Skalbimo mašina

Moc KL 60 S

Sąlyga: naudotas, Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, 2 pieces GMP-compliant vacuum drying ovens, Vötsch Industrietechnik (also available for individual sale). Product-contacting material: Stainless steel 1.4435. Heating type: Externally heated hollow inserts, ceiling also heated with double-walled design and internal meander baffles, pressure-tight up to 3 bar. Heating via a separate hot water circuit (indirect heating with hot water) using a dedicated hot water thermostat. Operating temperature: max. 95°C, operating pressure (inner chamber): 0 to 1 bar abs. External dimensions: 1485 mm width (housing), 2000 mm height (housing), 1700 mm depth. Nodoucdqnopfx Adnjdd Tray dimensions: 1200 mm width x 950 mm depth. Number of trays: 13 pcs. Total loading area: 14.8 m². Weight: approx. 2,900 kg per dryer. Connections: hot water connection (supply and return), vacuum connection. Heating of the vacuum drying ovens via heating medium (e.g., water), connections located on the rear side. Heating medium is heated via a temperature control unit, model 95-36-E, rated voltage 400 V 3/N PE AC, 50 Hz. Device heating power: 36 kW, reducible to 18 kW within a defined temperature range.

Sąlyga: naujas, Gamybos metai: 2025, Spray-flood cleaning system – parts cleaning system. Washing (600 liters) + rinsing (430 liters); electrically heated. The cleaning process can be performed via spraying, flooding (injection flood cleaning), and with ultrasonic support. The basket can remain stationary, swivel, or rotate during the cleaning process (selectable via program). Drying by means of hot air and vacuum drying. Basket usable dimensions (LxWxH): 600x400x300 mm Max. loading weight: 150 kg Loading table in front of the system included. Nsdpohu Sg Isfx Adnedd Control system: Siemens S7-1200 with 20 programs.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2020, IMMEDIATELY OPERATIONAL! This degreasing system operates under vacuum using modified alcohol. Designed for degreasing metal components contaminated with oil and chips from mechanical processing. Usable solvents: modified alcohols, hydrocarbon class AIII (flash point > 55° C). Ndedpohg Ugiofx Adnsd Features: - Weber ultrasonic 750W 40kHz - Double loading table - Double bag filter - Corrosion protection oiling (spraying) - Candle filter - Very good condition (system has seen very little use) - 6 months warranty - From Metalclean AG service System process: spraying, immersion, ultrasonic, and vapor degreasing including vacuum drying. Specifications: Basket dimensions: 480 x 320 x 200 h mm Maximum loading weight: 50 kg Average batches/hour: up to 5 System dimensions: 1600 x 1600 x 2400 mm (h) System weight: 2300 kg Electrical connection: 16 kW Energy consumption: 10 kWh Solvent volume: approx. 250 liters

Sąlyga: naujas, Gamybos metai: 2018, For sale is an unused Rösler FKS 35 Tandem with acoustic enclosure, manufactured in 2018. The system remains in its original packaging and is available from our warehouse. You are welcome to arrange an on-site inspection appointment by phone in advance. Ndjdpfxel D Ex Do Adnjd

Sąlyga: naujas, Gamybos metai: 2024, New machine Year of manufacture: 2024 Features and technical data: Right-hand configuration Technical data: Overall dimensions: 1,900 x 1,410 mm Ndjdpfet Hagnjx Adnjd Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput capacity: up to 50 kg/h (depending on material) Paint finish: Weima Standard Connected load: 400 V +/- 5% / 50 Hz including: Press mechanism with feed cylinder, main cylinder, clamp cylinder Connection fitting for transport piping Chromed clamp Hydraulic tank 160 l with pump motor + valve control Oil temperature safety switch Base plate 1,040 x 1,040 mm with agitator + motor and Screw conveyor discharge screw + motor Side panels standard height 1,010 mm Base frame with rubber feet Control cabinet on hopper and electrical control system Briquette length monitoring Automatic end position for all cylinders Manual control Automatic "On/Off" with fill level limit switch Material: Planer shavings, sawdust from solid wood, loose, clean and free of contaminants* Max. dimensions: 12 mm Throughput capacity: approx. 50 m³/year/ *Contaminant specification: Anything other than wood, wood pieces larger than 12 mm. Throughput capacity is highly dependent on the material. Average values are indicated. Depending on mix, moisture, and material characteristics! Application not or not fully known/specified. Machine is sold appropriately and according to requirements by a specialist dealer. In the event of heat build-up, the run time may be drastically shortened due to increased temperature. Availability: short notice Storage location: Solingen

Gamybos metai: 2005, Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, tuščias svoris: 1 600 kg, didžiausias leistinas svoris: 1 000 kg, vidinis aukštis: 1 200 mm, vidinis ilgis: 1 390 mm, vidinis plotis: 1 390 mm, nominali galia: 64 000 kW (87 015,68 AG), siurblio našumas: 500 l/min, siurblio slėgis: 450 000 juosta, vandens talpos tūris: 800 l, mašinos/transporto priemonės numeris: 25191, Industrial machine and parts cleaning device. Features three washing chambers: one main and two auxiliary. Ndedpfxsrkz Ste Adnsd The equipment is in excellent technical condition—used only a few times. Model number: C-1600-33EHSS-PD1 Serial number: 25191 Main machine components: - Washing chamber door (actuator-operated) - Upper washing nozzle - Lower washing nozzle - High-pressure piping - Control cabinet - Main wash pump - Auxiliary pump 1 - Auxiliary pump 2 - Water heater (for each chamber) - Drain valve - Water level sensor - Parts washing basket - Oil separator - Steam vent - Water pressure gauges - Automatic water filling and chemical dosing system Additionally, the set includes a reverse osmosis water filter.

Sąlyga: naudotas, TECHNICAL DATA - Maximum workpiece dimensions: 650 x 420 [mm] - Maximum workpiece thickness: 160 [mm] Ndodpfouhcbcjx Adnsd - Maximum weight: 350 [kg] - Axis travel (X, Y, Z): 320 x 220 x 180 [mm] - Table feed rate: 900 [mm/min] - Wire feed speed: 0 - 10 [m/min] - Wire tension: 80 to 2500 [g] - Wire guide diameter: Ø 0.25 [mm] - Tank capacity: 260 [l] - Machine dimensions: 3,200 x 2,200 x 2,000 [mm] - Weight: 1,900 [kg] EQUIPMENT - CNC FANUC 16W control unit - Cooling unit - Lubrication tank with pump - Automatic wire threading

Gamybos metai: 2006, Sąlyga: naudotas, Ultrasonic and Electrolytic Cleaning, Wire Cleaning Line, Wire Cleaning System, Wire Treatment Plant Manufacturer: Sirio-Wire Model: M0209 Number of Wires/Strands: 12 (6+6) Wire Diameter: 1.0 – 5.5 mm; however, thicker wires have also been processed with this system and the achieved cleaning results were very satisfactory. Year of Manufacture: 2006 The system was only in operation for about three years, after which production was relocated to another site. Process: Ultrasonic and Electrolytic Cleaning in a Hot Bath A detailed process description can be found on the manufacturer's website siriowire under "Ultrasonic and Electrolytic Cleaning". The system is in good, operational condition and is complete except for the pumps. The operator catwalk and the drip tray on which the system is mounted are missing in the photos; these will be added soon. Njdpfx Aef Nku Rjdnjdd The last three photos show systems of this type in operation.

Sąlyga: naujas, Table height: 800 mm Dimensions (LxWxH): 2980 x 1480 x 800 Ndsdpfx Adefk Ailenod Table width: 1480 Table length: 2980 Approximate weight: 630 kg Special worktable systems of the SST, SFT, and SWT fixed series as 3D clamping workstations for efficient production of assembly, welding, and bonding constructions, e.g. fixtures, railings, frames, etc. With the help of the comprehensive range of clamping accessories (see catalog section welding table accessories), these table systems can also be used as flexibly configurable fixtures and thus allow for high-quality production of small and medium series. The special worktables are equipped with a 16 mm (dual standard) or 25 mm (triple 24+1) thick worktop, which features a Ø28 mm hole grid. Additionally, the tabletop offers a 100 x 100 mm grid marking for easy alignment of workpieces or fixtures. The table perforation allows the use of a wide variety of clamping elements and fastening aids. For special applications, the tabletop surface can also be supplied in stainless steel 1.4301, aluminum, plastic, or high-strength materials ST70, as an alternative to the standard. Thanks to the fully bolted construction of the clamping plate, the work surface can be replaced cost-effectively in case of later wear. This ensures the table system remains particularly sustainable for long-term use. Price must be reconfirmed with the manufacturer before ordering!

Gamybos metai: 1996, Sąlyga: naudotas, Schütte SF 26S DNT Year of manufacture: 1996 Control: Siemens 840C Number of spindles: 6 Maximum bar diameter [mm]: 26 Njdpfxei Hb Sze Adnodd Bar loading magazine: Cucchi BLT Multi-6 - (year 2015) Positions I + III + IV + VI: Longitudinal and cross slides Positions II + V: CNC slide Infeed position VI Pick-off unit at position VI Cutting oil system Ruez hinge belt conveyor in machine base Knoll hinge belt conveyor 280 S-1/40 ID 26565 (external) Electrostatic separator ISI RON/A 2500A, ID 26295