Automatinės Šėryklos pirkti naudotą (797)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2001, veleno skylė: 20 mm, Maszyna w idealnym stanie. Możliwość oględzin w trakcie pracy produkcyjnej w dowolnym momencie. Dsdpfxju Ivw Tj Ab Sokg

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2004, veikimo valandos: 10 700 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 04 357, padavimo ilgis Z ašis: 310 mm, veleno greitis (maks.): 6 000 aps./min, ašies variklio galia: 5 500 W, bendras svoris: 3 800 kg, galia: 16 kW (21,75 AG), Strypo skersmuo (maks.): 32 mm, bendras ilgis: 2 640 mm, bendras aukštis: 1 900 mm, bendras plotis: 1 600 mm, ašies skaičius: 2, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, Šio šveicariško tipo tekinimo staklės yra visiškai veikiantis. Jis turi 9 ašis ir komplektuojamas su IEMCA Boss 332R-E strypų tiekimo įrenginiu, kuris įtrauktas į kainą. Parduotame, nes daugiau neturime darbo šiai staklei. Dkjdpfx Asxrckyob Sjg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1984, Funkcionalumas: visiškai funkcionalus, Equipment: - 1 right-hand feed carriage - 1 two-point eccentric press, 250 kN - 4 standard slide units - 2 narrow slide units Dksdpfxsrwnyvo Ab Ssg - 1 control shaft Working range: - Wire thickness range: 0.5 - 5.0 mm - Strip width: max. 40 mm - Feed length: max. 320 mm - Performance: up to 135 cycles/min

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, Swing diameter over bed: 32 mm Spindle bore: 32 mm Turning length: 125 mm Dkodpfxsxq Hk Uj Ab Sjg Control: YASKAWA SIEMENS 840 DI V2 Spindle speed: 7,000 rpm Workpiece length - max.: 150 mm Clamping diameter: 32 mm Feed rate: 0 - 2000 mm/min Machine weight: approx. 5.7 t Space requirements: approx. 10.5 x 2 x 1.9 m The Swiss-type lathe is in good condition, ready for immediate use, and is supplied with tool holders and spare parts. >> Two identical STAR 32T Swiss-type lathes are available.

Sąlyga: geras (naudotas), BIHLER GRM100 Stamping and Forming Machine, Manufactured in Germany. Machine originally overhauled by Bihler in 2010, upgraded with servomotor, pump, rewiring, new control system, etc. Equipped with 4 forming slides and an 18-ton press station. Gripper feed on the right with straightening unit. Maximum strip width: 100 mm. Maximum wire diameter: 10 mm. Standard feed length: up to 250 mm. Maximum operating speed: approx. 135 strokes per minute. Servomotor. Touchscreen control panel. Dkodepm H Haopfx Ab Ssg Pneumatic clutch. Weight: approx. 6,000 kg. Power supply: 400/480 V, 50 Hz. We also have further high-speed presses by Bruderer, Schaal and Mabu in stock. Also available: ideal butt welding machines.

Sąlyga: geras (naudotas), Gamybos metai: 1994, Funkcionalumas: visiškai funkcionalus,

Sąlyga: naudotas, Gamybos metai: 2006, Strypo skersmuo: 20 mm Veleno pratekėjimas: 22 mm Tekinimo ilgis: 205 mm Dkodpfx Abexukr De Seg Valdymas: Siemens Yaskawa Sūkių skaičius: 500-10 000 aps./min c ašis: 0,001° Perėmimo stotis: 20 mm Tekinimo ilgis (perėmimas): 30 mm Indeksavimas kas 0,001° Įrankių skaičius: 10 fiksuotų Bendras elektros poreikis: 2,2/3,7 kW Mašinos svoris apie 3,5 t Užimamas plotas apie 2,6 x 1,2 x 1,8 +FMB m CNC ilgasis tekinimo staklės Star Ecas 20, pagaminta 2006 m., su FMB minmag 18 padavimo laikikliu Gera būklė, iš medicinos pramonės. Galimos 2 identiškos mašinos, pagaminimo metai vienodi.

Sąlyga: naujas, MACC 320 MS Semi-Automatic Bandsaw Condition: New "CE" Technical data sheet attached. Available for immediate delivery while stock lasts The core features of the machine (blade support rigidity, flywheel sizing, band guiding and tensioning system) have been meticulously engineered to prevent band fatigue, extend service life, and improve cutting accuracy and speed. Vertical rotation on an adjustable, backlash-free tapered roller bearing pivot. Band drive via two-speed motor and special gearbox with bronze gear and hardened, ground worm screw. Flywheels optimally dimensioned. Robust band guides featuring sealed roller bearings and adjustable carbide guide plates. Band tensioning achieved by an electromechanical device equipped with blade rotation micro switch control. Safety device against accidents fitted on the flywheel cover, control handle, and blade. Cutting thickness: 1.2 mm Cutting range: 0° to 60° right Adjustable stop for repetitive cuts of the same length. 0.06 kW electric pump for band cooling Operation: Start the cutting cycle by pressing the start button, the machine: 1. Closes the vice and activates the band motor 2. Lowers the arm for cutting 3. Returns the arm to the starting position 4. Stops the band motor 5. Opens the vice Dedpfxsfibfas Ab Sskg Manual cutting option available OPTIONAL ACCESSORIES: - SINGLE-PHASE motor 69 m/min - Speed variator from 20 to 90 m/min

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1983, Equipment: 1 gripper feed, right 1 two-point eccentric press, 250 kN 5 slide units Working range: Wire diameter range: 1.5 – 5.0 mm Strip width: max. 50 mm Djdpfx Abovuzvdj Sokg Feed length: max. 200 mm Capacity: max. 450 cycles/min

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Turning diameter over bed: 32 mm Spindle bore: 32 mm Turning length: 125 mm Control: YASKAWA SIEMENS 840 DI V2 Clamping diameter: 32 mm Spindle speed: 7,000 rpm Maximum workpiece length: 150 mm Dedpfx Absvwgmye Sjkg Feed rate: 0 - 2,000 mm/min Machine weight: approx. 5.7 t Space requirements: approx. 10.5 x 2 x 1.9 m The sliding headstock automatic lathe is in good condition, immediately ready for operation, and comes with tool holders and spare parts. >> Two identical STAR 32T sliding headstock automatic lathes are available.

Sąlyga: naudotas, Gamybos metai: 2019, veikimo valandos: 413 h, Funkcionalumas: visiškai funkcionalus, kuro tipas: elektrinis, pavaros tipas: Elektro, Drėgno valymo automatai Būklė: Paruošta naudojimui ir visiškai veikianti Dkjdpfx Aexz Iqwjb Sjg Techninė būklė: gera Baterijos įtampa: 24V

Sąlyga: naujas, Working width (finished dimension) 23 – 180 mm Working height (finished dimension) 6 – 105 mm Min. length of individual workpiece 300 mm Feed speed 6 – 12 m/min Motor power horizontal spindles 2 x 7.5 kW Motor power vertical spindle 1 x 7.5 kW Spindle speed 6000 rpm Spindle diameter 35 mm Clamping length vertical spindles 120 mm Clamping length horizontal spindles 190 mm Manual lubricant pump Profile capacity without axial adjustment on vertical spindle 10 mm Loose roller integrated in outfeed table Extraction diameter 4 x 120 mm Including OPTIONS - Motor-driven feed roller before the jointer with lever for quick adjustment - Front vertical pressure unit before the left vertical spindle - Infeed table length 2300 mm - Tool package consisting of 4 planing heads and one edge-jointing cutter Dkjdeiiv Dcjpfx Ab Sjg

Sąlyga: naudotas, Gamybos metai: 2000, Funkcionalumas: ribota funkcionalumas, Gamintojas: STAR Tipas: SR-20 Metai: 2000 su: FANUC 18i-TB valdymu, varomi įrankiai (pagrindinė pusė), sinchroninis velenas, nugarinės pusės apdirbimas (variklis sugedęs), Dkedpfexl Ridox Ab Sog C ašis, drožlių transporteris, aliejaus rūko ištraukėjas, gesinimo sistema, strypų padavimo žurnalas FMB

Sąlyga: naujas, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Premium Service ⚡️ Fast Delivery ⚡️ Outstanding Support! ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 4–6 weeks after receipt of payment! Important notice: If you would like a quote for an automatic powder coating system, please use the powder coating system configurator on the homepage of our website. ✅✅✅Energy class A+++✅✅✅ ➖➖➖➖➖ ✳️Maintain your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty, or leasing programs. ➖➖➖➖➖ ✨✨Buy direct from the manufacturer and benefit from our price and quality advantage!✨✨ Benefit from Proton’s 40 years of experience in surface coating technologies. Djdpfokwct Uox Ab Sokg ➖➖➖➖➖ ☘️Eco-friendly☘️⚡️Green Energy⚡️☘️ ► Optimal adhesion starts with perfect preparation – Chemical pretreatment systems by PROTON◄ Before the coating can take its full effect, the surface must be flawless. PROTON’s surface pretreatment systems ensure that every contamination—be it oil, dirt, or oxidation—is reliably removed. This is the only way to achieve long-lasting corrosion resistance and excellent coating adhesion. Every product requires a process tailored to its needs. Whether alkaline or acidic degreasing, iron or zinc phosphating, nanotechnology, or chrome-free processes—we develop customized solutions to meet your requirements. Our pretreatment systems—be it spray or immersion type—offer you: ✳️ Maximum energy efficiency ✳️ Minimized chemical and water consumption ✳️ Precise process control with automatic dosing and pH monitoring ✳️ Durable construction made from chemical-resistant stainless steel or plastic Our promise: Tailor-made technology for the highest standards. Our experienced project team analyzes your production conditions in detail and recommends the optimal pretreatment system tailored to your needs. We take all crucial parameters into account—from heating capacity to water circulation, steam separation, and chemical separation. The spray washing lines are seamlessly integrated into your conveyor technology. All cleaning, rinsing, and drying processes are fully automated and efficient—ready for perfect coating. Available systems: ✳️ Spray and immersion pretreatment lines ✳️ Nanotechnology systems (e.g. Bonderite, Oxsilan) ✳️ Degreasing and pickling systems ✳️ Iron and zinc phosphating lines ✳️ Chromating and chrome-free systems PROTON – Technology that convinces. Experience that delivers results. ⭐Follow us for new campaigns⭐ ☀️ 2 YEARS WARRANTY ☀️ ☀️We hold CE certificates for all our machines and ATEX certificates for those machines where required.☀️

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1984, Funkcionalumas: visiškai funkcionalus, Equipment: - 1 right-hand feed carriage - 1 two-point eccentric press, 250 kN Dedotzlzaopfx Ab Sokg - 4 standard slide units - 2 narrow slide units - 1 control shaft Working range: - Wire thickness range: 0.5 - 5.0 mm - Strip width: max. 40 mm - Feed length: max. 320 mm - Performance: up to 135 cycles/min

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, TIK 8 300 valandų! Valdymas: TX 8 i-p PAGRINDINIS VERPTUVAS Didžiausias strypo pratekėjimas: 32 mm Didžiausias detalės ilgis: Dksdjxrf Etspfx Ab Sog - Ilgo tekinimo režimu: 245 mm - Trumpo tekinimo režimu: 125 mm Didžiausias verpstės greitis: 6 400 1/min C ašis PRIEŠPRIEŠINĖ VERPTUVAS Didžiausias strypo pratekėjimas: 32 mm Didžiausias detalės įtvirtinimo ilgis: 250 mm Didžiausias verpstės greitis: 6 000 1/min C ašis VIRŠUTINIS ĮRANKIŲ BŪGNAS Stočių skaičius: 10 Visos stotys – varomosios Didžiausias greitis: 12 000 1/min APATINIS ĮRANKIŲ BŪGNAS Stočių skaičius: 9 Visos stotys – varomosios Didžiausias greitis: 12 000 1/min GALINIS PADALINYS Stočių skaičius: 8 iš jų varomosios – 3 (T12, T13 ir T14) T12 & T14 greitis: 12 000 1/min T13 greitis: 4 000 1/min Detalių transporterio juosta Drožlių transporterio KSS siurblys – 20 bar IFS aliejaus rūko filtras Strypų padavėjas: FMB turbo 3-36

Sąlyga: naudotas, Techninės detalės: Veleno perėjimas: 60 mm Sukimosi ilgis: 45 mm Sukimosi skersmuo: maks. 56 mm Gręžimo gylis: maks. 70 mm Sukimosi greitis: 48 - 1500 (velenas) aps./min. Sriegiavimas: Sukimosi greitis: 24 - 750 aps./min. Įrankio revolveris - stočių skaičius: 8 Bendra galia: 5,5 kW Staklių svoris apie: 2,4 t Užimamas plotas apie: Išmatavimai: 2,1 x 1,0 x 1,8 m Dodpfx Aou Iwyiob Sjkg Kreive valdoma tekinimo automatika pagal šabloną. Ruonis apkabinamas per tvirtinimo patrontą. Revolverinė galvutė: Diskinis revolveris Hahn & Tessky Esslingen, įrankio eiga 80 mm, reguliavimas 36 mm, atstumas tarp tvirtinimo galvutės ir revolverio min./maks.: 72/188 mm 2 vnt. sukimo atramų, darbo eiga 45 mm 2 vnt. atpjovimo atramų, darbo eiga apie 40 mm Aušinimo skysčio sistema Staklės neprijungtos. Parduodama už siūlomą kainą.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2005, Multi-spindle moulder with 9 spindles and SCM Control 100 PC control for all spindles Max. working width: 240 mm Min. working width: 25 mm Dkjdpfxeg Umrmj Ab Ssg Max. working height: 120 mm Min. working height: 10 mm Minimum workpiece length: 640 mm Feed speed: 6 - 36 m/min, variable Spindle speed: 6000/8300 rpm Spindle diameter: 40 mm Usable length of vertical spindles: 140 mm Usable length of horizontal spindles: 250 mm Axial adjustment of vertical spindles relative to worktable: 0 - 80 mm Axial adjustment of horizontal spindles to the right guide: 0 - 45 mm Min. and max. diameter of profile tools: 100 - 220 mm Min. and max. diameter of tools on the planing spindle: 120 - 140 mm Profile capacity of the second lower horizontal spindle with tool Ø 200 mm = 15 mm Feed motor power: 5.5 kW Feed roller diameter: 140 mm Infeed table length: 2,500 mm Quick adjustment of infeed table and guide: 10 mm Extraction capacity: 7,500 m³/h Compressed air supply: 6 – 10 bar Weight: 6,000 kg Dimensions L x W x H = 6300 x 1620 x 1655 mm Spindle arrangement: Lower horizontal spindle: Motor power: 11.0 kW Spindle speed: 6,000 rpm Right vertical spindle: Motor power: 7.5 kW Spindle speed: 8,300 rpm Left vertical spindle: Motor power: 7.5 kW Spindle speed: 8,300 rpm 2nd right vertical spindle: Motor power: 7.5 kW Spindle speed: 8,300 rpm 2nd left vertical spindle: Motor power: 7.5 kW Spindle speed: 8,300 rpm Upper horizontal spindle: Motor power: 11.0 kW Spindle speed: 8,300 rpm 2nd lower horizontal spindle: Motor power: 12.0 kW Spindle speed: 8,300 rpm 2nd upper horizontal spindle: Motor power: 11.0 kW Spindle speed: 8,300 rpm 3rd lower horizontal spindle: Motor power: 7.5 kW Spindle speed: 8,300 rpm SET-UP quick adjustment system Worktables with fine adjustment of all units via Control 100 PC control Axial travel of vertical spindle 80 mm for large tool diameters Pneumatically operated full safety cabin Feed system with universal joint drive Infinitely variable feed speed Motorized height adjustment of feed system and spindles with independent control Segmented pressure shoes after the upper horizontal spindles Fine adjustment of outfeed table Pneumatic device for spindle locking in working position Automatically adjustable left vertical spindle Including ZIWO CL 15 automatic loader Note on used machinery: • Technical data and prior sale subject to change. • All prices quoted are ex-site – loaded free of charge! • The machines have been cleaned and functionally tested. • All machines are purchased as seen, without any warranty or guarantee. Buyers are welcome to inspect the machines at the site. • Special agreements are only valid in written form. (We will only respond to inquiries that include your address and telephone number!)

Sąlyga: geras (naudotas), Gamybos metai: 2004, CNC Swiss-type automatic lathe Manufacturer: CITIZEN Dkedpfjwnr Rwex Ab Seg Model: C16 VII Year of manufacture: 2004 Equipped with: Mitsubishi Meldas control unit Synchronous spindle Driven tools Back working unit High-pressure pump Oil mist extraction unit Fire extinguishing system Bar loading magazine IEMCA GENIUS 118

Sąlyga: geras (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 123, veleno greitis (min.): 200 aps./min, veleno greitis (maks.): 10 000 aps./min, bendras aukštis: 2 200 mm, bendras ilgis: 9 000 mm, bendras plotis: 1 500 mm, bendras svoris: 5 000 kg, valdiklių gamintojas: FANUC, valdiklio modelis: SERIES 32i-MODEL B, priešinio veleno greitis (min.): 200 aps./min, priešpriešinio veleno didžiausias greitis: 10 000 aps./min, TSUGAMI B0266E-II CNC Automatic Lathe - Operating voltage: 200 V - Frequency: 50 Hz - Rated current: 21.4 A - Max. bar capacity: 26 mm - Max. machining length: 320 mm (with synchronously driven guide bushing) - Without guide bushing: 50 mm - Max. drilling diameter: 12 mm - Max. thread tapping diameter: M10 - Diameter for deep hole drilling: 10 mm - Max. sub-spindle clamping diameter: 26 mm - Max. drilling diameter sub-spindle: 10 mm - Max. thread tapping diameter sub-spindle: M10 - Max. drilling diameter tool spindle: 8 mm (front/rear tool holder) - Max. thread tapping diameter tool spindle: M6 (front/rear tool holder) - Max. slot milling cutter diameter tool spindle: 45 mm - Rotating guide bushing: 200 - 10,000 rpm (synchronously driven) - Tool spindle speed: 200 - 6,000 rpm - Total number of tools (standard specification): 31 - Tool size: 16 mm square x 100 mm Dedpfx Abjx Hxz Hj Sekg - Rapid traverse: 32 m/min, rapid traverse in X1 and Y1: 24 m/min, in Y2: 24 m/min - Controllable axes: 6 The machine is equipped with a bar feeder from FMB, type: TURBO 3-36, as well as a chip conveyor. Note: The item must be collected between 04 and 12 March 2026 on a mutually agreed date. FCA D-75181 Pforzheim – loaded onto truck

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1988, Funkcionalumas: visiškai funkcionalus, Equipment: 1 right-hand gripper feed 1 eccentric press 70 kN 3 narrow slide units 1 control shaft Working range: Wire diameter range: 0.5 - 3.0 mm Strip width: max. 40 mm Dodpfx Abotmty No Sjkg Feed length: max. 240 mm Capacity: max. 400 cycles/min

Sąlyga: naudotas, Gamybos metai: 2006, 20-head weigher by Comek, model CK 20 ST Djdpewlkqdofx Ab Sskg Year of manufacture: 2006 Made in Italy

Sąlyga: geras (naudotas), Gamybos metai: 1986, Long-turning lathe make: STAR, type: JNC-16, year of manufacture: 1986, equipped with Fanuc OT control. Maximum bar capacity: 16 mm. For further specifications, please refer to the data sheets. Machine documentation available. Dkodpfx Aovbb U Hsb Seg

Sąlyga: geras (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 22012A, veleno greitis (min.): 200 aps./min, veleno greitis (maks.): 10 000 aps./min, bendras aukštis: 2 200 mm, bendras ilgis: 9 000 mm, bendras plotis: 1 500 mm, bendras svoris: 5 000 kg, valdiklių gamintojas: FANUC, valdiklio modelis: SERIES 32-i MODEL B, priešinio veleno greitis (min.): 200 aps./min, priešpriešinio veleno didžiausias greitis: 10 000 aps./min, TSUGAMI B0266E-II CNC Automatic Lathe - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 64 A - Maximum bar stock clamping diameter: 26 mm - Maximum machining length: 320 mm (synchronously driven guide bushing) - Without guide bushing: 50 mm - Maximum drilling diameter: 12 mm - Maximum tapping diameter: M10 - Diameter of deep-hole drilling: 10 mm Dksdpox Hxy Aofx Ab Sjg - Maximum sub-spindle clamping diameter: 26 mm - Maximum sub-spindle drilling diameter: 10 mm - Maximum sub-spindle tapping diameter: M10 - Maximum drilling diameter on tool spindle: 8 mm (front/rear tool holder) - Maximum tapping diameter: M6 (front/rear tool holder) - Maximum slot milling cutter diameter on tool spindle: 45 mm - Rotating guide bushing: 200 - 10,000 rpm (synchronously driven) - Tool spindle speed: 200 - 6,000 rpm - Total number of tools (standard specification): 31 - Tool size: 16 mm square x 100 mm - Rapid traverse: 32 m/min, rapid traverse in X1 and Y1: 24 m/min, in Y2: 24 m/min - Controllable axes: 6 The machine is equipped with a bar feeder from FMB, type: TURBO 3-36, and a chip conveyor. Note: The item must be collected between 04 and 12 March 2026 on a binding appointment to be coordinated in advance. FCA D-75181 Pforzheim – loaded onto truck

Sąlyga: geras (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 22006A, veleno greitis (maks.): 10 000 aps./min, veleno greitis (min.): 200 aps./min, bendras svoris: 5 000 kg, bendras plotis: 1 500 mm, bendras ilgis: 9 000 mm, bendras aukštis: 2 200 mm, valdiklių gamintojas: FANUC, valdiklio modelis: SERIES 32 i-MODEL B, priešinio veleno greitis (min.): 200 aps./min, priešpriešinio veleno didžiausias greitis: 10 000 aps./min, TSUGAMI B0266E-II CNC Swiss-Type Automatic Lathe - Operating voltage: 400 V - Rated current: 64 A - Frequency: 50 Hz - Max. bar stock clamping diameter: 26 mm - Max. machining length: 320 mm (synchronously driven guide bushing) - Without guide bushing: 50 mm - Max. drilling diameter: 12 mm - Max. tapping diameter: M10 - Deep hole drilling diameter: 10 mm - Max. clamping diameter on sub-spindle: 26 mm - Max. drilling diameter on sub-spindle: 10 mm - Max. tapping diameter on sub-spindle: M10 - Max. drilling diameter on tool spindle: 8 mm (front/rear tool holder) - Max. tapping diameter: M6 (front/rear tool holder) - Max. slot milling cutter diameter on tool spindle: 45 mm Dodjx Hwn Sopfx Ab Sjkg - Rotating guide bushing: 200 – 10,000 rpm (synchronously driven) - Tool spindle speed: 200 – 6,000 rpm - Total number of tools (standard specification): 31 - Tool size: 16 mm square x 100 mm - Rapid traverse: 32 m/min, rapid traverse in X1 and Y1: 24 m/min, in Y2: 24 m/min - Controllable axes: 6 The machine is equipped with a bar feeder by FMB, type: TURBO 3-36, as well as a chip conveyor. Attention: The item must be bindingly collected between 04 and 12 March 2026 at a mutually agreed date. FCA D-75181 Pforzheim – loaded onto truck