Juostiniai pjūklai

Mega BS-400

Sąlyga: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Ffodpsfxyhfefx Ab Sot Motor: 5.5 kW Max. working height: 450 mm Max. forward speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table opening: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom built for you. Production time is approximately 5 months from receipt of payment. Forward stroke: The press moves to the zero position at up to 90 mm/sec. Positioning accuracy is 0.5 mm or better. Return stroke: The press returns to the end position at up to 90 mm/sec. Accuracy is also 0.5 mm or better. Holding time can be set from 0 to 10 seconds (in 0.1 second increments). Pressing force is adjustable from 10 to 40 tons in bar. Additional control details: The control unit can be locked via a key switch. The key switch provides the following functions: Manual operation with two-hand control at 9.5 mm/sec in setup mode. (Stop in any desired position by releasing the switches.) Manual operation for bending tasks at up to 9.5 mm/sec using two-hand operation and automatic return to the top dead center when the two-hand buttons are released. Automatic operation with safe tools at up to 200 mm/sec. This function is equipped with a warning label on the control panel. In automatic mode, the machine is strictly suitable for the use of fully enclosed, safe tools only. This information is prominently displayed on the front of the machine. In manual setup mode, the machine can also be operated with two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A rotary key switch enables switching between automatic and manual mode. Position adjustment for top dead center (OT) and bottom dead center (UT) and the switching position for speed reduction are performed via sensors adjustable along a chrome-plated rod. The sensor can be finely adjusted via a clamping thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and can bend sheet metal via two-hand operation, but it can also punch, notch, and bend in automatic mode with appropriate safety tooling.

Sąlyga: naudotas, Single-column hydraulic press, straightening press, C-frame press ECKOLD Press frame with hydraulic cylinder, mobile press, punching unit Model RSD 1500 - 125 Machine No. 317 / 690, year of manufacture approx. 1986 Pressing force: 150 tons Throat depth: 125 mm Ram stroke: 35 mm Table size: 280 x 210 mm Ram surface: Ø 125 mm Installation height (ram to table): max. 265 mm Ffsdpfed Swtaex Ab Sst Table height above floor: 403 mm Hydraulic operating pressure: max. 500 bar - Without hydraulic power pack - Ram surface with 4 threads M16 and 20 mm guide groove, center locating hole Ø 15 mm - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Required space L x W x H: 700 x 300 x 1450 mm Weight: 1250 kg Good condition

Sąlyga: naudotas, Gesamtanschlusswert: 12 kW Maschinengewicht ca.: 4,1 t Maschinenabmessungen ca.: 3,1 x 5,9 m Sägebandlänge: 6300 mm Kapazität bei 90° (rund): 410 mm Kapazität bei 90° (flach): 620 x 400 mm Kapazität bei 45° (flach): 450 x 400 mm Schnittbereich bei 30° (flach): 300 x 300 mm Schnittgeschwindigkeit: 20 - 140 m/min Vorschublänge: 3000 mm Fodpfx Aov Aya Rsb Sjft Steuerung: NC Kühlmittel: Ölnebel, kein Weißwasser

Sąlyga: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, Baty SM350 Profile Projector – High-Performance Inspection for Demanding Applications Ffodpfx Abeuyh Rpe Sst The Baty SM350 is an advanced profile projector featuring a 350 mm screen and a robust, precision workstage with a measurement range of 250 mm x 125 mm. It is ideal for precise optical inspections in environments where reliability and accuracy are top priorities. XLS: A simple 2-axis digital readout for X and Y measurements, ideal for basic applications. MX200: This model expands functionality by enabling geometric measurements, including the calculation of angles, radii, and distances. It also allows for the creation of tolerance reports. FT2: The most advanced version offers a touchscreen interface with Fusion 2D software. This variant includes optical edge detection and comprehensive report generation, including SPC charts and DXF overlays. The device is equipped with a 3-position lens turret, allowing for quick and easy switching between different magnification lenses without the need for recalibration. With the FT2-E display option, the SM350 also provides advanced measurement features such as edge detection and DXF overlays. These capabilities make it the ideal solution for detailed inspections and demanding measurement tasks in manufacturing environments.

Sąlyga: naudotas, Gamybos metai: 2000, Pjovimo skersmuo 280 mm Pjūklalapio ilgis 4930 mm Pjovimo sritis ties 90 laipsnių: kvadratinė 280 x 280 mm Pjovimo sritis ties 45 laipsnių: apvali 280 mm Pjovimo sritis ties 45 laipsnių: kvadratinė 280 x 280 mm Pjovimo sritis ties 60 laipsnių: apvali 220 mm Pjovimo sritis ties 60 laipsnių: kvadratinė 200 x 200 mm Padavimo ilgis 600 mm Padavimo ilgis daugkartinis 5400 mm Ffjdpjw En Efjfx Ab Sot Pjovimo greitis 17 - 90 m/min Likutinio ruošinio ilgis min./maks. min. 30 mm Pjovimo skersmuo min. 10 mm Valdymas KASTO, Compact Control Bendra galia 5 kW Staklių svoris apie 1,75 t Staklių matmenys I x P x A 2,68 x 2,54 x 1,59 m Priedai: aušinimo skysčio sistema, ritinėlių transporteris 3300 mm ilgio, 300 mm pločio; ritinėlių transporteris 1350 mm ilgio, 300 mm pločio

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, Reference: LT-2501 Manufacturer: Okuma Model: LB4000EX-MC x 750 Control: Okuma OSP-P200L Year of manufacture: 2007 Keyboard / Software Language: International / Spanish Country of origin: Japan Technical Specifications: Capacity: Swing over bed: Ø 670 mm Swing over carriage: Ø 480 mm Distance between centers: 770 mm Maximum turning diameter: Ø 430 mm Maximum turning length: 750 mm Maximum bar capacity: 90 mm (Modification required) Main Spindle: Spindle diameter: Ø 160 mm Spindle nose (type): JIS A2-11 Spindle bore diameter: Ø 112 mm Speed ranges: 2 ranges, infinitely variable Spindle speed: 30 – 3,000 rpm Motor: 37 / 30 kW (30 min / continuous) Motor type: PREX Motor Tailstock: Rotating center: MT 5 Stroke (W-axis): 780 mm Rapid traverse: 12,000 mm/min Maximum thrust: 7,500 N Z Axis: Travel: 840 mm Cutting feed: 0.001 – 1,000.00 mm/rev Rapid traverse: 30,000 mm/min X Axis: Travel: 300 mm Cutting feed: 0.001 – 1,000.00 mm/rev Rapid traverse: 25,000 mm/min C Axis: Controlled angle: 360° (0.001° increment) Ffodpow Dvb Sofx Ab Sjt Turret: Type: M-V12 NC Number of tool stations: 12 x BMT40 (L or M) Indexing time: 0.2 sec/position Tool dimensions: External turning: 25 x 25 mm Internal turning: Ø 40 mm Driven tool: Rotational speed: 45 – 6,000 rpm Speed ranges: 1 range, infinitely variable Motor: 7.5 / 4.3 kW (25 min / continuous) Motor type: PREX Motor Dimensions and weights: Machine height: 1,955 mm Floor space required: 3,050 x 1,900 mm Machine weight: 6,300 kg Included options: Quick-change chuck (3 jaws, Ø 315 mm) SCHUNK ROTA THW plus 315-104 CROMAR chip conveyor Assisted programming (ONE Touch IGF Advanced) Rigid tapping DNC-T1

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, Okuma MB-46VAE apdirbimo centras Metai: 2007 Valdymas: OKUMA OSP P200-M Stalo matmenys: 1000 x 460 mm X eiga: 762 mm Y eiga: 460 mm Fsdpfx Absxwtp Dj Ssft Z eiga: 460 mm Stalo apkrova: 700 kg Veleno aušintuvas Tvirtinimas: MAS BT40 Įrankių magazinas: 42 vietų Svoris: 6500 kg Matmenys (I x P x A): 2750 x 2160 x 2715 mm

Sąlyga: geras (naudotas), Gamybos metai: 2013, veikimo valandos: 2 300 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 630124, DEBURRING MACHINE MANUFACTURER: ERNST / Sematec MODEL: ATLAS EBR YEAR OF MANUFACTURE: 2013 Condition: Used Operating hours: 2,300 hours Working width: 1,500 mm Maximum pass-through width: 1,520 mm Workpiece thickness: 1–100 mm Feed rate: 0.5–4.0 m/min, infinitely variable Transport belt: rubber Working height: 1,000 mm Maximum part weight: 160 kg/m² Deburring drum: 420 mm diameter 50 oscillating strokes per minute Drive motor: 15 kW Abrasive size: 1,540 mm x 1,540 mm ATLAS Brush Module – SPIN 2 rotating brush units: 300 mm x 260 mm Vacuum unit for small parts: 200 mm wide, 80 x 80 mm Infeed section (LxWxHx sheet width x sheet thickness): 2,704 x 385 x 1,650 x 0.8–100 mm Deburring module: 2,704 x 580 x 1,650 x 1,500 x 0.8–100 mm Brushing module: 2,704 x 870 x 1,650 x 1,500 x 0.8–100 mm Discharge belt cleaning: 2,704 x 290 x 1,650 x 1,500 x 0.8–100 mm Module specifications (Deburring / Brushing / Rotor / Discharge): Power: 16 / 12 / 20 / 1 Current: 32 / 24 / 40 / 2 Compressed air: 6/80 bar (all modules) Extraction (m³/h): 2,500/25 / 2,500/725 / 4,500/25 / - Fjdpfxsxuu Dke Ab Soft Weight: 400 kg / 1,600 kg / 1,800 kg / 400 kg Operating voltage: 400 V / 50 Hz Special voltage: 480 V / 60 Hz Control voltage: 24 V Compressed air: 6 bar, dry and oil-free Feed rate: 0.5–4 m/min, steplessly adjustable (standard) 1.0–8 m/min, steplessly adjustable (optional) Working height: 1,000 mm The external filter is not included in the sale. Processing width 1,500 mm, thickness up to 100 mm. The vacuum conveyor covers the entire width of the machine. The first unit is a grinding drum (foam rubber drum with abrasive paper, pneumatically tensioned) that can also oscillate as required and levels the burr. The second module consists of two steel wire brushing drums that round/deburr the edges. This is followed by a rotor module (rotating multi-brush head) for fine edge rounding. EC Declaration of Conformity The dry dust collector is not included in the sale, but we can offer a suitable system if required (OPTIONAL). Operating manual included. The machine is sold without an infeed roller conveyor!

Sąlyga: naujas, Gamybos metai: 2025, New machine Year of manufacture: 2025 TECHNICAL DATA Wheel diameter: 500 mm Belt speed: 1300 m/min Cutting height: 330 mm Cutting width: 480 mm Maximum blade length: 4140 mm Saw blade width min./max.: 15 mm / 25 mm Optional with special coating Saw blade width min./max.: 6 mm / 20 mm Table size: 670 x 495 mm Table height: 900 mm Extraction port: 2 x Ø 100 mm Motor power: 1.5 kW / 2 HP Special voltage: 400 V / 50 Hz Colour: RAL 7035 Light grey and RAL 5000 Violet blue Net weight: approx. 210 kg Ffedov Huggopfx Ab Set TECHNICAL DESCRIPTION Robust German machine design Machine stand in an attractive, modern, torsion-resistant double-chamber welded steel construction Upper and lower doors secured with limit switches Upper and lower precision bandsaw blade guides APA 2, size 1 Finely planed cast iron table Tilting table up to 45° Dynamically balanced bandsaw wheels with vulcanized rubber tires Fence usable to the left of the saw blade, fence profile can be folded down Blade tension indicator 1 saw blade 4140 x 20 x 0.45 mm, tooth pitch 6 mm, item no. 3783.20K Mechanical height adjustment of the blade guard via handwheel with locking ratchet Pushbutton switch for start/stop with emergency stop and motor protection relay Wear-free electric motor brake CE compliant GS tested Machine stand left-hand design Drive motor 1.5 kW / 2.0 HP Availability: short-term Location: Flörsheim

Sąlyga: geras (naudotas), Various Deckel FP3 milling machines are available for sale, all of which are in good condition. A notable feature of this machine is the mounted table, which can be tilted, rotated, or shifted. Purchasing the machine with a "standard" milling table is also possible. The machine has been cleaned and inspected by us. On request, safety devices can be installed for an additional charge. Dimensions (L x W x H): approx. 2000 x 1600 x 1900 mm Weight: approx. 1500 kg TECHNICAL DATA Digital readout: 3-axis digital display Travel distances: X-axis: approx. 500 mm Y-axis: approx. 300 mm Z-axis: approx. 380 mm Spindle: Speed range: approx. 40 - 2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8 kW Tool clamping: manual Feed rates & rapid traverse: on all 3 axes Feed range: approx. 10 - 500 mm/min Rapid traverse: approx. 1.5 m/min Prices subject to VAT Viewings possible by appointment. Contact us, our team looks forward to assisting you. Ffjdpfjiz T Exjx Ab Set Trade-ins or exchanges possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or contact options, please visit our website.