Mammut 200 Liter Druck-Sandstrahlgerät Mit Quick-Stop Sicherheitsabschaltung pirkti naudotą (40 772)

Būklė: naujas, Gamybos metai: 2025, Our SAPI pressure blasting unit, type "Mammut" with a 200-liter vessel capacity, is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar via the permanently installed pressure regulator. A water separator is also permanently fitted to the blasting unit, which removes moisture from the compressed air and prevents the blasting media from clumping due to excessive humidity. For safe operation of the sandblasting unit, our safety shut-off system is included. This starts and stops the blasting process via the hand lever mounted on the blasting hose. Scope of delivery includes: - SAPI pressure blasting unit "Mammut 200 L" - Pressure regulator 1 1/4", permanently fitted - Water separator 1 1/4", permanently fitted - SAPI safety shut-off system Technical data – pressure blasting unit: - Precisely adjustable from 0.1 – 12 bar - TÜV-tested with certificate - Fixed piping 1 1/4" internal and external - Rubber-coated metal cone with rubber seal - Large handhole opening - Chassis with rubber wheels - Blasting media dosing valve (suitable for all common blasting media) - Capacity: 200 l - Overall height: 1,420 mm - Vessel diameter: 600 mm - Overall diameter: 1,000 mm Cjdpjwc Rk Esfx Ag Isrg - Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with Safety Shut-Off - Fastest on/off switching times in compliance with trade association regulations (VBG 48) - The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar - Reduced consumption of blasting media, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on - Upon restarting, full blasting pressure is immediately available at the nozzle – no pressure build-up required → lower consumption & reduced hose wear - No condensate formation in the vessel, as it remains permanently pressurized → no venting required for each start/stop - Optimum media dosing with hardened fine dosing valve - Less compressed air requirement → noticeably lower diesel consumption - One-person operation, as the pressure is shown and can be adjusted directly at the manometer – even without starting - No components susceptible to failure such as control valves, membranes, or seals → easy maintenance and high operational safety - Only the blasting hose in the safety shut-off needs to be checked and, if necessary, replaced

Būklė: naujas, Gamybos metai: 2025, Our SAPI pressure blasting unit type "Mammut" with a 100-liter vessel capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the integrated pressure regulator. The unit is also equipped with a permanently installed water separator that removes moisture from the compressed air and prevents the blasting media from clumping due to excessive humidity. For safe operation of the sandblasting unit, our safety shut-off system is included. It starts and stops the blasting process by operating the hand lever mounted on the blasting hose. The pressure blasting unit is delivered fully operational and space-saving, pre-mounted in a mesh box. All that is required is to connect the compressed air supply and fill with blasting media. Transport can be easily handled using a forklift or pallet truck. For protective clothing, spare parts, etc., a lockable aluminium storage box is mounted on the unit. Scope of delivery includes: - SAPI pressure blasting unit "Mammut 100 L" - 1" pressure regulator, permanently installed - 1" water separator, permanently installed - SAPI safety shut-off system - Blasting media sieve - Lid - 10 m blasting hose ø 25x7 mm, fully assembled - Silicon carbide venturi long nozzle, selectable diameter: 6 mm, 8 mm or 10 mm - Sandblasting helmet RED 2 - Sandblasting overall, nylon/cotton - 1 pair of leather blasting gloves - 10 m breathing air hose, fully assembled - Breathing air filter/activated carbon filter SAF - Wear parts kit consisting of: - 100 tear-off visors for RED 2 - 10 inner lenses for RED 2 - 1 blasting hose coupling 25x7 mm nylon - 2 rubber seals for the hose coupling Crsdpfxswc Ri Ij Ag Iog - 1 nozzle holder 25x7 mm - Mesh box with blasting hose holder - Lockable aluminium box Technical data for the pressure blasting unit: - Precisely adjustable from 0.1 to 12 bar - TÜV tested with certificate - Fixed 1" piping inside and outside - Rubber-coated metal cone with rubber gasket - Large hand hole - Chassis with rubber wheels - Blasting media dosing valve (suitable for all common blasting media) - Capacity: 100 l - Overall height: 1,130 mm - Vessel diameter: 490 mm - Overall diameter: 900 mm - Weight approx. 75 kg Dimensions mesh box: - Length: 1,460 mm - Width: 840 mm - Height: 1,400 mm - Total weight incl. all accessories: 260 kg

Būklė: naujas, Our SAPI pressure blasting unit type "Mammut" with a 60-litre tank capacity is suitable for all common blasting media. The blasting pressure can be infinitely adjusted from 0.1 to 12 bar via the permanently installed pressure regulator. The unit also features a permanently mounted water separator, which extracts moisture from the compressed air and thus prevents the blasting media from clumping due to excessive humidity. Cjdpswc Afhsfx Ag Iorg For safe operation, our safety shut-off system is included. This allows starting and stopping of the blasting process via an operating lever mounted on the blasting hose. Delivery includes: - SAPI pressure blasting unit "Mammut 60 L" - Pressure regulator 1", permanently installed - Water separator 1", permanently installed - SAPI safety shut-off system Technical specifications pressure blasting unit: - Precisely adjustable from 0.1 to 12 bar - TÜV certified with certificate - Fixed 1" piping, internal and external - Rubber-coated metal cone with rubber seal - Generously sized hand hole - Chassis with rubber wheels - Blasting media dosing valve (suitable for all common blasting media) - Capacity: 60 l - Overall height: 1,130 mm - Vessel diameter: 360 mm - Total diameter: 700 mm - Weight: approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT WITH SAFETY SHUT-OFF: - Extremely fast switching on and off times, complying with industrial safety regulations (VBG 48) - Pressure setting can be fine-tuned accurately prior to blasting, infinitely adjustable from 0.1 – 12.0 bar - Lower blasting media consumption, as the pressure vessel remains constantly pressurized and thus no unnecessary media run-on occurs - Upon restarting, full blasting pressure is immediately available at the nozzle, eliminating delay; this results in significantly lower media consumption and reduced wear on the blasting hose - No moisture formation (condensate) in the vessel, as it remains continuously pressurized, avoiding ventilation during each start and stop; this procedure offers additional benefits: - Optimal blasting media dosing with hardened fine adjustment valve - Reduced compressed air demand, significantly lowering fuel (diesel) consumption - Single-person operation, as the vessel pressure is continuously displayed and can be conveniently adjusted via the pressure gauge without prior startup - No failure-prone components such as control valves, membranes, or seals, resulting in high operational reliability and low maintenance. Only the hose in the safety shut-off needs to be inspected and replaced if necessary.

Būklė: naujas, The SAPI Mammut sandblasting units with QUICK STOP™ system are powerful industrial sandblasting machines used in various sectors such as automotive, construction, and manufacturing. These systems are engineered for fast and efficient surface preparation, cleaning, and treatment of metal, concrete, and other substrates. The SAPI QUICK STOP™ device is a safety feature designed to prevent accidents and damage to the unit. It operates by immediately stopping the blasting process as soon as the operator releases the control handle, instantly cutting off the abrasive flow. This safety system helps prevent workplace accidents and protects the machine from damage caused by overuse. Efficiency and Durability The QUICK STOP™ system reduces air and fuel consumption, resulting in a more efficient and cost-effective sandblasting process. The Mammut sandblasting machine is robustly constructed from high-quality components, ensuring reliable operation even in the harshest environments. All of our machines are fully CE- and TÜV-compliant. Flexibility and Versatility The machine is available in various tank sizes to accommodate different blasting requirements. A wide range of abrasive materials can be used, from regular sand to special plastic or metallic media. Our Mammut with QUICK STOP™ is suitable for numerous applications including surface preparation, cleaning, and the removal of rust, paint, and coatings. Cjdpfxsupyw Ej Ag Isrg Precision and User-Friendliness Our Mammut with QUICK STOP™ offers precise control and adjustment of the blasting pressure even during operation, delivering consistent results and high accuracy. Additionally, all of our units feature easily accessible inspection and maintenance openings. Safety The QUICK STOP™ system with a deadman control handle ensures maximum safety during blasting operations. QUICK STOP™ also prevents moisture buildup inside the machine by maintaining constant pressure, even when blasting is stopped – a clear advantage over standard on/off systems. All Mammut sandblasting units with QUICK STOP™ come fully equipped as standard. Our packages typically include a blasting hose, nozzle, pressure regulator, moisture separator, abrasive metering valve, and basic personal protective equipment.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 1994, Funkcionalumas: visiškai funkcionalus, „HOFFMANN HT 200“ – gręžtuvas su tvirtinimo įtaisais ir įrankiu, skirto ilgų skylių gręžimui puikios būklės, įranga iš švietimo įstaigos, naudota nedaug, beveik nauja, turi labai nedaug naudojimo žymių. Šia įranga galima frezuoti ilgas skyles ir gręžti skyles tvirtinimo įtaisams. Gręžimo aukštį galima labai tiksliai nustatyti skaitmeniniu indikatoriumi. Komplekte yra 3 grąžtų laikikliai: grąžtams su M10 išorine sriegiuote ir grąžtams, kurių kotas yra 12 mm ir 16 mm. Su papildomomis atramomis, esančiomis kairėje ir dešinėje, kurias galima pasukti ir kurios turi guolinį volelį. Įrangoje yra važiuoklė. Su 2 kampiniais stabdikliais ant įrangos stalo, skirti kairiajai ir dešiniajai pusei. Spaustuvai yra reguliuojami ir perkeliama. 380 V, 1400 ir 1800 W, dėl 2 greičio diapazonų. 1400 ir 2850 aps./min. Pagaminimo metai: 1994. Svoris: apie 280 kg. Šia įranga galima frezuoti ilgas skyles, pavyzdžiui, užraktų dėžėms ir panašiems elementams, arba gaminti visų tipų rėmų jungtis tvirtinimo įtaisais, stačiu kampu, tiesiai ir kampiniu būdu. Idealiai tinka tvirtinimo įtaisų jungčių gamybai medinių rėmų konstrukcijose, baldų, durų, langų ir laiptų gamyboje bei panašiems darbams. Gręžimo įrenginys gali būti pasuktas abiem pusėmis iki 65°, o esant 0° kampui yra fiksavimo sistema, todėl šia įranga galima lengvai įgręžti turėklų strypus į laiptų šonus. Dėl 2 greičio diapazonų galima naudoti grąžtus su dideliu skersmeniu, nepažeidžiant įrankio gręžimo metu. Dėl fiksavimo sistemų ir stabdiklių bei įrangos konstrukcijos, tvirtinimo įtaisų jungtys gaminamos greitai, todėl įranga yra labai ekonomiška. Įrangai reikia suspausto oro tiekimo, 6 bar (oro sunaudojimas yra labai mažas). Sukasi į dešinę. Labai gerai ir švariai frezuoja ir gręžia. Darbo detalė tvirtinama 2 pneumatiniais cilindrais, valdomais kojiniu pedalу. Dėl linijinio lazerio, esančio viršuje, galima greitai ir tiksliai gręžti pažymėtas skyles ir nustatyti kampą. Su tikslios 12 mm fiksavimo linija, kurioje yra vidurinė fiksavimo sistema ir 13 fiksavimo taškų kairėje ir dešinėje. Csdpoyy Rtzjfx Ag Iorg Darbo spindulys: maks. 330 mm. Maks. skylės aukštis yra 90 mm. Maks. skylės gylis yra 200 mm su stabdikliu. Maks. darbo detalės aukštis yra 150 mm. Viskas veikia puikiai. Su instrukcija. Įrangą pristatysime ir parodysime asmeniškai visoje Vokietijoje už 220,00 eurų. Taip pat galimas pristatymas į Austriją ir kitas šalis (kaina pagal susitarimą), todėl pirkdami nepatirsite jokių rizikų. Įrangos stalas yra 1100 mm pločio ir 250 mm gylio. Profesionali įranga, ne iš statybų parduotuvės. Šia įranga galite iš karto pradėti dirbti. Labai stabili ir patvari konstrukcija. Tikslūs kreipiamieji, su rutuliniais guoliais, veikia gerai ir lengvai, sukamasis mechanizmas taip pat veikia labai lengvai dėl rutulinio guolio, fiksavimas užtikrinamas fiksavimo varžtu.

Būklė: geras (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, Mixer-grinder / Meat Mincer Kolbe MWE-32 In good used and fully functional condition. Belt and motor are new. The unit operates on 400 volts, is fully made of stainless steel, comes with mixing paddle, 98 cm Enterprise, workshop tested, ready for immediate use. Loading FD 200, year of manufacture 2009. The machine itself is year 2007. Further details on request. Cjdpfx Ajwcgr Esg Ijrg Payment by cash or prepayment. Sale only to commercial buyers. No warranty, no guarantee.

Būklė: naudotas, tuščias svoris: 6 800 kg, bendras svoris: 36 000 kg, ašių konfigūracija: 3 ašys, pirmoji registracija: 09/2005, pakaba: oras, spalva: kitas, pavaros tipas: kitas, vairuotojo kabina: kitas, emisijos klasė: nėra, Įranga: ABS,

Gamybos metai: 2026, veikimo valandos: 1 h, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level access for pallet trucks and electric pallet jacks MAST VERSION Crodpfoykud Rex Ag Ieg Wrapping height 2,450 mm 99 programs 7" TOUCH display FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% pre-stretch, optionally with more or less pre-stretch available TURNING TABLE / TP Ø1,650 mm / Opening at 6 o'clock - Mast at 12 o'clock (can be adjusted at any time) ARYA system for automatic film application and cutting, incl. infrared remote control

Gamybos metai: 2026, veikimo valandos: 1 h, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: S25MythoSarya05, Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level access for pallet trucks and electric pallet jacks MAST VERSION Wrapping height 2,450 mm 99 programs 7" TOUCH display FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% pre-stretch, optionally with more or less pre-stretch available Credoykuh Nepfx Ag Ieg TURNING TABLE / TP Ø1,650 mm / Opening at 6 o'clock - Mast at 12 o'clock (can be adjusted at any time) ARYA system for automatic film application and cutting, incl. infrared remote control

Gamybos metai: 2025, veikimo valandos: 1 h, būklė: beveik kaip naujas (parodų įrenginys), Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level access for pallet trucks and electric pallet jacks MAST VERSION Wrapping height 2,450 mm Crsdpoyktrtefx Ag Isg 99 programs 7" TOUCH display FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% pre-stretch, optionally with more or less pre-stretch available TURNING TABLE / TP Ø1,650 mm / Opening at 6 o'clock - Mast at 12 o'clock (can be adjusted at any time) ARYA system for automatic film application and cutting, incl. infrared remote control

Gamybos metai: 2026, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: S25Synthesi01, Stretch Wrapper Synthesi TECHNICAL DETAILS Turntable / Base Frame / Ø 2,200 mm Max. pallet size: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (including pallet): 2,200 mm FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH” Pre-stretch ratio set to 200% Film application tension electronically adjustable in the programs in various steps Turntable height 75 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed upwards/downwards Acoustic signal at wrapping start and at cycle end Emergency stop switch according to CE regulations Turntable always stops at the same starting position Anti-fall device for the film carriage Push button for machine power-on, start & stop function, and reset per CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL All function parameters adjustable via display F00 - Display/program lock F02 - Continuously variable turntable speed 5-12 rpm Carriage travel speed upwards and downwards adjustable independently F03 - Carriage travel speed upwards from 1.3 to 5.4 m/min F04 - Carriage travel speed downwards from 1.3 to 5.4 m/min F05 - Number of wraps at pallet base (1 - 10 wraps) F06 - Number of wraps at pallet top (1 - 10 wraps) F09 - Photoelectric cell delay for wrapping height F13 - F16 - Film application tension for bottom & top wraps / ascent & descent adjustable independently F62 - Ergonomic height for film change Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL 6 programmable wrapping cycles F01 - 1 - Cross wrapping (upwards/downwards) F01 - 2 - Single wrapping (upwards only or downwards only) F01 - 3 - Push button for manual functions F10 - F11 - Wrapping cycle with predefined start and stop height F12 - Wrapping to a preset height (disables height detection photoeye) F22 / F23 - Wrapping cycle for top sheet application F29 - Soft start cycle for corner protection F30 - F31 - Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tearing on sharp pallet corners Wrapping cycle with manual or motorized rope forming (optional) Reinforcement cycle via push button Optional: Turntable size up to Ø2,600 mm Mast height up to 3,900 mm Ramp Mounting frame Photoelectric sensor for dark products Film cutting device etc. Further systems available ex-stock Ludwigsburg. Images may contain optional extras subject to surcharge. Csdpfxjykub As Ag Ierg Image similar

Būklė: naujas, Gamybos metai: 2026, Cut-Off and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, Saw tiltable via handwheel and worm gear (back side) Codpfx Agsk H Ic Uj Isrg Saw blade diameter: 520 mm, saw blade bore: 50 mm Blade speed: 2800 rpm 400 volts / 5 kW (S6/40%) motor with brake and automatic star-delta switch g Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees (swiveled): 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees tilted: 140 mm Saw can swivel to one side to approx. 25 degrees for acute angles and tilt left up to 30 degrees for flat angles TCT circular saw blade 520x4.0/2.8x50 mm 60 teeth WZ neg. for wood RLH-ST60 6.0 meter measuring length, mounting side: left Length stop / roller conveyor, heavy-duty design, Stop slider adjustable from operator position via handwheel, electronic-digital measurement display, stop slider pneumatically clamped, flip-away stop flap to the rear, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connection piece: overall length: 6.7 m Surcharge for digital electronic display unit Type: FIAMA EP6 for 230 V mains operation, with electrical on/off switch and socket. Powerful dark red LED display. Higher accuracy compared to battery-powered crystal display RO-ST60 4.0 meter infeed roller conveyor Mounting side: right Heavy-duty design, steel rollers: 60 mm diameter, roller spacing: 200 mm, 400 mm roller width, 3 support feet and connection piece Location: Ex stock 54634 Bitburg - immediately available - Image: similar. Machine is still in its original packaging

Būklė: paruoštas naudoti (naudotas), Įrankių revolveris 5603923WZ su 12 stotelių, skirtas EMAG VSC 200 DUO, gamintojas nežinomas, naudotas, yra įprastų naudojimo žymių, 100% veikiantis, komplektacija pagal nuotraukas. DĖMESIO: Pakuotės ir transportavimo kainą prašome teirautis atskirai! Cjdozu Hvrjpfx Ag Isrg

Būklė: paruoštas naudoti (naudotas), Įrankių bokštelis 5603923WZ SN:1285 su 12 stotelių, skirtas EMAG VSC 200 DUO, gamintojas nežinomas, naudotas, normalūs naudojimo požymiai, 100 % veikiantis, pristatymo apimtis pagal nuotraukas, DĖMESIO: dėl pakavimo ir siuntimo kainos klauskite atskirai! Crodszu Hvxopfx Ag Ieg

Būklė: paruoštas naudoti (naudotas), Įrankių revolveris 5603923WZ SN:1286 su 12 stotelių, skirtas EMAG VSC 200 DUO, gamintojas nežinomas, naudotas, normalūs nusidėvėjimo požymiai, 100% veikiantis, pristatymo apimtis pagal nuotraukas. DĖMESIO: dėl pakavimo ir transportavimo kainų prašome teirautis atskirai! Crjdpezu Hv Eefx Ag Ieg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2013, PAGRINDINĖ INFORMACIJA Talpa ir darbo plotas • Modelis: Mazak Quick Turn Smart 200 • Valdymas: Mazatrol Smart • Pagaminimo metai: 2013 • Serijos numeris: 249187 • Bendras darbo laikas: 11 755 val. • Faktinis apdirbimo laikas: 1 561 val. • Tinklas: LAN jungtis • Būklė: Staklės yra labai geros techninės būklės, švarios, tikslios ir puikiai prižiūrimos. • Maksimalus apdirbimo skersmuo: 530 mm • Maksimalus apdirbimo skersmuo virš skersinio slidės: 343 mm • Maksimalus ruošinio skersmuo: 65 mm • Veleno skersmuo: 76 mm Crjdpfxszwhc Ej Ag Isg • Ašių judėjimo diapazonas: X ašis: 195 mm Z ašis: 560 mm • Greitasis judėjimas: X ašis: 30 000 mm/min Z ašis: 33 000 mm/min Velenas ir įrankiai • Veleno greitis: 5 000 aps./min. • Veleno galia: 15 kW • Pasirenkama sriegimo pradžios padėtis • Per įrankį tiekiama aušinamoji skystis • Įrankių lizdas: 12 padėčių Indeksavimo laikas: 0,17 sek./1 žingsnis • Atraminis priekinis valdytuvas: MT5 Auto • Įrankių matavimo ranka: Taip • Detalių gaudyklė: Taip • Roboto sąsaja: Papildoma M funkcija (1 pora) • „Smartshift BASE“ greita jungtis: Taip • Tvirtinimo įtaisas: SMW AUTOBLOK Automatizavimas ir papildoma įranga Integruotas automatizavimo sprendimas su UR5e • Modelis: Universal Robots UR5e (skirta tik demonstracijoms) • Tipas: Kolaboracinis robotas (ko-robotas) • Pagaminimo metai: 2021/01 • Būklė: Visiškai integruotas ir veikiantis kartu su „Mazak Smart 200“ • Didžiausia naudinga apkrova: 5 kg • Darbinis spindulys: 850 mm • Pakartojamumas: ±0,03 mm • Darbinis diapazonas: 2,6 m³ • Maksimalus TCP greitis: 1 000 mm/s • Sąnario greitis: 180°/s • Roboto svoris: 21 kg • Montavimas: ant grindų, lubų, sienos arba įstriai • Maitinimas: 100–240 V kintamoji srovė, apytiksliai 200 W • Valdiklis: UR valdymo blokas (E serija) • Programavimas: URScript + grafinis blokinis programavimas • Saugumas: ISO 10218-1, ISO/TS 15066, PLd Cat. 3 • Lauko magistralė: PROFINET, EtherNet/IP, Modbus TCP • Skaitmeniniai įėjimo/išėjimo kanalai: 16 įėjimų / 16 išėjimų • Analoginiai įėjimo/išėjimo kanalai: 2 įėjimai / 2 išėjimai • Įrankio tvirtinimo flanšas: ISO 9409-1-50-4-M6 Integracija su „Smart 200“ • „Smartshift BASE“ greita jungtis • Papildoma M funkcija (roboto sąsaja) • Iš anksto užprogramuotos sekos • Greitas perėjimas tarp rankinio ir roboto valdymo • Vaizdo įrašas, kuriame parodytas veikiantis robotas ir staklės • Visiškai išbandyta ir naudojama gamyboje Būklės aprašymas • Staklės yra visiškai veikiančios ir atitinka visus reikalavimus. • Nėra jokių įspėjimų ar esminių gedimų. • Sklandus judėjimas visomis ašimis. • Velenas veikia sklandžiai, be vibracijos. • Tiesinės kreiptuvės ir sraigtiniai mechanizmai yra geros būklės. • Hidraulinės ir pneumatinės sistemos veikia normaliai. • Reguliariai atliekama techninė priežiūra. • Tepimo sistema veikia tinkamai. • Staklės buvo naudojamos nedidelei gamybai (aliuminis / plastikas). • Robotas ir staklės yra visiškai integruoti ir išbandyti.

Būklė: naudotas, Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, bendras plotis: 90 mm, bendras ilgis: 136 mm, bendras svoris: 200 kg, įėjimo įtampa: 400 V, Įranga: kranas, Parduodamas „Speidel Braumeister“ alaus gamybos įrenginys, talpa 200 litrų, puikios būklės. Įrenginys naudotas, tačiau techniškai ir vizualiai yra labai geros būklės, juo visada buvo rūpinamasi. Informacija: • „Speidel Braumeister“ alaus gamybos įrenginys, talpa 200 litrų • Naudotas, bet labai geros būklės • Idealus pasirinkimas ambicingiems mėgėjams alaus darytojams ir mažesnėms komercinėms alaus darykloms • Vieta: Italija Jei domina arba norite gauti daugiau informacijos, rašykite. Taip pat parduodami įvairūs priedai. Codpfxjzwn U Us Ag Isrg

Būklė: naudotas, didžiausias leistinas svoris: 30 200 kg, bendras svoris: 38 000 kg, ašių konfigūracija: 2 ašys, pirmoji registracija: 01/2021, kita apžiūra (TÜV): 06/2027, bendras plotis: 2 550 mm, bendras aukštis: 3 900 mm, Gamybos metai: 2021, Įranga: ABS,

Būklė: naudotas, didžiausias leistinas svoris: 30 200 kg, bendras svoris: 38 000 kg, ašių konfigūracija: 2 ašys, pirmoji registracija: 11/2020, kita apžiūra (TÜV): 10/2026, bendras plotis: 2 550 mm, bendras aukštis: 3 900 mm, Gamybos metai: 2020, Įranga: ABS,

Būklė: naudotas, Cleaning fluid, coolant for spindle oil cooler, spindle cooling for machining center - Quantity: 9 containers with 200 liters of cleaning fluid each - Price: complete (for all) - Packed on: EURO pallet - Weight: 252 kg Codedtm Ukepfx Ag Ijrg

Būklė: naudotas, Transport trolley, tubular handle trolley, drum trolley, drum tipper - Drum trolley: drum tipper for 200-liter drum - Drum support: 2 metal rollers Ø60 x 400 mm - Wheel configuration: 2 swivel castors, 2 fixed wheels - Bracket: for drip tray - Dimensions: 990/610/H680 mm - Weight: 20 kg Cjdpfx Agolw Az Uo Ierg

Būklė: naudotas, Drum rack, drum cradle, drum pallet, drum trolley, drum tipper, drum storage rack - Drum rack: Drum pallet for 200-liter drums Crsdpfxolyvc Uo Ag Isg - Handling: Suitable for transport by forklift, see photos - Quantity: 2 racks available - Price: per unit - Dimensions: 1300/800/H275 mm - Weight: 25 kg/unit

Būklė: labai geros būklės (naudotas), Weiss UV200SB Weathering Chamber / UV Ageing Test Device Air-cooled, approx. 200 litres For sale is a Weiss UV200SB weathering chamber, a high-quality test device for simulating sunlight and weather effects. This chamber is used for accelerated ageing tests on plastics, paints, coatings and other materials in accordance with standard norms (e.g. DIN EN ISO 4892-3). Technical Details UV Spectrum: approx. 290–450 nm (UVA/UVB) Lamp Type: Fluorescent UV lamps Temperature Range (UV Phase): approx. +20 to +80 °C Climate Cycling: Alternating UV exposure, condensation and spray phases Humidity Range: approx. 10% – 95% rH (relative humidity) at temperatures above approx. +10 °C Crjdpfx Agsziiz Hs Ieg Temperature Change Rate: approx. 3 K/min Test Chamber Dimensions: Height 750 mm, Width 650 mm, Depth 400 mm External Dimensions: Height 1800 mm, Width 920 mm, Depth 1345 mm Voltage: 3/N/PE AC 400V +10% 50Hz Rated Power: 9.0 kW Rated Current: 15.0 A Refrigerant: R 404A For your security as a buyer, please note the following: The following actions are carried out on our chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: Used Scope of delivery: (see picture) (Specifications and details are subject to change and errors excepted!) For any further questions, please feel free to contact us by phone.

Būklė: labai geros būklės (naudotas), Espec Model: TSA-202E-W Temperature Shock Chamber, Water-Cooled Cold Chamber Range: -55°C to 0°C Hot Chamber Range: +50°C to +200°C System: Two-zone test via flap switching Temperature Fluctuation: ±0.5°C Hot Chamber: Heat-up time: ambient temperature (20°C) to +200°C within 15 min. Cold Chamber: Cool-down time: ambient temperature (20°C) to -55°C within 35 min. Temperature Recovery: within 5 min. Internal Dimensions (W x H x D mm): 650 x 460 x 670 External Dimensions (W x H x D mm): 1550 x 1900 x 1670 Approx. 200 liters Power Supply: 400 V AC 50Hz, 65 A Refrigerant: R404A 5 kg, R23 2.0 kg Weight: approx. 1200 kg Important information for your safety as a buyer: The following points are carried out on our offered chambers in advance: 1. Functional inspection and replacement of necessary components Codpfjzh Htkex Ag Ijrg 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data!) We will gladly answer any further questions by phone.

Būklė: naujas, tuščias svoris: 164 kg, didžiausias leistinas svoris: 586 kg, bendras svoris: 750 kg, ašių konfigūracija: 1 ašis, krovimo vietos ilgis: 2 006 mm, krovinių skyriaus plotis: 1 063 mm, krovos erdvės aukštis: 700 mm, padangos dydis: 155/70 R13, Gamybos metai: 2024, darbinė masė: 750 kg,