Unotech Gmbh Upaxx 70 pirkti naudotą (74 499)

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2019, veikimo valandos: 3 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 70 t, bendras svoris: 9 500 kg, pildymo angos plotis: 420 mm, pildymo angos ilgis: 1 250 mm, Technical data for baler / can press / sheet metal press: Manufacturer: unoTech GmbH Model: UPAXX 70 Year of manufacture: 2019 Operating hours: approx. 3,000 hours Pressing force: 700 kN at 315 bar Filling opening (hopper): 420 x 1,250 mm (D x W) Channel cross-section (bale size): 350 x 500 mm (H x W), length depending on material Drive power: 30 kW Connected load: 40 kW Total current consumption: 70 A Throughput with empty beverage cans: - One press stroke: approx. 1.7 t/h Bwsdpeu Th S Sefx Af Aol - Two press strokes: approx. 2.5 t/h Achieved compaction: approx. 1,200 kg/m³ Hydraulic oil tank capacity: 850 L Press dimensions assembled: 8,000 x 1,600 x 2,500 mm (L x W x H) Transport weight (press): approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant S355 steel Material suitability: According to the manufacturer, this machine is suitable for pressing tin cans, sheet metal offcuts, steel sheet, as well as aluminum, brass, and copper waste. Condition of the baler: The baler has been completely overhauled in our workshop. The press is in very good condition (see the function video after overhaul) and will be sold with 12 months OBM parts warranty. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic circuit diagram). An inspection can be arranged by appointment. We accept no liability for the technical information provided or for possible errors.

Gamybos metai: 2004, veikimo valandos: 34 304 h, būklė: labai geros būklės (naudotas), Weiss Climate Test Chamber -70 to +180 °C Manufacturer: Weiss Umwelttechnik GmbH Model: Climate Chamber WK-1000/70 Test Chamber Volume: 990 litres Temperature Range: -70 to +180 °C Humidity: 10 to 98 % Mains Voltage: 400 V 3/N 50 Hz Rated Current: 29 A Rated Power: 13.8 kW Refrigerant: R 404A Controller Microprocessor-controlled regulation and monitoring system SIMCON/32 • 32-bit technology • Graphical display of setpoint and actual value • Digital indication of setpoint and actual values for temperature and % relative humidity • Digital entry for temperature in °C and humidity in % relative humidity • Integrated program editor • Program memory • Manual and automatic operation modes • Fault diagnosis system Operating hours: 34,303.8 h Year of manufacture: 2004 Test Chamber Dimensions: Height: 950 mm Width: 1,100 mm Depth: 950 mm Overall Dimensions: Bwsdpsph U Aysfx Af Ael Width: 1,400 mm Depth: 1,900 mm Height: 1,970 mm Financing through our partner bank is available. komplett-konzept.leasingo.de You will find more items – new and used – in our shop! International shipping costs on request!

Būklė: geras (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 4 t, pildymo angos plotis: 730 mm, pildymo angos ilgis: 400 mm, kamuolio ilgis: 700 mm, ryšulio plotis: 350 mm, ryšulio aukštis: 500 mm, balo svoris: 40 kg, bendras plotis: 988 mm, bendras aukštis: 2 033 mm, bendras ilgis: 752 mm, įvesties srovės tipas: Oro kondicionierius, įėjimo įtampa: 230 V, bendras svoris: 380 kg, triukšmo lygis: 60 dB, galia: 1,5 kW (2,04 AG), įėjimo dažnis: 50 Hz, Pilnai veikianti ir patikrinta vertikali presavimo mašina, skirta mažiems kartono arba plastiko kiekiams presuoti. Daugiau informacijos ar nuotraukų galite gauti el. paštu arba telefonu. Bodpfxovy Drxj Af Aswl

Būklė: naujas, Gamybos metai: 2025, THE ECONOMICAL MANDREL BENDING MACHINE FOR TIGHT BENDING RADII For tube dimensions from 20 - 90 mm, this bending system provides solutions for complex geometries with standard radii of 2xD. Depending on material quality and wall thickness ratio, radii of 1.5xD are also feasible for series production. With a tool height of 120 mm, there is ample room for special profiles. The highly precise and powerful electric drive of the bending axis, as well as the robust and rigid design of the mandrel carrier and bending arm, contribute to the desired bending result. The plug-in bending tools allow for quick changeover to other tube dimensions. The clamping pressure for tube fixation can be optimally adjusted. The PLC control system (expandable via USB stick) with data storage and the latest X2X interface can store an almost unlimited number of programs for bending angles, lengths, and rotation angles for up to 50 bending sequences per tube length. For monitoring the springback values, a freely programmable database for up to 200 materials is available. The control system offers two operating modes: In 'Simple Bending', the system automatically displays the length and rotation of the bows relative to each other. In 'Controlled Bending' mode, the data is pre-set, and a continuous target/actual comparison is performed during the bending process. Also available with pneumatic stop or with gear-assisted length and rotation positioning. APPLICATION AREAS: • Plant construction, e.g., chemical industry • Hydraulic piping • Metal construction • Prototyping • Pipeline construction TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mm Bending capacity 9000: Ø 20 to 90 x 5 mm depending on material • Bending radius min/max: 40 mm/250 mm • Minimum bending radius: 1.5 x Ø (standard 2 x Ø ) • Multifunction machine control for bending angle adjustment (0.1°) • Mandrel carrier lengths: 3000/4500/6000 mm • Maximum 180º bending angle • Weight: 1600-3200 kg (depending on model) • Ergonomic operation via safety foot switch OPTIONAL EQUIPMENT: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-release chuck • Larger bending radius up to 300 mm • Positioning of length and rotation via automatic brake function or manual stops with foot switch • Semi-automatic positioning of length and rotation via servomotors • Automatic tool retraction Bwjdpfx Ajnh R Sujf Ajl • Tube calculation software • 10-inch touchscreen with integrated tube calculation • Data transfer via cable (LAN), wireless (WiFi), or USB OUR SERVICE: • Welcome to test production at our facility in the demonstration room • Consultation and information meeting at your site • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Būklė: naudotas, Išilginio pjovimo diskinis pjūklas Išilginio pjovimo diskinis pjūklas Skersinis pjūklas / išilginio pjovimo diskinis pjūklas, pagaminta 1999 m. Dirba iš apačios Ilgiams iki 4,7 m Medžiagos storis iki 110 mm Tinka naudoti kaip sekantis pjūklas už gamybinės linijos Bwedoq E Ivtopfx Af Ael INFO!! Už naują Flender 10 kW plokščiąjį diskinio pjūklo variklį reikia mokėti 4700 EUR, tai daugiau nei visa mašina pas įmonę Jöma.

Būklė: naudotas, Gamybos metai: 2008, Funkcionalumas: ribota funkcionalumas, mašinos/transporto priemonės numeris: 6034, X ašies eiga: 7 200 mm, Y ašies eiga: 450 mm, Z ašies eigos atstumas: 590 mm, greitas poslinkis X ašimi: 50 m/min, greitas poslinkis Y ašis: 25 m/min, greitasis eiga Z ašyje: 25 m/min, nominali (akivaizdi) galia: 45 kVA, valdiklių gamintojas: HEIDENHAIN, valdiklio modelis: Bahnsteuerung iTNC 530, bendras aukštis: 2 900 mm, bendras ilgis: 12 500 mm, bendras plotis: 4 810 mm, bendras svoris: 14 000 kg, veleno greitis (min.): 100 aps./min, veleno greitis (maks.): 12 000 aps./min, darbinis slėgis: 7 juosta, The BZ 7000 is designed exclusively for milling, drilling, countersinking, reaming, and thread cutting of metals, aluminum, plastics, and wood (chipboard and solid wood). URBAN CNC Machining Center BZ 7000 • Year of manufacture: 04/2008 • Control: HEIDENHAIN Path Control iTNC 530 • 4 axes • Travel X / Y / Z axis: 7200 / 450 / 590 mm • Working area X / Y / Z axis: 7000 / 400 / 350 mm • Weight: 14 t Equipment · Robust base structure in welded steel frame design · Linear ball bearing guideways on all axes · Milling spindle unit: 100 – 12,000 rpm, spindle taper SK 40 Drives: · X-axis (50 m/min) via rack-and-pinion drive · Y-/Z-axis (25 m/min) via ball screw drive · B-axis: 9000°/min · Swiveling control panel · Automatic central lubrication · Travelling tool changer for 12 SK 40 tool holders · Coolant emulsion system · Machine lamp · Safety fence · Electronic handwheel integrated in the control panel · Chip drawers · Laser scanner Bjdpfx Aoyzxfnof Aswl · Minimum quantity lubrication Technical Data · Compressed air connection: R 3/8" / 6 bar · Device connection: R 1/4" · Operating pressure: approx. 6 bar · Air consumption per cycle: approx. 600 l/min at 6 bar · Electrical connection: 3 x 400 V +/- 5% / 50 – 60 Hz · Control voltage: 24 V DC · Rapid traverse: X-Y-Z 50 – 25 – 25 m/min · Feed rate, stepless: 0 – 5000 mm/min · Tool change: disk-type changer with 12 tools, SK 40 · Spindle taper: SK 40 · Tool clamping: hydraulic · Coolant unit: emulsion, 300 l · Spindle speed: 100 – 12,000 rpm · Speed adjustment: 80 – 120% · Drilling capacity in St 60 / Alu: up to 28 mm Ø · Thread cutting capacity in St 60 / Alu: up to M24 · Measuring system: rotary encoder/length measuring system · Positioning accuracy: 0.025 mm · Repeatability: 0.015 mm · Control: HEIDENHAIN iTNC 530 M, 4 controlled axes · Data interface: V 24/RS - 232 - C · Travel X / Y / Z axis: 7200 / 450 / 590 mm · Working area X / Y / Z axis: 7000 / 400 / 350 mm · Space requirement incl. safety fence: approx. 60 m² (12.5 x 4.8 m) · Machine weight incl. accessories: approx. 14 t · Sound emission: average sound pressure level 79 dB(A)

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Klöckner Ionon GmbH yra įmonė, besispecializuojanti plazminio nitridavimo ir dangų technologijose. Modelio žymuo S800/7000 nurodo konkretų plazminio nitridavimo įrenginį (vakuuminę krosnį), naudojamą plieninių komponentų paviršiaus kietinimui. Plasmanitriding Technology Dr. Böhm GmbH +2. Štai tipinės techninės savybės ir pritaikymo sritys tokiems įrenginiams: Techninės savybės (S serija): Procesas: plazminis nitridavimas, plazminis nitrokarburizavimas (dėvėjimosi ir korozijos atsparumui didinti). Sistemos tipas: vertikalus arba horizontalus reaktorius (vakuumo krosnis). Matmenys (S800): žymuo „800“ paprastai reiškia naudingąją kameros diametrą (apie 800 mm), o „7000“ gali žymėti sistemos seriją arba specifinį aukštį/tūrį. Funkcijos: tikslus junginio sluoksnio valdymas, tinkamas kaip PVD priešapdirbimas. Bjdpfx Afeytl Hhe Aswl

Būklė: geras (naudotas), Gamybos metai: 2003, Filtration is carried out by an internal filter unit - Manufacturer: Atlantik GmbH - Model: 30.701.31.15100 - Operating pressure: 10 bar Bwedpsiw Eafsfx Af Aol - Filtered particle size: 6.0 µm (microns) - Dimensions: 1050 x 1150 x 1620 mm - Capacity: 425 l - Electrical data: 250 V, 5 A, 50/60 Hz - Year of manufacture: 2003

Gamybos metai: 2012, būklė: reikia remonto (naudotas), Funkcionalumas: ribota funkcionalumas, pilnai automatizuotas bandymų stendas kuro elementų komponentų testavimui Bodpfxsytr R He Af Ajwl maks. galia 500 W (maks. srovė: 100A, maks. įtampa: 35V) dujos gali būti termiškai valdomos, drėkinamos ir slėgiu paduodamos, yra azoto prapūtimas anodas: 0,04–2 Nl/min vandenilio, katodas: 0,1–5 Nl/min oro arba 0,02–1 Nl/min deguonies Įskaitant maitinimo kabelį, gamintojo Testwork® programinę įrangą, matavimo kompiuterį Centrinis valdymo blokas (PLC) sugedęs

Būklė: naudotas, Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, Parduodami 2 Farrag firmos suslėgto oro džiovintuvai; daugiau techninės informacijos pateikiama užklausus. Bjdjvkdkispfx Af Ajwl Naujo kaina apie 6.500 € Tipas 1: SCARD 100 Tipas 2: SCARD 70 Metai: 2005 Galia: 3,1 kW

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, virvės ilgis: 30 000 mm, virvės greitis: 47 000 mm/min, mašinos/transporto priemonės numeris: HAW1700-EV-Funk, Hydraulic winch for log splitters, cranes, mini excavators, tractors, vineyard equipment, horticulture, and many other applications. The hydraulic attachment winch makes numerous tasks easier: - Pull firewood to the log splitter and set it up - Load logs onto trailers - Extract roots and trees - Attach as an auxiliary winch to forestry cranes and small excavators - Use as a winch for small tractors and narrow-track tractors Rugged steel construction with three-sided mounting capability (left, right, rear) featuring 12 threaded holes, providing extensive options for securing the winch (threads are pre-cut and painted; re-tapping is required prior to use to remove rust protection). Equipped with a 20 m long, 6 mm thick steel cable. Large cable drum for extended cable life. We install hydraulic motors from 50 to 630 ccm (standard = 400 ccm), allowing you to select the desired speed and pulling power. Maximum operating pressure: 225 bar peak Continuous operating pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Continuous torque: 380 Nm Maximum pulling force: 1700 kg Weight: 49 kg Cable speed: 47 m/min with 60 L/min hydraulic oil flow Color: red Dimensions: Length: 500 mm Length with pendulum: 570 mm Front width: 120 mm Rear width: 180 mm Bearing width: +30 mm Motor width: +200 mm Height: 250 mm Bsdpfxjdf Ufps Af Aswl The winch is available for bolting or welding installation. This version includes an electric hydraulic valve, radio remote control, and hydraulic hoses to the motor. Article number: HAW1700-EV-Funk

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Technical Data: Operating voltage: 400V AC Pre-fusing: 50A Frequency: 50Hz Electrical connected load: 19.1 kW Control voltage: 24V DC Air pressure: 6 bar Production capacity: 20 x 2m modules/hour Bwodpfxexzug Se Af Aol Level of automation: fully automatic Footprint: 12.5 x 5.2 x 4m (Width x Height x Depth) Stations: Decoiler: This station holds the coil and unwinds the product part. Manufacturer: Robust Habicht & Heuser GmbH & Co. KG Model: URM-1400 Cosmetic Tape Applicator: Applies cosmetic tape to the rear module edge of the product part using an applicator. Manufacturer: Printum Laser Cell: Creates contact openings by laser at the rear module edge on the product part, and checks the correct opening of the contacts using pneumatic Ignun contact probes. Manufacturer: ACSYS Lasertechnik GmbH CO₂ Laser INLINER II 40W CO2 Inspection Station: Empty cell for conducting tests on sample materials. Transfer Tape Applicator Cell: Applies transfer tape to the rear module edge of the product part using an applicator. Contact Tape Applicator Cell: Inserts preforms (solder pads) into the opened contact openings, then applies contact tape to the rear module edge of the product part using an applicator. Soldering Station: Creates the electrical contacts by soldering the preforms (solder pads) to the contact tape. Manufacturer: ATN Automatisierungstechnik Niemeier GmbH Flasher Station: Tests the functionality of the product part via flashing while simultaneously contacting with pneumatic Ignun contact probes. Manufacturer: WAVELABS Solar Metrology Systems GmbH Model: WLAAA0039 Designation: Module flasher Empty Cell: No processing is currently performed on the product part. Recoiler: This station holds the coil and rewinds the product part. Manufacturer: Robust Habicht & Heuser GmbH & Co. KG Model: URM-1400

Būklė: naujas, Gamybos metai: 2026, Machine designation: Gantry Nailing Machine for the Pallet & Packaging Industry Manufacturer: Stoiber GmbH Model: StoNail 7000 Year of manufacture: 2026 Condition: New Price & Location: Price on request 4122 Arnreit Description: • Suitable for the production of various types of pallets and crate components • Angled machine frame with wooden panel for templates • Divided into two working stations, the operator alternately works on the left or right of the machine • The nailing gantry is equipped with up to 6 individually controlled nailing tools for jumbo coil nails (approx. 6,000 nails) • Machine operation and programming of new pallet types is performed via a touch display • Existing programs can be retrieved from memory at any time Bwedpfx Aerallnsf Aol • Products are visualized on the touch display using the entered parameters. No manual teaching required for nailing points! • NEW – Robot for pallet stacking! Technical Data: • Maximum standard pallet size: 3000 x 1700 mm per side • Maximum optional pallet size: 4000 x 2000 mm per side • Maximum nail length: 130 mm • Jumbo coil: approx. 1,000 nails/coil • Production capacity: 400 – 600 pallets/8 hours • Operators required: 1 – 2 persons • Low operating and maintenance costs

Būklė: naujas, Gamybos metai: 2026, Machine Designation: Portal Nailing Machine for the Pallet & Packaging Industry Manufacturer: Stoiber GmbH Model: StoNail 7000 RT Year of Manufacture: 2026 Condition: New Price & Location: Price on request 4122 Arnreit Description: • Semi-automatic portal nailing machine with rotary turntable (R) and pallet stacking robot, designed for the production and stacking of various types of pallets and box components. • The machine features an integrated rotary turntable with two work areas for loading loose blocks and boards. In combination with the pallet stacking robot, this ensures an optimal material flow. • The nailing bridge is equipped with up to 6 individually controlled nailing units with jumbo coil nails (approx. 6,000 nails), offering maximum flexibility in the nailing process of your products. • Machine operation and programming of new pallet types are performed via a touch display. Existing programs can be recalled from memory at any time. The entered parameters are visualized on the touch display, eliminating manual teaching of nailing points. • NEW – Robot for pallet stacking Technical Data: • Max. pallet size: 3,000 x 1,700 mm per side • Max. nail length: 130 mm • Jumbo coil: approx. 1,000 nails/coil • Production capacity: 400 – 600 pallets/8 h • Machine operators: 1 – 2 persons • Low operating and maintenance costs Bodperallrefx Af Aswl

Būklė: geras (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, konteinerio ilgis: 12 pėda, Due to a change in the heat management system at our biogas plant, we are selling this fully operational dryer. It can be inspected while in operation. Bodpfsvg Nwajx Af Aswl Disassembly, transport, and reinstallation available upon request.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2011, veikimo valandos: 180 h, Funkcionalumas: visiškai funkcionalus, Smulkintuvas/drožlių trupintuvas su viena ašimi Skylėtas sietas drožlių ilgiui nustatyti Kompaktiška ir sustiprinta konstrukcija visų rūšių drožlėms, taip pat drožlėms su stambiais gabalais Pagrindiniai matmenys: ilgis 3200 mm x plotis 2800 mm x aukštis 3035 mm Įkrovimo bunkerio dydis: 1500 mm x 1500 mm Užpildymo anga: 700 mm x 7400 mm Bjdpoxy Idhsfx Af Aswl Variklio galia apie 37 kW Svoris: 6000 kg Smulkinimo rotoriaus skersmuo: 290 mm Našumas per valandą apie 1,5 - 2,5 t/h, priklausomai nuo medžiagos Valdymas S7 300 su visais komponentais ir kabeliais Vieta: Austrija Galima iš karto

Gamybos metai: 2025, būklė: naujas, Funkcionalumas: visiškai funkcionalus, Aliumininė dėžės antstatė Iveco 70 C su 3 ritininiais užraktais, 3000 litrų talpos nerūdijančio plieno vandens baku su 2 valymo liukais. Dėžė ir bakas yra visiškai sumontuoti ant rėmo Iveco Allrad 70C automobiliui. Bwedpfx Afexlkpke Aol

Būklė: geras (naudotas), Fully Automatic MOSCA Strapping Machine RO-TR 700-2 Manufacturer: Gerd Mosca GmbH Model: RO-TR700-2 PLC control Operator panel for setting operating modes, strapping intervals, and strap tension Bwedpfx Afstzbhcs Ajl Suitable for use with PP straps, width 5, 6, 7, 8, 9, or 12 mm Operating voltage: 400 V 3-phase AC Current consumption: 3 A Power: 2.1 kW Frequency: 50 Hz Castors: four swivel castors, two with brakes Overall dimensions: approx. 1350 x 1200 x 1650 mm (W x D x H) You will find more items in other sizes—new and used—in our shop! International shipping costs upon request!

Būklė: labai geros būklės (naudotas), Katalogo numeris 7732 TECHNINIAI DUOMENYS - spaudimo jėga: hidraulinė - briketų forma: apvali - briketo skersmuo: 70 mm - bunkerio skersmuo: 1200 mm - našumas: apie 70 kg/h - automatinis mašinos veikimas - variklis: 7,5 kW - maks. darbinis slėgis: 150 bar Bwsdpfx Afsyfhiie Ajl - atsiurbimo jungtis: 90 mm - filtro maišo angos skersmuo: 500 mm - maks. maišo aukštis: 900 mm - matmenys (ilgis/plotis/aukštis): 1950x1400x2700 mm - svoris: 1130 kg PRIVALUMAI – itališka gamyba – galima tiesiogiai prijungti prie pjuvenų ištraukimo sistemos – naudota briketavimo mašina – DTR dokumentacija – labai gera būklė Grynoji kaina: 29 900 PLN Grynoji kaina: 7 120 EUR pagal 4,2 EUR kursą (Kainos gali keistis esant didesniems svyravimams)

Būklė: labai geros būklės (naudotas), KATALOGO NR. 7567 TECHNINIAI DUOMENYS - Automatinis lentjuosčių padavimas Bodpfoyg Iydex Af Aewl - 2 pneumatinių spaustuvai - Agregato kampo reguliavimas - Pneumatinis velenų judėjimas - Vienu metu apdorojamos 2 sekcijos - Griovelių gylis iki 25mm - Lentjuosčių atramos - Grąžtų osciliacinio judesio reguliavimas - Pavaros eigos reguliavimas - Automatinis sustabdymas - Pakreipimas nuo 90 laipsnių (vertikaliai) iki 0 laipsnių (horizontaliai) - Pagrindinis variklis 1,1kW - Osciliacijos variklis 0,75kW - Darbinis slėgis 6-8 bar - Matmenys ilgio/pločio/aukščio 4020x1150x1400 mm - Svoris apie 480 kg PRIVALUMAI – langų gamybai – osciliacija – pneumatiniai spaustuvai – nedažyta – itališka gamyba – naudota, labai gera būklė Grynoji kaina: 13 900 PLN Grynoji kaina: 3 300 EUR pagal 4,2 EUR kursą (Kainos gali keistis dėl valiutų svyravimų)

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, WE Flexmaster 400 laser welding machine Year of manufacture: 2010 Laser unit: TruDisk 3302 by Trumpf Bjdpov Ipcfjfx Af Aswl Chiller: P805-17640 by Termotek Materials: mild steel sheet and stainless steel sheet Sheet thickness: 0.6 – 2.0 mm Tube diameter: 80 – 600 mm Tube length: 100 – 1250 mm

Būklė: naudotas, Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, veikimo valandos: 6 650 h, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, X ašies eiga: 4 600 mm, Y ašies eiga: 1 550 mm, Z ašies eigos atstumas: 400 mm, ruošinio aukštis (maks.): 290 mm, ruošinio svoris (maks.): 500 kg, įrankių magazino lizdų skaičius: 15, valdiklių gamintojas: Bosh Rexroth, bendras svoris: 5 500 kg, stalo ilgis: 4 000 mm, stalo plotis: 1 300 mm, ašies variklio galia: 10 000 W, nominali (akivaizdi) galia: 25 kVA, ašies skaičius: 1, greitasis eiga Z ašyje: 20 m/min, greitas poslinkis X ašimi: 60 m/min, greitas poslinkis Y ašis: 60 m/min, sukimosi greitis (maks.): 24 000 aps./min, sukimosi greitis (min.): 1 200 aps./min, veleno nosis: HSK63F, veleno greitis (min.): 1 200 aps./min, įrankio ilgis: 240 mm, įrankio svoris: 6 000 g, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, ArtisX6 – SHORT DESCRIPTION 1 spindle motor with 10 kW power; constant power range from 12,000 to 24,000 rpm; operating range: 1,200–24,000 rpm. Tool holder: HSK63F. Axis travel ranges: X = 4,600 mm, Y = 1,550 mm, Z = 400 mm, B-axis = 180°, C-axis = 360° Axis rapid traverse speeds: X/Y plane = 85 m/min; Z = 20 m/min Clearance beneath gantry: 290 mm 1 automatic carousel tool magazine, 15 positions. Max. tool length: 240 mm, max. tool weight: 6 kg Drilling aggregate in L layout, 2.2 kW power, spindle speed 4,500 rpm, spacing 32 mm Machine table: wooden (high-quality waterproof plywood). Dimensions: 4,000 x 1,300 mm. 2 x 4 pneumatically retractable location stops (Ø 25 mm, stroke 115 mm). Tool set: yes (including some never used) Table divided into two stations for alternating operation 1 vacuum pump with a capacity of 250 m³/h and a buffer tank of 500 liters Machine safeguards (EU standard): BUMPER collision system (no mats, light barriers, etc. required) Control system: Bosch Rexroth PNC, industrial PC BTV 16, Pentium III processor, 256 MB RAM, 10 GB HDD, network card Profibus SERCOS drive control system Data input: USB stick, local network Operating system: Windows 2000. ProEmbSys Bwjdpfx Afswh Aido Ael Touchscreen display CAD/CAM software: Alpha/CAM Mobile control console with handheld control panel Remote diagnostics Interpolation: 5-axis linear, 2½D circular Connected load: approx. 25 kVA Central lubrication Weight: 5.5 t Machine in very good condition, 100% operational. Storage location: Northern Poland.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 120001688/50, Badeer žuvų perdirbimo mašina, skirta plokščioms žuvims – visa dokumentacija pateikta lenkų ir anglų kalbomis. Bodey Hiyaspfx Af Aswl

Būklė: naudotas, Gamybos metai: 2004, Techniniai duomenys: Įtampa: 400 V / Hz Bendras galios poreikis: 0,37 kW Mašinos svoris apie: 360 kg Mašinos matmenys (IxPxA): I:2,7 x P:0,7 x A:2,0 m Grandiklinis konvejeris kartu su aušinimo vandens sistema ir sukimo momento išjungimu Išmetimo ilgis D=280 mm Drožlių įmetimo plotis F=325 mm Įstatymo aukštis B=apie 160 mm Įstatymo aukštis B+I=220 mm Drožlių įmetimo plotis F1=300 mm Drožlių įmetimo ilgis=700 mm Atstumas iki grindų I=60 mm Išmetimo aukštis nuo grindų C+I=950 mm Įranga: 2 atraminės kojos Bwodpfxsv N Ekbj Af Asl

Būklė: paruoštas naudoti (naudotas), Drožlių transporteris, sraigtinis transporteris, dvigubas sraigtinis transporteris, naudota mašina Gamintojas: Ventilatorenfabrik Oelde GmbH Bendri matmenys: Plotis: 9460 mm Gylis: 1340 mm Aukštis: 2300 mm Lovio matmenys: 8830 × 900 × 340 mm Pajėgumo anga: 1230 × 1200 mm Išleidimo anga: 730 × 535 mm Elektriniai duomenys: 400 V Bjdpfx Aoy H I Uiof Aewl Dvigubo sraigtinio transporterio sistema.