Teka Airtracker Basic pirkti naudotą (5 702)

Būklė: beveik kaip naujas (parodų įrenginys), mašinos/transporto priemonės numeris: 20170140, TEKA AirTracker Basic – Ambient Monitoring System Professional ambient monitoring system capable of measuring fine particulate matter, temperature, humidity, and noise pollution. More than just a particulate monitoring system! - Certified measurement sensors - Highly visible LED display indicating particulate pollution levels - Individually configurable threshold settings for particulate concentrations - Integrated TEKA-Connect - WLAN-enabled AirTracker - Control interface for ventilators or filtration systems from the TEKA product range - Display and analysis of measurement data - Readout and visualization of measurement values - Trend indicator for assessment / Data logger - Data retrieval via web interface - Flexible installation: wall, ceiling, and stand-alone unit. One device, multiple applications! - Built-in next-generation high-performance PC (MX6 dual-core) - WiFi/UART control The innovative, intelligent ambient monitoring system for the future. The European branch of the World Health Organization (WHO) has called for stricter implementation of EU air quality standards. TEKA addresses these with an innovative, intelligent solution: AirTracker air quality monitoring. The newly developed sensor of the TEKA AirTracker series detects particles smaller than 100 nanometres, granting a measurement sensitivity from 0 to 30 mg/m³ with an accuracy of ±0.1 mg/m³—documented and supplied with verification certificate. Building trust through transparency. Dcjdpfev Taq Rjx Af Asg High-tech sensors guarantee reliable measurement values and operational safety. Individually adjustable threshold and limit values pave the way for a secure working future. Once the configured threshold is reached, the sensor indicates the current fine particulate concentration status via two highly visible, large-format LED bars operating with traffic light functionality. Optionally, with the AirController, ventilators or filtration units from the TEKA product series can be automatically triggered based on dust concentration. Ready-to-go: Industry 4.0 – TEKA AirTracker. Facilities can document compliance with statutory occupational safety regulations either manually or via the optional data logger, proactively before inspections by professional associations. Staff health and preventive measures always in focus—build lasting trust. Dust, whether coarse or fine, down to nanoparticles, fine dust categories such as PM2.5 for type A dust or PM10 for type E dust—the TEKA AirTracker, featuring its newly developed sensor, monitors particulate matter within a radius exceeding 30 meters, with certified precision of +/- 0.1 micrometers—experience real safety. The TEKA AirTracker also offers additional innovative sensors as standard: ambient temperature, humidity, and noise levels are simultaneously measured. Networked sensors/actuators represent the future of Industry 4.0. TEKA is setting the standard in this field today. TEKA’s sensor and actuator technology is already a key component of modern industry. With a compatible smartphone, tablet, or PC, the TEKA AirTracker app can be downloaded to display real-time readings for ambient temperature, humidity, fine particulate concentration, and noise levels. Various configuration and functional options within the app further optimize ease of use and functionality. There are many ‘dust sensors’ available. However, only certified, networked sensors that document measurement data guarantee true quality and safety.

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, veleno skylė: 20 mm, tekėjimo skersmuo: 180 mm, tekėjimo ilgis: 350 mm, veleno greitis (maks.): 2 500 aps./min, veleno greitis (min.): 50 aps./min, bendras svoris: 52 kg, Techniniai duomenys Parametras Specifikacija Ašies atstumas tarp centrų 350 mm Dcjdpoyud H Nofx Af Aog Sukimo skersmuo 180 mm Veleno kūgis MK3 Uodegos kūgis MK2 Griebtuvo skersmuo 100 mm Veleno skylė 20 mm Metrinių sriegių diapazonas 0,5–2,5 mm Sukimosi greičio diapazonas 50–2500 aps./min. Variklio galia 0,55 kW Svoris 52 kg Staklių matmenys (I × P × A) 810 × 305 × 370 mm Įranga ir priedai - Pakeičiamų dantračių komplektas - Drožlių apsauga - 4 padėčių įrankių laikiklis - 3 žandikaulių griebtuvas 100 mm - Griebtuvo apsauga - Griebtuvo raktas - Vidinių šešiakampių raktų komplektas - Žandikaulių komplektas - Fiksuotas centras - Gręžtuvo griebtuvas - Strypas Pristatymas Pristatymas klientui galimas. Transporto išlaidos apskaičiuojamos individualiai transporto įmonės. Jei domitės kitomis staklėmis, apsilankykite mūsų svetainėje.

Būklė: naudotas, As-new CNC Chuck Lathe TAIKAN Type HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 CNC contour control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Maximum turning length with chuck: approx. 300 mm Turning diameter - nominal diameter: 250 mm Swing diameter over bed: 500 mm Axis travel Z-axis: 385 mm Axis travel X-axis: 200 mm Feed speed (X + Z): 1-8000 mm/sec Rapid traverse speed (X): 30,000 mm/min Rapid traverse speed (Z): 36,000 mm/min Spindle speed max.: 4,500 rpm Spindle bore: 66 mm Draw tube bore: 50 mm Spindle nose: presumably A2-6 Workpiece weight incl. chuck: max. 200 kg Spindle drive motor power: 11 kW Power supply: 400 Volt, 50 Hz - Electronic handwheel - USB, LAN data interface, + CF card slot - Drum turret with 12 tool stations - Hydraulic 3-jaw power chuck Ø 215 mm - Infinitely variable spindle speed Dcsdpfx Afjwz Rifo Ajg - Coolant system - Chip conveyor with rear discharge + simple chip trolley Machine footprint with chip conveyor: Length 2,200 mm x Depth 2,750 mm x Height 1,700 mm Machine installation dimensions: Length 2,200 mm x Depth 1,750 mm x Height 1,700 mm Chip conveyor dimensions: Length 2,700 mm x Width 600 mm x Height 1,400 mm Weight: 3.5 t Very good condition – as new Machine comes from a showroom and has only few operating hours.

Gamybos metai: 2019, būklė: geras (naudotas), Dust extraction unit, welding fume extractor, self-cleaning cartridge filter, pneumatic, vacuum system suitable for plasma cutting, laser cutting, sandblasting, soda blasting, shot blasting, and all types of dry dust. Brand: TEKA / Bystronic Model: Filtercube 4H / FilterBys Version 2 Year of manufacture: 2019 The filter is cleaned by a microprocessor-controlled system with compressed air pulses during operation, ensuring high efficiency of the unit. Low compressed air consumption thanks to the "Power-Spray" system. The Filtercube central filtration unit equipped with cartridge filters is the ideal solution for nearly all fume and dust extraction applications. The fan is located on the clean air side, minimizing the risk of explosion. Applications: - Central extraction system for multiple welding stations - Extraction system for welding robots - Extraction system for thermal cutting and grinding tables - General hall ventilation system (push-pull system, displacement system) - Extraction system in combination with extraction tables - Extraction system for grinding of non-explosive materials Specifications: - 5.5 kW fan motor - Airflow: 3800 m³/h - Negative pressure: 3250 Pa - Inlet diameter: 250 mm - Filtration surface: 100 m² - Equipped with "DUST-VAC" unit that automatically transfers the collected dust to a separate container Dcsdpfenyhvqsx Af Aog - Option to order new filter cartridges adapted to customer requirements - Complete with technical documentation.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, filtravimo plotas: 20 m², siurbimo galia: 3 500 m³/val, neigiamas slėgis: 3 000 Pa, Mobilus suvirinimo dūmų ištraukėjas, dulkių ištraukimas, savivalantis, pneumatinis, vakuuminis TEKA filtras. Modelis: TK-PF Mobilus filtravimo ir ventiliacijos įrenginys. Skirtas suvirinimui, šlifavimui ir visų rūšių sausoms dulkėms. Filtras automatiškai išvalomas suspausto oro impulsais darbo metu, todėl užtikrina aukštą įrenginio efektyvumą. Ventiliatorius 1,1 kW galios – trifazis Dsdpfx Aey Hq Rtof Aocg Maksimalus našumas – 3500 m3/h Maksimalus vakuumas – 3000 Pa 2 ištraukimo rankenos, po 4,00 m ilgio. sandėlio nr. – 1106

Būklė: naudotas, įvesties srovės tipas: trifazis, filtravimo plotas: 40 m², siurbimo galia: 4 000 m³/val, neigiamas slėgis: 2 500 Pa, Suvirinimo dūmų nutraukimo įrenginys, dulkių ištraukėjas, automatiškai išsivalantis, pneumatinis, vakuuminis TEKA markės filtras. Dcsdpfsy Hhd Dsx Af Asg Skirtas suvirinimo, šlifavimo, smėliavimo ir visų rūšių sausoms dulkėms. Filtravimo kasetės. Filtras valomas pneumatiniais suslėgto oro impulsais darbo metu, todėl užtikrinamas didelis įrenginio efektyvumas. Ventiliatorius, kurio galia 4 kW. Našumas: 4000 m³/h Vakuumas: 2500 Pa Filtravimo plotas – 40 m² Įvado skersmuo – 315 mm Įrenginio matmenys: Aukštis – 2,50 m Plotis – 1,25 m Gylis – 0,97 m Sandėlio numeris – 1116

Būklė: labai geros būklės (naudotas), Parduodamas profesionalus pramoninis oro ištraukėjas TEKA, modelis STRONGMASTER BIA, skirtas suvirinimo dūmams ir oro teršalams ištraukti. ‼️ LABAI MAŽAS DARBO LAIKAS – TIK 1550 DARBO VALANDŲ (kas yra itin reta tokiam įrenginiui) ⚙️ Techniniai duomenys: Gamintojas: TEKA (Vokietija) Modelis: STRONGMASTER BIA Našumas: 3000 m³/val. Dsdpfx Afsyz Dils Aecg Maks. vakuumas: 2500 Pa Variklio galia: 1,1 kW Maitinimas: 400V (3 fazės + N + PE) Dažnis: 50 Hz Nominali srovė: 2,5 A Apsaugos klasė: IP54 Valdymo įtampa: 24V Svoris: apie 130 kg 🔧 Komplektacija: Lankstus ištraukimo vamzdis Pramoninis filtras Valdymo pultas Darbo valandų skaitiklis Mobilus rėmas su ratukais 🔍 Būklė: Naudotas įrenginys, geros techninės būklės. Matomi normalūs naudojimo požymiai. ✅ Mažas darbo laikas – tik 1550h ➡️ Mažai eksploatuotas ➡️ Didelis tolimesnio naudojimo potencialas

Būklė: naudotas, Gamybos metai: 2010, įvesties srovės tipas: trifazis, filtravimo plotas: 50 m², siurbimo galia: 5 000 m³/val, neigiamas slėgis: 3 000 Pa, Dust extraction, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum system for plasma, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. Brand: TEKA Model: Filtercube 2H Year of manufacture: 2010 The filter is cleaned by a microprocessor-controlled compressed air pulse system during operation, ensuring high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. The central filter ventilation unit Filtercube, equipped with cartridge filters, provides an ideal solution for almost all smoke and dust filtration issues. The fan is located on the clean side, which minimizes the risk of explosion. Applications: - Central extraction system for multiple welding stations Dsdpfx Ajw Aw Nnjf Aocg - Extraction system for welding robots - Extraction system for thermal cutting and grinding tables - System for general hall filtration ventilation (push-pull or displacement system) - Extraction system combined with extraction tables - Extraction system for grinding non-explosive materials Specifications: Sound-insulated fan with 4 kW power. Airflow: 5000 m³/h Vacuum: 3000 Pa Inlet diameter: 315 mm Filtration area: 50 m² Option to order new filter cartridges tailored to customer requirements. Stock no.: 0004

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2018, veikimo valandos: 41 h, Kaip naujas mobilusis ištraukimo įrenginys iš TEKA Dcedpsy Ey Rgefx Af Asg Tipas: Filtoo

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2005, Betono maišyklė TEKA TZK 2,0 Maišymo našumas: 2 m³ Vidaus keraminė danga Dar neišardytas Dsdpfxjywn T Tj Af Aocg

Būklė: geras (naudotas), Gamybos metai: 2009, Dust extraction, filter ventilation, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum-type TEKA AIRTECH P24 Main applications of these systems are industrial plants and welding shops where it is not possible to implement source extraction, or where source extraction alone is insufficient to maintain air cleanliness in the facility. Side-mounted channels with extraction points capture contaminated air and direct it to the filtration section. Here, fine dust particles accumulate on the surface of the cartridge filter. A pulse of compressed air cleans the cartridge filters automatically at pre-set intervals. When compressed air strikes, the particles collected on the filter surface are detached and fall into the dust collection bin. The cleaned air returns to the work area via individually adjustable long-range nozzles. At the same time, the discharge of purified air directs the polluted hall air towards the extraction channels. Filters are cleaned by a microprocessor controller with compressed air pulses during operation, ensuring high device efficiency. Low compressed air demand thanks to the 'Power-Spray' system. The AIRTECH series is IFA-certified according to EN ISO 15012-1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a stationary local exhaust welding fume extraction unit. Specifications: - Capacity: 24,000 m3/h - Motor power: 15 kW - Fan in sound-insulated housing - Control cabinet with electrical documentation Year of manufacture: 2009 Dimensions: Dcjdjl Dw U Dspfx Af Aeg - Height: 6.80 m - Base dimensions: 1.95 m x 1.90 m - Overall width: 3.60 m x 2.00 m Several units available. Price listed is for one unit.

Būklė: geras (naudotas), Gamybos metai: 2010, Dust extraction, filter ventilation, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum TEKA AIRTECH P18. The main application areas for these systems are industrial plants/welding shops where it is not possible to implement local extraction or where local extraction is insufficient to maintain air quality in the workshop. Laterally mounted ducting with capture points draws in contaminated air and directs it to the filtration section. Here, contaminants in the form of fine particles accumulate on the surface of the cartridge filter. A compressed air pulse cleans the cartridge filters automatically at preset intervals as required. When the compressed air pulse is triggered, the particles collected on the filter surfaces are detached and fall into the dust collection bin. Cleaned air is returned to the workspace through individually adjustable long-range nozzles. At the same time, the outlet of the purified air directs the contaminated hall air towards the extraction ducts. The filter is cleaned by a microprocessor-controlled system using compressed air pulses during operation, ensuring high device efficiency. Low compressed air consumption thanks to the “Power-Spray” system. The AIRTECH series devices are IFA-certified according to EN ISO 15012-1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as permanent, stationary extraction units for welding fumes. Specifications: Capacity – 18,000 m³/h Motor power – 11 kW Vacuum – 2,250 Pa Filter surface – 324 m² (9 filter cartridges of 36 m² each) Fan with soundproof enclosure Control cabinet with electrical documentation Noise level – 72 dB Year of manufacture – 2010 Dimensions: Height – 5.00 m Dcedpfjib Dadjx Af Asg Base width – 1.44 m x 1.44 m Overall width with exhaust ducts – 8.5 m Total weight approx. 2,400 kg

Būklė: labai geros būklės (naudotas), filtravimo plotas: 50 m², siurbimo galia: 650 m³/val, neigiamas slėgis: 38 000 Pa, High-pressure fume extraction unit, dust extractor, TEKA self-cleaning filter. Filter suitable for plasma and laser applications. Due to its design, the system is especially recommended for processing oily, sticky fumes, as well as dusts. The unit is equipped with an automatic cartridge filter impregnation system and an activated carbon filter to neutralize odors generated during processing. The filter is pneumatically cleaned with compressed air pulses during operation, resulting in high efficiency of the unit. The extraction system is intended for specialized applications where the filtered fumes and dusts may be moist and adhesive. The addition of impregnating agent captures moisture from the fumes, thereby protecting the filters from clogging. In this case, the service life of the cartridge filters is extended. After the cleaning process, the controller sends a pulse to a solenoid valve located on the top lid of the barrel filled with powder. The applied magnetic pulse agitates the impregnating powder, which is then transported into the suction pipeline. The powder coats the working surface and forms a protective layer on the filters. The unit is like new – it has only 126 operating hours!!! 7.5 kW turbine in a sound-absorbing enclosure with noise silencer. Capacity: 650 m³/h at a vacuum of up to 38,000 Pa!! Filter area: 50 m² Inlet diameter: 100 mm Dedorhidmopfx Af Ajcg Supplied with pneumatic slide valve, noise suppressor, and partial pipework.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, bendras svoris: 500 kg, įėjimo įtampa: 400 V, bendras plotis: 1 000 mm, bendras ilgis: 1 000 mm, bendras aukštis: 3 250 mm, tūrio srautas: 3 000 m³/val, triukšmo lygis: 75 dB, filtravimo plotas: 100 m², siurbimo galia: 4 500 m³/val, neigiamas slėgis: 2 500 Pa, suslėgto oro jungtis: 5 juosta, galia: 5,5 kW (7,48 AG), įėjimo dažnis: 50 Hz, įėjimo srovė: 16 A, darbinė temperatūra: 20 °C, valdymo įtampa: 24 V, Įranga: Tipinė plokštelė prieinama, dokumentacija / vadovas, Pagaminimo metai 2018. 5,5 KW / 11,5A Djdpfxoyzqplj Af Ajcg - Su „Softstarter” ir Siemens PLC valdikliu. - KAINA ĮSKAITOJE: 4 x 25m2 NAUJOS filtro kasetės, sumontuotos įrenginyje. - Įrengtas suslėgto oro valymo sistema, valdoma Delta P. - Su TEKA DUSTVAC dulkių išleidimo sistema – leidžia dulkes iškrauti į 200L statinę. - Ex works Soerendonk (NL), pakrauta ant sunkvežimio be papildomų mokesčių. Išbandyta, galima pamatyti darbo sąlygomis mūsų dirbtuvėje. - Tiekiama su įtraukta „Softstarter” opcija. - KAINA ĮSKAITYTA: 4 x 25m2 NAUJOS filtro kasetės, sumontuotos įrenginyje. - Įdiegta suslėgto oro dulkių valymo sistema, valdoma Delta P. - Su DUSTVAC sistema, ši sistema leidžia dulkes kaupti 200L statinėje. - Ex works Soerendonk (NL), pakrauta ant sunkvežimio be papildomų mokesčių. - Parduodama tokios būklės, be garantijos. - Patikrinta vietoje ir mūsų dirbtuvėse, veikia tinkamai. - Galima patikrinti ir išbandyti.

Būklė: naujas, Air flow rate: 1,860 m³/h Suction/pressure: 2,900 Pa Drive power: 1.1 kW Filter surface area: 10 m² Sound level: 72 dB(A) Connection: 400/50 V/Hz Dcjdpfshp S Trsx Af Ajg Space requirement: approx. 665 x 1,100 x 1,495 mm Weight: approx. 200 kg Sanders article no. 10224980 Extraction unit, welding fume extraction (with automatic cleaning) - Extraction arm 3 m, internal joints - Filter cartridge: Dust class M - Pre-filter: Baffle plate - Power supply: 3Ph+N+PE The filter unit ----- The mobile filter unit Cartmaster IFA is particularly suitable for welding applications with both unalloyed and alloyed steels, galvanized material, and aluminium, where heavy fume generation occurs, thanks to its automatic cleaning system. It meets all relevant safety requirements for equipment in the welding fume class "W3" (high-alloy steels with alloying elements > 30% nickel-base alloy). When used as intended, the unit can be operated in recirculation mode, as the requirements for the exemptions according to TRGS 560 are fulfilled. The specially developed contamination-dependent cleaning system ensures reliable cleaning performance of the filter cartridge, thereby providing optimal extraction performance throughout the entire operating period. Dislodged particles fall into a dust collection drawer for easy disposal. The powerful screw-type fan guarantees a high volumetric flow even with saturated filter cartridges. The filter media ----- A baffle plate serves as a pre-separator for coarse particles. The subsequent filter cartridge (dust class M, separation efficiency > 99%) filters even the finest fumes and dust particles. The factory-applied coating increases cartridge service life. The extraction arm ----- The extraction arm can be easily positioned due to the 3 internal spring-assisted joints and remains self-supporting in the set position. A throttle valve integrated into the extraction hood enables adjustment of the volume flow.

Būklė: naujas, Air flow rate: 1,860 m³/h Suction/Pressure: 2,900 Pa Drive power: 1.1 kW Filter area: 10 m² Sound level: 72 dB(A) Connection: 400/50 V/Hz Space requirements: approx. 665 x 820 x 1,365 mm Weight: approx. 165 kg Mobile extraction unit, welding fume extractor (manual filter cleaning by compressed air) - Extraction arm: 3 m, internal joints - Filter cartridge: Dust class M - Particle pre-separator: impact plate - Power supply: 3Ph+N+PE Dcsdpfxjkm Ryns Af Ajg The Filter System ----- The mobile filter unit type StrongMaster IFA is particularly suitable for welding operations with unalloyed and alloyed steels, galvanized materials, and aluminum where heavy fume generation is present. It complies with safety requirements for devices in welding fume class "W3" (high-alloyed steels with alloying elements >30% based on nickel). When used as intended, the system can be operated in recirculation mode, since the conditions for exemptions as per TRGS 560 are met. The filter is cleaned from the clean air side via a maintenance door using a compressed air gun. Filtered particles collect in a dust drawer for subsequent disposal. The powerful screw fan ensures a high airflow even when filter cartridges are saturated. The Filter Media ----- An impact plate serves as a pre-separator for coarse particles. The subsequent filter cartridge (dust class M, separation efficiency >99%) filters even the finest fumes and dust particles. The cartridge is factory-coated to increase service life. The Extraction Arm ----- The extraction arm can be easily positioned thanks to the 3 internally mounted, spring-assisted joints and remains self-supporting in the set position. A throttle valve integrated into the extraction hood allows adjustment of the airflow volume.

Gamybos metai: 2000, būklė: geras (naudotas), Stock number: 2739 Manufacturer: TEKA Year of manufacture: 2000 Model: PP-DC Dcsdpjmf Uzxefx Af Asg Serial number: 201320 Airflow rate: 320 m³/h Max. negative pressure: 22,000 Pa Connection diameter: 50 mm Features: mobile, portable Accessories: 3,000 mm hose Connection: 1.2 kW, 230 V Weight: approx. 40 kg Dimensions: 300 x 300 x 850 mm (without hose)

Būklė: paruoštas naudoti (naudotas), Specifikacijos: Maitinimo įtampa | V | 230 Dažnis | Hz | 50 Darbo valandos: 2690 val. Srovės tipas | Ph | 1. Variklio galia | kW | 2,4 Oro srauto tūris max. | m³/h | 640 Neigiamas slėgis max. | Pa | 15000 Apsaugos klasė | | IP54 Izoliacijos klasė | | F Ištraukimo efektyvumas | % | >99 Plotis | mm | 365 Gylis | mm | 768 Aukštis | mm | 801 Svoris | kg | 70 Garso slėgio lygis | dB(A) | 70 Leistina aplinkos temperatūra | °C | +5 iki +35 (eksploatacijos metu) | | -10 iki +40 (transportuojant ir sandėliuojant) Užteršto oro temperatūra surinkimo taške max. | °C | +50 Leistinas max. drėgnumas | % | 70 Geros darbinės būklės. Prašome peržiūrėti ir kitus mūsų skelbimus. Dedsxvpumjpfx Af Aocg

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2009, For sale are two used TEKA scrapers: 1. THS 4020, year of manufacture 2009, scraper arm: 16.00 m, Dedpfx Afev Tb A Ie Aocg 2. THS 6022, year of manufacture 1993, scraper arm: 16.00 m. Both units are fully operational. For further details, please refer to the nameplate.

Būklė: geras (naudotas), Gamybos metai: 2002, mašinos/transporto priemonės numeris: 121630011, Offer 24386 Technical data: Dcodpfxou Aafdo Af Ajg - Mobile cartridge filter unit with articulated extraction arms - Suitable for extracting welding fumes during welding of steel, stainless steel, aluminium, as well as unalloyed or galvanized steels - Welding fume class: W3 - Control unit with digital display - Separation efficiency: 99% - Air flow rate: approx. 3,000 m³/h - Max. static pressure: 2,500 Pa - Filter surface area: 20 m² - Automatic filter cleaning - 360° articulated extraction arm: 4,000 mm - Arm diameter: 160 mm - Drive – fan: 400 V / 1.10 kW - Required space: approx. W 700 x H min. 2,150 x D 1,100 mm - Weight: approx. 150 kg - Operating hours (read): 980 h

Būklė: naujas, Airflow rate 2,500 m³/h Dsdefrzt Uspfx Af Aecg Hose length 3,000 mm Total power requirement 1.1 kW Machine weight approx. 0.08 t Space requirement approx. 0.58x0.58x0.58 m Mobile extraction unit for a single workstation, IFA-certified The newly developed filter unit filtoo by TEKA is a mobile filtration system designed for a wide range of applications in the filtration of fumes, dusts, and gases. The unit has been tested according to DIN EN ISO 15012-1 (2005) and is IFA (formerly BGIA) certified (IFA No. 201020469/1140) for welding fume class "W3" (separation efficiency: > 99.9%). When used as intended, the filtoo is suitable for capturing fumes generated by welding and thermal separation or joining processes when working with unalloyed steels, including high-alloy chromium/nickel steels. Additionally, the filtoo has been awarded the GS mark, confirming that the unit complies with the requirements of the Equipment and Product Safety Act (GPSG).

Būklė: naujas, Gamybos metai: 2026, High-performance and precise CNC milling plotter CORMAK C1325 BSP, equipped as standard with SERVO drives. The rigid construction made of steel and cast iron ensures proper rigidity and resistance to overloads occurring during operation. This machine is designed for processing and cutting wooden materials, chipboards, MDF, OSB, plywood, as well as synthetic materials such as PVC, plexiglass, and dibond. Each machine purchase includes free training at our headquarters! Construction - Welded rigid steel frame, - Gantry arms made from thick, powder-coated, hardened steel sheet, providing increased rigidity and higher machining accuracy of the workpiece. Work Table - Hybrid technology work table, - T-slots for manual clamping of materials up to 1300 x 2500 mm. Drive System - High-power drive motors ensure rapid acceleration and high speeds in all directions. - X and Y axes operate on user-acclaimed, high-quality HIWIN rack guides for enhanced durability and precision. - All axes ride on rail-type linear guides. - Equipped with tool height sensor. - Linear bearings: trapezoidal rails. Spindle - High-class spindle characterized by excellent durability. - Additional air-cooling system. - Equipped with high-quality machine bearings for extremely quiet operation and increased longevity. - Tool height measurement sensor included. - Spindle speed range: 4,500–18,000 RPM. - Tool clamping with ER32 collets (3 pcs included): 1/8", 1/2", and 5-6 mm diameters. Software - Supplied as standard with ARTCAM PRO software. - Optional: UCANCAM V11 CAD/CAM CNC software (Polish version available). - Allows quick and easy design of parts, converting projects to G-code; import of files from other programs possible. DSP Control - Digital Signal Processing (DSP). - Machine controller features dedicated processor and RAM for reliable, user-friendly operation. - Controller ensures smooth performance and machining accuracy. - No need to restart the program upon power loss. Dodpfeiz A Ezjx Af Ascg - Built-in controller memory allows repeated operation without having to reload the program. Technical Specifications Spindle: 5.5 kW / 18,000 RPM inverter, air-cooled Working area: 1,300 x 2,500 mm Maximum spindle height: 350 mm Control: DSP Program resolution: 0.001 mm Software: Included Power supply: 400V Weight: 980 kg Machine dimensions: 2,100 x 3,100 x 2,200 mm Table height: 715 mm Guideways: linear Drive transmission: rack and pinion IMPORTANT! The machine is equipped with a function that saves the last G-code path. In case of a malfunction or power failure, it resumes work from the last point, avoiding loss of time and material. For more information, please contact us.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2016, Automatinė dalijimo mašina Koenig Rex Basic - naudota - pagaminimo metai: 2016 - 4 eilių - svorio diapazonas: 30-90 g - našumas apie 6 000 vnt./val. - rankinis valdymas - nerūdijančio plieno korpusas - labai gera techninė būklė - atsiėmimas iš sandėlio / galima siųsti - kaina pagal užklausą Dodpfx Aey H Hnuef Ajcg

Būklė: naudotas, Gamybos metai: 2012, Nr. 3268 Cutting and Machining Centre Schirmer BAZ 1000-G6 / VU “Basic” Used, year of manufacture 2012 Comprising: - Cutting and machining centre Schirmer BAZ 1000-G6 / VU “Basic” - Steel cut-to-length machine Schirmer SZA 450 - Buffer screwing station Schirmer - Bar machining centre Schirmer SBZ I Cutting and Machining Centre Schirmer BAZ 1000-G6 / VU “Basic” - Cutting length: 300 – 3900 mm - Automatic loading magazine for 9 profiles up to max. 6500 mm in length - Automatic transfer station - Infeed unit for PVC profiles up to 6500 mm in length with NC-positioned gripping tongs, positioning speed up to 150 m/min - Profile length measuring device including optimization software - Automatically adjustable profile guides - Machining station equipped as G-module “Ultra Speed” Machining operations on the PVC profile: - Drainage and ventilation slots/holes in frame, sash, and mullion profiles, handle drilling for entrance doors, striker plate markings, lock case routing - Height measuring device for detecting profile tolerances - Gasket cutting device - VU saw unit with double saw aggregate 2x 45° - Saw unit in standard version with 1 sawing aggregate, swiveling +45° to -45° - Conveyor belt for scrap removal - NC controlled gripper for bar discharge, positioning speed up to 180 m/min - PC machine control: 7-slot ATX industrial PC, Microsoft Win XP Prof., software: TwinCAT NCI - Horizontal circulating buffer for transporting the profiles to the steel infeed station and screwing station for steel infeed with 8 infeed slots - Monitor for steel length display - Automatic label printer Steel Cut-to-Length Machine Schirmer SZA 450 - Automatic loading magazine, max. profile length 6000 mm, profile width 25 - 50 mm, profile height 15 - 60 mm, wall thickness max. 4 mm Dodpfjy Nnnnjx Af Aecg - Infeed unit - Standard saw unit for 90° cuts - Automatic bar discharge - Belt conveyor - Extraction device - Steel scrap processing - Steel length measurement in steel loading magazine Buffer Screwing Station Schirmer - Infeed unit for PVC profiles up to 3900 mm in length - Automatically adjustable profile guides - Screwing station - Steel infeed fingers for reinforcement profiles up to 200 mm insertion depth Bar Machining Centre Schirmer SBZ I - Infeed unit for PVC profiles up to 3900 mm in length - Automatically adjustable profile guides - Measuring probe for automatic determination of the datum point at the profile start - Drilling station with 4-axis CNC control, 2 axes vertical, 1 axis horizontal, and 1 axis for X-feed - NC controlled gripper for bar discharge - Belt conveyor in special version for cross-rejecting - Striker plate visualization software including monitor - Screwing station with screw feed - Guide rail with balancer for bar screwing unit - Bar screwing unit with automatic screw feed System capacity: Approx. 120 window units 1400 x 1500 mm / 8 hours If the machine is expanded with another screwing unit at the buffer screwing station, output increases to approx. 160 units / 8 hours Sale by customer order, ex location near 30625 Hannover, without dismantling, without transport or installation To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended For used machines, all warranties are excluded; sale is subject to: “as viewed”

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, bendri matmenys 950x1000x1500 mm; maitinimas 230 V, 50 Hz; galia 2 kW; oro tiekimas 5/7 bar; našumas apie 400 ciklų/val.; skirta padėklams 310x245x50/100 mm; vakuuminis siurblys 21 m3; svoris ±150 kg. Su stalu. Dcedpoyxf Uqefx Af Aog