Kelių kryžminių pjūklų pjūklas

Martek

Būklė: beveik kaip naujas (naudotas), Handhabungstechnik für eine Keilzinkenanlage. Lredpfx Asd Duz Eom Hsk Rollenförderer, Breit- und Schmalbandförderer, ein Trimmersägen-Förderer, Trimmersägen usw. Siehe Bilder. Mit Dokumentation. Guter Zustand, hergestellt von Martek in Finnland.

Gamybos metai: 1993, būklė: geras (naudotas), Tensioning Carriage Braun WES fully hydraulic with auxiliary carriage with rails track width: 79 cm good condition – immediately available Please also check my other listings. I look forward to your inquiry. Lredpefuh Dyjfx Am Hok

Gamybos metai: 2001, būklė: geras (naudotas), Heavy-duty roller conveyor, 2 pieces, motorized Construction height: 600 mm Width: 1400 mm Length: 7000 mm Lrsdpfx Amsh Icrno Hsk All dimensions are approximate System is immediately available, already dismantled

Gamybos metai: 2001, būklė: naudotas, Fully automatic feeding system for finger jointing line Maximum table width: 620 mm Spinfeeder Automatic length sorting for 3 lengths Package forming: 3 x Buffer Package turner Package destacking Manual feeding Buffer before finger jointing unit with 6 compartments Ljdpfxoh Icims Am Hsrk Specification: Wood infeed length: min. 150 mm, max. 600 mm Wood cross-section: min. 20 x 40 mm, max. 80 x 180 mm Capacity: 6 milling tables/min Working height: 960 mm Table width: 620 mm Line width: Line length: See pictures The system is immediately available, already dismantled

Gamybos metai: 1998, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Very robust gantry roller conveyor with hydraulic lifting and lowering cross conveyor. Part 1: Length 7,100 mm. Roller length 2,000 mm. Roller diameter 220 mm. Height 1,000 mm. Integrated hydraulically operated lifting and lowering cross conveyor Lrodpjt Hg Hujfx Am Hek with 4 chain strands. Spacings: 1,500 - 1,300 - 1,000 mm. Fully sheeted. Hydraulic support rollers. Driven by geared motor. New bearings. Part 2: Length 7,200 mm. Roller length 1,600 mm. Conveyor length 6,100 mm. Integrated hydraulically operated lifting and lowering cross conveyor with 6 chain strands. Cantilevered, allowing the sawn goods to be conveyed to the left or right under the roller conveyor. Fully sheeted. Including hydraulic power unit for both roller conveyors.

Gamybos metai: 1988, būklė: reikia remonto (naudotas), Mechanizavimas įvedimui prieš obliavimo stakles, tinkama KVH/BSH ir pan. Rekomenduojama ruošiniams iki maždaug 13 m ilgio. Ideali KVH ir BSH linija prieš obliavimo stakles. Išilginis iškrovimas – gaminių atskyrimas. 4 vnt. šoniniu būdu reguliuojamų diskinio pjūklo atpjovimo įrenginių. Pjūvio matmenys: 180 x 220 mm, 150 x 300 mm. Užtenka vieno operatoriaus. Ledsvbtpopfx Am Hsrk

Būklė: naudotas, Gamybos metai: 2006, Parduodamas: LBL Brente medienos transportavimo vežimėlis su žieve staklėmis – pagaminimo metai 2006 Parduosime visą seriją įrenginių iš medienos pjovimo cecho. Tai yra pirmasis šios serijos įrenginys – stebėkite mūsų svetainę dėl kitų pasiūlymų. Lrodpjx Ndpbsfx Am Hsk Matmenis ir techninius duomenis rasite PDF dokumentuose.

Būklė: geras (naudotas), Gamybos metai: 1992, Single Piece Wood Sander Lodpfjwyda Uox Am Hork Sanding top & bottom Electric height adjustment with digital display Continuously adjustable feed speed Star-delta start-up Pneumatic belt tensioning Main switch Sanding belt oscillation Top and bottom finishing brush unit, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Sanding belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Incl. infeed & outfeed roller conveyor, L = 1600 mm, non-driven Note on used machines: • Technical details and prior sale subject to change. • Stated prices are ex works (location) - loaded free of charge! • Machines have been cleaned and function-tested. • All machines are sold as seen without any warranty. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Enquiries will only be answered if you provide your address and telephone number!)

Būklė: naudotas, No. 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, Year of Manufacture: 2017 Thermal treatment plant / thermo-chamber for wood modification The WTT thermo-chamber is a facility for the thermal modification of wood. It enables efficient processing of 2 to 3 batches per day, depending on the thickness and type of wood. The plant features a powerful energy and heat transfer system and operates with a gas- or oil-fired boiler unit using thermal oil as the heat transfer medium. Technical details: Capacity: 5,950 - 9,900 m³ timber per year (based on 330 working days) Effective volume: 9 m³ (at 50 mm wood thickness) Stack dimensions: 10,500 x 1,300 x 1,100 mm (L x W x H) Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + neutral + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heating output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Operating pressure: 0.1 to 15 bar (absolute) Operating temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized steel sheet Main components: 1. Autoclave for thermal treatment 2. Vacuum system to evacuate the autoclave before heating 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. Nitrogen generator 6. Gas cooling system Heating and cooling system: Heat exchangers: 8 units (4 per side) Material: Stainless steel tubes (seawater resistant) Total surface area: 165 m² Cooling water consumption: 1,000 l/batch (not contaminated, heated only) Control and operation: Control system: WTT ExoT (fully automatic) Displays: 22" color monitor with IBM computer and printer Sensors: 4 x PT100 temperature sensors 2 x mechanical thermometers 1 x vacuum/pressure transmitter 1 x mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for easy trolley movement Automatic trolley extraction with winch (1.5 kW) 2 MW thermal oil boiler (heating) Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6,000 mm length) Functional description: 1. Loading the autoclave with wood 2. Creating pre-vacuum 3. Filling with gas 4. Heating 5. Modification 6. Cooling 7. Pressure equalisation 8. Creating post-vacuum / drying 9. Pressure equalisation 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Design according to EN 13445 Sale on behalf of a customer, ex location near 5020 Salzburg (Austria), without dismantling, transport, or installation Dismantling, loading, and transport by us available on request Errors in description and price reserved To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Lrodpfsv Si Szjx Am Hsk Sale as-is Technical information, condition description, year of manufacture and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; it applies: "purchased as inspected" Pictures and videos serve as samples and do not reflect the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or shipping Delivery terms: ex location

Būklė: geras (naudotas), Gamybos metai: 2006, mašinos/transporto priemonės numeris: 108111, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 240 mm, obliavimo aukštis: 160 mm, darbinio aukščio: 180 mm, Four-sided planer after maintenance, machine weight 3,900 kg. Ljdevrq U Djpfx Am Hsrk