Suvirinimo diskas

MB POS 1 TW

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Löser centerless tube grinding machine - belt grinding machine - centerless tube polishing machine - cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1,100 mm. Ljdpfx Amopugwij Hjhf The machine was built in 1988 and was completely overhauled in 2012. During the overhaul, it was converted for polishing and has since only polished approx. 10,000 parts. After that, the machine was no longer in use. During the general overhaul, the motors, bearings, and the entire electrical cabinet with frequency converters were completely renewed. The machine can be used for both wet grinding and polishing. A wastewater treatment system including pumps is currently not available. We can retrofit this to your specifications upon request. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine is suitable for tube diameters from 10 mm to 160 mm. The grinding/polishing motors have a power output of 7.5 kW per station. The system can be inspected by appointment at our warehouse in D-63128 Dietzenbach.

Būklė: naudotas, Gamybos metai: 1969, Grinding height: 60 mm Grinding width: 120 mm Grinding wheel diameter: 600 mm Grinding length: mm Workpiece height: 60 mm Total power requirement: 50 kW Machine weight approx.: 7,000 kg Space requirement approx.: m DISKUS Vertical double-sided surface grinding machine in C-frame design with rotary table workpiece feed Model: DDS 600 CRA Year of construction: 1969 Serial no.: 6672 --- Lhjdpst Hw N Hofx Am Hjf Grinding wheels - diameter x bore per side: 600 x 150 mm Grinding wheel height approx.: 60 mm Workpiece transport disc outside Ø: 810 mm Workpiece: Max. grinding height x grinding width: approx. 60 x 120 mm Vertical quill adjustment per side: approx. 150 mm Hydraulic infeed pulses for depth feed: 0.0025 - 0.05 mm Outer diameter of transport disc: approx. 810 mm Rotary table feed rate steplessly adjustable: 14 – 145 mm/s Grinding wheel speed per side: (24 m/s) / 765 rpm Grinding spindle drive per side: 22 kW each Total drive: approx. 50 kW/380 V/50 Hz Total weight: approx. 7,000 kg Accessories / Special Equipment: • Workpiece rotary device for round transport discs with apertures for inserting the parts and with automatic ejection of finished parts down a chute into a transport box. • IONIC measuring control no. 9 So with measuring probe for finished workpiece height and, if necessary, with automatic hydraulic grinding wheel infeed. • Stepless speed regulation of the rotary device according to grinding dimensions and workpiece. • Manual infeed of grinding wheels via corresponding buttons. • hydraulically swivelling dressing device (RA) between both grinding wheels for simultaneous dressing of both grinding wheels with appropriate compensation and with automatic repositioning to effective workpiece thickness after dressing = high time savings, can be triggered manually or by timer. • Ammeter displays for both grinding spindle drives. * Central lubrication, • Mechanical height control of workpieces with machine shutdown if overheight is detected. • Free-standing control cabinet, separate hydraulic unit, separate large band filter unit, various grinding wheels, various transport discs, etc. This machine is especially suitable for simultaneous, plane-parallel grinding of workpieces in large series. For example: shims, piston rings, hydraulic components, watch parts, stamped parts, etc. Condition: good – soon available for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Gamybos metai: 1992, būklė: naudotas, Grinding height 50 mm Grinding width 120 mm Grinding wheel diameter 600 mm Total power requirement 85 kW Machine weight approx. 9,500 kg D I S K U S CNC-controlled, vertical double-sided surface grinding machine with rotating workpiece feed and IONIC measuring control. Type: DDS 600 III PRM - CNC Year of manufacture: 1992 # 7924 _____ Grinding wheel dimensions (each): 600 x 150 x 75 high mm Workpiece data: Grinding height: approx. 1.5 – 50 mm Grinding width: approx. 20 – 120 mm Vertical slide adjustment, each: approx. 150 mm Grinding wheel infeed via CNC: 0.0001 mm Workpiece transport device feed continuously adjustable: 40 - 235 mm/sec. Grinding wheel speed (30 m/s): 191–955 rpm Grinding spindle drive, infinitely variable (per spindle): 37 kW Total drive approx. 85 kW / 380 V / 50 Hz Weight approx. 9,500 kg Accessories / Special Equipment • SIEMENS CNC control SINUMERIK 810 G with monitor, for 4 axes (top and bottom infeed, dresser, and workpiece table rotation), direct input of all grinding data, and in conjunction with • IONIC measuring control no. 17 A with 2 measuring probes for scanning workpieces after the grinding cycle, triggers corresponding infeed of the grinding wheels, continuous measurement data displayed on the monitor for statistics, workpiece counting, etc. • Digital display of power (amperes) for the drive motors and the grinding wheel speed • Gantry design for increased rigidity and improved grinding accuracy • Rotational workpiece transport with continuously variable speed control as the 4th axis • Position control device for monitoring the position height of the lower grinding wheel • 2 adjustable workpiece hold-downs at both in-feed and out-feed, with height monitoring, simple raw part stacking device, and finished part discharge via conveyor belt • Semi-inclined, side-mounted grinding wheel dressing unit with pre-programmable dressing sequence, integrated as CNC axis in the control, with safety shut-off • Large separate switch cabinet, automatic central lubrication system, advanced pneumatic setup • Large PROMATEC (F) coolant unit with filtration and magnetic separator • Various grinding wheels, flanges, table segments, transport discs, large fume extraction system, etc. This machine is particularly suitable for the simultaneous plane-parallel grinding of workpieces in large series, such as stamped parts, piston rings, hydraulic parts, etc. Ljdpfx Ast Hw Nasm Hjhf Condition: good to very good – ready for demonstration shortly Delivery: ex stock – as inspected Payment: net – upon receipt of invoice This represents a rare opportunity regarding both condition and price. If you require another grinding machine – especially from the manufacturer DISKUS – please send us your inquiry.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2009, Options: ACB, BendGuard for manual bending, HQ version, interface to second machine Lhsdpfx Amowykccs Hef

Būklė: naujas, Gamybos metai: 2025, Protec welding turntable with 5,000 kg load capacity Continuously variable speed adjustable from 0.05 to 0.5 rpm Hand remote control Lhjdpfx Amsid Szce Hsf Height: 600 mm Diameter: 1,500 mm Foot remote control available at extra cost

Būklė: naujas, Prašome pilnai perskaityti techninius duomenis. Jei ši mašina Jums tinka kaip investicija, norėdami pateikti pasiūlymą prašome pilnai pateikti savo tapatybę su teisingu telefono numeriu ir el. pašto adresu. Ljdpfx Amjru E Svs Hehf Pluoštinis lazeris 30W Žymėjimo sritis: 200 x 200 mm Maksimalūs ruošinio matmenys: Pl x Al x G: 550 x 450 x 350 mm Lazerių tipas: Pluoštas 30 W Bangos ilgis: 1064 nm Didžiausias žymėjimo greitis: 7000 mm/sek. Z ašis motorizuota, aukštis: 700 mm Pakartojamumo tikslumas/objektyvas: +/- 0,001 mm Minimalus linijos plotis apie 0,01 mm Maitinimas: 240 V / 50 Hz Išoriniai matmenys: 110 x 80 x 200 cm Priekinės durys: rankinės Įskaitant programinę įrangą ir PC Galima apžiūrėti vietoje veikiantį prie elektros tinklo Kaina be PVM

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Su galimybe dirbti su detalėmis, kurių skersmuo nuo 1 iki 25 mm naudojant standartinę atramą arba nuo 25 iki 40 mm su specialia atrama, bei servo valdomu reguliavimo ratu, JHC 12S yra kompaktiškiausias centro be centrinės atramos šlifavimo staklių modelis asortimente. Tiksliai apdirbta hidrostatinių guolių sistema užtikrina minimalų trintį ir šoninį poslinkį bei ženkliai ilgesnį šlifavimo rato tarnavimo laiką net intensyvaus šlifavimo metu. Šlifavimo rato velenas montuojamas ant hidrostatinių guolių su itin plonu alyvos sluoksniu tarp visų sąlyčio taškų, taip sumažinant nusidėvėjimą ir pailginant veleno geometrijos pastovumą bei tarnavimo laiką. Reguliavimo ratas yra valdomas kintamo greičio varikliu, kuris užtikrina tikslų rato sukimosi greičio valdymą. Specifikacija Europa Jainnher JHC 12S Standartinės atramos darbinis skersmuo: 1 - 25 mm Pasirenkamos atramos darbinis skersmuo: 25 - 40 mm Šlifavimo rato matmenys (skersmuo x plotis x skylė): 305 x 150 x 120 mm Reguliavimo rato matmenys (skersmuo x plotis x skylė): 205 x 150 x 90 mm Lhjdpfxenzhuxo Am Hef Šlifavimo rato sukimosi greitis: 1900 aps./min. Reguliavimo rato greitis: 10 - 300 aps./min. (kintamas) Šlifavimo rato variklis: 7,5 AG Reguliavimo rato variklis: 2 AG Hidraulinės pompos variklis: 1 AG Aušinimo pompos variklis: 1 / 8 AG Reguliavimo rato padavimo rankenėlės eiga: 4 mm (aps.), 0,02 mm (tikslumas) Stalo padavimo rankenėlės eiga: 7 mm (aps.), 0,05 mm (tikslumas) Stalo mikro padavimo rankenėlės eiga: 0,2 mm (aps.), 0,001 mm (tikslumas) Dressavimo rankenėlės eiga: 1,25 mm (aps.), 0,01 mm (tikslumas) Reguliavimo rato posvyrio kampas: +5° / -3° Reguliavimo rato pasukimo kampas: ±5° Užimamas plotas (apytiksliai): 1750 x 1350 x 1400 mm Svoris (apytiksliai): 1600 kg Europa Jainnher JHC 12S centro be centrinės atramos šlifavimo staklės Standartinė komplektacija: - Šlifavimo ratas su tvirtinimo flanšu - Reguliavimo ratas su tvirtinimo flanšu - Flanšo ištraukiklis - Deimantinis įrankis - „Thrufeed“ tipo standartinė atrama ir ašmenys - „Infeed“ tipo standartinė atrama ir ašmenys - Lygiavimo varžtai ir plokštės - Įrankių dėžė ir įrankiai - „Thrufeed“ matavimo prietaisas - „Thrufeed“ apsauginis įtaisas - Darbo lempa

Būklė: naudotas, O F F E R We are pleased to offer you, ex stock and subject to prior sale and error: TSCHUDIN (CH) Centerless Grinding Machine Type TC-300 Year of manufacture: 2001 Grinding range – Ø: 0.5 – 25 mm (30) Max. workpiece length in plunge grinding: 125 mm (140) Max. workpiece length in through-feed grinding: 300 mm Grinding wheel size – Ø x width: Ø 300 x 125 mm (140) Regulating wheel size – Ø x width: Ø 225 x 125 mm (140) Grinding wheel peripheral speed: 35 m/sec Lhjdpfx Aswftt Ujm Hef Grinding wheel infeed: 3 mm Stepless regulating wheel speeds: 0 – 444 rpm Regulating wheel inclination: ° Grinding wheel drive approx.: 7.5 kW Total drive approx.: 13 kW – 380 V – 50 Hz Weight: 2,500 kg Accessories / Special Equipment: • The machine operates with a fixed workpiece position, which enables both the grinding spindle and the regulating spindle assemblies to be adjusted. This simplifies machine setup as well as automatic workpiece loading and unloading. • SIEMENS PLC control for automatic operation sequence with SIEMENS touchscreen. Complete electrics and PLC control were renewed in 2016! • Electromechanical regulating wheel dressing system • Stepless adjustment of regulating and grinding wheel rpm • Adjustable plunge grinding workpiece guide bridge with mounted support • Electromechanically actuated workpiece pusher & automatic pneumatic workpiece ejector • Additional outfeed cylinder for automatic tilting of workpieces after plunge grinding (adjustable 4–30 mm) • Machine is prepared for operation with HELP-TEC lift loader MSHL08/400P (not included) • Complete machine enclosure with monitoring technology • Separate control cabinet, operating manuals, and electrical diagrams of the retrofit Condition: Very good! Machine upgraded with new electronics in 2016. Click here for a video of the machine: Delivery: Ex stock, immediate availability, FCA Metzingen Payment: strictly net – upon receipt of invoice Always a large selection of grinding machines in stock – please inquire for your specific requirements!

Būklė: naujas, Gamybos metai: 2024, keliamoji galia: 3 000 kg, 3,000 kg load capacity welding positioner, very robust. Infinitely variable speed adjustment from 0.05 to 0.7 rpm. Turntable diameter: 1,400 mm. Tilting up to 135°. Height in horizontal position: 1,465 mm, tilted to center: 1,265 mm. Length: 2.12 m x width: 1.4 m. Equipped with handheld remote control and dual foot pedal. Lhjdetuqd Uopfx Am Hjf

Būklė: naudotas, Gamybos metai: 2000, Centro aukštis: 280 mm Centro atstumas: 1 200 mm Sukimosi skersmuo virš lovos: 570 mm Sukimosi skersmuo virš suporto: 365 mm Sukimo ilgis: 1 000 mm Špindelio tvirtinimas: DIN 55027 Gr. 8 Valdymas: SIEMENS Sinumerik 810 D Lovo plotis: 360 mm Špindelio skylė: 62 mm Sukimosi greičio diapazonas: 3 - 2 500 aps./min Pastūmos greitis: 5 000 mm/min Greita eiga – išilgai/planas: 10 m/min Lhedpfxox E Dn Ao Am Hof Trijų žandikaulių griebtuvo skersmuo: 250 mm Greito keitimo laikiklis: SANDVIK Coromant Capto Špindelio variklio galia: 25 kW Konusas grąžto atraminėje įvorėje: MK 5 Atraminės įvorės skersmuo: 100 mm Atraminės įvorės eiga: 190 mm Darbinė įtampa: 400 V Staklių svoris: apie 5,0 t Užimama vieta: apie 3,55 x 2,20 x 1,95 m - Gamyklos Nr.: 2022-3742-03 - Valdymas: SIEMENS Sinumerik 810 D - Greita eiga - Aušinimo sistema - Mašinos apšvietimas