Mep 332 Nc Evo pirkti naudotą (5 352)

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2007, Naudota automatinė hidraulinė metalo juostinė pjovimo staklė MEP SHARK 332 NC EVO. Pjovimo ašmenų matmenys: 3320x27x0,9 mm Pjovimo kampas: nuo 45° iki +60° Dwjdszyfwrjpfx Ag Ijb Veikimo režimai: rankinis, pusiau automatinis-dinaminis, pusiau automatinis, automatinis Pjovimo greitis: 15–100 m/min (inverteris) Pjovimo našumas: esant 0° kampui – apvalus 300 mm, kvadratinis 260 mm, stačiakampis 330x260 mm Matmenys: 2600x2320x2000 mm Pagaminimo metai: 2007 Svoris: 1050 kg Staklė buvo visiškai atnaujinta ir išbandyta.

Būklė: naudotas, Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, MEP Shark 282 NC evo – juostinis pjūklas. Šis tvirtas pjūklas idealiai tinka tiksliems pjūviams įvairiose medžiagose. MEP Shark 282 NC evo Gamintojas: Mep Dedpozmikvsfx Ag Iswb Modelis: Shark 282 NC evo Pagaminimo metai: 2008 Būklė: naudotas Daugiau informacijos teiraukitės.

Būklė: naujas, Cutting diameter: 300 mm Cutting capacity at 90° (flat): 330 x 260 mm Cutting capacity at 90° (square): 260 x 260 mm Cutting capacity at 45° (flat): 270 x 200 mm Cutting capacity at 45° (round): 260 mm Cutting capacity at 45° (square): 250 x 250 mm Dwjdpfofg E H Uex Ag Isb Cutting capacity at 60° (flat): 170 x 170 mm Cutting capacity at 60° (square): 170 x 170 mm Cutting capacity at 60° (round): 180 mm Blade speed range: 40 / 80 m/min Saw blade dimensions: 3320 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Electrohydraulic semi-automatic bandsaw SHARK 332 SXI EVO with semi-automatic-dynamic and manual operation. Equipped with MEP-28 control unit for mitre cuts from 45° right to 60° left. Key features: - New centralized control console mounted on an articulated arm. - Low-voltage operating panel: polyester membrane keypad with thermoformed, raised buttons and activation control signal. - Display for: * Diagnostics (messages in user language) * Alarms (description of alarm causes) * Input and output status * Cut counter * Time used for each cut * Saw band motor current draw * Saw blade tension * Saw blade speed * Numeric display of head position - IP55 manual cycle switch handle (24 V). - Complete programming of all special cutting cycles. - Capability to define additional special cutting cycles for specific applications. - Latest-generation high-performance, energy-efficient hydraulic control unit. - Rotating table (mounted on 420 mm roller bearing with preloaded thrust bearing). - Double band speed (40/80 m/min) with control system. - Prepared for installation of an electronic inverter for stepless band speed adjustment from 20 to 90 m/min. - Saw bow stroke programmable directly from the control panel to suit the cut material. - Clamping device laterally movable to left and right, with quick-release vice. - Manual band tension control with display via electronic transducer on screen. - Base frame designed to retain all coolant, even for maximum angle cuts. - Coolant tray (equipped with electric pump for the lubrication and cooling of the saw blade), and chip drawer (can be replaced by a chip conveyor – see special accessories), both integrated in the base frame. - Prepared for installation of a minimum quantity lubrication set for the saw blade (optional, in addition to standard coolant lubrication with emulsion oil). - Chip removal brush. - Machine designed for pallet truck transportation. - Adjustable length stop for repetitive cuts. - Material support arm with roller for attaching the loading table. - Bi-metal saw blade for solid and profile material. - Tools and operating instructions in the respective user language.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, pjovimo aukštis (maks.): 250 mm, pjovimo plotis (maks.): 280 mm, juostinio pjūklo ilgas: 2 950 mm, juostinio pjūklo greitis: 1 667 mm/s, pjūklo juostos plotis: 27 mm, TECHNINĖS DETALĖS Juostinio pjūklo matmenys: 2.950 x 27 x 0,9 mm Greitis: 15–100 m/min Spaustuvo atidarymas: 285 mm Pjovimo sritis prie 90° apvali: 250 mm Pjovimo sritis prie 90° kvadratinė: 220 mm Dwodpfx Aszapxzjg Iob Pjovimo sritis prie 90° plokščia: 280 x 220 mm Pjovimo sritis prie 60° apvali: 120 mm Pjovimo sritis prie 60° kvadratinė: 80 mm Pjovimo sritis prie 60° plokščia: 140 x 100 mm Pjovimo sritis prie 45° apvali: 230/200 mm Pjovimo sritis prie 45° kvadratinė: 200/170 mm Pjovimo sritis prie 45° plokščia: 220 x 200/200 x 140 mm Valdymas: konvencinis ĮRENGINIO DUOMENYS Bendras pajėgumas: 2,2 kW Svoris: 990 kg Įrenginio matmenys: 2.500 x 2.230 x 2.050 mm

Būklė: naujas, Saw blade dimensions: 3650 x 27 x 0.9 mm Cutting speed: 15 – 100 m/min Vice opening: 335 mm Cutting capacity at 90°: round 300 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: flat 330 x 260 mm Cutting capacity at 45°: round 260 / 200 mm Cutting capacity at 45°: square 250 / 180 mm Cutting capacity at 45°: flat 270 x 200 / 200 x 160 mm Cutting capacity at 60°: round 180 mm Cutting capacity at 60°: square 170 mm Cutting capacity at 60°: flat 170 x 170 mm Total connected load: 2.2 kW Weight: 1,105 kg Dimensions: 2700 x 2300 x 1800 mm Electrohydraulic fully automatic band saw with multi-microprocessor control and additional semi-automatic, semi-automatic dynamic, and manual operation modes. - Automatic cycle (cuts from 0° to 60° left). CNC automatic operation with two controlled axes, allowing the programming of up to 1000 different cutting programs for materials of identical thickness, each with separate cutting lengths and quantities. - Semi-automatic, semi-automatic dynamic, and manual cycles (cuts from 45° right to 60° left) - Semi-automatic dynamic system (manual lowering of the saw bow to the desired position and cycle start via hand control button) - Manual or semi-automatic dynamic cycle for direct cutting operations without programming. Selected features: - New fieldbus communication system (Modbus protocol) - Display with 20 characters x 4 lines for showing technical parameters such as: blade speed, programmed and completed cut quantities, blade thickness, feed length, cutting time, ammeter, blade tension, and display of approximately 100 diagnostic messages and warnings — available in the user’s selected language. - Logging and display of alarm and error messages, with the possibility to review past incidents. - Automatic parameter setting via control system when a new drive or inverter is installed. - Electronic inverter for infinitely variable blade speed adjustment from 15 to 100 m/min. Dwodpfxoyv Nylj Ag Ieb - Latest generation hydraulic control unit, offering high performance and low energy consumption. - New 600 mm material feed with stepper motor and ball screw mounted on opposing ball bearings. - Saw bow stroke programmable directly from the control panel for adaptation to the workpiece. - Electronic blade tension monitoring. - Automatic cutting force monitoring via a servo valve mounted directly on the cylinder. - Coolant tank (equipped with 2 electric pumps for band lubrication and cooling) built into the machine base. - Chip drawer (can be replaced by a chip conveyor — see special accessories) - Prepared for installation of a minimum quantity lubrication system for the blade (optional), alongside the standard emulsion oil lubrication. - Chip removal brush. - Machine is configured for pallet truck transport. - Bi-metal band saw blade suitable for solid and profile material.

Būklė: naujas, Cutting diameter: 300 mm Saw band length: 3320 x 27 x 0.9 mm Cutting width: 300 mm Control: NC Cutting capacity at 90° – flat: 330 x 260 mm Cutting capacity at 90° – square: 260 x 260 mm Cutting capacity at 45° – square: 250 mm Cutting capacity at 45° – flat: 270 x 200 mm Cutting capacity at 60° – round: 180 mm Cutting capacity at 60° – square: 170 mm Band speed: 15 – 100 m/min Total power requirement: 2.2 kW Machine weight approx. 1.1 t Space requirement approx. 3.3 x 2.83 x 2.23 m Equipment/features: Dwjdpfx Agjfg E H Ee Iob - Electrohydraulic fully automatic band saw with additional semi-automatic, semi-automatic dynamic, and manual operation modes - Automatic cycle (cuts from 0° to 60° to the left) - Semi-automatic, semi-automatic dynamic, and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle allows cuts outside of series production to be made directly without programming - Numerically controlled band saw with new, specially developed Windows CE-based control system from MEP for automatic machines - User interface with 7" touchscreen display and mechanical buttons for machine operation functions - Infinitely variable cutting speed adjustment from 15 to 100 m/min via frequency inverter (VFD) - Material feed with stepper motor via ball screw spindle – mounted on opposing ball bearings; single stroke 600 mm - Repeatable strokes for cutting any length - Automatic monitoring of cutting force via a servo valve mounted directly on the cylinder - Coolant tray integrated in the machine base - Swarf removal brush - Bimetal band saw blade for solid and profile material - Tool kit and user manual with spare parts list

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, Charakteristikos Staklės tipas: automatinis CNC juostinis pjūklas Dwjdpfx Agszkubus Ieb Pjovimo kampas: 0° (tiesus pjūvis) Maksimalus apvalaus profilio skersmuo: Ø 300 mm Maksimalus kvadratinio profilio skersmuo: 250 × 250 mm Maksimalus stačiakampio profilio skersmuo: 330 × 250 mm Pjovimo ašmenų matmenys: 3650 × 27 × 0,9 mm Pjovimo ašmenų variklis: 2,2 kW trifazis Pjovimo ašmenų greitis: kintamas, maždaug 15–100 m/min, reguliuojamas keitikliu Maksimalus griebtuvo atidarymas: 335 mm Stirnos padavimas: automatinis CNC, su padavimo griebtuvu Maitinimas: 400 V trifazis (50 Hz) Darbo režimai: rankinis, pusiau automatinis ir programuojamas automatinis

Būklė: geras (naudotas), Gamybos metai: 2018, Naudota, dalinai automatinė juostinė pjovimo staklė „MEP“. Dsdpfxjzyvdij Ag Ijwb Tipas: Shark 282 SXI evo Pagaminimo metai: 2018 Sukimosi greičio diapazonas: 36/72 m/min. Pjovimo juostos matmenys: 2950 x 27 x 0,9 mm Bendrasis galių poreikis: 1,5 / 1,8 kW Staklės svoris: apie 470 kg Maksimalus pjovimo skersmuo: 250 mm Pjovimo diapazonas esant 90 laipsnių kampui: plokščia detalė 280 x 220 mm Pjovimo diapazonas esant 90 laipsnių kampui: kvadratinė detalė 220 x 220 mm Pjovimo diapazonas esant 45 laipsnių kampui: plokščia detalė 220 x 200 mm Pjovimo diapazonas esant 45 laipsnių kampui: apvali detalė 230 mm Pjovimo diapazonas esant 45 laipsnių kampui: kvadratinė detalė 200 x 200 mm Pjovimo diapazonas esant 60 laipsnių kampui: plokščia detalė 140 x 100 mm Pjovimo diapazonas esant 60 laipsnių kampui: kvadratinė detalė 100 x 100 mm Pjovimo diapazonas esant 60 laipsnių kampui: apvali detalė 150 mm #

Būklė: naujas, 2 speeds: 36/72 m/min Cutting capacity at 90°: round 300 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: flat 330x260 mm Dwsdpfx Agjyv Nmlj Iob Cutting capacity at 60°: round 180 mm Cutting capacity at 60°: square 170 mm Cutting capacity at 60°: flat 170x170 mm Cutting capacity at 45°: round 260/200 mm Cutting capacity at 45°: square 250/180 mm Cutting capacity at 45°: flat 270x200/200x160 mm Saw blade dimensions: 3650x27x0.9 mm Total power requirement: 1.5/1.8 kW Machine dimensions: 2130x1400x1950 mm Weight: 670 kg Electro-hydraulic, semi-automatic bandsaw with semi-automatic dynamic/manual operation. Equipped with an MEP-30 controller for mitre cuts from 45° right to 60° left. MEP 30 is the latest generation of controller. Semi-automatic function: - Vice closes and motor starts - Saw head lowers to perform the cut - Motor switches off - Saw head rises - Vice opens Semi-automatic dynamic system: - Manual lowering of the saw bow to the desired position - Cycle start via hand button - Upper position is stored automatically Main features: - Hydraulic unit with high-efficiency electric valve and high-pressure hydraulic pump (200 bar) - Electronic machine control with new generation micro-controller - Electrical system centralised in the main switch cabinet - Display of alarms, diagnostics, and machine functions (cutting time, number of pieces cut, saw blade motor current draw, saw head position, blade speed, blade tension) - Manual/semi-automatic/dynamic function included as standard Some features: - Operating panel with low voltage: polyester membrane keypad with thermoformed, raised push buttons and acknowledgment control signal - IP55 manual cycle lever, 24 V - Complete program for all special cutting cycles - New hydraulic controller with low energy consumption, standby operation - Turntable on 420 mm roller bearing with preloaded thrust bearing and replaceable steel work table - Saw bow lift travel programmable directly from the control panel for adapting to different cutting materials - Clamping device adjustable laterally to the left and right, with quick-action vice - Manual blade tension control with on-screen display via electronic converter

Gamybos metai: 2003, būklė: naudotas, Cutting capacity – Round: 300 mm Saw blade dimensions: 3320 x 27 x 0.9 mm Cutting capacity – Rectangle: 330 x 260 mm Cutting capacity – Square: 260 mm Control system: Evolution Dwsdpfx Aera Rrlog Ieb Working height: 870 mm Saw blade speed: 40 / 80 m/min Machine weight: approx. 1050 kg

Būklė: naujas, modelio pavadinimas Dwedpfogvkafex Ag Ieb Shark 332-1 SXI evo

Būklė: naujas, Cutting diameter: 300 mm Cutting capacity at 90°: flat 330 x 260 mm Cutting capacity at 90°: square 260 x 260 mm Cutting capacity at 45°: flat 270 x 200 mm Cutting capacity at 45°: round 260 mm Cutting capacity at 45°: square 250 x 250 mm Cutting capacity at 60°: flat 170 x 170 mm Cutting capacity at 60°: square 170 x 170 mm Cutting capacity at 60°: round 180 mm Blade speed range: 40 / 80 m/min Saw blade dimensions: 3650 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Equipment: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIAL) - Capable of mitre cuts from 45° right up to 60° left * Mitre setting via large turntable - MEP EVO microprocessor control for managing all functions * Located front-right, pivotable - Option for manual or automatic saw arm descent * Infinitely adjustable descent speed of the saw frame - Saw band guides made of carbide plates - Hydraulic saw band tensioning including digital value display - 2x bandsaw speeds - 1x bi-metal bandsaw blade - 1x angle stop - Chip removal brush - Machine base with forklift pockets - Operating manual in German Functionality in semi-automatic mode: - Electro-hydraulic vice clamping - Electro-hydraulic saw frame lowering - Electro-hydraulic saw frame lifting - Electro-hydraulic vice opening Dsdpfxexaagbo Ag Iowb SPECIAL ACCESSORY INCLUDED: - MEP LubeCut micro-dosing system

Būklė: naujas, Cutting diameter: 300 mm Cutting capacity at 90° (flat): 330 x 260 mm Cutting capacity at 90° (square): 260 x 260 mm Cutting capacity at 45° (round): 260 mm Cutting capacity at 45° (flat): 270 x 200 mm Cutting capacity at 60° (round): 180 mm Cutting capacity at 60° (flat): 170 x 170 mm Material support height: 600 mm Feed min/max: 50,000 mm Vice opening: 335 mm Blade speed: 15 - 100 m/min Automatic feed: 600 mm Saw blade dimensions: 3650 x 27 x 0.9 mm Total power requirement: 2.2 kW Weight: 1,105 kg Dimensions (L x W x H): 3.3 x 2.83 x 2.23 m electro-hydraulic fully automatic band saw, with additional: * semi-automatic * semi-automatic dynamic * manual operation Description: - Robust electro-hydraulic fully automatic band saw (INDUSTRIAL) * MEP WINDOWS numerical control unit * User interface with 7” touch screen display * Mechanical buttons for machine operation functions * Guarantees reliable operation, simple and intuitive * Real-time monitoring of all cutting parameters * Swiveling arm allows convenient and safe operation * Display and logging of alarm and error messages - Mitre cuts in automatic cycle from 0° to 60° left - Semi-automatic, semi-automatic dynamic and manual cycles * Mitre cuts from 45° right to 60° left - Manual or semi-automatic dynamic cycle selectable * to perform cuts without programming - Protective enclosure for worker safety - Continuously variable cutting speed from 15 to 100 m/min * via frequency inverter - Latest generation hydraulic unit * highly efficient with low energy consumption - Material feed with stepper motor via ball screw spindle * mounted on opposing ball bearings * 600 mm single stroke, repeatable for any length cut - Positioning of saw head and movement of feeder via joystick - Automatic detection of cut start position - Manual blade tension monitoring with display indication * via electronic transducer - Automatic monitoring of cutting load * via servo valve mounted directly on the cylinder - Coolant tray integrated in the base frame - Chip removal brush - Bimetal saw blade for solid and profile materials - Tools and operating manual with spare parts list Dwjdpfx Ajxab S Eeg Isb * Angular accuracy = 2/12 degrees * Length accuracy = plus/minus 0.1 mm per feed stroke SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing system

Būklė: naujas, Saw blade diameter: 350 mm Cutting capacity at 90 degrees: round 120 mm Cutting capacity at 90 degrees: square 105 mm Cutting capacity at 90 degrees: flat 180 x 70 mm Dwjdpfsfg Rlgex Ag Ieb Cutting capacity at 45 degrees: round 120/110 mm Cutting capacity at 45 degrees: square 10/95 mm Cutting capacity at 45 degrees: flat 135 x 60 mm Motor: 2.5 kW Speed: 1700 / 3400 rpm Machine weight: approx. 600 kg Dimensions (L x W x H): 2.0 x 1.5 x 1.7 m COBRA 352 NC 5.0, automatic circular saw with semi-automatic function, designed for sawing aluminium and light metal alloys using carbide-tipped circular saw blades. The machine is capable of mitre cuts from 45° right to 45° left. By adjusting the vertical orientation, it is possible to perform cutting operations with the head inclined between 0° and 45° to the left. Numerically controlled circular saw equipped with a new Windows CE-based control unit, specifically developed by MEP for automatic machines.

Būklė: geras (naudotas), Gamybos metai: 2015, 1 naudota kampiniu pjūklų juostinė pjovimo staklė Gamintojas: MEP Modelis: Shark 512 SXI EVO Pagaminimo metai: 2015 Techniniai duomenys: Tipas: pusiau automatinė dvigubo kampo metalo juostinė pjovimo staklė Kampo reguliavimo diapazonas: –60° iki +60° Maksimalus pjovimo dydis esant 0° kampui: 510 × 320 mm Pjovimo juostos matmenys: 4 640 × 34 × 1,1 mm Juostos greitis: 15–100 m/min (reguliuojamas be pakopų) Variklio galia: 4,0 kW Dwedpfx Aezlgmljg Ieb Griebtuvo atidarymo plotis: 515 mm Staklės svoris: apie 1 190 kg su įvairiais ritininiais takais

Būklė: naudotas, Gamybos metai: 2019, Pjovimo skersmuo: 250 mm Pjovimo plotis esant 90° kampui: plokščias – 280 x 220 mm Pjovimo plotis esant 90° kampui: kvadratinis – 220 x 220 mm Pjovimo plotis esant 45° kampui: plokščias – 220 x 200 mm Pjovimo plotis esant 45° kampui: apskritas – 230 mm Pjovimo plotis esant 45° kampui: kvadratinis – 200 x 200 mm Pjovimo plotis esant 60° kampui: plokščias – 140 x 100 mm Pjovimo plotis esant 60° kampui: kvadratinis – 100 x 100 mm Pjovimo plotis esant 60° kampui: apskritas – 150 mm Staklės: 285 mm Greičio diapazonas: 36/72 m/min Juostos pjūklo matmenys: 2950x27x0,9 mm Bendrasis galingumo poreikis: 1,5 / 1,8 kW Mašinos svoris: apie 460 kg Reikiamas plotas: apie 1150 x 1970 mm Dwjdpfx Aozvhkmeg Isb Įranga: - tvirta elektrohidraulinė pusiau automatinė juostinio pjūklo mašina (skirta pramoniniam naudojimui) - galimybė atlikti kampinius pjūvius nuo 45° į dešinę iki 60° į kairę * Kampo nustatymas naudojant didelį sukamo diską - MEP mikroprocesorinis valdiklis EVO, skirtas visų funkcijų valdymui * priekyje, dešinėje, sukamasis - galima pasirinkti rankinį arba automatinį pjovimo galvutės nuleidimą * bepakopinis pjovimo galvutės nuleidimo reguliavimas - pjovimo galvutės kreiptuvas iš kietojo lydinio plokščių - hidraulinė juostos įtempimo sistema – įskaitant skaitmeninį rodmenų ekraną - 2 pjovimo greičiai - aušinimo sistemos įrenginys - 1 kampinis atraminis stabdis - drožlių šalinimo šepetys - mašinos pagrindas su kišenėmis šakių krautuvui - naudojimo instrukcija vokiečių kalba - atsarginiai pjovimo juostos Pusiau automatinio režimo veikimo principas: - elektrohidraulinis staklių užspaudimas - elektrohidraulinis pjovimo galvutės nuleidimas - elektrohidraulinis pjovimo galvutės pakėlimas - elektrohidraulinis staklių atidarymas *Papildoma įranga: - 2000 mm ilgio tiekiamasis ritminis konvejeris - 2000 mm ilgio išleidžiamasis ritminis konvejeris su atraminiu stabdžiu

Būklė: naujas, Cutting diameter: 300 mm Cutting capacity at 90° (flat): 330 x 260 mm Cutting capacity at 90° (square): 260 x 260 mm Djdpfsxabavox Ag Ijwb Cutting capacity at 45° (round): 260 mm Cutting capacity at 45° (flat): 270 x 200 mm Cutting capacity at 60° (round): 180 mm Cutting capacity at 60° (flat): 170 x 170 mm Material support height: 600 mm Feed min/max: 50,000 mm Vice opening: 335 mm Band speed: 15 - 100 m/min Automatic feed: 600 mm Saw blade dimensions: 3650 x 27 x 0.9 mm Control: MEP CNC Total power requirement: 2.2 kW Weight: 1,105 kg Dimensions (L x W x H): 3.3 x 2.83 x 2.23 m electro-hydraulic fully automatic band saw, additionally featuring: * semi-automatic * semi-automatic dynamic * manual operation Description: - Robust electro-hydraulic fully automatic bandsaw (INDUSTRIAL) * MEP - WINDOWS numerical control unit * User interface with 7” touch screen display * Mechanical keys for saw operation functions * Ensures reliable operation, simple and intuitive * Real-time monitoring of all cutting parameters * Swivelling arm for convenient and safe operation * Display and recording of alarm and error messages - Mitre cuts in automatic cycle from 0° to 60° to the left - Semi-automatic, semi-automatic dynamic, and manual cycles * Mitre cuts from 45° right up to 60° left - Choice of manual or semi-automatic dynamic cycle * For performing cuts without programming - Safety enclosure for operator protection - Infinitely variable cutting speed from 15 to 100 m/min * Via frequency inverter - Latest generation hydraulic unit * High-performance with low energy consumption - Material feed by stepper motor with ball screw spindle * Mounted on opposing ball bearings * Single stroke 600 mm, repeatable for any length - Saw head positioning and feeder movement via joystick - Automatic detection of cutting start position - Manual blade tension control with display readout * Using electronic converter - Automatic monitoring of cutting load * By servo valve mounted directly on cylinder - Coolant tray integrated into base frame - Chip removal brush - Bi-metal saw blade for solid and profile materials - Tool kit and instruction manual with spare parts list * Mitre accuracy: 2/12 degrees * Length accuracy: plus/minus 0.1 mm per feed stroke Manufacturer’s note - please observe: When installing this saw in a network with residual current circuit breaker (RCCB), it must be all-current sensitive (Type B) and rated not less than 300 mA.

Būklė: naudotas, Gamybos metai: 2019, MEP „Tiger 352 SX EVO“ – metalo pjovimo staklės, 4000 mm ilgio ritminis konvejeris su galinės padėties reguliavimu, svoris – 410 kg. Serijos numeris: 562821/31B (2019). Vieta: Šie įrenginiai yra Burton-on-Trent mieste, Jungtinėje Karalystėje. Deja, vietoje nėra krovimo įrangos, todėl išmontavimas ir pakrovimas bus atliekami pirkėjo sąskaita. Dwjdpfx Ajzr I Ahjg Isb

Būklė: naujas, Pjovimo skersmuo: 300 mm Pjovimo diapazonas esant 90° kampui: plokščias – 330 x 260 mm Pjovimo diapazonas esant 90° kampui: kvadratinis – 260 x 260 mm Pjovimo diapazonas esant 45° kampui: plokščias – 270 x 200 mm Pjovimo diapazonas esant 45° kampui: apskritas – 260 mm Pjovimo diapazonas esant 45° kampui: kvadratinis – 250 x 250 mm Pjovimo diapazonas esant 60° kampui: plokščias – 170 x 170 mm Pjovimo diapazonas esant 60° kampui: kvadratinis – 170 x 170 mm Dedexaav Aspfx Ag Iewb Pjovimo diapazonas esant 60° kampui: apskritas – 180 mm Sūkių diapazonas: 40 / 80 m/min Juostos pjūklo matmenys: 3650 x 27 x 0,9 mm Valdymo sistema: MEP Variklio galia: 1,5 / 1,8 kW Svoris: 670 kg Įranga: - tvirtas elektrohidraulinis pusiau automatinis juostinis pjūklas (skirtas pramoniniam naudojimui) - su galimybe atlikti 45° kampo pjūvius dešinėje pusėje ir 60° kampo pjūvius kairėje pusėje * Kampo nustatymas naudojant didelį sukamo disko mechanizmą - MEP mikroprocesorinė valdymo sistema EVO, skirta valdyti visas funkcijas * esanti priekyje dešinėje pusėje, pasukama - galima pasirinkti: rankinis arba automatinis pjovimo galvutės nuleidimas * bepakopinis pjovimo galvutės nuleidimo reguliavimas - juostos pjūklo kreiptuvas, pagamintas iš kieto lydinio plokščių - hidraulinis juostos pjūklo įtempimas – įskaitant skaitmeninį rodiklį - 2x juostos pjūklo greičiai - 1x BI-metalinis juostos pjūklas - aušinimo sistema - 1x kampinis atraminis blokas - drožlių valymo šepetys - mašinos pagrindas su šakinių krautuvų kišenėmis - naudojimo instrukcija vokiečių kalba Pusiau automatinio veikimo principas: - elektrohidraulinis tvirtinimo mechanizmas - elektrohidraulinis pjovimo galvutės nuleidimas - elektrohidraulinis pjovimo galvutės pakėlimas - elektrohidraulinis tvirtinimo mechanizmo atidarymas

Būklė: geras (naudotas), Gamybos metai: 2014, Cutting range 300 mm Cutting range at 90 degrees: flat 330 x 260 mm Cutting range at 90 degrees: square 260 x 260 mm Cutting range at 45 degrees: round 260 mm Cutting range at 45 degrees: flat 270 x 200 mm Cutting range at 45 degrees: square 250 mm Cutting range at 60 degrees: round 180 mm Cutting range at 60 degrees: flat 170 x 170 mm Cutting range at 60 degrees: square 180 mm Automatic feed 9,999.9 mm Minimum feed 2.0 mm Minimum cutting diameter 5.0 mm Band speed 15 – 100 m/min Vice, opening 340 mm Saw blade dimensions 3650 x 27 x 0.9 mm Control MEP CNC Total power requirement 2.2 kW Weight 1240 kg Dimensions (L x W x H) 1800 x 1900 x 1750 mm Current list price approx. €23,000 Special price on request Equipment: - Robust electro-hydraulic fully automatic band saw (INDUSTRIAL) - With additional semi-automatic function, for cuts from 0° to 60° to the left - WINDOWS “CE” based MEP 50 control and 7” touch-screen display * Simple and fast setup of all machine parameters * With additional soft keys and backlit display * 10 programs, each with a maximum of 9,999 pieces and max. 9,999.9 mm in length - Material feed with stepper motor via ball screw spindle * Single stroke 600 mm repeatable for cutting any length * Accuracy of ±0.1/600 mm - Feeder with guard cover and safety limit switch Dodpfezkbn Uex Ag Iewb - Precise adjustment of feed rate displayed in mm/min - Positioning of saw head and movement of feeder via joystick - Automatic detection of cutting start - Large, adjustable cast steel band pulleys - Blade tensioning with tension monitoring and display readout - Carbide blade guides for maximum cutting precision - Automatic monitoring of cutting load - Quick-adjust vice * With interchangeable clamping and stop jaws - Large, laterally extendable chip tray and coolant tank * Equipped with 2 electric pumps for saw blade lubrication and cooling * Coolant gun for cleaning the machine - Chip removal brush for cleaning the blade - Operating manual in German Manufacturer information: When installing this saw into a mains system with a residual current circuit breaker (RCCB), this must be all-current sensitive and not less than 300 mA.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, „Datacon 2200 EVO“ (3-iosios kartos) „Datacon“ sukurtas prietaisas, skirtas plokštelių (angl. die) surinkimui / kelių lustų montavimui (angl. multi-chip assembly). („Besi.“) Plokštelių pritvirtinimas, kelių lustų ir „flip-chip“ technologijų taikymas. Padėties tikslumas: ±10 µm esant 3σ „Theta“ kampas: ±0,15° esant 3σ Pritvirtinimo jėga: 0,5–75 N Iki 4 darbinės galvutės Plokštelių apdorojimas iki 12 colių Plokštelių pritvirtinimas iki maždaug 7 000 vnt./val./modulis „Flip-chip“ technologija – iki 2 500 vnt./val. su panardinimu Šildoma pritvirtinimo galvutė iki 450 °C Pagrindo plotas iki 325 × 200 mm Svoris – apie 1 300 kg. Dedpfey S S Uwox Ag Iowb

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2017, Used automatic circular saw for aluminium MEP Cobra 352 NC 5.0 Year of manufacture: 2017 Blade dimensions: 350x32x3.4 mm Blade cutting speed: 1700/3400 rpm Dwsdpfxowu Tz Rs Ag Ieb Mitre angle: from -45° to +45° Cutting capacity: at 0°: round: 120 mm, square: 105 mm, rectangle: 180x70 mm Touchscreen display Machine weight: 605 kg

Būklė: naudotas, Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 352 NC EVO, Circular saw automaton with semi-automatic operation, designed for cutting aluminium and light metal alloys, suitable for use with carbide-tipped circular saw blades. Includes extraction unit and material handling (roller conveyors). Dwsdpfx Agev T U Tgs Ijb Machine capable of mitre cuts from 45° right to 45° left. Thanks to the vertical axis orientation, it is possible to perform saw operations with the head tilted between 0° and 45° to the left.

Būklė: naudotas, Gamybos metai: 2009, Didelė tvirta pjovimo staklė žinomo gamintojo MEP SHARK CCS HYDRA Djdpey Ani Eofx Ag Iowb - pilnas pusiau automatas - strypo pjovimo skersmuo 300 mm - gabaritai 320x260 mm - pasukimas KAIRĖN/DEŠINĖN - pjovimo juosta 3320x27x0,9 mm - aušinimo skysčio siurblys - automatinis spaustuvo prispaudimas - įrenginio svoris 700 kg - originalus ritininis stalas (100 kg) - komplekte 3 naujos pjovimo juostos - originali dokumentacija Originali mašina, labai geros techninės būklės, paruošta darbui. Galima apžiūrėti Głoskówe, netoli Varšuvos.

Būklė: naudotas, Gamybos metai: 2021, Saw blade diameter: 370x32x3 mm 4 speeds: 15-150 rpm Vice opening: 190 mm Cutting capacity at 90°: round 120 mm Cutting capacity at 90°: square 110 mm Cutting capacity at 90°: flat 180x100 mm Cutting capacity at 60° left: round 115 mm Cutting capacity at 60° left: square 90 mm Cutting capacity at 60° left: flat 90x90 mm Dodpfjyvvpasx Ag Ijwb Cutting capacity at 45° left: round 115 mm Cutting capacity at 45° left: square 100 mm Cutting capacity at 45° left: flat 120x100 mm Cutting capacity at 45° right: round 115 mm Cutting capacity at 45° right: square 100 mm Cutting capacity at 45° right: flat 120x100 mm Total power requirement: 5.5 kW Weight: 615 kg Machine dimensions: 1400x1400x2000 mm Electropneumatic – Semi-automatic vertical circular saw with microprocessor control for mitre cuts from 60° left to 45° right. Standard equipment: - Saw head glides on ball bearing linear double guides - Three-stage gearbox - Infinitely variable speeds 15-150 rpm - Vice jaw opening: 190 mm - Saw head stroke programmable directly from the control panel for adaptation to material being cut - Pneumatic vertical vice - HSS DMO 5 saw blade Ø 370x32x3 for solid and profile material - Vice with counterclamping device for double workpiece clamping - Base frame with removable coolant tray - Chip removal brush - Length stop for identical length cuts - Material support arm, additionally prepared for roller conveyor / loading side connection - The machine is designed for pallet truck transport - Includes tools and operating manual Electrical equipment: - Control panel - Clearly marked cable connections - Indicator lamp for operational readiness - Main safety switch - LED check display on control panel for monitoring machine functions - Emergency stop button - Speed selector switch - Thermal-magnetic protection - Undervoltage release - Control handle, protection class IP 55 - Low-voltage system 24 V - Electric coolant system for lubrication and cooling of the saw blade (option for installation of a micro-spray system) - Motor 5.5 kW – 400 Volt