Kk-Industries Cyl-St 140-25/4.0 pirkti naudotą (56 460)

Būklė: naujas, Bending length: 2600 mm Sheet thickness: 4 mm Top roll diameter: 140 mm Sheet length: 2,600 mm Technical specifications: - Rear roll is motor-driven - Cone bending device - Hardened and polished rolls - Entire frame made of St 52 steel - Asymmetric design for perfect bending - Top and bottom rolls powered by brake motors and planetary gearboxes inside the gearbox - Portable control panel - Compliant with CE standards Options: - Bottom roll driven by electric motor EURO 1,513 - Digital display for rear roll position EURO 1,010 - Extended rolls EURO 966 - Profile rolls EURO 1,190 Fedpfod Ab Nrox An Hepn We have numerous references!

Būklė: naujas, Bending length: 2,600 mm Sheet thickness: 6 mm Top roll diameter: 190 mm Sheet length: 2,600 mm Technical specifications: - Rear roll driven by motor - Conical bending device - Hardened and polished rolls - Entire frame made of St 52 steel - Asymmetric design for perfect bending - Top and bottom rolls driven by brake electric motors and planetary gearboxes - Portable control panel - In compliance with CE standards Options: - Bottom roll driven by electric motor EURO 1,925 - Digital display for position of the rear roll EURO 1,010 Fjdpfjd Ab Nkox An Hspn - Extended rolls EURO 966 - Profile rolls EURO 1,190 We have numerous references!

Būklė: naujas, Lenkimo ilgis: 3100 mm Lakšto storis: 4 mm Viršutinio volo skersmuo: 170 mm Standartinės savybės: - Atbulinis volas su varikliu Fpodped Ab Nmjfx An Hen - Kūginio lenkimo įtaisas - Grūdinti ir poliruoti volai - Korpusas iš ST 52 plieno - Viršutinį volą po lenkimo galima atidaryti į šoną, kad būtų lengva išimti medžiagą - Asimetrinis dizainas tobulam lenkimui - Tobuliems rezultatams užtikrinti viršutinį ir apatinį volus varo stabdžių elektros variklis bei planetinė pavarų dėžė - Atitinka CE normas - Nešiojamas valdymo pultas, leidžiantis valdyti mašiną iš bet kurios vietos PAPILDOMAI Vien. Kiekis Grynasis kaina (¤)Apatiniai volai su varikliu11.205 ¤Skaitmeninis indikatorius atbuliniam volui1815 ¤Prailginti volai1788 ¤

Būklė: naujas, Bending length: 2600 mm Sheet thickness: 7 mm Top roll diameter: 200 mm Technical specifications: Fpsdpfxsd Ab Ngs An Hjn - Rear roll driven by motor - Cone bending device - Hardened and polished rolls - Entire frame made of St 52 steel - Asymmetric design for optimal bending performance - Top and bottom rolls driven by brake electric motors and planetary gearboxes - Mobile control panel - CE compliant Options: - Bottom roll driven by electric motor EUR 2,200 - Digital display for rear roll position EUR 1,010 - Extended rolls EUR 966 - Profile rolls EUR 1,190 We have numerous references!

Būklė: naujas, Bending length: 2600 mm Sheet thickness: 5 mm Top roll diameter: 170 mm Technical data: - Motorized rear roll drive - Cone bending device - Hardened and polished rollers Fjdpfx Anod Ab Nns Hspn - Entire body made of St 52 steel - Asymmetrical design for perfect bending - Top and bottom rolls driven by brake electric motors and planetary gearboxes - Portable control panel - In compliance with CE standards Options: - Bottom roll driven by electric motor EUR 1,650 - Digital display for rear roll position indication EUR 1,010 - Extended rolls EUR 966 - Profile rolls EUR 1,190 We have numerous references!

Būklė: naujas, Bending length: 1600 mm Sheet thickness: 6 mm Upper roller diameter: 140 mm Technical specifications: - Rear roller driven by motor - Conical bending device - Hardened and polished rollers - Entire body made of ST 52 steel - Asymmetric design for perfect bending - Upper and lower rollers powered by brake electric motors and planetary gearbox integrated in the transmission - Portable control panel - In compliance with CE standards Fpodsd Ab Ntepfx An Hjn Options: - Lower roller driven by electric motor EURO 1,512,-- - Digital display for rear roller position EURO 1,010,-- - Extended rollers EURO 966,-- - Profile rollers EURO 1,190,-- We have numerous references!

Gamybos metai: 2016, būklė: naudotas, KK PULLTESTER KKP03A / Series 6 Year of manufacture: 2016 The KK Pulltester is a measuring device for quality assurance in the graphic arts industry. It measures with the highest precision the adhesion strength of individual pages in catalogues, paperbacks, magazines, brochures, and books. The number of pages to be measured, page numbers, job number, and book block length are programmed before the measurements are carried out. Technical specifications: Language: German Book block width: approx. 5 - 35 cm Fsdewcd Iqopfx An Hspn Book block length: approx. 7 - 40 cm Book block thickness: approx. 7 cm

Būklė: geras (naudotas), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, Parduodamas „Seydelmann Konti-Kutter KK 140 AC-6“, kuris šiuo metu yra adresu 45891 Gelzenkirchenas. Šis įrenginys pagamintas 2023 m., yra naudotas ir buvo naudojamas komercinėje veikloje. Šiuo metu įrenginys yra prijungtas prie elektros ir, susitarus dėl laiko, jį galima apžiūrėti. Fpodpfx Ajz Iznten Hon Jei jus domina įsigyti, mielai atsiųsime technines specifikacijas. Demontavimo ir pakrovimo išlaidas apmoka pirkėjas.

Būklė: naujas, Bending length: 2050 mm Sheet thickness: 4 mm Top roll diameter: 130 mm Technical specifications: - Rear roll powered by electric motor - Conical bending device - Hardened and polished rolls - Entire frame made from St 52 steel - Main motor equipped with a brake system - Top and bottom rolls driven by electric motor, gearbox, and gear system - Portable control panel Fpjdpfxed Ab Nwj An Hen - Cast iron frame - Manual adjustment of rear and lower rolls - In compliance with CE standards Options: - Top roll driven by electric motor: EUR 1,260 - Digital display indicating rear roll position: EUR 1,010 - Hardened rolls: EUR 1,352 - Special voltage: EUR 480 - Material feed table - Bottom roll driven by electric motor We have numerous references!

Būklė: naujas, Bending length: 2100 mm Sheet thickness: 8 mm Top roll diameter: 200 mm Technical specifications: Fsdpfxsd Ab Nhe An Hjpn - Rear roll motorized - Cone bending device - Hardened and polished rolls - Entire frame made of St 52 steel - Asymmetric design for perfect bending - Top and bottom rolls driven by brake electric motors and planetary gears in the gearbox - Portable control panel - Compliant with CE standards Options: - Bottom roll driven by electric motor EURO 2,200 - Digital display for rear roll position EURO 1,010 - Extended rolls EURO 966 - Profile rolls EURO 1,190 We have numerous references!

Būklė: naujas, Lankstymo ilgis: 1600 mm, Lakšto storis: 8 mm, Viršutinio volo skersmuo: 170 mm Techniniai duomenys: - Atgalinis volas varomas varikliu - Kūginio lankstymo įtaisas - Grūdinti ir poliruoti volai - Visa konstrukcija pagaminta iš St 52 plieno - Asimetrinis dizainas tobulam lankstymui - Viršutinis ir apatinis volai varomi stabdžiu elektros varikliais ir planetiniais pavarų dėžės reduktoriais - Nešiojamas valdymo pultas - Atitinka CE standartus Fsdpsd Ab Nqjfx An Hspn Parinktys: - Apatinis volas varomas elektros varikliu: 1 650 EUR - Skaitmeninis displėjus atgalinio volo padėties rodymui: 1 010 EUR - Pratęsti volai: 966 EUR - Profilių volai: 1 190 EUR Turime labai daug rekomendacijų!

Būklė: naujas, Bending length: 2100 mm Sheet thickness: 6 mm Top roller diameter: 170 mm Technical specifications: - Rear roller driven by motor - Cone bending device - Hardened and polished rollers - Entire frame made of St 52 steel - Asymmetric design for perfect bending - Top and bottom rollers powered by brake electric motors and planetary gearbox - Portable control panel Fjdpfx Ansd Ab Npe Hopn - Complies with CE standards Options: - Bottom roller driven by electric motor: EURO 1,650 - Digital display for rear roller position: EURO 1,010 - Extended rollers: EURO 966 - Profile rollers: EURO 1,190 We have numerous references!

Būklė: naujas, Bending length: 1250 mm Sheet thickness: 5.5 mm Top roll diameter: 140 mm Technical specifications: - Rear roll motor-driven - Conical bending device - Hardened and polished rolls - Full frame constructed from St 52 steel - Main motor with brake system - Top and bottom rolls driven by electric motor, gearbox, and gear system Fpodped Ab Nvsfx An Hsn - Portable control panel - Cast iron frame - Manual adjustment of rear and bottom rolls - Conforms to CE standards Options: - Top roll driven by electric motor EUR 1,260 - Digital display for rear roll position EUR 1,010 - Hardened rolls EUR 1,489 - Special voltage EUR 480 - Material infeed table - Bottom roll driven by electric motor We have numerous references!

Būklė: naujas, Bending length: 2050 mm Sheet thickness: 4.5 mm Top roll diameter: 140 mm Technical data: - Rear roll driven by motor - Cone bending device - Hardened and polished rolls - The entire frame is made of St 52 steel - Main motor with brake system - Top and bottom rolls driven by electric motor, gear and gearbox system - Portable control panel - Cast iron frame - Rear and bottom roll movement manual - In compliance with CE standards Options: - Top roll driven by electric motor EURO 1,260 - Digital display for rear roll position EURO 1,010 - Hardened rolls EURO 1,489 - Special voltage EURO 480 - Material feed table - Bottom roll driven by electric motor We have numerous references! Fpsdpjd Ab Nujfx An Hon

Būklė: naujas, Bending length: 3100 mm Sheet thickness: 6 mm Top roller diameter: 200 mm Fsdjd Ab Nfjpfx An Hopn Technical specifications: - Rear roller driven by motor - Cone bending device - Hardened and polished rollers - Entire body made of St 52 steel - Asymmetric design for perfect bending results - Top and bottom rollers driven by brake electric motors and planetary gearboxes - Portable control console - In compliance with CE standards Options: - Bottom roller driven by electric motor: EUR 2,200 - Digital display for rear roller position: EUR 1,010 - Extended rollers: EUR 966 - Profile rollers: EUR 1,190 We have numerous references!

Būklė: naujas, Bending length: 1250 mm Sheet thickness: 4 mm Upper roll diameter: 110 mm Technical specifications: - Rear roll driven by motor - Cone bending device - Hardened and polished rolls Fpsdpfx Aod Ab N Esn Hjn - Entire frame made of St 52 steel - Main motor with brake system - Upper and lower rolls driven by electric motor, gearbox, and gear system - Portable control panel - Cast iron frame - Manual adjustment of the rear and lower rolls - In compliance with CE standards Options: - Upper roll driven by electric motor: EUR 1,166 - Digital display for rear roll position: EUR 1,010 - Hardened rolls: EUR 827 - Special voltage: EUR 480 - Sheet feeding table - Lower roll driven by electric motor We have numerous references!

Būklė: naujas, Bending length: 3100 mm Sheet thickness: 5 mm Top roller diameter: 190 mm Technical specifications: - Rear roller motor-driven - Conical bending device - Hardened and polished rollers - Entire frame made of St 52 steel - Asymmetric design for perfect bending results - Top and bottom rollers powered by brake electric motors and planetary gears in the gearbox - Mobile control panel - In compliance with CE standards Options: - Bottom roller driven by electric motor: EUR 1,925 Fedpfxed Ab Nis An Hepn - Digital display for rear roller position: EUR 1,010 - Extended rollers: EUR 966 - Profile rollers: EUR 1,190 We have numerous references!

Būklė: naujas, Bending length: 2100 mm Sheet thickness: 7 mm Top roller diameter: 190 mm Technical specifications: - Rear roller motor-driven - Cone bending device - Hardened and polished rollers - Entire frame made of St 52 steel - Asymmetric design for perfect bending - Top and bottom rollers powered by brake electric motors and planetary gearboxes - Portable control panel - In accordance with CE standards Options: - Bottom roller driven by electric motor EURO 1,925 Fpjdpfx Anod Ab Nls Hsn - Digital display for rear roller position EURO 1,010 - Extended rollers EURO 966 - Profile rollers EURO 1,190 We have numerous references!

Būklė: naujas, Sheet width: 2100 mm Top roller diameter: 140 mm Sheet thickness: 4 mm Lower roller diameter: 140 mm Length: 4000 mm Height: 1040 mm Width: 1140 mm Weight approx.: 2240 kg Technical data: - Hardened and polished rollers - Full body made from ST-52 steel - The 4 rollers are arranged symmetrically - Hydraulically driven cover for easy material removal - Digital display for lower and side roller positions - Hydraulic adjustment - Top and bottom rollers driven by hydraulic system and gearbox - Vertical movement of the lower roller is hydraulically powered - Movable control panel - In compliance with CE standards Options: Central support: – €6,479 Side supports: – €4,055 CNC: – €8,670 Material feed table: – €3,258 Speed control (variable): – €4,109 Automatic material discharge Fpedjwhtdfspfx An Hon PLC control CNC control Automatic material loading system Interchangeable top roller Adjustable lower roller support system (customizable upon request) We have numerous references!

Būklė: naujas, Pressure: 63Bending length: 2500 mmColumn gap: 1980 mmMotor: 11 kWRam stroke - max.: 150 mmOpening width: 400 mmCNC press brake KK Industries 63x2500, 4 axes Y1-Y2-Y-X-R with CNC crowning Technical Specifications: Press Force: 63 t Bending Length: 2500 mm Distance between columns: 1980 mm Throat Depth: 300 mm Ram Stroke Length: 150 mm Maximum Opening: 400 mm Ram Down Speed: 180 mm/s Ram Return Speed: 170 mm/s Ram Working Speed: 14 mm/s Main Motor Power: 11 kW CNC Control: ZY68 Number of Control Axes: 4+1 Oil Tank Capacity: 150 L Backgauge (X-Axis): X-Axis Travel: 600 mm X-Axis Speed: 200 mm/s Positioning Accuracy: ±0.10 mm Repeatability: ±0.015 mm Motor Power: 0.85 kW R-Axis: R-Axis Travel: 150 mm R-Axis Speed: 100 mm/s Positioning Accuracy: ±0.10 mm Repeatability: ±0.015 mm Fjdpfx Asv Trgqjn Hspn Dimensions and Weight: Length: 2750 mm Width: 1350 mm Height: 2320 mm Weight: 4000 kg

Būklė: naujas, Pressure: 125 tn Bending length: 3200 mm Frame gap: 2655 mm Motor: 11 kW Maximum ram stroke: 200 mm Machine model: KK Industries 125x3200, 4 axes Y1-Y2-X-R & with CNC crowning system Nominal force: 125 tons Bending length: 3200 mm Distance between uprights: 2655 mm Throat depth: 400 mm Ram stroke: 200 mm Maximum opening: 455 mm Ram approach speed: 180 mm/s Fsdpfxowacqxs An Hopn Ram return speed: 160 mm/s Ram working speed: 13 mm/s Main motor power: 11 kW CNC system: ZY68 Number of controlled axes: 4+1 Oil tank capacity: 300 L Backgauge travel (X-axis): 600 mm X-axis speed: 200 mm/s Positioning accuracy: ±0.10 mm Repeatability: ±0.015 mm Motor power: 0.85 kW Backgauge R axis R-axis travel: 150 mm R-axis speed: 100 mm/s Positioning accuracy: ±0.10 mm Repeatability: ±0.015 mm Dimensions: Length: 3450 mm Width: 1580 mm Height: 2550 mm Weight: 7100 kg Delem T53 controller (additional charge €5,000)

Būklė: geras (naudotas), Gamybos metai: 1996, veikimo valandos: 62 590 h, sraigtinio konvejerio skersmuo: 50 mm, sraigtinio konvejerio ilgis: 1 300 mm, Gamintojas: KRAUSS-MAFFEI KMD-2-50-KK Fedpfxeh Nmt Dj An Hspn Dvigubo sraigto ekstruderis Aprašymas: naudotas, veikiantis Tipas: KMD-2-50-KK Gamybos našumas: maks. apie 140–180 kg/val., naudojant H-PVC vamzdžius; priklausomai nuo medžiagos ir produkto, šis našumas gali skirtis. Pagaminimo metai: 1996 m. Sraigto skersmuo: 50–103 mm (kūginis) Sraigto ilgis: 1300 mm Sraigto sukimosi greitis: maks. 43 m/min. Variklis: nuolatinės srovės variklis, 25 kW Cilindro šildymo/aušinimo zonos: 4/3 (alyvos aušinimas) Įleidimo angos šildymo zona: 1 Įrangos šildymo zonos: 5 Įranga: dozuojamasis įrenginys su talpykla, vakuuminis siurblys cilindro dujų pašalinimui, cilindro aušinimo įrenginys, sraigto temperatūros reguliavimas Pavara: pavara, sumontuota, kai prietaisas buvo naudojamas 53 000 valandų. Atnaujintos sraigtas ir cilindras. Pastaba: dabartinis naudojimo laikas yra 62 590 valandų.

Būklė: naujas, Sheet length: 2560 mm Sheet thickness: 4 mm Dimensions (LxWxH): 3200 x 2250 x 1400 mm Motor: 7.5 kW Weight approx.: 3500 kg Fpsdsgickvspfx An Hen Standard accessories: - NC control - Programmable, motorized backgauge with 750 mm stroke - Shadow line illumination - 1 piece stop rail with measuring scale - 2 sheet support arms - 1 sheet support arm (for models 1106, 1306, 1505) - Finger guard - Ball roller table - Simple blade gap adjustment from the front - Ball screw spindle - Stroke counter - Portable foot pedal with emergency stop button - Light barrier on the rear safety guards

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, stalo plotis: 1 200 mm, stalo ilgis: 2 500 mm, bendras ilgis: 3 000 mm, bendras plotis: 2 100 mm, bendras aukštis: 2 600 mm, bendras svoris: 700 kg, MEDŽIŲ GLUJDIMO PRESAS, sukantis, 3 sekcijos | STROMAB ST 2500 | JBS MASZYNY | medienai! Patvarus, sukamasis presas, skirtas klijuoti stalviršius! Klijavimo ilgis – 250 cm. Sukamasis presas STROMAB ST 2500. Fodpfxezxyfbo An Hopn TECHNINĖS CHARAKTERISTIKOS: - Darbinis ilgis: 25 000 mm - Darbinis plotis: 1200 mm - Pneumatiniai prispaudėjai - 3 klijavimo sekcijos - 6 pneumatiniai prispaudėjai kiekvienai sekcijai - 3 šoniniai prispaudėjai kiekvienai sekcijai Mašinos matmenys: - ilgis 300 cm - plotis 210 cm - aukštis 260 cm - svoris 700 kg ORGANIZUOJAME PERVEŽIMĄ KUR GALITE APŽIŪRĖTI MŪSŲ MAŠINAS? JBS MEDIENOS APDIRBIMO STAKLIAI WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Būklė: naujas, Dimensions (LxWxH): 1520 x 950 x 1780 mm Approx. weight: 1,440 kg Total power requirement: 4 kW Fpodpfxjd Ab Hye An Hsn Square steel: 35 mm Round steel: 40 mm Punching force: 60 t Throat depth: 220 mm Flat bar shear: 200 x 20 mm or 300 x 15 mm Notching (thickness x width x depth): 10 x 42 x 100 mm Punching - Round: 28 x 15 mm or 38 x 11 mm or 110 x 3 mm Angle iron cutting 90° or 45°: 120 x 120 x 12 mm or 80 x 8 mm - Single-cylinder design - 5 workstations: punch, notching station, flat, rod and angle steel shearing stations. Including: - Technical documentation - Hydraulic and electrical components from renowned manufacturers - Foot pedal - Switch for setup and working operation - Support table at the notching and flat steel station with stops - Support table at the punching station with stops - CE version PROPERTY DESCRIPTION / VALUE Punching force: 60 t Throat depth: 220 mm Stroke: 55 mm Strokes per min. (at 20 mm stroke): 25 Sheet thickness (max.): Ø 28 x 15 mm Working height: 955 mm Flat bar shear cutting capacity: 300 x 15 mm, 200 x 20 mm Angle steel 45° (one leg): 80 x 80 x 8 mm Angle steel 90°: 120 x 120 x 12 mm Blade length: 317 mm Round: 40 mm Square: 35 mm Material thickness: 10 mm Width: 1,520 mm Depth: 950 mm Motor power: 4.0 kW Mains voltage: 400 V, 50 Hz Height: 1,780 mm Weight: 1,440 kg