Apsauga pirkti naudotą (1 758)

Sąlyga: naudotas, bakelio talpa: 5 000 l, GENERAL Features: Crane lugs Design: suspended Remarks: 2 containers (6169-3+5) with broken intermediate flange at the gearbox Speed: 26 - 101 rpm Internal diameter: 1,800 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be checked) Total height: 4,200 mm Heating/Cooling: available Power: 6.8 kW Max. permissible operating temperature: 60°C Max. permissible operating pressure: 10.0 bar Mechanical seal: Mechanical seal with thermosiphon vessel Agitator: Beam agitator Location: Bremen Technical documentation: Drawing, TÜV papers Jacket heating/cooling (cylinder): Half-pipe coil Nameplate: Volume: 5,000 liters Jacket volume: 98.0 liters Cylinder wall thickness: 6.0 mm Jacket material: Stainless steel V2A 1.4541 (AISI 304) Product-contact material: Stainless steel V2A 1.4541 (AISI 321) Condition: Used Cylindrical height: 1,750 mm Previous use: Chemical industry VESSEL Max. permissible operating temperature: 60°C Base design: Ring base HEATING/COOLING JACKET Base heating/cooling: Half-pipe coil FEATURES Manhole/Dome: on top cover Outlet: Flange DN80 Note: slight residues Nodpfxsxqbuho Af Iekt MATERIAL SPECIFICATION Foot material: Steel AGITATOR Agitator manufacturer: Ekato Voltage: 380/660 Volt Baffle: Agitator location: Centered in top cover TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5.4 mm Top wall thickness: 9.0 mm

Sąlyga: naujas, Fiber Laser Cutting System FLV-3015-CH 1.5kW / VF1530-1500W Technical Specifications - Maximum sheet size: 3000 x 1500 mm - X and Y-axis positioning accuracy: ±0.05 mm/m - Repeatable X and Y-axis positioning accuracy: ±0.03 mm - Maximum speed: 40,000 mm/min - Maximum acceleration: 0.5 G - Maximum load capacity: 1200 kg - Laser power: 1.5 kW - Power requirement: 12.0 kW - Laser source brand: MAX Photonics - Power connection: ~3x400 V 50 Hz - Protection class: IP54 - Length: 4500 mm - Width: 2300 mm - Height: 1920 mm Nodpfx Ajx A U Hzsf Iokt Cutting capacity - Carbon steel: recommended thickness 12.0 mm, maximum thickness 16.0 mm - Stainless steel: recommended thickness 5.0 mm, maximum thickness 6.0 mm - Aluminium: recommended thickness 3.0 mm, maximum thickness 4.0 mm - Brass: recommended thickness 2.0 mm, maximum thickness 3.0 mm Machine design - Construction type: welded - Number of support legs: 8 - Servo drives: Schneider - Rack and pinion: helical gears - Linear guideways: HIWIN - Gearbox: Motovario - Gear racks: YYC - Ball bearings: NSK - Pressure regulators: SMC - Cooling: water chiller Automatic lubrication system for axis guides. Operator convenience Loading heavy sheets is facilitated by built-in transport balls, which ensure smooth sliding during loading. Small finished parts can also be retrieved more easily thanks to drawers under the machine that can be conveniently pulled out using a practical handle. RayTools cutting head with autofocus Option - Otinus Protect This product provides dedicated protection for your laser source. With this service, you ensure that your business continuity is protected. We secure your operations so you can complete your orders on time. Control panel Runs Windows and CypCut software, which offers features such as design, file import and export, and work optimization. Installed software comes with lifetime licenses. The machine is equipped with a wireless controller. Professional support We maintain continuous contact with our customers. Therefore, each purchased machine comes with an Otinus Specialist Assist hourly support package. Otinus Academy learning software With the purchase of this unit, you will receive one year of access to online courses, allowing you to train new employees or refresh knowledge gained in training. Free drawing package Every Otinus laser cutting machine comes with a ready-to-use package of CAD drawings. Included in the machine price 2-day commissioning and operator training - Day 1, up to 8 hours – commissioning and control system explanation. - Day 2, up to 8 hours – independent work on the machine under the supervision of our technician – possibility to program customer-specific parts. Professional consultation - By phone: 7:30 am to 9:00 pm (Mon-Sat) – 8-hours package valid within 12 months. - Online: 7:30 am to 2:30 pm (Mon-Fri) – 8-hours package valid within 12 months. Access to online learning courses - LibreCad – 12 months access Additionally included - CAD drawing package

Sąlyga: naudotas, - Hidrauliniams įrankiams, esant maksimaliam tvirtinimo ilgiui, - Sriegis: M44x1,5, - Užraktas dešininis. Nksdelkcdvjpfx Af Iot Kaina už vienetą: 60,00 € + PVM. Yra: 3 vnt.

Sąlyga: naujas, Gamybos metai: 2025, Lakštinis pluoštinio lazerio metalo pjovimo įrenginys su pilna apsauga Maksimalus pjovimo plotas siekia iki 12000 mm x 2500 mm, todėl tinka įvairiems pjovimo poreikiams. Specialus pluoštinio lazerio antgalis ir pjovimo technologija užtikrina greitesnį deguonies pjovimą anglies plienui, ekonomiškesnį mažo slėgio azoto naudojimą nerūdijančiam plienui ir aukštesnę kokybę oro pjovimui anglies pliene. Pjovimo našumas ir efektyvumas pagerinami išlaikant tolygią dujų tėkmę su minimaliu turbulentiškumu. Pluoštinio lazerio galvutės geba aptikti išsikišusias kliūtis, kas padeda sumažinti pažeidimų dažnį ir sumažina pjovimo įrenginio eksploatacines išlaidas. Nkjdpfx Afshv U Tis Ijt Pjovimo procesas veikia net plonų lakštų kraštuose bei užtikrina, kad neliktų vibracijos žymių. Su funkcija „Vieno mygtuko apdorojimas“ vienas lazerinis pjovimo įrenginys gali apdoroti kelis lakštus partijomis su viena nustatymų programa, taip pasiekiamas serijinis gamybos efektyvumas. Būklė: Nauja Lazerio tipas: Pluoštinis lazeris Lazerio galia: 1000W - 40000W Pjovimo plotas: 3048*1524mm – 12500*2600mm Pjovimo greitis: 0-110 m/min Pozicionavimo tikslumas: ±0,05 mm Perpozicionavimo tikslumas: ±0,03 mm Palaikomi grafiniai formatai: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC valdymas: Taip Aušinimo būdas: Vandens aušinimas

Sąlyga: naudotas, Skaitmeninės apsaugos – gamintojas SIEMENS SIPROTEC, 3 vnt. 7SJ6 serijos (viršsrovės ir trumpojo jungimo), 2 vnt. 7SA6 serijos (atstumo) bei 1 vnt. 7SD5 serijos (diferencinė). Užsakymo numerius atsiųsime pageidavus. Njdpfjyagx Esx Af Ijkt

Sąlyga: naudotas, Thermostat, sensor Njdjd Ttr Hspfx Af Iskt - Adjustment range: -10...+12 - Quantity: 2 available - Price: per piece - Weight: 0.7 kg

Sąlyga: naudotas, Motor protection relay, relay, heating current monitoring, pre-heating unit for generators, contactor, solid-state contactor, contactor Nedpfx Asdahcref Ijkt -Type: 3UA60 00-2X -Price: per piece -Quantity: 1 unit available -Weight: 0.8 kg

Sąlyga: naudotas, Motor protection relay, relay, heater current monitoring, preheating for generators, contactor, solid-state contactor, contactor -Type: 3UN62-00-2H Nkjdpodahctjfx Af Iet -Price: per unit -Quantity: 1 available -Weight: 0.8 kg

Sąlyga: naudotas, Slat aprons, Samurai aprons, machine protection, protective cover, bellows, protective cover system, protection system, guide protection, - Width: 730 mm - Extendable to: 1600 mm - Quantity: 2 covers available Nsdpfed Nkr Dex Af Iokt - Price: for both units - Dimensions: 1600/730/165 mm - Weight: 34 kg/unit

Sąlyga: naudotas, Respiratory protection filter -Clean AIR: basic 2000 Nsdped N Ap Eofx Af Iekt -P SL R Item no.: 80 00 10 -Price: per unit -Quantity: 17 pieces -Dimensions: Ø 131/54 mm -Weight: 0.1 kg/unit

Sąlyga: naudotas, Motor contactor, auxiliary contactor, contactor, solid-state contactor, contactor, surge protection switch, protective plug -Manufacturer: Phoenix Contact, surge protection plug OVP -Type: PLT-SEC-T3-24-P Nkjdjf I Hqfepfx Af Iet -Quantity: 3 pieces available -Price: per piece -Dimensions: 60/17/H45 mm -Weight: 0.1 kg

Gamybos metai: 2011, Sąlyga: naudotas, Hydronic system, hydraulic unit, diaphragm expansion tank, compressed air tank, pressure vessel, pressure tank, air receiver, pressure vessel - Electric heater - Manufacturer: Schniewindt - Type: 97/DF 15 Nksdpfxsd Dvgps Af Iot - Power: 15 kW - Connection: DN30 stainless steel - Permissible operating overpressure: - Centrifugal pump - Manufacturer: Tamel, 2.2 kW - Quantity: 2 units available - Price: per unit - Cabinet dimensions: 940/740/H1870 mm - Weight: 406 kg

Sąlyga: naudotas, Frost sensor, thermostat, sensor - Active capillary tube sensor for measuring minimum temperatures within the range of 0...15 °C - Voltage: 24 V Nkodpfx Asd Ttrwsf Ijt - Protection class: IP42 - Weight: 0.5 kg

Sąlyga: naudotas, Motor protection relay, relay, heating current monitoring, preheating for generators, contactor, solid-state contactor, contactor -Type: 3RN1011-1BB00 -Price: per piece -Quantity: 7 units available -Weight: 130 g Nksdpfx Asd Tvt Tef Ist

Sąlyga: naudotas, Safety window, safety enclosure -for machine tools, grinding machines, machining centers -Frame: stainless steel -Dimensions: 387 x 438 mm -Frame size: 475 x 425 mm -Glass thickness: 20 mm -Quantity: 8 panes available Nkjdpfjb A Ntlox Af Ist -Price: per piece -Weight: 6 kg/unit

Sąlyga: naudotas, Motor protection relay, relay, heating current monitoring, preheating for generators, contactor, solid-state contactor, contactor -Type: 3RN1010-1BB00 -Price: per unit Nkodpfod Tvukjx Af Ist -Quantity: 12 available -Weight: 130 g

Sąlyga: naudotas, Cable protection ring -Type: KSR-910 light grey Nkedpfxjb A Svwe Af Iot -Cable protection rings per package: 25 -Packages: 15 units -Price: per package -Weight: 3.6 kg

Sąlyga: naudotas, Laminated aprons, Samurai aprons, machine protection, protective cover, bellows, protection cover system, guard system, guideway protection. Nkedpsdu U T Tefx Af Iet -Cover comes from: a WMW boring mill -For guideway inner dimensions: 100 x 725 mm -Extendable: mm -Dimensions: 950/820/H150 mm -Weight: 30 kg

Sąlyga: naudotas, Thermostat, sensor Nodpfxed Ttr Ej Af Iekt - Setting range: -10...+12°C - Weight: 0.7 kg

Sąlyga: geras (naudotas), Variklio apsaugos relė, relė, šildymo srovės stebėjimas, išankstinis šildymas generatoriams, kontaktorius, puslaidininkinis kontaktorius, kontaktorius, variklio apsauga, stebėjimo relė, termistorius - Gamintojas: Schiele, variklio apsaugos relė MSS mecotron 2 C/O, nenaudota, originalioje pakuotėje - Prekės Nr.: 2.430.810.93 Nkedpfspxq Uyjx Af Ijt - Įtampa: maks. 250 V / A1/A2: AC/DC 24V - Kiekis: 17 relės sandėlyje - Kaina: už vienetą - Pakuotės matmenys: 80/25/H100 mm - Svoris: 0,1 kg/vnt.

Sąlyga: naudotas, Motor protection relay, relay, heating current monitoring, preheating for generators, contactor, solid-state relay, contactor, motor protection, monitoring relay -Manufacturer: BTR, Motor Protection Relay Type CPW-E12, 2 pieces, original packaging Nkjdpfx Afjitapme Iot -Part no.: 110 281 05 20 -Voltage: 230V AC -Price/Sale: complete as a set -Package dimensions: 120/80/H50 mm -Weight: 0.3 kg

Sąlyga: geras (naudotas), Circuit breakers, motor protection switches, circuit breakers, and isolators for low-voltage networks; circuit breakers for transformer, generator, and plant protection; load break switches, isolators. - Manufacturer: Moeller, Motor protection switch - Model: PKZMO 1-06 Nkjdpfxetxkqvo Af Ijt - Quantity: 5 switches available - Price: per piece - Dimensions: 85/55/H80 mm - Weight: 0.2 kg each

Sąlyga: geras (naudotas), Apsauga nuo atsitrenkimo, atitvaras, stelažų apsauga, kolonų apsauga, kolonų apsauga nuo atsitrenkimo, stelažų atsitrenkimo apsauga, kampinė atitvaras - Apsauga nuo atsitrenkimo: stelažų atsitrenkimo apsauga, kampinė atitvaras - Tipas: L formos - Aukštis: 400 mm - Kiekis: yra 5 vnt. - Kaina: už vnt./visą komplektą 95 € - Matmenys: 310/150/H400 mm - Svoris: 6,6 kg/vnt. Nkedpfx Afsvrdk Ss Ist

Sąlyga: labai geros būklės (naudotas), Motor protection relay, relay, heating current monitoring, preheating for generators, contactor, semiconductor contactor, contactor, motor protection, monitoring relay, thermistor - Manufacturer: Schiele, motor protection relay MSS mecotron 1 C/O unused, in original packaging - Part No.: 2.430.801.11 - Voltage: 220–240V AC - Quantity: 2 relays available Nksdjlry Sxepfx Af Ijt - Price: per unit - Package dimensions: 100/80/H25 mm - Weight: 0.2 kg

Sąlyga: labai geros būklės (naudotas), Safety window, safety enclosure -for: machine tools, grinding machines, machining centers -Frame: made of stainless steel -Dimensions: 798 x 459 mm -Glass thickness: 17 mm -Quantity: 14 panes available -Price: per unit -Weight: 8 kg/unit Nkedpfxjb A Ntmo Af Iot