Thorlabs Ac254-100-C pirkti naudotą (68 879)

Būklė: naudotas, Lens, lenses - Quantity: 6x lenses - Packaging: individually packed - Dimensions: 110/110/H35 mm - Price: complete set for all 6 pieces - Sold only as a complete set - Weight: 0.3 kg/piece Pedpfx Acsb Nfc Soasgp

Būklė: labai geros būklės (naudotas), For sale: Heraeus T 5042 EK dryer. Pgedju Udp Iopfx Acaop

Gamybos metai: 2020, būklė: labai geros būklės (naudotas), ESPEC PL-4J Klimos bandymo kamera / Temperatūros bandymo kamera Gamintojas: ESPEC Corp. Tipas: PL-4J Įrangos tipas: Klimos bandymo kamera / Temperatūros bandymo kamera Pagaminimo metai: 2020 Parduodama naudota temperatūros ir klimos bandymo kamera, gamintojo ESPEC. Ši įranga tinka temperatūros ir klimos bandymams, aplinkos modeliavimui, medžiagų bandymams, kokybės kontrolės tikslams, taip pat kūrimo ir apkrovos bandymams. Techniniai duomenys Gamintojas: ESPEC Corp. Podpfx Acszntxmsaegp Tipas: PL-4J Temperatūros diapazonas: -40 °C iki +100 °C Drėgmės diapazonas: 10–98 % santykinės drėgmės Bandymo kameros tūris: apie 800 litrų Šildymo greitis: apie 3 K/min. Aušinimo greitis: apie 2 K/min. Vidiniai matmenys (plotis × aukštis × gylis): apie 1000 × 1000 × 800 mm Išoriniai matmenys (plotis × aukštis × gylis): apie 1410 × 1970 × 1273 mm Maitinimo įtampa: AC 400 V / 3~ / 50 Hz Maksimali srovės sąnauda: 21 A Svoris: apie 610 kg Šaltnešis: R452A Šaltnešio kiekis: 1,16 kg + 0,36 kg Įranga Lietimui jautrus ekranas Temperatūros ir drėgmės valdymas Programinis valdymas Vidinė dalis iš nerūdijančio plieno Apmatymo langas Vidinis apšvietimas 100 mm kabelio įvadas Vandeniu aušinamas kondensatorius Ratukai, skirti lengvam transportavimui Naudojimo sritys Temperatūros bandymas Klimos bandymas Aplinkos modeliavimas Medžiagų bandymas Kokybės kontrolė Elektronikos bandymas Moksliniai tyrimai ir plėtra Ilgalaikiai ir senėjimo bandymai Dirbtuvių bandymas Klimos kamera buvo patikrinta dirbtuvėse. Atliktas funkcionalumo testas. Drėgmės sistema buvo aptarnauta. Sėkmingai atliktas dokumentuotas bandymas. Komplektacija ESPEC PL-4J klimos bandymo kamera Priedai, kaip parodyta nuotraukose Būklė Naudota Vizualinė būklė, kaip parodyta nuotraukose. Yra įprastų naudojimo pėdsakų, atsiradusių dėl amžiaus ir naudojimo. Pastaba Atsiėmimas arba pristatymas kurjeriu galimas po susitarimo. Pasiliekame teisę keisti, daryti klaidų ir parduoti prekes prieš tai, nei bus atliktas mokėjimas.

Gamybos metai: 2018, būklė: labai geros būklės (naudotas), ESPEC PL-4J Klimos bandymo kamera / Temperatūros bandymo kamera Podpfx Acjzntuneaegp Gamintojas: ESPEC Corp. Modelis: PL-4J Įrenginio tipas: Klimos bandymo kamera / Temperatūros bandymo kamera Pagaminimo metai: 2018 Parduodama naudota temperatūros ir klimos bandymo kamera, gamintojo ESPEC. Įrenginys skirtas temperatūros ir klimos bandymams, aplinkos modeliavimui, medžiagų bandymams, kokybės užtikrinimui, taip pat kūrimo ir apkrovos bandymams. Techniniai duomenys Gamintojas: ESPEC Corp. Modelis: PL-4J Temperatūros diapazonas: -40 °C iki +100 °C Drėgmės diapazonas: 10–98 % santykinės drėgmės Bandymo kameros tūris: apie 800 litrų Šildymo greitis: apie 3 K/min. Aušinimo greitis: apie 2 K/min. Vidiniai matmenys (plotis × aukštis × gylis): apie 1000 × 1000 × 800 mm Išoriniai matmenys (plotis × aukštis × gylis): apie 1410 × 1970 × 1273 mm Maitinimo įtampa: kintamoji srovė 400 V / 3~ / 50 Hz Maks. srovės suvartojimas: 21 A Svoris: apie 610 kg Šaldymo skystis: R452A Šaldymo skysčio kiekis: 1,16 kg + 0,36 kg Įranga Lietimui jautrus ekranas Temperatūros ir drėgmės reguliavimas Programinis valdymas Nerūdijančio plieno vidus Peržiūros langas Vidinis apšvietimas 100 mm kabelių įvadas Vandeniu aušinamas kondensatorius Ratukai, skirti lengvai transportuoti Naudojimo sritys Temperatūros bandymai Klimos bandymai Aplinkos modeliavimas Medžiagų bandymai Kokybės užtikrinimas Elektronikos bandymai Moksliniai tyrimai ir kūrimas Ilgalaikiai ir senėjimo bandymai Dirbtuvių bandymai Klimos kamera buvo patikrinta dirbtuvėse. Atliktas funkcinis testas. Drėgmės sistema suremontuota. Sėkmingai užbaigtas dokumentuotas bandymo ciklas. Komplektacija ESPEC PL-4J klimos bandymo kamera Priedai, kaip parodyta nuotraukose Būklė Naudota Vizualinė būklė, kaip parodyta nuotraukose. Yra normalūs, naudojimui ir amžiui būdingi nusidėvėjimo požymiai. Pastaba Atsiėmimas arba siuntimas kurjeriu galima susitarti. Pasilieka teisė atlikti pakeitimus, esant klaidoms ir atsiradus galimybei parduoti kitam pirkėjui.

Būklė: naudotas, Pramoninis hidraulinis presas, hidraulinis presas, 100 tonų presas, C formos hidraulinis presas, „HYDRAP PRESSEN HPS ZB 100“, naudota įranga Gamintojas: „HYDRAP PRESSEN GmbH“ (Plüderhausenas, Vokietija) – aukščiausios klasės pramoninių presų gamintojas. Tipas: HPS ZB 100 Serijos numeris (gamyklos numeris): 6535 Pagaminimo metai: 1991 m. Svoris: 14 700 kg Būklė: naudota, tvirta pramoninė konstrukcija Techniniai ir eksploataciniai parametrai: Leistina apkrova / presavimo jėga: 1000 kN (apytiksliai 100 tonų) Naudinga eiga: 300 mm Pavara: hidraulinė Tiekimo įtampa: 380 V Dažnis: 50 Hz Srovės tipas: D (trijų fazių kintamoji srovė / delta jungtis) Variklio galia: 45 kW Nominali srovė: 90 A Alyvos klampumas: HLP 46 Alyvos talpa: 780 litrų Stabdymo atstumas: 34 mm Pgedpszk Amrefx Acaop Stabdymo laikas: 112 ms Saugumo atstumas: 192 mm

Būklė: naujas, Pressing force: 100 t Max. stroke: 380 mm Clearance between uprights: 1100 mm Cylinder diameter: 220 mm Piston rod diameter: 90 mm Piston base diameter: 120 mm Pressing speed: 2.47 mm/s Feed speed: 7.54 mm/s Return speed: 9.06 mm/s Motor power: 2.2 kW Machine dimensions (L x W x H): 1665 x 865 x 2140 mm Weight: 970 kg Accessories / Special features: • Movable cylinder • Chrome-plated, hardened piston with removable base • Integrated pressure gauge Podpfxjhauyyj Acaegp • Pressure regulation • Two speeds and control valve • Adjustable work table • Joystick for piston operation • Dual-action hand pump for high-precision pressing work • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D-44143 Dortmund - Wambel

Gamybos metai: 2001, būklė: paruoštas naudoti (naudotas), Galima įsigyti „Walther Trowal“ vibracinio šlifavimo sistemą. 1) „Walther Trowal G 100-C“ vibracinis džiovintuvas, pagaminimo metai: 2001 m., naudingasis tūris: 70 l, didžiausia šildymo galia: 3 kW, didžiausia apdirbamo gaminio įstrižainė: 160 mm, talpyklos skersmuo: 980 mm, iškrovimo aukščio diapazonas: 730–1030 mm, įkrovimo aukščio diapazonas: 765–1065 mm, darbinio talpyklos viršaus aukščio diapazonas: 885–1185 mm. 2) „Walther Trowal CD 110“ apskritasis vibratorius, pagaminimo metai: 2001 m., bendrasis tūris: 110 l, naudingasis tūris: 73 l, didžiausia apdirbamo gaminio įstrižainė: 160 mm, sijų paviršiaus plotas: 1632 cm², sukimosi greitis: 1000 aps./min., didžiausia išcentrinė jėga: 17540 N, svoris: 450 kg. Pridedami įvairūs šlifavimo elementai. Yra dokumentacija. Galima apžiūrėti vietoje. Pedpfx Aozmylwjcaogp

Būklė: geras (naudotas), Gamybos metai: 1994, Ref. No.: 17540 Manufacturer: ARBURG Pgsdpfx Asyiz U Tscaop Model: 270 C 500-100 RUNHOUR Only 100 Year of manufacture: 1994 Clamping Unit Clamping force: 50 tons Opening stroke: 350 mm Tie bar spacing (h x v): 270 x 270 mm Minimum mould height: 200 mm Platen size (h x v): 405 x 405 mm Injection Unit Screw diameter: 25 mm Injection volume: 67 cm³ Shot weight (PS): 61 g Injection pressure: 2,500 bar Dimensions and Weights Dimensions (L x W x H): 3.3 x 1.5 x 2.0 m Machine weight: 2,400 kg Additional Information: Laboratory machine with exceptionally low operating hours The offered ARBURG 270 C 500-100 was built in 1994 and comes from the training and laboratory department of a university. The machine was not used for series production, but mainly for training and testing purposes. According to the control system, only approx. 100 operating hours and just 867 cycles have been logged. The machine is equipped with a hydraulic drive system and the proven ARBURG Dialogica control unit. In addition, it features an integrated crane system to facilitate tool and component change. The scope of delivery also includes an unused replacement screw with a diameter of 15 mm and a complete additional plasticising unit. This provides the machine with extra flexibility for various applications. Thanks to its extremely low usage, traceable provenance, and extensive additional equipment, this is a rare opportunity on the used machinery market.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1998, Minimalus įrankio įmontavimo aukštis: 200 mm Pgsdpfxszkfh So Acaop Maksimalus plokščių atstumas: 550 mm Atramų atstumas: 270 x 270 mm Sraigtinių varžtų skersmuo: 15 mm Uždarymo jėga: 400 kN Įskaičiuota: temperatūros reguliavimo įrenginys Įskaičiuota: robotas, skirtas medžiagų padavimui Staklės yra labai geros būklės ir prijungtos prie elektros tinklo.

Būklė: naujas, AEG Modicon AM-C 916-100 CPU plokštė, serijos Nr. 0007107, nenaudota, 100 % veikianti Pedji D Tu Ajpfx Acaogp

Gamybos metai: 1987, būklė: naudotas, x-travel: 2,800 mm y-travel: 800 mm z-travel: 1,300 mm Machine weight approx. 3 t STIEFELMAYER Manually Operated 3D Measuring and Marking Machine Type: System C-100 Year of manufacture: 1987, Measuring Stand No.: 314 710 87 Working Area: X-axis (horizontal): approx. 2,800 mm Y-axis (cross): approx. 800 mm Z-axis (vertical): approx. 1,300 mm Psdst Hw I Nspfx Acaegp Worktable size: 3,500 x 1,000 x 360 mm Working height above floor: 750 mm Installed rotary table, swiveling: 800 mm Measuring carriage cross sections: 100 x 100 mm or 60 x 60 mm Height of worktable above ground: 700 mm Worktable thickness approx.: 360 mm Total height of assembled measuring machine: approx. 2,800 mm Weight: approx. 3,000 kg Special Features / Accessories: • Side-mounted measuring carriage system C with cross-section 100 x 100 mm or 60 x 60 mm for Y-measuring arm • Mounted rotary table with vernier display 0 – 360°, can be easily removed • Mounted measuring counter Type MZ 2000 as digital display with network connection and RS232 interface • 2 longitudinal rulers as workpiece stops, approx. 2,400 mm long • 6 height-adjustable leveling feet • Swiveling tray, extensive marking accessories • RENISHAW measuring probe Condition: good – available from stock, under power Delivery: ex-stock – as inspected Payment: strictly net – upon receipt of invoice We kindly await your order. We also have other measuring machines and surface plates in various sizes in stock. Please enquire with us.

Būklė: geras (naudotas), 2-column punching tool, cutting tool, punching tool, punch press, die, punch, pillar set -Manufacturer: Fibro punching tool pillar set -Type: 201.31.056. DIN 9822 C 100 x 80 -Punch: see photos -Dimensions: 340/160/H235 mm Pjdpfeivql Sox Acaegp -Weight: 23 kg

Būklė: naudotas, Temperature controller, temperature sensor, temperature adjustment, signal converter, temperature limiter, electronic temperature controller display -Manufacturer: Kfm, temperature controller display -Type: 800 710 Pjdpepcmt Tofx Acaogp -Temperature range: 0...100°C -Voltage: 220V / 48–62 Hz -Quantity: 2x displays available -Price: per unit -Dimensions: 125/100/H50 mm -Weight: 0.4 kg/unit

Būklė: geras (naudotas), Sąsaja, matavimo duomenų surinkimo įrenginys, bandymų įrenginys, telemetrijos sistema, jutiklio sąsaja Podpsw S E Dkofx Acaogp -Gamintojas: Renishaw, jutiklio sąsaja iš koordinačių matavimo staklės Stiefelmayer C 100 413514 -Tipas: PI 200 -Matmenys: 185/140/A90 mm -Svoris: 1,5 kg

Būklė: geras (naudotas), Sąsaja, matavimo duomenų kaupimo prietaisas, bandymų įrenginys, telemetrijos sistema, zondo sąsaja, lazerinė matavimo sistema - Gamintojas: Renishaw, lazerinė matavimo sistema iš koordinačių matavimo mašinos Stiefelmayer C 100 413514 - Tipas: RGH22 D07S06 - Matmenys: 130/90/H45 mm - Svoris: 0,2 kg Pgjdpfx Acjw S E E Isaop

Būklė: geras (naudotas), Sąsaja, duomenų kaupimo įrenginys, bandymo įrenginys, telemetrijos sistema, zondo sąsaja, elektroninis modulis (spausdintinė plokštė) - Gamintojas: Stiefelmayer, plokštė iš koordinatinės matavimo mašinos Stiefelmayer C 100 413514 Pedpfx Acsw S E Eueaegp - Tipas: 413100-89 - Matmenys: 115/80/A55 mm - Svoris: 0,2 kg

Būklė: geras (naudotas), Flat gear motor, geared motor, electric motor, electric geared motor, flat geared motor, flat gear motor -Manufacturer: KEB, flat geared motor -Type: F 4.2 C DK 100 LX 4 W TW i= 11.38 Pedpfx Ajt Hy Thjcaegp -Speed: 50 rpm -Motor: Type SK 100 L/40 -Power: 3.0 kW / 1410 rpm -Hollow shaft: Ø 40 x 150 mm -Protection class: IP56 -Dimensions: 445/230/H360 mm -Weight: 60 kg

Būklė: labai geros būklės (naudotas), CTS Type: TSS-70/350-A Water-cooled Refrigeration Unit For sale is a high-quality thermal shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/350-A. This unit is designed for performing thermal shock tests and is typically used in industrial, research, and quality assurance applications. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and cyclic temperature tests Pjdpjy Hkgbsfx Acajgp Technical Specifications: Type: TSS-70/350-A Temperature Range: - Hot chamber: +50°C to +200°C - Cold chamber: -70°C to +100°C Electrical Data: - Connection: 400 V, 3/N, 50 Hz - Rated power: approx. 20.4 kW - Rated current: approx. 36.5 A Refrigeration System: - Refrigerants: R404A / R23 - Pre-cooling stage: approx. 6.0 kg - Cooling stage: approx. 3.0 kg - Water-cooled Features / Equipment: - CTS control panel with touch display - Microprocessor-controlled regulation and monitoring system - Programmable operation - Digital setpoint and actual value display - 2-zone system (hot and cold chamber) - Automatic carrier for shock tests Technical Design: - Separate hot and cold chambers - Carrier system for rapid temperature change - Test chamber made of stainless steel - Removable shelf / wire rack - Viewing window in the door - Water-cooling connections present - Integrated control cabinet Dimensions: - External (HxWxD): approx. 2450 x 2160 x 2200 mm - Internal (HxWxD): approx. 610 x 850 x 680 mm - Weight: approx. 2500 kg Additional Data: - Protection class: IP 54 - Operating overpressure: approx. 25 bar - Test pressure: approx. 27.5 bar For your safety as a buyer, please note the following! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: see pictures (Specifications subject to change and errors excepted!) We are happy to answer any further questions by phone.

Būklė: labai geros būklės (naudotas), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. The device is used to carry out temperature shock tests and is typically utilized in industry, research, and quality assurance sectors. Application areas: - Material testing - Aging tests - Electronics and component testing - Temperature shock and thermal cycling tests Technical Data: Type: TSS-70/130 Test chamber volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient to +180°C Cooling rate: approx. 4 K/min from ambient to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change speed: - Max. 100 K/min mean for shock test cycles (without heat radiation) Changeover speed: - ≤ 15 min between -65°C and +200°C (with 10 kg ICs) Changeover time: < 10 seconds Electrical Data: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Rated current: approx. 29 A On-site fuse: 32 A slow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Equipment / Features: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Program operation (up to 100 test programs possible) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external test item control - Fault signal on potential-free contact Load capacity up to 30 V DC, 2 A EMC tested Technical Design: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber / transfer basket made of stainless steel, material no. 1.4301 - Insert rack made of stainless steel wire - Tubing port NW 50 with sealing plug - Compressed air connection 1/4" male thread - Condensate drain, non-pressurized R 1/2" female thread - Safety door locking mechanism - Lockable door with window Dimensions according to installation diagram: External dimensions approx.: 2335 x 940 x 1820 mm Intake dimensions approx.: 1990 x 940 x 1652 mm Chamber dimensions: Height approx. 410 mm, Width approx. 480 mm, Depth approx. 660 mm Window: 300 x 300 mm Further Data: Podpoy Hkd Hjfx Acaegp Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average power consumption per test cycle: approx. 8 kWh Important safety information for buyers: The following measures are carried out on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful checks, the chambers undergo a documented test run. Condition: used Scope of delivery: see images (Specifications subject to change and error) For further questions, please feel free to contact us by phone.

Būklė: labai geros būklės (naudotas), CTS CW-60/5.5 – Water-Cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Device Description This climate test chamber allows functionality or material properties of a test item to be evaluated under varying temperature and humidity conditions. Efficient air circulation with a correspondingly high recirculation volume ensures optimal transfer to the specimen. The air handling section is located at the rear of the chamber interior. The aggregates are housed in a separate frame at the back of the device and are easily accessible. The control system is located in a separate switchgear cabinet, with the control panel mounted on the cabinet door. For dehumidification, the chamber is equipped with a self-regenerating compressed air dryer. The test space can also be purged with fresh air via a blower. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear, with specimen and radiant heat, measured at supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5°C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 - ±3% r.H. over time Technical data based on an ambient temperature of +25 °C, nominal voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: Interior (test space/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Interior dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm Exterior dimensions: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Pgodpfx Aszizmuecajp Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power consumption: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A - Protection class: IP 54 Technical Execution: - Cooling unit: water-cooled, low noise, semi-hermetic - Infinitely variable power adjustment via electronic monitoring and control system - Uses environmentally-friendly refrigerants R 23 / R 404 A Notes: - Inspection by appointment (46325 Borken) - Shipping via freight forwarding available – cost & arrangements on request - Scope of delivery: (see picture) (Subject to modifications and errors in technical data and information!) For further questions, feel free to contact us by phone.

Būklė: labai geros būklės (naudotas), CTS CW-60/5.5 – Climate Test Chamber, Water-Cooled The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed to perform temperature and humidity testing on multiple test specimens simultaneously. Device Description The climate test chamber enables the functional or material properties of a test object to be tested under the influence of temperature and humidity. Efficient air circulation with a high recirculation volume ensures effective climatic transfer to the specimens. The air handling unit is located at the rear of the chamber interior. The refrigeration units are positioned behind the machine in a separate frame and are easily accessible. The controller is housed in a separate control cabinet, with the control panel integrated into the cabinet door. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The test space can be purged with fresh air via a blower. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Linear temperature change rate with test specimen and radiant heat, measured in the supply air - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climate Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ± 0.5 K over time - Humidity deviation: ±1 – ±3% r.H. over time The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimen, no radiant heat, and without additional accessories. Dimensions: Internal Dimensions (Test / Usable Space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2300 mm; Width: 1600 mm; Depth: 1550 mm External Dimensions: - Height: 2800 mm; Width: 2250 mm; Depth: 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz Pedpfx Aezizmnecajgp - Rated power: 58.3 kW (including 5 outlets) - Rated current: 86.0 A - Protection class IP 54 Technical Features: Refrigeration Unit - Water-cooled, low noise, semi-hermetic design - Infinitely variable power adjustment via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Notes Viewing by appointment possible (46325 Borken) Shipping via forwarding agent possible – costs & arrangements on request Scope of delivery: (see photo) (Subject to changes and errors in the technical data, specifications subject to confirmation!) Please feel free to contact us by phone for further questions.

Būklė: labai geros būklės (naudotas), CTS CW-60/5.5 – Climate Test Chamber, Water-Cooled The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed to perform temperature and humidity testing on multiple test specimens simultaneously. Device Description The climate test chamber enables the functional or material properties of a test object to be tested under the influence of temperature and humidity. Efficient air circulation with a high recirculation volume ensures effective climatic transfer to the specimens. The air handling unit is located at the rear of the chamber interior. The refrigeration units are positioned behind the machine in a separate frame and are easily accessible. The controller is housed in a separate control cabinet, with the control panel integrated into the cabinet door. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The test space can be purged with fresh air via a blower. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Linear temperature change rate with test specimen and radiant heat, measured in the supply air - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climate Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ± 0.5 K over time - Humidity deviation: ±1 – ±3% r.H. over time The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimen, no radiant heat, and without additional accessories. Dimensions: Internal Dimensions (Test / Usable Space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2300 mm; Width: 1600 mm; Depth: 1550 mm External Dimensions: - Height: 2800 mm; Width: 2250 mm; Depth: 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (including 5 outlets) - Rated current: 86.0 A - Protection class IP 54 Psdpfx Acszizmboajgp Technical Features: Refrigeration Unit - Water-cooled, low noise, semi-hermetic design - Infinitely variable power adjustment via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Notes Viewing by appointment possible (46325 Borken) Shipping via forwarding agent possible – costs & arrangements on request Scope of delivery: (see photo) (Subject to changes and errors in the technical data, specifications subject to confirmation!) Please feel free to contact us by phone for further questions.

Būklė: naudotas, mytron Model: T2240 Water-cooled temperature chamber Technical data: External dimensions: Width 1435 mm, Height 1955 mm, Depth 2590 mm Test chamber dimensions: Width 1050 mm, Height 1400 mm, Depth 1600 mm Test chamber volume: approx. 2240 liters Cable entry ports: 2 x 100 mm right 2 x 100 mm left Temperature range: –40 °C to +100 °C at 23 °C ambient temperature Temporal temperature stability: +/- 0.5 °K Spatial temperature stability: +/- 1.0 °K Cooling: Water cooling, Inlet and outlet: 1'' female thread Cooling water shut-off via solenoid valve when device is OFF Fault display for chiller malfunction Cooling water consumption: inlet temp. approx. 15 °C, approx. 15 l/min, outlet temp. approx. 22 °C (continuous cooling approx. 27 °C) Mains connection: 3NPE AC 50 Hz 400 V, 32 A CEE plug Power consumption: approx. 6.5 kVA Protection: 3 x 20.0 A time-lag, 3 x 10.0 A time-lag Lighting: 25 watt each, left and right sides of test chamber Exhaust connection: DN 100 mm push-fit system Safety device: Electronic overtemperature protection, fixed setting Smoke gas monitoring with audible alarm Viewing window: triple-glazed 130 x 360 mm Refrigerant: R404A, approx. 10 kg Weight: approx. 850 kg Condition: used Pgsdezizg Uspfx Acasp Scope of delivery: (see picture) (Specifications are subject to change and errors excepted!) Further questions can be answered by phone.

Būklė: labai geros būklės (naudotas), CTS Model: TW-60/9 Water-cooled Temperature Test Chamber CTS Temperature Test Chamber, Model TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical specification: Cooling unit: - Water-cooled, low-noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerant R23 / R404 A Control: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for customer-side test item control Technical performance data: Temperature testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K over time - Average temperature change rate, measured with test item and heat input, at air supply: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% loaded - Heat input: 3000 watts continuous Technical data based on ambient temperature +25 °C, rated voltage 400 V, without test item, without heat input, and without additional equipment. Dimensions: - Test volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber inner dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 48.9 kW - Rated current: 74.9 A - Protection class: IP54 - Cooling water connections: cooling water supply/return R1 ¼” internal thread - Condensate drain: non-pressurized, R1” internal thread - Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Specifications are subject to change and error!) Pgjdozizghjpfx Acajp We are happy to answer further questions by phone.

Būklė: labai geros būklės (naudotas), CTS Model: TW-60/9 Water-cooled Temperature Test Chamber CTS Temperature Test Chamber, Model TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical specification: Cooling unit: - Water-cooled, low-noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerant R23 / R404 A Control: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numerical input of setpoints - Error messages in plain text Pgedozizdyopfx Acaop - RS 232 interface - Free switching channels for customer-side test item control Technical performance data: Temperature testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K over time - Average temperature change rate, measured with test item and heat input, at air supply: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% loaded - Heat input: 3000 watts continuous Technical data based on ambient temperature +25 °C, rated voltage 400 V, without test item, without heat input, and without additional equipment. Dimensions: - Test volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber inner dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 48.9 kW - Rated current: 74.9 A - Protection class: IP54 - Cooling water connections: cooling water supply/return R1 ¼” internal thread - Condensate drain: non-pressurized, R1” internal thread - Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Specifications are subject to change and error!) We are happy to answer further questions by phone.