Klimatinė Kamera Memmert Ich 260 pirkti naudotą (7 449)

Gamybos metai: 2021, būklė: beveik kaip naujas (naudotas), Memmert ICH 260 kamera iš 2021 metų, kaip nauja. Įrenginys po parodų ekspozicijos. Vienerių metų garantija atsarginėms dalims. Gamintojo aprašymas: Darbinės temperatūros diapazonas be drėgmės: 0 iki +60 °C Temperatūros nustatymo diapazonas 0 iki +60 °C Darbinės temperatūros diapazonas nuo +10°C iki +60°C esant drėgmei ir/ar šviesai Temperatūros nustatymo tikslumas 0,1 °C Temperatūros jutiklis 2 Pt100 jutikliai pagal DIN A klasę, keturių laidų grandinėje, tarpusavio stebėsenai, perima funkcijas gedimo atveju Dedpfx Anszam Hvs Hokn Drėgmė Drėkinimas atliekamas panaudojant distiliuotą vandenį iš išorinio rezervuaro savaime įsiurbiančios siurblio pagalba Drėkinimas garų generatoriumi Drėgmė aktyvus oro drėkinimas ir džiovinimas reguliuojamas 10–80 % santykinės drėgmės ribose, su skaitmeniniu drėgmės indikatoriumi – indikatoriaus skiriamoji geba 0,1 %, nustatymo tikslumas 0,5 %

Gamybos metai: 2021, būklė: labai geros būklės (naudotas), Memmert ICH 260L Chamber from 2021. The device is offered with a one-year spare parts warranty. Dkodpfxjzam Hij An Hen Manufacturer’s description Temperature Operating temperature range without humidity: 0 to +60 °C Temperature setting range 0 to +60 °C Operating temperature range from +10°C to +60°C with humidity and/or light Temperature setting accuracy 0.1 °C Temperature sensor 2 x Pt100 sensors, DIN Class A, 4-wire circuit, mutually monitoring and takeover functionality in case of fault Humidity Humidity humidification using distilled water from an external reservoir, fed by a self-priming pump Humidification generated by a steam generator Humidity active humidification and dehumidification, adjustable within a 10–80% relative humidity range with digital RH display – display resolution 0.1%, setting accuracy 0.5% Light Light Daylight and ultraviolet light can be programmed individually via the controller Light cold white light +/- 6%, for UV light +/- 10% Light Lighting unit consisting of 4 cold white fluorescent tubes (standard D65 illumination, 6500 K) and 2 UV lamps in the spectral range of 320–400 nm

Gamybos metai: 2019, būklė: labai geros būklės (naudotas), Memmert ICH 750 L eco – ex demo (2019) – L version with lighting We are offering a Memmert ICH 750 L eco climate chamber, L version (with lighting), year 2019. The unit comes directly from the manufacturer’s display, was used only minimally, and is in very good technical and visual condition. Key information: * Model: ICH 750 L eco (L version – with lighting) * Year: 2019 (ex demo) * Capacity: approx. 750 liters * Temperature range: * Without humidity: from 0°C to +60°C * With humidity: from 0°C to +60°C * Humidity range: 10–80% RH * Energy-saving ECO cooling system * Digital, user-friendly controller * Stainless steel chamber L version – lighting: * Integrated lighting system (white light + UV) * Ideal for photostability testing (e.g., according to ICH Q1B) * Uniform sample illumination * Capability to run day/night cycles Features and benefits: * Precise temperature and humidity control * Excellent uniformity of chamber conditions * Quiet and stable operation * Reliability and high build quality by Memmert Condition: Ex demo unit – minimal signs of use, fully functional, tested before sale. Additional information: On request, we can provide photos, a video of the unit in operation, or arrange an online demonstration. 9 months parts warranty included with the unit. Dodpfsymy Utsx An Hokn

Gamybos metai: 2022, būklė: beveik kaip naujas (naudotas), Memmert ICH 750 chamber from 2022, like new. Ex-demo unit with one-year warranty on spare parts. Description: Temperature setting range -10 to +60 °C Operating temperature range from -10°C to +60°C without humidity (not suitable for long-term storage at subzero temperatures; continuous operation may cause ice formation on the glass door) Operating temperature range from +10°C to +60°C with humidity and/or lighting Temperature control accuracy 0.1 °C Temperature sensor Dedpfszam H Asx An Hskn 2 x Pt100 DIN Class A sensors, 4-wire circuit for mutual monitoring; function transfer in case of fault Humidity Humidity Humidity supplied via distilled water from an external tank using a self-priming pump Humidification Humidification by hot steam generator Humidity Active humidification and dehumidification, adjustable in the range of 10-80% RH with digital humidity display – display resolution 0.1%, setting accuracy 0.5%.

Gamybos metai: 2024, būklė: beveik kaip naujas (naudotas), Memmert HPP 1060 eco Chamber, year 2024. Ex-demo unit with a one-year warranty on spare parts. Manufacturer’s description: Temperature setting range without light, with humidity: +5 to +70 °C Temperature setting range without light, without humidity: 0 to +70 °C Operating temperature range without light, with humidity: +5 (at least 20 below ambient temperature) to +70 °C Operating temperature range without light, without humidity: 0 (at least 20 below ambient temperature) to +70 °C Temperature setting accuracy 0.1 °C Temperature sensor 2 x Pt100 sensors DIN Class A in four-wire circuit for mutual monitoring, with error fallback capability Humidity Humidity setting range Dksdpfx Anezam E Ss Hsn 10 – 90% relative humidity Humidity humidification provided by distilled water from an external tank via a self-priming pump Humidification humidification using a steam generator Dehumidification dehumidification via Peltier technology refrigeration dryer Humidity setting accuracy 0.5% relative humidity

Gamybos metai: 2025, būklė: beveik kaip naujas (naudotas), Binder MKF 720 E5 climate chamber from 2025. Chamber unused, brand new, 3-year warranty on spare parts. The Binder MKF 720 E5 is a professional climate/environmental chamber designed for stability studies, as well as temperature and climate testing in accordance with DIN and IEC standards. The E5 series represents the latest generation of Binder units, featuring a touchscreen display and advanced programmable control. Key features: * Temperature range: -40°C to +180°C * Humidity range: 10–98% RH * Chamber capacity: approx. 734 liters * APT.line™ preheating chamber technology * Very rapid temperature change capabilities * Humidity control via capacitive sensor + steam humidification * Binder E5 touchscreen controller with segment and time programming * Built-in data logger + data export via USB * Ethernet interface * Heated inspection window with LED lighting * Automatic water supply and drainage management * Inner chamber made of stainless steel * Compressor cooling * Refrigerant: R-452A Dkedoy Sg Nvopfx An Hon

Gamybos metai: 2026, būklė: beveik kaip naujas (naudotas), Binder KBF 720 E7 from 2026. Device like new, 2-year warranty on spare parts. PRODUCT DESCRIPTION A proven specialist for reliable ICH stability testing in the pharmaceutical industry: the KBF handles all long-term tests, accelerated tests, and extreme condition tests. It meets all key ICH requirements, from precision to programming and documentation. Flexible water supply options for all installation locations. Additionally, the new KBF consumes up to 40% less energy than its predecessor. With optional lighting modules, the KBF becomes an ICH photostability testing chamber or a plant growth chamber. KEY FEATURES Temperature range: 0°C to 70°C Humidity range from 10 to 80% RH Proven APT.line™ preheating chamber technology Up to 40% energy savings compared to the previous model Energy-efficient cooling with modern inverter refrigeration unit Cooling using environmentally friendly R-600a refrigerant Heated doors to prevent condensation Adjustable fan speed Humidity control with capacitive sensor and fast-responding steam humidification Robust housing with HIT sandwich technology Stainless steel inner chamber Inner doors made of safety glass with metal oxide coating Two stainless steel wire racks Access port 80 mm x 45 mm with silicone plug Dodpfx Aey R Uaaen Hekn Free-standing unit with durable double casters and front brakes Intuitive controller with touch screen for segment and real-time programming Ergonomically adjustable operating terminal Triangular indicator with illuminated status display Internal data logger; measurement values readable in open format via USB Independent Class 3.3 (DIN 12880) temperature safety device with optical and acoustic alarm Device self-test for comprehensive status analysis Data exchange interfaces: Ethernet, USB Optional lighting modules for ICH photostability testing Optional LED lighting modules for plant cultivation

Būklė: labai geros būklės (naudotas), veikimo valandos: 100 h, PERFECT CONDITION, purchased in December 2016 Used for approximately 100 hours Price new: 46,808 EUR The BINDER MKF series environmental simulation chamber is perfectly suited for all cold and heat testing based on recognized temperature and climate test standards in accordance with DIN and IEC norms. High operating comfort and comprehensive standard equipment offer clear advantages for everyday use. Key features Temperature range: -40 °C to 180 °C Humidity range: from 10 to 98% RH Djdpfsvldnqex An Hokn Built-in 20 L water reservoir 4 potential-free relay contacts Preheating chamber technology e™ Programmable anti-condensation protection for samples Heated observation window with internal LED lighting Humidity control with capacitive humidity sensor and steam humidification BINDER Multi Management Software APT-COM™ 4 Basic Edition Diagnostic system with optical and acoustic alarm Intuitive controller with touch screen, featuring segment and real-time programming Internal data logger; measurement values in open format, readable via USB 2 access ports with 80 mm silicone plugs, left and right side Independent, adjustable class 2 (DIN 12880) temperature safety device with optical alarm 4 castors, two with brakes 230 V socket on the right side panel Ramp function can be set Built-in line recorder Real-time clock Door heating Alarm notification in case of lack of water in the fresh water tank 1 stainless steel wire shelf Leak protection for inlet and outlet hoses up to 1 m height Stainless steel interior Halogen-free refrigerant R-404A Cooling provided by compressor condenser unit

Būklė: geras (naudotas), ESPEC Climate Test Chamber PL-3KPH Manufacturer: ESPEC Corp. Model: PL-3KPH Version: Air-cooled temperature and climate test chamber For sale is a pre-owned ESPEC climate test chamber for temperature and environmental testing in research, development, quality assurance, and industrial applications. Technical Data: Test chamber volume: approx. 400 liters Temperature range: approx. -40 °C to +180 °C Humidity range: approx. 20% to 98% RH Internal dimensions (W x H x D): approx. 600 × 850 × 800 mm External dimensions (W x H x D): approx. 1010 × 1690 × 1195 mm Electrical connection: AC 400 V / 3~ / 50 Hz Max. current consumption: approx. 11 A Weight: approx. 350 kg Cooling: air-cooled No external water connection required Refrigerant (as per label): R452A – approx. 1.2 kg Equipment: Touchscreen control Programmable and constant operation modes Temperature and humidity control Observation window in the door Stainless steel test chamber interior Interior illumination / chamber lamp Lateral cable/pipe port, Ø approx. 100 mm Overheat protector Integrated hour meter RS-232C interface Water tank system Specimen power supply control Time signal connector Condition: Dedpfoy N Awqex An Hjkn Used device with age- and use-related signs of wear. Some rust and corrosion visible at the lower housing area. Signs of use present inside the chamber. See photos for cosmetic condition. Scope of Delivery: ESPEC climate test chamber PL-3KPH One shelf included Scope of delivery as shown Service: Function check and replacement of necessary components Recharging with compliant refrigerant as required Leak test with certification Documented test run Notes: Inspection possible by appointment. Loading can be arranged. Commercial sale – sold without warranty. Subject to change and errors.

Būklė: naudotas, rida: 10 km, galia: 132 kW (179,47 AG), pirmoji registracija: 04/2026, kuro tipas: dyzelinas, tuščias svoris: 2 212 kg, didžiausias leistinas svoris: 1 288 kg, bendras svoris: 3 500 kg, padangos dydis: 215/70R15C, ašių konfigūracija: 4x2, ratų bazė: 4 035 mm, kita apžiūra (TÜV): 04/2028, CO₂ emisijos: 166 g/km, kuro sąnaudos (mieste): 7,7 l/100 km, kuro sąnaudos (užmiestyje): 5,9 l/100 km, kombinuota degalų sąnauda: 6,6 l/100 km, spalva: balta, pavaros tipas: automatinis, pakaba: plienas, sėdimų vietų skaičius: 3, bendras ilgis: 5 998 mm, krovinio erdvės tūris: 13 m³, krovimo vietos ilgis: 3 705 mm, krovinių skyriaus plotis: 1 870 mm, krovos erdvės aukštis: 1 932 mm, Gamybos metai: 2026, priekinės padangos dydis: 215/70R15C, galinės padangos dydis: 215/70R15C, Įranga: ABS, borto kompiuteris, centrinis užraktas, elektroninė stabilumo programa (ESP), imobilaizerio sistema, kabina, kruizo kontrolė, naudoto automobilio garantija, navigacijos sistema, oro kondicionavimas, oro pagalvė, priekabos jungtis, priešrūkiniai žibintai, stumdomos durys, suodžių filtras, trauki kontrolė, žemas triukšmo lygis,

Būklė: naujas, galia: 132 kW (179,47 AG), kuro tipas: dyzelinas, tuščias svoris: 2 212 kg, didžiausias leistinas svoris: 1 288 kg, bendras svoris: 3 500 kg, padangos dydis: 215/70R15C, ašių konfigūracija: 4x2, ratų bazė: 4 035 mm, CO₂ emisijos: 166 g/km, kuro sąnaudos (mieste): 7,7 l/100 km, kuro sąnaudos (užmiestyje): 5,9 l/100 km, kombinuota degalų sąnauda: 6,6 l/100 km, spalva: balta, pavaros tipas: automatinis, pakaba: plienas, sėdimų vietų skaičius: 3, bendras ilgis: 5 998 mm, krovinio erdvės tūris: 13 m³, krovimo vietos ilgis: 3 705 mm, krovinių skyriaus plotis: 1 870 mm, krovos erdvės aukštis: 1 932 mm, Gamybos metai: 2026, priekinės padangos dydis: 215/70R15C, galinės padangos dydis: 215/70R15C, Įranga: ABS, borto kompiuteris, centrinis užraktas, elektroninė stabilumo programa (ESP), imobilaizerio sistema, kabina, kruizo kontrolė, naudoto automobilio garantija, navigacijos sistema, oro kondicionavimas, oro pagalvė, priešrūkiniai žibintai, stumdomos durys, suodžių filtras, trauki kontrolė, žemas triukšmo lygis,

Būklė: naudotas, rida: 10 km, galia: 132 kW (179,47 AG), pirmoji registracija: 04/2026, kuro tipas: dyzelinas, tuščias svoris: 2 212 kg, didžiausias leistinas svoris: 1 288 kg, bendras svoris: 3 500 kg, padangos dydis: 215/70R15C, ašių konfigūracija: 4x2, ratų bazė: 4 035 mm, kita apžiūra (TÜV): 04/2028, CO₂ emisijos: 166 g/km, kuro sąnaudos (mieste): 7,7 l/100 km, kuro sąnaudos (užmiestyje): 5,9 l/100 km, kombinuota degalų sąnauda: 6,6 l/100 km, spalva: balta, pavaros tipas: automatinis, pakaba: plienas, sėdimų vietų skaičius: 3, bendras ilgis: 5 998 mm, krovinio erdvės tūris: 13 m³, krovimo vietos ilgis: 3 705 mm, krovinių skyriaus plotis: 1 870 mm, krovos erdvės aukštis: 1 932 mm, Gamybos metai: 2026, priekinės padangos dydis: 215/70R15C, galinės padangos dydis: 215/70R15C, Įranga: ABS, borto kompiuteris, centrinis užraktas, elektroninė stabilumo programa (ESP), imobilaizerio sistema, kabina, kruizo kontrolė, naudoto automobilio garantija, navigacijos sistema, oro kondicionavimas, oro pagalvė, priešrūkiniai žibintai, stumdomos durys, suodžių filtras, trauki kontrolė, žemas triukšmo lygis,

Būklė: labai geros būklės (naudotas), ESPEC Climate Test Chamber PL-3KPH Device Data Manufacturer: ESPEC Model: PL-3KPH Design: Climate Test Chamber Cooling: Air-cooled Description Used climate test chamber from ESPEC. Suitable for temperature and humidity testing. Applications in research, development, and quality assurance. Operating Condition Display: STOP / Ready for operation. Technical Data Dsdoy H H Iujpfx An Hekn Temperature range: -40 °C to +180 °C Humidity range: 20 % to 98 % RH Test chamber volume: approx. 400 liters Dimensions Interior (W x H x D): 600 x 850 x 800 mm Exterior (W x H x D): 1010 x 1690 x 1195 mm Electrical Data 400 V / 3~ / 50 Hz Refrigeration System Refrigerants: R404A / R23 Two-stage cooling system Air-cooled (no external water connection required) Weight Approx. 350 kg Equipment Touchscreen control panel Program mode and constant mode BTHC temperature and humidity control Observation window Stainless steel test chamber Interior lighting Cable port Overheat protection Hour meter Industrial design Scope of Delivery ESPEC Climate Test Chamber PL-3KPH Scope of delivery as pictured Optional Pre-shipment Service Functional test Refrigerant service Leak test Test run with protocol Condition Used. Condition as shown in photos. Note Used equipment, sold without warranty. Viewing by appointment possible. Loading and transport can be organized upon request. Subject to change and prior sale. If you have any questions, please feel free to contact us.

Gamybos metai: 2011, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Parduodama klimatinė bandymų kamera KPK 200. Įrenginys yra labai geros būklės, galima naudoti iš karto. Techniniai duomenys: Pagaminimo metai: 2011 Bandymų kameros vardinis tūris: 280 dm³ Išoriniai bandymų kameros matmenys: 1500 x 2040 x 1075 mm Minimalūs įnešimo matmenys: 2060 x 1095 mm Pašalinus ventiliatoriaus variklį ir duris: 1500 x 1940 x 925 mm Vidinis bandymų tūris: 720 x 690 x 560 mm Dkjdpsy E Ilxsfx An Hon Durų šviesos plotis: 720 x 690 mm Įšildomas matymo langas: 500 x 600 mm Lentynų skaičius: 3 vnt. Didžiausia leistina apkrova: 90 kg (tolygiai paskirstyta 3 lentynoms) Didžiausia apkrova vienai lentynai: 30 kg Bandomosios kameros medžiaga: nerūdijantis plienas Wst.-Nr. 1.4301

Būklė: labai geros būklės (naudotas), Memmert Model: CTC 256 Memmert Climate Test Chamber CTC 256 Temperature & Humidity Test Chamber Industrial quality For sale is a high-quality climate/temperature test chamber from the manufacturer Memmert, model CTC 256. The unit comes from professional use and is ideally suited for laboratories, industry, research, development, and quality assurance. The Memmert CTC 256 is used for the precise simulation of temperature and climate conditions. It enables both cooling and heating processes, and in this version, also the control of humidity. This makes the unit perfect for material tests, aging tests, climate stress tests, and long-term experiments under defined environmental conditions. Thanks to the integrated controller, complex test programs with temperature and time profiles can be configured. The forced air system ensures even temperature distribution in the interior. Measurement data can be documented and externally processed via available interfaces. Features: Temperature and climate test chamber (Heating & Cooling) - Humidity control Electronic controller with programmable functions Forced air circulation for uniform temperature distribution Internal data logger USB and Ethernet interfaces Additional 230 V socket Cable port (side) Water reservoir system (humidification/condensate) Mobile on casters Technical Data: Manufacturer: Memmert Model: CTC 256 Device type: climate test chamber Temperature range: approx. -42 °C to +190 °C Internal volume: approx. 256 liters Operating voltage: 3N~ 400 V / 50 Hz Current consumption: approx. 10.6 A Power consumption: approx. 7000 W Djdpfxey D Ni Ao An Hokn Protection class: IP20 External dimensions (approx.): 898 x 1730 x 1100 mm (W x H x D) Internal dimensions (approx.): 640 x 670 x 597 mm (W x H x D) Weight: approx. 300–350 kg Condition: used Scope of supply: (See picture) Memmert CTC 256 climate test chamber Shelving grids Water canister Documentation Delivery as shown (Changes and errors in technical data and details excepted!) If you have any further questions, please feel free to contact us by phone.

Būklė: labai geros būklės (naudotas), CTS Type: C-40/350 Climate Test Chamber, Air-Cooled For sale is a professional CTS climate test chamber, model C-40/350. This unit is engineered for demanding environmental simulation in industrial applications, making it ideal for material testing, electronics, automotive, aerospace, and research purposes. Temperature Testing: Temperature range: -40°C to +180°C Temperature deviation: ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 3.5 K/min Cooling: 4 K/min Heat compensation: Approx. 3500 W at +20°C Approx. 2000 W at -20°C Climate Testing: Dkedpfx Anex Ekups Hon Temperature range: +10°C to +90°C Humidity range: 10% to 95% relative humidity Dew point range: +5°C to 78°C Temperature deviation: ≤ 1.0 K over time Humidity deviation: ≤ ±3.0% rel. humidity over time These technical specifications refer to an ambient temperature of +25°C, rated voltage 400V, without test load, without heat compensation, and without additional equipment. Options may affect performance. Technical design: Refrigeration unit: Air-cooled, low-noise, fully hermetic, continuously variable capacity control by electronic monitoring and control system, environmentally friendly refrigerant R404A Test chamber: Floor load capacity 150 kg/m² Grid shelf: Stainless steel, support surface 620 x 600 mm Maximum load per shelf: 35 kg Maximum total load (full shelf configuration): 100 kg Control system: 32-bit controller LCD control panel Digital display of set and actual values Numeric input of set values Error messages in plain text RS 232 interface Ethernet interface Free switching channels for external test item control Dimensions: Test volume: 350 liters Internal dimensions: height 750 mm × width 650 mm × depth 720 mm External dimensions: height 1800 mm × width 920 mm × depth 1670 mm Operating data: Electrical connection: 400V 3/N, 50 Hz Rated power: 7.1 kW Rated current: 11.5 A Protection class: IP 54 Sound pressure level: -

Būklė: labai geros būklės (naudotas), CTS CW‑60/5.5 – Climate Test Chamber, Water-Cooled The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for temperature and humidity testing of multiple specimens simultaneously. Device Description: The climate test chamber enables evaluation of the function or material properties of test objects under the influence of temperature and humidity. Efficient air circulation with a correspondingly high airflow ensures excellent transfer conditions to the test item. The air-handling module is located at the rear of the chamber. The plant aggregates are mounted in a separate frame behind the unit for easy access. The control system is housed in a separate control cabinet, with the operating panel integrated into the cabinet door. For dehumidification, the chamber is equipped with a self-regenerating compressed air dryer. The test chamber can be purged with fresh air via a blower. Technical Specifications: Temperature Tests: - Temperature range: -60 °C to +100 °C - Temperature fluctuation: ±0.5 to 1 K over time - Temperature change rate (linear, with specimen and radiation, measured at supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climate Tests: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5°C to +89°C - Temperature accuracy: ±0.5 K over time - Humidity deviation: ±1 to ±3% r.h. over time Technical data refers to an ambient temperature of +25 °C, rated voltage 400 V, without test item, no radiant load, and without auxiliary equipment. Dimensions: Interior (test/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External dimensions: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: Dodpfx Ansx Eabpe Hskn - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection class: IP 54 Technical Design: - Refrigeration unit: water-cooled, low-noise, semi-hermetic - Infinitely variable capacity control via electronic monitoring and control system - Environmentally friendly refrigerants R 23 / R 404 A Notes: - Viewing available by appointment (46325 Borken) - Shipping by freight carrier possible – costs & arrangements upon request - Scope of delivery: (see image) (Subject to changes and errors in technical data and descriptions!) Feel free to contact us by phone with any further questions.

Būklė: labai geros būklės (naudotas), CTS CW-60/5.5 – Water-Cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Device Description This climate test chamber allows functionality or material properties of a test item to be evaluated under varying temperature and humidity conditions. Efficient air circulation with a correspondingly high recirculation volume ensures optimal transfer to the specimen. The air handling section is located at the rear of the chamber interior. The aggregates are housed in a separate frame at the back of the device and are easily accessible. The control system is located in a separate switchgear cabinet, with the control panel mounted on the cabinet door. For dehumidification, the chamber is equipped with a self-regenerating compressed air dryer. The test space can also be purged with fresh air via a blower. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear, with specimen and radiant heat, measured at supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5°C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 - ±3% r.H. over time Technical data based on an ambient temperature of +25 °C, nominal voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: Interior (test space/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Interior dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm Exterior dimensions: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power consumption: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A - Protection class: IP 54 Technical Execution: - Cooling unit: water-cooled, low noise, semi-hermetic - Infinitely variable power adjustment via electronic monitoring and control system - Uses environmentally-friendly refrigerants R 23 / R 404 A Notes: - Inspection by appointment (46325 Borken) - Shipping via freight forwarding available – cost & arrangements on request Dkedpsx Eaxbsfx An Hjn - Scope of delivery: (see picture) (Subject to modifications and errors in technical data and information!) For further questions, feel free to contact us by phone.

Būklė: labai geros būklės (naudotas), CTS CW-60/5.5 – Climate Test Chamber, Water-Cooled The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed to perform temperature and humidity testing on multiple test specimens simultaneously. Device Description The climate test chamber enables the functional or material properties of a test object to be tested under the influence of temperature and humidity. Efficient air circulation with a high recirculation volume ensures effective climatic transfer to the specimens. The air handling unit is located at the rear of the chamber interior. The refrigeration units are positioned behind the machine in a separate frame and are easily accessible. The controller is housed in a separate control cabinet, with the control panel integrated into the cabinet door. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The test space can be purged with fresh air via a blower. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Linear temperature change rate with test specimen and radiant heat, measured in the supply air - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climate Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ± 0.5 K over time - Humidity deviation: ±1 – ±3% r.H. over time The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimen, no radiant heat, and without additional accessories. Dimensions: Internal Dimensions (Test / Usable Space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2300 mm; Width: 1600 mm; Depth: 1550 mm External Dimensions: - Height: 2800 mm; Width: 2250 mm; Depth: 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (including 5 outlets) - Rated current: 86.0 A - Protection class IP 54 Technical Features: Refrigeration Unit - Water-cooled, low noise, semi-hermetic design - Infinitely variable power adjustment via electronic monitoring and control system Dodpfx Aox D Abpen Hekn - Environmentally friendly refrigerants R23 / R404A Notes Viewing by appointment possible (46325 Borken) Shipping via forwarding agent possible – costs & arrangements on request Scope of delivery: (see photo) (Subject to changes and errors in the technical data, specifications subject to confirmation!) Please feel free to contact us by phone for further questions.

Būklė: naudotas, For sale or free of charge are 3 climate smoke chambers manufactured by AUTOTHERM, including accessories. The units are ideally suited for meat and food processing, especially for cold smoking. Technical data / equipment: Chamber 1: approx. 8 racks (W approx. 2.10 m x D 5 m) Chamber 2: approx. 10 racks (W approx. 2.10 m x D 6 m) Chamber 3: approx. 12 racks (W approx. 2.10 m x D 7 m) Dkjdpfx Ajyw Hl Isn Hon Cold smoking system with 2 smoke generators (Goliat, sawdust) Temperature range up to approx. +22 °C (hot water heat exchanger) Humidity control available Cooling coil (R232, R404) Some refrigeration compressors available Construction: Air ducts, wall cladding and control cabinet made of V2A (stainless steel) Condition: Electronics / controls currently not functional Control cabinet available Condition as per photos Additional systems / accessories: Wooden smoke sticks 2 boilers Cooking cabinet (for 2 racks) Cleaning machine (defective) Freezer Important notes: Available free of charge Dismantling and transport are to be carried out by the buyer Viewing by appointment possible

Būklė: labai geros būklės (naudotas), Weiss Model: EmissionEvent VOC/240 Weiss Technik EmissionEvent VOC/240 Industrial Emission Test Chamber / VOC Test Chamber / Climatic Test Chamber Water-cooled For sale is a professional emission test chamber Weiss Technik EmissionEvent VOC/240 (year of manufacture: 2018) from an industrial laboratory and testing environment. The unit is designed for standard-compliant emission tests under precisely controlled temperature, climate, and process conditions, and is built for continuous use in laboratory, industrial, and quality assurance applications. What does VOC mean / What does the unit do? VOC = Volatile Organic Compounds The unit measures and tests the outgassing (emission) of materials under defined conditions. It is used to determine which substances a material releases into the air. Typical applications: - Emission testing of plastics, components, materials - Automotive interior material tests (odor / pollutants) - Building products & furniture emissions - Packaging, textiles, adhesives, coatings - Quality control and standard-compliant testing (e.g. ISO / VDA / DIN) The test system generates precisely defined temperature, humidity, and air parameters. Emissions are extracted from the test chamber using a carrier gas (e.g. nitrogen or air) and can then be measured with analytical instruments. Features / Equipment: - Stainless steel emission test chamber (hermetically sealed) - Temperature and climate control - Carrier gas system for emission measurements - Automated process control with touch panel - Programmable operation / continuous operation possible - Sampling ports for VOC analysis - Industrial-grade design (for laboratory & continuous operation) Specifications for temperature testing: Temperature range: +20 to +130 °C Temporal temperature deviation at test volume center: ±0.1 to ±0.3 K Spatial temperature homogeneity: ±0.1 to ±0.5 K Temperature change rate (per IEC 60068-3-5): Heating: 0.4 K/min Cooling: 0.3 K/min Dedeyhfg Dopfx An Hskn Enhanced heating/cooling performance (average): Heating up to +65 °C: 1.5 K/min Cooling from +65 °C to +20 °C: 1.3 K/min Specifications for climate testing: Temperature range: +20 to +130 °C Dew point range: +5 to +60 °C Humidity range: 5 to 95% rH Temporal temperature deviation: 0.1 to 0.3 K Temporal humidity deviation: -3 to +3% rH Dimensions EmissionEvent VOC/240 External dimensions (unit): Width: approx. 1350 mm, Depth: approx. 2500 mm, Height: approx. 1985 (2190) mm Internal dimensions (test chamber): Emission test volume: 200 l Gross test volume: 240 l Net test volume: 208 l Max. test specimen weight: 80 kg Internal dimensions VOC/240: Width: approx. 600 mm, Depth: approx. 560 mm, Height: approx. 600 mm Electrical: - Voltage: 3/N/PE AC 400 V ±10 % / 50 Hz - Rated power: 12.1 kW - Rated current: 30 A - Protection class: IP54 Refrigerant: R134a – 2.5 kg Weight: approx. 1080 kg Buyer Assurance—Key Points for Our Test Chambers: 1. Functional check and replacement of necessary components 2. New, legally compliant refrigerant filling if necessary 3. Leak test with certificate 4. After successful inspection, the chambers are subject to a documented test run. Condition: used Scope of delivery: (see image) (Technical specifications subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Būklė: labai geros būklės (naudotas), Espec Model: PL-2KPH ESPEC PL-2 KPH Climate Chambers, air cooled Temperature range: -40°C to +180°C Humidity range: approx. 10 to 98% RH Dependency on temperature range and humidity fluctuation: ± 2.5% RH over time ± 3.0% RH Internal dimensions: Width 500 × Height 750 × Depth 600 mm External dimensions: Width 910 × Height 1590 × Depth 973 mm Microprocessor control with 10 internationally pre-set test standards and 20 freely programmable memory slots, as well as integrated timer with program start/stop automation and error code display, programming via touch screen. Alarm indicator (acoustic and visual) Device protection in case of overtemperature Overtemperature protection with 2 switching contacts Test chamber lighting Operating hours counter Test chamber volume: 225 l Weight: 300 kg net Electrical connection: 400 V 3/N 50 Hz Plug: CEE 16 A, max. current consumption: 11.0 A Refrigerant: R404A Scope of delivery: Espec climate test chamber Important safety information for you as a buyer! The following points are carried out on all chambers offered by us prior to sale: 1. Functional test and replacement of necessary components 2. New refill with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Dkedpfx Aox Iu I Son Hen Condition: used Scope of delivery: see image (Changes and errors in technical data and specifications reserved!) If you have further questions, we will be happy to answer them by phone.

Būklė: geras (naudotas), Vötsch Model: VCS 7034-5 Climate Test Chamber, Water-cooled Vötsch VCS 7034-5 Test Chamber Volume: 335 litres Specifications for Temperature Testing: Temperature Range: -70 to +180°C Temporal Temperature Deviation: ±0.1 to ±0.5 K Spatial Temperature Deviation: ±0.5 to ±2.0 K Temperature Gradient: 1 to 4 K Change Rate: Cooling: 6.7 K/min Dkedpeuudx Djfx An Hjn Heating: 6.8 K/min Heat Compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature Calibration Points: +23°C and +80°C Specifications for Climatic Testing: Temperature Range: +10 to +95°C Temporal Temperature Deviation: ±0.1 to ±0.3 K Spatial Temperature Deviation: ±0.5 to ±1.0 K Temperature Gradient: 1 to 2 K Humidity Range: 10 to 98% Temporal Humidity Deviation: ±1 to ±3% Dew Point Range: -3 to +94°C Heat Compensation: 400 W Climatic Calibration Points: +23°C / 50% r.h. and +95°C / 50% r.h. Test Chamber Dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External Dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Electrical Connection: 3/N/PE AC, 400 V ±10%, 50 Hz Rated Power: 10 kW Rated Current: 21 A Sound Pressure Level: 64 dB(A) Cooling Water Consumption: 1.4 m³/h Refrigerants: R-404A / R-23 Condition: used Scope of Delivery: (See picture) (Changes and errors in the technical data and specifications are reserved!) Further questions can be answered by phone.

Būklė: naudotas, Type: CS-70/900 CTS Climate Test Chamber with Humidity, Water-cooled (converted to refrigerant R-452a) Temperature range: -70°C to +180°C Humidity range: 10–98% r.H. Test chamber dimensions: Height approx. 870 mm / Width approx. 1000 mm / Depth approx. 1000 mm External dimensions: Height approx. 1950 mm / Width approx. 1200 mm / Depth approx. 2220 mm Control cabinet: Height approx. 2100 mm / Width approx. 800 mm / Depth approx. 400 mm Test chamber volume: 900 liters Refrigerants: R-452a / R23 Electrical connection: 400 V +6/-10%, 3/N, 50Hz Connected load: 21.2 kW, Rated current: 35.7 A Climate test chamber weight: 900 kg Control cabinet weight: 150 kg Important safety information for the buyer! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components Dodpfx Anjxb Dm Is Hokn 2. If required, refilling with compliant refrigerant in accordance with legal standards 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical specifications and data!) If you have any further questions, we would be happy to answer them by phone.

Būklė: labai geros būklės (naudotas), Weiss Type: WK3-2200/40/5/V Weiss Climate Test Chamber, Water-Cooled Data for Temperature Testing: Temperature range: -40°C to +180°C Temperature change rate: Heating 6.0 K/min Cooling 11.5 K/min Temperature deviation: Over time: ± 0.8 K Spatial: ± 2.0 K Heat compensation max. 8000 W Data for Climate Testing: Temperature range: +10°C to +95°C Dew point temperature range: +4°C to +94°C with closed floor element Humidity range: 10 to 95% r.h. Temperature deviation over time: ± 0.3 K Humidity deviation over time: ± 3% r.h. Temperature uniformity: Spatial: ± 1.0 K Heat compensation max. 500 W Test chamber volume: 2160 liters Test chamber dimensions: Height 1115 mm, Width 1400 mm, Depth 1400 mm External dimensions (lowered): Height 2318 mm, Width 1860 mm, Depth 3658 mm External dimensions above shaker: Height 2710 mm External dimensions max. stroke height: 3038 mm Interchangeable floor dimensions: Width 1600 mm, Depth 1504 mm Operating Data: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 38.0 kW Dsdsw I Rxrepfx An Hokn Rated current: 63.0 A Customer-side circuit protection: 80 A slow-blow Refrigerant: R 404A Weight: approx. 2100 kg For your safety as a buyer, please note the following information! The following steps are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications and details subject to change or error!) We are happy to answer any further questions by phone.