Sriegimo Frezavimo Staklės Ir Krumpliaračių Frezavimo Staklės pirkti naudotą (49 987)

Būklė: geras (naudotas), Frezarka WANDERER 16/E, wyprodukowana w Niemczech. Rok produkcji: 1962. Maszyna sprawna, w stanie roboczym. Kjdpfjw Al U Eox Ab Nedp Aby uzyskać więcej informacji, prosimy o kontakt.

Būklė: naudotas, Techninės detalės: Kodpfjv U Un Hjx Ab Nsdp z eiga: 1250 mm Apsisukimo skersmuo virš staklių lovos: 260 mm Ruoinio skersmuo virš lovos: 500 mm Ruoinio skersmuo virš atramos: 250 mm Centų aukštis virš lovos: 260 mm Frezavimo ilgis: 2000 mm Didžiausias modulis: 8 / 12 Bendras galios poreikis: 9,5 kW Apytikslis staklių svoris: 3,8 t

Būklė: naudotas, Gamybos metai: 1985, Wheel diameter – max. 80 mm Wheel width 150 mm Module – max. 2.5 Module – min. Total power requirement 10 kW Machine weight approx. 2,400 kg Fully automatic hobbing machines for worm gear cutting Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: Max. wheel diameter without parts magazine approx. 80 mm Max. wheel diameter with parts magazine approx. 50 mm Max. module 2 / 2.5 Axial cutting length approx. 150 mm Max. workpiece installation length approx. 200 mm Milling slide swivels up to 90 degrees Cutter – diameter 24 – 50/63 mm Max. radial travel of the milling slide 0–14/18 mm Max. milling cutter shift 25 mm Cutter speeds 212 – 2,000 rpm Axial feed rate stepless 0.05 – 4.0 mm/rot. Radial feed rate stepless 0.2 – 200 mm/min. Milling spindle drive 3 kW Total drive approx. 10 kW – 50 Hz – 380 Volt Weight approx. 2,400 kg Accessories / Special equipment: Fully automatic operating cycle and minimal auxiliary times enabled by freely programmable SIEMENS programmable controller S5 for all machining steps, e.g. rapid traverse, feed, cutter on/off, for loading device, tailstock, possible shifting, etc. With piece counter, program numbering, and 30-position digital error display. Pneumatic workpiece loading and unloading device parallel to the workpiece axis for shaft-shaped workpieces approx. 140 mm in length x 8 mm Ø, with pneumatic double gripper for loading and unloading workpieces; raw parts are placed in exchange cassettes outside and then inserted into the loading unit. The double gripper places the parts between the workpiece spindle and tailstock; the tailstock quill pushes the parts into the main spindle collet and clamps them simultaneously. Kdsdpot Hw D Refx Ab Nsp Finished parts are ejected from the main spindle and also returned to the (finished parts) cassette by the gripper. The entire process is electrically monitored and controlled. The complete loading device is enclosed with Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: good – 3 machines available, currently 1 machine ready for demonstration and under power. Machine is set up for cutting worm shafts/armature shafts used in variable transmissions for automotive seat adjusters, window regulators, etc.

Būklė: naudotas, Gamybos metai: 1977, Wheel diameter - max. 400 mm Wheel width 280 mm Module - max. 4 Module - min. 1 Total connected load 15 kW Machine weight approx. 6000 kg Space requirement approx. ... m LORENZ Kedst Hw Hxjpfx Ab Njdp Universal Gear Hobbing Machine Type F 400 Year of manufacture 1977 S/N 8687 _____ Min./max. wheel diameter 400 mm Module range 1 - 4 Number of teeth approx. 8 – 210 Milling width approx. 280 mm Max. workpiece installation length approx. 450 mm Milling slide swiveling up to 60° Cutter size (diameter x length) 160 x 220 mm Cutter shifting max. 180 mm Cutter speeds 125-500 rpm Table diameter x bore 375 x 80 mm Feed range: axial 0.31 - 4.00 mm/rev radial 0.12 – 1.60 mm/rev tangential 0.035 – 4.5 mm/min Milling spindle drive approx. 8 kW Total drive power approx. max. 15 kW - 380 V - 50 Hz Weight approx. 6,000 kg Accessories / Special features • Multiple milling programs selectable for climb and conventional milling, as well as for radial/axial milling processes, possibly worm gear milling • Universal milling head with cutter shifting • Hydraulic workpiece clamping on table and hydraulic tailstock • Hydraulically folding counter-holder connection for easier loading • Differential for helical gearing • Infinitely variable speed control, display for speed and amperage • Change gears, various accessories, coolant system * Very robust construction Condition: good – will be demonstrated shortly Delivery: ex stock – as inspected Payment: upon receipt of invoice, strictly net

Būklė: naudotas, Gamybos metai: 1995, Wheel diameter - max. 80 mm Wheel width 120 mm Module - max. 3 Module - min. 1 Control: SIEMENS 840 C Total power requirement: 30 kW Machine weight approx. 7,500 kg Footprint approx. [space missing] m LIEBHERR CNC-controlled gear hobbing machine Type: LC 82 Year of manufacture: 1995 # 0836 Kdsdpfxjt Hw R De Ab Njp --- Wheel diameter max. 80 mm Module 1 – 3 Helix angle +/- 45° Distance table center to tool center: 15 – 160 mm Vertical travel of milling slide: 250 mm Shift range/tool traverse: 180 mm Min. number of teeth: 3 Cutter Ø x length approx.: 90 x 200 mm Cutter speeds up to max.: 800 rpm Feeds in axial/radial/tangential: 20/4/5 mm/rev Max. workpiece clamping length: 250 mm Spindle drive approx.: 8 kW Total drive approx.: 30 kW - 400 V – 50 Hz Total weight approx.: 7,500 kg Accessories / Special equipment: • SIEMENS CNC control type 840 C for 6 axes (i.e. cutter drive/Table drive/Swivel angle of the milling head/axial feed/radial feed/tangential feed) with gear-specific user interface and diagnostic functions for rapid troubleshooting. • With device for automatic insertion of the hob into the tooth gap • Automatic shifting of the cutter axis • Automatic workpiece loading unit SSL = quick swivel loader using a mechanical step transmission and cam disk for fast loading times, with 3-way rotary gripper for blank gripping/working position/unloading. Current workpiece size Ø 30 x 120 mm, helical gearing (pinions) • Workpiece feeding by means of plate chain conveyor (PKB) for workpieces with positive-fit carrier. Additional feed belt for raw and finished parts • Chip conveyor, complete working area enclosure, intermediate coolant tank with pump Complete working area enclosure with sliding door and oil mist extraction, etc. The machine can also be used for dry gear cutting. Condition: satisfactory to good – under power and ready for demonstration, compact design! Delivery: ex-stock – as inspected Payment: net cash – on receipt of invoice

Būklė: naudotas, Gamybos metai: 1992, Wheel diameter – max. 150 mm Wheel width 300 mm Module – max. 4.5 Module – min. (not specified) Total power requirement 20 kW Machine weight approx. 6 t Space requirement approx. (not specified) CNC-controlled horizontal hobbing machine with workpiece portal loader, model A 35 / 36 CNC, year of manufacture 1992 Workpiece diameter / wheel diameter with automatic loading max. 150 mm Workpiece diameter with manual loading max. 200 mm Max. workpiece length approx. 400 mm Axial milling length (Z axis) 300 mm Module range for HSS/Carbide cutters 3 / 4.5 mm Number of teeth min./max. 2–999 Centre distance tool–workpiece min./max. 0–190 mm Workpiece rotation speed max. 0–350 rpm Milling slide swiveling left/right 50 / 60° Cutter size Ø x length 102 x 230 mm Cutter shift max. (Y axis) 100 mm Radial slide travel max. (X axis) 10–150 mm Tailstock travel max. (W axis) 420 mm Cutter speed stepless 0–1,500 rpm Feed range on all axes steplessly adjustable 3.5 or 4 m/min Spindle drive approx. 8.8 kW Total power approx. 20 kW – 220 V/400 V / 50 Hz Weight approx. 6,000 kg Accessories / Special Equipment: MIKRON CNC control type 788 (BWO) with monitor for a total of 8 axes (ABC and WYZ and WV) with conversational programming for creating various gearing cycles, such as helical gearing, worm and worm wheel gearing, crowned gears, with and without shifting, as well as further subprograms. Heavy duty shifting milling head with high cutter speeds and long shifting path, also for 2 cutters, with quick-change system and hydraulic counterbearing. Ksdpfx Ajt Hwxbeb Nsdp Workpiece spindle head (C) with quick-change system (collet chuck) Heavy tailstock with 420 mm travel (W), in combination with an automatic workpiece loading device from GÜDEL Switzerland with a linear portal loader (approx. 1000 mm stroke (V)), swiveling double gripper with jaws for loading and unloading shaft-shaped workpieces (currently approx. 60 mm length x 25 mm Ø x module 1.5), however, without workpiece storage device. Separate coolant unit with magnetic chip conveyor Enclosed full machine guarding with sliding doors 2 machines with workpiece marking devices by BORRIES, unfortunately otherwise without accessories.

Būklė: geras (naudotas), Modulis – maks. 2 Frezavimo ilgis – 135 mm Bendroji galios sąnauda – 2,2 kW Mašinos svoris – apie 1420 kg Reikiamas plotas – apie 2,00 x 1,60 x 1,43 m --> Techniniai duomenys: didžiausias frezavimo skersmuo: Ø 150 mm Kdjdpfx Aszkvuvob Njp --> didžiausias frezavimo ilgis: 135 mm --> didžiausias modulis: 2 --> veleno skersmuo: Ø 24 mm --> veleno tvirtinimas: MK-4 --> frezos sukimosi greitis: 140–1120 aps./min. --> automatinis padavimas Įranga ir priedai: Aušinimo skysčio sistema, frezos, keičiami ratai, naudojimo instrukcija.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1970, Krumplysavimo staklės ZFWZ 6300x40 Gamintojas: WMW-MODUL Modelis: ZFWZ 6300x40/1 Pagaminimo metai: 1970 Didžiausias ratų skersmuo: 7100 mm Krumplių plotis: 1500 mm Didžiausias modulis: 45 Stalo skersmuo: 5300 mm Kjdpfx Abexln Iwe Nsdp Frezuotuvo skersmuo x plotis: 400x500 mm Didžiausias spiralinio kampas: 45 laipsniai Frezuotuvo skersmuo: 500 mm Frezuotuvo apsukos: 9-63 aps./min. Bendras galios poreikis: 47 kW Staklių svoris: 160 t Komplektuojama su standartine frezavimo galva, tangentiniu krumpliaračiu, vidaus frezavimo galva, keičiamais krumpliaračiais, atramomis. Galimas vaizdo įrašas.

Būklė: naudotas, Gamybos metai: 1969, Wheel diameter - max. 160 mm Wheel width 355 mm Module - max. 4.5 Module - min. 0.5 Centre distance 450 mm Total power requirement 11 kW Machine weight approx. 3.8 t Space requirement approx. 2x1.7x1.6 m Wheel diameter - max. 160/175 mm Wheel width 355 mm Module - max. 4.5 Spindle bore 75 mm Centre distance 410 mm Number of teeth - min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Centre distance between cutter and workpiece - max. 138 mm Centre distance between cutter and workpiece - min. 30 mm Kjdpfx Abovz Ec Io Nedp Milling head - swivelling 120° Cutter speeds 70 - 400 rpm Axial feeds 0.25 - 4.0 mm/rev Radial feeds 0.09 - 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/accessories: - Change gears - Milling arbors - Clamping devices - Documentation

Būklė: naudotas, Techninės detalės: Smailumo aukštis virš staklių: 260 mm Ruonio diametras virš staklių: 500 mm Kdedpov U T Dyjfx Ab Nsp Ruonio diametras virš atramos: 250 mm Frezavimo ilgis: 2000 mm Dantų skaičius: 2 - 50 Pasislinkimas: 0,023 - 5,17 mm/min Maksimalus modulis: 8 / 12 Veleno skylės diametras: 102 mm Ruonio sukimosi greitis: 18 - 224 aps./min Centro įvorės eiga: 100 mm Bendras energijos poreikis: 9,5 kW Apytikslis staklių svoris: 5,2 t Staklių matmenys (IxPxA): 3,6 x 2,1 x 2,0 m Papildoma techninė informacija: Ridinėjimo poslinkis: 0,023 - 5,17 mm/VR Išilginis frezavimas - mm/min.

Būklė: naudotas, Gamybos metai: 2004, Technical details: Maximum wheel diameter: 200 mm Wheel width: 60 mm Maximum module: 7 Machine weight approx.: 15 t Table diameter: 180 mm Table speed range: 100 rpm Cutter speeds: 750 rpm Kdsdpfx Asxc E H Sob Nep Well-maintained gear hobbing machine without feed/automation Available from 24.08.2024

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, CNC kūginių krumpliaračių frezavimo staklės su lanko dantavimu Gleason Nr. 631 Pagaminimo metai: 2011 Valdymas: SIEMENS 840d Modernizuota 2011/2012 m. su nauja valdymo sistema, pavaromis ir kt. Kdjdpfx Aew Tfb Ssb Nsp Staklės buvo pilnai kapitaliai suremontuotos 2011 m. Įdiegta nauja valdymo sistema ir pavaros.

Būklė: labai geros būklės (naudotas), Ratų skersmuo - maks. 130 mm Ratų plotis 180 mm Modulis - maks. 2,5 Modulis - min. 0,3 Sukimosi greitis 140 – 900 aps./min Dantų skaičius - min. 4 Tvirtinimo ilgis maks. 200 mm Valdymas Siemens Rušinio skersmuo - maks. 80 mm Bendra galingumo poreikis 3,5 kW Kodey Umizopfx Ab Nodp Staklių svoris apie 2,9 t Užimamas plotas apie 1,8 x 1,6 x 1,9 m

Būklė: labai geros būklės (naudotas), Gamybos metai: 2002, Ratų skersmuo - maks. 130 / 80 mm Ratų plotis 180 mm Modulis - maks. 4 Modulis - min. 0,5 Veleno apsukos - bepakopės 300 - 3000 aps./min Valdymas Siemens 840 D x eiga 200 mm y eiga 170 mm z eiga 250 mm Kedpexlug Hefx Ab Nodp Frezuotojo galva - pasukama + / - 45° Stalo skersmuo 168 mm Stalo skylė 65 mm Maksimali tvirtinimo ilgis 245 mm Stalo apsukų diapazonas 0 - 1000 aps./min Bendra galingumo poreikis 51 kW Staklių svoris apie 9,2 t Užimama vieta apie 4,5 x 4,0 x 3,2 m

Būklė: labai geros būklės (naudotas), Gamybos metai: 2002, Ratų skersmuo - maks. 350 mm Ratų plotis 230 mm Modulis - maks. 8 Modulis - min. 1 Valdymas Siemens 840 Staklių svoris apie 10,5 t Reikalinga erdvė apie 4,5 x 2,5 x 3,0 m Kdjdjy D T Upepfx Ab Nep Pakrovimo/iškrovimo įranga

Būklė: naudotas, Gamybos metai: 2008, Siemens 840D Control Gear Hobbing Machines for Large Gears Flexible and universal gear hobbing of gears Kdjdpfxjwzypnj Ab Nep Large hobbing machines from Gleason deliver maximum productivity for roughing and finishing cylindrical gears applied across numerous industries: wind turbines, industrial gear units, mining and shipbuilding, gear production, and many others. The guideways are wide and equipped with hydraulically preloaded guides, which in combination with a separate linear guide and backlash-free rollers, ensure precise carriage movements at any feed rate. The table design provides optimal conditions for absorbing and transferring cutting forces to the machine base. The use of hydrostatic table bearings, in conjunction with the proven backlash-free double worm gear drive, guarantees precise table motion as well as the highest flatness and concentricity accuracy of the worktable. This holds true regardless of substantial fluctuations in workpiece weight and/or high machining forces. The motorized hobbing heads for external and internal gearing are tailored to the requirements of modern cutting tools. All machine sizes can be equipped with both external and internal hobbing heads. The drive's performance range takes into account future tool developments. Naturally, the hobbing head drive is also backlash-free. These machines are particularly well-suited for the use of state-of-the-art cutting tool materials, regardless of whether dry or wet machining is preferred.

Būklė: naudotas, Gamybos metai: 2002, Technical details: Maximum wheel diameter: 200 mm Kdjdpfx Abjy Nk Idj Njp Wheel width: 250 mm Maximum module: 3 Minimum module: 0.5 Total power requirement: 45 kW Machine weight approx.: 6.5 t Space requirement approx.: 4.4 x 2.4 x 2.7 m

Būklė: naudotas, Gamybos metai: 2000, Technical Details: Max. Wheel Diameter: 130 mm Max. Module: 3 Total Power Requirement: 15 kW Kdodpfxoy Nk Hgo Ab Nsp Machine Weight approx.: 6 t Space Requirement approx.: 2.3 x 2.5 x 2.17 m Well-maintained CNC Vertical Gear Hobbing Machine for shafts and wheels With tailstock Suitable for hard hobbing (ideal for steering pinions) Rapid Traverse, Radial, Axial: 10,000 mm/min Rapid Traverse, Tangential: 7,500 mm/min Max. Wheel Diameter: 130 mm Max. Module: 3 mm Tangential Slide Travel: 200 mm Radial Slide Travel: 10/100 mm Axial Slide Travel: 300/200 mm Cutter Head Speed: 250–3,500 rpm Cutter Head: swivels +/- 40° Tool Diameter: 80 mm Max. Tool Length: 240 mm Table Speeds: 5–1,000 rpm Milling Spindle Drive: 15 kW Feed Range: mm/min Table Diameter: 132 mm Control: Sinumerik 840 C Connection Rating: 40 kVA Motor Power: 15 kW Weight: 6 t Dimensions: 2300 mm x 2500 mm x 2170 mm Equipment: Hydraulic workpiece clamping Automatic loading system Magnetic chip conveyor

Būklė: naudotas, Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, ruošinio svoris (maks.): 25 000 kg, ratlankio plotis: 3 000 mm, padavimo ilgis X ašis: 1 000 mm, LIEBHERR L3002 CNC Inre och Yttre Kugghjulsfräs Kdodpowdmy Eofx Ab Nep Tillverkningsår 1982, moderniserad 2006 med CNC SIEMENS 840 D. Max hjuldiameter: 3 000 mm. Max spiralvinkel: 45° För invändig och utvändig bearbetning. Effekt: 44/50 kW.

Būklė: naudotas, Gamybos metai: 1963, Technical details: Maximum wheel diameter: 900 mm Maximum module: 10 Machine weight approx.: 8,200 kg Maximum hob diameter: 190 mm Maximum cutter length: 320 mm Cutter speeds (infinitely variable): 13-80 rpm Maximum workpiece length: 750 mm Maximum workpiece diameter: 150 mm Kedpfsvkpu Hjx Ab Nedp LIEBHERR Gear Hobbing Machine L 900 Counter support for cutter arbor missing

Būklė: labai geros būklės (naudotas), Gamybos metai: 1983, Stalo skersmuo: 630 mm Didžiausias darbinis skersmuo: 800 mm Didžiausias modulis: 10 Įrengtas keičiamais krumpliaračiais ir mandrelėmis Kjdpozbhytofx Ab Nedp

Būklė: geras (naudotas), Ratų skersmuo - maks. 145 mm Ratų plotis 110 mm Modulis - maks. 2 Modulis - min. 0,3 Kdjdpfxjy Ivdhj Ab Nsp Sūkių skaičius 112 - 1000 aps./min. Mažiausias dantų skaičius 6 Maksimali spaudimo ilgis 150 mm Bendras reikiamas galingumas 3,5 kW Staklių svoris apie 1,3 t Reikalinga vieta apie 1,3 x 0,8 x 1,4 m

Būklė: geras (naudotas), Wheel diameter – max. 630 mm Wheel width 375 mm Module – max. 10 Clamping table 550 mm Table bore 125 mm Infinitely variable cutter speeds 62 – 390 rpm Taper MORSE 5 Axial feed 0.40 – 6.80 mm/rev Radial feed 0.10 – 1.76 mm/rev Distance from milling spindle to clamping spindle 50 – 425 mm Minimum number of teeth 8 Cutter diameter x width 192 / 215 mm Cutter shift 200 mm Main drive motor 7.5 kW Total power requirement 21 kVa Machine weight approx. 8.2 t Kdsdpfx Absua It Uo Njp Machine equipment: - Universal milling head with tangential adjustment - Pressure reducing valve for counterstay - Magnetic chip conveyor - Year of manufacture approx. 1976

Būklė: geras (naudotas), Gamybos metai: 1984, Maximum wheel diameter: 250 mm Wheel width: 275 mm Module (max): 6 Machine weight approx. 5.5 t The gear hobbing machine ZFWZ 250 is suitable for the efficient production of all hobbed cylindrical gears such as: - Straight and helical spur gears, worm gears and worms, splined shafts, keyway shafts, serrated gears, chain wheels, ratchet wheels, as well as conical and crowned straight and helical gears. Change gears and milling accessories Technical data: - Maximum workpiece diameter: 250 mm - Maximum module: 6 mm - Maximum axial feed travel: 275 mm - Maximum tangential feed travel: 100 mm - Maximum helix angle: 45 degrees - Maximum cutter diameter: 145 mm - Maximum cutter length: 170 mm - Minimum clamping table area: 195 mm - Maximum clamping table area: 470 mm Kdjdpjv T Nqajfx Ab Njp Performance Cutter speeds - Two mechanical ranges: 56 ... 250 rpm - (Standard execution): 90 ... 400 rpm - Infinitely variable in 2 ranges: 63 ... 180 rpm - (Special design DC motor): 140 ... 400 rpm Weight - Net machine: approx. 5000 kg - Electrical cabinet: approx. 800 kg - Hydraulic unit + coolant tank + chip conveyor: approx. 700 kg Overall dimensions (with oil mist filter) - Length: Standard version: 3950 mm DC drive: 3450 mm (or 3350 mm according to the table) - Width: 3300 mm - Height: Machine: 1980 mm Machine with DC drive: 2150 mm Electrical cabinet: 2200 mm

Būklė: naudotas, Gamybos metai: 1989, Wheel diameter – max. 400 mm Wheel width: 275 mm Module – max. 6 Machine dimensions: 300 x 310 x 245 cm Kdsdpfx Abju A I Elo Njp Machine weight approx. 5.0 t Specification: - Maximum wheel diameter: 400 mm - Minimum module: 1 - Maximum module: 6 - Table diameter: 370 mm - Maximum wheel diameter with counter support: 340 mm / without counter brace: 400 mm - Max. axial offset: 275 mm - Max. tangential adjustment: 100 mm - Max. helix angle: 45 degrees - Max. cutter diameter: 145 mm - Max. hob length: 170 mm Performance - Cutter speed: 50–200 rpm - Axial feed, stepless adjustment: 0.2–10 mm/rev - Tangential feed, stepless: 0.1–5 mm/rev - Radial feed for spur gears: 0.1–4 mm/rev - Radial feed for worm wheels: 0.025–1 mm/rev - Axial rapid traverse: 500 mm/min - Tangential rapid traverse: 250 mm/min - Radial (spur gears): 400 mm/rev - Radial (worm wheels): 100 mm/rev - Motor power: 7.4 kW Weight - Machine: 5,000 kg - Electrical cabinet approx.: 800 kg - Hydraulic unit, coolant tank, chip conveyor approx.: 700 kg Dimensions - Length with chain drive (standard): 2,950 mm with DC drive: 3,350 mm - Width: 3,100 mm - Machine height: 1,980 mm Electrical cabinet approx.: 2,400 mm Machine with DC drive approx.: 2,150 mm