Klimatinė bandymų kamera -42 iki +190°C

Memmert CTC 256 256 Liter

Gamybos metai: 1992, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 20281, Offer 23034 Technical Data: - Max. grinding length approx. 350 mm Bsdpsklxwkofx Af Aowl - Max. grinding width 150 mm - Max. installation height with / without magnet 150 / 210 mm - Grinding wheel stroke approx. 200 mm - Clamping surface 300 x 160 mm - Magnetic chuck 250 x 150 mm - Grinding wheel dimensions approx. 200 x 80 x 78 mm - Grinding wheel speed 2800 rpm - Swivel range of the grinding arm approx. 180° - Manual swivel arm clamping via clamp lever - Wet grinding device - Drive 400 V / 1.85 kW - Required space approx. W 850 x H 1650 x D 800 mm - Weight approx. 350 kg

Būklė: naudotas, Gamybos metai: 1998, Techninės detalės: Profilio aukštis: 180 mm Didžiausias šlifavimo disko skersmuo: 200 mm / puodelio formos diskas Šlifavimo disko skylė: nenurodyta Šlifavimo veleno apsisukimai: 2800 aps./min Stalo dydis (IxP): 500 x 160 mm Darbinė įtampa: 220 / 380 V Bendras galios poreikis: 3,0 kW Mašinos svoris apie: 0,57 t Mašinos matmenys (IxPxA): 1,28 x 1,0 x 1,75 m Pritaikymas priekinio paviršiaus šlifavimui Magnetinė stalo dalis: IxP = 680 x 200 mm; pakreipimas apie 15°; pasukimas 360° per radialinę skalę Magnetas: tipas S2D; pastovus magnetas, tvirtinimo paviršius 300 x 150 mm Šlifavimo disko laikiklis: - vertikalus reguliavimas = 180 mm rankinis; pasukimas apie 45° į dešinę/kairę rankinis Valdymas per valdymo pultą prie mašinos. Aušinimo skysčio talpa su pompa ir tiekimu Bjdpfx Afou Ngrqe Ajwl

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Puodelinė šlifavimo staklė Gamintojas: Delta Tipas: LF-350 Šlifavimo ilgis: apie 360 mm Šlifavimo plotis: apie 155 mm Maks. šlifavimo aukštis: apie 280 mm Magnetinio stalo matmenys: 350 x 150 mm Pavaros galia: apie 3 kW Šlifavimo veleno greitis: apie 2840 aps./min Šlifavimo disko matmenys: apie Ø 200 x 80 x 78 mm Z ašies padavimas: rankinis Šlifavimo judesys: rankinis Įranga: Magnetinis stalas Šlifavimo diskas Šlifavimo disko apsauga Bjdpjv Tqugofx Af Aewl Apsauginis aptvaras nuo purslų Reikalinga erdvė: 1200 x 1200 x 1800 mm (I x P x A) Svoris: apie 450 kg Mašina gali būti išbandyta / pademonstruota vietoje, prijungus prie elektros. Visa informacija pateikiama be garantijos. Pasiliekama teisė į tarpinį pardavimą. Pirkinys parduodamas be jokios garantijos. Išimtis taikoma tik nuostoliams, patirtiems dėl šiurkštaus ar tyčinio pardavėjo pareigų pažeidimo, bei žalai gyvybei, kūnui ar sveikatai.

Būklė: Defektas atsarginių dalių laikiklis (naudotas), Vickers Type: HVS 1000 The digital micro Vickers hardness tester HVS 1000 features a unique and precise design across mechanics, optics, and light source, enabling it to deliver a clearer impression image and thus more accurate measurement. Main Purpose and Fields of Application: 1. Iron and steel, non-ferrous metals, metal foils, hard alloys, sheet metal, microstructures 2. Carburizing, nitriding and decarburization layers, surface hardening layers, plating, coatings 3. Glass, wafers, ceramic materials Specifications: Model: HVS1000 Type: Digital Micro Hardness Tester Test Loads (N): 0.098 / 0.246 / 0.49 / 0.98 / 1.96 / 2.94 / 4.90 / 9.80 Test Loads (kgf): 10 / 25 / 50 / 100 / 200 / 300 / 500 / 1000 Load Control: Automatic loading and release Turret (Objective/Indenter): Manual Dwell Time (s): 0~60 Microscope Magnification: 400x for measurement (Objective 40x, Eyepiece 10x); 100x for observation (Objective 10x, Eyepiece 10x) Micrometer Resolution (μm): 0.01 Test Range: 5 HV~3000 HV XY Test Table Dimensions: 100 x 100 mm XY Test Table Travel: 25 x 25 mm Max. Sample Height: 120 mm Max. Sample Width: 110 mm Hardness Conversion: HK, HRA, HRB, HRC, HRD, HR15N, HR30N, HR45N, R15T, HR30T, HR45T, HV, HBW Output: Built-in printer, RS232 interface Power Supply: 220V, 60/50Hz Dimensions (mm): 441 x 270 x 480 Net Weight (kg): 35 Condition: used Scope of delivery: (see picture) Bsdpforr Sqpsx Af Ajwl (Subject to changes and errors in technical data, all specifications without obligation) Further questions? We would be happy to answer them for you by phone.

Būklė: labai geros būklės (naudotas), Memmert Model: UFP 800 Standard Equipment - Electronic, fuzzy-supported PID process controller with continuous performance adjustment and a time-saving self-diagnosis system for rapid error detection (see chapter "Error messages") - Language selection - Alphanumeric text display - Internal log memory with 1024 kB for storing actual temperature, set temperature, air turbine, air damper, and error states with time stamp - Device control and logging of actual values via MEMoryCard XL - Program sequence control for up to 40 ramp segments - Adjustable air turbine for air circulation chambers (adjustable in 10% increments) - Motorized adjustable air damper (adjustable in 10% increments) for recirculation or fresh air mode Bjdsymm Erspfx Af Aswl - Integrated weekly timer with group function (e.g. for all working days) - Retractable push/turn control knob for easy device operation - Optical alarm indicator - Built-in buzzer as alarm in case of limit exceedance, as an acoustic signal at program end, and for input confirmation (button click) - Digital monitoring controller for overtemperature, undertemperature, and automatic setpoint tracking monitoring (ASF) - Mechanical temperature limiter (TB Safety Class 1) - Monitoring relay for heater shut-off in case of error - Two separate PT100 temperature sensors, DIN Class A, 4-wire design, for control and monitoring - Convenient integrated 3-point temperature adjustment - Temperature-dependent control chamber and door ventilation - Parallel printer interface (PCL3 compatible) - Serial RS-232C interface for computer-based temperature control programs and for retrieving the controller’s internal log memory Technical Data: Chamber: Made of stainless steel, deep-drawn ribbed, highly robust and easy to clean. Casing (outer body): Structured stainless steel, rear panel made of galvanized steel sheet. UFP 800 is mobile and lockable on wheels. External dimensions: Width 1190 mm, Depth 750 mm, Height 1620 mm Internal dimensions: Width 1040 mm, Depth 600 mm, Height 1200 mm Volume: approx. 749 liters Weight: approx. 170 kg Power supply: 3N~ 400 V 50/60 Hz Power consumption: approx. 4800 W, 7A Condition: used Scope of delivery: (see photo) (Subject to change and error in technical details and information!) For further questions, please contact us by phone.

Būklė: labai geros būklės (naudotas), CTS Type: C-40/350 Climate Test Chamber, Air-Cooled For sale is a professional CTS climate test chamber, model C-40/350. This unit is engineered for demanding environmental simulation in industrial applications, making it ideal for material testing, electronics, automotive, aerospace, and research purposes. Bedpfx Afox Ekupj Aewl Temperature Testing: Temperature range: -40°C to +180°C Temperature deviation: ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 3.5 K/min Cooling: 4 K/min Heat compensation: Approx. 3500 W at +20°C Approx. 2000 W at -20°C Climate Testing: Temperature range: +10°C to +90°C Humidity range: 10% to 95% relative humidity Dew point range: +5°C to 78°C Temperature deviation: ≤ 1.0 K over time Humidity deviation: ≤ ±3.0% rel. humidity over time These technical specifications refer to an ambient temperature of +25°C, rated voltage 400V, without test load, without heat compensation, and without additional equipment. Options may affect performance. Technical design: Refrigeration unit: Air-cooled, low-noise, fully hermetic, continuously variable capacity control by electronic monitoring and control system, environmentally friendly refrigerant R404A Test chamber: Floor load capacity 150 kg/m² Grid shelf: Stainless steel, support surface 620 x 600 mm Maximum load per shelf: 35 kg Maximum total load (full shelf configuration): 100 kg Control system: 32-bit controller LCD control panel Digital display of set and actual values Numeric input of set values Error messages in plain text RS 232 interface Ethernet interface Free switching channels for external test item control Dimensions: Test volume: 350 liters Internal dimensions: height 750 mm × width 650 mm × depth 720 mm External dimensions: height 1800 mm × width 920 mm × depth 1670 mm Operating data: Electrical connection: 400V 3/N, 50 Hz Rated power: 7.1 kW Rated current: 11.5 A Protection class: IP 54 Sound pressure level: -

Būklė: labai geros būklės (naudotas), Type: UF 450plus Air circulation: forced convection Temperature Temperature range: +20 °C to +300 °C Working range: at least +10 °C above ambient temperature Setting accuracy: up to 99.9 °C: 0.1 °C from 100 °C: 0.5 °C Temperature sensors: 2× Pt100 (DIN Class A, 4-wire) Internal Chamber and Capacity Volume: 449 liters Internal dimensions (W × H × D): 1040 × 720 × 600 mm Maximum number of shelves: 8 Load per shelf: 30 kg Maximum total load: 300 kg Internal chamber: stainless steel, all-around heating External Dimensions and Weight External dimensions (W × H × D): approx. 1224 × 1247 × 784 mm Net weight: approx. 160 kg Gross weight: approx. 185 kg Electrical Data Voltage: 400 V, 3-phase Power: approx. 5800 W Control and Regulation Controller: ControlCOCKPIT TwinDISPLAY Controller type: digital PID microprocessor Timer: 1 minute to 99 days Functions: SetpointWAIT, HeatBALANCE, 3-point temperature calibration Adjustable parameters: temperature, fan speed, exhaust air flap, time programs Ventilation Recirculation: adjustable in 10% steps Fresh air: electronically adjustable Exhaust air: with throttle valve Bsdpfoyzzm Iox Af Aowl Communication Interfaces: Ethernet, USB Software: AtmoCONTROL Safety Temperature limiter (TB), protection class 1 Temperature monitor/limiter (TWW/TWB) selectable ASF system for over- and under-temperature monitoring Equipment Stainless steel door with 2-point locking Stainless steel housing Low-noise air turbine Rear side has 2 cable ports each approx. 12 cm diameter Condition: used Scope of delivery: (See image) (Subject to modification and errors in the technical data, information is subject to change!) If you have further questions, we will gladly answer them by phone. For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or obtaining information directly from the manufacturer.

Būklė: labai geros būklės (naudotas), Vötsch Model: VCS³ 7034-5 Vötsch Climate Test Chamber, Water-cooled With a temperature change rate of 5 K/min Technical data for temperature testing: Temperature range: -70°C to +180°C Temporal temperature deviation at the center of the usable space: ± 0.1 K to ± 0.5 K Spatial temperature deviation: ± 0.5 K to ± 2.0 K Temperature change rate: Heating: 6.8 K/min Cooling: 6.7 K/min Technical data for climate testing: Temperature range: +10°C to +95°C Temporal temperature deviation at the center of the usable space: ± 0.1 K to ± 0.3 K Spatial temperature deviation: ± 0.5 K to ± 1.0 K Relative humidity deviation (temporal) at the center of the usable space: ± 1% to ± 3% RH Humidity range: 10% to 98% RH (Extended climate range: 2°C/95% RH regulated for a maximum of 2 hours) External dimensions: Width 870 x Depth 1700 x Height 1775 mm Test chamber dimensions: Width 580 x Depth 765 x Height 750 mm Test chamber volume: approx. 335 liters Side ports: 50 mm Side ports: 125 mm Operational data: LED strip 24 V, 6.8 W / 2 x halogen bulb 24 V, 50 W Rated voltage: 3/N/PE AC 400 V ±10%, 50 Hz Rated power: 9 kW Rated current: 20 A Customer-supplied fuse: 63 A slow-blow Refrigerant: R404A/R-23 Bwjdpoygvn Nefx Af Aol Weight: approx. 570 kg For your safety as a buyer, please note the following information! The following steps are carried out on all chambers we offer prior to delivery: 1. Functional inspection and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors excepted!) If you have any further questions, please do not hesitate to contact us by phone.

Būklė: beveik kaip naujas (naudotas), Binder BD240 / Binder BD 240 – Laboratorinis inkubatorius Naudotas, geros būklės, patikrintas ir veikiantis. Inkubatorius su gravitacine konvekcija. Specializuotas įrenginys organizmų inkubavimui bei mikrobiologiniam šildymui ir kondicionavimui. Bwjdpfx Ajx A Elusf Asl Temperatūros diapazonas: nuo 5°C virš aplinkos temperatūros iki 100°C. Kaina už vienetą, yra 6 vnt.

Būklė: labai geros būklės (naudotas), We are offering a climate test chamber for sale. Water-cooled Test chamber volume: 350 liters Interior dimensions: Height 750 mm, Width 650 mm, Depth 720 mm External dimensions: Height 1800 mm, Width 850 mm, Depth 1640 mm Temperature operating range: Bwedpfx Aeygumkof Ael Temperature range: -70°C to +180°C Cooling rate: 3.0 K/min Heating rate: 5.0 K/min Climatic operating range: Temperature range: +10°C to +90°C Humidity range: +10% to 98% r.H. Dew point range: +5°C to 89.5°C Temperature deviation: ±0.1 - ±0.3 K over time Humidity deviation: ±1 - ±2% r.H. over time up to 90% r.H.; max. ±1 - 3% r.H. over time above 90% r.H. Electrical connection: 400V +6-10%, 3/N, 50Hz Connected load: 13 kW Rated current: 25.5 A Refrigerants: R404A / R23 Weight: 650 kg Model: CS-70/350 Important information for your peace of mind as a buyer! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a trial run monitored with calibrated equipment Condition: used Scope of delivery: (see picture) (Specifications are subject to change and errors excepted!) We are happy to answer further questions by phone.