Mütek Systemtechnik Vamzdžio Magnetas, Metalo Separatorius, Magnetas pirkti naudotą (35 695)

Būklė: naujas, Gamybos metai: 2026, Skersmuo: 160 mm Gsdpjchuvrofx Afdebn Papildomai, už papildomą mokestį, galima įsigyti šių skersmenų: 180, 200, 250, 300 mm. Dėl kitų skersmenų teiraukitės. Labai tvirta pramoninė konstrukcija. Idealiai tinka vinių/metalo dalių atskyrimui iš medžiagos srautų. Pavyzdžiui, po medžio smulkintuvo. Komplekte 3 itin galingi magnetai. * Pageidaujant, gaminį galima aprūpinti iki 6 magnetų (papildomas mokestis už kiekvieną papildomą magnetą +49 €) - Papildomai galima pasirinkti neodimio magnetus vietoje feritinių. Jūsų privalumai: + Ypač didelės peržiūros durelės su tarpine lengvam vinių pašalinimui + Tvirtas greitojo užrakto mechanizmas + Pagaminta Vokietijoje Peržiūros durelės / anga: 35x18 cm Montavimo ilgis gali skirtis.

Būklė: naudotas, Goudsmit metalų separatorius su besisukančiu magnetu Gsdpfx Asyykdysfdebn Matmenys: 300 mm x 300 mm x 300 mm Su 8 magnetinėmis lazdelėmis Variklio galia: 0,18 kW, 22 aps./min.

Gamybos metai: 2026, būklė: naujas, *The offer is only for the neodymium overband magnet, not the underlying conveyor belt. Gbsdpodubpusfx Afdon *Neodymium magnets are among the strongest magnets in the world. They have extreme holding force and should not be compared with ferrite magnets. Extremely high separation efficiency, depending on material layer height and input material. Probably the most compact overband magnet on the market. Competitors often use less powerful ferrite magnets to save costs. Approximate dimensions: Length: 104 cm Width: 22 cm Height: 28 cm (at the motor) *Control unit not included Surcharge for simple manual start/stop control: + €495 A high-performance industrial neodymium magnet is installed. High-performance neodymium magnet approx. 600x68x36.5 mm *Nails are attracted and discharged to the side along a length of 600 mm, outside the magnetic field. This overband magnet should be installed approx. 7–10 cm above the material flow. *Mounting/suspension to be provided by the customer, depending on the maximum length of metal parts. Ideal for separating nails from wood chips. Optionally usable in a single-shaft shredder with extraction. Requirements: *Your belt width, or effective internal width (of the existing conveyor belt), should ideally be less than 55 cm. *Suitable for separating nails from material streams with a height less than 12 mm, and chip lengths smaller than 25 mm. ----- Optional at extra charge: Cross and incline belt demonstration units from €8,770 net.

Būklė: naujas, Gamybos metai: 2024, Magnetic separator for chip conveyor line Tube magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Gedpfecqvhwsx Afdobn Tube diameter: 180 mm Location: In stock at 54634 Bitburg - immediately available -

Būklė: naujas, Gamybos metai: 2025, Dar viena mašina iš karto prieinama! Briketų presas su PLC valdymu ir automatine briketų ilgio kontrole Našumas: iki 60 kg/h Briketas: 50 mm cilindrinis Variklis: 5,5 kW Matmenys: 1.900 x 1.350 x 1.410 mm Svoris: apie 860 kg Reikalavimai: Išeitinė medžiaga idealiai trumpesnė nei 25 mm drožlių ilgio Gbodpjv Rpxlsfx Afdjn Drėgnumas 6–12% ATRO Mašina tinkama nepertraukiamam darbo režimui. Pvz., briketavimas iki 2,5 val.; 1 val. pertrauka ir pan. Jei mašiną reikia eksploatuoti ilgiau nei 2,5 val. nepertraukiamai, būtina prijungti papildomą aušinimą.

Būklė: naujas, Gamybos metai: 2026, Our best-selling briquetting press – the classic. + Proven and simple technology for extremely high reliability + 25 years of experience, continuous development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Optional extras at additional cost: * Surcharge for level sensor enabling automatic operation + €995 net * Surcharge for large pre-compression chamber + €970 (recommended for very light material such as straw; machine will be 13 cm wider) Briquette diameter: 50 mm Front bush: 50 mm Max. briquette stroke: 40 mm Opt. briquette stroke: 40 mm Throughput (material-dependent): up to 60 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW Gjdpfx Afjgl Nlmodobn 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compressor Press jaws cooling option: no Hydraulic oil cooling option: yes Filling level monitoring option: yes CE compliant Requirements for raw material: - The moisture content (a.d.) must be at least 6% up to a maximum of 18% - Maximum chip length is 15 mm - Installation temperature: heated room with at least +5°C - Customer must ensure hydraulic oil retention - Feedstock must be free from metals and mineral contaminations such as sand, stones, etc. Damage to pressing tools and/or increased wear may result

Būklė: naujas, Gamybos metai: 2026, * Optional features available at extra cost; see below * Approximate production time: +/- 6 months The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by their robust construction, ensuring consistent briquette quality in continuous operation. The compaction process operates without the addition of binding agents—only hydraulic pressing force is applied. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers for installation beneath existing extraction and filtration systems, as part of a complete disposal unit, are also available. Depending on customer requirements, individual MPP NEM machines can be combined into a system. The chip container of the press can be loaded manually, via conveyor belt, by means of an extractor or using a tilting container trolley. For systems requiring fully automatic operation, the use of a lifting and tipping device in combination with a shredder is recommended. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette is, depending on the model, 40 to 80 mm, and the diameter is 50, 65, or 70 mm, depending on the type. For emulsion recovery, the briquetting press can be equipped with a catch pan. In this way, coolants, cutting fluids, and lubricants can be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the storage bin of the briquetting press. An agitator installed at the bottom of the bin prevents bridging and feeds the material into the pre-compaction chamber. In this chamber, a hydraulic slide compresses the material and pushes it into the press block. The main press cylinder compresses the material against a vertical slide until the set pressing pressure is reached. Afterwards, the vertical cylinder moves up and the finished, stable briquette is ejected. The more homogeneous the input material, the more uniform the length of the produced briquettes. Advantages of the briquetting process: • Reduction of volume by up to 90% • Emulsion recovery • Cost savings in storage and transport • Efficient disposal • Profitable resale Briquetting Press NEM 900: For briquetting aluminium chips Throughput: up to 350 kg/h maximum (material-dependent; chip length less than 10 mm) During the last test with aluminium chips less than 18 mm – approx. 260 kg/h *Further details available after a free test with your material . Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm . Technical Data: Total power requirement: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 litres per minute Silo: 1 m³ Silo diameter: 1200 mm Includes agitator Oil tank: 600 litres Dimensions: 2500 x 1700 x 1730 mm (LxWxH) Weight: 2250 kg Gbodpfx Afjgfm Ryjden Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Būklė: geras (naudotas), Clean air extraction Used machine, good condition Pictures to follow Mobile Jet 160, Gsdpjrb D Njfx Afdebn Connection 160, Fan 2.2 kW Airflow 1850 m³/h / 400 V

Būklė: naujas, Gamybos metai: 2026, Machine lead time approx. 3.5 months Very robust machine with high pressing force - Also suitable for producing marketable briquette quality, depending on material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, ongoing development, and expertise + Several thousand machines in use by satisfied customers + Good price-performance ratio Options: Surcharge for cooling unit + €3,995 net (can also be retrofitted later) * Cools the pressing jaws (important from 3.5 hours of operation) and the hydraulic oil * Cooling unit recommended for regular continuous operation of more than 3.5 hours Large pre-compaction chamber + €1,975 net Recommended for light input materials such as planer chips Customs tariff number: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Max. briquette stroke: 50 mm Opt. briquette stroke: 50 mm Performance (material dependent): up to 110 kg/h* During last test approx. 87 kg/h *Dependent on bulk density *Based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compactor Cooling option for pressing jaws: yes, with special accessory coolable pressing jaws Pressing jaw cooling via water tank (to be provided by customer) Godpfxoffh Ate Afdebn Hydraulic oil cooling option: yes Fill level monitoring option: yes String briquette option: yes (material dependent) CE compliant Requirements for raw material: - Moisture content (atro) must be at least 6% and a maximum of 18% - Chip length maximum 15 mm - Installation temperature: heated area at least +5°C - Feed material must be free of metals and mineral impurities such as sand, stones, etc. Damage to pressing tools and/or increased wear may result.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Special price for our demonstration machine One machine remaining, immediately available (ex works Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of residual wood as well as pallet offcuts. Pallets must be prepared using a jigsaw or chainsaw so that they will fit upright into the hopper—see image 2. Ideally, the pieces should be around 40x20x20 cm so that the wood can lie flat on the slider floor. This enables the machine to operate at maximum efficiency. A hydraulically operated pusher moves along the bottom of the shredder and automatically pushes the wood against the rotor depending on load. Material is shredded until it passes through the screen basket. Throughput rate up to 200 kg per hour *depending on screen size and how well the material is prepared. *Discharge conveyor and overband magnet available at additional cost. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent pusher control, Customs tariff number: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 ph. Blades: 15 pieces, reversible multiple times Option: double blade row + €995 net Rotor diameter: 260 mm Control unit: Siemens S7-1200 PLC Cutting unit opening: 630 x 820 mm Fill volume approx. 0.6 cubic meters Hydraulically operated pusher Screen perforation as required (10 - 30 mm) Extraction stub Ø 160 mm Weight approx. 1,300 kg (depending on equipment) Godpfodwktkox Afdjbn Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% absolute dry . Supplied as standard: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta starting - Rapid hydraulic system - Auto stop for rotor idle run - 70–90 rpm for high throughput performance - Timed operation to prevent idle times - Performance-enhancing step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant - MADE IN GERMANY . Shredder options: - Shredder height increased by 30 cm (prepared for conveyor belt) +€2,080 net - Inclined discharge conveyor +€8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Adjustable angle: 0–60 degrees Discharge height: approx. 2000 mm (+/- 100 mm) - Overband magnet +€5,980 net - Control unit for conveyor & overband magnet +€2,750 net (start and stop each synchronized with the shredder) - Hopper extension +€940 net - Eco rings: +€1,980 net (recommended for more than 15% hardwood) - Special scraper +€990 net (recommended for veneer or paper) - Double blade row +€995 net . Raw material requirements: - Moisture content (absolutely dry) must be below 30% - Metals and mineral impurities such as sand, stones, etc. will increase wear.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, The ideal machine for shredding cables, featuring optimized cutting geometry and approximately 9 hours of operation. Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 14 pieces, 40x40mm, multiple cutting edges, rotatable Rotor diameter: 260 mm Control system: Omron PLC Cutting chamber opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation selectable (15 - 40 mm) Suction connection Ø 160 mm Gsdpfxjgmfa Aj Afdebn Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options are available at additional cost: - Double blade row + €1,990 net (28 instead of 14) - Surcharge for four-sided segmented bottom + €2,170 net (Prevents pusher jamming. Recommended when shredding plastics, paper, or veneers less than 3 mm thick.) - Raise shredder height by 30 cm (preparation for conveyor belt) + €1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €6,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Reference: Bea9ia3l27 Raw material requirements: - Mineral contaminants such as sand, stones, etc., cause increased wear. We are happy to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send your material by freight, and we will document the test with pictures and videos.

Gamybos metai: 2007, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, IFE MEL 1400 Electromagnetic Belt Separator Length: 3200 mm Width: 1200 mm Year of manufacture: 2007 Magnet housing protection class: IP65 Magnet power: 7.55 kW Material flow speed: 1.8 m/s Drive power: 4 kW Gbedpfepcf Etsx Afdjn Control voltage: 230 V Operating voltage: 3x400 V Frequency: 50 Hz Cylinder diameter: 500 mm Total weight: 6480 kg Adjustment of the belt and device tension

Būklė: naujas, Gamybos metai: 2025, Universale Faserlaser-Metallrohr-Schneidmaschine – Mehrere Funktionsoptionen ermöglichen den Einsatz der Laserrohr-Schneidmaschine in zahlreichen Rohrbearbeitungsprozessen. Die schlanke Düse ermöglicht es dem Laserschneidkopf, Kollisionen zu vermeiden und verschiedenste Rohrtypen, einschließlich Sonderprofile wie H-Träger, P-Träger, I-Träger usw., präzise zu schneiden. Das Spannen des Werkstücks erfolgt bequem, schnell und einfach – in nur 3 Sekunden ist das Rohr eingespannt, bei gleichzeitig hoher Wiederholgenauigkeit. Leistung und Effizienz der Schneidanlage werden durch einen konstanten Gasstrom mit minimalen Turbulenzen optimiert. Mit BodorGenius in Kombination mit dem ultraschnellen Einstechprozess wird der gesamte Einstechvorgang während der Z-Achsen-Abwärtsbewegung abgeschlossen. Dank dieser Technologie ist bei mittleren und dicken Blechen kein Nachbearbeiten der Einstechlöcher erforderlich. Das Schneiden von Winkelstahl und U-Profilen ist standardmäßig möglich, ohne dass zusätzliche Einrichtungen installiert werden müssen. Gbedehwrhfjpfx Afden Die optimierte Kantenerkennung und fortschrittliche Algorithmen gewährleisten eine höhere Schnittpräzision und eine verbesserte Prozessstabilität des Lasersystems. Zustand: Neu Lasertyp: Faserlaser Laserleistung: 1500W, 2000W, 3000W, 6000W Maximale bearbeitbare Rohrlänge: 6500mm/9200mm Futterantrieb: NC-Elektrofutter Unterstützte Grafikformate: AI, BMP, DST, DWG, DXF, DXP, LAS, PLT CNC: Ja Kühlart: Wasserkühlung

Būklė: naujas, Gamybos metai: 2025, Maschine zum Rundum-Schneiden von Metallrohren mit Faserlaser – Vielfältige Funktionsoptionen ermöglichen den Einsatz der Laserrohrschneidmaschine in zahlreichen Rohrschneideprozessen. Die schlanke Düse ermöglicht es dem Laserschneider, Störungen zu vermeiden und verschiedene Rohrtypen, einschließlich Spezialprofile wie H-Träger, P-Träger, I-Träger usw., präzise zu schneiden. Das Einspannen der Maschine ist komfortabel, einfach und schnell – innerhalb von nur 3 Sekunden fixiert, mit hoher Wiederholgenauigkeit. Die Schneidleistung und Effizienz werden durch einen konstanten Gasfluss mit minimaler Turbulenz deutlich verbessert. Die BodorGenius-Technologie in Kombination mit einem ultraschnellen Einstechvorgang ermöglicht das vollständige Einstechen während der Z-Achsen-Abwärtsbewegung – dank dieser Technik ist bei mittel- und dickwandigen Blechen kein Nacharbeiten mehr nötig. Das Schneiden von Winkelstahl und U-Profilstahl ist standardmäßig möglich, ohne dass zusätzliche Installationen erforderlich sind. Eine optimierte Kantensuchmethode und Algorithmen garantieren höchste Schneidpräzision und erhöhte Stabilität des Laserschneiders. Zustand: Neu Lasertyp: Faserlaser Laserleistung: 1500W, 2000W, 3000W, 6000W Godpfxshwri Se Afdobn Maximal bearbeitbare Rohrlänge: 6500 mm / 9200 mm Spannfutterantrieb: NC-Elektrospannfutter Unterstützte Grafikformate: AI, BMP, DST, DWG, DXF, DXP, LAS, PLT CNC: Ja Kühlungsart: Wasserkühlung

Gamybos metai: 2021, būklė: naujas, Overband Plate Magnet from surplus stock / overproduction Manufactured in VA 1.4301, tightly sealed For sale is a plate magnet with threaded holes on the rear side. The magnet can be installed either as a "police magnet" or for extracting metal contaminants above a conveyor belt. Lifting eyes for suspension are included. Dimensions of the magnet block: 620 x 420 x 250 mm Gjdpfofktk Hsx Afdjbn Only 1 unit available for immediate delivery. Many other dimensions available from stock.

Gamybos metai: 2019, būklė: labai geros būklės (naudotas), Plate Magnet, Lifting Magnet, Overband Magnet, Police Magnet, Magnetic Filter, Magnetic Separator Overband Plate Magnet Design: Fully welded in stainless steel VA 1.4301 NEODYMIUM MAGNET CORE, extremely strong adhesion! Dimensions: 620 x 520 x 200 mm 4 pcs M16 lifting eye bolts on the back This lifting magnet was previously used by one of our customers as a "police magnet" in the meat processing industry. The specified price is per unit. Currently, 1 unit available for immediate delivery from stock! All information provided without guarantee, only available while stocks last! Conveyor belt, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator Our core competence lies in delivering exactly what our customers really need. We work together with our clients to develop customized, individual solutions and supply corresponding systems from our own production. Please feel free to contact us by phone to find the right solution for your application. Overband Plate Magnet Design: Fully welded in stainless steel VA 1.4301 420 x 420 x 200 mm 420 x 420 x 250 mm 620 x 420 x 200 mm 620 x 520 x 200 mm 820 x 520 x 200 mm 820 x 520 x 250 mm Fully welded stainless steel housing to protect the magnet core Lifting rings for suspending Cleaning drawer for easy removal of accumulated contaminants Gbodpfjhuphrox Afdon Can be mounted above any conveyor system...

Gamybos metai: 2021, būklė: naujas, Complete solution for conveying bulk materials and demetallizing magnetic metal contaminants. Aluminium incline conveyor including base frame Incline start section at ground level (adjustable) Discharge height 1,800 mm (adjustable) Design: height adjustable Frame includes suspension for overband magnet separator DMPM1200 Conveyor belt width 500 mm (adjustable) We supply our conveyors with PVC, PU, or rubber belts. PVC conveyor belt with carriers and waved edge Drive: 0.25 kW motor (adjustable), speed 0.3 m/sec Connection: 220/240 V, 50 Hz, IP54 protection rating Drive, etc., pre-wired, motor control optional Gbodpfjhh A Iyox Afden 6x adjustable machine feet for leveling Waved edge: 40 x 35 mm T-20 cleats – 400 mm pitch 2-ply, especially cross-stable Our core competence is delivering exactly what the customer actually needs. We work together with our customers to develop tailored, customer-specific solutions and deliver the corresponding systems from our own production. Please feel free to contact us by phone as well, to find the right solution for your application. Conveyor, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, grate magnets, metal separator, block magnet, filter systems

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Permanent Overband Magnetic Separator TYPE DMPM1200 1,800 x 900 x 220 mm ===== Robust welded steel construction Structure welded & painted RAL 7016 (anthracite grey) Magnet dimensions: 1,200 x 500 x 180 mm Drive roller + return roller made of S235 steel, welded and machined Ø220 x 700 mm crowned, shaft fixed with plummer block bearings Drive: GEMOTEG shaft-mounted geared motor 1.1 kW, speed 0.4–0.6 m/sec Connection: 400V, 50Hz, protection class IP54 Drive pre-wired to motor terminal box (Commissioning must be carried out by qualified electrical personnel) PU conveyor belt DM 20/2 0+010 PU black matte, 5.4 mm thickness Belt width: 650 mm 9 pcs. TG-40 cleats, high-frequency welded Belt material: 3-ply, particularly transversely rigid * Equipped with stainless steel Alligator fasteners RS125 Gsdpfx Afotxn Irsdjbn Magnetic properties: Installed magnet core: Strontium ferrite Y30 Bonded SfRe strontium hard ferrite magnet core encased in soft iron, ensuring very high permeability. Housing tightly sealed with 1.4301 stainless steel plate and pole shoes.

Gamybos metai: 2018, būklė: naujas, Permanent overband magnetic separator Godpfod Dy S Djx Afdjbn TYPE PEM2200 2200 x 1000 x 400 mm ===== 4x lifting eye bolts for suspension Rubber belt GB30 Magnet dimensions: 1200 x 500 mm

Gamybos metai: 2018, būklė: beveik kaip naujas (naudotas), mašinos/transporto priemonės numeris: TMA420x280mm, Drum Magnet - Magnetic Separator in Enclosure incl. Separation Plate, Drive and Gearbox + High-quality stainless steel construction + Separation plate for material division + Shaft support in the form of a bearing unit + Pillow block bearing units Gsdpfx Ajc Tnh Defdjbn Dimensions: L: 420 mm W: 280 mm H: 380 mm Inlet: 365 x 80 mm Drum: Ø 220 x 400 mm

Gamybos metai: 2018, būklė: beveik kaip naujas (parodų įrenginys), mašinos/transporto priemonės numeris: TMA500x600mm, Drum Magnet – Magnetic Separator in Housing incl. Separator Plate, Drive, and Gearbox + High-quality stainless steel construction + Separator plate for material separation + Shaft bracket as a bearing unit + Pillow block bearing units Gsdpfx Aodzqw Asfdobn Dimensions: L: 800 mm W: 800 mm H: 820 mm Inlet: 600 x 250 mm Drum: Ø 500 x 600 mm

Gamybos metai: 2018, būklė: beveik kaip naujas (parodų įrenginys), mašinos/transporto priemonės numeris: TMA420x280mm, Drum Magnet - Magnetic Separator in Enclosure incl. Separation Plate, Drive and Gearbox + High-quality stainless steel construction + Separation plate for material division + Shaft support in the form of a bearing unit + Pillow block bearing units Dimensions: L: 420 mm Gbodpodzqxbofx Afdon W: 280 mm H: 380 mm Inlet: 365 x 80 mm Drum: Ø 220 x 400 mm

Būklė: visiškai atnaujintas (naudotas), „SGM DIS 100“ parduodamas Gamintojas: SGM Magnetics Modelis: DIS 100 Juostos plotis: 1.000 mm (nauja juosta) Gedpfx Asy U N Exefdobn Komplekte: – Nauja valdymo sistema NE-metalo separatorius peržiūrėtas, smėliuotas ir nudažytas.

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Parduodamas „Steinert NES 150 210 E 6119“ Gamintojas: Steinert Tipas: NES 150 210 E 6119 Diržo plotis: 1 500 mm (naujas diržas) Su valdymu. Gjdpfjy S Tv Njx Afdjbn Atnaujinta, subalansuota, smėliuota ir nudažyta.

Būklė: naujas, Gamybos metai: 2025, Allround-Faserlaser-Metallrohrschneidemaschine. Vielfältige Funktionsoptionen ermöglichen es der Laserschneidmaschine für Rohre, in zahlreichen Bearbeitungsprozessen eingesetzt zu werden. Die schlanke Düse erlaubt es dem Laserschneider, Störungen zu vermeiden und verschiedenste Rohrtypen, einschließlich Sonderprofile wie H-Träger, P-Träger, I-Träger usw., präzise zu schneiden. Das Spannen des Werkstücks geschieht komfortabel, einfach und sehr schnell – ein Spannen ist bereits in 3 Sekunden möglich, dabei wird hohe Wiederholgenauigkeit gewährleistet. Die Schneidleistung und Effizienz werden durch die Aufrechterhaltung eines stabilen Gasflusses mit minimaler Turbulenz optimiert. Das BodorGenius-System, kombiniert mit dem äußerst schnellen Einstechverfahren, erledigt das gesamte Einstechen während der Abwärtsbewegung der Z-Achse. Dank dieser Technologie sind Nacharbeiten beim Einstechen von mittel- und dickwandigen Blechen überflüssig. Das Schneiden von Winkelstahl und U-Profilen ist standardmäßig möglich, ohne dass zusätzliche Installationen erforderlich sind. Optimierte Kantenabtastung und Algorithmen gewährleisten eine höhere Schnittpräzision und eine bessere Stabilität des Laserschneiders. Gbjdpfxjhwrk Te Afden Zustand: Neu Lasertyp: Faserlaser Laserleistung: 1500W, 2000W, 3000W, 6000W Maximale bearbeitbare Rohrlänge: 6500mm / 9200mm Futterantriebsarten: NC-Elektrofutter Unterstützte Grafikformate: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC: Ja Kühlungsart: Wasserkühlung