Kraussmaffei Km-650-3500 C-2 pirkti naudotą (104 360)

Būklė: naudotas, Gamybos metai: 2005, Technical details: Screw diameter: 90 mm Shot weight in polystyrene: 1,758 g/PS Clamping force: 6,500 kN Lrjdpfxstuncce Acpek Approx. machine weight: 32 t From serial production

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2004, veikimo valandos: 70 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 6 500 kN, varžto skersmuo: 100 mm, įpurškimo slėgis: 1 742 juosta, formos aukštis (min.): 600 mm, atvērimo eiga: 1 150 mm, plokštės plotis: 1 440 mm, plokštės aukštis: 1 490 mm, Injection moulding machine with Wittmann automation TECHNICAL DETAILS Clamping force: 6,500 kN Mold opening force: 346 kN Sliding platen opening force: 169 kN Sliding platen clamping force: 144 kN Mounting platen dimensions: 1,490 mm x 1,440 mm Clear tie bar spacing: 1,000 mm x 930 mm Mould opening stroke: 1,150 mm Minimum mould height: 600 mm Injection unit Screw diameter: 100 mm Injection pressure: 1,742 bar Injection volume: 2,411 cm³ Shot weight for PS: 2,170 g Injection rate: 649 cm³/s Wittmann W643 Robot X-axis servo: 1,200 mm Y-axis servo: 2,400 mm Z-axis servo: 6,000 mm C-axis servo: +/- 90° A-axis servo: +/- 180° Vacuum: 4 circuits Gripper: 4 circuits Electrical and hydraulic equipment Pump motor rated power: 90 kW Installed heater power: 44 kW Number of barrel heating zones: 7 Oil tank capacity: 1,240 l MACHINE DETAILS Net weight with control cabinet: 39.5 t Operating hours: 70,000 h MAINTENANCE All hydraulic lines replaced 12/24 Last inspection Krauss Maffei 24.03. New (hydraulic) screw drive 25.01. New non-return valve 01/25 FEATURES - Fully hydraulic clamping system Lsdpowp Si Nsfx Acpsrk - MC 4 control system with colour monitor and integrated operator panel - Built-in floppy disk drive - Complete plasticising unit for thermoplastics with 100 mm screw diameter, check valve and open nozzle

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2004, Krauss-Maffei KM 650-3500 C 1 650 ton Krauss-Maffei injection moulding machine, year 2004, with only approx. 45,000 hours in automatic operation. The machine is supplied fully overhauled. OVERHAULED MACHINE Features: 6 pneumatic cascade controls, 24 hot runner zones, 1 core pull on the fixed and 1 core pull on the moving platen. Electric screw drive. Technical Details CLAMPING FORCE: 6,500 kN PLATEN SIZE: 1,540 x 1,440 mm DAYLIGHT BETWEEN PLATENS: 1,110 x 960 mm MOULD OPENING STROKE: 1,150 mm MAX. OPENING DISTANCE: 1,750 mm SCREW DIAMETER: 90 mm MIN. MOULD HEIGHT: 600 mm YEAR OF MANUFACTURE: 2004 INJECTION VOLUME: 1,953 cm³ SHOT WEIGHT: 1,777 g INJECTION PRESSURE: 1,742 bar Lredohy Nnbopfx Acpjk

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, Gamintojas: Krauss Maffei Tipas: KM 650-3500-700 CZ Metai: 2007 Valdymas: MC 4 Lredpfx Ajx Uqa Decpsk Uždarymo blokas: Uždarymo jėga: 650 t Atidarymo eiga: 1150 mm Mažiausias formos aukštis: 600 mm Didžiausias plokščių atstumas: 1750 mm Kolonų tarpai (H x V): 1100 x 900 mm Plokščių matmenys (H x V): 1510 x 1370 mm Centravimas (purkštuko-išstūmimo plokštė): 200/200 mm 1-oji įpurškimo grupė: Sraigto skersmuo: 80 mm Maks. įpurškimo svoris polistirole: 1400 g Smūgio tūris: 1543 ccm Įpurškimo slėgis: 2205 bar 2-oji įpurškimo grupė: Sraigto skersmuo: 45 mm Įpurškimo svoris polistirole: 278 g Smūgio tūris: 305 ccm Įpurškimo slėgis: 2336 bar Priedai: 2 x oro vožtuvas 16 kanalų kaskada 3 x branduolio traukiklis BWAP 3 x branduolio traukiklis FWAP 20 x karšto kanalo valdymo zonų Robotų sąsaja: Euromap 67 Matmenys: Bendras svoris: 34 500 kg Bendras dydis (Ilgis x Plotis x Aukštis): 7,8 x 2,5 x 2,5 m Darbo valandos: 45 400 h Mašina gali būti naudojama ir kaip 1K mašina.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2007, veikimo valandos: 27 000 h, spaudimo jėga: 6 500 kN, Krauss Maffei KM650-3500 C2 injekcinio liejimo mašina parduodama. Mašina yra labai geros būklės, naudota tik vienos pamainos režimu ir tik mažoms serijoms bei pavyzdžiams gaminti. Neseniai sumontuota nauja hidraulinė pompa (apytiksliai 300 darbo valandų). - 27 000 darbo valandų - Gamybos metai: 2007 - MC4 valdymo sistema - Šerdžių ištraukimas iš abiejų pusių Lsdpfx Asyn Sc Eecpsrk - Tempimo strypai ir kreipiančiosios visiškai nepažeistos, kaip naujos - Robotas su išilginio paėmimo įranga (LR300) ir konvejerio juosta - Proporciniai vožtuvai, HPS sraigtas, bimetalinis cilindras - Bendras svoris apie 30 000 kg - Atidarymo eiga: 1 150 mm Adapterinės plokštės taip pat prieinamos pas mus. Galima apžiūrėti prijungus prie elektros. Papildoma įranga, tokia kaip Motan džiovintuvai, šalytuvai ir kt., galima pagal užklausą. Pagal susitarimą, mes galime demontuoti ir pakrauti įrenginį. Laukiame Jūsų užklausos.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 6 500 kN, varžto skersmuo: 70 mm, įpurškimo slėgis: 2 389 juosta, išstūmimo eiga: 135 mm, atvērimo eiga: 1 825 mm, TECHNICAL DETAILS Clamping Unit Clamping force: 6,500 kN Maximum mold opening force: 346 kN Moving platen open force: 169 kN Moving platen close force: 144 kN Mounting platen (H x V): 1,520 x 1,470 mm Clear distance (H x V): 1,000 x 930 mm Mold opening stroke: 1,150 mm Minimum mold installation height: 675 mm Maximum opening distance: 1,825 mm Ejector stroke: 135 mm Ejector force (forward/backward): 226 kN Injection Unit Screw diameter: 70 mm L/D ratio: 23 Injection pressure: 2,389 bar Shot volume: 1,097 cm³ Shot weight (PS): 998 g Injection flow: 393 cm³/s Screw speed: 218 rpm Plasticising rate: 83 g/s Nozzle contact force: 173 kN MACHINE DETAILS Dimensions & Weight Space requirements approx.: 8.70 x 2.90 x 2.80 m Total weight: 44,000 kg Electro-Hydraulic Equipment Rated power of pump motor: 75 kW Installed heating power: 36 kW Lrjdpfx Ajycqc Tecpjk Cylinder heating control zones: 7 EQUIPMENT Swivel elements 1 x air valve 8-way pneumatic cascade control Pressure accumulator 2 x hydraulic core pulls on BWAP 2 x hydraulic core pulls on FWAP Robot interface according to EUROMAP 67

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 6 500 kN, varžto skersmuo: 70 mm, Clamping Unit: Clamping Force: 6,500 kN Max. Mold Opening Force: 346 kN Moving Platen Opening Force: 169 kN Moving Platen Closing Force: 144 kN Mounting Platen (H x V): 1520 x 1470 mm Clearance Between Tie Bars (H x V): 1000 x 930 mm Mold Opening Stroke: 1,150 mm Minimum Mold Installation Height: 675 mm Maximum Daylight Opening: 1,825 mm Ejector Stroke: 135 mm Ejector Force Forward/Return: 226 kN Injection Unit: Screw Diameter: 70 mm L/D Ratio: 23 Injection Pressure: 2,389 bar Shot Volume: 1,097 ccm Shot Weight (PS): 998 g Injection Flow Rate: 393 ccm/s Screw Speed: 218 rpm Plasticizing Rate: 83 g/s Nozzle Contact Force: 173 kN Electrohydraulic Equipment: Rated Pump Motor Power: 75 kW Installed Heating Capacity: 36 kW Cylinder Heating Control Zones: 7 Dimensions and Weight: Space Requirement Approx.: 8.70 x 2.90 x 2.80 m Total Weight: 44,000 kg Accessories: Oscillating Mounts Additional Equipment: - 1 x Air Valve - 8-fold Pneumatic Cascade Control - Accumulator Lodpsv Stbmsfx Acpork - 2 x Hydraulic Core Pulls on Moving Platen - 2 x Hydraulic Core Pulls on Fixed Platen - Robot Interface according to EUROMAP 67

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2006, veikimo valandos: 77 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 5 000 kN, varžto skersmuo: 100 mm, Clamping force: 5000 kN Maximum mold opening force: 280 kN Moving platen drive force (open): 137 kN Moving platen drive force (close): 136 kN Mounting platen (HxV): 1270 x 1200 mm Clear tie bar spacing (HxV): 900 x 800 mm Mold opening stroke: 1170 mm Minimum mold installation height: 480 mm Maximum daylight: 1650 mm Ejector stroke: 250 mm Ejector force (forward/back): 95/48 kN Lrodpfx Acewgni Hopsk Injection unit: Screw diameter: 100 mm L/D ratio: 18 Injection pressure: 1411 bar Shot volume: 2411 cc Shot weight (PS): 2194 g Injection rate: 801 cc/s Screw speed: 189 rpm Plasticizing rate: 161 g/s Nozzle contact force: 173 kN Electrohydraulic equipment: Rated pump motor power: 90 kW Installed heating power: 44 kW Cylinder heating control zones: 7 Oil capacity: 1075 liters Dimensions and weights: Space requirements (approx.): 7.50 x 2.50 x 2.50 m Total weight: 27,090 kg Maximum mold weight: 7,900 kg Accessories: - Oscillation elements - 2 x 8-circuit water manifold Additional equipment: - 2 x hydraulic core pulls on the moving platen - 2 x hydraulic core pulls on the fixed platen - Robot interface according to Euromap 12 - 16 x hot runner control zones - 1 x air valve on the moving platen

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, veikimo valandos: 47 137 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61020607, spaudimo jėga: 1 300 kN, tarpas tarp stulpų: 470 mm, Here, as a specialist dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Important Update – Tax-Related Notice and Advantage for Used Machines: As of 01.07.2025, used machines in Germany will also be eligible for a special tax depreciation of 30% per annum. In addition to the more attractive price compared to new machines, you will be able to claim the same depreciation amounts as for new equipment. Keyword: Growth Booster (Section 7 (2) EStG-E) Manufacturer: Krauss Maffei Model: KM 130 750-130 CXV BluePower, 2-Colour 2-Component Machine Control System: MC6 Year of manufacture: 2014 Machine no.: 61020507 Operating hours: 47,137 h Comprehensive maintenance documentation available for the last 7 years / 25,000 operating hours 1st Injection Unit: 750 horizontal Screw diameter: 50 mm Injection volume: 393 cm³ Shot weight: 357 g Installed heat output: kW Number of heating zones: 5 Nozzle stroke: mm Injection pressure: 1,892 bar 2nd Injection Unit: 180 vertical Screw diameter: 30 mm Injection volume: 85 cm³ Shot weight: 77 g Injection pressure: 2,500 bar Clamping Unit Clamping force: 130 t / 1,300 kN Opening stroke: 600 mm Tie bar distance: 470 x 470 mm Platen size: 745 x 770 mm Max. platen spacing: 900 mm Min. mould height: 300 mm Ejector stroke: 150 mm / Ejector force: 23 kN Dimensions: 4.39 x 1.61 x 4.01 m Weight: 9,000 kg Extras – Complete machine specifications available as PDF document Nozzle side: Needle shut-off A+C 1 x hydraulic core pull Lrjdpfx Aceyf Uy Uspsk 1 x pneumatic core pull 1 x blow-off device Ejector side: 1 x hydraulic core pull 3 x pneumatic core pulls 1 x blow-off device Cooling circuits: 6 each on nozzle and ejector side BluePower Technology: up to 40% energy savings The machine is very well maintained and can be inspected under power. Any peripheral equipment shown in photos is NOT included in this offer! The machine is available immediately. Delivery options: Free loaded onto purchaser’s truck, or delivered free to location (with reimbursement of freight costs) Information about our machines and company: - We only sell machines that we own, purchased directly from running production; - All machines offered are inspected and tested prior to removal; - We DO NOT sell insolvency stock – we are NOT brokers trading third-party equipment; - All machines come from successful companies where maintenance and care are a given; - All offered machines are available for inspection at our warehouse in Hanover.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1997, Stock No. 13602 Manufacturer: Krauss Maffei Machine Type: KM 650 – 8000 CM Year of Manufacture: 1997 Operating Hours: 80,000 h Control System: MC 3-F Screen Language: German Location: D-52249 Eschweiler Clamping Unit: Clamping Force: 6,500 kN Max. Mold Opening Force: 346 kN Moving Platen Opening Force: 169 kN Moving Platen Closing Force: 144 kN Mounting Plate (H x V): 1704 x 1700 mm Clearance Between Tie Bars (H x V): 930 x 930 mm Mold Opening Stroke: 1,150 mm Min. Mold Installation Height: 600 mm Daylight: 1,750 mm Ejector Stroke: 250 mm Ejector Force fwd/back: 226 kN Injection Unit: Screw Diameter: 130 mm L/D Ratio: 20 Injection Pressure: 1,296 bar Shot Volume: 6,172 cc Shot Weight (PS): 5,617 g Injection Flow Rate: 1,540 cc/s Screw Speed: 138 rpm Plasticizing Rate: 238 g/s Nozzle Contact Force: 246 kN Electrohydraulic Equipment: Rated Pump Motor Power: 132 kW Installed Heating Capacity: 70 kW Cylinder Heating Zones: 7 Dimensions and Weight: Space Requirement approx.: 12.00 x 2.80 x 2.70 m Total Weight: 43,000 kg Lrjdpeub S R Hofx Acpek Accessories: - Vibration dampers Additional Equipment: - 1 x air valve - 2 x hydraulic core pulls on moving platen (BFAP) - 2 x hydraulic core pulls on fixed platen (FFAP) - 8 x hot runner control zones - Robot interface as per Euromap 67

Būklė: naudotas, Gamybos metai: 2010, Injection moulding machine Krauss Maffei KM 650-4300, year 2010 Lredsw Hwthjpfx Acpek

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61036721, spaudimo jėga: 6 500 kN, varžto skersmuo: 70 mm, tarpas tarp stulpų: 1 110 mm, darbinio tūrio: 1 078 cm³, įpurškimo slėgis: 1 877 juosta, injekcijos svoris: 981 g, atvērimo eiga: 3 200 mm, plokštės aukštis: 1 540 mm, pavaros tipas: Hydraulisch, laisvas tarpatramis: 3 200 mm, įrankio svoris: 2 200 000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you here our inspected and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. The sophisticated GuideX sliding shoe perfectly absorbs forces and extends the lifetime of the moulds. The innovative GearX locking system engages immediately and reliably. Powerful, user-friendly and highly stable in value. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24” TFT colour display with multitouch functionality CLAMPING UNIT - Clamping force kN 6500 - Max. mould open force kN 455 - Tie bar spacing (h x v) mm 1110 x 960 - Platen size (h x v) mm 1540 x 1440 - Mould installation height min.-max. mm 1550 (without center platen) - Daylight mm 3200 - Max. opening stroke mm 1650 - Max. mould weight kg 22000 INJECTION UNIT 1 SP2000 - Screw diameter/type mm 60 / Thermoplastic - Effective L/D ratio 23.3 - Injection pressure bar 2420 - Shot volume cm³ 792 - Shot weight max. stroke PS g 720 - Injection speed mm/s 140 - Injection flow rate cm³/s 396 - Screw drive speed 1/min 285 - Plasticising rate g/s 72.2 - Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 - Screw diameter/type mm 70 / Thermoplastic - Effective L/D ratio 20 - Injection pressure bar 1877 - Shot volume cm³ 1078 - Shot weight max. stroke PS g 981 - Injection speed mm/s 140 - Injection flow rate cm³/s 539 - Screw drive speed 1/min 285 - Plasticising rate g/s 98.3 - Nozzle contact force kN 82 ELECTRICAL SPECIFICATIONS - Connected load kW 341 - Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS - Net weight t 43.5 - Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT - Wear-resistant plasticising unit - BluePower full insulation for plasticising cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves 6-fold (BWAP), 6-fold (FWAP) Lsdpjw U N Ixofx Acpjrk - Hydraulic core pull 2-fold (BWAP), 2-fold (FWAP) - Mould heating 96-fold (3.5 kW) - Euromap interface for handling E18 - Euromap interface (central computer) E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven - Vertical center platen - Parallel clamping and opening movement during injection process with platen parallelism control between FWAP and center platen or BWAP and center platen - ColorForm interface—signal interface for connecting an RPM system - Electrical interface for HRS Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/reject part separation The machine is located at our factory in Parsdorf and is available at short notice. Additional options available upon request. We look forward to your enquiry.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 504212, spaudimo jėga: 5 000 kN, varžto skersmuo: 90 mm, tarpas tarp stulpų: 900 mm, įpurškimo slėgis: 1 742 juosta, įrengimo aukštis: 480 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping Unit Clamping force: 5,000 kN Ledpfew Dy Rwox Acpork Distance between tie bars (h x v): 900 x 800 mm Max. mold opening distance: 1,170 mm Min. mold installation height: 480 mm Platen opening stroke: 1,650 mm Ejector stroke: 250 mm Ejector force: 95 kN Ejector force (reverse): 48 kN Injection Unit Screw diameter: 90 mm L/D ratio: 20 Injection pressure: 1,742 bar Injection volume: 1,953 cm³ Shot weight for PS: 1,777 g Injection rate: 649 cm³/s Nozzle contact force: 115 kN MACHINE DETAILS Electrical Data Pump connected load: 90 kW Heating capacity: 44 kW Operating voltage: 400 V Frequency: 50 Hz Total rated current (Iₙ): 306 A Motor rated current (Iₙ): 170 A Operating voltage: 3-phase Dimensions & Weight Net weight: 25.8 t Machine dimensions (L x W x H): 7.65 x 2.33 x 2.55 m Note: Delivery, installation, and commissioning can be arranged upon request for an additional fee.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2007, veikimo valandos: 70 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 6 500 kN, varžto skersmuo: 95 mm, darbinio tūrio: 3 367 cm³, Clamping force: 6500 kN Maximum tool opening force: 346 kN Moving platen travel force opening: 169 kN Moving platen travel force closing: 144 kN Clamping platen (H x V): 1520 x 1470 mm Clearance between tie bars (H x V): 1000 x 930 mm Mould opening stroke: 1150 mm Minimum mould installation height: 600 mm Maximum opening width: 1750 mm Ejector stroke: 250 mm Ejector force fwd/rev: 95 kN Injection unit: Screw diameter: 95 mm Ls/D ratio: 23 Injection pressure: 1795 bar Shot volume: 3367 ccm Shot weight (PS): 3064 g Injection flow: 690 ccm/s Screw speed: 153 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN Electro-hydraulic equipment: Pump motor rated power: 90 kW Installed heating capacity: 50 kW Number of cylinder heating control zones: 7 Dimensions and weights: Space requirement approx.: 9.83 x 2.90 x 2.80 m Total weight: 43,170 kg Accessories: - Anti-vibration mounting elements - Krauss Maffei Robot LR300 X-axis: 1200 mm, servo-driven Y-axis: 1000/1000 mm, telescopic, servo-driven Z-axis: 3500 mm, servo-driven C-axis: 0–90° pneumatic - Conveyor belt - Safety guarding Additional equipment: - 1 x air valve - 6-fold pneumatic cascade control - 12 x hot runner controllers - 2 x hydraulic core pulls on moving platen Lodjx Hzzcspfx Acpsrk - 2 x hydraulic core pulls on fixed platen

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 6 500 kN, varžto skersmuo: 130 mm, darbinio tūrio: 6 172 cm³, įpurškimo slėgis: 1,296 juosta, plokštės plotis: 1 700 mm, plokštės aukštis: 1 704 mm, TECHNICAL DETAILS Clamping force: 6,500 kN Maximum tool opening force: 346 kN Moving platen opening force: 169 kN Moving platen closing force: 144 kN Clamping plate (width x height): 1,704 x 1,700 mm Clear space (width x height): 930 x 930 mm Mold opening stroke: 1,150 mm Minimum mold installation height: 600 mm Opening width: 1,750 mm Ejector stroke: 250 mm Ejector force forward/backward: 226 kN Injection Unit Screw diameter: 130 mm L/D ratio: 20 Injection pressure: 1,296 bar Stroke volume: 6,172 cc Shot weight (PS): 5,617 g Injection flow rate: 1,540 cc/s Screw rotation speed: 138 rpm Plasticizing rate: 238 g/s Nozzle contact force: 246 kN Electrohydraulic Equipment Pump motor rated power: 132 kW Installed heating power: 70 kW Number of heating zones (cylinder): 7 MACHINE DETAILS Space requirement approx.: 12.00 x 2.80 x 2.70 m Total weight: 43,000 kg EQUIPMENT - Oscillation elements - 1 x air valve Ljdpfxox Dbtwo Acpjrk - 2 x hydraulic core pullers at BFAP - 2 x hydraulic core pullers at FFAP - 8 x hot runner control zones - Robot interface according to Euromap 67

Būklė: labai geros būklės (naudotas), Gamybos metai: 2019, Krauss Maffei KM 250-2000 CX Blue Power with Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2019 Injection Unit: Screw diameter: 70 mm Shot weight: 980 g Injection pressure: 1,877 bar Dosage volume: 1,077 cm³ Clamping Unit: Clamping force: 250 t Tie bar spacing: 630 x 630 mm Platen size: 995 x 1,050 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 - touchscreen Additional equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Air valve x 1 Hydraulic core pull x 3 Pneumatic core pull x 1 Hot runner control x 16 Injection unit hardened - bimetallic Energy-efficient machine – equipped with a system of 3 hydraulic pumps with variable output Parallel movements Proportional valve on injection unit – precise injection Additional oil filtration pump Robot: Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2015 5-axis robot: 4 axes powered by electric servomotors (X, Y, Z, B); C-axis Touch control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Ljdjy Dqiwopfx Acpjrk Purchase of the robot and conveyor belt at an extra charge Dimensions: Weight: 20,100 kg Length/Width/Height: 6.50 x 2.20 x 2.30 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, Krauss Maffei KM 200-1400 CX with Krauss Maffei LRX Easy Control 100 robot / Operating hours: 12,000 h in automatic mode Year of manufacture: 2018 Injection unit: Screw diameter: 60 mm Shot weight: 617 g Injection pressure: 2007 bar Dose volume: 679 ccm Clamping unit: Clamping force: 200 t Tie-bar distance: 560x560 mm Platen size: 915x915 mm Ejector: hydraulic Clamping unit: hydraulic Ljdpfxoy Dqiqo Acperk Control system: MC6 – touchscreen Additional equipment: Very good technical condition Operating hours: 12,000 h in automatic mode Euromap 67 Robot interface Air valve with vacuum monitoring x 1 Hydraulic core pull x 3 Air core pull x 3 Hot runner control with 10 zones Injection unit hardened – bimetallic Energy-efficient machine – equipped with a system of 3 variable-displacement hydraulic pumps Parallel movements Proportional valve on the injection unit – precise injection Machine manufactured in December 2018, delivered to customer in 2019 Robot Krauss Maffei LRX Easy Control 100 Year of manufacture: 2019 4-axis robot: 3 axes driven by servomotors (electric); C axis – pneumatic Touch control panel Safety package for robot Robot complete with adapter, conveyor belt, and safety enclosure Purchase of the robot and conveyor belt for an additional charge Dimensions: Weight: 11,500 kg Length/Width/Height: 6.10x2.20x2.30 m All offered machines are started up by our service technicians before sale. It is possible to obtain a video of the technical inspection of the selected machine or to participate in a live technical demonstration at our facility in Łódź. Price: On request

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2010, veikimo valandos: 65 850 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61013689, spaudimo jėga: 2 500 kN, varžto skersmuo: 50 mm, tarpas tarp stulpų: 630 mm, darbinio tūrio: 432 cm³, įpurškimo slėgis: 2 304 juosta, injekcijos svoris: 393 g, Įranga: dokumentacija / vadovas, Here we, as a dealer in injection moulding machines, offer the following well-maintained pre-owned injection moulding machine. Naturally, we also purchase well-maintained injection moulding machines, subject to models from 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Current Tax Savings and Advantages for Used Machines: From 01.07.2025, used machines are also eligible for a 30% annual special depreciation allowance. In addition to the lower purchase price compared to new equipment, you can claim the same depreciation amounts as with new machinery. Keyword: Growth Booster (§ 7 Section 2 EStG-E) Currently in stock, tested at our warehouse in Hanover: Manufacturer: Krauss Maffei Model: KM 250 1000 CX Control Unit: MC5 Year of manufacture: 2010 Operating hours: 65,850 h Machine No.: 61013689 Processed materials: PE and PP – Thermoplastics Features: - 2 x core pull (moving WAP, fixed WAP) - Pneumatic valve 1 on FWAP - Accumulator for increased injection capacity - Fast SK removal CX Midrange - Ejecting cooled nozzle tip - Start handling during mould movement - Start-up circuit - Cycle time analysis - External USB keyboard - Graphic analysis – maintenance alerts - Electronic coding of injection unit - Pneumatic valve on BWAP for air blast - 12 temperature control zones - Volt-free contact BDE - Process monitoring - Cycle data storage - Trend graphics – target/actual graph - PV control - Active back pressure control - From first ownership – origin Germany Regular maintenance by manufacturer and previous owner Clamping Unit Clamping force: 2500 kN / 250 t Tie bar distance: 630 x 630 mm Platen size: 995 x 1050 mm Opening width: 820 mm Min. mould height: 330 mm Max. opening stroke: 1,150 mm Ejector stroke: 200 mm Ejector force: 57 kN max / 26.3 kN return Injection Unit Screw diameter: 50 mm Injection volume: 432 cm³ Shot weight: 393 g/PS Injection pressure: 2,304 bar Electrics Pump: 45 kW Heating: 5 zones, 18.7 kW Weight: 13,900 kg Dimensions: 5.7 x 2.3 x 2.3 m Complete documentation, manual, and software Available immediately from our warehouse in Hanover, Germany, ex stock or delivered (shipping costs apply). The machine is offered fully tested and functional. The machine is our sole property. Lredpfxexqhuus Acpok The requested machine is available immediately in Hanover, fully tested for functionality, and can be inspected under power. Information about our company and machines: - We only sell machines acquired from active production, from our own stock in Hanover. - All machines are checked and tested before removal. - We do NOT sell insolvency assets – we are NOT brokers dealing in third-party property. - Every machine offered comes from successful companies with a proven record of regular service and maintenance. - All offered machines can be inspected in our warehouse.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, Here we offer a very well-maintained, continuously serviced injection moulding machine. We are also happy to take well-kept machines from year of manufacture 2010 onwards in part exchange. Please offer us your available machines. Complete servicing by manufacturer ongoing. Injection Moulding Machine Krauss Maffei KM65-160 C2 Injection Moulding Machine: Manufacturer / Model: Krauss Maffei KM65-160 C2 Serial No.: 61007063 Year of manufacture: 2005 Control unit: MC4 Fully serviced annually by the manufacturer Clamping Unit: Clamping force: 650 kN / 65 tons Tie bar spacing: 405 x 405 mm Min. mould installation height: 250 mm Max. platen open daylight: 750 mm Mounting platen (standard): 610 x 610 mm Ejector stroke: 150 mm Core pull: 1x unit Injection Unit: Injection unit size / Cylinder Ø: 160 / Cylinder diameters: Ø25mm and Ø18mm Max. shot weight (Ø25): 47g/PS Injection rate: 63 cm³/sec Max. specific injection pressure: 2500 bar Handling interface: Euromap 12 Dosing unit interface: Yes Dimensions & Weights: Weight with control cabinet: 3.8 t Length: 3800 mm Width (machine only): 1050 mm Height: 1890 mm Oil volume: 270 L Location: Hannover / Lower Saxony Ljdpfx Acsh Dp R Ejpork The machine is in excellent condition and can be inspected under power. Any illustrated peripheral devices are NOT included in the offer! The machine is immediately available from our warehouse Free loading onto buyer’s truck, or free delivery within Germany against reimbursement of freight costs. About the machines and our company: - We exclusively sell machines acquired from our own running production, directly from our warehouse in Hannover. - All offered machines are inspected and tested before removal. - We do NOT sell insolvency assets – we are NOT brokers dealing in third-party property. - All offered machines are sourced from successful companies for whom regular maintenance and servicing are standard. - All offered machines can be inspected at our warehouse.

Būklė: geras (naudotas), Gamybos metai: 2004, spaudimo jėga: 1 250 kN, varžto skersmuo: 45 mm, tarpas tarp stulpų: 470 mm, darbinio tūrio: 275 cm³, įpurškimo slėgis: 1 878 juosta, injekcijos svoris: 250 g, formos aukštis (min.): 300 mm, Krauss Maffei 125-520 C2 Bendroji informacija Modelis: 125-520 C2 Pagaminimo metai: 2004 Valdymas: MC4 Mašinos svoris: 6000 kg Matmenys (ilgis × plotis × aukštis): 4,5 × 1,5 × 2,2 m Uždarymo blokas Lsdpfxeyxl Dle Acpjrk Užspaudimo jėga: 125 t Formos uždarymo sistema: 125 / … Formos plokščių matmenys: 745 × 770 mm Atstumas tarp kolonų: 470 × 470 mm Atidarymo eiga: 600 mm Maksimalus atstumas tarp plokščių: 900 mm Formos aukštis: 300 mm Išstūmėjo jėga: 22 kN Išstūmėjo eiga: 150 mm Įpurškimo blokas Įpurškimo vienetas: … / 520 Sraigto skersmuo: 45 mm Sraigto L/D santykis: 20 Įpurškimo tūris: 275 ccm Įpurškimo masė: 250 g Specifinis įpurškimo slėgis: 1878 barai

Būklė: naudotas, Gamybos metai: 2004, veikimo valandos: 76 000 h, bendras aukštis: 2 480 mm, bendras plotis: 2 330 mm, bendras ilgis: 9 830 mm, varžto skersmuo: 70 mm, spaudimo jėga: 4 200 kN, darbinio tūrio: 1 047 cm³, Uždarymo jėga: 4200 kN Stulpelių atstumas a x p: 800 x 800 mm Plokščių dydis a x p: 1270 x 1200 mm Minimalus montavimo aukštis: 380 mm Didžiausias plokščių atstumas: 1400 mm Atidarymo eiga: 1020 mm Sraigto skersmuo: 70 mm Įpurškimo tūris: 1047 ccm Įpurškimo slėgis: 1778 bar Lodpfxjyv E Ews Acpsrk 2-asis agregatas 55 su ø 22 Įpurškimo slėgis: 1674 bar Tūris: 30 cm³ Atstumas tarp plastifikavimo agregatų 1 ir 2: 300 mm (perdengtas montavimas / Z padėtis) Įranga: Ekrano tekstas vokiečių Hidraulinis šerdies ištraukimas 6x Mašina be apdorojimo roboto Mašina be medžiagų bunkerio Išlyginimo elementai Formų šildytuvai 16x Dvikomponentė liejimo mašina Staklių matmenys I x P x A: 9,83 m x 2,33 m x 2,48 m Bendras svoris: 23090 kg

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2005, veikimo valandos: 59 000 h, spaudimo jėga: 4 200 kN, varžto skersmuo: 60 mm, darbinio tūrio: 769 cm³, įpurškimo slėgis: 2 200 juosta, bendras ilgis: 6 830 mm, bendras plotis: 2 330 mm, bendras aukštis: 2 480 mm, bendras svoris: 23 090 kg, Uždarymo jėga: 4200 kN Kolonų matmenys (plotis x aukštis): 800 x 800 mm Plokštės matmenys (plotis x aukštis): 1270 x 1200 mm Minimalus įrengimo aukštis: 580 mm Maksimalus plokščių atstumas: 1300 mm Atidarymo eiga: 720 mm Sraigto diametras: 60 mm Darbinis tūris: 769 ccm Įpurškimo slėgis: 2200 bar Įranga Ekrano tekstas vokiečių kalba Hidraulinis šerdies ištrauktuvas 4x Mašina be valdymo Mašina be medžiagos bunkerio Niveliavimo elementai Įrankio šildymas 12x Lodpoyv E Dajfx Acperk Mašinos matmenys Ilgis x Plotis x Aukštis: 6.83 m x 2.33 m x 2.48 m Bendras svoris: 23090 kg

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2010, veikimo valandos: 54 872 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 2 500 kN, varžto skersmuo: 55 mm, darbinio tūrio: 570 cm³, įpurškimo slėgis: 2 387 juosta, bendras ilgis: 6 500 mm, bendras plotis: 2 200 mm, bendras aukštis: 2 300 mm, bendras svoris: 15 000 kg, Uždarymo jėga: 2500 kN Kolonų atstumas h x v: 630 x 630 mm Plokščių dydis h x v: 995 x 1050 mm Minimalus įrengimo aukštis: 330 mm Maksimalus plokščių atstumas: 1150 mm Atidarymo eiga: 820 mm Sraigto skersmuo: 55 mm Stūmos tūris: 570 ccm Liejimo slėgis: 2387 bar Įranga: 2x karšto kanalo temperatūros valdymo taškai Ekrano kalba vokiečių CEE lizdas 16A Slėgio kaupiklis padidintam įpurškimo našumui + išstūmiklis arba šerdies traukiklis paraleliai 1x hidraulinis šerdies traukiklis 4x oro vožtuvai Mašina su medžiagų piltuvu Mašina su vandens akumuliatoriumi Mašina be valdymo įrangos Lyginimo elementai EUROMAP 12 sąsaja EUROMAP 67 valdymo sąsaja Lodpfeyv Elwsx Acperk USB sąsaja Schuko lizdas 10A Dėvėjimuisi atspari plastifikavimo sistema Mašinos matmenys I x P x A: 6,5 m x 2,2 m x 2,3 m Bendras svoris: 15 000 kg

Gamybos metai: 2008, veikimo valandos: 3 200 h, būklė: paruoštas naudoti (naudotas), varžto skersmuo: 60 mm, Šis 5 ašių "Krauss Maffei KM 200 CX 1400 MC5" buvo pagamintas 2008 m. Jo prispaudimo jėga 200 tonų, kurią galima išplėsti iki 300 tonų, o sraigto skersmuo - 60 mm. Mašinoje yra hidraulinis ežektorius, šoninis oro vožtuvas, roboto sąsaja ir 4 zonų formos temperatūros kontrolės sistema. Jei ieškote aukštos kokybės liejimo liejimo galimybių, apsvarstykite mūsų parduodamą "Krauss Maffei KM 200 CX 1400 MC5" mašiną. Susisiekite su mumis ir gaukite daugiau informacijos. Papildoma įranga Lrsdpfoyaizvjx Acpok • Hidraulinis išmetiklis • Šoninis oro vožtuvas • Roboto sąsaja • 4 zonų pelėsių temperatūros kontrolės sistema Mašinos privalumai Techninės mašinos privalumai • Tarpas tarp jungiamųjų strypų: 560 x 560 mm Papildoma informacija Mašina vis dar įjungta

Būklė: geras (naudotas), Gamybos metai: 1999, spaudimo jėga: 2 000 kN, Gamintojas: KraussMaffei Kunststofftechnik München Modelis: KM 200-700 C2 Mašinos Nr.: 174406 Tarptautinis dydžio žymėjimas: 700 C2 / 200 Metai: 1999 Uždarymo jėga: 2000 kN Uždarymo jėga: 200 t Lodpfx Ajytiqwocpjrk Įpurškimo agregato dydis: 700 Mašinos svoris: 8800 kg Vieta: Freiburgas