Scm Morbidelli M 100 (3-Achs) pirkti naudotą (114 418)

Būklė: naudotas, Gamybos metai: 2019, including tools: CNC-CONTROLLED MACHINING CENTER morbidelli m100 - Drilling and Milling Made for You! This numerically controlled machining center comes equipped with an extensive range of tools for milling and drilling, designed to meet any woodworking requirement. - High Performance: Equipped with drilling spindles operating at 8,000 rpm and the most robust spindle technology available on the market, offering over 1,000 maintenance-free operating hours. - Fully and Optimally Equipped: Suction cups can be individually configured on the TV FLEX worktable, allowing the machine to be customized precisely to your needs. - Easy and intuitive programming thanks to the integrated Maestro CAD-CAM CNC software. - User-Friendly Operation: The lowered machine frame ensures the worktable is always accessible. The control cabinet and vacuum pump are integrated into the machine bed, and in the PRO SPACE version, no additional safety enclosures are required. Supporting Structure: The support structure consists of an exceptionally strong monolithic steel base, heavily ribbed and highly robust. The particularly wide support surface was specially designed to ensure machine stability, providing consistent precision under all working conditions. No floor anchoring is required. The base forms a large and solid support for the moving gantry: the working unit is equipped with a balanced, stable, and resilient support that withstands even the highest loads, ensuring superior quality performance and greater accuracy. The moving gantry is made from a solid single piece, anchored to the base and running on high-quality prismatic guides with recirculating ball-bearing carriages. The working unit is attached to this and moves along the Y and Z axes, also on prismatic guides with recirculating ball-bearing carriages. Movement of the lower moving unit (X-axis) and the working unit along the traverse of the moving unit (Y-axis) is achieved via a helical rack-and-pinion drive. This provides higher tooth-to-tooth power transfer for greater acceleration and increased speed along the X and Y axes. The specially designed helical gearing results in less wear of mechanical components and significantly quieter operation. The vertical Z-axis is powered by a ball screw, ensuring perfect balance under dynamic load, enabling high acceleration and deceleration. The main milling unit is directly mounted to the Z-axis carriage, providing extremely fine finishing quality by fully eliminating vibrations. Iedpfevvi Scsx Aauetf Movement along the X-Y-Z axes is performed by brushless motors driven by static inverters, ensuring: - Reduced processing times thanks to improved acceleration - Greater positioning accuracy due to high-resolution encoders - No need for setup procedures upon machine start-up due to absolute encoders - No routine maintenance because the brushless system eliminates brushes The machine’s axis movements and general device management are controlled via e

Būklė: naudotas, Gamybos metai: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTION TABLE – WORK CELL VERSION X400 CELL Drilling and milling made for you! The numerically controlled machining center is equipped with a comprehensive range of milling and drilling tools to meet any requirement in the processing of wood and similar materials. - Powerful drilling spindles with 8,000 rpm and proprietary technology, featuring the most robust spindle available on the market, with over 1,000 maintenance-free operating hours - Better equipped, with a wide range of configuration options via the multifunction table to optimally adapt the machine to specific requirements - Easier and more intuitive programming with the integrated Cad-Cam module MAESTRO CNC - User-friendly operation: the worktable is always accessible, the control cabinet and vacuum pump are integrated, and with the PRO SPACE configuration, there are no safety barriers Structural Frame The structural frame is composed of a particularly robust monolithic steel base, highly ribbed and extremely rigid; the exceptionally wide support surface has been specially designed to give the machine enhanced stability, ensuring lasting precision regardless of working conditions and eliminating the need for anchoring to the floor. The base provides a large and solid support for the moving gantry: the work unit is thus furnished with a balanced, stable, and resilient structure which withstands the highest loads, delivering superior performance and greater accuracy. The moving gantry is formed from a single robust component that is anchored to the base on both sides and glides on high-quality prismatic guides with recirculating ball carriages. Dual drives along the X-axis ensure maximum performance even under intensive workloads. Movement of the lower moving unit (X-axis) and the working unit along the beam of the moving unit (Y-axis) is accomplished via a helical rack and pinion drive; this provides greater tooth-to-tooth force, resulting in increased acceleration and higher speeds along both the X and Y axes. The specially designed helical gearing reduces mechanical wear and ensures quieter operation. The vertical Z-axis is driven by a ball screw, ensuring perfect balance under dynamic loading and rapid acceleration/deceleration. The main milling unit is directly coupled to the carriage of the Z-axis, ensuring absolute finishing quality by completely eliminating vibration. Motion along each axis (X-Y-Z) is achieved using brushless motors powered by static inverters, providing: - Reduced processing times thanks to improved acceleration Ijdpovvi N Iofx Aauetf - Increased positioning accuracy with high-resolution encoders - Automatic zero-point referencing when the machine is powered on due to absolute encoders - Elimination of general maintenance associated with brushes, as the brushless system is maintenance-free Axis movement management and overall machine function control is performed via an industrial NS module with digital D

Būklė: naujas, keliamoji galia: 1 000 kg, Įranga: kojinis nuotolinio valdymo pultas, 1000 kg keliamoji galia, pilnas komplektas, įskaitant rankinį ir dvigubą pėdinį nuotolinio valdymo pultą (nuo 600 kg iki 10 000 kg galimi variantai) 3 ašių reguliuojamo aukščio suvirinimo sukamasis stalas Itedpfxsx Th A Hj Aaujf su 200 mm praeinamuoju gręžiniu Plokštės skersmuo 900 mm su T formos grioveliais, alternatyvai masyvi skylėta plokštė 2000 x 1000 x 200 mm, storis 20 mm, skylės žingsnis 100 mm, skylės skersmuo 28 mm Aukštis horizontalioje padėtyje min. 0,65 m, maks. 1,25 m Aukštis palenktame režime min. 0,45 m, maks. 0,95 m Sukimosi greitis nuo 0,01 iki 1,1 aps./min Posvyrio kampas iki 135° Rankinis ir dvigubas pėdinis valdymas su greičio indikacija Labai tvirta konstrukcija Kaina be priedų, priedai už labai palankią priemoką Stalviršio priemoka 1900 € (tik kartu su pozicionieriumi)

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, keliamoji galia: 1 000 kg, 1000 kg load capacity complete set incl. hand and dual foot remote control. 3-axis welding turntable, height adjustable with 200 mm through-hole Table diameter 900 mm with T-slots, alternatively available with solid bolted perforated plate 2000 x 1000 x 200 mm, thickness 20 mm, hole grid 100 mm, diameter 28 mm Horizontal height min. 0.65 m, max. 1.25 m Tilted height min. 0.45 m, max. 0.95 m Speed range: 0.01 – 1.1 rpm Tilting angle up to 135° Iodovllhrspfx Aauetf Hand and dual foot remote control with speed display Very robust design Price excludes accessories; accessories available at very competitive additional cost. Tabletop surcharge €1,900 (only available in combination with positioner).

Būklė: naudotas, Gamybos metai: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS PROCESSING UNIT "PRISMA": TOP-LEVEL QUALITY AND PRODUCTIVITY SOFTWARE XILOG MAESTRO: EXTREMELY EASY PROGRAMMING "MATIC" WORKTABLE: SINGLE POSITIONING FOR MULTIPLE OPERATIONS TECHNICAL DATA AUTHORM400 AXES Working area X-axis (reference side): 3,680 mm Working area Y-axis (max. loadable workpiece at rear stops): 1,680 mm Workpiece passage Z / Number of Z axes: 170 mm / 1 Workpiece length for pendulum operation: 1,650 mm Travel speed X-Y axes Pro-Speed: 85 m/min Z-axis speed: 30 m/min INSTALLATION Installed power: 62–82 KVA Compressed air requirement: 400 NL/min Extraction air requirement: 4,430 m³/h Itjdpfey Dta Sox Aausf Extraction air velocity: 25 m/s Extraction port diameter: 250 mm GENERAL FEATURES CNC-controlled drilling and milling center in gantry design with worktable and workpiece supports suitable for: - Vertical drilling on panel surfaces - Horizontal drilling on all four workpiece edges - Grooving with disc cutter - General milling operations (3-4-5 axes) MACHINE STRUCTURE The base structure is a monolithic construction made of thick-walled steel, reinforced throughout the entire machine bed for extreme rigidity and stability through welded-in reinforcements. The table design with a large base is the key to ensuring permanent precision and stability. The machine layout offers the operator an optimal workflow with a minimal footprint. The moving gantry is built from a solid monoblock and is guided on prism-ground rails with ball-bearing carriages in the X-axis. The mobile unit carries the operating unit, which is also mounted on prism-ground rails and ball-bearing guides. AXIS MOVEMENT All axes move on large-cross-section linear prism guides with wide-bearing ball-bearing shoes to ensure optimal gliding even at the highest speeds and accelerations. The precise and fast positioning of the moving gantry (X-axis) is achieved via rack and pinion with helical teeth. Large-diameter ball screws ensure accurate positioning of the working unit along the moving gantry (Y and Z axes). MOTORS, DRIVES, AND INVERTERS Perfect mechanical dynamics and maximum positioning accuracy are achieved with high-quality drives and brushless motors, sized for speeds up to 90 m/min, ensuring the best possible surface finish. CONTROL SYSTEM The control unit consists of a numerical controller for milling and drilling with "Xilog Maestro" graphic interface on a Windows 7-based Office operating system: - 17" color LCD screen - QWERTY keyboard - Swiveling operator panel - Machine operation interface with Xilog Maestro software Xilog Maestro Features: Programming - Parametric graphical programming - Import of DXF files (2D; geometries like "SPLINE", "POLYLINE 3D", straight or circular interpolation in three axes, linear in space, spiral in the chosen plane) - Supported programming with graphical and syntax aids for drilling and milling operations - Automatic optimization of drilling operations and tool change cycles - Option to shift panel zero-point for drilling on slanted or curved panel edges

Būklė: naudotas, Gamybos metai: 2023, Ex demo machine Garbsen CNC-CONTROLLED MACHINING CENTER Morbidelli m100 Drilling and milling made for you! This numerically controlled machining center is equipped with an extensive range of tools for milling and drilling to handle any requirement in the woodworking sector. Highly efficient – features drilling spindles with 8,000 rpm and the most robust spindle technology available on the market, offering more than 1,000 maintenance-free hours. Fully and extensively equipped – the vacuum pods can be individually configured via the TV FLEX worktable, allowing the machine to be adapted flexibly to your needs. User-friendly and intuitive programming thanks to integrated MAESTRO CAD-CAM CNC software. Easy to operate: the lowered machine base ensures the worktable is always accessible. The control cabinet and vacuum pump are integrated into the machine bed, and the PRO SPACE version requires no additional structural safety measures. Supporting structure The main frame consists of an exceptionally strong, monolithic steel base, heavily ribbed and extremely robust. Its especially wide support surface is specifically designed to provide the machine with outstanding stability, ensuring continuous precision under all working conditions. There is no need for the machine to be anchored to the floor. The base forms a large, solid foundation for the moving gantry: the operating unit is equipped with a balanced, stable and resistant support that withstands the highest loads, ensuring superior quality and greater accuracy. The moving gantry consists of a single solid piece bolted to the base and moves along prismatic guides with recirculating ball carriages of the highest quality. The machining unit is mounted on it and also moves along the Y and Z axes on prismatic guides with recirculating ball carriages. The movement of the lower moving unit (X-axis) and the machining unit along the traverse of the moving unit (Y-axis) is driven by a helical rack and pinion drive; this provides greater tooth-on-tooth thrust for higher acceleration and increased speed along the X and Y axes. The specially designed helical gearing ensures reduced wear on mechanical components and quieter operation. The vertical Z-axis is driven by a ball screw, delivering perfect balance under dynamic loads, and withstanding high acceleration and deceleration. The main milling unit is directly coupled with the Z-axis carriage, allowing for very high quality finishing with practically zero vibration. X-Y-Z axis movement is handled by brushless motors driven by static inverters. These provide: - Reduced cycle times thanks to improved acceleration - Improved positioning accuracy thanks to high-resolution encoders - Elimination of set-up operations when powering on the machine thanks to absolute encoders - No general maintenance on the drive system as the brushless system uses no brushes. The management of axis movement and general machine operations... Itsdpjytrgzsfx Aauef

Būklė: naudotas, Gamybos metai: 2011, Base Machine M800 X5 TV 1 WORKING AREA X: 5,020mm Y: 1,830mm Z: 675mm Clearance Height: 300mm (starting from 50mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic design made from thick-walled steel. It is reinforced with welded-in parts across the entire machine bed, providing extreme stability. The table design, with a large base, is the key to ensuring lasting precision and stability. The machine layout allows users to maintain an optimal workflow while requiring minimal floor space. The movable gantry beam is built from a solid monoblock. It is positioned along the X-axis on prismatic, ground guides using recirculating ball carriages. On this mobile unit carrier, the working unit is also mounted on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axis movements take place on prism linear guides with large cross-sections and recirculating ball shoes with large contact areas, ensuring optimal sliding even at maximum speeds and accelerations. Precise and rapid positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large-diameter recirculating ball screws guarantee accurate positioning of the working unit along the movable gantry (Y and Z axes). Perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality actuators and brushless motors. Maximum axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety Device with Bumper and Light Curtain 1 Itedpexy Tmnofx Aausf Bumpers with sensors are installed around the movable stand, and a light curtain system is mounted in front of the machine. If the operator enters the active zone, the X-axis speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows workpieces to be loaded during pendulum operation without the access restrictions of floor mat systems. It prevents unwanted interruptions of the machining cycle and gives greater freedom of movement around the worktable. CE Certification for the Safety System 1 Safety protection fence 1 Protective fencing at the sides and rear Automatic Central Lubrication controlled by CNC 1 Lubrication of the X, Y, and Z axes is managed by CNC control at regular intervals, eliminating manual intervention at the machine. Central Extraction Connection 1 All individual extraction ports of the processing units are combined into a central extraction nozzle. Various slide gates inside the nozzle are controlled by the NC unit, reducing the required extraction air flow. Chip Conveyor 1 Maxi - 5-axis Electrospindle 11 kW HSK-63 "Prisma K 1" 5-axis electrospindle with 11 kW output at 20,000 rpm in S1 (100% duty cycle) Speed: max. 20,000 rpm Left/right rotation Liquid cooling Tool interface: HSK 63F 18 kW Inverter provides stepless, even power delivery Max. rotation: B-axis = 200° (±100°) C-axis = 650° Thanks to non-orthogonal axes, it is possible to perform complex horizontal positioning within a small working area. This enables the machining of complex geometries without collision risk.

Būklė: naudotas, Gamybos metai: 2018, bendras aukštis: 2 300 mm, bendras ilgis: 3 870 mm, bendras plotis: 1 900 mm, Unladen weight: 2,500 kg - Year of manufacture: 2018 Itjdpfjxrdngsx Aausf - Documentation available: Yes - CE marking present: Yes - CE certificate available: Yes - Serial number: AH/121500 - Number of milling spindles [pcs]: 12 - Type of milling table: Flat table - Drilling tool included: Yes - Saw unit included: Yes - Tool changer positions [pcs]: 8 - Safety feature: Bumper - Tools included: Yes - Table length [mm]: 2,570 - Table width [mm]: 1,290 - Working area X [mm]: 2,486 - Working area Y [mm]: 1,255 - Z-axis working area [mm]: 150 - X-axis maximum stroke [mm]: 3,120 - Y-axis maximum stroke [mm]: 1,685 - Z-axis maximum stroke [mm]: 250 - Transport dimensions: 3,870 mm x 1,900 mm x 2,300 mm (L x W x H) - Transport weight [kg]: 2,500 kg - Number of transport packages [pcs]: 1 Financial Information VAT: The stated price is exclusive of VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for any item from the industrial sector Glenn Smeets

Būklė: labai geros būklės (naudotas), Gamybos metai: 2020, veikimo valandos: 8 879 h, X ašies eiga: 3 110 mm, Y ašies eiga: 1 320 mm, Z ašies eigos atstumas: 180 mm, Siūlome labai gerą SCM Morbidelli m100 apdirbimo centrą, pagamintą 2020 metais. Iodpeyc Ttnsfx Aaustf Jei turite klausimų arba reikia daugiau informacijos, drąsiai rašykite mums žinutę arba skambinkite.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, 5 ašių elektrovairuoklis Grąžtai vertikaliam gręžimui: 13 Grąžtai horizontaliam gręžimui X: 6 Grąžtai horizontaliam gręžimui Y: 4 13 pozicijų linijinis įrankių keitiklis 11 pozicijų išorinis įrankių keitiklis 1 vakuuminis siurblys Programinė įranga: Maestro Itedpfxoy A Sxwj Aauef Svoris apie 4100 kg.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2019, veikimo valandos: 1 500 h, Šis 5 ašių SCM Morbidelli M100 buvo pagamintas 2019 m. Jame yra didelis 3110 × 1620 mm darbinis plotas, 21 vertikalus ir 12 horizontalių velenų, o didžiausias sukimosi greitis - 8 000 aps/min. Staklėse yra vakuuminiai siurbtukai, jos naudotos maždaug 1500 valandų. Apsvarstykite galimybę įsigyti šį SCM Morbidelli M100 CNC medienos apdirbimo centrą. Susisiekite su mumis ir gaukite daugiau informacijos apie šias stakles. Iedpfxeyab Axs Aauetf • Mašinos būklė: Puikus, labai mažai naudotas • Konfigūracija: Įranga: 5 ašių CNC apdirbimo centras • Darbo plotas (X × Y): 3110 × 1620 mm • Vertikalūs velenai: 21 • Horizontalūs verpstės: 12 • Didžiausias sukimosi greitis: 8000 aps/min. • Vakuuminė sistema: Su vakuuminiais siurbtukais

Būklė: labai geros būklės (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, SCM Morbidelli N100 CELL Darbo zona X: 4 286 mm Darbo zona Y: 2 185 mm Darbo zona Z: 150 mm Vertikalios gręžimo galvos: 12 Horizontalios X krypties grąžtai: 4 Horizontalios Y krypties grąžtai: 2 1 griovelio pjūklas X kryptyje Įrankių keitiklis: 20 vietų Brūkšninių kodų skaitytuvas 3 vakuuminiai siurbliai Itjdox Tgubepfx Aauef SCM eye-M valdymas Gera būklė

Būklė: naudotas, Face plate diameter: 4,770 mm Swing diameter: 10,000 mm Turning height: 3,500 mm Table load: 100 t Rotational speed: 40 rpm Table drive: 125 kW Control: Siemens Type: 840 D Support: 1 Support travel: 1,421 mm Ram dimensions: 250 x 250 mm Tilt: +/-30° Driven tools: 16 kW Spindle taper: ISO 50 Spindle speeds: 3,000 rpm Total power requirement: 150 kW Overhauled: 2003 Table extension up to 8,000 mm The technical data are manufacturer or operator specifications and therefore non-binding for us. Interim sale reserved; exclusively our terms and conditions apply. About us: - Over 400 own machines in stock Isdoyrhufepfx Aauotf - More than 15,000 m² warehouse space, crane capacity 70 t - Over 10,000 accessory items for your workshop If you are looking to sell machines, production lines, or your business, please contact us. Further offers can be found on our website. Viewings are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Būklė: labai geros būklės (naudotas), track width 300 mm minimum workpiece length 390 mm minimum workpiece width 12 mm minimum workpiece height 8 mm maximum workpiece width 950 mm blade diameter 350 mm blade bore diameter 70 mm spindle speed 4200 rpm main motor power 35 HP variable feed speed adjustment 6–48 m/min table dimensions 1530x1100 mm Itedpfx Aaswndqieuef machine weight 1800 kg year of manufacture 2008 CE certificate

Būklė: labai geros būklės (naudotas), Main motor 25 kW Isdpfx Aeqwg Iaoauotf

Būklė: labai geros būklės (naudotas), Multisaw SCM M3 - Width: 300 mm - Cutting height: 120 mm - Motor power: 37 kW - Weight: 1800 kg - Year of manufacture: 2003 - Maximum element width: 100 cm Itsdpfxsi Ewnao Aauof - Minimum element length: 40 cm - Infinitely variable feed speed adjustment - Three-row anti-kickback fingers - Spindle diameter: 50 mm - Sleeve diameter: 70 mm - Sleeve equipped with spacers and 5 saw blades, 350 mm - Blade diameter: 200 to 350 mm - Automatic centering lubrication - Four upper pressure rollers - One set of keys Machine and chain band in very good condition.

Būklė: naujas, Gamybos metai: 2025, Spindle Moulder minimax twf 55 es M 3 UP Professional trade machine featuring motorised height and tilt adjustment of the spindle, four speeds, and electronic control Article number 5502266 Brand Holzkraft / SCM EQUIPMENT Features Aluminium sliding carriage ✔ Handle on sliding carriage ✔ Fencing system FLEX ONE: heavy-duty professional version, automatic adjustment of the entire fence based on tool diameter, manual depth of cut adjustment, swing-away mechanism, aluminium fence jaws with connecting rails Spindle height adjustment motorised Telescopic mitre fence with two fold-away stops Spindle tilt adjustment motorised Extension table ✔ Control system Ready 3: programmed movement of the spindle unit on two axes, automatic adjustment of the entire fence according to tool diameter, stepless adjustment via switch or automatic positioning system Curved workpiece safety guard ✔ Position of control elements Operator panel at eye level, swivelling Excenter clamp TECHNICAL DATA Dimensions and Weight Length (product) approx. 1200 mm Net weight approx. 510 kg Width/Depth (product) approx. 2000 mm Extraction Connection Extraction port diameter 2 x 120 mm Working Table Working table length 1200 mm Sliding carriage length 1200 mm Working table width 530 mm Sliding carriage width 360 mm Table height 900 mm Sliding carriage height 142 mm Installation Information Space requirement length 2800 mm Machine body width/depth 846 mm Space requirement width/depth 2910 mm Working area length 1600 mm Space requirement explanation Dimensions include maximum traverse paths or usable lengths. Working area width/depth 2300 mm Itsdpfx Ajhp Rc Ieaujf Machine body length 1200 mm Working area explanation Add the stated dimensions to the required space to get the recommended free installation area for the machine. Electrical Data Connection voltage 400V Drive motor power 5.0 kW Mains frequency 50 Hz Spindle Spindle tilt 0 to -45° Spindle speed display On control panel display Spindle usable length 125 mm Spindle shaft diameter 30 mm Spindle rotation speeds 3500/6000/8000/10000 rpm Maximum Cutter Diameters Max. cutter diameter 240 mm Max. profile mill diameter 240 mm Max. retractable cutter diameter 230 mm

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2019, mašinos/transporto priemonės numeris: AA100001570, Funkcionalumas: visiškai funkcionalus, Z ašies eigos atstumas: 180 mm, stalo ilgis: 5 510 mm, stalo plotis: 1 620 mm, greitas poslinkis X ašimi: 56 m/min, greitas poslinkis Y ašis: 56 m/min, TECHNICAL DETAILS Worktable dimensions (L x W): 5,510 x 1,620 mm Z-axis travel: 180 mm Maximum vector rapid traverse speed, X/Y-axis: 56 m/min Spindle speed: 4,000 rpm Tool changer positions: 44 Connection diameter: 250 mm MACHINE DETAILS Dimensions & Weight Dimensions: 9,700 x 5,020 x 2,650 mm (LxWxH) Net weight: 5,000 kg Spindle motor power: 5.5 kW Itedpfx Aajxmgr Rsuef Air consumption: 4,430 m³/h Air velocity: 25 m/s Voltage: 400 V / 50 Hz EQUIPMENT PRO-Speed safety system TEPCAD control panel with touchscreen color display Linear tool changer TBR14 Linear tool changer FAST14 Air blower on electrospindle Protection grating for X and Y axes Vacuum pump 150/300 m³/h 5-axis aggregate 'JQX' version 13.5 kW Fixed base: 145 x 145 H=75 mm Swiveling gondola: 145 x 55 H=75 mm Clamp for 8 rails TV FLEX / TV FLEXDRIVE / TV FLEXMATIC MULTIGRIP 90 round clamp (H83) for TV FLEX / TV FLEXMATIC Maestro connect 1 year (including gateway kit plug & play) SCM DIGITAL SOLUTIONS: MAESTRO CONNECT MAESTRO ACTIVE software for human-machine interface (HMI) Maestro software for CNC programming Hardware dongle for Maestro CNC Advanced Maestro 3D module Additional Maestro CNC key (USB interface) Windows 10 embedded 64-bit operating system Console with integrated PC eye-M PRO

Būklė: naujas, tuščias svoris: 6 890 kg, didžiausias leistinas svoris: 23 110 kg, bendras svoris: 30 000 kg, ašių konfigūracija: 3 ašys, krovimo vietos ilgis: 9 200 mm, krovinių skyriaus plotis: 2 550 mm, pakaba: oras, padangos dydis: 235/75 R 17,5, spalva: kitas, pavaros tipas: kitas, priekinės padangos dydis: 235/75 R 17,5, galinės padangos dydis: 235/75 R 17,5, vairuotojo kabina: kitas, emisijos klasė: nėra, kuras: biodujelis, Įranga: ABS, suspausto oro stabdys,

Būklė: naujas, bendras svoris: 30 000 kg, ašių konfigūracija: 3 ašys, krovimo vietos ilgis: 8 200 mm, pakaba: oras, padangos dydis: 235/75 R 17,5, spalva: kitas, pavaros tipas: kitas, priekinės padangos dydis: 235/75 R 17,5, galinės padangos dydis: 235/75 R 17,5, vairuotojo kabina: kitas, emisijos klasė: nėra, kuras: biodujelis, Įranga: ABS, suspausto oro stabdys,

Būklė: naujas, tuščias svoris: 6 760 kg, didžiausias leistinas svoris: 23 240 kg, bendras svoris: 30 000 kg, ašių konfigūracija: 3 ašys, krovimo vietos ilgis: 8 100 mm, krovinių skyriaus plotis: 2 550 mm, pakaba: oras, padangos dydis: 235/75 R 17,5, spalva: kitas, pavaros tipas: kitas, priekinės padangos dydis: 235/75 R 17,5, galinės padangos dydis: 235/75 R 17,5, vairuotojo kabina: kitas, emisijos klasė: nėra, kuras: biodujelis, Įranga: ABS, suspausto oro stabdys,

Būklė: naujas, tuščias svoris: 7 460 kg, didžiausias leistinas svoris: 22 540 kg, bendras svoris: 30 000 kg, ašių konfigūracija: 3 ašys, krovimo vietos ilgis: 9 200 mm, krovinių skyriaus plotis: 2 550 mm, pakaba: oras, padangos dydis: 235/75 R 17,5, spalva: kitas, pavaros tipas: kitas, priekinės padangos dydis: 235/75 R 17,5, galinės padangos dydis: 235/75 R 17,5, vairuotojo kabina: kitas, emisijos klasė: nėra, kuras: biodujelis, Įranga: ABS, suspausto oro stabdys,

Būklė: naujas, tuščias svoris: 7 460 kg, didžiausias leistinas svoris: 22 540 kg, bendras svoris: 30 000 kg, ašių konfigūracija: 3 ašys, krovimo vietos ilgis: 9 000 mm, krovinių skyriaus plotis: 2 550 mm, pakaba: plienas, padangos dydis: 235/75 R 17,5, spalva: kitas, pavaros tipas: kitas, priekinės padangos dydis: 235/75 R 17,5, galinės padangos dydis: 235/75 R 17,5, vairuotojo kabina: kitas, emisijos klasė: nėra, kuras: biodujelis, Įranga: ABS, suspausto oro stabdys,

Būklė: naujas, tuščias svoris: 7 320 kg, didžiausias leistinas svoris: 22 680 kg, bendras svoris: 30 000 kg, ašių konfigūracija: 3 ašys, krovimo vietos ilgis: 8 100 mm, pakaba: plienas, padangos dydis: 235/75 R 17,5, spalva: kitas, pavaros tipas: kitas, priekinės padangos dydis: 235/75 R 17,5, galinės padangos dydis: 235/75 R 17,5, vairuotojo kabina: kitas, emisijos klasė: nėra, kuras: biodujelis, Įranga: ABS, suspausto oro stabdys,

Būklė: naudotas, tuščias svoris: 7 340 kg, didžiausias leistinas svoris: 22 660 kg, bendras svoris: 30 000 kg, ašių konfigūracija: 3 ašys, pirmoji registracija: 05/2012, krovimo vietos ilgis: 9 200 mm, pakaba: plienas, padangos dydis: 235/75 R 17,5, spalva: kitas, pavaros tipas: kitas, priekinės padangos dydis: 235/75 R 17,5, galinės padangos dydis: 235/75 R 17,5, vairuotojo kabina: kitas, emisijos klasė: nėra, Įranga: ABS, suspausto oro stabdys,