Panelinis furgonas

MERCEDES-BENZ SPRINTER 319 CDI STANDARD, IEBETüR

Sąlyga: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: A2536805, Pressure: 40 t Stroke: 250 mm Rsdpfefxyhfox Agijp Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. forward speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table opening: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom built for you. Production time is approximately 5 months from receipt of payment. Forward stroke: The press moves to the zero position at up to 90 mm/sec. Positioning accuracy is 0.5 mm or better. Return stroke: The press returns to the end position at up to 90 mm/sec. Accuracy is also 0.5 mm or better. Holding time can be set from 0 to 10 seconds (in 0.1 second increments). Pressing force is adjustable from 10 to 40 tons in bar. Additional control details: The control unit can be locked via a key switch. The key switch provides the following functions: Manual operation with two-hand control at 9.5 mm/sec in setup mode. (Stop in any desired position by releasing the switches.) Manual operation for bending tasks at up to 9.5 mm/sec using two-hand operation and automatic return to the top dead center when the two-hand buttons are released. Automatic operation with safe tools at up to 200 mm/sec. This function is equipped with a warning label on the control panel. In automatic mode, the machine is strictly suitable for the use of fully enclosed, safe tools only. This information is prominently displayed on the front of the machine. In manual setup mode, the machine can also be operated with two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A rotary key switch enables switching between automatic and manual mode. Position adjustment for top dead center (OT) and bottom dead center (UT) and the switching position for speed reduction are performed via sensors adjustable along a chrome-plated rod. The sensor can be finely adjusted via a clamping thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and can bend sheet metal via two-hand operation, but it can also punch, notch, and bend in automatic mode with appropriate safety tooling.

Sąlyga: geras (naudotas), Gamybos metai: 2007, 1 naudota CNC įrankių šlifavimo staklė Gamintojas: Schneeberger Modelis: Corvus GDS 650 Pagaminimo metai: 2007 CNC valdymas: FANUC 160i Programinė įranga: Quinto 4.3 Aktyvintos programinės įrangos parinktys nr.: 1, 2, 19, 21, 22, 30, 31, 32, 35 -Įrengtas Fanuc pakrovimo robotas -Aušinimo skysčio sistema Darbinės eigos: X ašis: 650 mm Y ašis: 300 mm Z ašis: 300 mm C ašies pasukimo kampas: +150°/-60° C’ ašies pasukimo kampas: +/- 180° Šlifavimo velenas: Disko skersmuo iki 250 mm Apsisukimų dažnis: 0–10'000 aps./min. Maks. veleno galia: 26 kW Tvirtinimas HSK 80 Maks. diskų skaičius: 6 Ruoninys velenas: Maks. kampinis greitis: 180°/s Variklio galia: 1,6 kW Tvirtinimas: ISO 50 Tikslumas (rezoliucija): Linijinių ašių žingsnis: 0,001 mm C ašies žingsnis: 0,001° Matmenys: Rjdpfx Agju A Dn Neisp Ilgis: 3100 mm Plotis: 1915 mm Aukštis: 2190 mm Svoris: 8500 kg U ašis su įmontuotu lunetu, fiksuojamu cilindru ir atatampiu 6 padėklų įkroviklis (skersmuo 3–32 mm) 64 plastikiniai įvorės Techniniai duomenys gali būti netikslūs

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, X ašies eiga: 2 050 mm, Y ašies eiga: 850 mm, Z ašies eigos atstumas: 750 mm, įrankių magazino lizdų skaičius: 36, stalo ilgis: 2 200 mm, stalo plotis: 850 mm, valdiklio modelis: OKUMA-OSP-HMI, aušinimo skysčio tiekimas: 15 juosta, atstumas nuo stalo centro iki veleno galo: 950 mm, ašies variklio galia: 22 W, ašies skaičius: 36, greitasis eiga Z ašyje: 16 m/min, greitas poslinkis X ašimi: 16 m/min, greitas poslinkis Y ašis: 16 m/min, veleno nosis: BT 50, veleno greitis (maks.): 10 000 aps./min, veleno greitis (min.): 50 aps./min, stalo apkrova: 2 500 kg, įrankio skersmuo: 120 mm, įrankio ilgis: 400 mm, įrankio svoris: 20 g, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, 3-axis vertical machining center with OKUMA-OSP-HMI CNC Redpou Dinkofx Agisp

Gamybos metai: 2007, Sąlyga: visiškai atnaujintas (naudotas), GF AgieCharmilles Progress V3 Year of manufacture: 2007 Travel paths: X = 500 mm, Y = 350 mm, Z = 426 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (submerged) / 800 kg (dry) Achievable surface finish: Ra 0.20 µm Rodpfxjmmfwus Agiop Maximum cutting speed: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged wire EDM machine with automatic wire threading and re-threading in case of wire breakage Manual front door (accessible from one side) Including AGIEJOGGER handheld control for convenient setup AGIE IPG-V generator AGIEVISION 5 control system Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3,460 kg The machine will be cleaned and completely overhauled after receiving your order. You will receive a 6-month warranty on all machine parts. Commissioning and training are also available upon request.

Sąlyga: naudotas, rida: 143 755 km, galia: 105 kW (142,76 AG), pirmoji registracija: 10/2021, kuro tipas: dyzelinas, bendras svoris: 3 500 kg, spalva: pilkas, emisijos klasė: Euro 6, krovimo vietos ilgis: 3 300 mm, krovinių skyriaus plotis: 1 800 mm, krovos erdvės aukštis: 1 900 mm, Įranga: ABS, oro kondicionavimas, suodžių filtras,

Sąlyga: geras (naudotas), Gamybos metai: 2002, Cutting diameter: 320 mm Saw band length: 4160 mm Cutting width: 610 mm Maximum cutting length: 500 mm Vise opening: max. 620 mm Infinitely variable saw blade speed: 15–120 m/min Working height: 760 mm Saw blade dimensions: 4160 x 34 x 1.1 mm Control: Siemens Siematic OP3 Total power requirement: 2.6 kW Machine weight: approx. 1.96 t Space requirements: approx. 2.55 x 2.45 x 1.5 m Well-maintained automatic mitre band saw with Siemens Siematic OP3 control for quantity and cut length, hydraulic frame vice, and stepless saw blade speed adjustment. The machine can be used in both automatic cycle and simple manual single-cut mode. It was previously operated in single-piece production for narrow parts, ONLY approx. 3 hours per week! Estimated operating hours = 3400. WIDE cutting capacity at 90° flat up to 610 mm! Easy miter adjustment. Rjdpfjv Htimox Agiop Cutting range at 0° / 90°: - Round: 320 mm - Flat: 610 x 320 mm Cutting range at 75°: - Round: 320 mm - Flat: 350 x 200 mm Cutting range at 60°: - Round: 300 mm - Flat: 300 x 200 mm Cutting range at 45°: - Round: 260 mm - Flat: 250 x 180 mm Cutting range at 30°: - Round: 160 mm - Flat: 150 x 150 mm Please note: New price approx. €28,000; comparable German machines significantly more! This is a used machine, therefore we sell under exclusion of any warranty. STOCK-HOLDING DEALER WITH OWN 1600 m² WAREHOUSE.

Sąlyga: naudotas, Grinding diameter 350 mm Grinding length 600 mm Centre height 175 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore diameter 127 mm Workpiece spindle taper MK5 Workpiece spindle speed 20–400 rpm Workpiece headstock swivels 360° Grinding spindle head swivels 180° ± Rjdeuxft Ejpfx Agiep Grinding spindle speed 1500, 1700, 2200 rpm Stepwise infeed 0–9.99 mm/ø Continuous infeed 0–9.99 mm/ø Table swivel ±10° Longitudinal table travel 1100 mm Table feed rate 0.02–6 m/min Workpiece weight between centres 130 kg Max. workpiece weight (supported) 130 kg including setup Max. cross travel 270 mm Internal spindle holder 80 mm Tailstock quill mount MK 3 Quill stroke 30 mm Total power requirement 6.5 kW Machine weight approx. 3.05 t Space requirement approx. 4 x 2 m Reconditioned according to Kellenberger guidelines including new, modern, and future-proof control system. Photo shows a machine previously supplied with 1000 mm centres. -The operation via touch panel is extremely simple. -The symbols on the control panel are nearly identical to the original controls, so no retraining is required. -Diagnostic function with PLC fault display and digital I/O indication. -Dressing function can be extended or modified as per customer request. -Oriented spindle stop of the workpiece spindle available on request. -New maximum infeed amount 40 mm, can be further increased on request. -Digital display in 2 axes. X-axis resolution 0.5 µm Options: -Encoder with digital display in the workpiece headstock -Encoder with digital display in the grinding spindle headstock (height adjustment not possible with spindle) -New rigid internal grinding attachment, diameter 80 mm or 100 mm -Increase of centre height up to max. 225 mm -Speed control for the grinding spindle Included: -Operating tools -Clamping sleeve for chuck Additional accessories available on request. The machine features an electronically controlled infeed system on the X-axis with stepper motor drive. Hydraulic longitudinal and rapid table traverse. Versatile use in production for external cylindrical and internal grinding, or for external, face, and internal grinding in one single setup of workpieces. Possible options: -Semi-automatic dressing cycles for external and internal grinding -Automatic dressing compensation -Measurement control Currently, the machine does not comply with the basic safety and protection requirements as specified in BetrSichV 2015. The necessary minimum protection targets must be determined by means of a risk assessment in accordance with BetrSichV.

Gamybos metai: 2000, Sąlyga: paruoštas naudoti (naudotas), Travel range X/Y/Z: 600mm/410mm/520mm, table dimensions X/Y: 840mm/420mm, spindle speed: 6000rpm, spindle power: 8.5kW, tool holder: SK40, tool positions: 22, rapid traverse X/Y/Z: 36m/36m/20m/min. Machine dimensions X/Y/Z: approx. 2200mm/2300mm/2300mm, weight: approx. 2500kg, control: Heidenhain TNC 426. An on-site inspection is possible. Rjdpfsv Uqb Njx Agijp

Sąlyga: naudotas, Gamybos metai: 2017, Technical details: Grinding diameter: 280/320 mm Grinding length: 750 mm Centre height: 170 mm Machine weight approx.: 22.5 t Redpfx Agettxg Seiep Space requirements approx.: 4.7 x 3.65 x 3.0 m

Sąlyga: geras (naudotas), cilindrinės šlifavimo staklės Redpetrgndofx Agiep