Mechaninio apdirbimo centras

Mazak FJV-200

Sąlyga: naudotas, TECHNICAL DATA - Number of Axes: 5 MILLING SPINDLE - Tool Holder: BT40 - Spindle Drive Power: 24/32 [kW] - Spindle Speed: 12,000 [rpm] - Spindle Hours: 9,122 [h] LINEAR AXES - Travel X/Y/Z Axes: 650/765/520 [mm] - Rapid Traverse Speed (X/Y/Z): 40/40/36 [m/min] - Feed Rate (X/Y/Z): 18/18/18 [m/min] SWIVEL AXIS A - Travel: 150 [degrees] (+/-) - Rapid Traverse Speed: 20 [rpm] - Feed Rate: 7,200 [mm/min] SWIVEL AXIS B - Travel: 360 [degrees] (+/-) - Minimum Resolution: 0.001 [degrees] - Rapid Traverse Speed: 30 [rpm] - Feed Rate: 7,200 [mm/min] TOOL CHANGER - Tool Changer Type: Bras charger - Number of Tools in Magazine: 120 - Tool Change Time: 1 [sec] TABLE - Table Size: 500 x 500 [mm] - Max. Table Load: 500 [kg] - Distance from Table to Spindle Nose: 160/680 [mm] PALLET CHANGER - Pallet Size: 500 x 500 [mm] - Number of Pallets: 2 - Pallet Change Time: 30 [sec] ELECTRICAL SUPPLY - Total Power Consumption: 54 [kW] MACHINE OPERATING HOURS Djdpfeuhbz Uex Ab Sjkg - Powered On Hours: 24,226 [h] - Operating Hours: 9,122 [h] ACCESSORIES - Control: Heidenhain TNC530 - Interface: RS232 / USB / PCMCIA - Electronic Handwheel - 3-color Status Lamp - Coolant Tank * with High Pressure Pump: 20 [bar] - Through-spindle coolant supply (IKZ) - Chip Conveyor - Spindle Cooling - Tool Measuring Probes: Renishaw - Electrical Transformer

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Maximum bar diameter: 32 mm - Travel distance: 310 mm - Spindle speed: 280 - 7,000 rpm - Spindle drive power: 7.5 kW - Minimum C-axis resolution: 0.01° SUB SPINDLE - Maximum bar diameter: 32 mm - Z travel distance: 150 mm - Spindle speed: 280 - 7,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.01° - Number of turrets: 1 UPPER TURRET - Number of positions: 10 - Number of driven positions: 10 - Driven tool speed: 5,700 rpm - Driven tool power: 2.8 kW BUSH HOLDER 1 - Number of positions: 4 - Number of driven positions: 3 - Driven tool speed: 6,000 rpm ELECTRICAL SUPPLY - Supply voltage: 200 V - Total power consumption: 8 kVA WEIGHT AND DIMENSIONS - Footprint: 2,645 x 1,403 mm - Machine height: 1,680 mm - Machine weight: 3,880 kg Djdpfx Ajuha Eljb Sjkg EQUIPMENT - Control unit: Fanuc 16 iTB - 3-color status tower - Parts catcher - Parts conveyor belt - Chip conveyor - Coolant tank - Bar feeder: IEMCA BOSS 432/32LL - Electrical transformer

Sąlyga: naudotas, Gamybos metai: 2011, X-axis travel: 1,016 mm Dkedpjwvl Apofx Ab Sog Y-axis travel: 660 mm Z-axis travel: 635 mm Control: Haas Table clamping surface: 1,372 x 610 mm Table load capacity: 1,814 kg Rapid traverse: 18 m/min Spindle speed range: 7,500 rpm Spindle motor power: 22.4 kW Tool holder: SK 50 Number of tools in magazine: 30 Machine weight approx.: 7.5 t Dimensions (L x W x H): 3.5 x 2.47 x 2.98 m Vertical machining center. - Spiral chip conveyor - Double-arm tool changer - External handwheel - Internal coolant supply - Cartridge filter

Sąlyga: naudotas, TECHNICAL SPECIFICATIONS - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 25.4 [mm] - Max. machining length: 195 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 8.2 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 25.4 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 8.2 [kW] - Minimum C-axis resolution: 0.001 [degrees] TOOL HOLDER 1 - Number of positions: 9 - Number of driven positions: 4 - Driven tool speed: 5,000 [rpm] TOOL HOLDER 2 - Number of positions: 8 SUB MACHINING - Number of positions: 8 - Number of driven positions: 4 - Driven tool speed: 7,500 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] WEIGHT AND DIMENSIONS - Footprint: 2,912 x 1,300 [mm] - Machine height: 1,720 [mm] - Machine weight: 2,400 [kg] Dkedpfxeuha U Hs Ab Ssg MACHINE HOURS - Power-on hours: 44,140 [hrs] - Operating hours: 28,118 [hrs] - Spindle hours: 15,281 [hrs] EQUIPMENT - CNC control: Fanuc 31i-B - 3-color status light tower - Driven tool motorization at: S11, S51 - Powered guide bushing - Part catcher - Parts conveyor - Parts ejector - Chip conveyor - Coolant tank: KNOLL KF 200/1200 * with high-pressure pump - Bar feeder: Tornos Robobar SBF 326 - Fire extinguishing system * NB: Functionality not guaranteed. Must be checked by a qualified company appointed by the buyer.

Sąlyga: labai geros būklės (naudotas), Telescopic drawer cabinet with 7 drawers: 2 drawers, 75 mm high; 3 drawers, 100 mm high; 1 drawer, 160 mm high; and 1 drawer, 220 mm high. Width: 1,015 mm; Depth: 810 mm; Height: 1,045 mm. Height including pallet: 1,200 mm. Weight with pallet: 270 kg. Dedpow Au Alsfx Ab Sekg

Sąlyga: naudotas, x-travel 1050 mm y-travel 600 mm Djdpfxovnh Ume Ab Sskg z-travel 600 mm Control: Fanuc Machine weight approx. 7200 kg 8000 rpm Tool holder: 24

Gamybos metai: 2003, Sąlyga: geras (naudotas), Travels: 560 x 410 x 510 mm, table: 900 x 410 mm, 30-tool magazine, spindle: 12,000 rpm, chip conveyor. Djdeiwkhkspfx Ab Sjkg

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 415 mm, tekėjimo ilgis: 850 mm, tekėjimo skersmuo: 390 mm, veleno skylė: 105 mm, veleno greitis (maks.): 2 000 aps./min, X ašies eiga: 225 mm, Z ašies eigos atstumas: 950 mm, greitas poslinkis X ašimi: 15 m/min, greitasis eiga Z ašyje: 15 m/min, bendras aukštis: 1 980 mm, bendras ilgis: 4 600 mm, bendras plotis: 1 900 mm, quill skersmuo: 100 mm, plunksnos brūkšnys: 120 mm, bendras svoris: 7 000 kg, strypo praėjimas: 90 mm, įvorės išorinis skersmuo: 300 mm, valdiklių gamintojas: Siemens, valdiklio modelis: 828D + Shopturn, Įranga: dokumentacija / vadovas, max. turning diameter: 390 mm Z-axis travel: 950 mm max. spindle speed: 2,000 rpm AC spindle motor SIEMENS (cont./15min): 25/33 kW bar capacity: 90 mm spindle nose: A2-11 Including accessories, among others: SAUTER 12-station turret VDI-40 Trifix interface for driven tools C-axis with spindle clamp and stabilization wide and sturdy flat guides 45° slant bed for optimal chip flow hinged belt chip conveyor with chip bin Dedsfk Et Ajpfx Ab Sokg 3-jaw Kitagawa power chuck ø 300 mm manual swing-type tool measurement hydraulic tailstock manually adjustable with programmable quill coolant system with high-performance pump (4 bar) Rittal filter fan on control cabinet

Sąlyga: geras (naudotas), Gamybos metai: 2011, CNC Machining Center Fanuc Robodrill α-T21iFa TECHNICAL DATA Manufacturer: Fanuc Model: Robodrill α-T21iFa Year of manufacture: 2011 Control unit: Fanuc Series 31i-MODEL A5 Spindle speed: up to 10,000 rpm Travel range X-axis: 300 mm Travel range Y-axis: 300 + 100 mm Travel range Z-axis: 330 mm Dkedpoxflxajfx Ab Seg Rapid traverse in X, Y, Z: 54 m/min Tool magazine: 21 stations Max. tool weight: 2 kg Total tool weight: 23 kg Max. tool diameter: 80 mm Permissible table load: 200 kg Machine weight: 2,050 kg Power supply: 200/220 V, 3-phase, 50/60 Hz Connected load: 1.5 kVA SCOPE OF DELIVERY Includes (not exhaustive): - CNC machining center Fanuc Robodrill α-T21iFa - Coolant pump and chip tray The precise scope of supply is as per the photo documentation. The Fanuc Robodrill α-T21iF machining center from 2011 impresses with its high precision and dynamic performance in a compact design. With travel ranges of 300 mm in X, 300 + 100 mm in Y, and 330 mm in Z, this machine offers versatile machining capabilities. The tool changer with 21 positions ensures flexible production processes and minimizes setup times. The spindle reaches speeds up to 10,000 rpm, enabling both fine finishing operations and high-performance machining to be carried out efficiently. The Fanuc Series 31i-Model A5 control unit facilitates comfortable and reliable programming. Thanks to a maximum workpiece load of 200 kg and its compact footprint, the machine is ideally suited for universal use in both single-part and series production. No guarantee is given for the correctness, completeness or currentness of the information provided.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2013, X ašies eiga: 700 mm, Y ašies eiga: 400 mm, Z ašies eigos atstumas: 300 mm, greitas poslinkis X ašimi: 50 m/min, greitas poslinkis Y ašis: 50 m/min, greitasis eiga Z ašyje: 50 m/min, X ašies padavimo greitis: 10 m/min, Y ašies padavimo greitis: 10 m/min, padavimo greitis Z ašis: 20 m/min, valdiklių gamintojas: Brother, valdiklio modelis: CNC-B00, stalo plotis: 400 mm, stalo ilgis: 800 mm, stalo apkrova: 250 kg, veleno greitis (maks.): 16 000 aps./min, - Achsenanzahl: 4 FRÄSSPINDEL - Werkzeugaufnahme: BT30 - Spindelleistung: 7,4 / 4,9 [kW] - Spindeldrehzahlen: 16.000 [U/min] Dodeulwztjpfx Ab Sjkg LINEARACHSE - Verfahrwege X/Y/Z: 700 x 400 x 300 [mm] - Eilgang (X/Y/Z): 50 / 50 / 50 [m/min] - Arbeitsvorschub (X/Y/Z): 10 / 10 / 20 [m/min] - Abstand Tisch / Spindelaufnahme (min./max.): 180 - 480 [mm] WERKZEUGWECHSLER - Automatik-Werkzeugwechsler: Schirm-Magazin (Umbrella) - Werkzeugmagazinkapazität: 21 - Werkzeugwechselzeit: 1,4 [sek.] TISCH - Tischgröße: 800 x 400 [mm] - Maximale Tischbelastung: 250 [kg] STROMVERSORGUNG - Betriebsspannung: 220 [V] - Gesamtanschlussleistung: 9,5 [kVA] GEWICHT & ABMESSUNGEN - Stellfläche der Maschine: 2.050 x 2.207 [mm] - Maschinenhöhe: 2.592 [mm] - Maschinengewicht: 2.400 [kg] AUSSTATTUNG - CNC-Steuerung: Brother CNC-B00 - Schnittstellen: Ethernet / USB - Drei-Farben-Statusleuchte - Vorbereitung für Roboterbeladung: rechtsseitig - Teilapparat: vollwertige 4. Achse * Hersteller: LEHMANN EA-510 * Verfahrweg 4. Achse: 360 [°] * Indexiergenauigkeit der 4. Achse: 0,001 [°] * Mittenhöhe: 150 [mm] - KÜHLMITTELTANK - Spindeldurchgehende Kühlung * mit Hochdruckpumpe: 15 [bar] - Späneförderer: Hinten HAKUSAN - Ölnebelabscheider: SARA UC1SD - Elektroschalttransformator: 400 / 220 [V]