Žemiau Pavara pirkti naudotą (2 398)

Sąlyga: labai geros būklės (naudotas), For sale: Lukas double-acting column hydraulic spreader/cylinder. - Model LZR 12/300 - Model LZR 12/700 EN Gedpfx Aev Dx Ntobmeuk - Condition: Very good. - Price listed for cylinder LZR 12/300: €450

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 480 V, įvesties srovės tipas: Oro kondicionierius, apsaugos tipas (IP kodas): IP20, Schneider/Telemecanique Altivar 21 Frequenzumrichter, Modell ATV21WU55N4 (5,5 kW, 380–480 V). Dieser auf HLK-Anwendungen (Heizung, Lüftung, Klima) spezialisierte Frequenzumrichter ist für die energieeffiziente Drehzahlregelung von 3-phasigen Motoren wie Ventilatoren, Pumpen und Gebläsen konzipiert. Das Gerät verfügt über eine übersichtliche Front-Bedienung, Modbus-Kommunikation und eine sanfte PWM-Motoransteuerung. Godpfx Aoxy Rd Rsbmouk Technische Daten: - 5,5 kW (7,5 PS) - 380–480 V, 3~ Ein-/Ausgang - Max. Strom: 12 A - 50/60 Hz - Schutzart: IP20 - Integriertes Bedientableau (RUN/STOP, MODE, ENT, Auf/Ab) - Modbus-kommunikationsbereit Das Gerät befindet sich in gutem, funktionstüchtigem Zustand und wurde aus einer laufenden Lüftungsanlage demontiert (Beschriftung: Putimo vent. SVRPV-7). Frequenzumrichter (VFD) Schneider/Telemecanique Altivar 21 (ATV21WU55N4) Hersteller: Schneider Electric / Telemecanique Modell: Altivar 21 – ATV21WU55N4 Typ: HLK-optimierter Frequenzumrichter für 3-Phasen-Asynchronmotoren Motorleistung 5,5 kW / 7,5 PS Eingangsspannung 380–480 V AC, 3-phasig Ausgangsspannung 380–480 V AC, 3-phasig Frequenz 50/60 Hz Ausgangsstrom ≤ 12 A Steuerung PWM-Regler Schutzart IP20-Gehäuse Bedienung Integriertes Bedienfeld Kommunikationsprotokolle Modbus (nativ) – BACnet-fähig abhängig von der Parametrierung Seriennummer 6W0634001003 (Frankreich) Modellrevision V1.4 IE04 Montage Schaltschrank-/Wandmontage

Sąlyga: geras (naudotas), Rotary actuator for air dampers, air damper rotary actuator -Shaft mounting (hollow shaft): approx. Ø 32 mm -24 VAC -Protection class: IP 54 -20 Nm 90° Gsdpsb A H N Refx Abmouk -Price: per unit -Quantity: 1x available -Weight: 1.8 kg

Sąlyga: naudotas, Žingsnis: 22 mm Tvirtinimo kotas: 5 mm Gsdpfx Aow Uqpksbmsuk

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, galia: 235,36 kW (320,00 AG), ašių konfigūracija: 4x4, kuras: dyzelinas, spalva: raudona, pavaros tipas: pusiau automatinis, emisijos klasė: Euro 6, Gamybos metai: 2025, Įranga: centrinis užraktas, diferencialo užraktas, oro kondicionavimas, oro pagalvė, priekabos jungtis, visų varančiųjų ratų pavara,

Sąlyga: naudotas, Roller Conveyor 2750/2180/1500-420-350 with Chain Drive RA2003 The roller conveyor with chain drive is in good (used) condition and fully operational. It is equipped with a SEW brand geared motor. The supports/legs are not included in the scope of delivery but are available as an optional extra upon request. Technical Data: Condition: good (used) Conveyor length (FL): 2750/2180/1500 mm Nominal width (NB): 420 mm (external width) Roller width (RB): 350 mm Usable width (NUB): 355 mm Side walls: stainless steel Rollers: galvanized, diameter 50 mm Roller pitch: 65 mm (distance) Motor: SEW Eurodrive Drive: chain drive with continuous chain, tensioned via tensioning device Electrical data: 380 V, 0.75 kW, 3.7 A Scope of delivery: without supports and side guides (please request separately if required) Options available: Gsdek Abtajpfx Abmeuk - Supports - Side guides - Frequency inverter for stepless speed regulation Availability: 3 identical conveyors – individually adaptable and combinable Price plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg For individual, professional advice, simply contact us. You can reach us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and partner for intralogistics.

Sąlyga: geras (naudotas), For sale: - Raco T606 electric actuator - Actuator stroke length: 800 mm - Motor: 0.75 kW, 230/380 V Gjdpfsv Ubt Njx Abmjuk - Speed: 20 mm/s - Force: 15 kN

Sąlyga: naudotas, mašinos/transporto priemonės numeris: SA9FT3A50MH17xxxx, Gamybos metai: 2021, Norėdami gauti daugiau informacijos, kreipkitės į ATS Norway. Prašome užklausoje nurodyti nuorodos numerį: 20727 Specifikacijos: - ES patvirtintas iki 2026-05-07 - Pagaminimo metai: 2021 Guedpfx Aewvy Rzebmjk - Padangos: žr. nuotraukas - Hidrauliniai užvažiavimo trapai - Rankinis praplatinimas - Ilgis: 1 095 cm - Plotis: 254 cm - Ašių atstumas: 514 / 136 cm - Savaiminis svoris: 7 000 kg - Įskaitant įrankių dėžę Aprašymas: ES patvirtintas ir paruoštas naudojimui. Įrengtas hidrauliniais užvažiavimo trapais ir rankiniu platinimu. Galimas greitas pristatymas. TÜV: Taip ES patvirtintas iki: 2026-05-07 Savaiminis svoris: 7 000 Bendras svoris: 28 000 Naudingoji apkrova: 21 000 Plotis: 254 Ilgis: 1 095 Modelis: su hidrauliniais užvažiavimo trapais

Sąlyga: geras (naudotas), Vilkimo galvutė, vilkimo krautuvas, vilkiko rankinė keltuvė, vilkimo sija, vairavimas, elektrinis rankinis vežimėlis Gedpfx Abjxd T S Eemeuk -Gamintojas: Linde, komplektas su pavara iš elektrinio aukštakėlimo L 12 -Pavaros variklis: tipas T 12, 24 V -Pristatymas/Kaina: pilnas komplektas -Transportavimo matmenys: 1200/440/A270 mm -Svoris: 44 kg

Sąlyga: naudotas, Kaip naujas T – kampinis arba kūginis reduktorius Tandler O1-III tipas, plieninis, perdavimo santykis: 2:1. Gamintojo numeris: 151227 Plotis: 222 mm Aukštis: 190 mm Gylis: 110 mm Guedsw Uhhkjpfx Abmjk Santykis: 2:1 Velenai: 22 x 6

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, galia: 375,1 kW (509,99 AG), ašių konfigūracija: 4x4, kuras: dyzelinas, emisijos klasė: Euro 6, Gamybos metai: 2025, Įranga: oro pagalvė, papildomi žibintai, priekabos jungtis,

Sąlyga: naudotas, Roller Conveyor 2750/2180/1500-420-350 with Chain Drive RA2003 The roller conveyor with chain drive is in good (used) condition and fully operational. It is equipped with a SEW brand geared motor. The supports/legs are not included in the scope of delivery but are available as an optional extra upon request. Technical Data: Condition: good (used) Conveyor length (FL): 2750/2180/1500 mm Gjdpforvmtdsx Abmjuk Nominal width (NB): 420 mm (external width) Roller width (RB): 350 mm Usable width (NUB): 355 mm Side walls: stainless steel Rollers: galvanized, diameter 50 mm Roller pitch: 65 mm (distance) Motor: SEW Eurodrive Drive: chain drive with continuous chain, tensioned via tensioning device Electrical data: 380 V, 0.75 kW, 3.7 A Scope of delivery: without supports and side guides (please request separately if required) Options available: - Supports - Side guides - Frequency inverter for stepless speed regulation Availability: 3 identical conveyors – individually adaptable and combinable Price plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg For individual, professional advice, simply contact us. You can reach us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and partner for intralogistics.

Sąlyga: naujas, AUMA 07.1-F10 multi-turn actuator, new - Order no.: 23078028 Guedpfx Ajv Uaicebmsk - Serial no.: 2218NS66675 - PTB 01 ATEX 1119 - SKE0 56-2/80 - Part no.: Z048.703 - AZ F-3-S-ISO-STD

Sąlyga: naujas, Bending length: 2600 mm Sheet thickness: 7 mm Top roll diameter: 200 mm Technical specifications: - Rear roll driven by motor - Cone bending device - Hardened and polished rolls - Entire frame made of St 52 steel - Asymmetric design for optimal bending performance - Top and bottom rolls driven by brake electric motors and planetary gearboxes - Mobile control panel Gusdsd Ab Ngspfx Abmjk - CE compliant Options: - Bottom roll driven by electric motor EUR 2,200 - Digital display for rear roll position EUR 1,010 - Extended rolls EUR 966 - Profile rolls EUR 1,190 We have numerous references!

Sąlyga: naudotas, Hydraulic feed gearbox suitable for Harbs woodworking machines or similar. Gedpfewktmrjx Abmeuk The gearbox allows for manual, stepless adjustment of the feed or transmission speed.

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, galia: 235,36 kW (320,00 AG), kuro tipas: dyzelinas, bendras svoris: 18 000 kg, ašių konfigūracija: 4x4, kuras: dyzelinas, spalva: raudona, pavaros tipas: automatinis, Gamybos metai: 2025, Įranga: autonominis šildytuvas, diferencialo užraktas, oro kondicionavimas, oro pagalvė, priekabos jungtis, visų varančiųjų ratų pavara,

Sąlyga: naudotas, Transnorm Belt Curve Conveyor Left GKF 90°-780-600 IR600 with Dual Drive-Over RA2019 The Transnorm belt curve is in good condition (used) and fully operational. It is equipped with a gear motor from SEW. Support legs are not included in the scope of delivery but are optionally available upon request. Belt curves are frequently used in intralogistics for the internal transport of general cargo and are indispensable in modern distribution centers. Transnorm belt curves are known for their performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are not an issue. Conical drums and a specially developed belt guide system ensure maximum running smoothness. Technical Specifications: Frame width (NB): 780 mm Belt width (GuB): 600 mm Build height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 90° degrees Support legs: optionally available Conveying speed (v m/s): depends on the subsequent conveyor, please enquire Gujdpfx Abjk Abufemok Drive: No motor included, driven by the subsequent conveyor Scope of delivery: without support legs Optionally available: Support legs Side guides All prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg For individual, expert advice, please contact us directly. Simply call us or send us an email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG team Your specialist and contact partner for intralogistics

Sąlyga: naujas, Lankstymo ilgis: 1600 mm, Lakšto storis: 8 mm, Viršutinio volo skersmuo: 170 mm Techniniai duomenys: - Atgalinis volas varomas varikliu - Kūginio lankstymo įtaisas - Grūdinti ir poliruoti volai - Visa konstrukcija pagaminta iš St 52 plieno - Asimetrinis dizainas tobulam lankstymui - Viršutinis ir apatinis volai varomi stabdžiu elektros varikliais ir planetiniais pavarų dėžės reduktoriais Gedpfxed Ab Nqj Abmjuk - Nešiojamas valdymo pultas - Atitinka CE standartus Parinktys: - Apatinis volas varomas elektros varikliu: 1 650 EUR - Skaitmeninis displėjus atgalinio volo padėties rodymui: 1 010 EUR - Pratęsti volai: 966 EUR - Profilių volai: 1 190 EUR Turime labai daug rekomendacijų!

Sąlyga: naudotas, motor: 0.5 kW Gjdsq Scahepfx Abmouk

Sąlyga: naudotas, Gamybos metai: 2001, Transnorm Roller Curve Conveyor 180°-900-800 IR800 RA2233 Technical Data: Manufacturer: Transnorm Type: TS 2712 Roller Curve 180° Year of construction: 2001 Condition: Good (used) Motor: Fully functional Angle: 180° Inner radius RN: 800 mm (nominal radius) Outer width: 900 mm Installation length: 800 mm Gusdpfx Ajrixkbsbmok Motor type: SEW geared motor, R17DT71D4/TH Motor power: V 380-500, kW 0.37 Drive: Central drive with chain transmission Conveying speed: Please contact us Weight: 260 kg Scope of delivery: Without supports Optional available: - Supports - Side guides (single-sided or double-sided) - Frequency inverter for stepless speed adjustment - Length adjustment (longer/shorter) - Additional roller conveyors/roller curves with chain drive All prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For a tailored and professional consultation, feel free to contact us. Please reach out by phone or email. We are happy to assist you in planning and implementing your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and partner for intralogistics.

Sąlyga: naujas, Bending length: 1550 mm Sheet thickness: 3.5 mm Top roll diameter: 110 mm Technical data: - Rear roll motor-driven - Cone bending device - Complete frame made of St 52 steel - Main motor with brake system - Top and bottom rolls driven by electric motor, gearbox, and gear system - Portable control panel - Cast iron frame - Rear and lower roll movement manual - Compliant with CE standards Options: - Top roll driven by electric motor: €1,166 - Digital display for rear roll position: €1,010 - Hardened rolls: €995 Gjdpfxsd Ab N Ds Abmouk - Special voltage: €480 - Sheet feeding table - Lower roll driven by electric motor We have a large number of references!

Sąlyga: naudotas, Roller Conveyor 2750/2180/1500-420-350 with Chain Drive RA2003 The roller conveyor with chain drive is in good (used) condition and fully operational. It is equipped with a SEW brand geared motor. The supports/legs are not included in the scope of delivery but are available as an optional extra upon request. Technical Data: Condition: good (used) Conveyor length (FL): 2750/2180/1500 mm Nominal width (NB): 420 mm (external width) Roller width (RB): 350 mm Usable width (NUB): 355 mm Side walls: stainless steel Rollers: galvanized, diameter 50 mm Roller pitch: 65 mm (distance) Motor: SEW Eurodrive Drive: chain drive with continuous chain, tensioned via tensioning device Gjdok Abtdepfx Abmeuk Electrical data: 380 V, 0.75 kW, 3.7 A Scope of delivery: without supports and side guides (please request separately if required) Options available: - Supports - Side guides - Frequency inverter for stepless speed regulation Availability: 3 identical conveyors – individually adaptable and combinable Price plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg For individual, professional advice, simply contact us. You can reach us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and partner for intralogistics.

Sąlyga: naujas, Sheet thickness: 35 mm Bending length: 4100 mm Top roll diameter: 540 mm Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 steel - The 4 rolls are arranged symmetrically - Hydraulically operated top cover for easy material removal - Digital display for lower and side roll positions - Hydraulic adjustment - Top and bottom rolls driven by hydraulic system and gearbox - Vertical movements of the bottom roll are hydraulically driven - Mobile control panel - In compliance with CE standards Options: - Variable rotation speed: EURO 6,940 - Material feed table: EURO 5,100 Gedpfx Aed Ab N Iobmjuk - Oil cooler: STD - Central support: EURO 18,750 - Side supports: EURO 17,000 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have numerous references!

Sąlyga: naudotas, Transnorm ritininis konvejeris, ritininis transporteris su grandinine pavara RF 2515-670-620 RA1870 Gamintojas: Transnorm Volelių plotis (RB): 620 mm Nominalus / išorinis plotis (NB): 670 mm Ilgis: 2515 mm Volelių diametras: 50 mm Volelių žingsnis: 80 mm Rėmo aukštis: 120 mm Konvejerio variklis: SEW krumpliaratinis variklis su dažnio keitikliu Transportavimo greitis: laisvai reguliuojamas naudojant dažnio keitiklį Gusdok Abiqjpfx Abmek Trumpinamas 80 mm žingsniais Papildomos ritininių konvejerių dalys gali būti sujungtos grandinės pavara ir varomos vienu varikliu. Papildoma įranga: Atramos Šoninė kreipiančioji - viena arba abi pusės Dėl individualios, profesionalios konsultacijos susisiekite su mumis. Kreipkitės telefonu arba el. paštu. Mielai padėsime su Jūsų projektų planavimu ir įgyvendinimu. Laukiame Jūsų skambučio ar laiško. Pagarbiai, Dr. Sonntag GmbH & Co. KG komanda Jūsų specialistas ir kontaktinis asmuo intralogistikos klausimais.

Sąlyga: naujas, Sheet thickness: 70 Bending length: 2100 Upper roll diameter: 540 Technical specifications: - Hardened and polished rolls - Complete frame made of ST-52 steel - 4 rolls arranged symmetrically - Hydraulically operated top cover for easy material removal - Digital display for lower and side roll positions - Hydraulic positioning - Top and bottom rolls are driven by hydraulics and gearbox - Vertical movement of the lower roll is hydraulically operated Gusdpfx Asd Ab N Sebmjk - Movable control panel - In accordance with CE standards Options: - Variable rotation speed EURO 6,940 - Material feeding table EURO 5,100 - Oil cooler STD - Central support EURO 19,500 - Side supports EURO 10,400 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable bottom roll support system (for special customer requirements) We have many references!