Wp Kūginė Apvalinimo Staklės pirkti naudotą (48 704)

Būklė: labai geros būklės (naudotas), 324 NAUDOTAS kūginis apvalintuvas WP. Iisdpfsyrdpxex Abvob IŠORINIAI MATMENYS (cm): - aukštis 150, - plotis 110, - ilgis 120. Galimos papildomos mokamos parinktys: transportas. Nurodyta kaina yra be PVM. KALBAME ANGLŲ, VOKIETIJOS, PRANCŪZŲ, RUSŲ, UKRAINIEČIŲ KALBOMIS. Mūsų pasiūloje rasite: kepyklų krosnis, vežimėlių krosnis, daugiapakopes krosnis, konditerijos krosnis, parduotuvių krosnis, kepyklų mašinas, duonos linijas, bandelių linijas, pyragų linijas, kruasanų linijas, bagetų mašinas, maišykles, maišytuvus, kočiokles, ragelių formavimo mašinas. Peržiūrėkite visus mūsų skelbimus.

Būklė: naujas, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €28,450 Leasing rate: €543.40 Bending length: 1,550 mm Max. bending capacity - mild steel: 7 mm Max. plate thickness (without pre-bending) at D = 5x upper roll: 7 mm Max. plate thickness (without pre-bending) at D = 1.5x upper roll: 4.5 mm Max. plate thickness (with pre-bending) at D = 5x upper roll: 4.5 mm Max. plate thickness (with pre-bending) at D = 1.5x upper roll: 3.5 mm Upper roll diameter: 150 mm Lower roll diameter: 150 mm Side roll diameter: 130 mm Rolling speed: 1.5 / 6 m/min Motor power: 4 kW Length: 3,750 mm Width: 960 mm Height: 1,100 mm Weight: 2,500 kg 4 rolls Upper roll drive via hydraulic motor and planetary gearbox, lower roll drive via gearwheel and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic release of upper roll Hydraulic drop-end 2 working speeds Overload protection Ijdpsyb Szhefx Abveib Mobile control panel Equipment in accordance with CE regulations OPTIONS: (Delivery time with options approx. 10 weeks) Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: The max. plate thickness is 50% of the nominal capacity The cone length must be a maximum of 30% or more than 60% of the roll length Hardened rolls are recommended

Būklė: labai geros būklės (naudotas), Gamybos metai: 1997, ritinėlių skaičius: 4, apatinio volelio skersmuo: 280 mm, viršutinio volo skersmuo: 200 mm, šoninio volelio skersmuo: 280 mm, vėjo ilgis: 3 000 mm, maks. lakšto storis: 6 mm, bendras svoris: 7 250 kg, bendras ilgis: 6 000 mm, bendras plotis: 2 000 mm, bendras aukštis: 2 000 mm, galia: 6 kW (8,16 AG), 4 volų apvalinimo staklės HAEUSLER - VRM-HY MACH-ID 9604 Gamintojas: HAEUSLER Tipas: VRM-HY Valdymas: HAEUSLER CNC Pagaminimo metai: 1997 Iiodey Expuepfx Abvjb Vientiso volo plotis: 3000 mm Lakšto storis prie 3x viršutinio volo Ø: 4 mm Lakšto storis prie 5x viršutinio volo Ø: 6 mm Lakšto storis prie įlenkimo: 3 mm Viršutinio volo Ø: 200 mm Apatinio volo Ø: 280 mm Šoninių volų Ø: 280 mm Volų skaičius: 4 Lenkimo greitis: 0–5 Apatinio volo reguliavimas: 0–200 mm/min. Šoninio volo reguliavimas: 0–200 mm/min. Varomų volų skaičius: 2 Galia: 6 kW Ilgis: 6000 mm Plotis: 2000 mm Aukštis: 2000 mm Svoris: 7250 kg Atkreipkite dėmesį: informacija šiame puslapyje surinkta pagal mūsų geriausias žinias ir, kiek galima, iš gamintojo. Informacija pateikiama sąžiningai, tačiau tikslumas negarantuojamas. Todėl tai nėra pasiūlymas ar sutarties sąlygos. Rekomenduojame patikrinti visą svarbią informaciją.

Būklė: naudotas, Gamybos metai: 2000, Technical Details: Maximum wheel diameter: 275 mm Wheel width: 55 mm Maximum module: 6.5 Minimum module: 1.5 Face Hobbing – Continuous Process Continuous method: Workpiece and tool (usually Spiron) rotate simultaneously; all teeth are generated in a single operation at once. The cutter head contains several groups of cutters (not arranged in a circle). Teeth of constant height (parallel-height tooth). Conical tooth top surface. Single Indexing Process: The workpiece is stationary and the tool (usually Arcon) rotates and cuts one tooth by plunging into the material. Once a tooth is cut, the tool retracts, the workpiece indexes by one tooth pitch, and the next tooth is cut. This process continues until all teeth are completed. The cutter head has all cutters arranged along a circular path. Conical tooth height. Parallel tooth top surface. The C28 is capable of both wheel and pinion machining. However, for the single indexing process, the C28 must be appropriately configured. This requires a direct measurement system, a part-drive brake for the workpiece axis, and a license file for single indexing operation. Iiedsv N Hilepfx Abvjb

Būklė: naudotas, bendras ilgis: 4 500 mm, bendras plotis: 900 mm, bendras aukštis: 1 650 mm, Spalva: Pilka Tuščias svoris: 3.000 kg - Dokumentacija prieinama: Ne - CE sertifikatas: Ne - Serijos numeris: 8419012 - Valdymas: Konvencinis - Pavara: Mechaninė - Volelių skaičius [vnt.]: 3 - Varomų volų skaičius [vnt.]: 3 - Galia [kW]: 7,7 - Didžiausias lakšto storis [mm]: 3 - Didžiausias darbinis plotis [mm]: 3040 - Viršutinio volo skersmuo [mm]: 150 - Apatinių volų skersmuo [mm]: 150 Iedeyn Abfepfx Abvsib - Transportavimo matmenys: 4500mm x 900mm x 1650mm (ilgis x plotis x aukštis) - Transportavimo svoris [kg]: 3000kg - Transportavimo paketų skaičius [vnt.]: 1 Finansinė informacija PVM: Nurodyta kaina be PVM PVM/PVM skirtumo apmokestinimas: PVM atskaitomas verslui Pristatymas ir atpirkimas galimi bet kuriam pramoniniam įrenginiui Lukas van Rossum

Būklė: naudotas, Elektrinis pavara Ciklo paleidimas per kojinį jungiklį Į komplektą įeina įvairūs įrankiai: Iijdpjythzujfx Abveb 1 x viršutinis/apatinis peilis su 4 mm spinduliu 1 x viršutinis/apatinis peilis su 6 mm spinduliu 1 x viršutinis/apatinis peilis su 7 mm spinduliu 1 x viršutinis/apatinis peilis su 8 mm spinduliu 1 x viršutinis/apatinis peilis su 9 mm spinduliu 1 x viršutinis/apatinis peilis su 15 mm spinduliu (šiuo metu sumontuotas)

Būklė: naudotas, Gamybos metai: 1998, Workpiece diameter with 1:10 transmission: 300 mm Iijdpeul El Tsfx Abvob Workpiece diameter with 1:1 transmission: 212 mm Number of teeth – max.: 200 Number of teeth – min.: 6 X-axis travel: 300 mm X-axis speed: 0.1–5,000 mm/sec Y-axis travel: 400 mm Y-axis speed: 0.1–5,000 mm/sec A-axis: -170° / +170° Control: Siemens Sinumerik 840 C Total power requirement: 38 kW Machine weight approx.: 10 t Space requirement approx.: 4.20 x 2.20 x 2.10 m

Būklė: geras (naudotas), Gamybos metai: 1978, Pitch circle diameter max: 152 mm Number of teeth: 8-50 pcs Weight: 7,500 kg Technical Specifications – Min./max. root cone angle: 15° / 55° – Pitch circle diameter: 152 mm – Max. tooth height with 21° finish cutter head: 10.7 mm – Max. tooth width at the root with 21°: 28 mm – Cutter head diameter: 200 mm – Tooth number range: 8–50 – Max. cutter head diameter: 0.21" Workpiece Spindle – Diameter of taper bore at large end: 99.219 mm – Clamping length on 304.8 mm length: 15.478 mm – Taper depth: 15.875 mm – Total spindle bore diameter: 22.225 mm The GLEASON 726 REVACYCLE bevel gear cutting machine manufactures workpieces with the highest precision and accuracy. The root angle range is 15° to 55°, and the bevel gear is processed at a high speed of 49.7 m/min. The GLEASON NO 726 machine weighs approximately 9 tons. Technical Specifications of the GLEASON 726 REVACYCLE Bevel Gear Cutting Machine Maximum tooth height: 14.8 mm Maximum tooth width at root: 28 mm Maximum root angle: 55° Minimum root angle: 15° Cutter head speed: 32.6-49.7 m/min Feed rates (seconds per tooth): 2-3.1 Indexing range: 8-50 mm Diameter of taper bore at large end: 99 mm Taper per foot: 15.4 mm Depth of taper: 15.8 mm Counterbore behind taper: 57.2 x 77.9 mm Spindle through bore diameter: 22.3 mm Main drive motor power: 10 HP Main drive motor speed (60 Hz/50 Hz): 1800/1500 rpm Hydraulic motor speed (60 Hz/50 Hz): 1800/1500 rpm Coolant pump speed (60 Hz/50 Hz): 3600/3000 rpm Iiedpjxq Hgcjfx Abvsb Chip conveyor motor speed (60 Hz/50 Hz): 1800/1500 rpm Space requirement (L x W): 320 x 221 cm Total weight of the 726 REVACYCLE machine: approx. 9 t

Būklė: naudotas, Kūginis atstumas min./maks. 0–108 mm Posvyrio kampas min./maks. 5°/84° Iisdpoyh Rmmjfx Abvsb Valdymas: GE Fanuc Series 0-GC Žingsnio skersmuo (santykis 1:1) 152 mm Žingsnio skersmuo (santykis 10:1) 216 mm Skersmenų atstumas (smulkiausias/stambiausias) 1,3/8,5 Mod. Didžiausias krumpliaračio galvos plotis 35 mm Pjovimo veleno sūkių diapazonas 41–121 aps./min. Darbinio veleno sūkių diapazonas 0–33,33 aps./min. Svoris 9025 kg Užimamas plotas apie 2707 x 2720 x 2200 mm Įranga/priedai: - Pjovimo peiliai - Drožlių transporteriai - Techninė dokumentacija

Būklė: naudotas, Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, galia: 1,5 kW (2,04 AG), įėjimo dažnis: 50 Hz, Siūlome šį naudotą Hog Maschinen ABRADE MASTER PRO nuožulų ir užapvalinimų šlifavimo įrenginį, pagamintą 2009 metais. Iiedpfey Ir H Sex Abveb Pagaminimo metai: 2009 Nominali įtampa: 400 V Dažnis: 50 Hz Pagrindinio variklio nominali galia: 1,5 kW Pagrindinio variklio nominali srovė: 16 A Antrinio variklio nominali galia: 0,12 kW Nuožulų ir užapvalinimų šlifavimo įrenginys Nuostatos reguliuojama nuolydžio fazė 0–12 mm Užapvalinimo spindulys 2–15 mm Komplekte yra padavimo sistema ir stovas Aprašymas: Juostos pavara su papildoma elektrine osciliacija Pasiūlos 4 greičiai Ištraukimo jungtis Suslėgto oro jungtis juostos valymui Jeigu turite klausimų arba reikia daugiau informacijos – rašykite arba skambinkite mums.

Būklė: naudotas, Gamybos metai: 1994, bendras ilgis: 6 300 mm, bendras plotis: 2 000 mm, bendras aukštis: 1 800 mm, Svoris be krovinio: 24.000 kg Kaina: Pagal užklausą Isdjxyklnopfx Abvoib - Pagaminimo metai: 1994 - Dokumentacija prieinama: Ne - CE sertifikatas: Nėra - Serijos numeris: 10659 - Valdymas: Konvencinis - Volelių skaičius [vnt.]: 4 - Maks. lakšto storis [mm]: 25 - Maks. darbinis plotis [mm]: 3000 - Viršutinio volo skersmuo [mm]: 350 - Apatinių volelių skersmuo [mm]: 300 - Transportavimo matmenys: 6300 mm x 2000 mm x 1800 mm (ilgis x plotis x aukštis) - Transportavimo svoris [kg]: 24000 kg - Transportavimo pakuotės [vnt.]: 1 Finansinė informacija PVM: Nurodyta kaina be PVM PVM/PVM atskaita: PVM atskaitomas įmonėms Pristatymas ir dalinis apmokėjimas galimi bet kokiai pramoninei įrangai Lukas van Rossum

Būklė: geras (naudotas), Gamybos metai: 2002, Wheel diameter - max. 275 mm Wheel width 55 mm Module - max. 6 Iiodpjtumrpjfx Abvsb Module - min. 1 Control system 840 C Siemens Total power requirement 100 kW Machine weight approx. 16.7 t Space requirement approx. 5.2 x 2.3 x 2.4 m

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, ratlankio skersmuo: 275 mm, ratlankio plotis: 150 mm, X ašies eiga: 640 mm, Y ašies eiga: 870 mm, ruošinio skersmuo (maks.): 275 mm, TECHNICAL DETAILS Wheel diameter: 275 mm Wheel width: 150 mm Max. module: 6 Min. module: 1.5 Workpiece diameter: 275 mm Max. face width: 5.5 mm Helix angle: 0 - 60° Number of teeth: 5 - 120 Min. transmission ratio: 1:1 Iiedpfxjywgy Sj Abvsb Max. transmission ratio: 1:10 Milling Depth Axis (X Axis) Travel: -25 to 640 mm Max. rapid traverse: 6 m/min Workpiece Positioning Axis (Y Axis) Travel: 870 mm Max. rapid traverse: 4.5 m/min Axis Offset (Z Axis) Travel range: +/- 50 mm Max. rapid traverse: 0.657 m/min Generating Rotation Axis (A Axis) Swivel range: 315° Max. swivel speed: 40°/s Workpiece Spindle (B Axis) Max. spindle speed: 300 rpm External taper (1:4) mounting diameter: 140 mm Internal taper (1:20): 99.218 mm Workpiece spindle bore: 90 mm Workpiece Swivel Axis (C Axis) Swivel range: -8.5 to 98° Max. swivel speed: 21.5°/s Tool Spindle (D Axis) Tool spindle speed: 60 to 350 rpm Tool Positioning Axis (E Axis) Swivel range: 0 to 360° Max. swivel speed: 19.5°/s Machine Distance (V Axis) Travel: 150 mm Max. rapid traverse: 1.6 m/min MACHINE DETAILS Cutter drive motor Power: 20 kW Workpiece drive Power: 14.5 kW Total connected load: 62 kVA Dimensions & Weight Machine weight: approx. 12 t Space required: approx. 4,700 x 4,387 x 2,450 mm EQUIPMENT 13 cutters

Būklė: naujas, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €134,000 Leasing rate: €2,532.60 Bending length: 3,100 mm Max. bending capacity – structural steel: 25 mm Max. sheet thickness without prebending at D=5x top roll: 25 mm Max. sheet thickness without prebending at D=3x top roll: 20 mm Max. sheet thickness without prebending at D=1.5x top roll: 20 mm Max. sheet thickness with prebending at D=5x top roll: 20 mm Max. sheet thickness with prebending at D=1.5x top roll: 16 mm Top roll diameter: 360 mm Iiedpoypbquefx Abvsb Bottom roll diameter: 360 mm Side roll diameter: 270 mm Maximum opening: 60 mm Working height: 1,510 mm Motor power: 22 kW Length: 5,560 mm Width: 2,060 mm Height: 2,050 mm Weight: 16,750 kg 4 rolls PLC Fully hydraulic drive of the top and bottom roll (from 30 mm bending capacity for all four rolls) via planetary gear Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Cone bending device Hydraulic drop-end bearing Mobile control console Overload protection Operating manual in GERMAN and ENGLISH Equipment compliant with CE regulations OPTIONS: Upper and lateral sheet supports NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length must not exceed 30% or must be more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €70,300 Leasing rate: €1,328.67 Bending length: 3,100 mm Max. bending capacity – steel: 8 mm Max. sheet thickness without pre-bending at D=5x top roll: 8 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 6 mm Max. sheet thickness with pre-bending at D=5x top roll: 6 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 5 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Side roll diameter: 190 mm Working height: 825 mm Motor power: 11 kW Length: 4,880 mm Width: 1,160 mm Height: 1,200 mm Iijdpfx Aboypbqnsvjb Weight: 6,450 kg Features: - 4 rolls - PLC - Fully hydraulic drive for top and bottom rollers (for all four rollers from 30 mm bending capacity) via planetary gearbox - Hydraulic adjustment of side rolls with electronic synchronization - Hydraulic adjustment of bottom roll with mechanical synchronization - Adjustable clamping pressure - Variable rolling speed - Hardened rolls - Cone bending device - Hydraulic drop-end - Mobile control console - Overload protection - Operating manual in GERMAN and ENGLISH - Equipment in accordance with CE regulations OPTIONS: - Upper and side sheet supports - NC control IMPORTANT NOTES ON CONE ROLLING: - Max. sheet thickness is 50% of nominal capacity - Cone length must be max. 30% or more than 60% of roll length - Hardened rolls recommended

Būklė: naujas, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €95,000 Lease rate: €1,795.50 Bending length: 3,100 mm Max. bending capacity (mild steel): 13 mm Max. sheet thickness without prebending (mild steel): 12 mm Max. sheet thickness with prebending (mild steel): 8 mm Max. sheet thickness without prebending at D=5x top roll: 13 mm Max. sheet thickness without prebending at D=1.5x top roll: 10 mm Max. sheet thickness with prebending at D=5x top roll: 10 mm Max. sheet thickness with prebending at D=1.5x top roll: 8 mm Top roll diameter: 270 mm Bottom roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 5,310 mm Width: 1,660 mm Height: 1,590 mm Weight: 10,050 kg 4 rolls PLC Fully hydraulic drive for top and bottom roll (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Device for conical bending Hydraulic drop-end bearing Mobile control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment in compliance with CE regulations Iiedpfxjypbqhj Abvjb OPTIONS: Upper and side sheet supports NC control IMPORTANT POINTS FOR CONICAL BENDING: Maximum sheet thickness is 50% of nominal capacity Cone length must be max. 30% or more than 60% of roll length Hardened rolls are recommended

Būklė: naujas, Condition: New Delivery time approx. 12 - 14 weeks from order Country of origin: Turkey Price: €62,600 Leasing rate: €1,183.14 Bending length: 2050 mm Max. bending capacity (mild steel): 13 mm Max. sheet thickness with pre-bending (mild steel): 10 mm Max. sheet thickness without pre-bending at D = 5x top roll: 13 mm Max. sheet thickness without pre-bending at D = 1.5x top roll: 10 mm Max. sheet thickness with pre-bending at D = 5x top roll: 10 mm Max. sheet thickness with pre-bending at D = 1.5x top roll: 8 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Side roll diameter: 190 mm Working height: 820 mm Motor power: 11 kW Length: 3830 mm Width: 1160 mm Height: 1200 mm Weight: 5000 kg 4 rolls PLC Fully hydraulic drive of top and bottom rolls (from 30 mm bending capacity on all four rolls) via planetary gears Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop end Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Configuration according to CE regulations OPTIONS: Upper and lateral sheet supports NC control system Iodpfx Ajypbqbobvjib IMPORTANT POINTS FOR CONE BENDING: The maximum sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 2 weeks from order confirmation Country of origin: Italy Bending length: 2000 mm Max. bending capacity - mild steel: 11 mm Max. sheet thickness without pre-bending at D=5x top roll: 11 mm Max. sheet thickness without pre-bending at D=1.3x top roll: 7 mm Max. sheet thickness with pre-bending at D=5x top roll: 8 mm Max. sheet thickness with pre-bending at D=1.3x top roll: 6.4 mm Top roll diameter: 225 mm Lower roll diameter: 215 mm Side roll diameter: 165 mm Rolling speed: 8 m/min Length: 3950 mm Width: 1200 mm Height: 1200 mm Weight: 4450 kg Hardened and polished rolls Numerical control: Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclined lower roll Oil cooler Simultaneous rotation and rolling movement Simultaneous rolling and support movement Ability to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning via PLC for higher precision Infinitely variable roll movement speed Infinitely variable rotation speed Prepared for retrofit of supports (up to 5 axes) Prepared for retrofit of loading/unloading stations Prepared for retrofit of CNC controls Extra-large, double-hinged drop-end bearing Iisdsypbp Rspfx Abveb Electronic parallelism system for roll synchronization Hydraulic upper roll lifting (for models with top roll diameter from 205 mm) Double linear guidance for movement of lower rolls Ultra-wide roll blocks "MCS" bearing system for the lower rolls (4 large bearings on each shaft) Centralized lubrication system Pressure gauge for constant pinch roll monitoring Extra torque and special braking system Safety pull cord with emergency stop Equipped according to CE regulations OPTION: CNC control Siemens PSG-Absolute with 15" touchscreen (automatic sequence calculation for simple and complex shapes)

Būklė: naujas, Condition: new Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €83,800 Leasing rate: €1,583.82 Bending length: 2550 mm Max. bending capacity – mild steel: 15 mm Iijdpfx Abjypbp Djvjb Max. sheet thickness without pre-bending at D=5x upper roll: 15 mm Max. sheet thickness without pre-bending at D=3x upper roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x upper roll: 12 mm Max. sheet thickness with pre-bending at D=5x upper rolls: 12 mm Max. sheet thickness with pre-bending at D=1.5x upper roll: 10 mm Upper roll diameter: 270 mm Lower roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1155 mm Motor power: 15 kW Length: 4760 mm Width: 1660 mm Height: 1155 mm Weight: 8,950 kg 4 rolls PLC Fully hydraulic drive of upper and lower rolls (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic lower roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end bearing Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment according to CE regulations OPTIONS: Top and side sheet supports NC control IMPORTANT POINTS WHEN CONE ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Būklė: geras (naudotas), Gamybos metai: 1972, Ratų skersmuo – maks. 80 mm Ratų plotis 60 mm Modulis – maks. 3 Modulis – min. 0,1 Bendras galios poreikis 0,4 kW Mašinos svoris apie 120 kg Reikalinga erdvė apie 0,6x0,6x0,75 m Iiedpfx Aow N S D Sjbveb Mašina skirta nedidelių kūginių / tiesių krumpliaračių šlifavimui. Kūginių krumpliaračių frezavimui naudojama Mikron 102.01.

Būklė: naudotas, Gamybos metai: 2002, Wheel diameter - max. 275 mm Module - max. 6 Module - min. 1.5 Control system: SINUMERIK 840 C Gear width: 5.5 mm Helix angle min. 0° / max. 60° Number of teeth - max. 120 Number of teeth - min. 5 Gear ratio max. 1:10 Gear ratio min. 1:1 Workpiece spindle speed max. 110 rpm Cutter head speeds: 20 - 110 rpm Total connected load: 100 kW Machine weight approx. 16.7 t Space requirement approx. 5.20 x 2.30 x 2.40 m Integrated deburring unit, U-axis / Q-spindle Ijdpfxovxwnwo Abvjib Chip conveyor Coolant system Electrostatic air cleaner: ELBARON No tools included No workpiece clamping device

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Parduodamas Oerlikon kūginis/varžtinis reduktorius E 37 EX 2 serijos, serijos numeris 828499L01.1. Įrenginys išimtas iš veikiančios įrangos ir tinka bandymo stendams, specialiems įrengimams bei pramoninėms pavaroms. Techniniai pagrindiniai duomenys (bendri): Gamintojas: Oerlikon Tipas: E 37 EX 2 Konstrukcija: kūginis/varžtinis reduktorius Iiodpsypb Iyefx Abveb Pritaikymas: bandymų stendai, mašinų gamyba, pramoninės pavaros Būklė: naudotas, veikiantis

Būklė: naudotas, Gamybos metai: 2003, Maximum wheel diameter: 275 mm Wheel width: 58 mm Module - max.: 13 Module - min.: 2 Control: SINUMERIK 840 D Number of teeth min./max.: 5 - 200 Maximum transmission ratio: 10:1 Maximum cutter diameter: 228 mm X-axis: 25 - 350 mm Y-axis: +/- 175 mm Iodpfx Aox R U E Nsbvjib Z-axis: 125 - 600 mm B-axis: -5 / +90° Total power requirement: 75 kW Machine weight approx.: 11.7 t Space requirement approx.: 12.5 x 3.0 x 3.0 m Equipped for dry milling Deburring press Deburring unit with powered brush Integrated magnetic chip conveyor Promot Cellmaster Cartridge pulse filter system

Būklė: naudotas, Gamybos metai: 2001, Ratų skersmuo – maks. 400/500 mm CNC valdymas GE FANUC Series 160i-M Dantračio skersmuo – maks. 400 mm Kūginio dantračio (krumpliaračio) skersmuo – maks. 500 mm x ašis +/- 70 mm y ašis 200 mm z ašis 200 mm ašies kampas 90 laipsnių Sukimosi greičio diapazonas: R T min Vardinė srovė 30 kVA Staklių svoris apie 6,2 t Reikalinga vieta apie 3,2 x 2,5 x 2,3 m Iiodpfx Abeyv Iplevob Oerlikon T50 yra 3 ašių CNC tikrinimo staklės, skirtos visiškai automatiniam spiralinių ir hipoidinių kūginių pavarų patikrinimui (kietumo ir minkštumo) su 90° ašies kampu Kūginių pavarų analizė: ROTEC T50 GA2 Spalvų blokas: Binks įmonės

Būklė: naudotas, mašinos/transporto priemonės numeris: 294203, Eckenrundstoßmaschine - Corner Rounding Machine Kolbus EH, Serial No. 294203 Rundes Messer Nr. 11 / Round Knife No. 11 Max. stack height: 55 mm Stroke: 65 mm Iiedpjh Axdtjfx Abveb Hand lever / Table model Manual operation Online video inspection via Skype We would be very pleased to welcome your visit – more machines in stock. Available immediately – Can be inspected. In stock in Emskirchen / Nuremberg – Test run possible.