Ast Ausflicken Mašina pirkti naudotą (42 353)
Rikiuoti rezultatus
- Žemiausia kaina Aukščiausia kaina
- Naujausi skelbimai Seniausi skelbimai
- Trumpiausias atstumas Didžiausias atstumas
- Naujausi metai gamybos Seniausi gamybos metai
- Naujausias atnaujinimas Seniausias atnaujinimas
- Gamintojai nuo A iki Z Gamintojas nuo Z iki A
- Reikšmė
- Žemiausia kaina
- Kaina
- Aukščiausia kaina
- Kaina
- Naujausi skelbimai
- Įkėlimo data
- Seniausi skelbimai
- Įkėlimo data
- Trumpiausias atstumas
- atstumas
- Didžiausias atstumas
- atstumas
- Naujausi metai gamybos
- Gamybos metai
- Seniausi gamybos metai
- Gamybos metai
- Naujausias atnaujinimas
- Atnaujinimas
- Seniausias atnaujinimas
- Atnaujinimas
- Gamintojai nuo A iki Z
- Gamintojas
- Gamintojas nuo Z iki A
- Gamintojas
- Pavadinimas nuo A iki Z
- Pavadinimas
- Pavadinimas nuo Z iki A
- Pavadinimas
- Modelis nuo A iki Z
- modelis
- Modelis nuo Z iki A
- modelis
- Žemiausia nuoroda
- nuoroda
- Aukščiausia nuoroda
- nuoroda
- Trumpiausias veikimo laikas
- Veikimo laikas
- Ilgiausia veikimo trukmė
- Veikimo laikas
- reikšmė
- reikšmė
Mažas skelbimas
Radom
459 km
Knygos kraštų paauksavimo mašina
Leonhard Kurz Model HBook Edge Gilding Machine
Skambinti
Būklė: geras (naudotas), Leonhard Kurz modelio H knygų briaunų auksavimo mašina
Ši mašina yra labai geros būklės ir paruošta naudojimui.
Tai populiaraus gamintojo Leonhard Kurz įrenginys, pagamintas Vokietijoje.
Aprašymas
Ši auksavimo mašina tinka knygoms, atvirutėms, kvietimams ir vizitinėms kortelėms.
Rankiniu būdu valdoma spaustuvė, maitinama tik 230V įtampa. Galinga spaustuvė su reguliuojamu spaudimu užtikrina tikslumą ir pakartojamumą.
Įrenginyje įrengtas patogus medžiagos laikiklis, darbinio gylio reguliavimas, bei patogi bazė su ratukais.
Techniniai duomenys:
Mechaninė spaudimo sistema
Dkodpfx Afjy N Dxco Asl
Energijos sąnaudos: 170W
Maitinimas: 230V
Įrenginio svoris: 80kg
Mažas skelbimas
Zaleszany
520 km
Kraštų apklijavimo mašina
PGCNCOkleiniarka HH - 506R
Skambinti
Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, Šiuolaikinė briaunų klijavimo staklė, skirta baldų plokščių briaunoms tiksliai apdirbti. Įrengta tvirtomis agregatais ir pažangiomis funkcijomis, užtikrina aukštą kokybę, našumą ir lankstumą dirbant iki 20 m/min greičiu. Puikus sprendimas gamybos įmonėms, kurios vertina kokybę ir procesų pakartojamumą.
Baldų plokščių briaunų klijavimo staklė
FUNKCIJOS IR ĮRANGA
1. Išankstinis frezavimas – ruošinio briaunos paruošimas klijavimui.
2. Standartinėje versijoje klijavimo agregatas su vienu, nekeičiamu klijų rezervuaru.
3. Briaunos galų apipjovimas – tikslus pradžios ir pabaigos nukirpimas.
4. Grubus ir baigiamasis frezavimas – tobulas briaunos pritaikymas prie ruošinio.
5. Kampų užapvalinimas.
6. Skaitinimo/poliravimo agregatas (pasirinktinai) – nepriekaištingas briaunos išlyginimas ir poliravimas.
7. Galima klijuoti briaunas ant ruošinių su gręžimo angomis (pasirinktinai).
Djdpfx Aoxfq E Eof Askl
Mažas skelbimas
Sierakowska Huta
395 km
Kraštų apklijavimo mašina
JAROMADCGA-II
Skambinti
Būklė: labai geros būklės (naudotas), KATALOGO NUMERIS 7729
TECHNINIAI DUOMENYS
Įranga:
- juostos diskas
- klijų talpykla (granuliai)
- juostos tiekiklis
- giljotina – išankstinis briaunos pjovimas
- spaudimo ritinėliai, 2 vnt.
- minimalus apdirbamų detalių plotis: 50 mm
- apdirbamų detalių storis: 10–40 mm
- minimalus vidinis spindulys: 50 mm
- klijavimas kampu su 1 mm storio briauna, 0–45°
Dksdpfx Afeya Hnae Aol
- briaunos storis: 0,3–3 mm
- elektrinis padavimas
- bendra galia: 2 kW
- suslėgto oro slėgis: 6–7 bar
- matmenys (ilgis/plotis/aukštis): 1700x1300x1550 mm
- svoris: 310 kg
PRIVALUMAI
- pagaminta Lenkijoje
- nedažyta
- DTR dokumentacija
- labai gera būklė – naudota briaunavimo staklė
Kaina be PVM: 6 500 PLN
Kaina be PVM: 1 550 EUR (pagal 4,2 EUR kursą)
(Kainos gali keistis esant didesniems svyravimams)
Mažas skelbimas
Sierakowska Huta
395 km
Kraštų klijavimo mašina
Holzing G-MAX 480zarabianie naroży wstępny frez
Skambinti
Būklė: naujas, Catalogue number: HZ014
– Pre-milling
– Corner rounding
– Brand new machine, in stock
– CE certification
– Professional grade
TECHNICAL DATA
Panel thickness: 8–45 mm
Edge thickness: 0.4–3 mm
Minimum panel width: 90 mm
Minimum panel length: 170 mm
Feed speed: 9 m/min
Pre-milling speed: 12,000 rpm
Front/rear milling speed: 12,000 rpm
Top/bottom milling speed: 12,000 rpm
Corner rounding speed: 12,000 rpm
Polishing speed: 3,000 rpm
Feed motor power: 1.13 kW
Glue tank heating power: 1.315 kW
Pre-milling power: 1.5 kW
Dkodpsyy Nf Asfx Af Ael
Pre-heating power: 0.4 kW
Glue spindle power: 0.25 kW
Front/rear milling power: 0.22 kW
Top/bottom milling power: 2 × 0.37 kW
Corner rounding power: 0.37 kW
Polishing motor power: 0.12 kW and 0.18 kW
Total motor power: 6.16 kW
Working table height: 960 mm
Extended support width: 560 mm
Extraction connection: 3 × 125 mm
Dimensions (L × W × H): 3731 × 720 × 1636 mm
Weight: 915 kg
Holzing G-MAX 480 Single-sided Edgebander with pre-milling, saw cutting, top and bottom milling, corner rounding, radius scraper, and polishing provides a high-quality finish on the workpiece. Edgebanding material can be in coils up to 3 mm thick and strips up to 4 mm thick. The machine is equipped with a 1.2 kg glue tank.
Net price: 98,000 PLN
Net price: 23,300 EUR (based on exchange rate 4.2 EUR)
(Prices may vary according to exchange rate fluctuations)
Mažas skelbimas
Grońsko
593 km
Kraštų apklijavimo mašina
HebrockAKV 3005
Skambinti
Būklė: naudotas, Kantų klijavimo staklės Hebrock AKV 3005,
gerai sukomplektuotos, galima patikrinti prieš perkant,
Skysčiai prieš frezus,
Priešfreziniai įrankiai,
Klijų padengimas voleliu, su klijų išleidimu,
Komplekte antras klijų indas,
Pneumatinė preliminari giljotina,
Prispaudimo volai,
Galutinis pjūklas,
Viršutinis-apatinis frezavimo agregatas, R1 – R2 perjungiami pneumatiniu būdu,
Profilinė ciklina,
Kampų apdirbimo agregatas,
Skysčiai prieš cikliną,
Plokščia ciklina,
Poliravimo agregatas,
Maks. ritininės kantavimo juostos storis 3 mm,
Staklės labai geros būklės.
Dedsw I Sp Sjpfx Af Askl
Mažas skelbimas
Askersund
683 km
Kraštų apvyniojimo mašina
HebrockAKV 83 F
Skambinti
Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2004, Prekės ženklas: Hebrock
Modelis: AKV 83 F
Pagaminimo metai: 2004
Mašinos Nr.: 10759
Techniniai duomenys:
Apdirbamo ruošinio storis: nuo 10 iki 50 mm
Padavimo greitis: 3 – 4 m/min
Elektros jungtis: 220/380 V, 50 Hz
Dsdpju Racxsfx Af Aekl
Galia: 3 kW
Matmenys: 1750 x 800 x 1250 mm (bendri matmenys)
Svoris: apie 95 kg
Įkaitinimas: 3 kW, su bepakopiu elektroniniu temperatūros reguliavimu, 0–650°C
Variklis: 3,5 kW
Sandėlio Nr.: 2002311BXA
Mažas skelbimas
Wiefelstede
1 046 km
Frezavimo variklis krašto apdorojimo mašinos
Emod**VKV 63/2-90
Skambinti
Būklė: geras (naudotas), Double-end profiler, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor
- 1x Motor: 1.5 kW, 2770 rpm at 50 Hz
- Arbor: Ø 30 mm
- Motor mounted on guides
- Quantity: 2 motors available
- 1x: right-hand thread – 1x: left-hand thread
- Price: per unit
- Weight: 20 kg/unit
Dedpfeb A Nmdsx Af Aekl
Mažas skelbimas
Żnin
479 km
Mašina termoreaktyvi plastikui
Main GroupVilor SP345/3
Skambinti
Būklė: naudotas, Gamybos metai: 1994, Main Group Vilor tipo įpurškimo staklės plastikiniams elementams gaminti; naudotos batų padų ir kitų avalynės gamybos komponentų gamybai; papildomai prie staklių galima parduoti ir batų padų formas; įranga naudota iki prieš 4 metus, nuo tada nenaudojama; geros būklės – reikalingas remontas;
Dodpfsy Egvpex Af Askl
Mažas skelbimas
Vokietija
999 km
Vienpusės kraštų apklijavimo mašinos
SCMSTEFANI KD
Skambinti
Būklė: naudotas, mašinos/transporto priemonės numeris: 008350, Sumontuoto briaunos tipas: plona briauna, stora briauna, masyvi mediena
Klijavimo sistema: PUR
Sujungimo frezavimas: taip
Daugiafunkcis agregatas: taip
Maksimalus padavimo greitis: 20 m/min
Maksimalus plokštės storis: 60 mm
Djdpox A Tgyefx Af Aekl
Darbiniai agregatai: 7 vnt
Mažas skelbimas
Austrija
1 069 km
Kraštų juostų klijavimo mašinos 1 KETVIRTIS
HOMAGKFL10/24/PU/30
Skambinti
Būklė: naudotas, mašinos/transporto priemonės numeris: 008522, Pozicija 1: HOMAG-KFL10/24/PU/30 robotas
Pozicija 2: Vienpusė briaunų klijavimo mašina HOMAG-KFL10/24/PU/30
Pozicija 3: HOMAG-KFL10/24/PU/30 robotas
Pozicija 4: Plokščių grąžinimo įrenginys HOMAG-KFL10/24/PU/30
Dkjdpfx Aey Nx U Esf Ael
Mažas skelbimas
Austrija
1 078 km
Krašto kokybinis mašina
BRANDTKD 84
Skambinti
Būklė: naudotas, Gamybos metai: 1985, Edge thickness: 0.4 – 12 mm
Workpiece thickness: 10 – 55 mm
Minimum workpiece length: 160 mm
Minimum workpiece width: 65 mm
Feed rate: 13 m/min
Pneumatic connection: 7 bar
Total length: 5220 mm
Weight: 1950 kg
Heating tub with Quickmelt hot melt adhesive granulate
Glue roller rotation for synchronized and counter-rotation
Edge magazine for PVC rolls and strip edging
Motorized upper pressure adjustment
Pneumatically actuated pressure rollers
Swiveling control panel at machine infeed
All units are track-controlled – i.e., all workpiece-actuated limit switches are omitted
End trimming
Milling combination for bevel and radius milling with 2 swiveling units (1 unit with combination cutter for radius/straight, 2nd unit with bevel cutter) with pneumatic adjustment
Scraper – with pneumatic adjustment
Buffing
Dsdpfx Aoc Tmygjf Ajkl
Central lubrication for chain track
Quick-change glue tank
Digital counters
Electronic frequency converters with integrated motor brake
Edge monitoring with fault display
Infrared heating element
CE compliant
Note on used machines:
• Technical details subject to error and prior sale.
• Prices listed are ex-location, loaded free on truck.
• Machines have been cleaned and function-tested.
• All machines are sold as viewed, without any warranty claims. Buyers are free to inspect the machines at their location.
• Special agreements are only valid in written form.
(Enquiries will only be answered if your address and telephone number are provided!)
Mažas skelbimas
Sankt Peter im Sulmtal
1 114 km
Krašto kokybinis mašina
OTTUNIKANT 202
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 1993, max. Edge thickness: 0.2 – 15 mm
Feed speed: 12 / 18 m/min
Heating-up time: approx. 6 min
Automatic magazine (strip magazine)
Roll magazine
Machine converted for ABS edges
Granulate quick-heating tank
Guillotine: 0.2 – 3.0 mm
Flush trimming unit
Radius trimming unit
Operation via selector switch / push buttons
Extendable roller support
Soundproof enclosure
Machine length: 3,800 mm
Dksdjfbr S Rjpfx Af Ael
Note on used machines:
- Errors in technical specifications and prior sale excepted.
- Listed prices are ex location – loaded free of charge!
- The machines have been cleaned and function-tested.
- All machines are sold as inspected, without any claim to warranty. Buyers are free to inspect the machines at the site.
- Special agreements are only valid in written form.
(We only respond to inquiries specifying your address and phone number!)
Mažas skelbimas
Schwanberg
1 115 km
Krašto kokybinis mašina
SCM MiniMaxME 40TR
Skambinti
Būklė: naujas, The best-selling edge banding machine in its class with an unrivaled price-performance ratio.
SCM edge banding machine for plastic edging from 0.4 - 3 mm and solid wood edging up to 5 mm, equipped with a new corner rounding unit.
Edgebanding thickness for roll material: 0.4 - 3 mm
Maximum edgebanding thickness for strip material: 5 mm
Min. – max. workpiece thickness: 8 - 50 mm
Feed speed: 9 m/min
Pre-milling unit: 2.2 kW, 9,000 rpm
Glue pot: 0.18 kW, 0.8 kg capacity
Saw cross-cut unit: 0.19 kW, 12,000 rpm
Flush/radius trimming unit: 2 x 0.35 kW, 12,000 rpm
Corner rounding unit: 0.35 kW, 12,000 rpm
OPTIONAL FEATURES
Dkjdpfx Asc S Di Rof Ael
Radius scraper
Flat scraper
Grooving unit: 1.1 kW, 12,000 rpm, groove width 4mm
Buffing unit with 2 independent motors
Flush/radius trimming unit with tracing rollers
Heated infeed fence
Glue pot quick-change system
...
Mažas skelbimas
Schwanberg
1 115 km
Kraštų pjovimo įtaisas, kraštų pjovimo mašina
OTTTKS 1
Skambinti
Būklė: labai geros būklės (naudotas), Edge cutting device
Working height: 800 mm
Dimensions (L x W x H) approx.: 1,060 x 720 x 930 mm
Compressed air connection: 6 bar
Weight approx.: 120 kg
Djdpfx Afowiwnqe Ajkl
Including milling cutter
Mažas skelbimas
Schwanberg
1 115 km
Krašto šlifavimo mašina
LANGZAUNERLZK
Skambinti
Būklė: labai geros būklės (naudotas), heavy double-sided edge sanding machine, oscillating
Motor power approx. 3.0 kW
Oscillation with separate motor approx. 0.2 kW
Abrasive belt dimensions: 3000 mm x 200 mm
Front sanding table: 980 x 340 mm
Rear sanding table: 750 x 300 mm
Required space (L x W x H) approx.: 1800 x 1500 x 1000 mm
Weight approx. 600 kg
Front sanding table with veneer edge sanding device
Rear sanding table steplessly height-adjustable
Angle stop at rear work table
Oscillation via gear motor
Sanding beam pneumatically height-adjustable
Exchangeable radius sanding discs
Dkjdouxqzujpfx Af Asl
Pneumatic, adjustable belt tensioning
Extraction with blower
Mounting option for feed unit
2 lateral support tables for radius sanding
Note on used machines:
• Errors in technical details and prior sale reserved.
• Quoted prices are ex works and for self-collection – free loading!
• The machines have been cleaned and function-tested.
• All machines are sold as seen, without any warranty claims.
Buyers are free to inspect the machines at their location.
• Special agreements are only possible in written form.
(We only respond to inquiries with your address and telephone number!)
Mažas skelbimas
Schwanberg
1 115 km
Krašto šlifavimo mašina
LANGZAUNERLZK 3-1
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 1992, Belt dimensions: 2600 x 150 mm
Motor power (grinding belt): 2.2 kW
Operating voltage: 3 x 400 V + PE / 50 Hz
Grinding table height adjustable via handwheel
Table size: 975 x 340 mm
Height-adjustable grinding table for radii; size: 400 x 200 mm
Grinding arm swivels 90° – 0°
Extraction connection: Ø 120 mm
CE-compliant
Required space (L x W): approx. 1600 x 725 mm
Weight: approx. 320 kg
Used machine notice:
• Technical details and prior sale subject to change.
• Stated prices are ex-location, loaded free on truck.
• The machine has been cleaned and functionally tested.
• All machines are sold as inspected, without any warranty or guarantee.
Buyers are welcome to inspect machines on site.
• Special agreements are only valid in written form.
Dkedpfxott Da Dj Af Aol
(We only respond to inquiries including your address and telephone number!)
Mažas skelbimas
Schleswig
919 km
Plastiko apdirbimo mašina
Skambinti
Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2014, veikimo valandos: 2 200 h, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, Įranga: dokumentacija / vadovas, Plastic Window Recycling Plant with Granulate Output (12 mm / 40 mm)
Dsdpfjy I Urdsx Af Ajkl
The recycling plant is designed as a modular processing line for handling dismantled plastic windows. The aim of the plant is the efficient shredding, separation, and classification of material into reusable plastic granulate of defined grain sizes (approx. 12 mm or 40 mm).
The plant consists of the following main components:
1. Feed and Conveying System
The input material (plastic windows including attachments such as seals, metal fittings, and contaminants) is manually loaded via a feed area.
2. Pre-Shredding (Shredder)
A high-performance four-shaft shredder performs the coarse comminution of the window frames. The objective is to reduce bulky components to a manageable size and to prepare them for the subsequent process steps.
3. Conveyor Technology
Several conveyor belts link the individual processing stages. They ensure a consistent material flow and optionally allow for manual visual inspection or additional sorting.
4. Metal Separation
To remove metallic components (e.g., steel reinforcements, screws, fittings), a magnetic separator is installed. This is implemented as an overband magnet and reliably extracts ferrous metals from the material stream.
5. Screening Unit (Classification)
The shredded material passes through a screening unit. This separates the particles according to grain size. Defined fractions are produced depending on the screen deck used, for example:
Approx. 12 mm granulate (fine)
Approx. 40 mm granulate (coarse)
6. Cleaning / Removal of Contaminants
Light impurities (dust, seal residues, foreign materials) are removed by mechanical or air separation methods. This enhances the quality of the final granulate.
7. Discharge and Storage
The finished granulate is discharged via conveyor belts into big bags.
Mažas skelbimas
Vokietija
1 106 km
Kraštų klijavimo mašina iki 100 mm klijavimo aukščio
Lange MaschinenbauB 70 K-100
Skambinti
Būklė: naudotas, Gamybos metai: 2018, Used machine
Year of manufacture: 2018
Special feature: Machine suitable for up to 100 mm edging height!
Condition: factory-checked by Lange Maschinenbau
Features and technical data:
- Machine table with 13 roller tracks for improved workpiece guidance
- Edge feeding synchronized with conveyor belt
- Edge thickness adjustable via digital counter
- Pneumatic roller separation with knife (for cuttable edges)
- Three pressure rollers
- Belt feed:
- 0.25 kW
- approx. 1250 mm long
- approx. 6.0 m/min
- 50 mm wide toothed belt with thick, workpiece-friendly rubber overlay
- Digital counter for height adjustment
- Direct glue application to the workpiece: drip-free glue pot with glue reservoir from below and fast heat-up time after machine downtime
- End trimming unit:
- For workpiece front and rear edges
- Automatic sensing on the workpiece
- Pneumatic trimming with blade for cuttable edges
- Flush-milling unit
- With vertical tracing and horizontal guidance
- Reproducible settings via digital counters
- 2 powerful 0.4 kW high-frequency motors
- Infinitely adjustable from 4,000 to 18,000 rpm
- Cutter Ø 70 mm, Z4, radius 2 mm/15°
- Central extraction connection Ø 100 mm
- 2 chip extraction hoods with hose Ø 60 mm
- Automatic height adjustment of the top milling cutter with the belt feed
- Continuous workpiece support approx. 1800 mm long
- Workpiece support rail, extendable by approx. 300 mm
- Rotatable edge tape reel Ø: 800 mm
- Workpiece width: min. approx. 80 mm
- Workpiece thickness: 10 – 100 mm
- Workpiece length: min. approx. 220 mm
- Edge thickness: 0.4 – 2.0 mm
- Roll separation: max. 1.0 x 55 mm, 2 x 45 mm
- Glue pot heating power: 2.7 kW
- Heat-up time: approx. 10 minutes
- Working height: approx. 880 mm
- Electrical connection: 400V, 50 Hz, 3Ph + N
- Total connected load: 3.8 kW
- Pneumatic connection: 6 bar
Dimensions (without tape reel): approx. 1800 x 700 x 1300 mm
Weight: approx. 260 kg
Dodpfx Afewka S Ij Ajkl
Availability: short-term
Location: Flörsheim
Mažas skelbimas
Vokietija
1 106 km
Krašto šlifavimo mašina
WegomaKS 2640
Skambinti
Būklė: naudotas, Gamybos metai: 2000, Used machine
Year of manufacture: 2000
Features and technical data:
- Grinding unit can be swiveled via hand crank
- The machine frame is made of welded steel for high torsional rigidity and vibration-free operation
- Oscillating sanding belt with separate gear motor for improved sanding results
- Oscillation can be activated as required
- Graphite-coated sanding shoe for increased belt service life
- Height-adjustable sanding table to utilize full sanding belt width
- Auxiliary table for sanding radii with integrated extraction ports
- Spring-loaded belt tension compensates automatically for belt length differences
- Adjustable stops make it ideal for veneer sanding
- Veneer overhang can be sanded down effortlessly
- With mobility device/casters
- Oscillation motor power: 0.11 kW
- Connection voltage: 400 V
- Mains frequency: 50 Hz
- Sanding belt length: 2,640 mm
- Sanding belt width: 150 mm
- Belt speed: 14 m/s
- Oscillation stroke: 15 mm
- Sanding area length: 800 mm
- Sanding area width: 150 mm
- Swivel range of sanding unit: 0–45°
Djdpjwkbcbjfx Af Aekl
- Worktable length: 950 mm
- Worktable width: 450 mm
- Worktable height adjustment: 110 mm
- Dimensions: 1,700 × 1,000 × 1,150 mm
- Weight: 300 kg
Availability: short-term
Location: Flörsheim
Mažas skelbimas
Vermești
991 km
Kraštų juostavimo mašina kreivinėms plokštėms
DANIBRUMAC Contur 2
Skambinti
Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, galia: 6,5 kW (8,84 AG), įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, briaunos storis (maks.): 3 mm, aukščio reguliavimo tipas: mechaninis, suslėgto oro jungtis: 6 juosta, plokštės ilgis: 1 200 mm, produkto aukštis (maks.): 3 mm, bakelio talpa: 3 l, garantijos trukmė: 12 mėnesiai, DANIBRUM AC CONTUR 2 – Kantenschleifmaschine für gebogene, runde und unregelmäßige Platten
Die DANIBRUM AC Contur 2 ist die ideale Lösung für das präzise Bekanten von Platten mit Sonderformen – von ovalen, runden und rechteckigen Teilen bis hin zu nicht definierten, gebogenen Geometrien. Dank eines fortschrittlichen mechanischen Vorschubsystems und einer verstellbaren Profilierungseinrichtung ist die Maschine äußerst flexibel: Sie verarbeitet sowohl 90°-Winkel als auch offene und geschlossene Bögen.
Ein besonderer Vorteil dieser Maschine ist die hochpräzise Kantenbearbeitung, die durch einen Lasersensor ermöglicht wird, welcher die Stoßenden des Kantenbands exakt synchronisiert. Dadurch entsteht eine makellose Verbindung mit einer Toleranz von nur ±0,3 mm.
Die Bedienung erfolgt intuitiv über ein Touchscreen-Interface, das eine schnelle Anpassung aller Arbeitsparameter erlaubt. Das System verfügt über einen vakuumgestützten, mobilen Arm, der auf bis zu 2250 mm ausziehbar ist und während des Bearbeitungsprozesses für eine zuverlässige und stabile Werkstückunterstützung sorgt.
Für eine sichere und effiziente Nutzung ist die Maschine mit einem Fußpedalsteuerungssystem ausgestattet. Die stufenlos regulierbare Vorschubgeschwindigkeit ermöglicht das Bekanten von 0 bis 30 cm/s sowie die Längsprofilierung von 0 bis 24 cm/s.
Optimiert für anspruchsvolle Werkstücke
Die Maschine ist ausgelegt auf:
Kantenbanddicke: 0,5 – 3 mm
Plattenstärke: 12 – 60 mm
Mindestarbeitsradius: 20 mm
Geeignet für verschiedene Plattenformate:
Runde Werkstücke bis Ø2400 mm
Rechteckige Platten: 1200 x 2400 mm
L-förmige Platten: 1400 x 1600 mm
Ausgestattet mit Hochgeschwindigkeitsprofilfräsern für die Längsbearbeitung (24.000 U/min), garantiert sie auch bei komplexen Konturen eine ausgezeichnete Oberflächenqualität.
Die AC Contur-Serie umfasst mehrere Modelle, darunter die AC Contur 2 und die AC Contur 3 – Letztere mit zwei ausziehbaren Armen für eine gesteigerte Produktivität.
Technische Daten
Kantenbanddicke: 0,5 – 3 mm
Mindestarbeitsradius: 20 mm
Plattenstärke: 12 – 60 mm
Materialabmessungen:
Dsdpfx Ajwg E Hvjf Ajkl
Rund: Ø2400 mm
Rechteckig: 1200 x 2400 mm
L-Form: 1400 x 1600 mm
Fräserdrehzahl (Längsprofilierung): 24.000 U/min
Vorschubgeschwindigkeit:
Kantenanleimen: 0 – 30 cm/s
Profilieren: 0 – 24 cm/s
Stoßtoleranz Kantenband: ±0,3 mm
Druckluft: 0,6 – 0,8 MPa
Arbeitstemperatur: 110 – 210°C
Leimbehältervolumen: 2,6 Liter
Armlänge (ausgezogen): 2250 mm
Installierte Leistung: 6,5 kW
Stromversorgung: 400 V – 3 Phasen – 50 Hz
Gewicht: 430 kg
Maschinenabmessungen (LxBxH): 1870 x 1400 x 1530 mm
Mažas skelbimas
Nattheim
1 177 km
Kraštų apklijavimo mašina su sujungimu
StefaniSolution XD
Skambinti
Būklė: naudotas, Gamybos metai: 2016, Industrial Automatic Edge Banding Machine SOLUTION XD MAIN FEATURES "E TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: ONE "TOUCH" IS ENOUGH TO OPERATE THE MACHINE Standard pressure unit with drive belt for optimal panel guidance Edgebanding of rolls, strip edges and solid wood edges GENERAL FEATURES: Single-sided edge banding machine in left-hand version for edgebanding of rolls and strip edges with all conventional hot-melt adhesives. The base frame consists of a stable welded steel stand with high rigidity, providing optimal support for the processing units. The upper pressure section consists of a thick-walled steel profile and a double trapezoidal drive belt, which is automatically positioned to match the panel thickness. Height adjustment with display on the upper pressure and operator interface. Manual panel feed system with large-sized working line and enlarged support area facilitates the introduction of large workpieces. Adjustable infeed fence in two positions with automatic selection for processing with or without pre-milling. Working units are attached to the pressure beam and mechanically linked to ensure automatic adjustment when changing panel thickness. Lower working units are fixed either to the machine base or the longitudinal rail for precise referencing to the panel. All high-frequency motors are controlled by frequency inverters; each working unit is equipped with its own inverter for optimal flexibility and improved production times. Hood for all units located after the glue station; polycarbonate windows provide good visibility during processing. Internal lighting of the hood with sound-absorbing material for lower noise emissions during operation. Spacers on the infeed fence enable proper spacing of the panels; the distance is automatically adjusted to the selected feed speed. Swiveling control panel, located at the panel infeed area, adjustable for ergonomic operation. Electrical system complies with current regulations, electrical components housed in a metal enclosure fixed to the machine frame with doors for easy access during maintenance. Standard voltage is 400 V EU 50 Hz (with neutral). Material feed by feed chain with 80 mm wide chain plates made from rubber-coated nylon, for optimal guidance and high durability. The chain runs on two rails made from hardened and ground steel, one round and one flat, to guarantee straight movement and prevent lateral displacement. Pneumatic chain lubrication; lubrication oil quantity is controlled via the PLC, adjusted according to the processed panels. External roller conveyor runs along the entire machine length; extendable up to 650 mm opening system (for panels up to a maximum width of 1200 mm). E-TOUCH PC control system for quick and easy execution of main functions, including: program processing in Just in Time mode, option for management via material lists, and management functions by reference.
Dedpsxy Tm Iofx Af Ajkl
Patikimumo ženklas
Machineseeker sertifikuoti platintojai

Mažas skelbimas
Nattheim
1 177 km
Kraštų apklijavimo mašina su sujungimu
BrandtKD 88 FQ Optimat
Skambinti
Būklė: naudotas, Gamybos metai: 1996, Krašto storis: 0,4 - 12 mm Ritininio krašto storis: 3 x 45 mm arba 0,8 - 60 mm Minimalus ruošinio plotis: 65 mm Minimalus ruošinio ilgis: 160 mm Ruošinio storis: 10 - 55 mm Pasiūla: 13 m/min Išankstinis frezavimas (sujungimas) Klijų rezervuaras Quickmelt Klijavimo mazgas Nupjovimas Briaunos frezavimas Fasavimo frezavimas Spindulinis frezavimas Kampų kopijavimas Plokščia traukimo ašmenys Šlifavimo agregatas Staklių matmenys: 7450 x 1220 x 2400 mm Svoris: 3000 kg Sandėliavimo vieta: Nattheim
Dkjdpfx Aovvkd Tof Ajl
Mažas skelbimas
Nattheim
1 177 km
Kraštų apklijavimo mašina su sujungimu
Holz-HerContriga 1366
Skambinti
Būklė: naudotas, Gamybos metai: 2009, HOLZ-HER Edgebander CONTRIGA 1366
Edge thickness: 0.4–30 mm (depending on equipment)
Edge height: 51/66 mm (depending on equipment)
Panel thickness: 6–45/60 mm (depending on equipment)
Edge types: Coil and strip material
Feed speed: Infinitely variable feed from 12–30 m/min (depending on equipment)
- With adjustable infeed table in the magazine area (max. adjustment range 30 mm)
- With height-adjustable magazine disc for modifying the lower edge overhang
- Large magazine disc Ø 820 mm for edge coils up to Ø 800 mm
- With transport chain incl. automatic central lubrication
- With motor-driven, position-controlled bridge height adjustment
- With pneumatic stop roller for shortest workpiece spacing
- With extendable workpiece support (extension length 1600 mm)
- With space-saving, pneumatically operated sliding hoods over the entire machine (deviations possible on individual aggregates)
- With motorised infeed fence
- With spray oiler for lubricating all joints and bolts (including operating hour counter)
- With central connection for extraction (2x Ø 200 mm)
- With integrated chip collection box at the end of the machine (when radius scraper unit installed)
Control PPC 231 - Power PC for efficient setup and tool changes
- 15” SVGA touch screen
- CF memory card 128 MB
- USB port on board
- Ethernet network connection
- Keyboard connector on board
- Windows-like user interface
- All information in clear text and/or graphics
- Rotatable and swivelling operator console at eye level
- Dust-proof membrane keypad with soft keys (pushbuttons)
- LED indicator for aggregate preselection
- Program list with program names and numbers
- Extensive program memory
- Individual selection of aggregates with functions for basic settings, set point values, position points, and tool corrections, as well as fixed position points
- Setup operations for aggregates and axis settings centrally and clearly via fine adjustment (depending on equipment)
- Interval display for minimum workpiece distance
- Integrated position control
- Position points generally or program-specifically controlled
- Clear and complete capture of all operating data
- Service messages in plain text
- Diagnostic system
- Incl. integrated synchronous bus system for high accuracy in aggregate control
- Individual management for up to ten users, incl. password protection
- Online maintenance (optional), data exchange with HOLZ-HER Service
- Barcode interface (optional)
BASE MACHINE CONTRIGA 1366 – Belt bridge
Options and accessories for the base machine
Spraying unit 1856 for infeed and outfeed area
For the infeed area:
Electronically controlled separating agent spray unit with separating agent Riepe-LPZ/II
For the outfeed area:
Electronically controlled cleaning agent spray unit with cleaning agent Riepe-LP163/93 (only in combination with jointing milling unit 1961 and flat scraper 1964)
Jointing milling unit
Jointing milling station 1803 (2x 2.6 kW, 200 Hz, 12000 rpm)
- With two plunge-controlled milling units
- 1 unit counter-rotating
- 1 unit co-rotating
- Plunge depth 5 mm
- With static frequency converter 200 Hz
- Without milling cutters
- With ProLock screw-in chuck for quick tool change
Tooling for 1803 (workpiece height up to 60 mm):
Diamond cutters PRO UT, 2 pcs. (front and rear) incl. protective hoods Ø 100–63 - Ø 30 mm, Z = 3 + 3 + 3, 1x LH, 1x RH
Dkodpfjvvkfdjx Af Asl
Noise-reduced cutter with integrated chip guide, DFC technology (Leitz system)
Maximum chip removal 2 mm at 60 mm height
Mažas skelbimas
Nattheim
1 177 km
Kraštų apklijavimo mašina su sujungimu
Brandto KD 69/2 CF
Skambinti
Būklė: naudotas, Gamybos metai: 2002, Mašinos ilgis: 6240 mm Svoris: 2400 kg Prisijungimo galia: 14 kW Ištraukimo skersmuo: 120 / 140 mm Sandėliavimo vieta: Nattheimas
Dodpfx Afevvkfws Askl
Mažas skelbimas
Nattheim
1 177 km
Kraštų apklijavimo mašina su sujungimu
HebrockAKV 3005 DK - F Airtronic
Skambinti
Būklė: naudotas, Gamybos metai: 2011, pneumatinis frezavimo nustatymas (tiesus/radiusas) Kombinuota frezavimo stotis R=2 Kampų apvalinimo freza R=2 iki 40 mm Sujungimo freza iki 40 mm Plokščias grandiklis Profilinis grandiklis R=2 trumpoms detalėms Valdymas SPS su Pro Face jutikliniu ekranu Nestingas Aušinimo/antistatika purškimas - airtronic Apsauginis briaunos purškimas Riepe su keičiamu rezervuaru Ruošinio storis: 8–60 mm Mechaninis briaunų spaudimas Ištraukimo jungtis: 140 mm Matmenys: Ilgis su išsikišimu: 4984 mm Gylis su ritininiu stalu: 1425 mm Maks. aukštis: 1618 mm Darbo stalo aukštis: 888 mm Svoris: 1400 kg
Sandėliavimo vieta: Nattheim
Dsdpfoxyiilox Af Ajkl
Palengviname jums paiešką: "ast ausflicken mašina"
Jūs iš karto ir nemokamai gausite naujus pasiūlymus el. paštu.
Galite bet kada paprastai nutraukti paieškos užduotį.
Naudota Ast Ausflicken Mašina (42 353)
Dabar ieškokite visame Machineseeker su daugiau nei 200 000 naudotų mašinų.Naršykite populiariausius mašinų pavadinimus:
- 3 Ašys Skaitmeninis Ekranas
- 4 Ašis Cnc Vielos Lenkimo Mašina
- Achs Edu
- Aks 202
- Bi-Ašinis Maišytuvai
- Dsd 201
- Dėžė Skalbimo Mašina
- Ga 11 Ff
- German








































































































































































































































































