Štampavimo Įrankiai pirkti naudotą (1 931)

Sąlyga: naujas, Gamybos metai: 2023, New set of blades for Bystronic Type P4 (with Euro clamping) Dsdpfswc Nm Sex Ab Sjul Total length 3100 mm

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2020, veikimo valandos: 2 000 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: HU50610, Control unit: 15" touch screen with Windows operating system Table dimensions: 630 x 360 mm Tank dimensions (LxWxH): 940 x 550 x 350 mm X-axis travel: 400 mm Y-axis travel: 300 mm Z-axis travel: 300 mm Table and clamping dimensions: 100 ~ 400 mm Max. electrode weight: 11/50 kg Max. workpiece weight: 500 kg Max. output current: 50A Best surface finish after machining: 0.08 Ra Input power: 10 kVA Dielectric fluid capacity: 300 L Machine dimensions (LxWxH): 1320 x 1380 x 2150 mm Weight: 1450 kg Accessories, Equipment - Number of filters: 3 pcs Dusdpfx Abowktkko Sol - C-axis (load capacity 11 kg) - Dielectric system - Machine feet - Documentation - Hand tools

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, CG 3 – Hold Point Grinder for Die Cutting Tools With pneumatic drive for high traction force and patented hold-down system. Ensures burr-free grinding of hold points while maintaining rubber performance. The pneumatic drive, powered by compressed air, delivers a very high and consistent pulling force that is always available, with no need for recharging cycles or battery replacements. The fabric-reinforced compressed air hose is highly flexible. The large support surface prevents tilting during grinding. This allows the operator to grind hold points accurately and precisely. The depth of the hold point can be set exactly using the depth adjustment. The patented hold-down system for rubbers and ejector materials prevents grinding into the rubber or profile. The advantage: fewer and smaller hold points are required, and the performance of the die rubber is preserved. The hold point grinder is available in versions for corrugated and solid board. The attachments are matched to the standard widths of diamond grinding wheels for corrugated and solid board. Diamond grinding wheels allow for optimal placement of breakers. Compared to stone grinding wheels, they are extremely robust and less prone to breakage. Additionally, they are more durable and sustainable. The scope of delivery for the hold point grinder includes a matching diamond grinding wheel for the device in the desired size. Manual hold point tools are the ideal complement to the hold point grinder. The chisels can be used to enlarge the hold points after grinding if necessary. Two manual hold point tools are also included in the package free of charge. Key Benefits at a Glance: Pneumatic drive for consistently high traction force Dujdexltkqopfx Ab Sol Large support area for straight and precise grinding of hold points Patented hold-down system for solid and corrugated board Note: The device operates with diamond grinding wheels in size 50 × 8 mm.

Sąlyga: naudotas, Single-column Eccentric Press WEINGARTEN Type EV 63 Mach. No. 738 / 61 Year of manufacture: 1962 Pressing force: 63 tons Duedok S Htxopfx Ab Sjl Throat depth: 260 mm Table area: 630 x 530 mm Table opening: Ø 210 mm Ram area: 315 x 260 mm Adjustable ram stroke: 8–100 mm Ram adjustment: 63 mm Max. installation height: 450 mm Stroke rate: 115 strokes/min Compressed air requirement: min. 4.5 bar Motor power: 4 kW Power supply: 380 Volt, 50 Hz Table height above floor: approx. 750 to 900 mm - Electric stroke release via foot switch or two-hand control - Overload protection via shear pin - Clutch-brake combination by WEINGARTEN friction-threaded clutch with TDC run-through protection - Front crankshaft support bearing - Press table height adjustable via 2 threaded spindles - Manual central grease lubrication - Freestanding control cabinet - UVV safety for manual loading operations Required space (L x W x H): 1750 x 1600 x 2430 mm Weight: 4.5 tons Good condition

Sąlyga: naujas, Werkzeuge für Zapfenschneidmaschine Dodpfsd Ezqujx Ab Ssul 4 Stück Werkzeuggruppen, Durchmesser 300 mm, Z=4, Bohrung 50 mm

Gamybos metai: 1994, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 25286,

Sąlyga: naudotas, Gamybos metai: 1970, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: M14L/6907, Pasiūlymo nr.: M14L/6907 Mašinos tipas: Srieginių plokščių žnyplių volas Informacija: Vibro padavėjas Gamintojas: MALMEDIE Tipas: AG13 Pagaminimo metai: 1970 Skersmens diapazonas: 8-16 mm Kotelio ilgis po galvute: 150 mm Didž. sriegio ilgis: 83 mm Našumas vnt./min.: 120 Duodpfswi Ta Nex Ab Ssl Vieta: Mūsų sandėlyje

Sąlyga: naudotas, Single-Column Eccentric Press WEINGARTEN Type ER 63 Machine No. 52A / 63 Year of manufacture: 1963 Pressing force: 63 tons Throat depth: 280 mm Table size: 630 x 530 mm Adjustable stroke: 8-100 mm Ram adjustment: 63 mm Stroke rate: 65 strokes/min Motor power: 4 kW Mains connection: 380 Volt, 50 Hz Djdpfxslb I Dze Ab Sjul - Clutch-brake combination with WEINGARTEN friction screw clutch - Electrically actuated stroke release via footswitch - Gear train - Overload protection via shear plate - Front main crankshaft bearing Space requirements (L x W x H): 1500 x 1100 x 2500 mm Weight: 4.5 tons Good condition

Sąlyga: naudotas, Gamybos metai: 1971, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: M14L/8133, Pasiūlymo numeris: M14L/8133 Mašinos tipas: Srieginių plokščių žnyplių volas Informacija: Vamzdžių tiekimas be galvučių detalėms Dsdpjwi S Irofx Ab Ssul Gamintojas: PELTZER-EHLERS Tipas: NKW12-ST8 Metai: 1971 Skersmens diapazonas: 6-12 mm Kotelio ilgis po galvute: 95 mm Maks. sriegio ilgis: 90 mm Našumas vnt./min: 55 Vieta: Mūsų sandėlyje

Sąlyga: naudotas, Punching tool with linearly integrated punching frames ABS-SCHWABE Type 100/160 11 punching frames, punching unit for press brake Year of manufacture: approx. 1990 Throat depth: 160 mm Punching capacity: 0.3 to 5 mm material thickness Hole diameter: 2 to 7 mm Installation height: 203 mm (only the punching frame alone with punching tool) Duedpfodz Sp Hox Ab Sol Fitted with a round punch tool ø 5 mm Punching frame spacing: 195 mm - The tool unit was mounted on a hydraulic press brake Dimensions of the punching frame baseplate (L x W x H): 2500 x 345 x 37.5 mm Dimensions of the punching frame pressure plate (L x W x H): 2500 x 173 x 20 mm Total dimensions (L x W x H): 2500 x 345 x 300 mm Weight: 400 kg Good condition

Sąlyga: naudotas, Gamybos metai: 1987, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: M14L/8196, Pasiūlymo Nr.: M14L/8196 Mašinos tipas: Sriegių plokščių žnyplių volas Gamintojas: SASPI Modelis: GV3-20 Pagaminimo metai: 1987 Skersmens diapazonas: 4-12 mm Kotelio ilgis po galvute: 150 mm Maks. sriegio ilgis: 130 mm Našumas vnt./min.: 85-220 Dujdpfx Aewi S Hzob Sol Vieta: Mūsų sandėlyje

Sąlyga: naudotas, Single-column eccentric press PELS – RICHTER Type PEKR 125 Machine no. 20684 Year of manufacture: 1967 Pressing force: 125 tons Throat depth: 430 mm Table size: 1100 x 750 mm Dodofim Thjpfx Ab Soul Ram area: 890 x 650 mm Table opening: Ø 400 mm Stroke adjustment: 6 to 115 mm Ram adjustment: 100 mm Installation height (max. stroke at top): max. 450 mm Clamping shank bore: Ø 50 mm Strokes per minute: 60 spm Table height above floor: 900 mm Motor power: 7.5 kW Electrical connection: 380 Volt, 50 Hz - Overload protection via breaking plate in ram - Pneumatic clutch-brake combination DESCH - Ram weight compensation cylinder - Manual ram adjustment - Two-hand operation - Cam switch mechanism - Vogele central lubrication - Stroke counter Required space (L x W x H): 2300 x 1450 x 3030 mm Weight: approx. 10 tons In good condition

Sąlyga: naudotas, Gamybos metai: 1987, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: M14L/8402, Pasiūlymo numeris: M14L/8402 Mašinos tipas: Srieginių plokščių žandikaulių volas Informacija: Vibracinis tiekiklis Gamintojas: MENN Tipas: GW83L Pagaminimo metai: 1987 Diametro diapazonas: 4-12 mm Kotelio ilgis po galvute: 150 mm Didžiausias sriegio ilgis: 105 mm Našumas vnt./min: 80-260 Vieta: Mūsų sandėlyje Dusdpjwi S A Nofx Ab Sjl

Sąlyga: naudotas, Eccentric Punching Press HAULICK + ROOS Type RVD 125 Double Column Eccentric Press Machine No. 212560 Year of manufacture: 1981 Pressing force: 125 tons Table size: 880 x 800 mm Table opening: 470 x 140 mm Column gap: 900 mm Side column spacing: 415 mm Ram stroke: 45 mm Ram adjustment: 0-80 mm Djdpehlnzkofx Ab Ssul Shut height as shown: 340 mm Strokes per minute: 50 to 300 spm Main drive motor power: 22 kW Power supply: 380 Volt, 50 Hz - Double connecting rod drive with 4-point eccentric shaft bearing for off-center ram force absorption - Free-standing electrical cabinet - NC roller feeder EBU, width 250 mm, year 2003 - Separate control panel for roller feed unit - Coil direction from left to right Space requirement (press) L x W x H: 3000 x 2000 x 3020 mm Transport height: 2950 mm Weight of press: approx. 11 tons

Sąlyga: naudotas, Gamybos metai: 1973, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: M14L/8559, Pasiūlymo numeris: M14L/8559 Mašinos tipas: Srieginių plokščių žandikaulių volas Informacija: Vibracinis padavėjas Gamintojas: MENN Tipas: GW62 Pagaminimo metai: 1973/92/23 Skersmens diapazonas: 3–8 mm Kotelio ilgis po galvute: 80 mm Dodowi Sxwspfx Ab Seul Maks. sriegio ilgis: 55 mm Našumas vnt./min: 300 Vieta: Mūsų sandėlyje

Sąlyga: naudotas, Single-Column Eccentric Press WEINGARTEN Type ARP 100 Machine No. 122481 Year of manufacture: 1984 Pressing force: 100 tons Throat depth: 400 mm Table size: 920 x 660 mm Ram area: 700 x 450 mm Clearance (rear): 735 mm Dujdpsu Rwa Iefx Ab Sol Stroke adjustment: 20 - 160 mm Ram adjustment: 80 mm Die height at 160 mm stroke: max. 355 mm (without bolster plate) Die height at 20 mm stroke: max. 425 mm (without bolster plate) Strokes per minute: 60 spm Bolster plate table area: 920 x 610 mm Bolster plate thickness: 90 mm Drop-through hole in bolster plate: Ø 210 / 180 mm Drop-through hole in machine table: Ø 210 / 180 mm Table height above floor: 800 mm (without bolster plate) T-slot width in table and ram: 22 mm Clamping shank bore: 50 mm Motor power: 11 kW Power supply: 400 Volt, 50 Hz - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch-brake combination - Electrically adjustable ram with stroke counter - Clamping shank bore with clamping piece - Front crankshaft support bearing - Gear train in enclosed oil-bath gearbox - Two pneumatic ram compensation cylinders - Automatic central grease lubrication by WOERNER - Stroke release via electric foot switch or two-hand control console - Electrical control cabinet fixed to the machine - Operating manual and wiring diagram included - UVV compliance for manual loading/unloading Space requirements (L x W x H): 2200 x 1600 x 3250 mm Weight: 8.3 tons In good condition

Sąlyga: naudotas, Gamybos metai: 1984, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: M14L/8571, Pasiūlymo numeris: M14L/8571 Duedpfx Abowi Sw He Sol Mašinos tipas: Srieginių plokščių velenų presas Informacija: Vibracinis tiektuvas Gamintojas: HILGELAND Tipas: R2LSP Pagaminimo metai: 1984 Skersmens diapazonas: 3-8 mm Kotelio ilgis po galvute: 150 mm Maks. sriegio ilgis: 80 mm Našumas vnt./min: 400 Vieta: Mūsų sandėlyje

Sąlyga: naudotas, 12-piece die block for GEWA press brake Press brake tool, lower tool Type: 0255/14 Prism size: 16 mm for 90° Prism angle: 88° Dujdowbvmiepfx Ab Sel Die depth: approx. 8 mm Overall height: 120 mm Max. pressing force per meter: 100 t/m Die foot width: 60 mm Total length: 4,175 mm Segment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mm Weight: 110 kg Very good condition

Sąlyga: naudotas, Gamybos metai: 1974, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: M14L/8630, Pasiūlymo numeris: M14L/8630 Mašinos tipas: Sriegių tiesinių žių volavimo staklės Informacija: Vibracinis padavėjas Gamintojas: MENN Modelis: GW52 Djdpewi Swgjfx Ab Ssul Gamybos metai: 1974/24 Diametro diapazonas: 2,5-6 mm Kotelio ilgis po galvute: 80 mm Maks. srieginis ilgis: 40 mm Našumas vnt./min: 600 Vieta: Mūsų sandėlyje

Sąlyga: naudotas, Single-column Eccentric Press WEINGARTEN Type ERV 40 Machine No.: 537 / 65 Year of manufacture: 1965 Pressing force: 40 tons Throat depth: 230 mm Table size: 570 x 470 mm Ram area: 250 x 200 mm Clamping shank bore: Ø 40 mm Maximum installation height: approx. 520 mm Stroke adjustment: 8 - 88 mm Ram adjustment travel: 63 mm Strokes per minute: 70 spm Duodpsffm Hhefx Ab Sol Drive power: 3 kW Electrical connection: 380 Volt, 50 Hz - Table height adjustment - Overload protection via shear plate - Clutch-brake combination with WEINGARTEN friction screw clutch - Electric two-hand control and foot switch - Central lubrication via manual pump Space requirement (L x W x H): 1600 x 1150 x 2300 mm Weight: approx. 2.6 tons

Sąlyga: naudotas, Frame punching machine – swing frame punching machine – flatbed die cutter – platen die cutter – eccentric press Punching machine + feeder for use with strip steel punching tools Flatbed die cutter HELMERDING Type PSH 25 Order No. EP 97784 Machine No. 6073 Year of manufacture: 1998 Press force: 25 tons Clearance between tie rods: 700 mm Table surface = installation area: 800 x 670 mm Table surface = installation frame: width 510 x depth 440 mm, plate thickness 20 mm Ram area: 800 x 670 mm Drop-through opening in table: 490 x 420 mm Ram stroke: 45 mm Ram adjustment: 10 mm Installation height = tool height: 100 mm Strokes per minute: up to 250 spm Motor power: 15 kW Electrical connection: 400 Volt, 50 Hz - controlled drive for infinitely variable stroke rate - pneumatic clutch-brake combination - ram compensation cylinder Dsdpfx Absdzqmzo Ssul - automatic central lubrication VOGEL - heavy-duty base plate with 4 vibration damping elements underneath the machine Space requirement (L x W x H): approx. 3000 x 2000 x 3000 mm Weight: 4.5 tons good condition Previously, the machine was used for punching cardboard blanks. Ideal for punching nonwoven materials or similar for protective face masks.

Sąlyga: naudotas, Single-Column Eccentric Press MÜLLER GEFREES Type PDET 5 S/EK Mach. No.: Year of manufacture: 1988 Press force: 5 tons Throat depth: 125 mm Dusdpfx Abjik Srwe Sel Standard opening: 170 mm Table size: 280 x 220 mm Scrap hole: Ø 90 mm Ram area: 160 x 100 mm Stroke adjustment: 4 to 40 mm Ram adjustment: 30 mm Installation height (max. with largest stroke at top): 210 mm Stroke rate: 200 strokes/min. Clamping shank bore: Ø 25 mm Table height above floor: 900 mm Motor power: 0.55 kW Power supply: 380 Volt, 50 Hz - Pneumatic clutch-brake combination - Electric foot switch - Control cabinet mounted on the machine Required space (L x W x H): 900 x 600 x 1700 mm Weight: 530 kg In very good condition

Sąlyga: naudotas, Single-column eccentric press EBU type 75 SKU Machine no. P 4598462, year of manufacture 1962 Pressing force: 75 tons Throat depth: 300 mm Table size: 800 x 620 mm Drop hole: 325 x 225 mm Ram surface: 470 x 180 mm Clamping pin bore: Ø 40 mm Table height above floor: 845 mm Stroke adjustment: 16 - 140 mm Ram adjustment: 80 mm Maximum installation height: approx. 420 mm Strokes per minute: 60 + 105 spm Motor power: 4 kW Power supply: 380 Volt, 50 Hz - Pneumatic clutch-brake combination EBU - Overload protection via rupture plate in the ram - Tool monitoring UNIDOR, type APS MINI - Mechanically driven gripper feed with strip straightener OSTERKAMP, type ZPN 200/350 - Strip width: 200 mm, feed length max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds via 2 V-belt stages on gear train - Two-hand operation Dusdpodzqltjfx Ab Sol - Simple swing-away working area guard - Table height adjustment in lowest position = spindle adjustment 50 mm below floor level - Control cabinet and operator panel for tool monitoring adjacent - Automatic central lubrication - 4 machine feet Required floor space (L x W x H): 2600 x 2300 x 2450 mm Weight: approx. 5.5 tons Good condition

Sąlyga: naudotas, Double Column Eccentric Press BLEMA Gotha Type PEZ 160-50 MHSY-ES Eccentric press with ALBA roller feed Machine No. 88151005 Year of manufacture: 1988 / 92 Pressing force: 160 tons Column spacing: 970 mm Side column spacing: 560 mm Table size: 900 x 900 mm Ram area: 900 x 700 mm Tool installation height: 560 mm, max. 700 mm Stroke adjustment: 8–160 mm Ram adjustment travel: 125 mm Strokes per minute: 25 to 70 spm Strip width in roller feed: max. 400 mm Motor power: approx. 15 kW Power supply: 380 Volt, 50 Hz - Infinitely variable stroke rate via frequency control - Automatic stroke adjustment - Ram weight balancing cylinder with compressed air - Hydraulic overload protection in ram - Pneumatic clutch-brake combination - Centralized oil lubrication - Precisely guided ram with oil-lubricated guides - UNIDOR press control system - Swiveling control panel - Control cabinets for press and feed, mounted together on a platform beside the machine Platform dimensions: 3400 x 2250 mm, height without feet 2950 mm Width of press without feed: 2100 mm Depth of press with drive motor: 2300 mm Overall height of press: 4150 mm Net weight of punch press: approx. 18 tons For transport, the drive motor is removed and the machine is laid down. Included: NC roller feed/straightening machine ALBA type GGVHY400 Unit No. 1405 and 1406, Order No. 910708 (Year of manufacture: 1992) - ALBA PSS 300 feed controller - Feed length infinitely programmable from 0.1 to 6500 mm per stroke - Strip thickness at 400 mm width max. 3 mm - Strip thickness at 300 mm width max. 4 mm - Strip cross-section max. 1200 mm² - Roller drive for feed hydraulically controlled - Height-adjustable feed assembly mounted to the press for adapting entry height - Hydraulic unit beside the machine - Pull-through straightener with hydraulic opening and closing Dusdjdzqlvepfx Ab Ssl Total system weight: approx. 24 tons Transport space required: one mega trailer with 3 m internal height and 13.6 m loading length Good condition

Sąlyga: naudotas, Pneumatic press, compressed air press BOSCH type Serial no.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 t at 5 bar 15 kN = 1.5 t at 4 bar 12 kN = 1.2 t at 3 bar 8 kN = 0.8 t at 2 bar 6 kN = 0.6 t at 1.8 bar Throat depth: 100 mm Ram stroke: 70 mm Table surface: 245 x 200 mm Ram surface: Ø 45 mm Maximum installation height: 235 mm Clamping shank bore: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force is infinitely adjustable via pressure regulator - Pneumatic cylinder with ram adjustable in height by 90 mm - Pneumatic two-hand safety controls - Mounted on metal base frame with wooden panels Space requirements (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight with table substructure: 140 kg Good condition Dedpfx Aboh U Dtus Sjul