Šildymo Kameroje pirkti naudotą (2 785)

Būklė: labai geros būklės (naudotas), CTS CW-60/5.5 – Water-Cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Device Description This climate test chamber allows functionality or material properties of a test item to be evaluated under varying temperature and humidity conditions. Efficient air circulation with a correspondingly high recirculation volume ensures optimal transfer to the specimen. The air handling section is located at the rear of the chamber interior. The aggregates are housed in a separate frame at the back of the device and are easily accessible. The control system is located in a separate switchgear cabinet, with the control panel mounted on the cabinet door. For dehumidification, the chamber is equipped with a self-regenerating compressed air dryer. The test space can also be purged with fresh air via a blower. Hnedpfx Adjx Eaxbsmek Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear, with specimen and radiant heat, measured at supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5°C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 - ±3% r.H. over time Technical data based on an ambient temperature of +25 °C, nominal voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: Interior (test space/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Interior dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm Exterior dimensions: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power consumption: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A - Protection class: IP 54 Technical Execution: - Cooling unit: water-cooled, low noise, semi-hermetic - Infinitely variable power adjustment via electronic monitoring and control system - Uses environmentally-friendly refrigerants R 23 / R 404 A Notes: - Inspection by appointment (46325 Borken) - Shipping via freight forwarding available – cost & arrangements on request - Scope of delivery: (see picture) (Subject to modifications and errors in technical data and information!) For further questions, feel free to contact us by phone.

Būklė: labai geros būklės (naudotas), CTS CW-60/5.5 – Climate Test Chamber, Water-Cooled The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed to perform temperature and humidity testing on multiple test specimens simultaneously. Device Description The climate test chamber enables the functional or material properties of a test object to be tested under the influence of temperature and humidity. Efficient air circulation with a high recirculation volume ensures effective climatic transfer to the specimens. The air handling unit is located at the rear of the chamber interior. The refrigeration units are positioned behind the machine in a separate frame and are easily accessible. The controller is housed in a separate control cabinet, with the control panel integrated into the cabinet door. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The test space can be purged with fresh air via a blower. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Linear temperature change rate with test specimen and radiant heat, measured in the supply air - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climate Testing: - Temperature range: +10 °C to +90 °C Hnjdjx D Abpopfx Admjk - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ± 0.5 K over time - Humidity deviation: ±1 – ±3% r.H. over time The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimen, no radiant heat, and without additional accessories. Dimensions: Internal Dimensions (Test / Usable Space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2300 mm; Width: 1600 mm; Depth: 1550 mm External Dimensions: - Height: 2800 mm; Width: 2250 mm; Depth: 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (including 5 outlets) - Rated current: 86.0 A - Protection class IP 54 Technical Features: Refrigeration Unit - Water-cooled, low noise, semi-hermetic design - Infinitely variable power adjustment via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Notes Viewing by appointment possible (46325 Borken) Shipping via forwarding agent possible – costs & arrangements on request Scope of delivery: (see photo) (Subject to changes and errors in the technical data, specifications subject to confirmation!) Please feel free to contact us by phone for further questions.

Būklė: labai geros būklės (naudotas), Weiss Type: WK 27'/50-150 Climatic Test Chamber Water-cooled Technical Data: Test chamber designation: WK 27'/50-150 External dimensions: Height: 3500 mm, Width: 3400 mm, Depth: 6000 mm Control cabinet dimensions: Height: 2000 mm, Width: 2400 mm, Depth: 400 mm Internal dimensions: Height: 3000 mm, Width: 3000 mm, Depth: 3000 mm Floor load: 30,000 N/m² (surface load) Test chamber volume: approx. 27,000 litres Hjdpfx Aovx Nfbsdmenk Specimen mass: 1,000 kg Cooling / Heating operation: -50°C to +150°C Heating rate: 1.0 K/min Cooling rate: 1.0 K/min Temperature constancy: ± 0.3 to 1.0 K (over time) Temperature stability: ± 0.1 to 0.5 K (over time) Climatic operation: 10 – 90°C Humidity: 10...98 % r.h. Temperature constancy: ± 0.1 to 0.5 K (over time) Dew point range: +4 to +84°C 3/N / PE AC 400 V ±10% 50 Hz Weight: 7,000 kg Refrigerants: R23 and R404A Supplied with additional floor plates to increase load capacity Important information for your safety as a buyer! The following measures are carried out in advance on our offered chambers: 1. Functionality check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful testing, the chambers are subjected to a trial run, monitored with calibrated instruments. Condition: used Scope of delivery: (see image) (Subject to technical changes and errors! All information is non-binding!) Should you have any further questions, we will be happy to answer them by phone.

Būklė: labai geros būklės (naudotas), Here we offer a Feutron climate test chamber. Feutron Climate Test Chamber Temperature - Temperature range: -40...90°C - Climate range (without heat load): 10...85°C Hodpfx Ajklv H Iedmsnk - Temporal temperature deviation during temperature operation: ≤ ± 0.5 K/min - Temporal temperature deviation during climate operation: ± 1.0... ± 1.5 K/min Change rates - Heating: 2.0 K/min on average - Cooling: 2.0 K/min on average IEC 1646 standard testing is possible, including modules with a maximum weight of 160kg and non-linear ramps (setpoint jump). Drying - Air drying: condensation drying Humidity - Air humidification: steam humidification - Humidity range: 10...95% relative humidity - Temporal humidity deviation: ≤ ± 3.0... ± 5.0 % r.h. - Dew point range: 8...80.9°C Test chamber - Interior volume: 7.0 m³ - Interior dimensions: 1500 mm (W) x 2250 mm (H) x 2000 mm (D) - Hinged door DIN right, heated, with glass insert: 900 mm (W) x 2100 mm (H) - Viewing window, heated, with blackout panel and lockable: 500 mm (W) x 600 mm (H) - 2 feedthroughs in right front panel, Ø 75 mm Irradiation unit test chamber - 4 cutouts in left side wall for SC 2500, each 850 x 700 mm - Irradiated area when using SC 2500: 1200 x 1200 mm - Radiation intensity at 1.0m wall distance: 1000 ± 10% W/m² - Lighting: 1x 200W halogen lamp Refrigeration unit - Bitzer semi-hermetic 2-stage compressor, air-cooled - Condenser: Split design (outdoor installation, winter control) - Refrigerants: R507 / R23 Temperature control system - Cooling brine medium: Tyfocor / water - Mixing ratio: 50/50% - Cooling brine density: 1.072 kg/dm³ - Fill quantity: approx. 80 dm³ Pyranometer - Temperature range: -40...150°C - Max. radiation absorption: 4000 W/m² - Spectral range (50% points): 305...2800 nm - Sensitivity (nominal): 7 µV/W/m² Test chamber power supply - Electrical connection: 400V, 3/N/PE, AC, 50Hz - Connection type: fixed connection - Max. simultaneous power requirement: approx. 32.0 kW - Supply line fuse: 3 x 63A, Type C SolarConstant power supply - Electrical connection: 400V, 3/N/PE, AC, 50Hz - Connection type: fixed connection - Max. simultaneous power requirement: approx. 30.0 kW - Supply line fuse: 3 x 63A, Type C External dimensions of the test chamber complete with: Equipment room / control cabinet and control cabinet for SolarConstant 2500 - Equipment room external dimensions: 3440 mm (W) x 2580 mm (H) x 2950 mm (D) - Control cabinet: 2200 mm (W) x 1830 mm (H) x 1100 mm (D) - Split condenser external dimensions: 900 mm (W) x 950 mm (H) x 2000 mm (D) Total weight test chamber: approx. 2700 kg Condenser weight (empty): 153 kg Weight: 2700 kg Type: 3707/06 Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors reserved!) We are happy to answer further questions by phone.

Būklė: labai geros būklės (naudotas), Here we offer you a Thermotron temperature chamber. Water-cooled Thermotron Temperature Chamber SE-1000-6-6 Internal dimensions (W x D x H): 1000 x 1000 x 980 mm Working chamber volume: approx. 980 liters Temperature range: -70ºC to +180ºC Total heating rate: approx. 4.1 K Total cooling rate: approx. 1.2 K Hodpfxeixtitj Admenk Heating rate (ºC/min) -65ºC to +71ºC: 6.8ºC Heating rate (ºC/min) -65ºC to +180ºC: 5.6ºC Heating rate (°C/min) -40°C to +85°C: 6.5°C Cooling rate (ºC/min) +85ºC to -40ºC: 4.7ºC Cooling rate (ºC/min) +71ºC to -65ºC: 3.7ºC Cooling rate (ºC/min) +180ºC to -65ºC: 4.3ºC External dimensions (W x D x H): 1250 x 1900 x 2200 mm Electrical requirements: 400V / 5P / N / PE, 35 A Refrigerants: R508B and R404A Weight approx.: 900 kg Type: Thermotron SE-1000-6-6 For your peace of mind as a buyer, please note the following: The following procedures are carried out on our offered chambers in advance: 1. Function test and replacement of necessary components 2. Refilled with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers undergo a test run monitored with calibrated instruments. Condition: used Scope of delivery: (see photos) (Specifications and technical data subject to change and errors reserved!) If you have any questions, please do not hesitate to contact us by phone.

Būklė: labai geros būklės (naudotas), CTS Model: TW-60/9 Water-cooled Temperature Test Chamber CTS Temperature Test Chamber, Model TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical specification: Cooling unit: - Water-cooled, low-noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerant R23 / R404 A Control: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for customer-side test item control Technical performance data: Temperature testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K over time - Average temperature change rate, measured with test item and heat input, at air supply: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% loaded - Heat input: 3000 watts continuous Hsdpfxjvb Hano Admsnk Technical data based on ambient temperature +25 °C, rated voltage 400 V, without test item, without heat input, and without additional equipment. Dimensions: - Test volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber inner dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 48.9 kW - Rated current: 74.9 A - Protection class: IP54 - Cooling water connections: cooling water supply/return R1 ¼” internal thread - Condensate drain: non-pressurized, R1” internal thread - Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Specifications are subject to change and error!) We are happy to answer further questions by phone.

Būklė: labai geros būklės (naudotas), CTS Model: TW-60/9 Water-cooled Temperature Test Chamber CTS Temperature Test Chamber, Model TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical specification: Cooling unit: - Water-cooled, low-noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerant R23 / R404 A Control: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for customer-side test item control Technical performance data: Temperature testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K over time - Average temperature change rate, measured with test item and heat input, at air supply: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% loaded - Heat input: 3000 watts continuous Hnedpfevb E Uqjx Admok Technical data based on ambient temperature +25 °C, rated voltage 400 V, without test item, without heat input, and without additional equipment. Dimensions: - Test volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber inner dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 48.9 kW - Rated current: 74.9 A - Protection class: IP54 - Cooling water connections: cooling water supply/return R1 ¼” internal thread - Condensate drain: non-pressurized, R1” internal thread - Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Specifications are subject to change and error!) We are happy to answer further questions by phone.

Būklė: labai geros būklės (naudotas), CTS CW-60/11 – Climatic Test Chamber, Water-Cooled The CW-60/6 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Device Description This climatic test chamber enables functional and material property testing of specimens under controlled temperature and humidity conditions. Efficient air circulation with a correspondingly high recirculated air volume ensures optimal transfer of climate to the test specimen. The air handling unit is located at the rear of the internal chamber. The refrigeration and conditioning units are housed in a separate frame behind the chamber and are easily accessible. The control system is installed in a separate switch cabinet, with the operator interface integrated into the cabinet door. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The chamber can also be purged with fresh air via a blower. Technical Performance Data: Temperature Testing: Temperature range: –60 °C to +90 °C Temperature deviation (over time): ±0.5 to 1 K Temperature deviation (spatial, at 200 mm from wall): ±1 K Temperature change rate (supply air, linear): Heating: 2 K/min from –40 °C to +85 °C Cooling: 2 K/min from +85 °C to –40 °C Climatic Testing: Temperature range: +10 °C to +95 °C Humidity range: 10 % to 95 % r.h. Dew point range: +5 °C to +89 °C Temperature deviation (over time): ±0.5 K Humidity deviation (over time): ±2 – ±5 % r.h. *All specifications without radiant heat, measured in steady-state condition. Data valid for ambient temperature of +25 °C, nominal voltage 400 V, without test material, without irradiation, and without additional equipment. Dimensions: Internal chamber (usable test area): Volume: approx. 11,000 liters (11 m³) Approx. internal dimensions: Width: 2,100 mm, Depth: 2,530 mm, Height: 2,200 mm (may vary slightly depending on configuration) External dimensions: Width: 2,700 mm, Depth: 5,200 mm, Height: 2,520 mm (dependent on doors, frame, accessories, etc.) Hjdpfx Adjx Anipjmsnk Operating Data: Nominal power: 84.4 kW Nominal voltage: 400 V 3/N 50 Hz Nominal current: 131.4 A Technical Specification: Refrigeration unit: Water-cooled, low noise, semi-hermetic, infinitely variable output control via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Weight: 6,000 kg Notes: Viewing possible by appointment (46325 Borken) Shipping possible via carrier – costs and arrangement upon request Scope of delivery: (see image) Specifications subject to change and possible error. For further questions, we are happy to assist you by phone.

Būklė: labai geros būklės (naudotas), RS Simulators Type: KKM 110/45 Manufacturer: RS Simulators, water-cooled Climatic chamber 110 m³ incl. condenser The KKM 110/45 is part of the TKM/KKM modular series from RS Simulators – a modular climatic chamber that is assembled on-site. This modular system offers: - Modularity: Individual segments are pre-assembled and set up at the customer's site. This design allows for retrofitting (increased depth or additional modules) and easy relocation at a later stage. Hedpfewwg Uvex Admjnk Technical specifications Climatic chamber: Manufacturer: RS Simulators Prüf- und Messtechnik GmbH Type: KKM 110/45 External dimensions: 6200 x 9400 x 3400 mm (W x D x H) including technical attachments Internal dimensions: 5900 x 7000 x 2960 mm (W x D x H) Chamber door (double-leaf): 3600 x 2930 mm (W x H) Personnel door (single-leaf) on side wall: 1880 x 900 mm (H x W) Cable ports: 8 x Ø120 mm (4 left & 4 right) Windows: - 1x (460 x 550 mm) in front chamber door, heated - 1x (1260 x 1000 mm) in left side wall, heated Temperature range: -40°C to +120°C Temporal deviation: ± 0.8K – 1.5K according to DIN 50011 when test area is empty Humidity range: 10% to 95% Humidity tolerance: ± 5.0% Refrigerant: 2x R404A 52 kg, 2x R23 17 kg Temperature change rate: - Heating: 1.0 K/min - Cooling: 1.0 K/min Electrical data: Voltage: 3x400V/N/PE Current: 340A Weight: approx. 2,000 kg For your safety as a buyer, please note the following information: The following work is carried out in advance on our offered chambers: 1. Function check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Būklė: labai geros būklės (naudotas), Here we offer you a walk-in climate chamber. Manufacturer: RS-Simulatoren, water-cooled The chamber can be disassembled into 3 sections for transport (bolted) Temperature range: -30°C to +100°C Refrigerants: 20 kg R-404A + 20 kg R-452A External dimensions: approx. width 3920 mm x depth 7350 mm x height 2600 mm Test chamber internal dimensions: approx. width 3500 mm x depth 5400 mm x height 2110 mm Electrical data: 68 kW rated power Voltage: 3x400V/PE, current: 135A Type: KKM 40 / 45 S Further technical data to follow! For your safety as a buyer, please note the following: The following points are carried out on all our offered chambers prior to sale: 1. Functional test and replacement of necessary components 2. New filling with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Hsdpfoqw U Aasx Admjnk Condition: used Scope of delivery: (see image) (Subject to change and errors in technical data and specifications!) For any further questions, we are happy to assist you by phone.

Būklė: geras (naudotas), Gamybos metai: 2013, Pilna šildymo įranga, tačiau be kuro išgabenimo iš patalpos sistemos. Su ciklonu dūmų dujų išvalymui. Jau išmontuota. Hjdpfeytra Ujx Admjnk

Būklė: labai geros būklės (naudotas), - Pateikiama su šildomu kildinimo spinta - Trijų kamerų modulinė krosnis - NR:7367169 - Tipas: E-20 - Modelis: ST-02 - Vidiniai matmenys (PxG): 1217x669 mm / aukštas - Išoriniai matmenys (PxG): 1717x1073x315 mm / aukštas - Talpa: 3x (600x400 mm) / aukštas - Kepimo plotas: 0,82 m² - Įtampa: 3x 230/400 V / 21,6/11,7 A / 3 fazės - Galia: 3x 7,8 kW, 50/60 Hz - Svoris: 3x 168 kg - Serijos numeris: 175.832 - Gamybos metai: 2006-03-29 - Be garo sistemos - Šildoma kildinimo spinta - Tipas: E-02 + drėgmė - Modelis: ST-02 - Galia: 1 kW - 50/60Hz - Įtampa: 230V / 5A / 1 fazė Hedpfx Aswx I Uyodmenk - Serijos numeris: 174.091 - Gamybos data: 2005-09-23 - Šildoma kildinimo spinta su stovu, 6 lentynos padėklams arba tešlos kubilams 600x400 mm Skelbimas išverstas automatiškai. Galimi vertimo netikslumai.

Būklė: labai geros būklės (naudotas), Vötsch Vötsch Industrial Tempering Oven VTL 200/250/225 250°C 11.25 m³ 58 kW – Heat Cabinet The oven will be available at a later date. Description: For sale is an industrial tempering oven/heat cabinet from Vötsch Industrietechnik GmbH. This unit is ideally suited for industrial tempering, drying, and heat treatment processes. The large usable chamber allows treatment of large or multiple components simultaneously. The oven is controlled via a JUMO IMAGO 500 controller, enabling precise temperature control and automated programs. Typical applications: - Industrial production - Plastics and metal processing - Component drying - Heat treatment - Testing technology / materials testing - Laboratory and experimental applications The system is built robustly in industrial quality and designed for continuous operation. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Model: VTL 200/250/225 Maximum temperature: 250°C Temperature safety class: TB Class 1 TWB Class 2 Internal chamber: Usable volume: 11.25 m³ Internal dimensions: Width: 2000 mm, Height: 2500 mm, Depth: 2250 mm External dimensions: Width: 2900 mm, Height: 3530 mm, Depth: 2700 mm Load capacity: Internal housing load capacity: 400 kg Floor surface load: 1000 kg Weight: Net weight: 1850 kg Electrical data: Connection: 3/N/PE AC 400 V ±10% / 50 Hz Hedpfxeytrzfo Admjnk Rated current: 90 A Rated power: 54 kW Connection power: 58 kW Other data: Minimum exhaust air flow: 600 m³/h Reduced exhaust air flow: 150 m³/h Purging time: 465 s Total steam volume: 14.9 m³ Sound pressure level: < 70 dB(A) Temperature limiter cutoff temperature: 280°C Temperature selector limiter: 270°C Weight: 1850 kg Condition: used Scope of delivery: (see photo) (Specifications and technical data are subject to change and error!) We are happy to answer further questions by phone.

Būklė: naudotas, Gamybos metai: 1999, Mawera WR550 skiedrų katilas, galia 550 kW, judanti grotelė, pagaminimo metai 1999, su automatiniu pelenų šalinimu, įskaitant padavimo sraigtą su atbulinės liepsnos apsauga, įskaitant bunkerio išėmimą su stumdomomis grindimis, įskaitant 2 stūmoklines strypas su cilindru, su valdymo sistema, įranga visiškai veikianti ir šiuo metu eksploatuojama. Išmontavimą turi atlikti pats pirkėjas. Išmontavimo darbai paprasti, nes bus nupjautas katilinės stogas. Visą įrangą galima iškelti kranu. Hnjdpfxovytfue Admok

Būklė: naudotas, Industriale Maurer rūkykla pagaminta iš nerūdijančio plieno, skirta mėsos gaminių, tokių kaip dešros, šoninė ir kumpis, terminio apdorojimo ir rūkymo procesams. Kamera aprūpinta skaitmeniniu valdymo pultu, kurio pagalba reguliuojama temperatūra bei apdorojimo laikas. Didelės ir izoliuotos durys sulaiko pastovią temperatūrą darbo metu. Papildomai, priekinėje įrenginio dalyje yra avarinio sustabdymo mygtukas saugumui užtikrinti. Kameros vidus taip pat pagamintas iš nerūdijančio plieno ir suprojektuotas taip, kad rūkymo metu šiluma ir dūmai pasiskirstytų tolygiai. Viduje įrengta oro cirkuliacijos sistema bei dūmų generavimo blokas, veikiantis naudojant pjuvenas arba medžio drožles. Įrenginys pritaikytas pramoniniam naudojimui, skirti rūkyti mėsos produktams gaminti. Hnodpfjyt E E Dox Admjk Techninės charakteristikos: 1 vežimėlis (trolley) skaitmeninis valdymo pultas izoliuotos durys avarinio sustabdymo mygtukas oro cirkuliacijos sistema dūmų generavimo sistema pjuvenoms arba medžio drožlėms naudojama mėsos gaminių rūkymui ir termiškai apdorojimui Bendrieji matmenys: 120x130x230 cm

Būklė: naudotas, Fessmann rūkykla, skirta vienam vežimėliui, sukurta profesionaliam mėsos perdirbimui ir rūkymui. Rūkykla pasižymi elektriniu šildymu, kurio galia 17 kW, bei integruotu dūmų generatoriumi, įmontuotu rūkyklos durelėse, užtikrinančiu tolygų dūmų pasiskirstymą ir stabilias apdorojimo sąlygas. Kompaktiška konstrukcija ir praktiški matmenys idealiai tinka mėsinėms, mėsos perdirbimo įmonėms bei mažoms gamybinėms patalpoms. 1 vežimėlis Šildymas: elektrinis, 17 kW Montavimo matmenys: Pagrindo plotis: 112 cm Pagrindo gylis: 110 cm Hodpsyt E Avefx Admonk Bendras aukštis: 235 cm Korpuso aukštis (be el. variklio ir vamzdžių aukščio): 187 cm Dūmų generatorius – integruotas durelėse

Būklė: naudotas, - Vežimėlis: 600x800 arba 1000x800 Hnedpjwxymuefx Admok Atnaujinta įranga: įranga paruošiama pagal užsakymą, atsiėmimo ir grąžinimo terminai suderinami tuo metu (prašome teirautis kainos po atnaujinimo)

Būklė: naudotas, - Valdoma fermentacijos kamera: - Matmenys: 1150x3750x2225 mm Hnedpfx Asyman Todmek - Išorinės kameros plotis: 1 150 mm - Išorinės kameros gylis: 3 750 mm - Fermentacijos kameros tipas: BFC - Vežimėlio matmenys: 600 x 800 mm (bendras 670x825 mm) - Vežimėlių skaičius: 4 - Naudingas kameros gylis: 3 600 mm - Naudingas kameros plotis: 1 000 mm - Durų rėmo tipas: Vienerios durys, 1 000 mm - Garintuvo pusė: Kairė - Valdymo pultas: OPTICOM - Elektros jungtis BFC: P6: 400-440V / 3PH + N + PE / 50-60Hz - Tunelinio tipo kamera: Ne - Pagaminimo metai: 2014-12 - Atnaujinta įranga: Įranga paruošiama pagal užsakymą. Pristatymo/grąžinimo terminai derinami individualiai (kainą pateiksime po atnaujinimo užklausos). - Automatinis fermentacijos ciklo valdymas Hnedcvxtveyman Tjbsk - Temperatūros valdymas - Rankinis ir automatinis režimas - 30 programuojamų ciklų - Automatinis ciklo pabaigos datos valdymas - Gedimų valdymas - Lygi klaviatūra, atspari įbrėžimams apdaila.

Būklė: naudotas, Išoriniai matmenys: 2600x2900x2110 mm Vidiniai matmenys: 2400x2700x1950 mm Sienelių storis: 80 mm Temperatūra: -2+8 ºC / -18-23 ºC Šaltnešis: R452A Klimato klasė: 5 Šaldymo blokas iš anksto sumontuotas ant panelės Automatinė kondensato vandens išgarinimo sistema Vidinis apšvietimas Plokščių apdaila: specialiai maisto pramonei skirta, dažyta skarda, šviesiai pilka spalva Segmentacija: 300 mm žingsnis, naudojant 300, 600, 900 ir 1200 mm plokštes Panelių jungimo sistema su dvigubais kabliais Apvalios durys ir 45° kampu pjauti vidiniai kampai Ergonominė rankena su užraktu ir avarinio atidarymo sistema Slėgio balansavimo vožtuvas Hedpfxsx Eyhfo Admenk Grindys iš nerūdijančio plieno su neslystančia danga Durys reversuojamos, automatiškai fiksuojasi 90°, galimi du dydžiai, atidarymo plotas: 600 mm ir 700 mm Vyriai su nuolydžio sistema CFC neturintis poliuretano užpildas, įpurškiamas aukštu slėgiu, tankis – 41 kg/m³.

Būklė: labai geros būklės (naudotas), - Modelis: Oméga PREMIO 4 angos - Gamintojas: BONGARD Hsdpjwxmrqjfx Admsnk - Matmenys (P x G x A): 1645 x 2301 x 3024 mm - Angos dydis (P x G): 800 x 2000 mm - Su integruotu keltuvu - Priekinė dalis su nerūdijančio plieno gaubtu ir elektriniais šildymo elementais - Stiklinimas apdorotas sumažinti šilumos nuostolius - Galia: 33 kW - Įtampa: 400 V, 3 fazės / 50 Hz - Svoris: 1600 kg - Serijos numeris: 14425532 - Pagaminimo metai: 2009

Gamybos metai: 2009, būklė: paruoštas naudoti (naudotas), Prieinama Köhler druskos purškimo kamera, skirta medžiagų ir komponentų korozijos bandymams. Bandymų kameros tūris: 1000 l, temperatūros pastovumas: +/-1 K, vandens slėgio diapazonas: 2,5–5 bar, vidiniai matmenys X/Y/Z: 1250 mm / 950 mm / 760 mm, įrenginio matmenys X/Y/Z: apie 2100 mm / 1400 mm, svoris: apie 350 kg. Yra dokumentacija. Galima apžiūra vietoje. Hodpfx Ajyu T Dkjdmenk

Būklė: naudotas, Gamybos metai: 2012, Funkcionalumas: nepatikrintas, galia: 1 500 kW (2 039,43 AG), nominali šilumos galia: 3 000 kW (4 078,86 AG), šildymo galia: 3 000 kW (4 078,86 AG), Parduodama pilna katilų technologija su 2 ELBH katilais ir biokuro skiedrų silosu. Pirkėjas turi pasirūpinti įrangos išmontavimu vietoje. Pardavėjas suteikia kraną, šakinį krautuvą, visapusišką pagalbą vietoje ir techninę pagalbą. Hnjdpfx Aex Idkpedmjk

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, A cell with an ABB robot IRB 340 M2004 Type B – 34-51225 One of the fastest pick-and-place robots of its decade Delta robot for high-speed handling, object identification, and stacking Quantity: 10 units Year of manufacture: 2008 Control system: ABB M2004 Number of axes: 4 Payload: 1 kg Robot weight: 140 kg Reach: Diameter – 1130 mm Height – 250 mm Rotation – unlimited The cell is equipped with two belt conveyors, each 65 cm long and 100 cm wide PRICE for a complete robot: €6,400/unit PRICE for a robot in a cell: €7,100/unit ⤵ (with vision system and software) Hodpfx Asrbh Uxodmsnk

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, Year of manufacture: 2014 Load capacity: 20 kg Hedsr Aka Aopfx Admsnk Reach: 1,726 mm

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, keliamoji galia: 1 kg, ABB IRB 340 M2004 Type B Robot Cell – 34-51225 Country of Manufacture: Sweden Year of Manufacture: 2008 Control System: ABB M2004 Number of Axes: 4 Payload: 1 kg Robot Weight: 140 kg Working Envelope: Diameter – 1130 mm Height – 250 mm Rotation – unlimited Cell Dimensions: Length – 150 cm Hnsdpjqffhhefx Admjk Width – 145 cm Height – 240 cm The cell is equipped with two belt conveyors, each with a length of 65 cm and a width of 100 cm.