4-Šalutiniai Obliavimo pirkti naudotą (62 777)

Sąlyga: naudotas,

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of delivery: Podpfx Asd Tbbdof Nogg - 4 rack uprights, height 2,600 mm with base section 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts reorder and extension possible at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load identification plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with advance delivery notification. The material is sensibly packed to ensure easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, suitable for dowels, and able to support the applied loads. The ground condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to professional association guidelines, rack uprights should have at least 500 mm overhang above the top storage level.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack used: Bolt system in hot-dip galvanized version Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and extensions can be reordered at any time) - (Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE sections (bolt system) - Surface hot-dip galvanized Pedpfxjfdkb Ts Af Nsgg - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with pre-delivery notification. The material is packed for easy unloading. For outdoor installation, the load capacities must be reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowelling, and capable of absorbing the acting loads. Floor condition and load-bearing capacity, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to trade association recommendations, the rack uprights should project at least 500 mm above the top storage level.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack, used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms, 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright distance 1,300 mm) Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and system can be expanded at any time) - (Offer available for larger quantities: approx. 90 uprights in stock) Pedpfx Asd Tqaljf Nogg Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Assembly instructions and capacity signs C4 according to DIN standard included - Expert telephone consultation - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with pre-delivery notification. Materials are sensibly packed for easy unloading on site. When installed outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, level, suitable for anchor fixing, and capable of bearing the loads. The floor condition and load-bearing capacity as well as any required permits must be checked and ensured by the customer. The uprights must be anchored into the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that uprights extend at least 500 mm above the top storage level.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Cantilever rack, painted version (RAL 7016 Anthracite): Scope of delivery: Pedsguk A Hopfx Af Negg - 4 upright frames, height 2.56 m, with base section, 1.0 m usable depth (1.2 m total depth) - 12 cantilever arms, 1.0 m usable depth - Longitudinal and diagonal bracing for 4 m rack length (spacing 1.3 m) - Fastening material (bolts, nuts, and washers) (*No paint damage!) Net price for pickup: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolt-in system) - Surface painted according to RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per frame: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per frame as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight shipping with advance notification before delivery. The material is packed efficiently to enable easy unloading. The subfloor must be made of concrete, level and suitable for anchoring, and capable of bearing the applied loads. The customer is responsible for checking and ensuring the ground conditions, load-bearing capacity, and obtaining any necessary official permits. Rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to German professional association guidelines, it is recommended that the upright frames extend at least 500 mm above the top storage level.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,500 mm, with foot section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Incl. longitudinal and diagonal braces for 1,300 mm axle spacing Pedpfxjfdkb Uj Af Njgg Incl. fastening material (without floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and extensions possible at any time - Offer available in larger quantities: approx. 40 uprights in stock Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with prior delivery notification. Material is sensibly packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be made of concrete, level, and suitable for anchors, and capable of bearing the relevant loads. The customer is responsible for checking and ensuring the substrate conditions and load-bearing capacity as well as any potentially required official permits. Uprights must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the uprights feature at least a 500 mm projection above the top storage level.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2024, Cantilever rack used: Bolted system in hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm with foot sections 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing Pgjdpfxsguk Dks Af Njg - Including fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Total racking length = 4,000 mm - Including fastening material (without floor anchors) - Comes with assembly instructions and C4 load labels according to DIN standard - Expert consultation by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notice prior to delivery. Material is well-packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for doweling, and capable of bearing the loads involved. The client is responsible for ensuring the condition and load-bearing capacity of the floor as well as obtaining any necessary official permits. The rack uprights must be anchored in the floor on site—a wall anchoring is neither required nor recommended. According to professional association recommendations, the rack uprights should have a minimum 500 mm projection above the top storage level.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Used cantilever racking: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm with 1,200 mm foot sections - 12 cantilever arms with 1,200 mm usable depth, standard - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Includes mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot sections and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - Supplied with assembly instructions and load labels C4 as per DIN standard - Professional phone consultation - Made in Germany - Short delivery times Pgodpfxefdkbhs Af Nsg - Local collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notice before delivery. The material is sensibly packaged to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow load. The subfloor must be concrete, level, and suitable for dowelling as well as able to bear the applied loads. The floor condition, bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should project at least 500 mm above the top storage level.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Rack Used: Bolt-together System in Hot-dip Galvanized Version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section 1,000 mm - 12 cantilever arms with 1,000 mm effective depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay width - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm bay width - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard Podpfx Afoguk Dvs Nogg - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification prior to delivery. The material is sensibly packed to allow for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, and suitable for doweling, and must be able to absorb the acting loads. Floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to the employers’ liability insurance association, it is recommended that the uprights feature a minimum 500 mm overhang above the top storage level.

Sąlyga: beveik kaip naujas (naudotas), Treif Brotschneidemaschine 4-24MM, in gutem Arbeitszustand. Für weitere Informationen senden Sie bitte eine Anfrage. Pjdpfx Asumpg Rsf Nogg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2020, 1. WEISHAUPT WM-G10/4-A (with gas train) - Output: 100-1100 kW Pgedpfx Aowgyrtjf Neg - Version: ZM-LN - Year of manufacture: 2020 2. WEISHAUPT WM-G10/3-A (with gas train) - Output: 100-1000 kW - Version: ZM - Year of manufacture: 2013

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2011, WEISHAUPT WM-G10/A-4; Su dujų trasa - Galia: 110-1250 kW - Pagaminimo metai: 2011 - Vykdymas: ZM Podjwgym Dopfx Af Nsgg

Sąlyga: labai geros būklės (naudotas), CNC rotary table, Nikken 5AX-230, 4th and 5th axis for Mazak etc. Previously mounted on a VTC 300, now for sale due to replacement with a new 5-axis machine. Pedpfx Aep U Umkjf Njgg

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: EAN0729389556525, bendras ilgis: 34 000 mm, lentynos aukštis: 3 500 mm, atrama ilgis: 2 700 mm, lentyna ilgis: 8 500 mm, rėmo aukštis: 3 500 mm, apkrova vienai santvarų porai (maks.): 3 000 kg, rėmo plotis: 1 100 mm, lentynų eilučių skaičius: 4, padėklų vietos: 108 euro padėklai, 4 rows of pallet racks (4 x M35112711-2) Each 8.5 m long, 3.5 m high, 1.1 m deep Each with 3 bays, 2.7 m wide Each with 2 beam levels, bay load capacity 3,000 kg - 16 frames (RM3511 - RAL5019) - 32 base plates, laying material, fastening material - 64 floor anchors (ZZBA1210) - 48 individual beams (T27114 - RAL2008) Podpfx Afjv Ukz As Negg - 4 load capacity signs (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - Maximum 20 working days after receipt of payment - Delivered free to construction site / assembly location - Unloading from the truck to be carried out by the buyer using own lifting equipment - Delivery throughout the entire territory of the Federal Republic of Germany (except islands!). - Deliveries to EU countries according to individual agreement.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, juostinio pjūklo ilgas: 5 700 mm, pjūklo juostos plotis: 41 mm, bendras aukštis: 1 720 mm, bendras ilgis: 2 600 mm, bendras plotis: 2 400 mm, padavimo ilgis X ašis: 600 mm, Apvalaus plieno pjovimo diapazonas ties 90°: 400 mm, pjovimo plotis (maks.): 400 mm, stalo aukštis: 700 mm, bendras svoris: 2 200 kg, pjovimo aukštis (maks.): 400 mm, Fully hydraulic high-performance bandsawing machine in heavy-duty design, featuring a horizontally parallel-moving saw band for cutting profiles, pipes, and solid materials of all grades—including extremely difficult-to-machine materials (e.g., titanium, Inconel, Hastelloy). Suitable for use with bimetal and carbide-tipped saw bands. The saw unit is made from solid polymer concrete, ensuring maximum running smoothness and extended saw band life. The saw unit is guided by two vertical square columns (twin-column guide), with hardened and ground guide rails. The saw band is hydraulically tensioned, and carbide saw band guides are hydraulically preloaded. Material clamping is achieved with two horizontal frame clamps. Material feed is facilitated by a non-driven roller conveyor with twelve transport rollers integrated into the machine, allowing even short remnants to be transported without issue. Year of manufacture: 2004 Cutting range round: 400 mm Cutting range square: 400x400 mm Automatic material feed: 600 mm Multiple material feed: 99,999 mm Cutting speed: stepless, 20–130 m/min Total drive power: 7 kW Saw motor drive power: 4 kW Clamping pressure reduction: infinitely adjustable Material support height: 700 mm Saw band dimensions: 5700x41x1.3 mm Pgedsupvrxopfx Af Nsg Shortest cut length in automatic operation: 6 mm Remnant piece length in automatic operation: 80 mm Voltage: 380V/50 Hz Dimensions LxWxH: 2600x2400x1720 mm Weight: 2200 kg // Equipment: Coolant system Full enclosure CNC control Idle monitoring Band tracking control Side guide rollers Height measurement system Light barrier

Sąlyga: naujas, Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, Kaina taikoma visam komplektui kartu. Puikiai tinka pradėti šilkografijos veiklą, menininkų studijai, menininkams. Rinkinį sudaro: Pgjdpfx Afsxwnw As Neg 1. ŠILKOGRAFIJOS KARUSELĖ, X 4 STALAI, PILNAI REGULIUOJAMA 2. DŽIOVINTUVAS: 3 FAZIŲ MAITINIMAS 3. AUTOMATINIS FLASH DŽIOVINTUVAS: 3 FAZIŲ MAITINIMAS VISKAS NAUJA, IŠPAKUOTA IŠ DĖŽIŲ.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1995,

Sąlyga: paruoštas naudoti (naudotas), valdiklio modelis: Haas, tuščias svoris: 12 000 kg, bendras ilgis: 5 950 mm, bendras plotis: 3 048 mm, bendras aukštis: 2 200 mm, sūpynės skersmuo virš skersinio vežimo: 2 000 mm, CNC holle-as slant bed 'oil country' draaibank Zwaai over het bed: 1350 mm Zwaai over de dwarssupport: 400 mm Diameter van de spilboring: 270 mm (!!) Spilvermogen: 55 pk Aantal toerentallen: 1 > 500 tpm Grote doorlaat toolroom draaibank Draaibank met dubbele klauwplaat Spanenafvoerband Pgsdpowu Ipijfx Af Njg

Sąlyga: naujas, VERKAUF AB LAGER Tragfähigkeit: 240 kg Max. Plattformhöhe: 4 m Anzahl der Bediener: 1 Plattformabmessungen: 1,15 x 0,6 m Gesamtlänge: 1,32 m Gesamtbreite: 0,76 m Gesamthöhe: 1,92 m Plattformausschub: 0,55 m Ausschubkapazität: 100 kg Hub-/Senkzeit: 34/25 sek Wendekreis: 0 Maximale Neigung: 1,5°/2° Antriebsräder: 230 x 80 mm Steigfähigkeit: 25 % Radstand: 1,0 m Fahrgeschwindigkeit (eingefahren): 4 km/h Fahrgeschwindigkeit (angehoben): 0,5 km/h Batterie: 2 x 12 V / 100 Ah Hubmotor: 24 V / 1,3 kW Fahrmotoren: 24 V / 0,5 kW Ladegerät: 24 V / 15 A Eigengewicht: 660 kg Proportionalsteuerung Automatischer Schlaglochschutz Fahrbar in voller Höhe Podpsulah Njfx Af Nogg Nicht-markierende Bereifung Automatisches Bremssystem Notablasssystem Not-Aus-Taster Zylinderhalteventil Integriertes Diagnosesystem

Sąlyga: naujas, Gamybos metai: 2025, Tout inox Mélangeur Tumbler – livraison rapide d’une machine Fabrication neuve sur commande Cuve en acier inoxydable de haute qualité, inox 316 Vitesse de rotation variable de 0 à 24 tr/min Déchargement par basculement électrique Pgsdpfxsif Upfs Af Neg Capacité de 50 kg à 90 kg selon le type de produit 2 modèles disponibles

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, 4 Stk. Edelstahltrichter 3 Stk. Trichter Abmessungen: 700 mm x 1200 mm x 1220 mm (Höhe) 1 Stk. Trichter mit Abmessungen: 1200 mm x 1200 mm x 1220 mm (Höhe) Mit Hand-Absperrschieber Gasdruckdämpfer für Deckelöffnung Innenliegendes Edelstahl-Siebsieb Mobil auf arretierbaren Lenkrollen Teilweise mit pneumatischer Vibrationsvorrichtung Teilweise mit Füllstandsensor Pgsdpeurf Twsfx Af Nog In exzellentem Zustand

Sąlyga: naudotas, Nordson ProBlue 4 Heißleimpumpe Modell ProBlue 4 Komplett mit 2 beheizten Schläuchen und Auftragsdüsen, Luftmagnetventil & Modulen Behälter für Klebstoffauftrag / Aufbewahrungsbehälter Pedpfx Aowq Sv Ejf Nsgg Montiert auf einem Edelstahlrahmen

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: AB00022255, darbinio aukščio: 250 mm, stalo ilgis: 520 mm, stalo plotis: 900 mm, padavimo volo skersmuo: 67 mm, peilio veleno skersmuo: 120 mm, TECHNINĖ INFORMACIJA Darbo stalo matmenys: 520 x 900 mm Darbo aukštis: maks. 250 mm Darbo aukštis: min. 3 mm Tersa peilių velenas: 520 mm su 4 peiliais Peilių veleno skersmuo: 120 mm Padavimo volo skersmuo: 67 mm Padavimo greitis: 5 / 8 / 12 / 18 m/min Pedpfx Ajydc Ecjf Nogg ĮRENGINIO DUOMENYS Pagrindinio variklio galia: 9 kW Svoris: 1 058 kg ĮRANGA Pneumatinis stalo reguliavimas Elektroninis storio stalo aukščio reguliavimas per pozicijų valdiklį Pasukamas paralelinis liniuotė ir pagalbinis liniuotė lentoms

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Visiškai veikianti obliavimo gamykla su WACO 6 velenų obliavimo staklėmis, dviguba juostine rėžimo stakle, pilna mechanizacija, drėgmės matavimu, valdymu ir tt. Tiesiog pilnas komplektas! Našumas apie 2 500 m3 per mėnesį ir pamainą, priklausomai nuo išmatavimų. Pgsdpfx Afsw N S Nhe Neg Įrangą sudaro: Plokščių nuėmimo rūšiavimo mechanizmas, vienetinis padavimas, Brookhuis drėgmės matavimas, dviguba juostinė rėžimo staklė (Brau Canali gamyba), mažų ryšulių formavimas ir tiekimas į kaupimo staklę, 2 krovimo staklės su tašelių dėjimu, pilna pakavimo linija su plėvelės vyniojimu, paketų presas su apatiniu rąstų įdėjimu. Visa valdymo sistema Siemens, plieno pagrindo rėmai, visi laidai, vamzdžiai ir kt. Labai gerai prižiūrėta linija skirta tašelių, liežuvėlių ir griovelių, dvitėjinės konstrukcinės medienos gamybai.

Sąlyga: labai geros būklės (naudotas), CATALOG NUMBER 7679 TECHNICAL DATA Pgsdpfjwtp U Rex Af Neg - Maximum planing width: 610 mm - Maximum double-sided planing height: 200 mm - Electric table height adjustment (up/down) - Maximum four-sided planing height: 100 mm – Top section: - Feed-in roller, toothed - Kickback prevention devices - Pressure bar - 2 toothed feed rollers - Pressure bar - Planing shaft 610 mm, 4-knives, 7.5 kW - Pressure bar - Smooth outfeed roller – Bottom section: - Guide bar - Toothed feed roller - Planing shaft 610 mm, 4-knives, 5.5 kW - 2 smooth feed rollers – Rear: - 2 side spindles + pressure bar 1) Right vertical, 100 mm, 4 kW 2) Left vertical, 100 mm, 4 kW - Spindle diameter: 35 mm - Spindles adjustable (up/down, right/left) - Manual planing width adjustment - 6 feed speeds: 7/9/11.5/14/18/23 m/min - Feed motor: 3.1 kW - Dimensions (LxWxH): 2500x1800x600 mm - Weight: approx. 3000 kg ADVANTAGES – Ideal for processing beams, floorboards, etc. – Manufactured by the German brand KUPFERMUHLE – 2 horizontal planing shafts + 2 vertical spindles – Used planer, condition very good Net price: 56,900 PLN Net price: 13,550 EUR (based on an exchange rate of 4.2 EUR) (Prices may vary with exchange rate fluctuations)