Sterilus Indas pirkti naudotą (3 252)

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2015, veikimo valandos: 100 h, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Gamintojas: GEA (TDS) Tipas: aseptinis bakas Pagaminimo metai: 2015 Su žmogaus anga su maišykle įskaitant vožtuvus Hodeyrdzbjpfx Abvenl įskaitant vožtuvų valdymo spintą Būklė: kaip naujas, niekada nenaudotas

Būklė: naudotas, Gamybos metai: 2013, mašinos/transporto priemonės numeris: 12052, bendras ilgis: 4 700 mm, bendras plotis: 1 600 mm, bendras aukštis: 2 400 mm, slėgis: 6 juosta, temperatūra: 80 °C, Eko-Pil KMPN 3500 Mašinos duomenys Pavadinimas: Eko-Pil KMPN 3500 Bendri matmenys: 4700 × 1600 × 2400 mm Maks. ruošinio matmenys: Ø 450 × 3500 mm Leidžiama apkrova: 200 kg Grynoji masė: 4000 kg Bendroji masė: 6500 kg Darbo valandos: 10 608 h Procesų duomenys Terapinės terpės temperatūra: 0–80 °C Talpos tūris (plovimas): 1160 l Talpos tūris (skalavimas): 1050 l Vandens slėgis: maks. 6 bar Vandens jungtis: 1" Pavaros duomenys Variklio sukimosi kryptis: dešinėn Galingumo duomenys Durų pavara: 0,37 kW Volelio pavara: 0,55 kW Pagrindinis siurblys (plovimas): 7,5 kW Siurblys (plovimas): 7,5 kW Džiovinimo ventiliatorius: 2,2 kW Ventiliatorius: 0,3 kW Bendra įdiegta galia: 100 kW Šildymas Hnsdpfxsy H I Nys Abvel Plovimo talpa: 5 × 6,0 kW Skalavimo talpa: 5 × 6,0 kW Džiovinimas: 4 × 4,5 kW Techniniai duomenys Maitinimas: 3 × 400 V, 50 Hz

Būklė: visiškai atnaujintas (naudotas), Key features of the device: - The bottom of the kettle is made from AISI 316 stainless steel, which is recommended for products with acidic properties. - All other exterior structural components are made from AISI 304 stainless steel. - Tilting of the kettle is motor-driven (up/down switch). Hodpfx Abjtuiy Nsvjnl - Pressure in the kettle jacket is regulated by a mechanical pressure valve (0.5 bar) and a pressure gauge. - Water replenishment in the jacket is done via an integrated tap. - In the steam-heated version, the jacket is heated by supplying external process steam. The amount of steam inside the jacket is controlled by automatic valves that open and close the steam supply. - Capacity: 150 liters. - Diameter: 600 mm. - Dimensions: 1445x1180x1090 mm, 21 kW.

Būklė: naudotas, Maišymo bakas, Slėginis indas, Naudota mašina Hnsdpfx Aoxacl Tjbvel Gamintojas: Robert Hinkel & Co Modelis: 9601 Tūris: 200 L Darbinis slėgis: 3 bar Elektriniai duomenys: 380V; 2,0A; 0,75 kW Bendri matmenys: Ø 850 mm, aukštis 1780 mm Konstrukcija: Cilindrinis rezervuaras su švelniai išgaubtu dangčiu ir dugnu, su maišytuvu. Rezervuaro dugnas ir korpusas dvigubomis sienelėmis su šildymo apvalkalu. Rezervuaro dangtis nuimamas, tvirtinamas flanšine varžtų jungtimi. Dangtyje yra valymo/inspekcijos anga. Medžiaga: Anglinis plienas, dažyta išorė.

Būklė: geras (naudotas), Talpyklos sukamasis įrenginys, katilo sukamasis įrenginys, suvirinimo sukamasis įrenginys, suvirinimo stalas, suvirinimo sukamasis stalas - Talpyklos sukamasis įrenginys: Suvirinimo sukamasis įrenginys - Pavaros variklis: 0,75 kW su reguliuojama pavara - Keliamoji galia: kg - Volelių atstumas: 315 - 965 mm, volelio Ø 230 x 160 mm, bendras plotis - Vyniojimo greitis: 0,05–0,95 m/min į dešinę/kairę - Valdymo blokas: su paminomis - Atskiros dalys: žr. nuotraukas Hnodpfx Ajy R N Dyebvsl - Transporto matmenys: 1140/730/H750 mm / 890/440/H750 mm / 700/600/H955 mm - Bendras svoris: 714 kg

Būklė: naudotas, bendri matmenys 900x1450x1380 mm; katilo talpa 240 litrų; maitinimo įtampa 400 V/3/50 Hz; galia 16,5 kW; slėgis 2,5 bar; 3 įdedamosios krepšeliai 1/3; svoris 332 kg. Hsdpfxjyx Sqxe Abvenl

Būklė: naudotas, bendri matmenys: 810x1130x1260/1900 mm; talpa: 120 l; maitinimas: 400 V; galia: 9 kW; slėgis: 2,5 bar; kompiuterinis valdymas; 3 krepšeliai. Hedpfx Aboyx Sqrjvjnl

Būklė: naudotas, Gamybos metai: 2017, Overview This brewhouse was manufactured in 2017 by a Finnish company. It is a manually operated 3-vessel system with a capacity of 1,000 liters, consisting of a hot water tank, wort kettle, and mash tun. The system is located in a separate warehouse and is available immediately. An inspection can be arranged upon request. Hodpowfqyxjfx Abvsnl Technical Specifications - Capacity: 1,000 liters per batch - Number of vessels: 3 - Degree of automation: Manual operation Scope of delivery - Hot water tank - Wort kettle - Mash tun - Connection accessories

Būklė: geras (naudotas), With this little jug, you can automatically refill your battery with demineralized water. Indispensable! Price includes shipping within the Netherlands. Hnsdpfjy Sm Hhex Abvjl

Gamybos metai: 2019, būklė: naudotas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 867721275, The HOBART PREMAX FTPi 2-S-AN-R-DS6 (Premium configuration) is a powerful, industrial conveyor dishwasher designed for high capacity and maximum efficiency in institutional catering settings (such as large-scale kitchens, canteens, and catering operations). Hobart dishwashers employ various technologies to boost energy efficiency, with heat pump technology (HP) primarily utilized for drying and energy savings. Heat pump for drying: Hobart offers models featuring heat pump technology to heat the drying zone and enhance energy efficiency. Wastewater heat recovery: The wastewater heat recovery system uses energy from hot wastewater (60 °C) to preheat the incoming fresh water up to 40 °C before it enters the boiler. Drying & Energy: By utilizing heat pumps (HP), energy from the machine environment is used to heat the drying air, thus lowering total energy consumption. Advantages: These technologies result in lower operating costs and improved energy performance. Due to its comprehensive features, this machine only has a power consumption of 27.8 kW—a remarkable value for this category—delivering significant, long-term savings on operating costs. The system was dismantled by Hobart’s factory service team. Previously, the washing system was in use at a well-known industrial elevator manufacturer and became available due to a complete facility rebuild. Estimated completion of maintenance: approx. calendar week 24. Commissioning is also carried out by the factory service team (for a fee) to ensure the warranty is valid. You are acquiring a factory-refurbished, fully operational conveyor dishwasher, with commissioning performed by the Hobart factory service, including demonstration of detergent dosing. Highlights of the PREMAX FTPi Series: - SENSOTRONIC Washing Intelligence: The machine automatically adjusts consumption (water, chemicals, energy) according to the degree of soiling and quantity of dishes. - LOW-CHEM detergent saving system: Reduces detergent consumption by up to 80% through a special pre-wash zone and water regeneration. - CLIMATE-PLUS energy-saving system: Integrated heat recovery reduces energy costs. - Automated processes: Includes tray and cutlery lift-off magnet for efficient washing. Model designation breakdown FTPi: PREMAX conveyor dishwasher (Intelligent) 2: Number of wash zones (two) S: SENSOTRONIC (wash intelligence) A: Automatic operation N: Standard feed zone R: Right-to-left working direction DS6: Key technical specifications and features for this specific model (as per manufacturer): - Capacity: Designed for high plate throughput (maximum over 5,000 plates/hour in S configuration) - Water consumption: Approx. 130–160 l/h (depending on settings/load) - Orientation: R (right-to-left operation, i.e., feed on the right, exit on the left) - Machine type: Conveyor dishwasher - Model: Premax FTPi 2-S-AN-R-DS6, FHP - Heating type: Electric - Voltage: 400 V - Power supply: 3-PE - Fuse protection: 3 x 50 A - Power consumption: 27.8 kW Hsdpfoy N N Icex Abvsnl - Serial number: 867721275 - Year of manufacture: 2019 - Washing zones: S pre-wash/wash/rinse/S dry - Total length: 685 cm - Discharge: 100 cm - Conveyor width: 44 cm - Conveyor height: 61.2 cm - Height: 190 cm - Height with open hood: 215 cm - Width: 68 cm - Exhaust: Climate TE-PRO Subject to change and errors.

Gamybos metai: 2004, būklė: beveik kaip naujas (naudotas), Rabolini F 120 x 162, nuoroda 2995 Metai: 2004 Didžiausias lapo dydis: 120 x 162 cm Pneumatinė sankaba ir stabdis Skaitiklis Viršutinis valdymo pultas Kieta pjovimo plokštė Centrinis tepimas Hnjdsy E Hkmopfx Abvjl Greito veiksmo rėmas Būklė – labai gera

Gamybos metai: 1999, būklė: naudotas, 3 įrenginių kompaktiška darykla, skirta 20 hl išpilstymo kiekiui Mašina (priedas): 20 hl kompaktiška alaus darykla Virimo tūris: 2000 l Ilgis: 2600 mm Plotis: 5000 mm Aukštis: 4500 mm Valdymas / kontrolė: Rankinis valdymas su kaitinimo programos reguliatoriumi 'Barbie und Kühner 7600' Hedpfew U A T Iex Abvsnl Medžiaga: Nerūdijantis plienas / varis Pagrindinė konstrukcija: Virimo indai sumontuoti ant rėmo konstrukcijos Įranga: Maišymo / misos katilas, filtravimo indas, pirmojo tekėjimo indas/whirlpool, verpimo stotis, nerūdijančio plieno valdymo spinta, nerūdijančio plieno rėmas su operatoriaus aikštele, laiptai, vamzdynai, siurbliai ir armatūra

Gamybos metai: 1995, būklė: naudotas, Only pre-clarified products with a composition that provides normal filterability may be processed with this filtration unit. Machine (Additional): CFS System Flow rate: 400 hl/h continuous Operating pressure: 6 bar Operating temperature: 105 °C Capacity: 1,456 l Current: 10 A Voltage: 220 V Water supply: Cold water: min. 150 hl/h; Hot water (max 65 °C): min. 150 hl/h Compressed air: Process air: 4 - 6 bar; Control air: 5 - 8 bar Length: 1.4 m Width: 1.3 m Height: 1.9 m Base structure: Base frame with control and measuring components and filter vessel; cleaning module Hsdpfxsvcqv No Abvsnl Equipment: 98 filter candles, 3 piston diaphragm pumps (dosing), centrifugal pump with frequency converter (WT circuit), various analog and digital sensors (flow, pressure, level, temperature, conductivity), various valves, control cabinet Weight: 3,450 kg

Būklė: naudotas, Machine (Details): Year of manufacture mostly 2003 Cast wort volume: 150 hl Grain bill: 2,500 kg Hsdpfxovcqrwj Abvjnl Power supply: Three-phase current Voltage: 400 V Frequency: 50 Hz Equipment: Lauter tun, NDK whirlpool-wort kettle system with external wort boiler, additional whirlpool, trub collection system, hop dosing unit Peripherals: Wort heater for lauter tun, kettle vapor condenser

Gamybos metai: 2001, būklė: naudotas, The Pall CFS system is designed as a standalone unit and can be installed directly upstream of the filling line without the need for a buffer tank. It is a fully independent process unit consisting of the following components: filter vessel, piping and connections, membrane cleaning system (CIP), integrity testing system, and control panel. The hygienic design, straightforward integrity testing, and full automation ensure the system's microbiological safety and allow operation typically by filling line personnel. Cluster filtration arranges filter elements into clusters. Each cluster is equipped with its own outlet valve. During filtration, all clusters are open. Cleaning, sterilization, and integrity testing are performed per cluster. Advantages of the CFS principle: - Extended service life - On-site integrity testing - Cluster-specific integrity diagnostics - Special rinsing function - High specific flow rate - Short rinsing times - Uniform flow through all filter elements - Minimal water consumption - Fast replacement of filter elements - Controlled back-flushing - Minimal beer loss - High biological safety - Continuous availability This filtration system is suitable only for pre-clarified products that exhibit normally filterable characteristics in their composition. Machine (Additional Information): CFS System Flow rate: 400 hl/h continuous Operating pressure: 6 bar Operating temperature: 105 °C Volume: 1456 l Current: 10 A Voltage: 220 V Water: Cold water: min. 150 hl/h; Hot water (max 65 °C): min. 150 hl/h Compressed air: Process air: 4–6 bar; Control air: 5–8 bar Length: 1.40 m Width: 1.20 m Height: 1.85 m Basic construction: Base frame with control, measurement components, and filter vessel; cleaning module Hjdpjvcqx Dofx Abvonl Equipment: 98 filter cartridges, 3 piston membrane dosing pumps, centrifugal pump with frequency inverter (WT circulation), various analog and digital sensors (flow, pressure, level, temperature, conductivity), various valves, control cabinet Weight: 3,450 kg

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, Parduodamas nuotraukose matomas orkaitės tipo virimo katilas VOK. Dujinis, tiesioginio kaitinimo. Hidraulinis dubens ir maišytuvo judėjimas. Bendras dubens tūris – 190 litrų, tačiau vienu metu tinkamas virti maždaug 150 litrų. Tinka virti sriuboms, troškiniams, uogienėms, padažams. Taip pat tinka virti ryžiams, makaronams ir pan. Hjdpfx Aevyinxjbvenl Geros būklės. Pagaminta Taivane. Bendri matmenys: 1550 mm x 1400 mm x 2000 mm.

Būklė: geras (naudotas), Gamybos metai: 2013, Keliamoji galia 1200 kg Stalo sukimosi greitis 80 - 1600 mm/min. Ritinėlio skersmuo 200 x 50 mm Ruobinio skersmuo 20 - 800 mm Hnedpjy Erxijfx Abvel Matmenys I-P-A 520 x 470 x 390 mm variklis Matmenys I-P-A tokie pat mm atsekiklis Įtampa 230 V / 50 Hz Svoris 56,0 kg Dabartinė nauja kaina apie 3 000 eurų Speciali kaina pagal užklausą Produkto aprašymas: - Skirta cilindriniams ruošiniams apdirbti - Žemo profilio rėmas - Sukimo ritinėliai su poliuretano danga - Aiškiai suprantami valdymo elementai - Nuolat reguliuojamas sukimosi greitis - Valdymo elektronika apsaugota tvirtu uždaru korpusu - Su kojiniu jungikliu paleidimui/sustabdymui - Variklis su nuolatinės srovės elektriniu varikliu ir pavara

Būklė: naudotas, Parduodamas naudotas nerūdijančio plieno planetinis maišytuvas Grieser (Vokietija), modelis VPL 350. Maišytuvas turi du spiralinius maišytuvus ir vieną šoninės sienelės grandiklį. Maišytuvai dirba per diržinę pavarą nuo elektrinio variklio 15 kW, 1460 aps./min., 400 V, 50 Hz ir planetinės pavarų dėžės. Maišytuvų pakėlimas ir nuleidimas atliekamas hidrauliniu įrenginiu. Komplekte yra 9 mobilios nerūdijančio plieno maišymo talpos. Kiekvienos talpos vidinis skersmuo – 695 mm, gylis – 500 mm, bendra talpa – 365 l, darbinė talpa – apie 350 l. Dvi talpos turi dugninius išleidimo vožtuvus, valdomus rankiniu būdu. Taip pat pridedamas mechaninis pakėlimo ir vertimo įrenginys talpų ištuštinimui. Maišytuvas turi vietinį valdymo skydelį ir elektros spintą. Techninė dokumentacija – bendras vadovas ir elektros schemos, pateikiamos skaitmeniniu formatu. Įrengimas šiuo metu išrinktas. Paskutinis naudojimas – maisto pramonėje. Specifikacija: Galia: 15 kW Hnsdjyma E Ejpfx Abvol

Būklė: geras (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, išorinis skersmuo: 900 mm, bendras svoris: 480 kg, reikalingas aukštis: 1 900 mm, Mueller reaktorius – slėginis indas su maišytuvu. Procesinis indas iš V4A su magnetiniu maišytuvu, bendras tūris 311,8 l (užpildymo tūris 220 l), išorinio apvalkalo užpildymo tūris 7,3 l, maksimali indo slėgis 1 bar, maksimali išorinio apvalkalo slėgis 6,2 bar, maksimali išorinio apvalkalo temperatūra 150°C, pagaminimo metai – 2013, savasis svoris 476 kg, serijos numeris 10130562104-01, maišytuvas TransKem TK/PMBE/DMT (galia 3 HP), prieš tai naudotas vaško lydymui, būklė – naudotas, veikiantis. Pristatymas per ekspeditorių galimas pagal susitarimą. Hnedpfxsv S Srdo Abvjl

Būklė: labai geros būklės (naudotas), 2 x DCN JetCook indai, 500 litrų ir 650 litrų, tiesiogiai iš uždarytos kūdikių maisto gamyklos. Visa kita įranga parduodama. Hsdjy I Di Sepfx Abvenl

Būklė: naujas, NEW! completely stainless steel Loading capacity: max. approx. 500 kg (depending on product) MC control with 50 programs Hsdpey E H Dtsfx Abvenl Infinitely variable speed from 0 to 9 revolutions per minute with Büsch vacuum pump with water filter Dimensions (L x W x H): approx. 2,550 x 1,300 x 1,650 mm

Būklė: paruoštas naudoti (naudotas), Siūloma pilnai sukomplektuota dvigubo maišymo įranga, 2 x 3000 l talpos, pagaminta iš aukštos kokybės V2A nerūdijančio plieno, įskaitant propelerinį maišytuvą iš V2A, su bepakopiu apsukų reguliavimu. Apžiūra galima susitarus iš anksto. Hnodpfx Ajy A Sk Tsbvol

Gamybos metai: 2012, būklė: naudotas, Funkcionalumas: nepatikrintas, 20HL alaus darykla ir 2 000 litrų fermentacijos indai (2012), įskaitant: Magusa SDGS indas 2 500 litrų (2013), Magusa maišymo kubilas 2 000 litrų (2013), Magusa infuzijos indas 2 500 litrų (2013), virimo katilas, CLT, 5 – Zhejiang Dayu 2 000 litrų fermentacijos indai (2012), šaldytuvas. Hjdpfx Asy Rukxjbvsnl

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, The tank is used in pneumatic control systems for various devices and serves to dampen compressed air pulsations within the system, ensure optimal compressor operation, partially remove moisture and oil from compressed air, and create an air reserve. Technical specification of the 1000L pressure vessel The compressed air pressure vessel is a cylindrical pressure device comprised of two ellipsoidal end caps, a shell with nozzles, and valves. Its primary function is to dampen pulsations in the compressed air system, contributing to optimal compressor operation and assisting in the removal of moisture and oil from compressed air. High-quality pressure vessels are especially suitable for demanding working conditions. Our 1000-liter, 11 bar pressure vessel is a robust and capacious unit, ideal for storing compressed air and other gases under high pressure. It is engineered to withstand high pressures and ensure safe gas storage. This tank is used in a variety of sectors, including industry, construction, automotive, and home workshops. It can be easily connected to an air compressor or other compressed air generation equipment, providing a reliable gas source for production processes and utility applications. With its 1000-liter capacity, this vessel allows for longer operating periods without frequent refilling. The 11 bar working pressure ensures the vessel can safely contain gas at high pressure, which is particularly advantageous for power-intensive applications. Our 11 bar, 1000L pressure vessel is manufactured from high-quality materials, guaranteeing durability and safety. It is equipped with appropriate valves and safety features to prevent leaks and maintain safe pressure levels. Furthermore, our tank is supplied with complete documentation, technical passports, certificates, and attestations, including information about materials used in the manufacturing process. It has undergone inspection by a Notified Body of the Office of Technical Inspection and is marked with a nameplate containing the CE mark and the Notified Body number (UDT). In summary, the 1000-liter, 11 bar pressure vessel is a reliable unit that enables the storage of compressed air or other gases under high pressure. Its versatility makes it a dependable gas source for a wide range of industrial and utility applications. Our offer includes a broad selection of pressure vessels with various capacities, making it easy to match the model to specific installation requirements. Our tanks are made from high-strength, pressure-resistant steel and coated with specially prepared paint both inside and outside. Vertical and horizontal installation models are available for flexible integration into varied settings. Our tanks are also used in pneumatic control systems for various devices. Technical data: Weight (kg): 230.00 Connections: 8 Connection sizes: 1/2", 2" Hnodpfxsv Axzms Abvjl Dimensions: 222.7 x 85 cm Tank capacity (l): 1000 Working pressure (bar): 11 Wall thickness (mm): 5 Diameter (mm): Ø 850 Height (mm): 2250 Manufacturer: Cormak

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, 500 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Key Advantages of the 500 L Pressure Vessel - Professional pressure-rated design – made from high-grade 4 mm thick steel, resistant to both pressure and corrosion. - UDT certification and CE marking – compliant with European safety and quality standards. - Working pressure up to 11 bar – suitable for most pneumatic systems, including those with increased demands. - High capacity – 500 liters – ensures stable supply for pneumatic installations and reduces compressor start-up frequency. - Multi-connection inlet system – 6 ports with diameters of 1.1/4", 2", and 1/2" provide flexible integration with various installations. - Superior finish – durable anti-corrosive coating applied both inside and outside the tank. - Universal installation orientation – vertical construction optimizes space usage within the facility. Construction and Technology – Robust Design for Demanding Applications This compressed air vessel has been engineered for intensive use in industrial environments. The body is manufactured from structural steel with a wall thickness of 4 mm, ensuring resistance to pressures up to 11 bar and guaranteeing long service life. All welds undergo rigorous quality checks, while the tank surfaces are protected with anti-corrosive paint resistant to chemical and environmental factors. Hjdoxbzbpepfx Abvenl The vessel is fitted with a nameplate featuring the CE mark and a UDT notified body number, confirming its approval for use in both Polish and European markets. The set includes complete technical documentation, a pressure vessel passport, and material certificates. Standard Equipment - Connection ports: 6 pcs – diameters 1.1/4", 2", 1/2" - Nameplate with CE mark - UDT notified body number - Full technical documentation and pressure vessel passport - Internal and external anti-corrosive coating