Mitutoyo QS250Z CNC matymo matavimo staklės – pagaminimo metai 2017 – įskaitant programinę įrangą ir

Mitutoyo QS250Z CNC Vision

Būklė: naudotas, TECHNICAL DATA - Max. bar diameter: 12.7 [mm] - Main spindle stroke (fixed/driven guide bush): 130/80 [mm] - Spindle power: 4 [kW] - Rotational speed: 12,000 [rpm] - Upper turret: 6 positions - Lower turret: 6 positions - Number of driven stations on turret: 6 - Max. diameter in sub spindle: 12.7 [mm] - Sub spindle rotational speed: 12,000 [rpm] - Dimensions: 2850 x 1100 x 1480 [mm] - Operating hours: 12,408 [h] - Main spindle hours: 9,400 [h] ACCESSORIES - CNC control TRAUB TX 8i - Bar feeder LNS Alpha ST 320 - C axis on main spindle and sub spindle - Brake for main spindle and sub spindle - Parts catcher with conveyor belt - Fire protection system - Coolant tank with pump and cooling unit Hnodpjuhav Defx Am Tsu - Chip conveyor - Various fixed and driven tool holders

Gamybos metai: 1988, būklė: geras (naudotas), Carlo Salvi 1-Matrize 2-Schlag Modell 780/SV Maximaler Abschneidedurchmesser (mm): 6,35 Maximale Abschneidelänge (mm): 97 Hnsdpfxshrdmxe Am Teu Maximale Ausstoßlänge (Stempelseite) (mm): 80 Maximale Geschwindigkeit (Stück/Minute): 360

Būklė: naudotas, Thread rolling machine, cold rolling machine, thread roll machine, profile rolling machine Manufacturer: PEE-WEE Model: UPW 24 Serial no.: P07 Year of manufacture: 2007 Max. rolling force: 24 tons Max. tool diameter: 270 mm Roll spindle diameter: 69.85 mm Hnedpfx Amsuz If Ns Tju Tool bore diameter: 70 mm (nominal diameter) Maximum tool mounting length/tool length: 180 mm Max. workpiece diameter: 50 mm Hydraulic motor output: 3 kW Roll drive motor output: approx. 5.5 kW Mains connection: 400 Volt, 50 Hz, 10 kW - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed in 4 steps via gear shifting - Hydraulic unit integrated in machine bed - Operating manual with electrical schematic diagram Required space (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge rolling: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length equals the width of the rolling tools. Through-feed rolling: Used when the thread length is greater than the width of the rolling tools. Through-feed tools have three sections – the lead-in, the calibration section, and the lead-out. Groove rolls have no pitch and are swiveled to match the lead angle of the profile to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and swivel angle results in the lead angle in the workpiece.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2025, veikimo valandos: 10 h, Funkcionalumas: visiškai funkcionalus, matavimo diapazonas X ašis: 200 mm, matavimo diapazonas Y ašis: 200 mm, matavimo diapazonas Z ašis: 200 mm, garantijos trukmė: 12 mėnesiai, X ašies eiga: 200 mm, Y ašies eiga: 200 mm, Z ašies eigos atstumas: 200 mm, įėjimo įtampa: 230 V, padavimo ilgis X ašis: 200 mm, padavimo eiga Y ašimi: 200 mm, padavimo ilgis Z ašis: 200 mm, Įranga: Tipinė plokštelė prieinama, apšvietimas, dokumentacija / vadovas, Completely Refurbished Multisensor Measuring Device Mahr MS 222 (Optical Measuring Instrument) LIKE NEW, including acceptance certificate prior to delivery and free nationwide delivery within Germany* Factory-refurbished premium multisensor measuring center with warranty and guarantee, rebuilt 2025. INCLUDES the latest software update, 18 months of free software update service, free lifetime software hotline, and user support. Delivery with factory service or by freight carrier, worldwide shipping available! Online and, optionally, on-site demonstrations with customer parts, application-specific consultation by accredited Profitech measurement laboratories during project planning. Comprehensive service available upon request: – Delivery, installation, commissioning, accuracy acceptance to standard, certification, and extensive acceptance documentation. Customized training programs also available as online courses. Rental, lease-purchase, or direct financing available through Profitech without a financial institution. Measuring device can be configured to individual customer requirements. Hnjdsglp Nqjpfx Am Tou Measuring range: 200 x 200 x 200 mm Load capacity (glass plate): 10 kg Scale resolution: 0.1 μm Max. traverse speed: 150 mm/s Dimensions: 900 x 750 x 950 mm Machine weight: 170 kg Control cabinet weight: 90 kg Length measurement uncertainty: According to VDI/VDE 2617-6 E2 (X, Y) = (3.2 + L/125) μm Optional extension: Renishaw probing system (TP20, TP200, SP25) upon request Retrofit 2025 Includes PC and software Maximum traverse speed: 150 mm/s Dimensions: 900 x 750 x 950 mm Weight: approx. 90 kg Sample image from manufacturer *Commissioning, on-site calibration, and training not included

Būklė: naudotas, Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 68910, ruošinio svoris (maks.): 5 100 kg, ratlankio plotis: 180 mm, šlifavimo disko skersmuo: 330 mm, sraigtinis kampas: 45 °, sukimosi greitis (min.): 1 100 aps./min, sukimosi greitis (maks.): 1 900 aps./min, įvesties srovės tipas: Oro kondicionierius, ratlankio skersmuo: 10 mm, krumpliaračio skersmuo: 330 mm, bendras svoris: 5 100 kg, bendras aukštis: 2 300 mm, bendras ilgis: 6 000 mm, bendras plotis: 4 500 mm, Ratų skersmuo - maks. 10 - 330 mm Ratų plotis 180 mm Modulis - maks. 7 Modulis - min. 0,5 Tvirtinimo ilgis 420 mm Dantų skaičius 10 - 600 Susukimo kampas - maks. +/- 45° Sukimosi greitis 1100 - 1900 aps./min Hnedeykrmcepfx Am Tou Šlifavimo disko skersmuo 280 - 350 mm Šlifavimo disko plotis 84 - 104 mm Staklių svoris apie 5,1 t Reikalingas plotas apie 4,5 x 6,0 x 2,3 m Šlifavimo alyvos valymas Reishauer AF

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, Werth Scope-Check 300x200x200 3D CNC Coordinate Measuring Machine TECHNICAL DATA Hnjdpfjvffcpjx Am Tsu Measuring capacity (X x Y x Z): 300 x 200 x 200 mm Worktable load capacity: 20 kg Magnification: X5 Resolution: 0.5 micron Weight: Approx. 300 kg No guarantee is given for the correctness, completeness, or up-to-dateness of the information provided.

Gamybos metai: 2005, būklė: paruoštas naudoti (naudotas), - USATO - TORNIO A TESTA MOBILE A 6 ASSI CON ALIMENTATORE DI BARRE LUNGHEZZA MAX DI TORNITURA: 320 mm DIAMETRO MAX DI TORNITURA: 32 mm MANDRINO: 200-8000 giri/min; 3,7 - 7,5 kW CONTROMANDRINO: 200-7000 giri/min; 1,5 - 2,7 kW CORSA ASSE X1: 108 mm CORSA ASSE X2: 228 mm CORSA ASSE Y1: 275 mm CORSA ASSE Z1: 325 mm CORSA ASSE Z2: 130 mm CORSA ASSE Z3: 410 mm AVANZAMENTI RAPIDI X-Y-Z: 20 m/min Hodpfevthv Iex Am Tenu TORRETTA MOTORIZZATA: 8 POSIZIONI; 200 - 5000 giri/min UNITÀ DI CONTROLLO: CINCOM SYSTEM M6D ALIMENTATORE DI BARRE: IEMCA Mod. BOSS 332 EVOLUTION PESO: 2850 Kg ACCESSORI: RACCOGLIPEZZI

Būklė: nepatikrintas (naudotas), Gamybos metai: 2008, Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: R14507, 2008 metų su Fanuc 18i-TB Su LNS Tryton 107 Gamybos šalis: JP Įtampa: 200V 3ph 50/60Hz Išmatavimai: 141x56x140 cm Grynas svoris: 950 kg TECHNINĖS CHARAKTERISTIKOS (standartinės) Ašių skaičius: 6 Velenų skaičius: 2 Pagrindinis velenas Maks. strypo skersmuo: Ø 7 mm Maks. apdirbimo ilgis: 40 mm Eiga: 40 mm Veleno greitis: 16000 min-1 Veleno galia: 1,1 kW C ašies indekso tikslumas: 0.0001° Priešinis velenas Maks. strypo skersmuo: 7 mm Veleno greitis: 10000 min-1 Galia: 0,5 kW C ašies indekso tikslumas: 1° 1-asis griebtuvas Pozicijų skaičius: 5 Varomų pozicijų skaičius: 2 Sukamųjų įrankių greitis: 8000 min-1 2-asis griebtuvas Pozicijų skaičius: 3 Hnodpsya Aq Refx Am Tju Galinio apdirbimo įrenginys Pozicijų skaičius: 3 Priešoperacija Pozicijų skaičius: 3 Kilpos klaidos ar praleidimai galimi, techninė informacija pateikiama be įsipareigojimų.

Būklė: naudotas, Gamybos metai: 1987, x-axis travel: 400 mm y-axis travel: 250 mm Workpiece height: 485 mm Control: ELESTA CNC 314 Total power requirement: 10 kW Machine weight approx.: 4,000 kg Space requirement approx.: [please specify dimensions] m H A U S E R (Switzerland) CNC controlled coordinate grinding machine Model: S 3 – CNC 314 Year of manufacture: 1987 / partially overhauled in 1998 # S 3 - 0463 _____ Table size approx.: 600 x 380 mm Table load capacity approx.: 300 kg Maximum longitudinal table travel (X): 400 mm Maximum cross table travel (Y): 250 mm Maximum vertical adjustment of grinding slide (W): 450 mm Maximum grinding spindle stroke (Z): 120 mm Grinding head stroke, hydraulic: 15 - 7,500 mm/min Installation height table/grinding spindle min./max.: -75 / +485 mm Grinding spindle overhang: 350 mm Maximum angular grinding: 16° Maximum bore grinding diameter approx.: 230 mm 18 spindle speeds, depending on spindle motor Continuously variable: 4,500–80,000 rpm Planetary rotation speed (C), continuously variable: 5–250 rpm U-axis, radial feed: 6 mm Total drive approx.: 10 kW - 380 V – 50 Hz Machine weight approx.: 4,000 kg Accessories / Special Features: • CNC path control type CNC 314 (ELESTA – POSELESTA II) with monitor for 4 axes (=XYC+U-axis), interpolation in 2.5 dimensions (XYC). The U-axis is a feed axis and is not interpolatable. Teach-in programming directly on the machine, with various subprograms, as well as manual movement of the axes at the control panel or with electronic hand unit. Separate digital readout for Z-axis • U-axis as manual and controlled radial feed axis at the grinding head, with digital readout of feed size • 2 grinding motors #5674 and 3980 up to a spindle speed of 80,000 rpm • Built-in acoustic grinding contact monitoring device KSV 5 Hedpst Hw Txefx Am Tsnu • HI-Cut device (oil cooling) and automatic fire protection system • Free-standing coolant system with belt filter, separate hydraulic unit and control cabinet, central lubrication, various collets, operating tools, etc. Unfortunately, no further accessories currently available. Condition: good to very good / shortly ready for demonstration under power Delivery: ex stock, as inspected Payment: strictly net - upon receipt of invoice

Būklė: naudotas, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 [mm] - Max. machining length: 170 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 20 [mm] - Spindle speed: 10,000 [rpm] Hodpfxjwizt De Am Tenu - Spindle drive power: 2.2 [kW] - Minimum C-axis resolution: 1 [degree] - Number of tool holders: 1 TOOL HOLDER 1 - Number of positions: 8 - Number of driven positions: 3 - Driven tool speed: 5,000 [rpm] FRONT TOOLING - Number of positions: 4 BACK WORK - Number of positions: 7 ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total power consumption: 11 [kW] WEIGHT AND DIMENSIONS - Footprint: 1640 x 1200 [mm] - Machine height: 1725 [mm] - Machine weight: 1950 [kg] - Operating hours: 11,500 [hrs.] EQUIPMENT - Control: Fanuc Oi TD - Powered guide bush - Parts catcher - Parts conveyor - Parts ejector - Chip conveyor - Coolant tank - Bar feeder: Tornos SBF 320 - Electrical transformer