Šaldytuvo kėbulo furgonas

MERCEDES-BENZ Sprinter 313 CDI Frischdienst/Carrier /AC/Autom.

Būklė: geras (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, vis dar gerai išsilaikiusi skiedrų katilinė 60 kW šildymo galia Dcedew Rpdrspfx An Heh gamybos metai 2014 be ištraukimo sistemos (bet galima pasirūpinti)

Būklė: geras (naudotas), Gamybos metai: 2010, Poliedra is a dryer designed for curing UV coatings on three-dimensional surfaces. In spray applications, the UV dryer must also cure the product on the vertical edges of the panel. Superfici developed UV modules with special reflectors. The unique geometry of the “Poliedra” UV reflector ensures consistent UV radiation distribution across both the surface and the edges. This makes it possible, using a single lamp tilted in relation to the feed direction, to irradiate the surface, all panel edges, and all collectors on the board. Dcodommbvtepfx An Hsh Working width: 1300 mm Emitters: 1 x Ga and 1 x Hg (new emitters) / 1700 mm – 120 W/cm Power: 40 to 120 W/cm

Būklė: naudotas, Gamybos metai: 2012, galia: 110 kW (149,56 AG), Hargassner 110 kW – Biomass Boiler (Pellet / Wood Chip) – 2 units available, cascade operation possible For sale is a modern Hargassner 110 kW fully automatic biomass boiler (year of manufacture: 2012). ⚠️ 2 identical boilers available! ➡️ Ideal for cascade operation up to approx. 220 kW ➡️ High operational reliability and optimal output modulation ⸻ Technical Data: • Year of manufacture: 2012 • Output: 102–109 kW • Rated thermal output: up to 116.5 kW • Max. temperature: 95 °C • Max. pressure: 3 bar • Water content: 190 litres • Weight: approx. 1,010 kg ⸻ Key Features: • Fully automatic operation • Lambda sensor → automatic combustion control • Modulating output (demand-driven adjustment) • Automatic cleaning and de-ashing • 3-pass boiler → high efficiency • Fireclay-lined combustion chamber → clean combustion • Automatic (self-cleaning) grate • Very low power consumption (~0.18 kW) • Modern, energy-efficient system ⸻ Feed Technology / Equipment: • Incl. feed auger (standard equipment) • Currently equipped with automatic pellet suction system (vacuum conveyance / suction feed) ➡️ Pellet operation made easy: • Connection to pellet storage via flexible hose • System automatically conveys pellets into the boiler • Fully automatic operation without manual feeding ➡️ The boiler can also be used for wood chip operation (optional) via installation of a discharge system ⸻ Condition: Dcodpfxsy A Ei Ne An Hsh • Recently dismantled • Fully functional up to the point of removal ⸻ Inspection: Viewing by appointment at our 1,500 m² warehouse in Mosonmagyaróvár, Hungary TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family business with around 20 years of experience in heating technology, operating a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, maintaining a permanent inventory of approx. 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – about 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major city on the Hungarian side after crossing the Austrian border. 🔥 Our product range includes: • Wood chip boilers • Pellet boilers • Log gasification boilers • Log boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Air heaters • Hot air blowers • Warm air heating systems • Industrial heating systems • Buffer tanks • Heat exchangers • Feed augers • Discharge systems • Burners • Pumps • Extensive heating accessories ⚙️ Accessories and Components: We also offer a large selection of accessories, such as circulator pumps, plate heat exchangers and many other components – suitable for everything from private installations to industrial applications. 🏭 Brands in our portfolio: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Current Offers: Much of our current range can be found on our website: topheatingsystems.com Additional units are available that are not yet listed online. 📅 Inspections: On-site viewing at our warehouse available by prior arrangement. If you are interested, please contact us – we will be happy to help you find the right solution.

Gamybos metai: 2006, būklė: paruoštas naudoti (naudotas), I am selling an edge spraying machine with sanding heads, MAKOR GEMINI 56, year of manufacture 2006. - 2-zone vacuum coating with self-contained pump system, NO overspray and no paint damage - 2-zone UV drying - 2 swiveling corner sanding units Dsdpfx Asim Eyxjn Hjch Material is immediately dry and ready for use! Very good condition. Available immediately. Inspection possible.

Gamybos metai: 2026, būklė: naujas, The compressed air refrigeration dryer is designed to lower the temperature of compressed air and remove water and oil particles contained in the flowing air. Refrigeration air dryers are essential in applications where moist air could cause corrosion, contamination, or damage to tools, machines, or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigeration dryer has been engineered for maximum efficiency and durability. The main construction elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. The use of a counterflow system recovers heat, enhancing the overall energy efficiency of the system. 2. Refrigeration circuit evaporator In the second stage, compressed air enters the evaporator, where it is further cooled down to a 3°C dew point. This results in the condensation of the contained water vapour and oil particles. 3. Condensate separator After cooling, the gas and condensate mixture flows into an efficient separator, where the condensate is separated and automatically discharged outside the unit. 4. Fan speed control system Dcodpfomt Dbhjx An Hoh The variable-speed fan technology enables intelligent adjustment of cooling intensity to actual demand, which reduces energy consumption and increases component lifespan. Technical specifications Inlet/outlet pipe diameter (BSP): 1" Maximum operating pressure: 10 bar Maximum inlet air temperature: ≤ 38°C Dew point temperature: 3°C Capacity: 1500 l/min Power: 0.58 kW Supply voltage: 230 V Dimensions (L x W x H): 380 x 600 x 625 mm Weight: 31 kg Type and amount of refrigerant: R134a, 400 g The listed price is NET. The price does not include transport costs. For more information, please contact us by phone or email. We invite you to visit our website for the full list of offers.

Būklė: naujas, Gamybos metai: 2024, mašinos/transporto priemonės numeris: 6913390001, hoku 113-90 – Solid Craftsman Compressors with V-belt Drive and 2-Cylinder High-Performance Cast Iron Unit The universal compressor with robust V-belt drive and high-quality components, specially designed for tradespeople. Suitable for applications where compressed air quality, durability, and efficiency are essential. Features extended service life thanks to high-performance aggregates operating at low RPM. Safe transport and stable positioning ensured by large wheels with parking brake. Optimal cooling provided by a large fan wheel; aftercooler with cooling fins ensures a low entry temperature to the tank, resulting in reduced moisture in the compressed air. Improved efficiency through optimized compressor units. Standard equipment includes Condor pressure switch, pressure gauge, pressure regulator with water separator, and quick coupling. Motor equipped with overload protection. Dcedpjvl Euxofx An Hoh Technical Specifications: Intake capacity: 500 l/min, Effective output: 375 l/min, Max. pressure: 10 bar, Tank capacity: 90 l, Cylinders/stages: 2/1, Speed: 1,300 rpm, Motor power: 3 kW / 400 V Available from location Seevetal, without shipping, as inspected, subject to prior sale.

Būklė: naujas, mašinos/transporto priemonės numeris: 691340002, hoku 119-90 – 2-stage mobile piston compressor The all-rounder with belt drive and high-quality features, especially suitable for tradespeople who require compressed air quality, durability, and efficiency. Features a long service life thanks to high-performance units with low-speed operation, safe transport and outstanding stability due to large wheels with parking brake, optimal cooling by means of a large fan wheel, aftercooler with cooling fins ensures low air receiver inlet temperature, resulting in reduced moisture in the compressed air, improved efficiency thanks to optimized units. Standard equipment includes Condor pressure switch, pressure gauge, pressure regulator with water separator, and quick coupling; motor with overload protection. Technical data: - Suction capacity: 674 l/min - Effective delivery rate: 505 l/min - Max. pressure: 10 bar - Tank capacity: 90 l Dcodpfjvl Ev Ajx An Hsh - Cylinders/stages: 2/2 - Speed: 920 min⁻¹ - Motor power: 4 kW / 400 V Available ex location Seevetal, without transport, as inspected, subject to prior sale.