Bds Mab 485 pirkti naudotą (681)

Būklė: naudotas, Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 001, pjovimo ilgis (maks.): 5 000 mm, Offered is an automatic side board processing line with singulation, trimmer for cross-cutting, two stacker machines, additional discharge, and removal of stacking laths: Boards: 2000–5000 mm long, 16–40 mm thick, 70–200 mm wide, cycle rate 29 or 58 pieces per minute, single-operator seated joystick control: - Board transversal discharge with 4-strand roof chain transversal conveyor - Singulation inclined conveyor, 6000 mm wide, 3000 mm angled - Alignment roller conveyor - Chain transversal conveyor as a layer former - Star turner and grader prior to the trimmer - Wane detection (ALFHA-Edger) - Trimmer with 11 saws on a 50.5 cm pitch: the operator (seated at the joystick) decides: - Without recut: 5000 mm to Stacker 1, or alternatively 4000 mm to Stacker 1 - With recut: 4000 mm to Stacker 2, or 3000 mm to Stacker 2 - With recut: short lengths for ejection into box - With recut: 2 or 3 x 101 cm for stacking laths - Or destruction cut – cut length 505 mm for underlying vibratory chute - 2 stacker machines: 1× 2500–5000 mm, and 1× 2000–4000 mm - Automatic lowering of finished packages and onward transport to automatic strapping - FROMM strapping with 16 mm PET band and automatic transfer to take-off roller conveyor - ALFHA control with Siemens S7 – ensures perfect process flow. Performance logging / daily reports - Control cabinets with Siemens components, SEW motors, Telco photoelectric sensors For example, one operator processed, stacked, and strapped approx. 15,000 side boards 4000/17 × 76 mm in 9 hours. Dkedpfxoy Uzhfj Amysp The line is still assembled, but the upstream chipper has already been dismantled. Therefore, the system is immediately available. It is very robustly built and has always operated reliably and without problems.

Būklė: naujas, 1 brand new semi-automatic high-performance horizontal bandsaw with double-column guide and 2° cutting inclination to the table support surface Make: HUVEMA - BEKA MAK Model: BMSY 560 C Technical Data: Cutting capacity 90° rectangular: 560 x 750 mm Cutting capacity 90° round: 560 mm Cutting capacity 90° square: 560 mm Cutting capacity 45° rectangular: 410 x 560 mm Cutting capacity 45° round: 560 mm Cutting capacity 45° square: 560 mm Blade dimensions: 6000 x 41 x 1.3 mm Infinitely variable blade speed: 20-100 m/min Motor power: 4 kW Machine dimensions (L x W x H): 3400 x 1000 x 2050 mm Machine weight: 2045 kg Equipment / Special Features: • Semi-automatic double-column bandsaw • Linear guides • 2° cutting angle to the table support surface • Infinitely variable cutting speed via potentiometer on the control panel • Hydraulic vice • Hydraulic-mechanical saw blade tensioning • Powerful drive motor • Sensitive cutting pressure regulation • Thermal overload protection • Optical height adjustment • Heavy-duty gearbox • Coolant device • Infeed roller conveyor, 1200 mm • Chip brush • 1 pc. bi-metal bandsaw blade • Control panel Dsdpfxsbw H T Ds Amyskp • CE compliant Delivery time: approx. 8 weeks after receipt of order Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Būklė: naudotas, Gamybos metai: 2016, bendras aukštis: 1 600 mm, bendras ilgis: 14 100 mm, bendras plotis: 1 600 mm, Spalva: Pilka Svoris: 2 500 kg - Pagaminimo metai: 2016 - Dokumentacija prieinama: Taip - CE ženklinimas: Taip - CE sertifikatas: Ne - Serijos numeris: 6237 - Įtampa [V]: 415 - Srovės suvartojimas [A]: 20 - Transportavimo matmenys: 14 100 mm x 1 600 mm x 1 600 mm (ilgis x plotis x aukštis) - Transportavimo svoris [kg]: 2 500 kg - Transporto pakuotės [vnt.]: 4 Finansinė informacija PVM: Nurodyta kaina nurodyta be PVM PVM/diferencijuotas apmokestinimas: PVM atskaitomas įmonėms Pristatymas ir priėmimas mainais galimi bet kokiai pramoninei įrangai bet kuriuo metu. Dedjwnh N Njpfx Amyskp Yorick Diebels

Būklė: naudotas, Gamybos metai: 2005, bendras aukštis: 1 750 mm, bendras ilgis: 1 350 mm, bendras plotis: 1 350 mm, Spalva: Pilka Optimizuotas skersinio pjovimo staklės Stromab TR 500 Matrix 4 4000 Dsdjwq U Dxopfx Amyokp Pagaminimo metai: 2005 Variklio galia: 10 AG Automatinė stūmimo sistema Rašalinis spausdintuvas - Pagaminimo metai: 2005 - Dokumentacija prieinama: Ne - CE sertifikatas: Ne - Serijinis numeris: 250143 - Pagrindinio variklio galia [kW]: 7,5 - Maks. pjūklo plotis [mm]: 375 - Veleno pjūklo disko skersmuo [mm]: 30 - Paduodamojo stalo ilgis [mm]: 4300 - Išleidimo stalo ilgis [mm]: 2000 - Transportavimo matmenys: 1350mm x 1350mm x 1750mm (ilgis x plotis x aukštis) - Transportavimo pakuočių skaičius: 3 Finansinė informacija PVM: Nurodyta kaina be PVM PVM / skirtumo apmokestinimo sistema: PVM atskaitomas verslui Pristatymas ir keitimas įmanomi bet kada visiems pramonės sektoriaus įrenginiams Yorick Diebels

Būklė: naudotas, Gamybos metai: 2013, Spalva: Pilka Svoris: 2.000 kg Kaina: Pagal užklausą - Ypatingos savybės: - Aprašymas: Įranga šiuo metu neveikia, galimai programinės įrangos gedimas - Pagaminimo metai: 2013 - Dokumentacija prieinama: Ne - CE ženklinimas: Taip - CE sertifikatas: Ne - Serijos numeris: 4919 - Min. pjūklo disko skersmuo [mm]: 440 - Maks. pjūklo disko skersmuo [mm]: 450 - Pateikimo stalo ilgis [mm]: 4700 - Išleidimo stalo ilgis [mm]: 2000 - Pasirinktys: Automatinė padavimo sistema - Padavimo greitis: Automatinis - Įtampa [V]: 400 - Srovės sunaudojimas [A]: 13 - Saugiklis [A]: 20 - Transportavimo svoris [kg]: 2000 kg - Transportavimo paketai [vnt.]: 3 Dksdpfxjyvf Epj Amyop Finansinė informacija PVM: Nurodyta kaina be PVM PVM / Skirtumo apmokestinimas: PVM atskaitomas verslui Pristatymas ir pritaikymas galimi bet kada visiems pramonės įrenginiams Yorick Diebels

Gamybos metai: 2008, būklė: labai geros būklės (naudotas),

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2020, veikimo valandos: 1 234 h, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 7 000 mm, padavimo eiga Y ašimi: 600 mm, padavimo ilgis Z ašis: 250 mm, X ašies padavimo greitis: 80 m/min, bendras ilgis: 8 000 mm, bendras aukštis: 1 800 mm, bendras svoris: 2 000 kg, pjūklo disko skersmuo: 500 mm, disko skersmuo: 500 mm, stalo ilgis: 7 000 mm, Įranga: USB jungtis, Parduodama optimizavimo pjovimo staklė STROMAB MATRIX TR 500 labai geros techninės būklės, naudota nedideliame gamybos ceche, daugiausiai statybinei medienai pjauti. Naudota karkasinių namų surinkimui. Staklės visiškai tvarkingos, prižiūrėtos. Paruoštos darbui be papildomų investicijų. Parduodama su PVM sąskaita faktūra. Dkjdpfjwp Rvhjx Amyep VIETOJE GALIMA IŠBANDYTI KAINA derinama.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 0 kg Total power requirement 0 kW Automatic Angle Cross-cut Saw CT-600-6000 - Hydraulic under-table circular saw unit - Drive motor power 7.5 kW - Saw blade diameter Z=48x5 600 mm - Saw blade bore diameter 30 mm - Inclined work table Yes - Automatic table rotation -70° 0° +70° - Rotation speed from/to 0°/70° 3s - Positioning accuracy +/- 0.2° - Pneumatic workpiece hold-down clamps 2 pcs - Pneumatic side aligners 2 pcs - Safety cover over crosscut unit Yes - Cutting capacity at 0°: 160 x 310 mm, 80 x 390 mm - Cutting capacity at 45°: 160 x 220 mm, 80 x 270 mm - Cutting capacity at 70°: 160 x 90 mm, 80 x 130 mm - Minimum workpiece thickness 10 mm Connection data - Supply voltage 400 V / 50 Hz - Control voltage 24 V - Compressed air consumption at 8 bar per cycle approx. 8 Nl - Extraction spigots Ø100 mm 2 pcs - Extraction spigot Ø160 mm 1 pc - Air velocity at extraction spigot center approx. 25-35 m/s Electronically controlled pusher: - Infeed length: 6000 mm - Driven by brushless servo motor - Feed system with precision rack and pinion and measurement via servo motors Dksdjvz Eq Sjpfx Amyop - Pneumatically liftable push point for passing over the workpiece in the subsequent cycle - Positioning tolerance +/- 0.4 mm Control: - Beckhoff industrial PC control with Windows CE operating system with touch screen - Data entry via keyboard, USB, or network - 5 optimization criteria: a) Maximum length, b) Minimal waste c) Part priority d) Volume e) Value - Processing individual part lists or combining orders - Graphical display of parts in process - Batch processing capability - 70 cutting lists with 21 dimensions each or one cutting list with 400 dimensions - Safety device - CE compliant - Complete safety enclosure included

Būklė: naujas, Gamybos metai: 2025, Dimensions (LxWxH): 0x0x0 mm Weight: 290 kg Total power requirement: 4 kW Pendulum Saw PS-45-F - Cutting height: 130 mm Dksdpfjvz H Acsx Amyep - Cutting length: 510 mm - Motor: 4.0 kW - Voltage: 400 V / 50 Hz - Speed: 2800 rpm - Saw blade diameter: 450 mm, bore 30 mm - Manual feed - Extraction port diameter: 150 mm - Including 1 m infeed roller conveyor with right-hand stop rail - Including 1 m outfeed roller conveyor with left-hand stop rail - CE conformity - Weight: 290 kg

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 4500x1200x1200 mm Weight: 1500 kg Total Power Requirement: 8 kW Optimizing Cross-Cut Saw WS1 - Cutting Height Pos. A: 130x175, 120x200, 100x230, 85x250, 50x280, 15x305 mm Pos. B: 100x290, 80x315, 50x340, 30x355, 15x365 mm Dksdovz Hz Ejpfx Amyop - Cutting speed up to 100 cycles/min. - Feed speed: 120 m/min - Motor power: 7.5 kW - Voltage: 400 V / 50 Hz - Saw blade diameter: 500 mm, bore 30 mm - Speed: 3600 rpm - Min. workpiece length: 550 mm - Min. workpiece width: 40 mm - Min. workpiece height: 15 mm - Cutting accuracy: +/- 0.8 mm - Infeed roller conveyor right, 2000 mm with double marking station - Discharge table left, 1000 mm - Extraction port diameter: 200 mm - Air consumption: 20 NL/cycle - Operating pressure: 6 bar - Working height: 930 mm - PLC control with 7” color touch screen for simple operation + fixed length cross-cut mode + sequential cross-cut mode (10 different dimensions storable) + cross-cutting of marked chalk lines + fixed length and marked chalk line cross-cutting - CE conformity - Dimensions (L=4500, W=1200, H=1200 mm) - Weight: 1500 kg

Būklė: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 0 x 0 x 0 mm Weight: 300 kg Total power requirement: 5.5 kW Pendulum Saw PENDELSÄGE PS-50-F - Cutting height: 145 mm - Cutting length: 510 mm - Motor: 5.5 kW - Voltage: 400 V / 50 Hz - Speed: 2800 rpm - Saw blade diameter: 500 mm, bore 30 mm - Manual feed - Extraction nozzle diameter: 150 mm Dsdpfxovz H Ais Amyokp - Including 1 m infeed roller conveyor with right-hand stop rail - Including 1 m outfeed roller conveyor with left-hand stop rail - CE conformity - Weight: 300 kg

Būklė: naujas, Gamybos metai: 2025, Dimensions (LxWxH): 0x0x0 mm Weight: 900 kg Total power requirement: 5 kW Automatic optimizing cross-cut saw with full optimization TR-450 MATRIX-6000 - Drive motor power: 4.0 kW - Saw blade diameter: 450 x 30 mm Z=72 - Cutting capacity according to cutting diagram - Cutting capacity: 95 x 265 mm - Cutting capacity: 85 x 277 mm - Cutting capacity: 60 x 290 mm - Cutting capacity: 40 x 310 mm - Cutting capacity: 25 x 330 mm - Cutting cycle time: 4 seconds - Pneumatic cross-cutting unit Dksdpfxjv A Hr Ts Amysp - Worktable inclined by 8° - Minimum workpiece thickness: 10 mm - Safety cover over cross-cutting unit - CE standard - Weight: 900 kg Connection data: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction ports: 2 x 100 mm diameter - Extraction performance: 2400 m³/h - Air consumption per cycle: 6 Nl - Air speed at center of extraction port: approx. 25-35 m/s Electronically controlled pusher: - Feed length: 6000 mm - Pusher speed: 90 m/min - Drive via brushless servo motor - Feed system with precision rack-and-pinion and measurement via servo motor - Pneumatic lift of the pusher at cycle end and overhead return - Photoelectric sensor for workpiece length measurement - Photoelectric sensor for defect detection - Marking with fluorescent chalk - Worktable inclination 8° - Positioning tolerance +/- 0.4 mm Control: - High-resolution 12'' touchscreen monitor (800 x 600 pixels) - Creation of cutting lists directly on the machine control - Up to 1000 cutting lists with 10 sizes each - Single list with 10,000 sequential sizes - 3 optimization options: maximum length, sequence, and workpiece sequence - 3 optimization options: volume, minimum waste, and priority - Standard USB and Ethernet interface - Including OPTI function for automatic measurement of the workpiece to be cut. Optimal for processing material with variable lengths, with single or batch feeding. 6 optimization options (maximum length, sequence, workpiece sequence, volume, minimum waste, and priority) - Including OPTI PLUS function for reading chalk markings, enabling full optimization and removal of knots and defects. - Marking with chalk Options: - Pneumatic side clamp €850.00 - Creation of cutting lists on PC €360.00 - Outfeed table €360.00/m

Būklė: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 0 x 0 x 0 mm Weight: 1500 kg Total power requirement: 10.2 kW Fully optimizing automatic cross-cut saw TR-600 MATRIX-6000 - Motor drive power: 9.2 kW - Saw blade diameter: 600 x 30 mm, Z=60 - Cutting capacity according to cutting diagram - Cutting capacity: 150 x 365 mm - Cutting capacity: 130 x 440 mm - Cutting capacity: 100 x 530 mm - Cutting capacity: 60 x 580 mm - Cutting capacity: 30 x 610 mm - Cutting cycle: 6 seconds - Hydraulic cross-cutting unit - Worktable inclined by 8° - Minimum workpiece thickness: 10 mm - Safety cover over cross-cutting unit - CE standard - Weight: 1500 kg Dkjdpsv A Htksfx Amyop Electrical connection data: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction ports: 4 x 100 mm diameter - Extraction capacity: 2400 m³/h - Air velocity at the center of the extraction port: approx. 25–35 m/s Electronically controlled pusher: - Feed length: 6000 mm - Max. pusher speed: 90 m/min - Driven by brushless servo motor - Feed system with precision rack and pinion and feedback via servo motor - Pneumatic lifting of the pusher at cycle end and upper return - Photocell for workpiece length measurement - Photocell for defect detection - Marking with fluorescent chalk - Working surface inclination 8° - Positioning tolerance: +/- 0.4 mm Control system: - High-resolution 12" touchscreen monitor (800 x 600 pixels) - Creation of cut lists directly at the machine control - Up to 1000 cut lists with 10 dimensions each - One list with up to 10,000 dimensions in sequence - 3 optimization options (maximum length, sequence, and workpiece sequence) - 3 optimization options (volume, minimal waste, and priority) - Standard USB and Ethernet port - Includes OPTI function for automatic measurement of the workpiece to be cut. Optimal for processing material of variable lengths, with single or bundle infeed - 6 optimization options (maximum length, sequence, workpiece sequence, volume, minimal waste, and priority) - Includes OPTI PLUS function for reading markings to ensure full optimization and removal of knots and defects. - Marking with chalk Options: - Pneumatic side clamp €850.00 - Creation of cut lists at PC €360.00 - Outfeed table €360.00/m

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 0x0x0 mm Weight: 1000 kg Total power requirement: 8.5 kW Fully optimized automatic cross-cut saw TR-500 MATRIX-6000 - Motor drive power: 7.5 kW - Saw blade diameter: 500 x 30 mm Z=144 - Cutting capacity according to cutting diagram - Cutting capacity 135 x 280 mm - Cutting capacity 125 x 295 mm - Cutting capacity 95 x 325 mm - Cutting capacity 80 x 340 mm - Cutting capacity 55 x 360 mm - Cutting cycle: 4 seconds - Pneumatic cross-cutting unit - 8° inclined worktable - Minimum workpiece thickness: 10 mm - Safety cover over cross-cutting unit - CE standard - Weight: 1000 kg Connection data: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction ports: 4 x diameter 100 mm - Extraction capacity: 2400 m³/h - Air consumption per cycle: 4 Nl - Air velocity at center of extraction port: approx. 25–35 m/s Electronically controlled pusher: - Feed length: 6000 mm - Pusher speed: 90 m/min. - Drive by brushless servomotor - Feed system with precision rack and pinion, measurement by servomotor - Pneumatic pusher lift at end of cycle and upper return - Photoelectric sensor for workpiece length measurement - Photoelectric sensor for defect detection - Marking with fluorescent chalk - 8° inclined working surface - Positioning tolerance: +/- 0.4 mm Control system: - High-resolution 12" touchscreen monitor (800 x 600 pixels) - Cutting list creation directly via machine control - Up to 1000 cutting lists with 10 sizes each - Single list with 10,000 dimensions in sequence - 3 optimization options (maximum length, sequence, workpiece sequence) - 3 optimization options (volume, minimal waste, priority) - Standard USB and Ethernet ports - Including OPTI function for automatic measuring of the workpiece to be cut. Optimal solution for processing material with variable lengths, for single or bundle feeding - 6 optimization options (maximum length, sequence, workpiece sequence, volume, minimal waste, priority) - Including OPTI PLUS function for mark detection, enabling full optimization and removal of knots and defects - Marking with chalk Option: - Pneumatic side clamp €850.00 Dsdpfjv A Htdox Amyekp - Cutting list creation via PC €360.00 - Outfeed table €360.00/m

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Mabi 4QS + 4H Quadro briaunavimo mašina ir tvirtinimo įrenginys Mabi 3000E segmentų žirklės Mabi apvalkalo lenkimo staklės Mabi skylamušė Mabi 40 dangtelių kirpimo staklės + Mabi 4K dangtelių skylamušė Djdpfx Amoyz Ad Ujyekp

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, A used four-column punching press MABU with MPC200 control in very good technical condition. Press force, 30° before BDC: 250 kN Stroke rate, steplessly adjustable: 80–400 strokes/min Dsdouh U Etepfx Amyskp Stroke adjustment: 7–62 mm Tool holder: Diameter 40H7 x 90 mm Clearance between uprights (front/side): 404/334 mm For further technical data, see PDF document. Technical data and dimensions: subject to change/errors excepted.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 241306, pjūklo disko skersmuo: 500 mm, pjovimo aukštis (maks.): 170 mm, pjovimo plotis (maks.): 395 mm, galia: 7,5 kW (10,20 AG), gręžinio skersmuo: 30 mm, TECHNINĖ INFORMACIJA Didžiausias pjovimo plotis: 395 mm Didžiausias pjovimo aukštis: 170 mm Mažiausias pjūklo disko skersmuo: 490 mm Didžiausias pjūklo disko skersmuo: 500 mm Pjūklo disko tvirtinimo skylės skersmuo: 30 mm Įvedimo stalo ilgis: 5.640 mm Išvedimo stalo ilgis: 1.180 mm Pateikimo greitis: automatinis ĮRANGOS DUOMENYS Įtampa: 400 V Srovės vartojimas: 16,5 A Saugiklis: 32 A Galia: 7,5 kW Transporto svoris: 800 kg Transportavimo pakuotės: 3 Dkjdpoy Akvnjfx Amyjp KOMPLEKTACIJA Automatinė medžiagos padavimo sistema

Būklė: labai geros būklės (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, pjūklo disko skersmuo: 600 mm, pjovimo aukštis (maks.): 160 mm, maksimalus pjovimo aukštis 160 mm maksimalus pjovimo plotis 610 mm Dkedpfoymnvlex Amyep diskinio pjūklo skersmuo 600 mm minimalus diskinio pjūklo skersmuo 590 mm diskinio pjūklo apsukos 2800 aps./min variklio galia 7,5 kW 2 atmušos gamybos metai 2001 svoris apie 700 kg

Būklė: naudotas, Water or other liquids PET bottle filling line – capacity approx. 6000 bph 2.0 L Currently, the machines are set up for 2.0 L PET bottle format (no other formats included in the set). It is possible to adjust the format for smaller or larger PET bottles with the preparation of appropriate tooling. The line includes: - Nagema BF-60 filler with 12-head bottle capper - Plate conveyors for PET bottles - Nagema KOMI 160 type carbonator Dkedpfx Aowny Hgsmysp - Spomasz wrap-around paper labeler - Bottle packer with control cabinet for producing shrink-packs (e.g., 2x3) - Electric shrinking oven + cooling fan for multipacks - Pallet wrapper The last photo shows the layout and dimensions of the machines. Technical condition: The machines were in working order until production ended in 2018. A full inspection and maintenance are recommended before resuming production. Optionally, a SIDEL SBO4 blow molder, which operated with this line, can be purchased additionally.

Būklė: naudotas, Technical data: Max saw blade diameter: 600 mm Min saw blade diameter: 590 mm Saw spindle diameter: 30 mm Pneumatic saw feed Dkederi Si Dspfx Amysp Max cutting height: 210 mm Max saw blade extension width: 500 mm 2 pneumatic clamps Extraction port diameter: 155 mm Worktable dimensions: 790 x 910 mm Power supply: 400 V Motor power: 11 kW Overall dimensions: Length: 1550 mm Width: 1550 mm Height: 2000 mm

Būklė: naujas, Gamybos metai: 2025, mašinos/transporto priemonės numeris: MR006589, Aukštos kokybės greita skersavimo pjovimo staklė su automatine stūmimo sistema ir optimizavimo programine įranga. Šis įrenginys turi funkciją, leidžiančią kreida pažymėti medžiagos defektus. Komplektuota su šiomis opcijomis: - Pneumatinis pastūmimo cilindras dešinėje pjūklo pusėje - Pneumatinis pastūmimo cilindras kairėje pjūklo pusėje - Paketas 'OPTI' su medžiagos ilgio atpažinimu ir papildomais optimizavimo kriterijais - Paketas 'OPTI PLUS' su medžiagos defektų atpažinimu per fotoląstelę - Mašina su išvedimo stalu (po metrą) - Etikečių spausdintuvas – MO9416XLTD Dksdsy I N Akopfx Amysp Techninės specifikacijos: - Kampas: 90° - Didžiausias pjovimo ilgis: 360 mm - Didžiausias pjovimo aukštis: 135 mm - Didžiausias stūmimo ilgis: 6000 mm - Pjovimo sąrašo importas: Taip - Kreidos brūkšnio jutiklis: Taip - Didžiausias pjūklo diskas: 500 mm - Variklio galia: 10 AG - Serijos numeris: 10561

Būklė: naudotas, STROMAB TR 500 – Under-Table Crosscut Saw with Pneumatic Feed For sale is a STROMAB TR 500 under-table crosscut saw featuring a pneumatic saw blade feed and a blade diameter of 500 mm. This machine is ideal for precise and efficient cross-cutting of workpieces in workshop environments. Year of manufacture: 2009 Machine number: 3229 — Technical Data • Maximum cutting width: 360 mm • Cutting height: 135 mm • Saw blade diameter: 500 mm • Infeed roller conveyor length: 1,000 mm • Outfeed roller conveyor length: 1,000 mm • Table height: 850 mm • Main motor: 7.5 kW • Saw blade feed: pneumatic • Compliance marking: CE mark • Weight: approx. 420 kg — Condition & Delivery The machine is in technically perfect condition and ready for immediate use. • Inspection possible at any time • Shipping securely packed on pallet by freight forwarder available at short notice — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices are net plus 19% VAT. Subject to change and errors excepted. Dkedpfx Ajxiza Uemyep

Būklė: naudotas, Gamybos metai: 2016, pjūklas su grandinės krovikliu, stūmikliu, išvestis su išmetimo įrenginiais Dksdpfxozb Rhme Amyep didelio greičio pjūklas

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2011,

Būklė: naujas, 1 Brand New Semi-Automatic High-Performance Horizontal Bandsaw with Double Column Guide and 2° Cutting Angle to the Table Surface Manufacturer: HUVEMA / BEKA-MAK, Origin: Turkey Model: BMSY 330 C Technical Data: Saw Capacity 90° round: 330 mm Saw Capacity 90° rectangular: 360 x 330 mm Saw Capacity 90° square: 330 mm Saw Capacity 45° round: approx. 250 mm Saw Capacity 45° rectangular: approx. 250 x 325 mm Saw Capacity 45° square: approx. 250 mm Saw Blade Size: 5000 x 34 x 1.1 mm Infinitely Variable Blade Speed: 20 - 100 rpm Working Height: 635 mm Motor Power: 3 kW Hydraulic Motor: 0.55 kW Dimensions (L x W x H): 2830 x 920 x 1630 mm Machine Weight: 1,030 kg Equipment / Special Features: • Semi-automatic double column bandsaw Djdsfk Eu Njpfx Amyjkp • Linear guides • 2° cutting angle to the table surface • Infinitely variable cutting speed via potentiometer on the control panel • Hydraulic vice • Hydraulic-mechanical blade tensioning • Powerful drive motor • Sensitive cutting pressure regulation • Thermal overload protection • Optical height adjustment • Heavy-duty gearbox • Coolant system • Feed roller table 1200 mm • Chip brush • 1 pc. bi-metal saw blade • Control panel • CE compliant Delivery time: approx. 8 weeks from order receipt Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany