Padavėjas pirkti naudotą (1)

Sąlyga: naujas, Unladen weight: 16,000 kg Fully automatic bitumen emulsion system 1. COLLOID MILL (10 m³/h) – 1 unit 2. FOAM TANK (5 m³) – 1 unit 3. BITUMEN FEED PUMP – 1 unit 4. FOAMING SYSTEM – 1 unit 5. PIPE NETWORK AND FITTINGS – 1 set 6. CONTROL PANEL – 1 unit 7. CHASSIS – 1 unit FOAM TANK (1 unit) A frame: - Box profile - Capacity: 5 m³ - Tank body is manufactured from 3 mm AISI 304 stainless steel sheet - Welds are executed using appropriate stainless steel TIG welding b) Heating: - 2-inch stainless steel piping - Oil inlet and outlet pipes are 1 inch, DN50, PN16, DIN 2633 - Tightness test is carried out at a pressure of 6 bar c) Mixing system: - 3 kW, 60 rpm mixing motor - Drive is via sprockets - Leakproofness is ensured at the seals - Bearings are SKF or FAG - Fixed blades are mounted on the outer walls to improve dispersion and ensure a homogeneous mixture d) The temperature displays are both digital and analog, with two outputs provided - Bitumen pump capacity up to max. 8 m³/h - Coupled to 7.5 kW, 400 rpm gear motor - The bitumen meter is a system rated for 10 m³/h Ksdpox D Dd Sefx Af Ijdg a) Piping: - Steel pipes according to DIN 17175 (DN200, DN150, DN100, DN80, DN65, DN25) - The mill line is constructed with 1.5-inch inner pipe and 2-inch outer jacket pipe - Jacket pipes are welded according to TSE standards - Bridging pipes are 0.5 inch at appropriate locations b) Compensators: - DN50, DN80, PN16, 200°C c) 3-way and 2-way heated valves: - Conforming to TSE standards - Suitable for operating conditions at high pressure (16 bar) and high temperature (230°C) d) Hot oil valves: - Hot oil valve, make KLINGER or THERMO, heat-resistant - Sizes: DN25 PN16, DN65 PN16, DN50 PN16 e) Filter: - Equipped with a 3 mm wire inner container, easy and frequent cleaning possible - - The control panel is assembled in accordance with IC standards.