Aircenter Sm 12 pirkti naudotą (73 112)

Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 3430, Gamybos metai: 2005, keliamoji galia: 22 000 kg, kėlimo aukštis: 5 000 mm, stiebo tipas: dupleksas, šakių laikiklio plotis: 250 mm, šakių ilgis: 2 400 mm, bendras ilgis: 6 300 mm, bendras plotis: 3 020 mm, darbinė masė: 34 600 kg, papildomos įrangos savybės: Weight indicator, Įranga: apšvietimas, SMV SL25-1200A iš Uniktruck Hfjdpfev Rrcaex Acuon

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2014, veikimo valandos: 5 612 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 48 t, pildymo angos plotis: 1 020 mm, pildymo angos ilgis: 1 250 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 550 kg, bendras aukštis: 2 800 mm, bendras svoris: 12 000 kg, transporto aukštis: 2 800 mm, alyvos bako talpa: 300 l, galia: 30 kW (40,79 AG), tuščias svoris: 12 000 kg, tūrio srautas: 332 m³/val, Technical Data – Baler: Manufacturer: HSM GmbH + Co. KG Model: VK 4812 Year of construction: 2014 Operating hours: 5,612 hours (as of August 2025) Main press force: 48 t Specific press force: 58.2 N/cm² Feed opening dimensions: 1,250 x 1,020 mm Theoretical cycle time: 11.2 s Hedpfx Ajvtpq Hocusfn Theoretical throughput: 332 m³/h Bale dimensions: 1,100 x 750 x 600 to 1,200 mm Drive power: 30 kW Total connected load: 32 kW Rated current: 59 A Binding: 4-fold horizontal, fully automatic Throughput rates, depending on material: Bulk density 20 kg/m³: up to 6 t/h Bulk density 50 kg/m³: up to 13 t/h Bale weights: up to 550 kg, depending on material PLC control: Siemens SIMATIC S7-200 Operator panel: Siemens HMI touch panel Hydraulic tank capacity: 300 L Oil type: HVI 46 Machine installation dimensions with bale chute: 10,046 x 4,387 x 2,705 mm (L x W x H) Transport dimensions (baler only): 8,500 x 2,500 x 2,750 mm (L x W x H) Machine weight (baler): approx. 12 t Scope of delivery: – HSM VK 4812 baler, without hydraulic oil, without conveyor technology – Two wire spool boxes for 8 x 40 kg wire spools, without wire – Bale chute – Machine documentation in German Remarks: The baler is equipped with an oil cooler and volt-free contacts for external control. Operation at the control cabinet is on the left in pressing direction, the needle unit is on the right side and can be folded backwards for transport. The baler has been partially overhauled and tested in our workshop, see photos. Documentation (operating instructions, CE declaration, electrical/hydraulic schematics) is available in German. Viewing is possible by appointment. We do not assume liability for the technical information or for any possible errors.

Sąlyga: geras (naudotas), Gamybos metai: 2011, Injection moulding machine Krauss Maffei KM 850-12000 MX With Krauss Maffei LRX 500 robot Year of manufacture: 2011 Machine description: Hydraulic-mechanical two-platen clamping system with 4 pressure pads and 4 locking units on the moving platen. PV-controlled injection unit. MC 5 control system with colour monitor, integrated control panel, and USB data storage. Plasticizing unit: Complete plasticizing system for thermoplastics with a 135 mm diameter screw, shut-off nozzle, and open nozzle. Nozzle radius: 25 mm, nozzle orifice: 9 mm Hodpjw Rdlqofx Acuefn Technical data: Clamping unit: Clamping force: 8,500 kN Mould opening force: 560 kN Platen size (H x V): 1600 x 1600 mm Tie bar spacing (H x V): 1140 x 1140 mm Mould opening stroke: 1600 mm Mould height (min-max): 500 - 1100 mm Daylight opening: 2100 mm Ejector stroke: 300 mm Ejector force: 200 / 100 kN Injection unit: Screw diameter: 135 mm Injection pressure: 1389 bar Injection volume: 8588 cm³ Shot weight (PS): 6098 g Injection speed: 1414 cm³/s Electro-hydraulic equipment: Pump motor power: 132 kW Dry cycle time (Euromap 6): 965 cycles/h Oil tank capacity: 2440 l Dimensions and weight: Net weight with control cabinet: 49 t Footprint (L x W x H): 11.72 x 2.92 x 2.71 m

Sąlyga: naudotas, Gamybos metai: 2005, veikimo valandos: 16 304 h, Balių presas HSM VK 4012, pagaminimo metai 2005 - Pakeliui Gamintojas: HSM Tipas: VK 4012 Pagaminimo metai: 2005 Darbo valandos: 16 304 Presavimo jėga: 45 t Variklio galia: 15 kW Užpildymo anga: 820 x 1250 mm (PxI) Hodpfx Acew Tilnousfn Talpa: 50 kg/m³: 8,7 t/val Balos dydis: 900 x 720 x 600-1200 mm Balos svoris: 250-400 kg Suraišiojimas: 3 kartus, automatinis Transportavimo matmenys: apie 7 200 x 2 300 x 2 400 mm (IxPxA) Svoris: apie 8 000 kg Medžiagos: popierius, kartonas, plėvelė

Sąlyga: geras (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, Clamping force: 1250 kN Screw diameter: 35 mm Tie bar spacing: 470 mm Shot weight: 142 g Hsdpfx Acjwthfusujfn Minimum mould height: 300 mm Total weight: approx. 6,000 kg

Sąlyga: naudotas, mašinos/transporto priemonės numeris: M11643*18226, Gamybos metai: 2018, veikimo valandos: 17 465 h, keliamoji galia: 20 000 kg, kėlimo aukštis: 6 500 mm, laisvas kėlimas: 3 250 mm, stiebo tipas: dupleksas, statybinis aukštis: 5 060 mm, galia: 185 kW (251,53 AG), tuščias svoris: 38 500 kg, pavaros tipas: Diesel, statybos plotis: 3 000 mm, Empty container handler Chassis number: M11643*18226 Hjdeuh A R Dopfx Acuofn Load center: 1200 mm ISO class: Terminal West Mast type: Duplex Transmission: ZF-WG191 Condition: Operational and fully functional Technical condition: Good Front tires type: Pneumatic Front tires size: 14.00-24 Front tires condition: 40–60% Rear tires type: Superelastic Rear tires size: 14.00-24 Rear tires condition: 20–40% Description: Headspreader Sideshift, fork positioner, 3rd valve, 4th valve, front work lights, heater, full cabin, Central lubrication, camera, ELME 508 headspreader, movable cabin (forks 2.40 m available)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, Techniniai duomenys Pagaminimo metai: 2007 Uždarymo pusė Uždarymo jėga: 13 000 kN Atidarymo eiga / didžiausias montavimo aukštis: 2 300 mm Didžiausias tvirtinimo plokščių atstumas: 4 000 mm Formos įstatymo aukštis min./maks.: 1 000 - 1 700 mm Didžiausias tvirtinimo plokštės aukštis: 1 910 mm Mažiausias formos dydis: 1 020 x 820 mm Laisvas tarpas tarp kolonų: 1 500 mm Antgalio spindulys: R40 mm Formos svoris: 29 000 kg Išstūmiklio eiga: 350 mm 1. Įpurškimo pusė Sraigto skersmuo: 120 mm Tūris vienam judesiui: 6 786 ccm 2. Įpurškimo pusė Sraigto skersmuo: 105 mm Tūris vienam judesiui: 5 195 ccm Hedpfx Ajw Rfkhecuefn NC5 valdymas Šerdžių ištraukėjai AWS/DS: 1/1

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, Krauss Maffei Injection Moulding Machine KM 800 – 12000 MX Year of manufacture: 2007 Clamping Unit: - Clamping force: 8,000 kN - Mold opening force: 560 kN - Platen dimensions (H x V): 1,600 x 1,530 mm - Tie bar clearance (H x V): 1,120 x 1,000 mm - Mold opening stroke: 1,600 mm - Mold height (min - max): 500–1,100 mm - Platen movement stroke: 2,100 mm - Ejector stroke: 300 mm - Ejector force: 200/100 kN Injection Unit: - Screw diameter: 135 mm - Injection pressure: 1,389 bar Hfodpfsvcpdrex Acujn - Injection volume: 8,588 cm³ - Shot weight for PS: 6,098 g - Screw rotation speed (standard/option): 121/153 rpm - Injection output (standard) Electrical and Hydraulic Equipment: - Rated pump motor power: 110 kW - Installed heating power: 57 kW - Number of heating zones (barrel): 7 - Dry cycle speed according to Euromap: 965 1/h - Hydraulic tank capacity: 1,500 l Dimensions and Weight: - Net weight with control cabinet: 45 t - Machine dimensions (L x W x H): 10.81 x 2.92 x 2.51 m

Sąlyga: geras (naudotas), VT 5041-21/3-OD Hjdpou Ilmksfx Acusfn

Gamybos metai: 2022, Sąlyga: paruoštas naudoti (naudotas), An as-new injection moulding machine including robot is available. 1) Injection moulding machine Krauss Maffei, year of manufacture: 2022, clamping system: hydromechanical two-platen clamping system. Plasticising unit: 8100, screw diameter: 105 mm, nozzle radius: 35 mm, nozzle bore: 6 mm, clamping force: 1700 t, control unit: MC6. 2) Industrial robot Kuka IR 1200 R3100.2 F/K, max. payload: 120 kg, reach: 3100 mm, repeatability: +/-0.05 mm, controller: KR C5. Documentation available. Inspection on site is possible. Hjdpevpvlcjfx Acuofn

Sąlyga: naudotas, Gamybos metai: 2007, veikimo valandos: 3 960 h, keliamoji galia: 16 000 kg, kėlimo aukštis: 4 000 mm, stiebo tipas: standartas, statybinis aukštis: 3 645 mm, galia: 147 kW (199,86 AG), šakių laikiklio plotis: 2 550 mm, šakių ilgis: 2 400 mm, tuščias svoris: 22 000 kg, bendras ilgis: 5 455 mm, pavaros tipas: Diesel, statybos plotis: 2 550 mm, Diesel forklift Load center: 1200 Fork width: 250 mm Fork thickness: 85 mm Mast type: standard Condition: Ready for use and fully functional Technical condition: Good Front tires type: Pneumatic Front tires condition: 60 - 80% Rear tires type: Pneumatic Rear tires condition: 60 - 80% Description: Maintenance including drive and engine oil renewed. Safety inspection (UVV) renewed. Side shifter, fork positioner, Side shifter and fork positioner integrated in carriage. Fork positioner range inside to inside: 700-2394 mm 3rd valve, 4th valve, rear working lights, front working lights, heater, full cabin, CE certificate, twin tires, windshield wiper, seat, Hfedpfx Acjruxlvjuon

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 6903*11962, Gamybos metai: 2006, veikimo valandos: 16 650 h, keliamoji galia: 15 000 kg, kėlimo aukštis: 5 500 mm, kuro tipas: dyzelinas, stiebo tipas: standartas, statybinis aukštis: 4 400 mm, galia: 147 kW (199,86 AG), šakių ilgis: 2 600 mm, tuščias svoris: 21 900 kg, pavaros tipas: Diesel, Heavy-duty forklift – diesel Hsdjuh Aq Rjpfx Acujfn Chassis number: 6903*11962 Load centre: 1200 mm Fork width: 240 mm Fork thickness: 85 mm Mast type: Standard Transmission: Dana 340FTE17310-20 Technical condition: Fair Front tire type: Pneumatic Front tire size: 12.00-20 Front tire condition: 60–80% Rear tire type: Pneumatic Rear tire size: 12.00-20 Rear tire condition: 80–100% 3rd valve, 4th valve, full cabin,

Sąlyga: naujas, Gamybos metai: 2012, Schaltschrank für elektrische Energieübertragung, Elektroverteilungsschrank, Elektroschrank 180,5 kW, AEG Thyristor, AEG Thyro-A, 2A 400-350 HFRL1, Thyristorumrichter, Leistungsregler, Schaltschrank zur Energieübertragung für Ofen, Gebrauchtmaschine Hfjdpfx Aorbzygocujn Hersteller: Amarc srl Typ: 120254; 3057 Baujahr: 2012 Abmessungen: 1020 x 530 x 2130 mm Gewicht: 200 kg Schaltschrank: 400 V; 3-Phasen; 50 Hz; 262 A; 180,5 kW Energieübertragungssystem AEG Thyro-A 2A 400-350 HFRL1 (Thyristor) AEG Thyro-A: Thyristor 400 V 350 A Gekühlt Leistungsregler Lastüberwachung an den analogen Ausgängen

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, Krauss Maffei Injection Moulding Machine KM 120-380 PX Year of manufacture: 2023 Fully electric machine Five-point double toggle lever clamping mechanism (three-plate unit) with servo-electric drive. Injection unit with servo-electric drive for injection and plasticising, and servo-hydraulic drive for the movement of the entire injection unit. MC6 control system based on an industrial PC with real-time Ethernet technology Plasticising system Complete plasticising unit for thermoplastics with an HPS-M screw, diameter 40 mm Nozzle radius 10mm, nozzle orifice 4mm MACHINE TECHNICAL DATA Clamping unit - Clamping force: 1,200 kN - Mould opening force: 180 kN - Platen dimensions (h x v): 640 x 590 mm - Tie-bar spacing (h x v): 470 x 420 mm - Mould opening stroke: 400 mm - Mould height min.-max. with option 45.468: 180 - 550 mm - Daylight with option 45.468: 950 mm - Ejector stroke: 175 mm - Ejector force forward/backward: 22 / 10 kN - Ejector speed: 350 mm/s Injection unit - Screw diameter: 40 mm - Ls/D ratio: 20 - Injection pressure: 1,860 bar - Injection volume: 201 cm³ - Shot weight 1): 183 g - Injection speed: 125 mm/s - Injection capacity: 157 cm³/s - Screw speed: 334 rpm - Plasticising rate 1): 24.7 g/s - Torque: 337 Nm - Nozzle contact force: 34 kN Electrical parameters - Connected load: 13.8 kW - Fuse: 63 A - Installed heater power: 11.5 kW - Number of heating zones (cylinder): 5 - Dry cycle time / stroke according to Euromap 6 2): 1.5 s / 329 mm - Oil tank capacity: 120 l Weight and dimensions - Net weight with control cabinet: 6.9 t Hedpfovgdumox Acuefn - Machine dimensions (L x W x H) 3): 5.3 x 1.60 x 1.88 m

Sąlyga: geras (naudotas), Gamybos metai: 2011, veikimo valandos: 20 580 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 48 t, pildymo angos plotis: 1 020 mm, pildymo angos ilgis: 1 250 mm, kamuolio ilgis: 1 200 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 450 kg, įėjimo srovė: 59 A, bendras svoris: 12 000 kg, transporto aukštis: 2 750 mm, alyvos bako talpa: 300 l, galia: 30 kW (40,79 AG), transporto plotis: 2 300 mm, transporto ilgis: 8 500 mm, bakelio talpa: 300 l, Good day, We hereby offer you, subject to prior sale, a used baling press manufactured by HSM, type VK 4812. The following technical data is taken from the manufacturer's operating manual and brochures; we cannot guarantee the accuracy or completeness of this information. Manufacturer: HSM Type: VK 4812 Year of manufacture: 2011 Operating hours: 20,580 hours Pressing force (main press): 48 t Drive power: 30 kW Machine weight (press): 12 t The machine documentation is available in German. An inspection is possible by appointment at our workshop. We would be pleased if this machine is of interest to you. Hfodpfx Ast H Rcaocuon Your service team at Mertens & Frowein GmbH

Gamybos metai: 2002, Sąlyga: paruoštas naudoti (naudotas), A large-format injection molding machine Krauss-Maffei without robot, conveying equipment, safety enclosure, and attachments is available. Clamping force: 1300t, injection volume: approx. 8000 cm³. Overall system dimensions (L/W/H): approx. 13,000 mm / 3,550 mm / 2,850 mm, machine weight: approx. 83,000 kg, operating hours: 73,259 h, production hours: 57,753 h. Documentation is available. On-site inspection is possible. Expected availability from Q1/2026. Hjdpfx Aewut Hyecusfn

Gamybos metai: 2018, veikimo valandos: 17 465 h, Sąlyga: naudotas, galia: 185 kW (251,53 AG), tuščias svoris: 39 600 kg, kėlimo aukštis: 6 500 mm, laisvas kėlimas: 3 250 mm, stiebo tipas: dupleksas, statybinis aukštis: 5 060 mm, šakių ilgis: 2 400 mm, pavaros tipas: Diesel, keliamoji galia: 20 000 kg, statybos plotis: 3 000 mm, mašinos/transporto priemonės numeris: M11643*18226, Heavy Duty Forklift - Diesel Chassis number: M11643*18226 Load center: 1200 mm ISO class: Terminal West Mast type: Duplex Transmission: ZF-WG191 Condition: Ready for operation and fully functional Technical condition: Good Front tires type: Pneumatic Front tyres size: 14.00-24 Front tires condition: 40 - 60% Rear tires type: Superelastic Rear tyres size: 14.00-24 Hfjdpfx Aceuh Atljujn Rear tires condition: 20 - 40% Description: Headspreader available Side shifter, fork positioner, 3rd valve, 4th valve, front work lights, heater, full cab, central lubrication, camera, movable cabin (ELME 508 headspreader available)

Sąlyga: naujas, Gamybos metai: 2012, Rozdzielnica zasilania elektrycznego, Szafa rozdzielcza elektryczna, Szafa elektryczna 600 kW, AEG Tyrystor, AEG Thyro-A, 2A 400-495 HFRL1, Przemiennik tyrystorowy, Regulator mocy, Szafa zasilająca do pieca, Maszyna używana Hedporby Uvofx Acusfn Producent: Amarc srl Typ: 120254; 3058 Rok: 2012 Wymiary: 1800 x 515 x 2130 mm Waga: 400 kg Szafa: 400 V; 3-fazowa; 50 Hz; 868 A; 600 kW System przesyłu i rozdziału mocy AEG Thyro-A 2A 400-495 HFRL1 (tyrystor) AEG Thyro-A: Tyrystor 400 V 495 A Chłodzony Regulator mocy Nadzór obciążenia na wyjściach analogowych

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, Krauss Maffei Injection Moulding Machine KM 800 – 12000 MX Year of manufacture: 2006 Clamping Unit: - Clamping force: 8,000 kN - Mold opening force: 560 kN - Platen dimensions (H x V): 1,600 x 1,530 mm - Tie bar clearance (H x V): 1,120 x 1,000 mm - Maximum mold opening stroke: 1,600 mm - Mold height (min - max): 500–1,100 mm - Max platen stroke: 2,100 mm - Ejector stroke: 300 mm - Ejector force: 200/100 kN Hjdpfxjtmq Ako Acuofn Injection Unit: - Screw diameter: 135 mm - Injection pressure: 1,389 bar - Injection volume: 8,588 cm³ - Shot weight for PS: 6,098 g - Screw speed, standard/option: 121/153 rpm - Injection output (standard) Electrical & Hydraulic Equipment: - Pump motor power: 110 kW - Installed heater capacity: 57 kW - Number of barrel heating zones: 7 - Dry cycle time (Euromap): 965 cycles/h - Hydraulic oil tank capacity: 1,500 l Dimensions & Weight: - Net weight with control cabinet: 45 t - Machine dimensions (L x W x H): 10.81 x 2.92 x 2.51 m

Gamybos metai: 2000, Sąlyga: paruoštas naudoti (naudotas), Two Krauss Maffei injection moulding machines available: 1) Krauss Maffei KM 50 C1, year of manufacture: 1999, injection unit: SP220, screw diameter: 30mm, L/D ratio: 23, injection pressure: 2500bar, shot volume: 85cm³, machine dimensions (L/W/H): approx. 3200mm/1350mm/1800mm, weight: approx. 2500kg, control system: MC4, operating hours: approx. 86,000h. 2) Krauss Maffei KM 125 C1, year of manufacture: 2000, injection unit: SP520, screw diameter: 45mm, L/D ratio: 20, injection pressure: 1878bar, shot volume: 217cm³, machine dimensions (L/W/H): approx. 4500mm/1550mm/2200mm, weight: approx. 5500kg, control system: MC4, operating hours: approx. 82,000h. Documentation available. Inspection on site possible. Hodpfxow Emybs Acujfn

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2011, Krauss Maffei KM 850-12000 MX Injection Moulding Machine Year of manufacture: 2011 LRX 500 Robot Z-axis: 4000 mm X-axis: 1500 mm Y-axis: 1250/1250 mm Hydraulic-mechanical two-platen clamping system with 4 pressure pads and 4 locking units on the moving platen. PV - injection unit regulation. MC 5 control system with colour monitor, integrated operator panel, and USB data carrier. Plasticising unit: Complete plasticising unit for thermoplastics with a 135 mm screw diameter, non-return valve and open nozzle. Nozzle radius: 25 mm, nozzle opening: 9 mm TECHNICAL DATA Clamping unit: - Clamping force: kN 8500 - Mold opening force: kN 560 - Platen dimensions (H x V): mm 1600 x 1600 - Tie bar clearance (H x V): mm 1140 x 1140 - Mold opening stroke: mm 1600 - Mold height (min–max): mm 500 - 1100 - Daylight: mm 2100 - Ejector stroke: mm 300 - Ejector force: kN 200 / 100 Injection unit: - Screw diameter: mm 135 - Injection pressure: bar 1389 - Shot volume: cm³ 8588 - Shot weight for PS: g 6098 - Injection rate: cm³/s 1414 Electro-hydraulic equipment: - Rated pump motor power: kW 132 - Dry cycle time according to Euromap 6: 1/h 965 - Oil tank capacity: l 2440 Weights and dimensions: - Net weight with control cabinet: t 49 - Installation space (L x W x H): m 11.72 x 2.92 x 2.71 Hfjdpfx Acswqdyisusn

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2004, Krauss Maffei KM 2300 - 12000 MC Injection Moulding Machine Year: 2004 Control system: MC 4 Operating hours: 93,900 Clamping unit Clamping force: 23,000 kN Max. mould opening force: 1,420 kN Moving platen slide force Opening: 227 kN Moving platen slide force Closing: 203 kN Mould platen size (h x v): 2,830 mm x 2,400 mm Tie bar spacing (h x v): 2,000 mm x 1,600 mm Mould opening stroke: 2,600 mm Min. mould height: 1,100 mm Max. mould height: 1,800 mm Max. daylight: 3,700 mm Hydraulic ejector - stroke: 350 mm Ejector force forward/backward: 415/115 kN Injection unit Screw diameter: 135 mm Ls/D ratio: 23 Injection pressure: 1,389 bar Shot volume: 8,588 ccm Injection weight, PS: 7,815 g Injection rate: 1,019 ccm/s Screw speed: 113 rpm Max. plasticizing rate: 191 g/s Nozzle pressure: 241 kN Electrical and hydraulic equipment Rated pump motor power: 132 kW Installed heating capacity: 997 kW Adjustable barrel heating zones: 7 Drying cycles per hour: 350 Tank capacity: 2,500 l Dimensions and weight Hfodewq Ed Aopfx Acuon Machine dimensions: 15.15 m x 4.15 m x 3.29 m Total machine weight: 143,000 kg Max. mould weight: 62,000 kg LRX 1000 Robot X axis - 2,000 mm Y axis - 3,000 mm Z axis - 5,000 mm

Sąlyga: geras (naudotas), Gamybos metai: 2011, Krauss Maffei Injection Moulding Machine KM 850-12000 MX With Krauss Maffei Robot Year of manufacture: 2011 Hydraulic-mechanical two-platen clamping system with 4 pressure pads and 4 locking units on the moving platen. PV - Injection unit control. MC 5 control system with colour monitor, integrated control panel and USB data carrier. Plasticizing unit Complete plasticizing unit for thermoplastics with 135 mm screw diameter, shut-off valve, and open nozzle. Nozzle radius: 25 mm, nozzle opening: 9 mm Hodpfx Acstrya Reuefn TECHNICAL DATA Clamping unit - Clamping force: 8,500 kN - Opening force: 560 kN - Platen dimensions (H x V): 1,600 x 1,600 mm - Tie bar spacing (H x V): 1,140 x 1,140 mm - Maximum opening stroke: 1,600 mm - Mould height (min-max): 500 - 1,100 mm - Daylight: 2,100 mm - Ejector stroke: 300 mm - Ejector force: 200 / 100 kN Injection unit - Screw diameter: 135 mm - Injection pressure: 1,389 bar - Injection volume: 8,588 cm³ - Injection weight for PS: 6,098 g - Injection rate: 1,414 cm³/s Electro-hydraulic equipment - Rated motor power: 132 kW - Dry cycle time per Euromap 6: 965 cycles/h - Oil tank capacity: 2,440 l Weight and dimensions - Net weight with control cabinet: 49 t - Footprint dimensions (L x W x H): 11.72 x 2.92 x 2.71 m.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, Krauss Maffei KM 1300 – 12000 MX Injection Moulding Machine Year of manufacture: 2015 General description: The injection moulding machine is equipped with a fully hydraulic clamping system. Control is managed by a modern MC6 system based on an industrial computer using real-time Ethernet technology. Integrated 19-inch control panel with colour touchscreen, LED backlighting, and graphical visualisation of all active processes via ProcessDesigner software. Plasticising unit: Complete unit for thermoplastics Wear-resistant (abrasive) version Screw diameter: 120 mm Non-return valve Open nozzle Technical data: Clamping unit: Clamping force: 13,000 kN Mould opening force: 910 kN Platen dimensions (h × v): 2210 × 1910 mm Distance between tie bars (h × v): 1570 × 1270 mm Ejector stroke: 350 mm Hedowyxlropfx Acujfn Ejector force (forward / backward): 250 / 125 kN Injection unit: Screw diameter: 120 mm Injection pressure: 1758 bar Injection volume: 6786 cm³ Shot weight (for PS): 6175 g Injection rate: 1117 cm³/s Screw speed (standard/option): 103 / 145 rpm Plasticising capacity for PS: At standard speed: 174 g/s At increased speed (option): 246 g/s Electro-hydraulic equipment: Pump motor power: 132 kW Heater power: 82 kW Number of cylinder heating zones: 7 Dry cycle time (according to Euromap 6): 765 cycles/h Oil tank capacity: 2440 l Dimensions and weight: Net weight (with control cabinet): 70 t Dimensions (L × W × H): 13.03 × 3.65 × 2.82 m

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2011, Krauss Maffei Injection Moulding Machine KM 850-12000 MX With Krauss Maffei Robot LRX 500 Year of manufacture: 2011 Hydraulic-mechanical two-plate clamping system with 4 pressure pads and 4 locking units on the moving platen. PV – injection unit control. MC 5 control system with color monitor, integrated control panel, and USB data carrier. Plasticizing Unit Complete plasticizing unit for thermoplastics with 135 mm screw diameter, with non-return valve and open nozzle. Nozzle radius: 25 mm, nozzle opening: 9 mm TECHNICAL DATA Clamping Unit - Clamping force: kN 8500 - Mold opening force: kN 560 - Platen dimensions (H x V): mm 1600 x 1600 - Distance between tie-bars (H x V): mm 1140 x 1140 - Mold opening stroke: mm 1600 - Mold height (min-max): mm 500 – 1100 - Opening width: mm 2100 - Ejector stroke: mm 300 - Ejector force: kN 200 / 100 Injection Unit - Screw diameter: mm 135 Hfedpfx Aswkhmmecuen - Injection pressure: bar 1389 - Shot volume: cm³ 8588 - Shot weight for PS: g 6098 - Injection rate: cm³/s 1414 Electro-hydraulic Equipment - Rated pump motor power: kW 132 - Dry cycle time (Euromap 6): 1/h 965 - Hydraulic oil tank capacity: l 2440 Weight and Dimensions - Net weight with control cabinet: t 49 - Footprint dimensions (L x W x H): m 11.72 x 2.92 x 2.71