Perkin Elmer Perkinelmer Protome Works Sistema pirkti naudotą (62 909)

Būklė: naudotas, Šis skelbimas skirtas Perkin Elmer The Protome Works System Mass PREP stočiai – robotizuotai baltymų tvarkymo sistemai. Pgodpjxzhucofx Apysk

Gamybos metai: 2022, būklė: naudotas, Parduodu spektrometrą, pilną komplektą. Būklė ideali. Prietaisas nebuvo eksploatuojamas ar servisuojamas. Naudojamas nuo 2022 metų. Psdsyw Rfljpfx Apyogk

Būklė: naudotas, Perkin Elmer Instruments Differential Scanning Calorimeter with Cooling, DSC 8000, N5340524 Model: DSC8000 Type: N5340524 Condition: Used General Information: Double-furnace differential scanning calorimeter with power compensation, Perkin Elmer DSC 8000 with Intracooler 2, enables precise heat flow measurements from approx. –70 °C to 750 °C, featuring high sensitivity and rapid thermal response. General Instrument Specifications DSC Type: Double-furnace design (independent sample and reference furnaces) Measurement Principle: Power compensation Furnace Material: 90% platinum alloy Temperature Sensors: Distributed platinum resistance thermometers Temperature Performance Standard Temperature Range: approx. –180 °C to 750 °C (with appropriate cooling accessories) With Intracooler 2: approx. –70 °C to 750 °C Minimum Temperature (Intracooler 2): approx. –80 °C Heating Rate: 0.01 to 300 °C/min Cooling Rate: 0.01 to 150 °C/min Measurement Performance Dynamic Range: ±800 mW (typical) High sensitivity and rapid response due to low-mass furnace design Excellent baseline stability and temperature accuracy Gas and Atmosphere Control Two controlled gas lines with automatic switching Typical purge gases: Nitrogen, Helium, Argon Supports high gas purity (up to 99.999%) Interfaces and Connections USB Ethernet (LAN) Gas inlet ports Connection for cooling unit Power supply connection Accessory interfaces (e.g., autosampler, high-pressure cell, UV/photocalorimeter module) Interface for temperature calibration Technical Data 3.15 AMP T (5 x 20 mm) 250 V 100–240 VAC 50/60 Hz Maximum power 400 VA Accessories Pgsdeyluicepfx Apyjk Cooling system PolyScience Intracooler 2 Norgren gas pressure regulator with gauges for external gas supply 96-position autosampler High-pressure DSC cells, UV/photocalorimeter accessories IEC power connector Documentation PolyScience Intracooler 2 Model: N5341746 P10N9E402E Voltage: 240 IP-100 Hz/A/Ph: 50/7.5/1 Refrigerant: 350 g R-404A Note regarding item condition: Sold without software/PC.

Gamybos metai: 2024, būklė: beveik kaip naujas (naudotas), Compact instrument for automated nucleic acid purification The Perkin Elmer Chemagic 360 is an automated benchtop system designed for the isolation of nucleic acids (DNA and RNA) from a wide range of sample materials. It utilizes Chemagen’s magnetic bead technology to obtain highly pure nucleic acids suitable for various downstream applications. With dimensions of only 80 x 80 cm and unique sample volume flexibility, the Chemagic 360 is an innovative instrument that can be tailored to nearly all your nucleic acid purification requirements. Thanks to the proven M-PVA magnetic bead technology, the Chemagic 360 delivers high yields of highly pure nucleic acids suitable for a wide array of downstream applications such as NGS, MLPA, genotyping, and PCR. Key Features at a Glance • Optimized design to prevent cross-contamination • Sample volumes from 10 µl to 10 ml • Throughput of 96 to 4000 samples per day • Compact construction • Ultra-fast protocols available for DNA purification • Flexible reagent dispensing to keep operating costs low • User-friendly interface for easy and fast installation • Easy integration into liquid-handling platforms Your Benefits at a Glance • Direct DNA isolation from human whole blood or plasma samples—no pre-treatment of primary samples required prior to extraction • “Ready-to-use” DNA with high yield and purity • Fast processing times: 96 samples in under 60 minutes • Long DNA fragments: up to 200 kb, suitable for NGS • High recovery rates • Autonomous operation for downstream assays Specifications: Pjdpfsyk Uy Sox Apyogk Manufacturer: Perkin Elmer Model: Chemagic 360 Throughput: Approx. 96 samples per run Sample capacity: 12, 24, and 96 Volume: 10 microliters up to 10 ml Extraction heads (chemagic rod heads): 96 Number of samples: 1 – 96 Sample volumes: 10 µl to 400 µl Tube plates: 96-well plates Extensive kit portfolio—including whole blood, saliva, serum/plasma, etc. No cross-contamination Revolutionary, compact benchtop design LCD monitor, keyboard, mouse Power supply: 100–240 V~ (AC), 50/60 Hz Dimensions: 800 x 800 x 900 mm Weight: 140 kg Year: 2024 Video link Chemagic 360 Financing through our partner bank is available. komplett-konzept.leasingo.de Find more new and used items in our shop! International shipping costs on request!

Gamybos metai: 2024, būklė: beveik kaip naujas (naudotas), Perkin Elmer Chemagic 360-D Nucleic Acid Extraction System The Perkin Elmer Chemagic 360-D is an automated benchtop system for isolating nucleic acids (DNA and RNA) from a wide range of sample materials. It utilizes Chemagen’s magnetic bead technology to provide highly pure nucleic acids for various downstream applications. Main Features and Specifications Technology: The system is based on the patented Chemagen M-PVA magnetic bead technology. Metal rods are magnetized to collect beads with bound nucleic acids and transfer them between different process solutions, minimizing cross-contamination. Sample Volume Flexibility: It offers various rod heads (magnetic rod heads) for different volume ranges and throughputs: - 12-Rod Head: For sample volumes from 1 ml to 10 ml. - 24-Rod Head: For sample volumes from 200 µl to 4 ml. - 96-Rod Head: For sample volumes from 10 µl to 400 µl. Applications: The isolated nucleic acids are suitable for a wide variety of applications, including next-generation sequencing (NGS), genotyping, PCR, and MLPA. Software: The intuitive Chemagic software allows easy setup of protocols, tracking of process status (run time, remaining time), and generation of LIMS-compatible protocol files for quality assurance. Accessories: An optional Chemagic Dispenser 360 is available to quickly and accurately pre-fill reagents, thereby reducing manual labor time. Dimensions: The unit measures 800 x 800 x 900 mm (L/W/H). Certification: The 360-D version is a CE-IVD registered and FDA-listed instrument intended for in vitro diagnostics (when used in combination with appropriate kits). Key Advantages at a Glance • Direct DNA isolation from human whole blood or plasma samples: No pre-treatment of primary samples required prior to extraction • Ready-to-use DNA with high yield and purity • Fast processing times: 96 samples in less than 60 minutes • Long DNA fragments: up to 200 kb, suitable for NGS • High recovery rates • Autonomous operation regarding downstream assays Specifications: Manufacturer: Perkin Elmer Model: Chemagic 360-D Throughput: Approx. 96 samples per run Sample capacity: 12, 24, and 96 Volume: 10 microliters to 10 ml Extraction heads (chemagic rod heads): 96 Number of samples: 1 – 96 Sample volumes: 10 µl to 400 µl Tube plates: 96-well plates Extensive kit portfolio – whole blood, saliva, serum/plasma, etc. No cross-contamination Revolutionary compact benchtop design Computer workstation with Chemagic software LCD monitor, keyboard, mouse Power supply: 100–240 V~ (AC), 50/60 Hz Dimensions: Width: 900 mm (1500 mm with display attached and door open) Depth: 820 mm (1000 mm with door open) Height: 900 mm Weight: 140 kg Year of manufacture: 2024 Video link Chemagic 360-D Pjdpfeyk Upmsx Apyogk Financing through our bank is possible as well. komplett-konzept.leasingo.de You will find more products – new and used – in our shop! International shipping costs on request!

Būklė: naudotas, Questa inserzione riguarda il PerkinElmer Chemagic™ 360 – Sistema automatico per l’estrazione di acidi nucleici. L’unità è in perfette condizioni operative ed è pronta per l’uso immediato. Ogni strumento è montato su un carrello industriale con ruote piroettanti bloccabili. Il PerkinElmer Chemagic™ 360 è uno strumento da banco compatto ad alta produttività, progettato per l’estrazione automatizzata di DNA e RNA da una vasta gamma di campioni, inclusi sangue, plasma, saliva, tessuti e campioni FFPE. Utilizza la tecnologia proprietaria Chemagen M-PVA a perline magnetiche per una purificazione efficiente e affidabile degli acidi nucleici, garantendo rese elevate e purezza eccellente. Pgsdpfxsxhgm Rj Apyek Caratteristiche principali e vantaggi - Volume di campione flessibile: gestisce volumi da 10 µL a 10 mL, supportando diversi protocolli e tipologie di campione. - Alta produttività: può processare fino a 96 campioni per ciclo, ideale per biobanche, laboratori clinici e istituti di ricerca. - Compatibilità con kit di grande formato: consente la lavorazione di campioni in grandi volumi grazie all’elevata capacità dei reagenti. - Prevenzione della contaminazione crociata: protocolli ingegnerizzati e separazione magnetica riducono al minimo il rischio di contaminazione tra campioni. - Gestione mista dei campioni: possibilità di trattare differenti materiali nella stessa sessione, ottimizzando l’efficienza del flusso di lavoro. - Pronto per l’integrazione: compatibile con piattaforme automatizzate di manipolazione liquidi per flussi di lavoro integrati. - Ingombro ridotto: design compatto con dimensioni di 80 x 80 x 90 cm (L x P x A), adatto a laboratori con spazio limitato. - Gestione avanzata dei campioni: facilita la gestione operativa e riduce il tempo di intervento manuale. - Scanner per codici a barre: consente la tracciabilità automatica dei campioni durante tutto il processo. - Integrazione LIMS: genera file di log compatibili con sistemi LIMS, assicurando piena tracciabilità e conformità dei dati. - Interfaccia intuitiva: software user-friendly per configurazione semplice, personalizzazione dei protocolli e monitoraggio in tempo reale. Specifiche tecniche - Capacità campioni: 1–96 per ciclo - Range di volume campione: 10 µL – 10 mL - Tempo di processo: circa 45 minuti per 400 µL di sangue intero - Dimensioni (L x P x A): 80 cm x 80 cm x 90 cm - Peso: 140 kg - Alimentazione: 100–240 VAC, 50/60 Hz Applicazioni ideali - Next-generation sequencing (NGS) - PCR e qPCR - Genotipizzazione e MLPA - Diagnostica clinica - Preparazione campioni per biobanche

Būklė: naudotas, Šis skelbimas skirtas Perkin Elmer Sciex Turbo Ion Spray šaltiniui. Įrenginys yra visiškai veikiantis ir paruoštas naudoti nedelsiant. Kas yra PerkinElmer Sciex Turbo Ion Spray (Turbo V) šaltinis? Turbo V jonizacijos šaltinis (dažnai vadinamas Turbo Ion Spray šaltiniu) yra itin patikimas ir efektyvus LC-MS/MS sistemų jonizacijos modulis, iš pradžių sukurtas PerkinElmer, vėliau tobulintas SCIEX. Pagrindinės savybės ir veikimo principas: Jonizacijos režimai Elektrospray jonizacija (ESI): Naudojamas TurboIonSpray® zondas. Aukštos įtampos purškimas sukuria įkrautas lašeles, o dvi įkaitinto azoto dujų srovės – ortogonaliu išdėstymu – gerina lašelių džiūvimą, kertantis su purškimu maždaug 90° kampu, kas užtikrina efektyvią jonų generaciją. Atmosferinio slėgio cheminė jonizacija (APCI): Naudojamas atskiras APCI zondas. Pedsxhfc Repfx Apyogk Mėginys yra išpurškiamas, išgarinamas keramikiniu šildomu vamzdžiu, vėliau jonizuojamas koronos iškrova šalia įėjimo angos. Konstrukcijos ir našumo ypatumai Legendinė ortogonalaus purškimo konstrukcija pasižyminti paprastumu ir ilgaamžiškumu. Tolygus temperatūros paskirstymas ir optimizuotas „curtain gas“ srautas užtikrina aukštą patvarumą ir žemą priežiūros poreikį. Patikimumas ir produktyvumas Konstrukcija leidžia sistemai veikti stabiliai kelias paras, kaip parodė tyrimai.

Būklė: naudotas, Šis pasiūlymas skirtas Perkin Elmer Lambda 35 spektrofotometrui. Pgodpoxx Axwefx Apyok

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 21FW100020, The FluidWorker® 100 reduces bacteria in the cooling lubricants of machine tools in an environmentally friendly and efficient manner using UV-C technology. It is also successfully used for chemical-free bacterial control in process water systems, such as parts washers, cleaning baths, quench coolants, etc. By using a FluidWorker 100 on the machine tank, environmentally and health-hazardous biocides can be significantly reduced. Biocides are the main cause of allergies, respiratory diseases, and skin irritations in operators of machine tools. In most cases, using the FluidWorker 100 also increases the service life of cooling lubricants by at least 30%, which saves costs for both replacement and disposal of coolants. Psdpfxsqvzx Ne Apyogk The FluidWorker® 100 operates in a bypass circuit on the machine tank. All necessary installation accessories are included in the package.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: MGB1320E, centro aukštis: 180 mm, ruošinio svoris (maks.): 100 kg, šlifavimo ilgis: 500 mm, šlifavimo disko skersmuo: 400 mm, bendras plotis: 14 150 mm, bendras ilgis: 18 000 mm, bendras aukštis: 14 750 mm, šlifavimo skersmuo: 320 mm, ruošinio ilgis tarp centrų: 350 mm, šlifavimo ratuko plotis: 50 mm, veleno greitis (maks.): 3 000 aps./min, padavimo ilgis X ašis: 500 mm, padavimo ilgis Z ašis: 150 mm, X ašies padavimo greitis: 10 m/min, padavimo greitis Z ašis: 1 m/min, bendras svoris: 2 100 kg, ruošinio veleno greitis (maks.): 400 aps./min, Įranga: sūkių greitis be galo kintamas, Beijing No.2 Machine Tool Works (BEIER) Semi-automatic High-speed Cylindrical Grinder MBS1320E Online production equipment; machine testing available; roundness within 0.001 mm Manufacturer: BEIER MACHINE TOOL WORKS CO LTD Pgodpfx Aetr Azkepyek

Gamybos metai: 1999, būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Hersteller: VITAP Modell: SIGMA 2TA Maschinentyp: Mehrfach-Bohrsystem für Reihen- und Dübelbohrungen Baujahr: 1999 Durchlaufanlage: ja Bohrbalken von unten: 4 Horizontale Bohrbalken: 2 Positionierung der Bohraggregate: manuell Maximale Arbeitsbreite: 2.500 mm Arbeitstiefe: 700 mm Maximale Durchlasshöhe: 40 mm Raster 32 mm: ja Bohraggregate pro Balken: 2 Anzahl der Spannbrücken: 2 Pneumatischer Oberdruck Psdpfx Apoiffpxeyjgk Positionierung der Bohrbalken: manuell Bohrbalken um 90° schwenkbar Bohrspindeln pro Balken: 2 CE-Kennzeichnung: ja Gewicht: 1.600 kg

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2000/80205, Complete powder coating line with automatic powder recovery. 1. WAGNER automatic spray booth – year of manufacture 2000 Serial number: 2000/80205 Booth dimensions: 5.3 x 2.2 x 2.8 m Currently equipped with 8 ZEUS Tribo guns with rotation Process type: pass-through Entry size for coated elements: 100 x 158 cm 2. IMEL washing machine, external dimensions 3 x 12 x 4.2 m (L-shaped) - Entry opening dimensions: 72 x 144 cm - Water tank: 3 x 2.2 x 1.2 m - Capacity: approx. 6000 liters (located beneath the washer) - Heated by Sant Andrea gas burner, model KB 40 GM with power modulation from 179 - 468 kW 3. WAGNER powder filtration system, dimensions 1.5 m x 3.2 m x 5.5 m 4. Overhead conveyor – length approx. 100 m, self-driven 5. WAGNER powder recovery system with cyclone Pgsdpoyrr Rqjfx Apyok 6. Oven (2 independent circuits) with gas burner 163 - 390 kW One circuit for drying items after washing, the second (longer) circuit for curing the powder coating after spraying. Oven dimensions: 12 x 7 x 5.3 m, max. size of coated element: 60 cm x 120 cm Additionally, we have 2 oil burners of comparable power available as an alternative to gas burners. Approximate total installation area: 30 x 11 m

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1991, mašinos/transporto priemonės numeris: MS 25E19111, Number of spindles: 6 Spindle bore: 27 mm Turning length: 59 mm Hexagonal material: 24 mm Square material: 18 mm Cross slide travel: 36 mm Longitudinal slide travel: 85 mm Spindle speeds: 366 – 5020 rpm Torque: 95 Nm Control: INDEX Total power requirement: 20 kW - 6 cross slides - 6 longitudinal slides - Polygon turning device - Thread cutting attachment - Hydraulic pick-off device - Workpiece discharge conveyor - Bar feeder, make: IEMCA model PRA 40/35/P Pgodpov Raatefx Apyjk

Būklė: naujas, Gamybos metai: 2026, Thanks to many years of experience of our CORMAK team, the DCV series extractors in the TC Viber version have been developed. The design of a new technological line has enabled us to create top-class extractors. Advantages: - Equipped with an additional pair of doors for easier bag replacement - The DCV 6500TC extractor marks another milestone in the production of efficient dust and chip extractors, designed to maintain consistent extraction parameters throughout the entire work cycle - The new TC series offers a fully enclosed upper housing that absorbs noise and vibrations during operation, as well as the ability to return warm air - Maintenance-free filter shaking system with the option for automatic operation - Newly patented safety system ensures reliable operation of the device - Durable, robust construction ensures quiet and vibration-free operation of the extractor - Compact footprint, yet capable of filtering large amounts of dust and chips - Powerful and quiet fan provides high negative pressure performance - Reliability confirmed by manufacturing facilities coping with high daily workloads - Specially designed impeller blades make the units more efficient and effective, also contributing to energy savings - Very high tightness of the entire suction system guarantees the highest indoor air quality and, during the heating season, prevents heat loss - Large filter area - Possibility to build an overhead system connecting several machines operating simultaneously with DCV 6500 extractors - Fast replacement of waste bins, designed to maintain 99.99% system airtightness - Metal waste bins with mobile running gear for easy and trouble-free movement. Also equipped with a sight glass to check the fill level of the containers - Low-noise operation and high efficiency ensured by a balanced metal impeller and upgraded motor - Provides perfection and cleanliness at the workstation, directly impacting the quality of your products - Excellent cooperation with machines such as sanders, edgebanders, panel saws, etc. - Control cabinet for switching the device on/off - We guarantee high purification quality! - Polyester filter traps dust down to 5 microns; for filtering smaller particles, use e.g. a HEPA filter - Do not use this extractor in explosive atmospheres - The extractor is intended for use in the woodworking industry with sawdust, chips, and dust (not suitable for wet material such as wet sawdust) - Before starting the extractor, remove the lower beam to allow access to the chip containers - MADE IN POLAND Technical specifications: MOTOR POWER (CONTINUOUS S1): 5.5 kW / 400 V, 50 Hz SPEED: 2900 rpm EXTRACTION CAPACITY: 6500 m³/h SUCTION PORT DIAMETER: 280 mm SUCTION SPEED: 28–32 m/s FILTER AREA: 16 m² FILTER MATERIAL: Polyester, 5 microns NUMBER OF FILTERS: 32 WASTE BIN CAPACITY: 500 L DIMENSIONS: 2440 x 930 x 2270 mm Pgedpfx Apjuc U N Ueyok WEIGHT: 440 kg

Būklė: naudotas, Gamybos metai: 1990, Zoller H520/019 – Įrankių matavimo staklės – optinis projektorius tiksliai pjovimo įrankių kontrolei. Pasukamas stalas (~760 mm), skaitmeninis rodmuo, tvirta pramoninė konstrukcija. Naudota, pilnai veikianti, paruošta darbui. Pgsdpfx Apsy Hl I Teyok

Gamybos metai: 2017, būklė: labai geros būklės (naudotas), HIGHLY AUTOMATED, MODULAR SYSTEM FOR DIGITAL BOOK PRODUCTION ("BOOK ON DEMAND") AND SHORT RUNS TECNAU LIBRA 800 Application: Suitable for pagination and processing of short print runs and single books (“books of one”) with varying sizes, page counts, and covers. Performance from print run 1; up to 800 copies per hour Book format: min.: 100 x 125 mm / max.: A4 Thickness: min.: 2 mm / max.: 60 mm Equipment / Further details: Line configuration: 1. Roll-fed input: unwinder, merger, Dupla cutter, and book assembly station for the production of book blocks from 2-up prints. Pgsdpfx Apjylyhdoysk 2. Sheet feeder: A variable number of loose sheets can be added as inserts to the book block. The sheets must be the same size and print run as the book block to be processed. 3. Feed to binding machine: Station for manual feeding of pre-assembled book blocks, transfer via reading station, book turner module, and loading robot at the binding machine. 4. Variable binding machine for the production of books with softcover. The binding machine is equipped with PUR application on the book spine and hot melt glue on the book sides. 5. Softcover cover machine, configured with cover sheet feeder: Pre-printed cover sheets are fed in, trimmed at the front, side trimmed and creased to the correct size to match the thickness of the respective book block. 6. Cooling tower/cooling conveyor (specific to product) not included in delivery Can be ordered as per customer requirements (product type). The cooling conveyor can be configured to suit spatial conditions and requirements at the machine’s installation location. The price of the conveyor depends on its configuration. We will be happy to advise you in selecting the appropriate conveyor. 7. Variable three-knife trimmer, suitable for trimming books of varying three-dimensional sizes with different cover types. 8. Software for plant control Finishing line The entire process is controlled via 2D Datamatrix codes. Via the code, the system receives clearance for the following automatic settings and workflow management: • Information about book dimensions and inserts (quantity and sequence) • Setup of the binding machine (spine position, thickness, and length) • Cover preparation: softcover → creasing, trimming, edge trimming • Correct book-to-cover assignment • Three-knife trimmer (knife positions are set automatically to book dimensions) Very good condition // Dismantling, packaging of the machine, and securing (insurance of the machine during transport) will be carried out by the manufacturer / Tecnau.

Gamybos metai: 2025, būklė: naujas, Funkcionalumas: visiškai funkcionalus, stalo aukščio reguliavimas: 300 mm, Įranga: USB jungtis, Height-adjustable workshop workstation – Workbench PowerLift and Workbench Standard tables. A robust height-adjustable workbench is the ideal solution for demanding users. Pedpfx Ajwn Da Djpysgk Adjustable work surface height: A reliable mechanical adjustment system allows users to easily set the workstation height to their individual needs, ensuring ergonomic and comfortable working conditions. Height adjustment range: approx. 760-1130 mm. Both the worktop and the tool board height can be adjusted mechanically using the included folding crank or with any standard power screwdriver. Robust construction: Manufactured from top-quality materials to guarantee stability even under uneven loading conditions. Load capacity up to 500 kg: The table is engineered to handle heavy tools and materials, perfect for intensive industrial and workshop use. Mobility: Retractable casters allow for effortless relocation of the workstation within the workshop without compromising stability during operation. Lighting: Equipped with a professional lamp featuring adjustable light intensity, which can be controlled locally via a dial knob or through a building management system. Standard lighting is based on the DALI system. Electrical panel: Standard features include an emergency stop button, three 230V sockets, and a lighting intensity controller for enhanced functionality and job safety. An additional fourth socket is positioned under the worktop. Tool board: The perforated tool board enables convenient organization of tools, helping keep the workstation orderly and efficient. As a renowned manufacturer of workshop furniture, Karnatech offers a 100% Polish product renowned for its premium build quality and meticulous attention to detail. The PowerLift is an investment in a durable and functional workstation that meets the expectations of even the most demanding professionals. We also offer more budget-friendly workstations without height adjustment functionality, available in various configurations. Workstations designed and manufactured in the EU.

Būklė: naujas, Gamybos metai: 2026, bendras ilgis: 600 mm, bendras plotis: 600 mm, bendras aukštis: 1 400 mm, garantijos trukmė: 12 mėnesiai, bendras svoris: 300 kg, įėjimo įtampa: 400 V, galia: 1,5 kW (2,04 AG), slėgis: 9,8 juosta, bakelio talpa: 50 l, RK50U – Universal forming system for the production of meat sticks, jerky & sausage snacks The HydroShpriz RK50U is a high-performance hydraulic filling and forming machine, developed for small and medium producers looking to start production of meat sticks, salami snacks, pet food, kibbeh, fruit bars and more. Ideally suited for dry-spiced snacks without alginate or natural casings. Compact, powerful, and easy to operate – the perfect entry-level solution with upgrade options available via our trade-in program. — Technical Specifications • Drive: hydraulic piston • Piston force: 94 kN • Power: 1.5 kW, 380 V, 50 Hz • Dimensions: 1050×550×950 mm • Weight: approx. 300 kg • Material: fully stainless steel construction • Certification: CE-certified, suitable for continuous operation (8 hrs) — Equipment & Features • Gear-type filling system – for dense, viscous mixes down to –2 °C • Multi-nozzle head: up to 25 shapes simultaneously • Round nozzle set: 8–22 mm diameter (sticks) • Flat nozzle set: 25–200 mm width, 3–5 mm height (jerky, strips) Psdpfxemrpvyo Apyogk • Sausage-filling set: for traditional casing sausage • Layering attachment: direct forming onto rack grids • Compatible with drying trolleys: 30 levels, 60 racks • Integrated time-controlled dosing: accuracy ±8 % • 24 V remote signal connector: for automatic clip machines (PolyClip, Compa, etc.) • Optional vacuum connection – for firmer texture, extended shelf life — Production Output • From 20 kg up to 1,600 kg per 8 hours, depending on product, form and nozzle system — Stock Availability ✔️ Immediately available through official distributors in: • Austria • Poland • United Kingdom • Lithuania • Australia • South Africa • USA Worldwide shipping, product training & spare parts included.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2021, We offer the ETL Prüftechnik ATS 400 X8 automatic test system, designed for electrical and safety testing of products in industrial and laboratory environments. The device is used, among others, in: • Quality control (QC) • Final production tests Pgsdpfx Ajyc H N Nspyek • Laboratories and OEM test stations ⸻ Basic data • Model: ATS 400 X8 • Power supply: 230 V / 50–60 Hz / max. 10 A • Year of manufacture: 03/2021 • Manufacturer: ETL Prüftechnik GmbH (Germany) • Condition: very good, well-maintained equipment • Last ETL factory calibration: 05/2023 • Weight: 38 kg ⸻ Equipment / included in the set • Main ATS 400 X8 unit with integrated touch screen • Windows 10 Pro (OEM) operating system • Complete set of test cables and accessories (as shown in the photos) • Manufacturer's documentation • Original markings, nameplates, CE ⸻ Technical notes • This is a professional test and measurement instrument, not consumer electronics • Ready for use in a production environment • No signs of tampering, complete set of connectors and interfaces

Būklė: labai geros būklės (naudotas), Siūlome profesionalią 3D optinę matavimo sistemą KEYENCE VL serijos, skirtą greitam ir tiksliam techninių detalių skenavimui. Rinkinys idealiai tinka kokybės kontrolei, atvirkštiniam inžinerijos procesui ir bekontakčiams matavimams pramonėje. Rinkinio sudėtis: Pgsdpfxjyc H Nps Apysk – Skenavimo galvutė VL-370 Būklė: labai gera, prižiūrėta įranga Pastaba: rinkinys parduodamas be monitoriaus / PC vieneto (galima papildomai įsigyti savarankiškai) Gamyba: Made in Japan

Būklė: labai geros būklės (naudotas), Parduodamas profesionalus, skaitmeninis Mitutoyo aukščio matuoklis (modelis 192-613) – japoniškas tikslumas ir patikimumas viename įrenginyje. Puikiai tinka dirbtuvėms, kokybės kontrolei ir preciziškiems matavimams. Specifikacija: Pgsdpfx Apew N Hn Soyjk • Matavimo diapazonas: 0–300 mm • LCD ekranas – aiškus rodmenų matomumas net esant prastam apšvietimui • Funkcijos: ZERO/ABS, PRESET, HOLD • Maitinimas: CR2032 baterija • Stabili bazė – užtikrina tvirtą atramą ir tikslius matavimus • Originalas – pagaminta Japonijoje Būklė: Įrenginys visiškai veikiantis, prižiūrėtas,

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, GHEBAL ištraukimo įranga Filtracinių maišų kiekis: 180 vnt Integruotas celių vožtuvas Ventiliatorius už celių vožtuvo Pagrindinio variklio galia: 30 kW, galima modifikuoti į 22 kW Pgodsx H Ndfepfx Apysk Maišų nukratymo sistema: pneumatiniu principu Matmenys: 3550 x 200 x 7850 mm Svoris: apie 2000 kg

Būklė: naudotas, Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 636, įvesties srovės tipas: trifazis, bendras plotis: 1 800 mm, įėjimo įtampa: 400 V, įėjimo srovė: 10 A, kėlimo aukštis: 2 000 mm, keliamoji galia: 250 kg, 31 C – Gerber Automatic Fabric Loading System (250 LU) – Industrial Spreading Line Unit Description For sale is a Gerber automatic fabric loading system (model 250 LU), designed for integration into industrial spreading and cutting lines. This unit enables efficient, safe, and controlled handling of heavy fabric rolls, significantly reducing manual labor in high-volume production environments. The installation was operated as part of a fully integrated production line together with a GERBER SY 101 spreading system (unit 21 C) and a Lectra Vector VT-FA-MH-71 CNC cutting system (unit 29 C). This configuration enables a seamless workflow from roll handling to spreading to cutting, maximizing production output with minimal downtime. The machine was used in a professional garment manufacturing facility and was functional until factory closure. Last serviced on 27.02.2026. Scope of delivery • Gerber automatic fabric loading system • Motorized lifting and roll feed system • Adjustable frame construction • Integrated operating controls and switches • Heavy-duty steel frame with rollers Technical details • Manufacturer: Gerber Technology • Model: LS-250-LU • Year of manufacture: 2004 • Serial number: 636 • Type: Automatic fabric roll loading system • Load capacity: up to 250 kg • Net weight: approx. 300 kg • Voltage: 3 × 380 V • Frequency: 50 Hz • Current draw: approx. 10 A Functionality • Automatic lifting and positioning of fabric rolls • Precise alignment for transfer to spreading machines • Consistent and controlled material feed • Mobile design for flexible use in production areas Production benefits • Reduces manual lifting of heavy rolls • Improves workplace safety and ergonomics • Minimizes downtime during roll changes • Supports continuous production processes • Ensures precise material feeding Integration • Optimized for Gerber spreading systems (e.g. SY 101) • Compatible with automated cutting lines (e.g. Lectra Vector) • Suitable for fully integrated production environments Condition Used industrial condition Serviced on 27.02.2026 Fully functional prior to decommissioning Normal signs of use present Inspection recommended Sold as seen ("as-is, where-is"), without warranty Applications Psdpfx Apsy Av H Ssyogk • Spreading systems • Textile production • Automated cutting rooms • High-throughput garment industry Location Valga, Estonia Dismantling and transport To be organized by the buyer Professional handling recommended due to size and weight

Būklė: naudotas, Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 9A5822, įvesties srovės tipas: trifazis, įėjimo įtampa: 400 V, įėjimo srovė: 60 A, bendras aukštis: 1 800 mm, pjovimo plotis (maks.): 1 720 mm, pjovimo aukštis (maks.): 50 mm, suslėgto oro jungtis: 6 juosta, For sale is an automatic CNC textile cutting system Lectra Vectorfashion VT-FA-MH-71, offered as a complete industrial production line. This system is designed for high-volume, precision fabric cutting in the apparel industry. It enables automatic multi-layer cutting with consistent quality, significantly increasing production efficiency compared to manual processes. The machine was operated as part of a standalone and fully integrated cutting line together with a GERBER SY 101 spreading system (Unit 21 C) and a Gerber automatic fabric loader (Unit 31 C). This configuration provides a continuous workflow from roll handling and spreading through to cutting, minimizing manual intervention. The system includes a large-format vacuum cutting table, a gantry-guided cutting head, as well as an integrated extraction and filtration system. Computerized operation ensures precise execution of cutting patterns and production sequences. The equipment was used in a professional garment manufacturing environment and was fully operational until the plant closure. The last maintenance was performed on 27.02.2026; an operational video dated 05.03.2026 is available. Scope of delivery: • Lectra Vector CNC cutting system • Gantry-guided cutting head • Conveyor-based cutting surface • Industrial vacuum system (approx. 30 kW) • Extraction and filtration system • Computer workstation with control unit Technical data: • Manufacturer: Lectra, France • Model: VT-FA-MH-71 • Serial number: 9A5822 • Year of manufacture: 2009 • Cutting technology: oscillating knife, suitable for multi-layer operation • Control system: computer-based (Lectra software environment) Electrical requirements: • Control unit: approx. 230 V • Vacuum system: approx. 400 V, up to 30 kW • Compressed air: 5–7 bar, dry and filtered Cutting performance: • Multi-layer cutting (approx. 25–70 mm, depending on material) • High speed and precision • Continuous material feed for efficient production Pgedpfxjy Avg Es Apysk Condition: Used industrial condition, was operational prior to decommissioning Typical signs of use present Sold as inspected (“as-is, where-is”), without warranty Areas of application: Garment manufacturing, denim and workwear, technical textiles as well as upholstery and automotive applications Location: Valga, Estonia Dismantling and transport: To be arranged by the buyer, professional dismantling is recommended

Būklė: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: BAR 13893, Funkcionalumas: visiškai funkcionalus, veikimo valandos: 500 h, tūrio srautas: 24 000 m³/val, įsiurbiamojo kolektoriaus skersmuo: 550 mm, filtravimo plotas: 180 m², triukšmo lygis: 82 dB, bendras aukštis: 7 550 mm, bendras svoris: 2 300 kg, Įranga: CE žymėjimas, dokumentacija / vadovas, Nutraukimo įrenginys yra labai geros techninės būklės, naudotas tik apie 500-600 darbo valandų. Podpfeyqwqaex Apyogk