Schwarze-Robitec Cnc 60 Tb Mr Va pirkti naudotą (34 372)

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2011, veikimo valandos: 34 797 h, mašinos/transporto priemonės numeris: 2011-0250, Vamzdžio skersmuo (maks.): 600 mm, Vamzdžio ilgis (maks.): 1 500 mm, Lenkimo kampas (maks.): 180 °, lenkimo spindulys (maks.): 200 mm, sienelės storis: 3 mm, Original machine year 1996. In 2011, completely overhauled by the manufacturer for approx. EUR 250,000: electrical and mechanical systems extensively renewed. TECHNICAL DETAILS Tube diameter: 16 - 60 mm Wall thickness: max. 3.0 mm Bending radius: 20 - 200 mm Tube feeding length: 1,500 mm Bending angle: max. 180° + springback Tube length: 400 - 1,500 mm Tube outer diameter: 28 mm - 60 mm Material parameters Tensile strength stainless steel: max. 750 N/mm² Tensile strength mild steel: max. 450 N/mm² Performance limit (steel): Ø 60 x 3 mm Performance limit (stainless steel): Ø 57 x 2 mm Travel motions Bending direction: left Forward bending speed: max. 22.0 1/min (infinitely adjustable) Return bending speed: constant 22.0 1/min Twist angle: max. 360° Twist speed: 50 rpm Height adjustment for multi-radius: lowest tube center 55 mm Vertical travel: suitable for 3-groove bending tools MACHINE DETAILS Run-down time: 125 ms Machine weight: approx. 8.0 t Machine dimensions (L × W × H): 6,300 × 3,300 × 1,900 mm Control cabinet (L × W × H): 2,700 × 700 × 2,000 mm Control panel (L × W × H): 900 × 600 × 1,850 mm Tube magazine (L × W × H): 1,800 × 2,400 × 1,750 mm Operating hours: approx. 34,797 h Performance data Total power requirement: 55 kW Hydraulic reservoir volume: 340 l Control Iajdpfox Srklsx Aaujr Bending planes: up to 6 (CNC programmable) Positioning unit: NTB version Control unit: Schwarze-Robitec operation and control panel EQUIPMENT - Automatic cold tube bending machine - Tube positioning unit - Gripper - Schwarze-Robitec tube magazine - Hydraulic operation for bending table, tool clamping, sliding rail, mandrel retraction, reinforced sliding rail advance and return - Various bending tools for Ø 60 mm tube - Various auxiliary accessories - Control cabinet cooling unit - Foot switch (2 units) - Schwarze-Robitec operation panel - Control cabinet cooling unit Rittal type SK 3361100 Note: The machine could only be tested in setup mode due to lack of operating proficiency. No faults are known. The machine is currently dismantled.

Būklė: reikia remonto (naudotas), Funkcionalumas: neveikiantis, Gamybos metai: 2004, CNC Rohrbiegemaschine / CNC Tube Bending Machine Manufacturer: Schwarze-Robitec Model: CNC 80 E-MR Year of manufacture: 2004/2006 Condition: Needs repair CNC: CNC PC Control Beckhoff Technical Details: - Maximum tube diameter x wall thickness: 80 mm x 3 mm - Minimum tube outside diameter: 16 mm - Minimum bending radius to tube center: 25 mm - Maximum bending radius to tube center: 240 + 50 mm - Maximum bending angle: 180° - Max. tube lift length: 1000 mm - Bending direction: right - Machine weight: 7000 kg - Total connected power: 39 kW - Voltage: 400 V / 50 Hz - Current: 100 A - Machine dimensions (L x W x H): 6.2 x 3.2 x 2 m Equipment / Accessories: - Hydraulic pressure and feed for sliding rails - Automatic tube turning and positioning device - Electric mandrel bending device - Pneumatic mandrel rod safeguarding - PC control Beckhoff - Automatic central lubrication system - Laser scanner, safety fencing Note: Machine needs repair. The planetary gearbox of the transport carriage is defective and must be replaced. According to quotation, cost of spare parts (excluding installation): - Planetary gearbox: €1,674 Ijdpfxexzubvj Aauoar - Gearbox flange: €1,850 - Pinion: €850 (all prices plus VAT) Cheap sale in current condition – sale as is. Immediate delivery, free loading onto truck.

Būklė: naujas, Cutting diameter round: 460 mm Iajdpfx Aofg E Hvoauer Cutting diameter square: 460 mm Cutting diameter flat: 460 x 460 mm Saw band dimensions: 5450 x 41 x 1.3 mm Table height: 800 mm Band speed: 20 - 100 m/min Total power requirement: 5.5 kW Machine weight approx. 3.2 t Dimensions (L x W x H): 2,675 x 2.15 x 2.05 m SPECIAL OFFER PRICE!!!! 2-column high-performance bandsaw machines from the SBS series The SBS series stands out through advanced technology, premium quality, durability, and an unparalleled comprehensive standard configuration. • Modern SNC 20 control system in CNC version • Frequency-controlled saw drive • Control buttons with pictograms • Work light included • Powered chip brush • Hydraulic blade tensioning • Clamping pressure regulation • Double vice (before and after the saw blade) • Inch mode for positioning • Electrical and hydraulic bundle clamping provision • Chip conveyor The SNC 20 control system allows easy and straightforward input of up to 20 different sawing tasks (length and quantity). When the desired length is entered, the control system automatically calculates cutting allowance and the number of feed cycles. The error code display system also allows for quick fault analysis and troubleshooting.

Gamybos metai: 1980, būklė: naudotas, mašinos/transporto priemonės numeris: 80246, Max. tube diameter: 60.3 x 3.2 mm Max. bending angle: 180° Mandrel holder length: 3,000 mm Electrical connection: 380 V, 8.6 kW Iodpfx Aj N Hfpjauoar Required space: 2,400 x 5,700 x 1,500 mm Weight: approx. 2,500 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2003, Gilus gręžimo ir frezavimo staklės TBFZ 1600 CNC Pagaminimo metai: 2003 Ijdsxz Aygopfx Aaujar X ašies eiga: 1600 mm Y ašies eiga: 1200 mm Z ašies eiga: 500 mm W ašies eiga: 1200 mm B ašies eiga: 360° (pasukamas stalas) * Stalo dydis (ilgis x plotis): 1500x1500 mm * Lizdai (T-lizdas): 5x DIN 650-22 h12, 150 mm atstumas * Įrankio tvirtinimas: hidraulinis * Elektros jungtis: 400 V, 50 Hz * Suslėgto oro jungtis: vardinė srauto norma 7000 aps./min, darbinis slėgis: 6 bar * Botek grąžtas galima įsigyti papildomai * Pavaros tipas: bešepetėliniai AC servovarikliai * Padvairos greitis: 0-20000 mm/min * Greitoji eiga: X 20000 mm/min, Y+Z 20000 mm/min * Rankinis režimas: 20000 mm/min * Derinimo režimas: 0-2000 mm/min

Būklė: labai geros būklės (naudotas), Gamybos metai: 2001, gręžimo gylis: 700 mm, X ašies eiga: 1 600 mm, Y ašies eiga: 1 200 mm, Z ašies eigos atstumas: 1 600 mm, veleno greitis (min.): 6 000 aps./min, gręžimo skersmuo: 40 mm, stalo ilgis: 1 500 mm, stalo plotis: 1 250 mm, stalo apkrova: 10 000 kg, Pagaminimo metai: 2001 Iaedpfjxu Dkgox Aauor Valdymas: Heidenhain TNC 430 X: 1600 mm Y: 1200 mm Z: 1600 mm W: 500 mm Stalas: 1500 x 1250 mm, 10T B ašis, A ašis pasukama +/- 19 laipsnių Staklės su pilna apsauga Drožlių transporteris su aušinimo sistema Įrankių laikiklis SK50 Įrankių keitiklis - 20 vietų

Būklė: naujas, Cutting diameter round: 300 mm Cutting diameter square: 300 mm Cutting diameter flat: 300 x 260 mm Saw band length: 3920 x 34 x 1.1 mm Table height: 780 mm Band speed: 20 - 100 m/min Total power requirement: 3.7 kW Machine weight: approx. 1.65 t Dimensions (L x W x H): 2.0 x 2.05 x 1.7 m Unused demonstration machine!!!!! 2-column high-performance bandsaw automaton of the SBS series • Modern SNC 20 control unit in CNC version • Frequency-controlled saw drive • Work lamp • Powered chip brush • Hydraulic band tensioning • Clamping pressure regulation • Double vice (before and after the band) • Creep mode for positioning Iaedpfx Asxfwbtoauer • Bundle clamping electrically and hydraulically prepared • Chip conveyor The SNC 20 control allows for convenient and straightforward input of up to 20 different sawing tasks (length and quantity). When the target dimension is entered, the control automatically calculates the trim cut and the number of feeds. The error code display system also provides for rapid troubleshooting and error analysis. Including band run monitoring (EUR 1,800)

Būklė: naujas, Cutting diameter round: 300 mm Cutting diameter square: 300 mm Cutting diameter flat: 300 x 260 mm Saw band length: 3920 x 34 x 1.1 mm Table height: 780 mm Band speed: 20 - 100 m/min Total power requirement: 3.7 kW Machine weight approx.: 1.65 t Dimensions (L x W x H): 2.0 x 2.05 x 1.7 m SPECIAL OFFER PRICE!!!! 2-Column High-Performance Bandsaw Automatic Machines of the SBS Series The SBS series convinces with its advanced technology, high quality, durability, and an unrivalled comprehensive standard equipment package. • Modern SNC 20 control system for CNC versions • Frequency-controlled saw drive • Control buttons with pictograms Iajdpfx Aaofb Nbfsuer • Work light • Powered chip brush • Hydraulic band tension • Clamping pressure regulation • Double vise (in front of and behind the blade) • Creep speed for positioning • Bundle clamping, prepared for electrical and hydraulic operation • Chip conveyor The SNC 20 control system allows convenient and intuitive input of up to 20 different sawing jobs (length and quantity). When entering the target dimension, the control automatically calculates the kerf and the number of feed movements. Additionally, the fault code display system provides fast analysis for error correction.

Būklė: naujas, Cutting diameter round: 330 mm Cutting diameter square: 330 mm Cutting diameter flat: 400x330 mm Saw blade length: 4570 x 34 x 1.1 mm Table height: 800 mm Band speed: 20 - 100 m/min Total power requirement: 3.7 kW Machine weight: approx. 2.35 t Dimensions (L x W x H): 2.23 x 2.15 x 1.8 m SPECIAL OFFER PRICE!!!! 2-column high-performance bandsaw machines from the SBS series The SBS series impresses with advanced technology, high quality, long service life, and exceptionally comprehensive standard equipment. • Modern SNC 20 control system for CNC models • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic band tensioning • Adjustable clamping pressure • Double vice (before and after the blade) Isdpjfb Nbgofx Aausar • Creep mode for positioning • Bundle clamping prepared for electric and hydraulic operation • Chip conveyor The SNC 20 control allows convenient and straightforward entry of up to 20 different sawing tasks (length and quantity). When entering the desired dimension, the control automatically calculates the cutting allowance and the number of feed cycles. In addition, the error code display system enables quick diagnosis for troubleshooting.

Būklė: naujas, Cutting capacity at 90 degrees: round 510 mm Cutting capacity at 90 degrees: square 480 mm Cutting capacity at 90 degrees: rectangle 610 x 450 mm Saw blade length: 5320 x 34 x 1.1 mm Blade speed: 15 - 100 m/min Table height: 820 mm Total power requirement: 3.0 kW Machine weight approx. 2.3 t Space requirement approx. 2.65 x 2.8 x 2.2 m For mitre cuts up to 45° to the left in fully automatic mode and up to 60° to the left in semi-automatic mode Material height probe (automatic cut start detection) Automatic feed unit via ball screw spindle, incremental feed with automatic length compensation Probe on the saw blade for automatic adjustment of the saw stroke Fully automatic control of saw frame and clamping device Iajdpfx Aaefu Nbboujr Hydraulic unit with automatic pressure shut-off in idle mode Mechanical chip removal brush, feed clamping vice opening on both sides Remnant piece length 100 mm Modern CNC control, freely programmable for multiple sawing jobs with various cut lengths and quantities. Automatic feed unit 500 mm via ball screw spindle, incremental feed with automatic length compensation. Adjustable for cut lengths from 25 to 9,999 mm. Fully hydraulic control of the saw frame and clamping devices Preselection of 3 different material feed speeds Visualization of the entire workflow with simple data entry

Būklė: naujas, Cutting capacity at 90°: round 255 mm Cutting capacity at 90°: square 240 mm Cutting capacity at 90°: rectangle 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 870 mm Blade speed: 18 – 110 m/min Control system: CNC Total connected load: 1.5/1.8 kW Machine weight approx.: 0.63 t Space requirement approx.: 1.8 x 1.85 x 1.85 m Mitre band saw, fully automatic GBS 255 Super VA-I CNC • Mitre left 45°: fully automatic operation • Mitre left 60°: semi-automatic operation (cuts without programming) Ijdpfx Aaed Iipzjusar • Material height sensor (automatic cut start detection) • Frame and gearbox made from a single casting: very quiet, low vibration cutting • Removable chip tray (cleaning/disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • High-performance positioning with incremental encoder (CNC) • Top access to saw, material, and feed unit • Folding safety cover • Fine adjustment of feed rate • Semi-automatic cut! • Optimize workflows with CNC control Input options for various parameters such as quantities and material lengths, automatic calculation of the kerf • CNC control for 10 different sawing programs with 99 subprograms for various lengths and quantities, e.g., one cutting program with multiple cut lengths • Automatic feed unit (CNC) via ball screw spindle with incremental feed and automatic length compensation. Adjustable for cut lengths from 2 mm to 9,999 mm, residual piece length 170 mm.

Būklė: naujas, Cutting capacity at 90°: round 310 mm Cutting capacity at 90°: square 280 mm Cutting capacity at 90°: rectangle 400 x 250 mm Saw band length: 4020 x 34 x 1.1 mm Band speed: 18 - 100 m/min Table height: 890 mm Total power requirement: 2.2 kW Machine weight: approx. 0.99 t Space requirements: approx. 1.85 x 2.2 x 2.0 m Mitre band saw, fully automatic, GBS 310/400 VA-I CNC • Mitre cut left 45° automatic operation • Mitre cut left 60° semi-automatic operation (manual cuts without programming) • Material height sensor (automatic detection of cut start) • Frame and gearbox cast as one piece, very quiet operation and minimal vibrations • Removable chip tray (for cleaning) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Excellent accessibility to saw, material, and feed unit Isdpsd Iiprefx Aauear • Safety cover foldable • Fine adjustment of feed • Semi-automatic cutting! • With CNC control for workflow optimization Input options for parameters such as quantities and material lengths, automatic deduction of kerf • CNC control for 10 different sawing programs with 99 subprograms for various lengths and quantities, e.g. one cutting program with diverse section lengths • Automatic feeding unit (CNC) via ball screw, incremental feed with automatic length compensation. Adjustable for section lengths from 2 mm to 9,999 mm, minimum end piece 170 mm.

Būklė: naujas, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangular 350 x 200 mm Saw blade length 3375 x 27 x 0.9 mm Blade speed 18 - 100 m/min Table height 880 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.84 t Space requirement approx. 1.85 x 1.9 x 2.0 m Fully automatic mitre band saw • Mitre left 45° automatic operation • Mitre left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox cast in a single piece, very quiet and low-vibration cutting • Removable chip tray (designed for cleaning/disinfection) Iodpfx Aaeupw R Asuear • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Excellent accessibility to saw, material and feed unit • Foldable safety guard • Fine feed rate adjustment • Semi-automatic cutting! • CNC control for optimized workflows Allows input of various parameters such as quantities and material lengths, automatic calculation of the kerf • CNC control for 10 different sawing programs with 99 sub-programs for various lengths and quantities, e.g. one sawing program with multiple cut lengths • Automatic (CNC) feed unit via ball screw with incremental feed and automatic length compensation. Adjustable for cut lengths from 2 mm to 9,999 mm, minimum remnant length 170 mm. Including: - Micro-spraying device - Leveling elements

Būklė: naujas, Saw blade diameter: 370 mm Cutting range at 90°: round 120 mm Cutting range at 90°: square 100 mm Cutting range at 90°: rectangle 180x100 mm Working height: 925 mm Saw blade speeds: 17 - 70 rpm Total power requirement: 3.0 kW Space requirement approx.: 1.9 x 1.45 x 2.1 m SPECIAL OFFER PRICE!!! High-performance vertical circular saw, hydropneumatic fully automatic. (20195) · Mitre cuts left 60° and right 45° · Hydropneumatic control of the sawing unit · Electro-pneumatic material feed unit · Smooth-running, high-performance worm gear drive with large transmission ratio, integrated in a robust cast housing for optimum cutting results · Vise with double clamping arm for low-burr cutting, additionally equipped with rapid lateral adjustment for angle changes Iajdpfxsd Iin Es Aaujr · Precision prism guide for the gearbox head, laterally adjustable · Especially robust base frame with built-in automatic cooling system · Large chip collection drawer · Chip removal brush integrated in the saw blade guard CNC control system: · Keypad for over 90 different sawing programs with 99 subprograms for length, quantity, and angle · Automatic feed unit 2,000 mm via ball screw spindle, incremental feed with automatic length compensation. Adjustable for cut lengths from 25 – 9,999 mm. · Fully hydraulic control of saw frame and clamping devices · Preselection of 3 different material feed rates · Visualization of the entire work process with simple data entry PLEASE NOTE: Price does not include saw blade! (Saw blade price: €204)

Būklė: labai geros būklės (naudotas), Gamybos metai: 1999, X ašies eiga: 500 mm, Y ašies eiga: 350 mm, Z ašies eigos atstumas: 610 mm, veleno greitis (maks.): 10 000 aps./min, bendras aukštis: 2 700 mm, bendras plotis: 1 700 mm, bendras ilgis: 2 000 mm, galia: 0,01 kW (0,01 AG), CNC drilling and milling machine with Heidenhain TNC 426 control, only 8,500 operating hours. Table size 380x920 mm, travel distances X/Y/Z/W - 500/350/610 mm, maximum table load 250 kg, infinitely variable spindle speeds 50–10,000 rpm, spindle power 10.2 kW, drilling capacity Ø 25 mm, tapping capacity M20, tool system SK 30, tool changer with 24 stations, electronic handwheel, central lubrication, oil mist filter, coolant recirculation chiller, prepared for through-spindle coolant (IKZ) and Renishaw, includes numerous tools and holders, operating manual included. Iajdetvmtkopfx Aauor

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2019, Dviejų kolonų aukštos našumo automatinė juostinė pjovimo staklė BERG & SCHMID SBS 300 VA-1/CNC Pagaminimo metai: 2019 Apvalus pjovimo skersmuo: 300 mm Iaodpfx Aoyw H Enjaujr Kvadratinis pjovimo skersmuo: 300 mm Plokščio pjovimo matmenys: 300 mm x 260 mm Juostelės greitis: 20 – 100 m/min Moderni SNC 20 valdymo sistema Dažniu reguliuojamas pjovimo pavara Valdymo mygtukai su piktogramomis Varoma drožlių šepetys Hidraulinis juostos įtempimas Spaudimo reguliavimas Darbo lempa Drožlių transporteris 2 m ritininis stalas

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 600 mm, Y ašies eiga: 510 mm, Z ašies eigos atstumas: 510 mm, greitas poslinkis X ašimi: 30 m/min, greitas poslinkis Y ašis: 30 m/min, greitasis eiga Z ašyje: 30 m/min, valdiklių gamintojas: FANUC, valdiklio modelis: Series 0i/-MC, bendras aukštis: 2 580 mm, bendras ilgis: 2 150 mm, bendras plotis: 2 470 mm, stalo plotis: 750 mm, stalo ilgis: 540 mm, bendras svoris: 4 500 kg, veleno greitis (maks.): 8 000 aps./min, veleno veikimo valandos: 1 480 h, veleno nosis: ISO40, ašies skaičius: 1, įrankių magazino lizdų skaičius: 20, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, Schaublin 60 CNC puikiai tinka preciziškiems darbams ir mažoms serijoms. Šis įrenginys pasižymi labai aukštu matmenų ir formos tikslumu, puikiu veleno apvalumu ir itin kokybišku paviršiumi – idealiai tinka įrankiams gaminti, tiksliosios mechanikos ar medicinos/juvelyrikos pramonei! Standartinėje komplektacijoje: - Vidinis aušinimas (TSC) - Elektroninis rankenėlė - Originali dokumentacija - apie 30 prispaudimo varžtų Isdpfxsyu Rpkj Aauoar

Būklė: naujas, Pressure: 60T Bending length: 1550 mm Frame gap: 1250 mm Installation height: 410 mm Stroke length (max.): 220 mm Throat depth: 400 mm Dimensions (LxWxH): 2445x2200x2390 mm Approximate weight: 4250 kg Motor power: 7.5 kW Feature Value Unit Bending length 1550 mm Bending force 60 t Descent speed 180 mm/s Bending speed 10 mm/s Return speed 160 mm/s Stroke 220 mm Distance between open sides (D) 410 mm Straight depth (E) 400 mm Distance between side frames (B) 1250 mm Length (L) 2445 mm Width (W) 2200 mm Width without front gauge (Y) 1635 mm Maximum height 2390 mm Main motor 7.5 kW Oil tank 100 l Weight 4300 kg The powerful EUROPA XL press brake stands out for its high precision, accuracy, and versatile range of applications. EUROPA XL offers an extremely large installation height and, as a result, a long stroke (cylinder travel). The throat depth is also above average, ensuring maximum versatility and minimal restrictions. We focus on quality, which is also reflected in the control system. As a standard control, we use the high-quality Esa S640 (2D graphical control). Furthermore, the KKI Europa XL press brake is equipped with Y1, Y2, X axes via the control system. We also make no compromises with the upper tool and die, equipping the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, any machine is only as good as its service. This is why we emphasize highly qualified staff with extensive experience in CNC sheet metal processing. CNC axes: Y1, Y2, X Esa S640 (2D graphical control) Backgauge with dual linear guide and ball screw drive 2 heavy-duty front support arms with height adjustment via handwheel (from 175t, heavy-duty version on linear guide rails) Laser safety device on upper beam CE safety equipment Various options available Options: R-Axis ¤ 5,375.00 Additional controls: ESA 640 2D 15'' touchscreen control ¤ 4,520.00 incl. Iodpfod En R Djx Aaujar ESA 675 W 3D 21'' touchscreen control (Windows-based) ¤ 6,485.00 DELEM 66 T 2D 17'' touchscreen control (Windows-based) ¤ 10,165.00 DELEM 69 T 3D 17'' touchscreen control (Windows-based) ¤ 16,350.00 KK-Industries GmbH There is something for everyone!

Gamybos metai: 1981, būklė: labai geros būklės (naudotas), Dörries CNC Vertikaldrehmaschine, einspindlig, mit verschiebbarem Tisch - Hersteller: Dörries – Deutschland - Typ: CTE 320 / 3400 - Baujahr: 1981 – ehemals Luft- und Raumfahrt! - Seriennummer: D 149 / 5079 - Planscheibendurchmesser: 3.200 mm - Max. Drehdurchmesser Pos. 2: 5.100 mm - Max. Drehhöhe: 2.650 mm - Werkzeughalterhub: 1.250 mm - Querschlittenverstellung: 1.500 mm - Tischbelastung: 60.000 kg - Werkzeugaufnahme: 40 x 40 mm Iajdpfx Ajkwcpxeauer - Max. Zerspanungsleistung: 75.000 W - Max. Drehmoment am Tisch: 60.000 Nm - Hauptantriebsmotorleistung: 75 kW / 415 V - Drehzahlbereiche 1 / 2 / 3: 0,8 – 100 U/min - Vorschübe variabel: 0,1 – 1.000 mm/min - Eilgang: 6.000 mm/min - Maschinenabmessungen (L x B x H x Gewicht): 9,30 x 6,10 x 6,30 x 60 - CNC-Steuerung: Siemens Sinumerik System 8 - Werkzeugwechsler: 16 Positionen - SCR-Antriebe für alle Achsen individuell - Kugelgewindetriebe + Rollenschienenführungen - Tischverstellung hydraulisch/manuell - Kreisinterpolation Hinweis: Die oben genannten Angaben wurden nach bestem Wissen und Gewissen sowie nach Möglichkeit vom Hersteller übernommen. Sie erfolgen nach bestem Wissen, ihre Richtigkeit kann jedoch nicht garantiert werden. Die Angaben stellen keine zugesicherten Eigenschaften oder Vertragsbestandteile dar. Bitte überprüfen Sie alle für Sie wesentlichen Details selbst.

Būklė: naudotas, Gamybos metai: 2001, stiebo tipas: simpleksas, Įkroviklis Iodpfx Aoync Tnsauear Stiebo tipas: Standartinis

Būklė: labai geros būklės (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, veikimo valandos: 6 000 h, X ašies eiga: 505 mm, Y ašies eiga: 350 mm, Z ašies eigos atstumas: 610 mm, ruošinio svoris (maks.): 300 kg, valdiklių gamintojas: Heidenhain, bendras svoris: 250 kg, stalo ilgis: 920 mm, stalo plotis: 380 mm, valdiklio modelis: TNC 426, X ašies padavimo greitis: 20 000 m/min, Y ašies padavimo greitis: 20 000 m/min, padavimo greitis Z ašis: 20 000 m/min, ašies variklio galia: 10 W, veleno greitis (maks.): 18 000 aps./min, veleno greitis (min.): 50 aps./min, stalo aukštis: 1 004 mm, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, The machine is equipped as follows: - Tool holder: SK 30 - Tool changer with 24 positions (automatic tool change) Ijdpfx Aov A Tyqoaujar - Coolant system - Spindle cooling - Mist extraction unit - Chip drawer - RENiSHAW probe

Būklė: naudotas, Gamybos metai: 1995, Techninės detalės: Šlifavimo ilgis: 1250 mm Šlifavimo plotis: 600 mm Rušinio aukštis: 730 mm Stalo paviršius: 1720 x 500 mm Špindelio mazgas: atstumas nuo stalo iki špindelio centro: 900 mm Maks. išilginis judėjimas: X-1450 Padavimo diapazonas: 10 - 20 000 mm/min Vertikalus judėjimas: Y-730 mm Ijdpfx Ajx Uzvpoauoar Padavimo diapazonas: 0,2 - 3 000 mm/min Skersinis judėjimas: Z-550 mm Padavimo diapazonas: 5 - 5 000 mm/min Variklio galia: 1500 aps./min – 44 kW / 8000 aps./min – 38 kW Šlifavimo disko greičio diapazonas: 50–6 000 aps./min Pjovimo greitis: maks. 80 m/sek. Mašinos svoris apie: 11 t su CNC SIEMENS 840 C automatinė dinaminio balansavimo sistema integruota šlifavimo špindelio kūgyje profiliavimo šlifavimo įtaisas (sumontuotas ant stalo) deimantiniai profiliuoti ritinėliai (maks. Ø 140 mm, maks. plotis 200 mm, kiaurymė 52 H3) Sukimosi greitis: 3000 aps./min 2 magnetinės plokštės (1000 x 400 mm, 1200 x 350 mm), įvairūs šlifavimo disko flanšai

Būklė: naujas, Cutting diameter: 305 mm Cutting capacity at 90° (flat): 350 x 200 mm Cutting capacity at 90° (square): 260 mm Cutting capacity at 45° (flat): 230 x 200 mm Cutting capacity at 45° (round): 250 mm Cutting capacity at 45° (square): 230 mm Cutting capacity at 60° (flat): 170 x 100 mm Cutting capacity at 60° (square): 155 mm Cutting capacity at 60° (round): 175 mm Blade speed range: 18 – 110 m/min Saw blade dimensions: 3,375 x 27 x 0.90 mm Working height: 880 mm Total power requirement: 1.5 / 1.8 kW Machine weight approx.: 840 kg Space requirements approx.: 1,900 x 1,850 x 2,000 mm Equipment: - Mitre cutting left 45° automatic operation - Mitre cutting left 60° semi-automatic operation (cuts without programming) - Material height sensor (automatic cut start detection) - One-piece cast frame and gearbox - Very quiet operation and extremely low vibration - Removable chip tray (for cleaning/disinfection) - Shock-proof and ergonomic control panel with oil-resistant EPDM cover - Optimized accessibility to saw, material, and feed unit - Foldable safety cover - Fine adjustment of feed rate - Semi-automatic cutting BERG SCHMID CNC Control: - Input options for various parameters such as quantity and material lengths, automatic kerf compensation Iaodpfx Aajxabaceuor - For 10 different sawing programs, with 99 sub-programs - For various lengths and quantities, e.g., one sawing program with multiple cut-off lengths - Incremental feed with automatic length compensation - Adjustable for cut-off lengths from 2 mm to 9,999 mm, remnant length 170 mm - Single stroke feed carriage 500 mm Manufacturer’s information: When installing this saw in a network with a residual current circuit breaker (RCCB), make sure to use a type sensitive to all currents and not rated below 300 mA.

Būklė: naudotas, Gamybos metai: 1990, Space requirements approx.: 3.5 x 2.0 x 2.5 m Iedpfjwwlu Ijx Aausar

Būklė: naujas, Condition: New Delivery time: approx. 8 weeks from order Country of origin: Italy Price: €12,460 Leasing rate: €239.23 Max. diameter (steel tube): 60 mm Length: 500 mm Width: 760 mm Height: 1,000 mm Weight: 186 kg Max. bending modulus (E modulus): 10 cm³ Standard steel tube: 60 x 4 mm Gas pipe for piping: 2" x 3.91 mm Furniture tube: 60 x 4 mm Stainless steel AISI304-318: 60 x 2 mm Stainless steel AISI308 (food grade): 60 x 3 mm Soft brass: 60 x 6 mm Hard copper and aluminium: 64 x 6 mm Soft copper: 64 x 6 mm Conduit pipe (TAZ): 63 x 4 mm Mepla, Gebereit and similar: 50 x 4 mm Iajdpfxowiru Ss Aausr Round steel (S275JO): 35 mm Solid bar steel (S275JO): 35 x 35 mm Flat steel (S275JO): 60 x 20 upright, 60 x 35 mm Max. bending radius: 380 mm Min. bending radius: 10 mm Min. tube Ø: 10 mm Max. bending speed: 1.5 / 3 rpm Motor: 1.5 kW Digital display for bending angle Digital display for clamping position Quick tool change system with various radii available Spring-back compensation Foot pedal Operating manual Tools not included, prices on request