typ: Optimat FTK 130 Nr: 0-260-20-1170 År: 2008 Ijdoq Ehpaepfx Afwea FTK 130 är utvecklad som ett komplement till kantlistningsmaskiner. Huvudområdet för FTK 130 är formade arbetsstycken där både inre och yttre radier kan bearbetas. Även raka arbetsstycken kan enkelt bearbetas. Trimningsteknik för formade arbetsstycken: För mindre snickerier erbjuder FTK 130 en flexibel och kostnadseffektiv lösning för deras trimningsbehov. För att bearbeta både inre och yttre former är trimningsmotorerna vertikalt monterade. Fräs- och kapenheter för samtidig övre och undre radie-/renfräsning av överblivet kantlistmaterial på arbetsstycken med raka kanter eller formade detaljer med inre och yttre radier. Kapskärningsenhet för exakt avkapning av överblivet listmaterial i fram- och bakkant i arbetsriktningen. Teknisk information: Fräsenhet: Arbetsstyckets tjocklek: ca 12–55 mm Arbetsstyckets minsta bredd: ca 30 mm Minsta inre radie: ca 35 mm Max kantlisttjocklek: ca 3 mm Fräsverktyg: 2xWPL radiefräs r=3, diameter 67x21x16 mm Fräsmotorer: 11 000 v/min Kapenhet: Arbetsstyckets tjocklek: 12–55 mm Max kantlisttjocklek: 3 mm Klingdiameter: 100 mm Kapsnitt: 3 mm Centrumhål: 36 mm Tryckluft: 6 bar, anslutning 1/2", ca 2000 PA Luftförbrukning per slag: ca 10 NL Utsugningsanslutning: diameter 80 mm, 510 m³/h, lufthastighet 28 m/s El: 400 V, 2,5 kW, 50 Hz, 3-fas, 16 A Mått: 1130 x 765 x 1480 mm (lxbxh) Vikt: 320 kg Lager nr: 2001877BXA

Sąlyga: naudotas, Gamybos metai: 1985, Edge thickness: 0.4 – 12 mm Workpiece thickness: 10 – 55 mm Minimum workpiece length: 160 mm Minimum workpiece width: 65 mm Feed rate: 13 m/min Iodpsc Tmygjfx Afwoa Pneumatic connection: 7 bar Total length: 5220 mm Weight: 1950 kg Heating tub with Quickmelt hot melt adhesive granulate Glue roller rotation for synchronized and counter-rotation Edge magazine for PVC rolls and strip edging Motorized upper pressure adjustment Pneumatically actuated pressure rollers Swiveling control panel at machine infeed All units are track-controlled – i.e., all workpiece-actuated limit switches are omitted End trimming Milling combination for bevel and radius milling with 2 swiveling units (1 unit with combination cutter for radius/straight, 2nd unit with bevel cutter) with pneumatic adjustment Scraper – with pneumatic adjustment Buffing Central lubrication for chain track Quick-change glue tank Digital counters Electronic frequency converters with integrated motor brake Edge monitoring with fault display Infrared heating element CE compliant Note on used machines: • Technical details subject to error and prior sale. • Prices listed are ex-location, loaded free on truck. • Machines have been cleaned and function-tested. • All machines are sold as viewed, without any warranty claims. Buyers are free to inspect the machines at their location. • Special agreements are only valid in written form. (Enquiries will only be answered if your address and telephone number are provided!)

Sąlyga: naudotas, Gamybos metai: 2000, mašinos/transporto priemonės numeris: 0-260-06-0228, Foot control 1200 x 800 mm Extraction nozzle 80 mm y Pneumatic connection Cable + plug 16 A 1 set of operating tools 1 set of tracing wheels Iedpfxeigadlj Afwsa

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, I am selling a fully equipped edge banding machine, BRANDT Optimat KDF 440 C, year of manufacture 2015: Configuration: - Infeed fence adjustable via servo motor - Jointing unit adjustable manually - Edge application with EVA glue / Airtec System Schugoma - Material pressure zone adjustable manually - End trimming saws adjustable pneumatically - Top and bottom radius milling units adjustable via servo motor - Corner rounding unit with 2 motors, adjustable manually - Radius scraper R2 pneumatically switchable - Flat scraper pneumatically switchable - Polishing brushes - Separator and cleaning spray units at infeed and outfeed - Control panel Working height adjustable via servo motor Material height: 8–60 mm Edge material thickness: 0.4–8 mm Feed speed: 11 m/min Total length including feed table: 5,573 mm Ijdpfx Afswun Irswsa Total weight: 1,860 kg Only 592,198 meters glued. Very good condition, fully functional! Includes complete documentation and CE certification. Available immediately.

Sąlyga: labai geros būklės (naudotas), klijavimo aparatas guolotina skersinio pjovimo staklės frezavimo staklės grandiklis poliravimo mašina Ijdpettu Riofx Afwja

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: C-261-04-2523, X ašies padavimo greitis: 9 000 m/min, pjūklo disko skersmuo: 100 mm, sukimosi greitis (maks.): 12 000 aps./min, The submission of a bid obligates the buyer to collect the item within the specified period, no later than 14.10.2025! Isdpfx Afoxhgk Aewja TECHNICAL DETAILS Edge Processing Edge Type: Straight edges Edge Material: Cut strips, lip-cut strips, roll material Feed Speed: 9 m/min Edge Material Thickness: 0.4–3.0 mm Lip Thickness: 0.4–3.0 mm Edge Material Height: 55 mm Roll Diameter: 800 mm Spindle Speed: 12,000 rpm Max. Tool Dimensions: 100 × 62 × 30 mm Extraction Port Ø: 120 mm Workpiece Data Workpiece Thickness: 8–50 mm Positioning Accuracy: 0.1 mm Edge Banding Edge Type: Straight edges Edge Material: Roll material Max. Tape Cut: 3 × 30 mm or 0.8 × 45 mm Operating Pressure: 6 bar Edge Gluing Unit Spindle Speed: up to 1,800 rpm End-Trimming Unit Motor Speed: 12,000 rpm Saw Blade Diameter: 100 mm Cutting Width: 2.6 mm Bore Diameter: 32 mm Workpiece Thickness: 45 mm Max. Edge Material Height: 3 mm Edge Material Angle: 0–15° Edge Material Cross-Section: 135 mm² Flush Milling Unit Spindle Speed: 12,000 rpm Max. Workpiece Thickness: 8–50 mm Max. Edge Thickness: 3 mm Straight Tools: 2 × WPL milling cutter Ø 50 × 12 × 16 mm, z = 4 Combination Tools r = 3 mm: 2 × trimmer Ø 56 × 50 × 12 × 16 mm, z = 4 MACHINE DETAILS Electrical Data Voltage: 400 V Frequency: 50 Hz Fuse Rating: 16 A Control Voltage: 24 V

Sąlyga: naudotas, Type: OPTIMAT F 13 Year of manufacture: 2001 Condition: function tested, very good, used - Workpiece thickness 16 to 55 mm - Minimum workpiece width 30 mm - Minimum inner radius 35 mm - Maximum edge thickness 3 mm - 2 milling motors 0.4 kW each - Extraction port 80 mm Iodpeud U Iysfx Afwoa

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, ruošinio aukštis (maks.): 50 mm, briaunos storis (maks.): 3 mm, sukimosi greitis (maks.): 10 960 aps./min, Įranga: CE žymėjimas, Nėra minimalios kainos – garantuotas pardavimas už aukščiausią pasiūlytą kainą! TECHNINIAI DUOMENYS Maksimalus plokštės storis: 50 mm Minimalus panelės aukštis: 8 mm Maksimalus panelės aukštis: 50 mm Minimalus briaunos storis: 0,4 mm Maksimalus briaunos storis: 3 mm Pozicijų skaičius: 1 1 agregatas Agregatas: galų apdirbimas Variklių skaičius: 2 Automatinis įjungimas pagal laiką: taip Variklio galia: 0,18 kW Apsisukimų dažnis: 10 800 aps./min. 2 agregatas Agregatas: briaunų freza Variklių skaičius: 2 Automatinis įjungimas pagal laiką: taip Variklio galia: 0,27 kW Apsisukimų dažnis: 10 960 aps./min. 3 agregatas Agregatas: briaunų grandiklis Valdymo sistema: BFS ĮRANGOS DUOMENYS Sumontuota bendra galia: 4 kW ĮRANGA Viršutinis spaudimas Spaudimas laisvais volais Pagrindinė panelės atrama Ritės magazinas EVA klijavimo sistema Karštų klijų talpa Iodpfx Afsxw Tugswja Briaunos presavimo volelių takas Presavimo volų skaičius: 3 CE žymėjimas

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, X ašies padavimo greitis: 11 m/min, ruošinio aukštis (maks.): 40 mm, briaunos storis (maks.): 6 mm, sukimosi greitis (maks.): 12 000 aps./min, Įranga: CE žymėjimas, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. feed speed: 11 m/min Maximum panel thickness: 40 mm Minimum panel height: 8 mm Maximum panel height: 40 mm Minimum edge thickness: 0.3 mm Maximum edge thickness: 6 mm Iodpfxjxw Ttvo Afwsa Maximum spindle speed: 12,000 rpm MACHINE DETAILS Unit for formatting cuts Unit: Trimming Automatic engagement by timer Motor power: 2.2 kW Pre-heating edge lamps Coil magazine Number of positions: 1 Glue application system Hot melt glue pot Pressure roller section for edge Number of pressure rollers: 3 Edge Processing Unit 1 Unit: End trimming Number of motors: 2 Automatic engagement by timer Motor power: 0.18 kW Maximum speed: 12,000 rpm Edge Processing Unit 2 Unit: Top/bottom trimming (milling) Number of motors: 2 Motor power: 0.27 kW Maximum speed: 12,000 rpm Edge Processing Unit 3 Unit: Multifunction Number of motors: 1 Motor power: 0.35 kW Maximum speed: 12,000 rpm Edge Processing Unit 4 Unit: Scraper Edge Processing Unit 5 Unit: Buffing Number of motors: 2 Motor power: 0.1 kW Total installed power: 13 kW EQUIPMENT Control system PC 16 CE marking