Berger pirkti naudotą (327)

Sąlyga: naudotas, Grinding diameter: 350, 450 mm Grinding length: 600 mm Gedod Ih D Espfx Acujkc Center height: 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivels: 360° Grinding headstock swivels: 180 ± ° Grinding spindle speed: 1500, 1700, 2200 rpm Infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling: ±10° Longitudinal table travel: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Maximum workpiece weight (unsupported): 130 kg (including clamping) Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Space requirements approx.: 3.1 x 2.0 m As a global leader in Kellenberger overhaul/retrofit, we not only deliver machines in as-new quality with warranty, but also provide service for your machines, metrically overhauled and freshly painted. Photo shows a machine already delivered, possibly with different options. Machine is equipped standard with central lubrication and roller guides in the X-axis flatway, as well as air lift-off in the grinding headstock. BEMA Standard Equipment: - Digital readout in 2 axes. X-axis resolution: 0.5 μm - Grinding spindle speed display - Infinitely variable grinding spindle speed 70–100% - Infinitely variable internal grinding spindle speed 70–100% - Workpiece spindle drive powered by three-phase motor, infinitely variable via frequency converter Available options at extra cost: - Encoder with digital display in workpiece headstock - Encoder with digital display in grinding headstock (height adjustment via spindle not possible) - Sine bar - New robust internal grinding attachment, 80 mm or 100 mm diameter, with height adjustment - Increase center height to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Draw tube for chuck Of course, our fully overhauled machines come with a 12-month warranty (valid in neighboring countries only). Further accessories on request. The machine tool does not currently comply with the essential health and safety requirements as set out in BetrSichV 2015. An assessment of the necessary minimum protection level must be determined by a risk assessment in accordance with BetrSichV.

Gamybos metai: 2010, Sąlyga: paruoštas naudoti (naudotas), Usable volume: 7.7 m³, max. temperature: 250°C, heating capacity: 54 kW, air flow rate: 15 m³/min. Gkodoilhucepfx Acuec

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1315/451, Completely overhauled: Mechanics, geometry, hydraulics, and electrical components (checked and/or replaced) Grinding wheel headstock Disassembly, cleaning of parts, replacement of worn and defective parts, motor overhaul, bearing replacement, belt replacement, spindle disassembly, replacement of seals and O-rings + adjustment. Newly painted. Workpiece headstock Disassembly, cleaning of parts, replacement of worn and defective parts, motor overhaul, belt replacement. New spindle bearings. Newly painted. Tailstock Disassembled, inspected, overhauled. Hydraulics Disassembled, motor check, replacement of hoses, defective and worn parts. Hydraulic block inspected. X Axis Disassembly, replacement of worn parts such as O-rings, seals, rings, etc., overhaul of hydraulic piston, grinding of tables. Z Axis Disassembly, grinding of tables, replacement of worn and defective parts, hydraulic piston overhaul, newly painted. Electrical cabinet Complete inspection, various relays replaced. Painting Colors: White RAL 9003 and Grey RAL 7011 Geometry according to manufacturer’s protocol. Gkedpfx Acjw U Ry Neujc Inspection and cleaning of various accessories. Origin CH Voltage 380 / 50 / 3 Net weight approx. 2200 kg Customs tariff number 8460.2920 TECHNICAL SPECIFICATIONS Nominal centre distance 600 mm Max. centre distance (extended headstock) 750 mm Centre height, standard 125 mm Centre height with interchangeable shoes for headstocks 175 to 250 mm Max. workpiece diameter (125 mm centre height) 250 mm Max. workpiece diameter with interchangeable shoes 350 to 500 mm Table swivelling in either direction 10° Max. length for surface grinding (max. width = 200 mm) 900 mm Table speed with continuously variable hydraulic control up to approx. 6 m/min Table reversal dwell time 0-5 sec. Wheel for external grinding, diameter-width-bore 400x50x127 mm Wheel for surface grinding 250x13x76 mm Grinding spindle speeds 1500/1700/2200/3600 rpm Grinding headstock swivel 270° With index every 90° Vertical movement of grinding headstock, centre height 125-350 mm Cross travel of grinding headstock 285 mm Hydraulic rapid advance/retract stroke 40 mm Intermittent feed of the wheel by table reversal 0.001-0.03 mm/dia Continuous plunge grinding feed 0-0.9 mm/dia Micrometric feed stop, graduated 0.001 mm/dia Workpiece headstock swivel 360° Continuously variable workpiece spindle speed, standard/special 20-400 / 10-400 rpm Workpiece headstock/tailstock internal taper 5/3 Morse Grinding headstock motor, approx. 4 HP All technical details are given without obligation and subject to errors or omissions.

Sąlyga: naudotas, Gamybos metai: 1998, Naudota mašina Pagaminimo metai: 1998 Ši mašina skirta gręžti kampinius laikiklius, viršutines varčias bei alyvas laisvame arba presuotame rėmo medyje. Jutiklis veikia griovelyje, o 8 sustojimai kampiniams laikikliams ir viršutinėms varčioms, taip pat įstatomai ir dalytuvui, aktyvuojami automatiškai, kai dedama mediena. Mašina turi automatinę programos eigą su elektriniu valdymu gręžimo varikliams, iššaukiama saugos kojiniu pedalu. Pneumatinė jungtis R 1/4" 5-6 bar Nusiurbimo greitis 25 m/sek. Nusiurbimo antgalio skersmuo 120 mm Elektros jungtis 0,75 kW Gkjdpfx Aew Naabocuec Užimamas plotas 2950 x 650 x 1100 mm Prieinamumas: greitu metu Sandėliavimo vieta: Flörsheim

Sąlyga: naudotas, Hidraulinė rėminė presas Schafberger & Sprödhuber su rankiniu elektriniu reguliavimu. Gkodpfow I Dbmsx Acuoc Detalės aukštis: maks. apie 2 400 mm Detalės plotis: maks. apie 4 250 mm Valdymas: rankinis

Sąlyga: labai geros būklės (naudotas), PLASTIC PIPE CUTTER ROCUT 110 BY ROTHENBERGER 55035 ROTHENBERGER Pipe Cutter for 50-110 mm pipes, Manufacturer Code 55035 TECHNICAL DATA Pipe diameters: 50, 75, 110 mm Bevel angle: 15° PRODUCT DESCRIPTION This tool is designed for cutting and bevelling thin- and thick-walled pipes made of PVC, PE, PE-X, and PVDF, as well as sound-insulated sewage pipes. Simultaneous bevelling around the entire circumference of the pipe thanks to a steel cutting spindle with an automatic tracer. Centrically aligned and secure clamping on pipes, taking dimensional tolerances into account, thanks to steplessly adjustable jaw pressure with spring compensation. Gjdpfx Aovb Ik Ijcuekc

Sąlyga: naudotas, Grinding diameter: 250 mm Grinding length: 1000 mm Centre height: 125 mm Grinding wheel diameter: 500 mm Grinding wheel width: 80 (100) mm Bore: 203.2 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: +/- 360° Grinding spindle headstock swiveling: +/- 0° Infeed (incremental): 0–9.99 mm/Ø Infeed (continuous): 0–9.99 mm/Ø Table swivel: +/- 10° Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (overhung): 130 kg incl. clamping Cross traverse: 270 mm Tailstock quill taper: MK3 Quill stroke: 30 mm Total power requirement: 5.5–7.5 kW Machine weight approx.: 2.7 t As a global leader in the field of Kellenberger overhauls/retrofits, we are not only able to deliver machines in as-new condition with warranty, but can also offer you service for your machines. Geometrically overhauled and newly painted according to Kellenberger measurement protocol. Completely new electrics with new infeed control. Photos show a previously delivered machine of the same design, but with 1500 mm centre distance and universal grinding head instead of the 500 mm wheel head, purely for external cylindrical grinding purposes. Equipment: Gjdpfx Acod Ih Egeuokc - 2-axis digital readout - New DGS paper band filter Optional at extra charge: - Semi-automatic dressing - Dressing size compensation - GAP Control - Measuring automation - Safety doors Electronically controlled infeed system with stepper motor drive. Hydraulic table longitudinal and rapid traverse movement. Powerful, non-swiveling grinding spindle headstock for production external cylindrical grinding operations. Areas of application: Machining of high-precision components in the gearbox, machine tool, and general mechanical engineering sectors. Pair grinding for the hydraulics industry. At present, the machine tool does not meet the basic safety and protection requirements such as those specified in BetrSichV 2015. The required minimum safety objective must be determined by means of a risk assessment according to BetrSichV.

Gamybos metai: 2021, Sąlyga: paruoštas naudoti (naudotas), Savybės: automatinis nenutrūkstamas iškrovimas su kilimu, nenutrūkstamas padavimas su strypais, kairėje traukos žyma, dešinėje stūmimo žyma, greito užspaudimo rėmas įrankiui, apatinė atmušimo stotis, viršutinė atmušimo stotis, du keičiami rėmai apatinei atmušimo stočiai. Be išpjaustymo plokščių. Apdirbamos medžiagos: min. popierius 90g/m², maks. pilnakartonis 2000g/m², maks. gofruotas kartonas/su MasterSet 4/2mm, maks. lapo formatas 760x1060mm, min. lapo formatas/su MasterSet 300x350/350x400mm, maks. pjaustymo spaudimas: 2,6MN/260t, maks. mašinos greitis: 8000 lapų/val., maks. padavimo paketo aukštis be non-stop/režime 1500/1200mm, maks. padavimo paketo svoris: 1500kg, maks. iškrovimo paketo aukštis: 1400mm, maks. iškrovimo paketo svoris: 900/1340kg. Darbo valandų rodmuo: 1525h. Galima apžiūrėti vietoje. Gjdsw Tc R Ropfx Acuekc

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 20780, Fanuc Oi-MB - Spindle HSK50 - 50-10,000 rpm 5 Axes XYZAC Year of Manufacture: 2005 Country of Origin: CH (Switzerland) Voltage: 3x400V/50Hz Dimensions: 1170x2270x2260 mm Net Weight: 8,000 kg TECHNICAL DATA (standard) MEASUREMENT SYSTEMS Gjdpefbt R Ejfx Acuskc X, Y, and Z Axes: Resolution 3 µm A-Axis: 0.0001° C-Axis: 0.0001° GRINDING HEAD, SPINDLE Power: 15 kW Spindle speed: 50 – 10,000 rpm Spindle taper: HSK 50 Max. wheel diameter: up to 250 mm Max. number of wheels: 6 LINEAR AXES X-Axis, Travel: 380 mm Max. speed: 20,000 mm/min Resolution: 0.0001 mm Ratio: 1:1 Drive: 1.0 kW, 3 Nm Y-Axis, Travel: 300 mm Max. speed: 5,000 mm/min Resolution: 0.0001 mm Ratio: 24:4 Drive: 1.0 kW, 8 Nm Z-Axis, Travel: 280 mm Max. speed: 20,000 mm/min Resolution: 0.0001 mm Ratio: 1:1 Drive: 1.0 kW, 3 Nm SWIVEL AXES C-Axis, Angle: 210° Speed: 72°/sec Resolution: 0.0001° Drive: 1.0 kW, 8 Nm C'-Axis, Angle: +/- 180° Max. speed: 90°/sec Drive: hydraulic A-Axis DMR 100 Rotation: infinite / infinite Max. speed: 225°/sec / 3600°/sec Resolution: 0.0001° / 0.0001° Power: 1.0 kW / 5.8 kW Taper: ISO 50 Center height: 210 mm / 210 mm TABLE (Narrow workpiece / Wide workpiece / Total) Length: 500 mm / 500 mm / 1000 mm Width: 145 mm / 330 mm ELECTRICAL CONNECTION: 9 kW / 15 kW Rated power: 27 kVA / 36 kVA Voltage: 3x400 V AC Frequency: 50 Hz Main fuse: 63 A Subject to technical changes or errors; technical data provided without obligation.

Sąlyga: naudotas, Grinding diameter: 350 mm Grinding length: 1,500 mm Centre height: 175 mm Machine weight: approx. 3 t Gkjdpst Ii Rrefx Acuoc High-end Kellenberger 1500U Ideal for spindle manufacturers or spindle refurbishers - BEMA internal grinding attachment with separate, cooled motor Grinding spindle and internal grinding spindle motor are electrically interlocked! Internal grinding spindle can only be activated when in position. A quantum leap in safety technology. - Infinitely variable grinding spindle speed: 1,000–1,500 rpm - Infinitely variable internal grinding spindle speed: 0–100% - Digital display of grinding spindle speeds - Swivel angle display for the upper table - Swivel angle display for grinding spindle headstock - Marposs contact sensor for external grinding only - Marposs fluid contact sensor for internal grinding - Centre height up to 250 mm possible The machine is already delivered. An identical machine can be configured with additional options. The machine tool currently does not comply with the fundamental safety and protection requirements as stipulated in the German Operational Safety Ordinance (BetrSichV) 2015. An increase of the required minimum safety objective must be determined by means of a risk assessment according to BetrSichV.

Sąlyga: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 32461/2384, Origin of manufacture: Switzerland Voltage: 380 / 50 / 3 (V/Hz/Ph) Net weight: 2200 kg TECHNICAL DATA Nominal distance between centres: 600 mm Maximum distance between centres (workpiece spindle stock and tailstock retracted): 750 mm Standard centre height: 125 mm Centre height with interchangeable intermediate plate (workpiece spindle and tailstock): 175 → 250 mm Maximum possible swing diameter (125 mm centre height): 250 mm Gkedpfx Acsd Amifouec Maximum possible swing diameter with intermediate plates: 350 → 500 mm Table swivelling range, each side: 10° Maximum grinding length (table width = 200 mm): 900 mm Table speed, hydraulically and steplessly adjustable: approx. 6 m/min Table reversal delay: 0–5 sec Grinding wheel for cylindrical grinding, diameter x width x bore: 350/400 x 50 max. x 127 mm Grinding wheel for surface grinding, diameter x width x bore: 250 x 13 x 76 mm Grinding spindle speeds (rpm): 1500 / 1700 / 2200 / 3600 Swiveling range of grinding spindle headstock: 270°, lockable every 90° Vertical travel of grinding spindle headstock (centre height): 125–350 mm Cross travel of grinding slide: 285 mm Hydraulic rapid advance and return of grinding slide: 40 mm Feed per table reversal, stepless: 0.001–0.03 mm/rev Feed amount for plunge grinding: 0–0.9 mm/rev Micro stop for feed per division: 0.001 mm/rev Swiveling range of workpiece spindle stock: 360° Workpiece spindle speeds, steplessly adjustable normal/special: 20–400 / 10–400 rpm Internal taper, workpiece spindle/tailstock: Morse 5/3 Grinding spindle motor, approx.: 4 HP Errors and omissions excepted. Technical data provided without obligation. Inventory No. 2170089, Machine Accessories List: 1 workpiece spindle headstock MK5 1 sine bar without dial comparator 1 grinding spindle headstock with 4 drive pulleys 1 tailstock MK3 1 collet draw system with collet and reducing sleeve B32 1 internal grinding attachment with Fischer quill UJ50x250 – drive pulley Ø 48 for 14,000 rpm 1 rotatable disc dressing device with 50 mm base 1 table rotation stop without comparator 1 coolant system by decantation 1 ejector 1 balancing bar

Sąlyga: naudotas, Gamybos metai: 1982, Grinding diameter 630 mm Grinding length 600 mm Centre height 320 mm Machine equipped with reinforced workpiece headstock for unsupported grinding of heavy workpieces. Gjdpfx Acev Dxxzjuekc The machine will undergo a major service/partial overhaul including a geometry inspection report in accordance with Kellenberger new machine standards. The machine tool currently does not meet the essential safety and protection requirements as specified in the German Ordinance on Industrial Safety and Health (BetrSichV 2015). The necessary minimum safety objectives must be determined in the course of a risk assessment in accordance with BetrSichV.

Sąlyga: geras (naudotas), Gamybos metai: 1999, veikimo valandos: 16 000 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 650341, Year 1999 with Fanuc 18 TB – 3 axes XZB Marposs E30/E20 Country of manufacture: CH Voltage: 400V/50Hz/3ph Dimensions: 410 x 220 x 190 cm Net machine weight: 5000 kg TECHNICAL SPECIFICATIONS CNC: Fanuc 18TB Intermediate section Fixed intermediate section: Grinding head R Swiveling section with manual indexing 2.5°: R / RS / UR / URS -210° to +30° Swiveling section with automatic indexing 2.5°: R / RS / UR / URS -210° to +30° B axis, resolution 0.1'': R / RS / UR / URS -210° to +30° Standard workhead Swivel range: -10° (+100° Spindle speed (continuous): 6 – 600 min⁻¹ Internal taper mount: MT5 Reduction sleeve: MT5/MT4 Short taper external mount: DIN 55026 / Size 5 Admissible load: 160 Nm Guaranteed roundness for chucking operations Standard: 0.5 µm Option: 0.2 µm Workpiece weight between centers: 150 kg Tailstock Taper mount: MT4 Quill stroke: 50 mm / 2° Option: micrometric movement with correction (Ø +/- 150 µm) Grinding wheel data Diameter 300 mm: 27 m/s Diameter 400 mm: 35 m/s Diameter 500 mm: 45 m/s UR grinding head Power: 9.2 kW / 12.5 HP Left wheel mount, max.: Ø 500 x 80 mm Gkodpfow T Tb Hjx Acuec Additional right wheel, max.: Ø 400 x 63 mm Internal grinding device: HJN 828 spindle Lower table (Z axis) Distance between centers: 1000 mm Max travel: 1150 mm Max speed: 15 m/min Max resolution: 0.1 µm Upper table Distance between centers: 1000 mm, swiveling 0 to 9° Grinding slide (X axis) Max travel: 320 mm Max speed: 7.5 m/min Max resolution: 0.1 µm Pneumatics Minimum connection: 6 bar Air consumption: approx. 0.6 m³/h Coolant Max pressure connection: 3 bar Required space (version 1000): 3600 x 2000 mm All technical information is provided without obligation and subject to errors and omissions.

Sąlyga: naudotas, Gamybos metai: 1982, Grinding diameter 630 mm Grinding length 600 mm Centre height 320 mm The machine was overhauled according to the Kellenberger inspection protocol and newly repainted. The prone-to-failure Güttinger control system was replaced with the modern BEMA X control system. This means the machine also received a completely new electrical system as part of this upgrade. Machine equipped with a reinforced workpiece spindle head for chuck grinding of heavy workpieces. Currently, the machine does not meet the fundamental safety and protection requirements specified in the German Ordinance on Industrial Safety and Health (BetrSichV 2015). Raising the required minimum safety standard must be determined by means of a risk assessment according to BetrSichV. Gsdpfx Acevq R Uzouokc

Sąlyga: naudotas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivel range: 360° Grinding headstock swivel range: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivel range: ±8° Longitudinal table travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. cantilevered workpiece weight: 130 kg incl. clamping Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space required approx.: 4.2 x 2.0 m As a global leader in Kellenberger overhauls/retrofits, we not only deliver machines in as-new condition and with warranty, but can also provide service for your machines, including recently delivered machines, with additional options such as: - Splash guard doors - X-axis enclosure - Grinding headstock swivel angle display Available at extra cost. Geometrically overhauled and newly painted with original electrics. The machine features central lubrication and roller guides in the flat bed of the X-axis as well as pneumatic lift-off in the grinding headstock as standard. - Digital readout in 2 axes. X-axis resolution: 0.5 μm Options: - Rotary encoder with digital display in the workpiece headstock - Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) - New, robust internal grinding attachment, diameter 80 mm or 100 mm with height adjustment - Increased centre height up to a maximum of 225 mm - Variable speed control for the grinding spindle Gkjdpfxeuxftxj Acusc Includes: - Operating tools - Clamping tube for chuck Further accessories available on request. The machine tool does not currently comply with the basic safety and protection requirements as specified in the 2015 Industrial Safety Regulation (BetrSichV). The necessary minimum safety objectives must be determined by means of a risk assessment in accordance with BetrSichV.

Sąlyga: naudotas, Gamybos metai: 2010, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Control unit: Fanuc 310is Completely mechanically overhauled. Includes grinding process setup and tooling for one part. Original photo of the machine from EMO 2010. CNC control: GE Fanuc 310is Hand panel for CNC control: GE Fanuc With Wenger loader Rotary part with automatic 1° indexing Grinding head UR 1-2-3 Grinding wheel configuration left: 500 x 80 mm Grinding wheel configuration right: 400 x 63 mm Operating unit for a high-frequency internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through the workpiece spindle Dressing device on the upper table Swiveling holder for PCD diamond plates Base module for KEL-TOUCH contact sensor and KEL-BALANCE balancing units KEL-TOUCH contact sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH at the workpiece spindle headstock for internal and external grinding Preparation for measuring control systems Movomatic ESZ 400 or Marposs P7 ME Gkjdpsvdk N Ejfx Acuec Preparation for external filtration unit Coolant cut-off for table devices Fully enclosed emulsion Mist extraction unit for emulsion Maintenance unit for pneumatic auxiliary functions Preparation for KEL-VITA gantry loader KEL-POS, MOVOMATIC: probe C25 Hydraulic preinstallation for Arobo steady rest

Sąlyga: naudotas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Center height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK 5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivel: 360° Grinding headstock swivel: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental feed per stroke: 0.001–0.030 mm/Ø Gkedpfxsv I Eq Se Acujc Continuous feed: 0–0.95 mm/Ø Table swivel: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight (overhung): 130 kg incl. clamping device Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Floor space approx.: 4.2 x 2.0 m Available immediately, naturally with 12 months warranty! Geometrically overhauled and newly painted with new electrics, in KELLENBERGER quality! - Digital readout on 2 axes. X-axis resolution: 0.5 µm - Modern workpiece headstock with MK5 taper - Modern tailstock with MK3 taper - Modern hydraulic unit - Paper band filter Further accessories available on request. At this time, the machine tool does not comply with the fundamental health and safety requirements as stipulated in BetrSichV 2015. An increase to the required minimum safety target must be determined by means of a risk assessment in accordance with BetrSichV.

Sąlyga: naudotas, Gamybos metai: 1978, Grinding diameter: 500 mm Grinding length: 500 mm Centre height: 250 mm The URF model is designed for both single-piece and series production of highly precise workpieces clamped in a chuck, on a faceplate, or on a magnetic chuck, with a maximum load capacity of 330 Nm including clamping devices. This machine type is characterized by its compact and robust construction, ease of operation, and high versatility, as well as short changeover times for external, face, and internal grinding processes. Fields of application: - Toolmaking Godpsvx Dvnjfx Acuekc - Mould making - Gauge manufacturing External grinding wheel diameter: 400 mm Face grinding wheel diameter: 225 mm Internal grinding device for spindle diameters of 70 mm; 80 mm available upon request. The machine has been completely overhauled: - New control cabinet - Modern hydraulic unit - Reinforced workpiece spindle head (see photo) - 2-axis digital readout by Fagor - Sine bar for precise adjustment of the swivel angle Photos show current overhaul status. Delivery time: approx. 3 weeks from order.

Sąlyga: naudotas, Gamybos metai: 2002, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6 / 3.5 m Photos show identical machine with centre height 225 mm Base machine: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding head UR with T1-T2-T3 Standard equipment: - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - B-axis infinitely variable, high-resolution - Marposs measuring system for tool measurement - Active longitudinal positioning - GAP control on T1 and T2 by ELASO, contactless integration in the control interface - Semi-automatic balancing by ELASO, integrated in the control interface - Tailstock with manual retraction - Workpiece spindle head MK5 with short taper mount DIN 55026 - Internal grinding attachment, belt driven Options available at extra cost: - New high-precision workpiece spindle head with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface, 24,000 rpm with integrated GAP sensor (lead time applies) - CNC-controlled C-axis - Non-circular (polygon) grinding - Hydrostatic lead screw in X - New hydrostatic unit with only 1 pump and accumulator for improved energy efficiency Gsdsuxfucspfx Acuekc - Monitoring of water content in the hydrostatic system - Extraction system Further options available on request Mechanical overhaul: - Complete machine overhauled in accordance with Kellenberger test protocol - New easy-maintenance enclosure - New paintwork Electrical overhaul: - New, modern CNC CYLINDRICAL GRINDER CONTROL with BEMA grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z axes - New absolute rotary encoder (for B-axis) Control system: The grinding software consists of a basic license and various optional modules depending on the machine’s equipment. Basic software features: - External and internal oscillation grinding - External and internal plunge grinding - External and internal face oscillation grinding - External and internal face plunge grinding - External and internal cylindrical oscillation grinding - External and internal radius grinding, radius dressed on the wheel - Semi-automatic oscillation grinding - Workpiece zero setting - Wheel zero setting - Measurement of dressing diamonds - 2 form diamonds - 1 form diamond or dressing roll (dressing roll required) - Form roll (dressing roll required) - 3 flat dressing units - Corrections - Z-position measurement (probe required) - GAP contact (touching device required) OPTIONS available at extra cost: Profile plunge grinding software: - External and internal profile plunge grinding with profile wheel Profile grinding software: - External and internal profile grinding with straight wheel Thread grinding software: - Single- and multi-start external and internal thread grinding with profile dressed on the wheel - Dressing of single- and multi-rib wheels - Flank angle freely selectable Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-round plunge grinding: - External and internal non-round oscillation grinding Non-round grinding software: Precondition for non-round grinding is equipping the workpiece spindle with a high-resolution rotary encoder to enable operation as a C-axis. The non-round...

Sąlyga: naudotas, Grinding diameter: 250 mm Grinding length: 600 mm Godpjd Ih Ehsfx Acujkc Centre height: 125 mm Grinding wheel diameter: 500 mm Grinding wheel width: 80 (100) mm Bore: 203.2 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivels: +/- 360° Grinding headstock swivels: +/- 0° Plunge feed per stroke: 0–9.99 mm/Ø Continuous feed: 0–9.99 mm/Ø Table swivels: +/- 10° Table longitudinal movement: 700 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Maximum workpiece weight – between centres: 130 kg including clamping Cross-slide travel: 270 mm Tailstock quill taper: MT 3 Quill travel: 30 mm Total power requirement: 5.5–7.5 kW Machine weight approx.: 2.7 t As the world’s leading company in Kellenberger overhauling/retrofit, we not only deliver machines in as-new quality and with warranty, but also offer comprehensive service for your machines. Overhauled to Kellenberger guidelines, including brand new, modern and future-proof control system. Photo shows a previously delivered machine. – Touch-panel operation is extremely easy. – The control panel’s symbols are almost identical to the original system, eliminating the need for extensive retraining. – Diagnostic function with PLC messages and digital I/O display. – Dressing function expandable or modifiable to customer requirements. – Orientated spindle stop for the workpiece spindle available upon request. – New maximum infeed amount of 40 mm, further increases upon request. – Digital readout in 2 axes. X-axis resolution: 0.5 μm. Options: – Rotary encoder with digital display on workpiece headstock – Rotary encoder with digital display on grinding headstock (no height adjustment possible with spindle) – New stable internal grinding device for diameters 80 mm or 100 mm, with height adjustment – Increase centre height up to max. 225 mm – Variable speed control for grinding spindle Included: – New DGS paper band filter – Operation tools – Clamping tube for chuck Further accessories on request. The machine features an electronically controlled infeed system on the X-axis with stepper motor drive. Hydraulic table stroke and rapid traverse. Versatile applications in production for external and internal cylindrical grinding, or for external, face, and internal grinding in a single setup of workpieces. Optional features: – Semi-automatic dressing cycles for external and internal grinding – Automatic dressing compensation – Measurement control system The machine tool currently does not comply with the basic safety and protection requirements as stipulated in BetrSichV 2015. A hazard assessment in accordance with BetrSichV must be carried out to determine the required minimum level of protection.

Sąlyga: naudotas, Gamybos metai: 2006, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Machine weight approx. 3.5 t Machine fully overhauled in BEMA style with 12 months warranty Mechanically and visually as new Photo shows a freshly completed machine with some different options. Fanuc 21i control - Grinding head UR 1-2-3 for external/internal/planar grinding - B-axis automatic 1° Hirth toothing - Active longitudinal positioning KEL-POS Movomatic - Semi-automatic balancing device KEL-BALANCE - Left grinding wheel mount 400mm diameter Gksdpfx Acet Ii Nbeusc - Right grinding wheel mount 300mm diameter - Internal grinding attachment with belt drive - Tailstock with micrometric adjustment - Fine adjustment of upper table - Paper band filter SBP4 240l

Sąlyga: naudotas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Plunge feed per stroke: 0.001–0.030 mm/Ø Continuous feed: 0–0.95 mm/Ø Table swiveling: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (unsupported): 130 kg including clamping device Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m As a worldwide leading company in the field of Kellenberger overhaul/retrofit, we are not only able to deliver these machines in like-new condition with warranty, but also provide service for your machines. Machine geometry overhauled and newly painted, with original electrics. Photo shows a recently delivered 600U. - Digital readout in 2 axes, x-axis resolution 0.5 μm Options: - Rotary encoder with digital readout in the workpiece spindle headstock - Rotary encoder with digital readout in the grinding spindle headstock (no height adjustment possible with spindle) - New stable internal grinding attachment, diameter 80 mm or 100 mm with height adjustment - Centre height can be increased up to max. 225 mm - Variable speed control for the grinding spindle Included: - Operating tools - Draw tube for chuck Gjdpfx Ajt Ii Nuscujkc Further accessories available on request. At present, the machine tool does not comply with the essential safety and protection requirements as stipulated in the German Industrial Safety Ordinance (BetrSichV 2015). Compliance with the required minimum safety standard must be determined by a risk assessment in accordance with BetrSichV.

Sąlyga: naudotas, Grinding diameter 350 mm Gkodpot Ii Rfjfx Acuoc Grinding length 1500 mm Centre height 175 mm Left wheel 600 mm Grinding spindle head fixed, non-rotatable. Equipped with new FAGOR control system featuring BEMA cylindrical grinding interface. With new service-friendly enclosure. Completely overhauled according to Kellenberger measurement protocol.

Sąlyga: naudotas, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed (per stroke): 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swiveling: ±8° Longitudinal table travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Cross travel max.: 270 mm Max. workpiece weight (unsupported): 130 kg incl. clamping Godeuxfupepfx Acuskc Internal spindle mounting: 80 mm Tailstock quill mounting: MK3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern, and future-proof control system. Photo shows a delivered machine. - Very simple operation via touch panel. - Symbol layout on control panel almost identical to original control, so no retraining necessary. - Diagnostic function with display of PLC messages and digital I/Os - Dressing function can be modified or expanded as per customer request. - Oriented spindle stop for the workpiece spindle available on request. - New maximum infeed amount of 40 mm, further expansion possible on request. - Digital readout in 2 axes. X-axis resolution: 0.5 micron Options: - Encoder with digital display in the workpiece spindle headstock - Encoder with digital display in the grinding spindle headstock (height adjustment with spindle not possible) - New, robust internal grinding attachment, 80 mm or 100 mm diameter - Increased centre height up to max. 225 mm - Grinding spindle speed control Included: - Operating tools - Clamping tube for chuck Further accessories on request. The machine features an electronically controlled infeed system in the X-axis with stepper motor drive. Hydraulic table longitudinal and rapid traverse movement. Versatile use in production for external and internal cylindrical grinding, or for external, face, and internal grinding in a single clamping for individual parts. Possible options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measuring control The machine tool currently does not comply with the basic safety and protection requirements as stated in BetrSichV 2015. A risk assessment according to BetrSichV must be carried out to determine the required minimum safety objectives.

Sąlyga: naudotas, Gamybos metai: 1986, Grinding diameter: 350 mm Grinding length: 600 mm Centre height: 175 mm Very well-maintained machine. The machine comes from a precision grinding workshop in the Black Forest. Still under power at the previous owner’s site and can be inspected for a short time. In 2022, the machine underwent a partial overhaul and servicing at our facility, including restoration of the geometry to manufacturer's specifications. Equipment: - 2-axis FAGOR digital readout Gjdpfx Asv Tqqnjcuokc - Sine bar - Tailstock with fine adjustment - Hydraulic tailstock - Face grinding attachment - Internal grinding attachment - Fischer UJ70 internal grinding spindle - Paper band filter - Automatic cycle: roughing - finishing - spark-out - retraction