Scm T110I 8/26 pirkti naudotą (41 361)

Būklė: naudotas, Techniniai duomenys: Veleno skersmuo: 30 mm Veleno aukštis: 160 mm Pakreipiamas velenas: -10° - 45° Iaodpfx Aszd Ap Tslrju Apsisukimai: 3000/4500/6000/8000/10000 aps./min Rankinis veleno aukščio ir kampo reguliavimas Veleno fiksatorius Darbo stalo matmenys: 760/2500x1000/1500 mm Reguliuojamos liniuotės rankenos Variklio galia: 4 kW Maitinimas: 380 V Bendri matmenys: Ilgis: 1500 mm Plotis: 2500 mm Aukštis: 1350 mm

Būklė: naudotas, Techniniai duomenys: Veleno skersmuo: 30 mm Veleno aukštis: 170 mm Apsisukimai: 3000/4500/6000/7000/10000 aps./min Rankinis veleno aukščio reguliavimas Veleno fiksatorius Darbo stalo matmenys: 720x2620 mm Reguliuojamos liniuotės svirtys Variklio galia: 5 kW Iajdpfezd Eu Ssx Alreu Maitinimas: 400 V Bendri matmenys: Ilgis: 1050 mm Plotis: 2620 mm Aukštis: 1850 mm

Būklė: naudotas, Techniniai duomenys: Veleno skersmuo: 30 mm Veleno aukštis: 130 mm Apsisukimai: 3000/6000/8000/10000 aps./min. Rankinis veleno aukščio reguliavimas Veleno fiksavimas Isdpfxozd Eufe Alrjau Darbo stalo matmenys: 1800x650 mm Reguliuojamos liniuotės rankos Variklio galia: 4 kW Maitinimas: 400 V Bendri matmenys: Ilgis: 650 mm Plotis: 1080 mm Aukštis: 1300 mm

Būklė: naudotas, Techniniai duomenys: Vikšro plotis: 220 mm Maksimalus pjovimo aukštis: 120 mm Maksimalus pjūklo disko skersmuo: 350 mm Sklandus padavimo reguliavimas Automatinė tepimo sistema Atgalinio smūgio apsauga Vartytuvas Ištraukimo antgalis: 180 mm Saugos jungiklis Maitinimas: 380 V Pagrindinio variklio galia: 18,5 kW Bendri matmenys: Ilgis: 1700 mm Plotis: 1600 mm Ijdpfx Aozd En Eolroau Aukštis: 1250 mm

Būklė: naudotas, Techniniai duomenys: Darbinis plotis: 900 mm 1 kalibravimo agregatas Isdezd Dcnopfx Alreau Veleno skersmuo: 140 mm 2 kalibravimo agregatas Veleno skersmuo: 140 mm Apdirbamo ruošinio aukštis: 160 mm Ištraukimo antgalio skersmuo: 2x160 mm Elektrinis pakėlimas Analoginis ekranas Avarinis jungiklis Pagrindinio variklio galia: 9,5 kW Įtampa: 380 V Bendri matmenys: Ilgis: 1500 mm Plotis: 1600 mm Aukštis: 1800 mm

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, Combined woodworking machine, 4-function, HOLZKRAFT CU 410c F 26 N Tersa -- Technical Data -- - Circular Saw - Cutting length: 2,600 mm Max. saw blade diameter: 315 mm Max. cutting height at 90° / 45°: 100 / 79 mm Iaedpfxjd Dtc Te Alrsu Max. crosscut width left of saw blade: 2,310 mm Cutting width at rip fence: 900 mm Saw blade tilting: 90° - 45° - Planer (Jointer) - Working width: 410 mm Planer table length: 1,660 mm Cutterblock diameter / number of knives: 72 mm / 3 pcs. - Thickness Planer - Table dimensions: 410 x 605 mm Min./max. working height: 3 / 230 mm Max. cutting depth: 4 mm Feed speed: 7 m/min - Spindle Moulder - Usable spindle length: 100 mm Max. tenoning cutter diameter: 275 mm Max. tool diameter: 210 mm Spindle speed: 3,500 / 6,000 / 10,000 rpm Spindle diameter: 30 mm - General - Motor power: 400 V / 50 Hz, 3 x 5.0 kW (6.6 HP) Extraction port diameter: 4 x 120 mm Extraction port diameter (saw blade guard): 60 mm - Special offer price - Location: Ex stock 54634 Bitburg

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, minimax c 26g TERSA – Multi-function Combination Machine for Sawing, Milling, Planing and Thicknessing. The work tables, made from heavily ribbed cast iron, and the welded steel frame ensure torsional rigidity and vibration-free operation. Unique in this performance class: smooth-running, anodised aluminium sliding table with ball contact system. Tilting saw blade from 90° to 45°. Table extension with aluminium crosscut fence for panels and large workpieces. Planer head with TERSA quick-change system with three planer knives. Helically geared steel feed roller ensures consistent workpiece infeed during thicknessing. Adjustable curve milling guard for profiling, standard with fine adjustment. Milling unit with two speeds. Three independent motors for each working unit. Quality made in Europe. Equipment Details Aluminium Sliding Table Proven ball contact system, used millions of times. Dust- and dirt-resistant due to minimal contact point between ball and guide rail. Permanently smooth operation. Saw Unit Adjustment Manual height and tilt adjustment of the saw assembly via star handle. Precise positioning using a scale. TERSA Planer Shaft No more adjustment or screwing needed. Planer knife changes in seconds. Self-locking. Extremely quiet operation. Spindle Moulder The milling unit offers two speeds for flexible use of tooling. The machine includes a finely adjustable curve milling guard for profiling. Tenoning operations can be performed effortlessly using the aluminium sliding table. Thickness Planer The powerful thickness feed allows planing of workpieces up to 200 mm high. The helical feed roller guarantees constant infeed. The jointer table folds space-savingly towards the inside of the machine. Conversion from surface planer to thickness planer takes only a second with a single movement. Surface Planer Standard with TERSA quick-change planing knife system. Large-dimensioned jointer tables. The tables, made of cast iron, ensure ultimate quiet running and freedom from vibration. Saw Unit Saw tiltable up to 45°. With 250 mm Ø saw blade, max. cutting height of 80 mm. The parallel fence enables cutting up to 500 mm width. Iododqzh Tjpfx Alrsau Table Extension With angle scale and aluminium crosscut fence for mitre cuts on panels and large workpieces. Scope of Delivery: TERSA quick-change planer cutterblock Anodised aluminium sliding table Mitre fence with flip stop Multi-purpose fence for parallel cuts and surface planing Eccentric hold-down clamp Model minimax c 26g TERSA Article No. 5500027 Ripping length 1200 mm Cutting width with parallel fence 500 mm Max. crosscut width left of saw blade 1200 mm Saw blade tilt 90 – 45 degrees Max. cutting height at 90° 80 mm Sliding table length 1140 mm Sliding table width 201 mm Sliding table height 70 mm Saw table length 1024 mm Saw table width 224 mm Saw table height 900 mm Planer shaft type TERSA Planer shaft diameter 62 mm Number of planer knives 3 pcs Jointer table width 260 mm Jointer table length 1040 mm Tilt angle of saw/jointer fence 90/45 degrees Maximum planing depth 3 mm Thickness table length 450 mm Thickness table width 260 mm Minimum working height 3 mm Location: In stock at 54634 Bitburg - Immediately available -

Būklė: naudotas, Techniniai duomenys: Darbinis plotis: 910 mm 1 šlifavimo agregatas Veleno skersmuo: 300 mm Apdirbamos medžiagos aukštis: 160 mm Iasdpfx Aey R Snbelrju Ištraukimo jungties skersmuo: 160 mm Elektrinis pakėlimas Analoginis aukščio indikatorius Pagrindinio variklio galia: 9 kW Įtampa: 380 V Bendri matmenys: Ilgis: 1800 mm Plotis: 1500 mm Aukštis: 2150 mm

Būklė: naudotas, Technical specifications: Track width: 400 mm Max cutting height: 150 mm Max saw blade diameter: 450 mm Min workpiece length: 700 mm Stepless feed rate adjustment Automatic lubrication system Anti-kickback protection Extraction port: 300 mm Emergency stop switch Power supply: 380 V Main motor power: 55 kW Overall dimensions: Length: 2000 mm Iaedpfeh Tkbkjx Alrsu Width: 2120 mm Height: 1860 mm

Būklė: naudotas, Gamybos metai: 1987, Naudota mašina Pagaminimo metai: 1987 Būklė: patikrinta servise Stovo išsikišimas: 750 mm Verpstės eiga: 100 mm Maksimalus atstumas tarp stalo ir verpstės: 310 mm Verpstės sūkių greitis: 10 000/20 000 aps./min. Variklio galia: 2,2/3,3 kW Įrankio tvirtinimas su tvirtinimo įvorėmis Su pūtimo įrenginiu, prijungimu prie suspausto oro Išoriniai matmenys: 905 x 1380 x 1600 mm Svoris: 533 kg Iasdpow I U Udjfx Alrju Prieinamumas: pagal susitarimą Vieta: Hochheim

Būklė: naudotas, Gamybos metai: 1998, mašinos/transporto priemonės numeris: AB/118120, TILTING SPINDLE MOULDER SCM MODEL T110I - CE - USED - Voltage: 400/50 - Serial no.: AB/118120 Ijdpowrfhkofx Alreau - Year: 1998

Būklė: naudotas, Gamybos metai: 1993, Funkcionalumas: visiškai funkcionalus, Kaeser SK 26 Iasdpfxjwn H Hye Alrou Rated power: 15 kW Permissible operating pressure: 10 bar Year of manufacture: 1993 Kaeser SM 8 Rated power: 5.5 kW Permissible operating pressure: 10 bar Year of manufacture: 1986 Kaeser Compressed Air Receiver Capacity: 500 L Permissible operating pressure: 11 bar Year of manufacture: 1992 OM Refrigeration Dryer Rated power: 0.8 kW Capacity: 3,000 l/min Permissible operating pressure: 16 bar Year of manufacture: 2013

Būklė: geras (naudotas), Contact via WhatsApp or excavator attachment from renowned German manufacturer RSP, in very good condition, ready for immediate use, low operating hours, and very well maintained. Iasdpsvkpl Ejfx Alrou

Būklė: naudotas, Techniniai duomenys: Klijuojamo elemento maks. matmenys: 1600 x 3000 mm 3 vertikalūs spaustuvai Isdpfx Aljyv Atreroau 2 horizontalūs spaustuvai Hidrauliniai spaustuvai Maitinimas: 400 V Variklio galia: 1,5 kW Variklio apsukos: 1450 aps./min Bendri išmatavimai: Ilgis: 1200 mm Plotis: 3500 mm Aukštis: 2500 mm

Būklė: geras (naudotas), Crane block, crane hook, load hook, single hook - Crane hook: load hook with adapter Iasdeu Richopfx Alrou - Load capacity: kg - Dimensions: see photos - Measurements: 490/160/H1090 mm - Dead weight: 81 kg

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2018, veikimo valandos: 16 187 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 14396, ašies variklio galia: 11 000 W, veleno greitis (min.): 8 000 aps./min, veleno skylė: 26 mm, bendras svoris: 7 000 kg, padavimo ilgis X ašis: 170 mm, padavimo eiga Y ašimi: 55 mm, padavimo ilgis Z ašis: 150 mm, X ašies padavimo greitis: 55 m/min, Y ašies padavimo greitis: 16 m/min, padavimo greitis Z ašis: 75 m/min, Strypo skersmuo (maks.): 28 mm, juostos ilgis: 3 000 mm, ašies skaičius: 8, Įranga: dokumentacija / vadovas, TORNOS MULTISWISS 8 x 26 mm. 2018 metų, su 16 000 darbo valandų. Staklės veikia puikiai. 8 nepriklausomos ašys, valdomos SIEMENS CNC. 3 ašys su Y judesiu. Strypų padaviklis iki 3 m ilgio strypams, iki 26 mm skersmens, 34 strypų (26 mm) talpa. Integruota KRAFT&BAUER CO₂ gesinimo sistema. Rūko ištraukimo sistema. Iodpfoy Txy Aox Alrjau

Būklė: naudotas, Gamybos metai: 2023, Exhibition machine Garbsen HORIZONTAL PANEL SAW GABBIANI P Manufacturer: SCM Model: GABBIANI P80 Year of manufacture: 2023 1.00 unit MAIN FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLES: AN INDISPENSABLE TOOL SIDE GUARDS: MORE WORKSPACE FLOATING GRIPPERS: GUARANTEE FOR PERFECT CUTTING TECHNICAL DATA GENERAL INFORMATION gabbiani p80 Saw blade projection mm: 80 Worktable height mm: 950 Standard number of grippers: 5 Number of grippers for versions 33/38/43: 9 / 10 / 10 Number of grippers for versions 33/38/43 with FlexCut 1 unit (single gripper with double finger included): 10 / 11 / 11 CUTTING DIMENSIONS Version 33 mm: 3300x2100 Version 33 (opt.) mm: 3300x3200 Version 38 mm: 3800x3200 Version 38 (opt.) mm: 3800x3800 Version 43 mm: 4300x3200 Version 43 (opt.) mm: 4300x4300 AXIS SPEEDS Variable saw carriage speed m/min: 6 – 60 Variable pusher speed m/min: 60 MAIN SAW BLADE Motor power (S6 - 40%) - 50Hz (star-delta start) kW (HP): 7 (9) (11) Speed – 50 Hz rpm: 4650 Saw blade diameter mm: 340 Main saw blade spindle diameter mm: 80 SCORING SAW Motor power (S6 - 40%) - 50Hz kW (HP): 1.5 (2) Speed – 50 Hz rpm: 5850 Scoring saw diameter mm: 200 Scoring saw blade spindle diameter mm: 80 INSTALLATION Installed power kW: 12÷15 Base machine voltage Euro voltage (400 V / 50 Hz) Compressed air demand NL/min: 300 Required compressed air pressure bar: 7 Extraction air requirement m³/h: 2440 Extraction air speed m/sec: 20 Extraction connection diameter mm: 4x120 Note: In countries where EC standards apply, the forward feed speed of the pusher is limited to 25 m/min. GENERAL FEATURES Automatically controlled horizontal panel sizing saw with PC/PLC control, for dividing panels of solid wood, MDF, chipboard, plywood, and similar materials. Machine frame and worktable - Machine frame constructed as a steel tube design - Worktable made of ribbed, reinforced steel with bakelite coating - Longitudinal fence on the left side Saw carriage made of steel, consisting of: - One motor for the main saw blade and one motor for the scoring blade - Vertical lift of the saw blade on linear ball guides and shoes - Running rollers made of hardened and ground steel - Balanced mass distribution to ensure the highest cutting quality - Running direction against the longitudinal fence - Saw carriage drive via rack and pinion - Carriage runs on cylindrical guides - Cylindrical guides made of hardened and ground steel (5-year warranty), protected by special dust wipers - Pneumatic switch for quick and safe change of the main saw blade and scorer Pressure beam - Pressure beam with uniform pressure on the workpiece along the entire cutting length with recesses to prevent collisions with the grippers; pneumatic height adjustment via high-precision rack and pinion, pressure adjustable from 1.5 to 6 bar - Dual extraction system with a unit above the pressure beam for cleaning the worktable and a unit below on the saw carriage - Lateral automatic aligner with pneumatic cylinder over the entire length. Slides on linear ball guides and shoes. * Travel: 1200 mm * Minimum working width: 60 mm * Maximum working width: 1200 mm Position pusher and rear section of the machine - Position pusher over the entire length, motor-driven via robust shaft. Ijdpex Twcvsfx Alreau

Būklė: labai geros būklės (naudotas), Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, obliavimo aukštis: 210 mm, ašies skersmuo: 30 mm, obliavimo plotis: 260 mm, darbinio aukščio: 210 mm, bendras plotis: 2 350 mm, bendras aukštis: 900 mm, bendras ilgis: 1 250 mm, drožlių pašalinimas: 100 mm, SCM MiniMax C260E 5-in-1 Multi-Function Machine Specification: Iaedpfx Aljx Rb Hterju • Technical condition – after inspection, machine ready for operation • Manufacturer – SCM • Model – MiniMax C 260 E • Planer working width – 260 mm • Thicknesser working height – 210 mm • Planer table length – 1250 mm • Motors: 3 x 1.5 kW • Single-phase machine (230V) – conversion to 3-phase possible for an additional 2000 PLN • Motor brakes • 3-knife cutter block for conventional knives • Noise-reducing combs • Manual up/down adjustment • Thicknesser cutterblock speed – 4200 rpm • Spindle moulder spindle – 30 mm • Max saw blade diameter – 250 mm • Circular saw spindle – 30 mm • Max saw blade diameter – 250 mm • Sliding table length – 90 cm • Original paintwork • Complete set of safety mushroom buttons • Dust extraction ports – 100 mm • Weight approx. 300 kg • Year of manufacture – 1998 • Overall dimensions 120 x 235 x 90 cm (L x W x H) Additional information: • The photos shown represent the actual condition of the item for sale • Possibility to run and inspect the machine on site

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, SCM GABBIANI P80 – Automatinė CNC staklių sija pjovimo staklė Gamintojas / modelis: SCM Gabbiani P80 Pagaminimo metai: 2022 Vieta: Kroatija Būklė: Puikiai veikianti, šiuo metu eksploatuojama gamyboje Techninės specifikacijos: * Plokščių matmenys: 3300 × 3200 mm * Pagrindinis pjūklo variklis: 11 kW (15 AG), diskas Ø 340 mm * Įpjovimo įtaisas: 1,3 kW, diskas Ø 200 mm * Maksimalus pjovimo aukštis: 80 mm * Pjūklo vežimo greitis: 6–60 m/min * Stūmiklio greitis: iki 60 m/min * Įdiegta galia: 12–15 kW * Suslėgto oro sąnaudos: 300 NL/min Iaodpfx Aswtgdislrou * Dulkių ištraukimas: 4 × Ø120 mm jungtys, bendras našumas 2190 m³/h Įranga: * Maestro Active Cut valdymo sistema (PC/PLC) * eye-M operatoriaus pultas * Maestro Ottimo Cut optimizavimo programinė įranga * Lipdukų spausdintuvas * Nuotolinės priežiūros modulis Staklės puikios būklės, galima apžiūrėti veikiančias prijungtas prie elektros tinklo. Parduodamos dėl gamybos pertvarkymo ir naujos automatizuotos SCM Flexstore sistemos diegimo. Papildomos nuotraukos, vaizdo įrašai ir techninė informacija pateikiama paprašius.

Būklė: naudotas, Gamybos metai: 2008, mašinos/transporto priemonės numeris: AH005185, Funkcionalumas: visiškai funkcionalus, ruošinio aukštis (maks.): 60 mm, briaunos storis (maks.): 20 mm, pavaros tipas: pneumatinis, bendras svoris: 5 500 kg, Įranga: CE žymėjimas, Parduodama labai gerai išlaikyta briaunų klijavimo staklė STEFANI SOLUTION 8000 Pagaminimo metai: 2008 Staklių ilgis: 11 000 mm Iajdezdlabopfx Alreu Briaunos juostos storis: 0,5–16 mm Ruošinio storis: 10–60 mm Minimalus ruošinio plotis: 260 mm Maksimali greitis: 25 m/min (be pjūklų naudojimo) Agregatai: -Skyriklio tepimo įtaisas -Išankstinis frezavimas -Klijavimo blokas -Pjūklai -Apvalinimo įrenginiai (rondomatai) -Cikliniai įrenginiai -Šepečiai -Pjūklas griovelių darymui plokštumoje ir briaunoje Staklės veikia. Dėl papildomos informacijos skambinkite.

Būklė: naudotas, Gamybos metai: 2011, Base Machine M800 X5 TV 1 WORKING AREA X: 5,020mm Y: 1,830mm Z: 675mm Clearance Height: 300mm (starting from 50mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic design made from thick-walled steel. It is reinforced with welded-in parts across the entire machine bed, providing extreme stability. The table design, with a large base, is the key to ensuring lasting precision and stability. The machine layout allows users to maintain an optimal workflow while requiring minimal floor space. The movable gantry beam is built from a solid monoblock. It is positioned along the X-axis on prismatic, ground guides using recirculating ball carriages. On this mobile unit carrier, the working unit is also mounted on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axis movements take place on prism linear guides with large cross-sections and recirculating ball shoes with large contact areas, ensuring optimal sliding even at maximum speeds and accelerations. Precise and rapid positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large-diameter recirculating ball screws guarantee accurate positioning of the working unit along the movable gantry (Y and Z axes). Perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality actuators and brushless motors. Maximum axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety Device with Bumper and Light Curtain 1 Bumpers with sensors are installed around the movable stand, and a light curtain system is mounted in front of the machine. If the operator enters the active zone, the X-axis speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows workpieces to be loaded during pendulum operation without the access restrictions of floor mat systems. It prevents unwanted interruptions of the machining cycle and gives greater freedom of movement around the worktable. CE Certification for the Safety System 1 Safety protection fence 1 Protective fencing at the sides and rear Automatic Central Lubrication controlled by CNC 1 Lubrication of the X, Y, and Z axes is managed by CNC control at regular intervals, eliminating manual intervention at the machine. Central Extraction Connection 1 All individual extraction ports of the processing units are combined into a central extraction nozzle. Various slide gates inside the nozzle are controlled by the NC unit, reducing the required extraction air flow. Chip Conveyor 1 Maxi - 5-axis Electrospindle 11 kW HSK-63 "Prisma K 1" 5-axis electrospindle with 11 kW output at 20,000 rpm in S1 (100% duty cycle) Speed: max. 20,000 rpm Left/right rotation Liquid cooling Tool interface: HSK 63F 18 kW Inverter provides stepless, even power delivery Max. rotation: Iajdpfexy Tmnjx Alreu B-axis = 200° (±100°) C-axis = 650° Thanks to non-orthogonal axes, it is possible to perform complex horizontal positioning within a small working area. This enables the machining of complex geometries without collision risk.

Būklė: naudotas, Gamybos metai: 2015, bendras aukštis: 1 850 mm, bendras ilgis: 2 300 mm, bendras plotis: 1 950 mm, Color: White Unladen weight: 1,240 kg - Year of manufacture: 2015 - Documentation available: No - CE marking present: Yes - CE certificate available: No - Serial number: AB/222595 - Main motor power [kW]: 2.2 Isdpfx Aszavvgolroau - Number of controlled axes [pcs.]: 12 - Working area X [mm]: 3050 - Working area Y [mm]: 800 - Working area Z [mm]: 60 - X-axis maximum travel [mm]: 1040 - Y-axis maximum travel [mm]: 1030 - Z-axis maximum travel [mm]: 100 - Number of milling spindles [pcs.]: 8 - Spindle diameter [mm]: 10 - Min. spindle speed [rpm]: 1000 - Max. spindle speed [rpm]: 4000 - Horizontal drilling machine: Yes - Horizontal drilling spindles [pcs.]: 6 - Max. drilling depth [mm]: 18 - Vertical drilling machine: Yes - Vertical drilling spindles [pcs.]: 8 - Max. drilling depth [mm]: 30 - Saw unit present: Yes - Safety device: - Voltage [V]: 400 - Power consumption [A]: 10 - Transport dimensions: 2300mm x 1950mm x 1850mm (l x w x h) - Transport weight [kg]: 1240kg - Number of transport packages [pcs.]: 1 Financial Information VAT: The stated price is plus VAT VAT/margin taxation: VAT deductible for businesses Delivery and trade-in possible at any time for all items from the industrial sector Glenn Smeets

Būklė: naudotas, Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, įrankių magazino lizdų skaičius: 7, ašies variklio galia: 6 600 W, 3-Achs-Maschine Vakuumpumpe 100 m³ Elektrospindel mit 6,6 kW Motorleistung Fräsaggregat + Sägeaggregat Bohraggregat 10 + 4 (10 vertikal + 4 horizontal) ISO 30 Frässpannzange Manuelle Schmierung 15" Monitor Iedpfx Alewhvwnsrjau XILOG PLUS Software Windows XP Die Maschine ist beim Verkäufer noch in Betrieb, Video der Maschine im Arbeitsmodus auf Anfrage verfügbar.

Būklė: naudotas, Gamybos metai: 1999, Sliding table length: 3800 mm Cutting width at rip fence: 1500 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 140 mm Scoring unit: no Saw blade height adjustment: electric Iodpovxi Ddefx Alroau Saw blade tilt adjustment: electric Rip fence adjustment: electric / position control Saw blade angle display: digital Cutting height display: - Rip fence display: digital Crosscut fence display: scale Saw blade diameter: 400 mm Speeds: 3 Motor power: 7.5 kW Motor brake: yes, automatic Extraction port: 80 mm and 120 mm Machine length: 3900 mm Machine width: 2200 mm Weight: 1000 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2000, I am selling the SCM Multiflex window fabrication corner jointing machine. Equipped with VIVALDI EU68mm milling heads. Tenoning unit and mortising spindle on the right (tenoning side). Two profiling spindles and glazing bead cutting saw on the left (profiling side). Available immediately. Isdpehw Dfysfx Alrjau