Agi pirkti naudotą (2 058)

Gamybos metai: 2025, Sąlyga: naujas, Parts Cleaning System, Spray Cleaning Machine Type L90 Automatically operating hot water parts washer with automatic basket drive via geared motor, stainless steel wash pump (make: Lowara), circulating 3-sided spray system (from below, side, and above) with stainless steel nozzles - Basket diameter: 790 mm - Useful height: 500 mm - Max. load weight: 150 kg - Spray pressure: 3 bar - Tank volume: 105 liters - Heating: electrically adjustable (room temp. – 90°C) Machine dimensions (LxWxH): 1,150 x 1,250 x 1,900 mm Empty weight: approx. 220 kg Washing cycle timer adjustable via Omron timer (minutes and hours) Complete cleaning system (interior and exterior cladding) made from stainless steel 1.4301 Water circulation system and loading basket made from stainless steel 1.4301 Full system insulation (tank and cabin) made from stainless steel 1.4301 Mechanical lid locking Bath cover with fine filter (2,000 micron) Suction filter for pump protection Operating hours counter Steam extraction including condensate return Prepared for later installation of an oil separator The parts washer is as new, never used. Kedpfx Aehgh I Sjf Ijwt OTHER BASKET DIMENSIONS AVAILABLE ON REQUEST!!!

Gamybos metai: 2025, Sąlyga: naujas, Parts Cleaning Machine, Spray Cleaning System Type L800FP Fully automatic hot water parts washing machine with basket drive powered by gear motor, housing made of stainless steel 1.4301, piping and rotary basket galvanized steel, special nozzle system with stainless steel flat jet nozzles, wash pump made of stainless steel (manufacturer: Xylem/Lowara), level control for dry-run protection, - Basket diameter: 780 mm - Effective height: 500 mm Kwodpfefzblqex Af Ijt - Max. load capacity: 150 kg - Spray pressure: 3 bar - Tank volume: 120 liters - Heating: electrically adjustable (room temperature up to 60°C) System dimensions (LxWxH): 1,160 x 1,200 x 1,750 mm Suction filter for pump protection Delivery: ex works, FCA

Gamybos metai: 2025, Sąlyga: naujas, Parts Cleaning Machine, Spray Cleaning System Type L901FP Fully automatic hot-water parts washer with basket drive powered by geared motor. The housing of the unit is made of stainless steel 1.4301; all piping and rotating basket are zinc-plated steel. Special nozzle system equipped with stainless steel flat spray nozzles. Washing pump made of stainless steel (manufacturer: Xylem/Lowara). Level control for dry-running protection. - Basket diameter: 910 mm - Usable height: 520 mm Kwsdpfxjfl Ufze Af Iet - Max. load weight: 150 kg - Spray pressure: 3 bar - Tank capacity: 190 liters - Heating: electrically adjustable (ambient temp. to 60°C) System dimensions (LxWxH): 1,300 x 1,350 x 1,990 mm Suction filter for pump protection Delivery: ex works, FCA

Sąlyga: geras (naudotas), Gamybos metai: 2004, Mașina este într-o stare foarte bună. Piesele prezentate manual nu sunt incluse. Kwjdpfx Afovkuqts Iot

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 350 mm, Y ašies eiga: 250 mm, Z ašies eigos atstumas: 256 mm, AGIECUT Progress V2 Year of manufacture: 2007 Travel paths: X = 350 mm, Y = 250 mm, Z = 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 kg (submerged) / 450 kg (non-submerged) Achievable surface quality: Ra: 0.20 µm Kodex Uxglopfx Af Iowt Maximum cutting speed: 500 mm²/min Glass scales on X and Y axes for increased precision Available wire diameters: 0.20 – 0.33 mm Submerged wire EDM with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Including AGIEJOGGER handbox for convenient machine setup AGIE IPG generator with power module AGIEVISION CNC control Dimensions (L x W x H): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and fully overhauled upon receipt of order. Afterwards, a test cut with the finest surface quality is performed for acceptance. You receive a 6-month warranty on the machine. Commissioning and on-site training can be offered upon request.

Sąlyga: naudotas, Tool holder, milling adaptor, milling cutter, cutter head Kwjdpfx Afefnbyne Iot - Chuck type: SK50, 5 pieces - Sizes: see pictures - Price: for the complete set - Box dimensions: 400/300/H270 mm - Weight: 42.1 kg

Sąlyga: naudotas, Gamybos metai: 2023, valdiklių gamintojas: Heidenhain, valdiklio modelis: TNC 640, Aprašymas: Bendra informacija: Metai: 2023 Valdymas: Heidenhain TNC 640 Sukimosi greitis: 15 000 aps./min Įrankio tvirtinimas: HSK 63 Stalo eigės kryptys X/Y/Z: 1 550/650/550 mm Velenas: Technologija: Inline tiesioginė pavara Sukimosi greitis: 15 000 aps./min Galia: 17 kW Įrankio tvirtinimas: HSK 63 NC sukamasis-šlifuojamasis stalas: B ašis: +/- 110° C ašis: 360° Tvirtinimo paviršius: 600 mm Maks. stalo apkrova: 500 kg Fiksuotas stalas: Tvirtinimo paviršius: 800 x 800 mm Maks. stalo apkrova: 1 000 kg Įrankių magazinas: Technologija: Grandininė sistema Stotelių skaičius: 60 Įrankių keitiklis: dvigubas griebtuvas Maks. įrankio skersmuo: 75 (127) mm Ksdpfx Asxthp Ref Iswt Maks. įrankio ilgis: 350 mm Įranga: Atstumo matavimo sistemos: Tiesioginės (stiklo masteliai) Drožlių pašalinimas: Drožlių transporteris Aušinimo skysčio tiekimas: Vidaus aušinimo sistema, 20 bar Rušinio matavimas: belaidis matavimo jutiklis Įrankio matavimas: įrankio matavimo jutiklis Užstatymo režimas: Elektroninis rankenėlė

Sąlyga: naudotas, Gamybos metai: 1973, Press force: 110 t Bending length: 3100 mm Distance between uprights: 2600 mm Kjdpfxow A An Nj Af Iowt Stroke: 150 mm Installation height: 350 mm Working height: 900 mm Total power requirement: 22 kW Machine weight approx.: 7700 kg Space requirement approx.: 3550 x 1800 x 2600 mm Equipment: - Electric backgauge (X-axis) - Electric depth adjustment (Y1 + Y2 axes) - 2 front support arms - Two-hand operation - Side safety guards - Tools

Sąlyga: naudotas, Gamybos metai: 1976, Sheet width: 3000 mm Sheet thickness: 6 mm Strokes per minute: 18 Cutting angle: 1°30′ Throat depth: 300 mm Backgauge (adjustable): 750 mm Total power requirement: 11 kW Ksdpfxowyxxre Af Iowt Machine weight approx.: 6.5 t Space requirement approx.: 3.9 x 2.2 x 1.85 m Equipment: - Electro-hydraulic guillotine shear - Electric backgauge 1000 mm - Piece counter - With analogue position display - Manual blade gap adjustment - Manual cutting angle adjustment - 4 support arms - Sheet metal chute - Spare blade - Front finger guard - Foot switch

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, The Table Top Print pouch packer enables efficient packaging and sealing of products in pre-made pouches and is suitable for various formats. The machine is easy to operate and features a user-friendly display for setting up jobs, storing them, and controlling operating parameters. For greater flexibility, it offers automatic and manual operating modes with a secure sealing bar. Operator training for a packaging employee takes less than five minutes. With integrated thermal transfer printing technology, pouches can be directly marked with high-resolution graphics, text, and barcodes, eliminating the need for separate labeling. Features - Multicolor display for easy adjustment - Pre-set product packaging quantity - Integrated total product counter (with reset option) - Roll change in under one minute - Sealing via foot switch, automatic, or manual activation - Feed units for automatic pouch filling available on request Technical specifications 1. Maximum pouch length: 450mm 2. Maximum pouch width: 250mm 3. Maximum pouch thickness: 0.04-0.1mm per layer 4. Packaging speed: up to 25 units/minute 5. Supply voltage: 1Ph. 220V 50Hz 6. Total power: approx. 1 kW 7. Machine weight: approx. 70 kg (including printer) 8. Machine dimensions: approx. 670x665x860 mm 9. Print area: 53x75mm 10. Pouch type: chain pouches on rolls Base machine €12,500 Ksdpfjxlzr Asx Af Ijwt + Thermal transfer printer +€5,500 + Label dispenser +€2,900 + SATO label printer incl. dispenser +€6,500 to €9,000

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Carton Erector Advanced 400 Fully Automatic Net Price: €24,500 Machine Features 1. Modern design with robotic arm 2. Active servo-controlled 90⁰ carton folding 3. Single magazine carton feed 4. Bottom sealing with adhesive tape 5. Five servo drive units 6. Steel construction 7. HMI control panel 8. Standard operating direction left to right, available for both directions 9. Documentation in the local language Technical Specifications 1. Product length: L145-400 mm (up to 650 mm on request) 2. Product width: W80-350 mm (up to 500 mm on request) 3. Product height: H150-350 mm (up to 500 mm on request) Kjdpfeya Dh Dex Af Iowt 4. Packaging speed: 5-30 cartons/min 5. Max adhesive tape width: max 48 mm (other options on request) 6. Power supply: 1Ph. 220V 50Hz 7. Power consumption: approx. 2.1 kW 8. Machine weight: approx. 620 kg 9. Machine dimensions: approx. 2450 x 1380 mm 10. Air consumption depends on speed Carton Erector Advanced 500 Fully Automatic Net Price: €27,500 Machine Features 1. Modern design with robotic arm 2. Active servo-controlled 90⁰ carton folding 3. Single magazine carton feed 4. Bottom sealing with adhesive tape 5. Five servo drive units 6. Steel construction 7. HMI control panel 8. Standard operating direction left to right, available for both directions 9. Documentation in the local language Technical Specifications 1. Product length: L275-500 mm (up to 650 mm on request) 2. Product width: W140-400 mm (up to 500 mm on request) 3. Product height: H140-400 mm (up to 500 mm on request) 4. Packaging speed: 5-30 cartons/min 5. Max adhesive tape width: max 58 mm (other options on request) 6. Power supply: 1Ph. 220V 50Hz 7. Power consumption: approx. 2.1 kW 8. Machine weight: approx. 620 kg 9. Machine dimensions: approx. 2850 x 2000 x 1400 mm 10. Air consumption depends on speed Carton Erector Advanced 650 Fully Automatic Net Price: €29,900 Machine Features 1. Modern design with robotic arm 2. Active servo-controlled 90⁰ carton folding 3. Single magazine carton feed 4. Bottom sealing with adhesive tape 5. Five servo drive units 6. Steel construction 7. HMI control panel 8. Standard operating direction left to right, available for both directions 9. Documentation in the local language Technical Specifications 1. Product length: L285-650 mm 2. Product width: W280-500 mm 3. Product height: H150-500 mm 4. Packaging speed: 5-25 cartons/min 5. Max adhesive tape width: max 75 mm 6. Power supply: 1Ph. 220V 50Hz 7. Power consumption: approx. 2.35 kW 8. Machine weight: approx. 620 kg 9. Machine dimensions: approx. 2920 x 2100 x 1500 mm 10. Air consumption depends on speed

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Savybės - paprastas valdymas ir valymas - patogus valdymas per spalvotą lietimui jautrų ekraną Kodpfx Afeya Ahvo Iswt - atmintis skirtingiems svėrimo receptams - tikslūs svėrimo rezultatai dėl trijų pakopų svėrimo (rupus/vidutinis/smulkus), kiekviena pakopa atskirai programuojama - formato keitimas be įrankių Techniniai duomenys - Svėrimo diapazonas: 20 g – 4000 g - Tikslumas: iki 0,5 g, priklausomai nuo produkto - Svėrimo talpa: 6 litrai - Maksimalus greitis: 60 svėrimų per minutę - Svoris: 240 kg - Medžiaga: nerūdijantis plienas 304 - Pajungimas: 220V / 50Hz / 6A

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Linear Weigher: Gentle and Precise Filling Technology Our linear weigher is the ideal solution for simple and precise dosing and filling of products. It combines accuracy with a gentle handling process. Thanks to the minimal drop height, product damage is effectively avoided, ensuring the quality of your goods—even with sensitive products. Flexible and Efficient Operating Principle At the core of our technology lies a simple yet highly effective functional principle: Products are transported via linear conveyors or vibratory feeders and precisely dosed into weighing hoppers. Features: - Easy operation and cleaning - Convenient control via color touchscreen - Memory for various weighing recipes - Precise weighing results thanks to three-stage weighing (coarse / medium / fine), individually programmable - Tool-free format changeover - Intuitive design enables quick conversion and easy cleaning - Gentle product handling—minimal drop height protects sensitive and fragile products - Versatile use in both food and non-food sectors - Accurate dosing ensures consistent product quality - Robust and hygienic components made from stainless steel 304, easy to clean - Compact design and durable construction save space and reduce maintenance requirements Kwedpsyazywjfx Af Iot With our linear weigher, you receive a reliable, precise, and hygienic solution that makes your production process more efficient. Technical Data - Weighing range: 20g to 2000g - Accuracy: up to 1g, depending on product - 4.5-liter weighing hopper - Max. speed: 30 weighings/minute (2-head weigher) - Material: Stainless steel 304 (V4A / 316 upon request) - Power supply: 220V / 50Hz / 6A

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, ruošinio svoris (maks.): 800 kg, X ašies eiga: 500 mm, Y ašies eiga: 350 mm, Z ašies eigos atstumas: 426 mm, ruošinio aukštis (maks.): 420 mm, ruošinio plotis (maks.): 650 mm, ruošinio ilgis (maks.): 1 050 mm, GF AgieCharmilles Progress VP3 Pagaminimo metai: 2011 Ašies eiga: X = 500 mm, Y = 350 mm, Z = 426 mm U/V ašių eiga: +/- 70 mm Didžiausias kūgiškumas: 30° prie 100 mm aukščio Didžiausi apdirbamo ruošinio matmenys: 1050 x 650 x 420 mm Didžiausias ruošinio svoris: 400 kg (su vonia) / 800 kg (be vonios) Pasiekiama paviršiaus kokybė: Ra: 0,20 µm Didžiausias pjovimo greitis: 500 mm²/min Galimi vielos skersmenys: 0,15 – 0,33 mm Vandens vonios staklės su automatiniu vielos įvėrimu ir automatiniu įvedimu po vielos nutrūkimo Su rankiniu priekiniu durų (prieinama iš vienos pusės) Įeina AGIEJOGGER valdymo pultas patogiam darbo paruošimui AGIE IPG-V generatorius AGIEVISION 5 valdymo sistema Matmenys (ilgis x plotis x aukštis): 1940 x 2300 x 2600 mm Kodex Sxa Topfx Af Iewt Grynas svoris: 3460 kg Įrenginys bus išvalytas ir pilnai atnaujintas pagal užsakymą. Suteikiama 6 mėnesių garantija visoms staklių dalims. Taip pat siūlome paleidimo ir operatorių mokymo paslaugas.

Gamybos metai: 2008, Sąlyga: visiškai atnaujintas (naudotas), AGIECUT Challenge V3, Year of manufacture: 2008 Travel ranges: X= 500 mm, Y= 350 mm, Z= 256 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.2 µm Available wire diameters: 0.10 – 0.33 mm Submerged wire EDM machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Including AGIEJOGGER hand box for convenient setup Including AGIESETUP 3D AGIEVISION 5 CNC control Kwodpfsm Amf Dsx Af Ist AGIE IPG-V generator Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine is cleaned, overhauled, and thoroughly tested by us after order receipt. Including operator training at Techma on your refurbished machine Optional: Transport, commissioning, training, chiller

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, The system was used for slightly moist and sticky pipe tobacco. It can therefore be used for all free-flowing products, such as spices, nuts, seeds, gummy bears, and many other types of foodstuffs. 14-head multihead weigher with vertical form-fill-seal machine: Weigher: 14 heads, each with 1.6 L volume, 7-inch HMI, MCU control Working platform (1.9 m x 1.9 m x 1.8 m) including ladder and safety guard Z-type bucket elevator: product drop height: 3.1 m, total height 3.6 m, 1.8 L bucket volume Weighing range: 10 - 2000 g Accuracy: ±0.1 g 220V 50/60Hz 1000 W All in stainless steel (304 SS) Form-Fill-Seal machine: 120 bags/minute Bag size: W 60-200 mm, L 60-300 mm Maximum film width 420 mm with SIEMENS PLC control, SIEMENS servo motor, 3-line date coder, 120 mm bag former (optionally, we also have a 200 mm former available at extra cost), with vacuum function and air extraction for the bags Discharge conveyor for the finished product Kedpsx Avllofx Af Ijwt Overall system condition: very good (used) Year of construction: 2023, very low operating hours Functionality: fully operational The system was purchased twice at the time due to a short-term increase in product demand. Shortly afterwards, demand dropped again, so the machine is still almost completely NEW. Spare parts availability for this Chinese system is excellent and the system is extremely reliable! ALTERNATIVE to the form-fill-seal machine: We also have a dosing system for cans, allowing the machine to fill directly into cans instead of bag packaging. This feeder was custom-built by Wellmann Anlagentechnik GmbH. It can be purchased as an alternative to the form-fill-seal machine. The checkweigher shown in the picture is not included in the offer. The multihead weigher can also be purchased separately for € 24,500.

Gamybos metai: 2014, Sąlyga: paruoštas naudoti (naudotas), - NAUDOTAS - CNC ELEKTROEROZINIO APDIRBIMO STAKLĖS (DIE SINKING EDM) X AŠIES EIGA: 600 mm Y AŠIES EIGA: 400 mm Z AŠIES EIGA: 500 mm MAKS. ELEKTRODO SVORIS: 50 kg MAKS. DETALĖS SVORIS: 2000 kg MAKS. DETALĖS DYDIS: 1200 x 800 x 350 mm REZERVUARO DYDIS: 1280 x 850 x 390 mm VALDYMO BLOKAS: VISION 5 Kwedpfoh St D Hex Af Iot SVORIS: 5500 kg BENDRI MATMENYS: 1800 x 2900 x 3200 mm PRIEDAI: C AŠIS PASTABA: GALIMYBĖ PAPILDYTI ELEKTRODŲ KEITIMO MAGAZINU.

Sąlyga: naudotas, rida: 21 758 km, galia: 118 kW (160,44 AG), pirmoji registracija: 05/1983, kuro tipas: dyzelinas, bendras svoris: 9 800 kg, ašių konfigūracija: 2 ašys, spalva: raudona, pavaros tipas: mechaninis,

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2019, X ašies eiga: 600 mm, Y ašies eiga: 400 mm, Z ašies eigos atstumas: 400 mm, bendras aukštis: 2 858 mm, bendras svoris: 4 400 kg, ašių skaičius: 4, Ši 4 ašių AgieCharmilles Form E 600 EDM mašina buvo pagaminta 2019 m. Ji užtikrina tikslumą ir efektyvumą sudėtingai formų gamybai. Apsvarstykite galimybę įsigyti šią „AgieCharmilles Form E 600“ EDM mašiną. Norėdami gauti daugiau informacijos, susisiekite su mumis. Papildoma įranga • Linijinis įrankių keitiklis (LTC): 6 padėtys Mašinos privalumai Techninės mašinos privalumai • Operacinė sistema: windows įvesties įrenginiai: 17" lcd monitorius, pelė arba jutiklinis ekranas, klaviatūra ir nuotolinio valdymo pultas • Ašies greitis (x, y): 4 m/min z ašies greitis: 4 m/min • Padėties nuskaitymo tikslumas (x, y, z): 0,1 µm • Maks. Elektrodo svoris: 50 kg • Maks. Ruošinio dydis: 1000 × 700 × 400 mm • Darbinio rezervuaro matmenys (plotis × aukštis × aukštis): 1200 × 800 × 500 mm • Stalo dydis: 800 × 600 mm • Atstumas nuo grindų iki stalo paviršiaus: 900 mm • Min. /maks. Atstumas nuo stalo iki griebtuvo: 150 / 450 mm • Maitinimas: standartinė įtampa 3 × 380 v / 400 v ±10%, 50/60 hz Kwjdex D Nimspfx Af Iet Papildoma informacija C ašis (standartinė) Maks. elektrodo svoris: 25 kg Sukimosi greitis: 0–100 aps./min. Dielektrinis Bako talpa: 750 litrų Dimensions Machine Depth 2700 mm

Gamybos metai: 2012, Sąlyga: paruoštas naudoti (naudotas), Allgemeine Daten Maße (Breite): 1850 mm Maße (Tiefe): 1300 mm Maße (Höhe): 2500 mm Maschinengewicht: 1540 kg Hauptantrieb Achszahl: 3 Verfahrwege X-Achse: 350 mm Y-Achse: 250 mm Z-Achse: 250 mm Tisch Tischbelastung: 400 kg Zusätzliche Ausstattung Maximales Elektrodengewicht: 80 kg Kwjdpjx D Inbofx Af Ijt Diese 3-Achs Senkerodiermaschine AgieCharmilles CABINET FORM20 wurde im Jahr 2012 hergestellt. Sie eignet sich ideal für den präzisen Formen- und Werkzeugbau und überzeugt durch ihre robuste Leistung und Zuverlässigkeit. Wenn Sie hochwertige Senkerodierbearbeitungen suchen, ist die AgieCharmilles CABINET FORM20 Maschine, die wir zum Verkauf anbieten, eine ausgezeichnete Wahl. Kontaktieren Sie uns gerne für weitere Informationen. Anwendungsbereiche EDM (Erodieren)

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, garantijos trukmė: 12 mėnesiai, The all-rounder combines outstanding workmanship with a wide range of applications. Our machine also offers intuitive operation to optimize your packaging processes. A high-quality material unwinder with double automatic roll centering ensures precise material guidance. Additionally, our active material pre-feeding system guarantees optimal web tension for flawless packaging results. The exceptionally powerful brushless motors and the user-friendly color touchscreen control system provide maximum flexibility during format changes and greatly simplify your packaging operations. The machine features memory slots for machine parameter settings, allowing storage for up to 50 different products. For this packaging line, we also offer both fully and semi-automatic feeding systems, which can be retrofitted on request. The machine is available in both running directions and is equipped with a rotary end seal unit featuring an electronic overload protection switch for maximum safety. Thanks to its performance, versatility, and technological advancement, our machine is ideally suited for packaging food products such as brioches, cakes, candies, pralines, chocolate, as well as pharmaceutical products and various gift items. If you want to optimize your packaging processes through strong production performance and high quality, Impuls Packaging is your ideal partner. Machine Features 1. Chain conveyor belt, 2.6 meters long (other lengths available on request) 2. Adjustable bag former 3. Single film loader + automatic film centering device 4. Rotary end sealing, single sealing jaw 5. Robust, central fin-seal structure 6. Four servo drive controls: - Active material pre-feeding roller - Central sealing - End sealing - Conveyor belt 7. HMI control panel 8. Three individual temperature controllers 9. Housing made of 304 stainless steel 10. Documentation in national language 11. Print mark control 12. Programmable bag length or with fully automatic product length detection 13. Standard running direction left to right Technical Parameters 1. Product length: L40–600 mm 2. Product width: W30-200 mm 3. Product height: H10–80 mm 4. Packaging speed: up to 80 products/min 5. Maximum film width: 600 mm 6. Supply voltage: 1Ph. 220V 50Hz 7. Total power: approx. 4.7 kW 8. Machine weight: approx. 550 kg Kwsdpfswld Tfsx Af Iot 9. Machine dimensions: approx. 4300 x 1190 x 1210 mm

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, garantijos trukmė: 12 mėnesiai, The all-rounder combines outstanding build quality with a wide range of applications. Our machine also features intuitive operation, optimizing your packaging processes. A high-quality film unwinder with dual automatic roll centering ensures precise material guidance. In addition, our active film pre-feed system guarantees optimal web tension for flawless packaging results. The highly powerful brushless motors and the user-friendly color touchscreen control system provide you with maximum flexibility during format changes, significantly simplifying your packaging operations. The machine offers memory slots for machine parameter settings, allowing storage for up to 50 different products. For this packaging line, we also offer fully and semi-automatic infeed systems, which we can retrofit for you upon request. The machine is available in both running directions and features a rotary cross-sealing unit with electronic overload protection switch for maximum safety. Thanks to its high performance, versatility and advanced technology, our machine is ideally suited for packaging food products such as brioches, cakes, candies, pralines, chocolate, as well as pharmaceutical products and various gift items. If you are looking to optimize your packaging processes with robust production performance and high quality, Impuls Packaging is your ideal partner. Kjdpfjwld Upjx Af Iswt System Features 1. Chain conveyor belt, 2.6 metres length (other lengths available upon request) 2. Adjustable bag forming unit 3. Single film loader + automatic film centering device 4. Rotary end sealing with single sealing jaw 5. Heavy-duty, central fin seal structure 6. Four servo-driven units: - active film pre-feed shaft - central sealing - end sealing - conveyor belt 7. HMI control panel 8. Three individual temperature controllers 9. Casing made of stainless steel 304 10. Documentation in local language 11. Print mark control 12. Bag length programmable or with fully automatic product length detection 13. Standard running direction: left to right Technical Parameters 1. Product length: L120–500 mm 2. Product width: W30-200 mm 3. Product height: H10–80 mm 4. Packaging speed: up to 100 products/min (depending on product, bag length and material) 5. Maximum film width: 600 mm 6. Power supply: 1Ph. 220V 50Hz 7. Total power: approx. 4.8 kW 8. Machine weight: approx. 550 kg 9. Machine dimensions: approx. 4280 x 1200 x 1230 mm

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, garantijos trukmė: 12 mėnesiai, Our state-of-the-art VFFS packaging machine is a highly versatile solution, designed to optimally support companies that demand the highest quality standards. With superior workmanship and a wide range of applications, our machine features intuitive operation, streamlining your packaging processes. The exceptionally powerful motors and the user-friendly color touchscreen control system provide maximum flexibility for format changes, significantly simplifying your packaging operations. The machine is equipped with memory slots for storing machine parameter settings. For this packaging line, we also offer fully and semi-automatic feeding systems including weighing systems, which can be retrofitted for you if required. If you are looking to optimize your packaging processes with strong production performance and high quality, Impuls Packaging is your ideal partner. System features: 1. Single film loader 2. Single, servo-driven sealing jaw 3. Three servo-drive controls 4. HMI control panel 5. Two individual temperature controllers 6. Housing made of 304 stainless steel Kedjwlgnropfx Af Ijwt 7. Documentation in the national language 8. Print mark control 9. Programmable bag length 10. Vertical film flow direction 11. One set of forming shoulders included in the price. Technical parameters: 1. Product length: L50-290mm 2. Product width: W80-200mm 3. Packaging speed: up to 45 products/min (depending on product, bag length, and material) 4. Maximum film width: 420mm 5. Power supply: 1Ph. 220V 50Hz 6. Total power: approx. 3.9 kW 7. Machine weight: approx. 300 kg 8. Machine dimensions: approx. 1300x1170x1585mm Bag types: 1. Classic flowpack bag 2. Stand-up pouch (classic flowpack bag with side gusset – optional, subject to surcharge)

Sąlyga: naudotas, Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, greitas poslinkis X ašimi: 36 m/min, greitas poslinkis Y ašis: 36 m/min, greitasis eiga Z ašyje: 25 m/min, nominali (akivaizdi) galia: 16 kVA, sukimo momentas: 95 Nm, valdiklių gamintojas: Heidenhain, valdiklio modelis: iTNC530, ruošinio svoris (maks.): 1 100 kg, stalo plotis: 500 mm, stalo ilgis: 800 mm, sukimosi greitis (maks.): 16 000 aps./min, bendras svoris: 5 000 kg, veleno greitis (maks.): 16 000 aps./min, ašies variklio galia: 18 W, įrankio ilgis: 305 mm, įrankio skersmuo: 77 mm, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, Įranga: dokumentacija / vadovas, drožlių transporteris, We offer this used AGIE CHARMILLES MIKRON VCE 800X PRO vertical machining center, year of manufacture 2012. Year: 2012 Control: iTNC530 Supply voltage: 3x400 VAC + PE Frequency: 50/60 Hz Protective current: 32 A Control voltage: 24 V DC Connected load: 16 kW Sound level: 76 dB(A) Weight: 5000 kg cos φ: 0.9 Serial number: 1033618 Revision: V6.2 Document validity: 17.03.2010 Prepared for 4th axis plus 4th axis from Lehmann Complete, fully enclosed machine cabin • 2 side windows, large front door • Efficient lighting in the work area Kodpfx Ajx Nikwef Iewt • Telescopic covers for X, Y, and Z axes • Spiral chip conveyor with mechanical double filter • Automatic central lubrication • Side-mounted tool changer • Manual rinse gun • Manual compressed air gun • Operating status signal lamp • 10,000 rpm spindle (Pro-X 16,000 rpm) • Water-cooled spindle head • Active spindle chiller (14,000 / 16,000 rpm) • Side chip flushing system (Mikron VCE 600Pro - Mikron VCE 1400Pro) • Coolant and air nozzles on the spindle head • Pull-out coolant tank Threads without compensating sleeves Heidenhain iTNC530 control unit Portable handwheel Heidenhain smart.NC Management of 30,000 tools Ethernet network connection and RS 232 interface Prepared for options If you have any questions or need further information, please send us a message or contact us by phone.

Sąlyga: naujas, Gamybos metai: 2025, Parts Cleaning Machine, Spray Cleaning System Type L901FP Fully automatic hot-water parts washer with basket drive powered by geared motor. The housing of the unit is made of stainless steel 1.4301; all piping and rotating basket are zinc-plated steel. Special nozzle system equipped with stainless steel flat spray nozzles. Washing pump made of stainless steel (manufacturer: Xylem/Lowara). Level control for dry-running protection. - Basket diameter: 910 mm - Usable height: 520 mm - Max. load weight: 150 kg - Spray pressure: 3 bar - Tank capacity: 190 liters - Heating: electrically adjustable (ambient temp. to 60°C) System dimensions (LxWxH): 1,300 x 1,350 x 1,990 mm Suction filter for pump protection Kwsdpfxendcbys Af Iet Delivery: ex works, FCA