Juostinis pjūklas

MEP SHARK 332-1 NC 5.0

Saw blade dimensions: 3650 x 27 x 0.9 mm
Cutting speed: 15 – 100 m/min
Vice opening: 335 mm
Cutting capacity at 90°: round 300 mm
Cutting capacity at 90°: square 260 mm
Cutting capacity at 90°: flat 330 x 260 mm
Cutting capacity at 45°: round 260 / 200 mm
Cutting capacity at 45°: square 250 / 180 mm
Cutting capacity at 45°: flat 270 x 200 / 200 x 160 mm
Cutting capacity at 60°: round 180 mm
Cutting capacity at 60°: square 170 mm
Cutting capacity at 60°: flat 170 x 170 mm
Total connected load: 2.2 kW
Weight: 1,105 kg
Dimensions: 2700 x 2300 x 1800 mm

Electrohydraulic fully automatic band saw with multi-microprocessor control and additional semi-automatic, semi-automatic dynamic, and manual operation modes.
Kdedpfxsyv Nylo Agfji

- Automatic cycle (cuts from 0° to 60° left). CNC automatic operation with two controlled axes, allowing the programming of up to 1000 different cutting programs for materials of identical thickness, each with separate cutting lengths and quantities.
- Semi-automatic, semi-automatic dynamic, and manual cycles (cuts from 45° right to 60° left)
- Semi-automatic dynamic system (manual lowering of the saw bow to the desired position and cycle start via hand control button)
- Manual or semi-automatic dynamic cycle for direct cutting operations without programming.

Selected features:

- New fieldbus communication system (Modbus protocol)
- Display with 20 characters x 4 lines for showing technical parameters such as: blade speed, programmed and completed cut quantities, blade thickness, feed length, cutting time, ammeter, blade tension, and display of approximately 100 diagnostic messages and warnings — available in the user’s selected language.
- Logging and display of alarm and error messages, with the possibility to review past incidents.
- Automatic parameter setting via control system when a new drive or inverter is installed.
- Electronic inverter for infinitely variable blade speed adjustment from 15 to 100 m/min.
- Latest generation hydraulic control unit, offering high performance and low energy consumption.
- New 600 mm material feed with stepper motor and ball screw mounted on opposing ball bearings.
- Saw bow stroke programmable directly from the control panel for adaptation to the workpiece.
- Electronic blade tension monitoring.
- Automatic cutting force monitoring via a servo valve mounted directly on the cylinder.
- Coolant tank (equipped with 2 electric pumps for band lubrication and cooling) built into the machine base.
- Chip drawer (can be replaced by a chip conveyor — see special accessories)
- Prepared for installation of a minimum quantity lubrication system for the blade (optional), alongside the standard emulsion oil lubrication.
- Chip removal brush.
- Machine is configured for pallet truck transport.
- Bi-metal band saw blade suitable for solid and profile material.

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.