Hidralmac Formavimo Presas pirkti naudotą (8 404)

Būklė: naudotas, Gamybos metai: 2016, mašinos/transporto priemonės numeris: 4303, spaudimo jėga: 500 t, Hidralmac Four-Column Hydraulic Press – 500 t – 2,100 × 1,500 mm – Stroke 1,000 mm For sale is a four-column hydraulic press manufactured by Hidralmac, offering a press force of 500 t. This machine is engineered for demanding forming processes in continuous industrial operation and, thanks to its multi-cylinder technology, high dynamics, as well as extensive control and monitoring features, provides a precise and high-performance solution for complex applications. ==== Technical Specifications + Information: Hydraulic Four-Column Press – 500 t ==== General Information - Manufacturer: Hidralmac - Model: Four-Column Press - Design: Hydraulic Column Press - Machine Type: Forming Press - Press Force: 500 t (max. 550 t with reserve) - Machine Weight: approx. 39 t - Dimensions (L × W × H): 5,100 × 2,800 × 4,040 mm ==== Working Area - Clearance (W × D): 2,100 × 1,500 mm - Installation Height: 1,500 mm - Stroke: 1,000 mm - Table Height above Floor: approx. 850 mm ==== Table & Ram - Table Size: 2,100 × 1,500 mm (with T-slots) - Ram Size: 2,100 × 1,500 mm - Overall Table Plate Size: approx. 2,750 × 1,600 mm - Overall Ram Plate Size: approx. 2,750 × 1,600 mm ==== Speeds - Approach Speed: 300 mm/s - Return Speed: 300 mm/s - Pressing Speed: - 200 t: 28 mm/s - 300 t: 20 mm/s - 500 t: 6 mm/s ==== Hydraulics & Drive - Total Power Requirement: 62 kW - Return Force: 40 t - Main Cylinders: 2 units - Auxiliary Cylinders: 2 units - Axial Piston Pump: Bosch Rexroth A4VSO125 (ca. 290 l/min) - Hydraulic Block: Rexroth - Oil Tank Capacity: approx. 2,000 l - Pressure Regulation via PLC (min. 50 t) - Pressure Holding Time: 0–900 sec - Energy-saving via automatic pump shut-off when tool closed ==== Ejectors & Additional Systems - Ejector: 4 × 15 t at 250 bar - Ejector Stroke: 300 mm (PLC-adjustable) - Ejector Speed: - Forward: 95 mm/s - Return: 240 mm/s ==== Control & Electrical - Control: Siemens S7-300 - Monitor control with pressure and stroke programming - Storage capacity: up to 200 programs - Electronics: Siemens / Möller - Control panel on swivel arm - Voltage: 400 V / 50 Hz - Control voltage: 24 V ==== Safety & Monitoring - Light sensors by SICK (1,500 mm, front) - Monitoring of hydraulics, pumps, and temperature - Main cylinder synchronisation monitoring with automatic adjustment - Pressure monitoring with automatic return or hold function (± 5%) ==== Construction & Equipment - Main Cylinder Column Diameter: 360 mm - Auxiliary Cylinder Column Diameter: 120 mm - Material: ASTM A36, manufactured according to DIN 8651 - Polycarbonate safety glazing (8 mm) in working area and doors - Liquid channel around the table (25 mm radius) Godpfxedyynvo An Hebu ==== Additional System - Nitrogen compression unit (up to 280 bar, switchable) ===== Forming technology, heavy forming, series production, large part machining, industrial manufacturing Hydraulic press, four-column press, column press, forming press, industrial press, production press.

Būklė: geras (naudotas), TYMC-800 Honeycomb Şablonlu Sıcak Yaldız Baskı Makinesi En son sürüm, kilitler için petek plakalı. Makine sıcak yaldız baskı, sıcak baskı ve standart gofraj kalıbı kesimi için tasarlanmıştır; sıcak plakayı çıkarmadan çalışılabilir. Makine tamamen yenidir ve garanti kapsamındadır. Format: Gofraj kesimi: 830x590 mm Yaldız baskı (altın kaplama): 800x540 mm Ağırlık: 3000 kg Çalışma hızı: 25 çevrim/dakika Yaldız folyo ilerleme: 1-500 mm Çalışma sıcaklığı: 20-150°C Güç kaynağı: 380V Donanım: - Elektromanyetik kavrama ve fren - Hızlı montaj çerçevesi - Dokunmatik ekranlı kontrol paneli ve PLC programlayıcı - Step motorlarla kontrol edilen çift bağımsız besleme - 3 çalışma modu: sürekli, gecikmeli, manuel Godpfx Ansz E A Nms Hsbu - Dört bağımsız ısıtma sistemi ile enerji tasarrufu - Merkezi yağlama - Ek güvenlik muhafazaları - Fotosel sensörler - Kullanım araçları ve talimatları, CE deklarasyonu - Baskı plakası Makine hemen teslim edilebilir. Kurulum ve eğitim sunulmaktadır (fiyatlandırma bireysel olarak yapılır). 12 ay garanti. Makine tamamen yenidir. Makinelerimiz, Polonya'da çalıştırılması için gereken tüm standartları karşılayan birkaç üründen biridir. Radom’daki showroomumuzda test edilebilir.

Būklė: paruoštas naudoti (naudotas), Manufacturer: HSM Model: VL 155.2 Dimensions (W x D x H): 1450 x 926 x 2400 mm Pressing force: 16 t Filling opening: 1100 x 590 mm Filling chamber dimensions: 1100 x 700 x 1130 mm Bale size: 1100 x 700 x 950 mm Gbodpev Ai Tgjfx An Heu Bale weight: 110 - 200 kg Connection: 400 V / 50 Hz Drive power: 4 kW Rated current: 8.5A Tying: 4-way vertical Throughput: 4 - 8 bales/h Machine weight: 940 kg Year of manufacture: 2001-2005

Būklė: paruoštas naudoti (naudotas), Siūloma Italpresse gamyklos šildomųjų plokščių presas su apatine stūmoklio konfigūracija. Spaudimo jėga: 660 t, preso plokščių matmenys X/Y: 1900 mm/1600 mm, šildymo galia: 31 kW, prijungimo galia: 108 kW, greitojo eigos cilindro skersmuo: 70 mm, svoris: apie 28 000 kg. Yra dokumentacija. Galima apžiūrėti vietoje. Gbodpeyxgrdefx An Hsu

Būklė: naudotas, Knygų surišimo presas / Knygų formavimo presas Kolbus FE Gsdpfx Aezz A Rxen Hebu Vaizdo įrašų apžiūra internetu per „WhatsApp“, „MS Zoom“, „Telegram“ Sandėlyje, Emskirchene / Niurnberge – galima įsigyti iš karto – galima išbandyti.

Gamybos metai: 2012, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, valdiklio modelis: Simatic Mobile Panel 277 10", cilindrų skaičius: 4, kėlimo aukštis: 1 500 mm, spaudimo jėga: 250 t, darbinis slėgis: 245 juosta, pagrindinis kėlimo greitis: 290 mm/min, presavimo greitis: 400 mm/s, valdymo tipas: PLC valdomas, Įranga: 3-ioji hidraulinė funkcija, hidraulika, Čia turite unikalią galimybę įsigyti aukščiausios kokybės gamintojo FRIMO formavimo presą. Presas yra naudotas, bet labai geros būklės, jam nereikia atlikti jokių priežiūros darbų, ir jis yra iš karto prieinamas. Presą galima perkonstruoti ir pritaikyti naujiems uždaviniams, atsižvelgiant į klientų pageidavimus. Jei turite planų, susisiekite su mumis, ir mes parengsime jums individualų pasiūlymą. Šiuo metu presas yra Sontroje (Vokietija), ir jį galima apžiūrėti iš anksto susitarus. Presas šiuo metu išardytas (rėmas, hidraulika, priedai ir kt.), tačiau, jei reikia, jį galima visiškai surinkti. Gbjdpjztm Ufjfx An Hsu Presas paskutinį kartą buvo naudojamas daugialypėje gamybos linijoje, o likusi įranga taip pat daugiausia yra išsaugota. Nuotraukoje (bendroji schema) pateikta visa informacija, tačiau šiame skelbime pagrindinis dėmesys skiriamas 250 t formavimo presui. Jei jus sudomino šis pasiūlymas, galite susisiekti su mumis bet kuriuo metu.

Būklė: labai geros būklės (naudotas), Didelis hidraulinis presas, skirtas medienai ir kitoms medžiagoms formuoti, štampuoti ir presuoti. Viena darbo kamera (su 2 stalais, iš kurių apatinis yra judrus). Programuojamas loginis valdiklis (PLC) EC 609 tipas. Gjdpfxozyixae An Hjbu Naudingas darbo paviršiaus plotas: 1900 x 600 mm. Įrengti 4 vertikalūs hidrauliniai cilindrai. Bendras spaudimo pajėgumas: 800 tonų. Spaudimas iš apačios į viršų. Maksimalus presavimo plokščių atidarymo aukštis: apie 325 mm.

Būklė: naudotas, Single-column hydraulic press DUNKES Type HZT 2.5 Machine No. H94-2558 Year of manufacture: 1994 Press force: 2.5 tons Throat depth: 180 mm Table size: 420 x 300 mm Table opening: 60 x 185 mm Ram area: Ø 40 mm Clamping pin bore: Ø 20 mm Ram stroke: 160 mm Max. installation height: 250 mm Rapid downstroke: 65 mm/sec Rapid upstroke: 160 mm/sec Working speed: 8.3 mm/sec Table height above floor: 950 mm Hydraulic operating pressure: 135 bar Hydraulic tank capacity: approx. 100 liters Drive power: 1.5 kW Mains connection: 400 Volt, 50 Hz - Installation height can be increased by 80 mm by shortening the piston rod - Pressure and stroke shut-off - Two-hand operation at the machine - Stroke counter - Safe press control system with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for hand feeding operations) Godpoh Uhqyefx An Hobu - 32,047 observed operating hours - Electrical and hydraulic schematics available Space requirement (L x W x H): 1100 x 980 x 1950 mm Weight: 700 kg Very good condition.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1984, Rumunijos karšto formavimo linijos AMP 20, AMP 30, AMP 50 Spaudos galia: 220 tonos, 230 ir 400 Formavimo sekcija: 3, 3 ir 4 Formavimo apkrova: 900 kN, 2500 kN ir 8000 kN Strypo diametras: 14–28 mm, 18–40, 28–55 mm Gbodpetaui Uofx An Heu Detalės išorinis diametras, maks.: 35 mm Nukirpimo ilgis: 15–40, 20–72, 50–150 mm Stūmoklio eiga: 110 mm Išstūmėjo eiga: 55 mm Matricos centrų atstumas: 110 mm Gamyba per minutę: 12–180 Svoris: apie 11, 36 ir 90 tonų Techninė dokumentacija: yra Veikiančios įrangos vaizdo įrašas prieinamas

Būklė: geras (naudotas), Manufacturer: Ursviken Model: VPF 1000/800-5.0 Control: Siemens SIMATIC Panel Year of Manufacture: 1970 Hydraulic press suitable for the fabrication of large components such as dished heads, tanks, boilers, shipbuilding, and steel construction applications. Refurbished in 2015 with Siemens SIMATIC panel and Rittal E-Cabinet. Installed height: 2,950 mm Maximum die height: 1,500 mm Movable table and ram in X-direction Comprehensive die package with radii: 10/20/30/50/60/80/100 Pressing force: 210 kg/cm² Maximum stroke: 800 mm Machine pit depth: 2,350 mm Specifications Metric / US Standard Capacity: 1,000 tons Distance between uprights: 5,010 mm Table length: 3,000 mm Table width: 2,000 mm Table height: 550 mm Ram stroke: 1,450 mm Gbodskvmi Sepfx An Hju Approach speed: 50 mm/min Working speed: 5 mm/min Return speed: 50 mm/min Dimensions (Estimated) Length: 0 mm Width: 0 mm Height: 0 mm Weight: 0 kg Please Note: The information on this page has been compiled to the best of our knowledge and, where possible, sourced from the manufacturer. The details are provided in good faith, however, accuracy cannot be guaranteed. Accordingly, no assertions or contractual terms are implied. We recommend verifying all critical details independently.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2016, spaudimo jėga: 400 t, HIDRALMAC Four-Column Press – 400 t – 2,500 × 1,600 mm – Deep Drawing Press with Cushion For sale is a hydraulic four-column press (deep drawing press) from HIDRALMAC with a pressing force of up to 400 t. This machine is specifically designed for demanding deep drawing and forming processes, featuring a high-performance drawing cushion as well as state-of-the-art control and safety systems. Thanks to its robust construction and extensive equipment, it is ideally suited for industrial series production and complex forming tasks. ==== Technical Data & Information: Hydraulic Four-Column Press – Deep Drawing Press – 400 t ==== General Information - Manufacturer: HIDRALMAC - Model: Four-Column Press - Machine designation: Deep Drawing Press - Design: Four-Column Press - Pressing force: 50–400 t (adjustable) - Machine weight: approx. 27.5 t - Dimensions (L × W × H): approx. 3,950 × 2,200 × 4,850 mm - Main cylinders: 2 units ==== Working Area - Clearance width: 2,500 mm - Installation height: 1,300 mm - Stroke: 900 mm - Table height above floor: approx. 900 mm ==== Table & Ram - Table size: 2,500 × 1,600 mm - Ram size: 3,100 × 1,600 mm - Column diameter: 220 mm - Return force: 40 t - T-slots: DIN 650-22 (custom configurations possible) ==== Speeds - Approach speed: 200 mm/sec - Return speed: 200 mm/sec - Working speed: 5–15 mm/sec ==== Drawing Unit - Drawing cushion: 1,400 × 800 mm - Drawing cushion force: 30–60 t - Drawing cushion stroke: 250 mm - Drawing cushion speed: 5–80 mm/sec ==== Hydraulics & Power - Total power requirement: 62 kW - Oil tank: 1,500 l - Oil capacity: 1,200 l - Hydraulic components: Bosch Rexroth - Pressure buildup: up to 400 t within max. 4 seconds - Pressure control: adjustable via monitor ==== Control & Operation - Control: Siemens - Monitor: Siemens 12" - Operating modes: manual, semi-automatic, fully automatic - Travel distance control adjustable via monitor - Remote maintenance (remote access) - Two-hand operation on movable stand - Electrical control cabinet for wall mounting ==== Safety & Equipment - Safety PLC for hydraulic block monitoring Gbsdpfein Et Nsx An Heu - Front and rear light sensors: SICK (1,300 mm) - Side guards left and right (each 1,000 × 800 mm) - Interior LED lighting - Energy control system (idle consumption reduced to approx. 2 kW) ==== Construction - Robust welded construction - ASTM A36 structural steel - Induction-hardened and chrome-plated piston rods - Low-maintenance and reliable - CE certificate - Documentation in German ===== Deep drawing, forming technology, series production, sheet metal forming, tool making Hydraulic press, deep drawing press, four-column press, forming press, industrial press, production press Are you looking for a hydraulic press tailored to your application? Contact us for a customized quote. Our key strength lies in special purpose machinery construction and press automation. We offer custom-built hydraulic presses at surprisingly affordable prices. For the hydraulics of our presses, we predominantly use components from leading European manufacturers.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2022, mašinos/transporto priemonės numeris: DF0147, Straightening Press – Manufacturer Hidralmac – 150 t Profile Straightening Press – Servo Controlled For sale is a high-precision profile straightening press by Hidralmac with a pressing force of up to 150 t. The machine is equipped with two hydraulic cylinders, a servo-driven positioning unit, as well as a camera-assisted process monitoring system, making it ideal for the precise straightening of profiles and components with stringent quality requirements. ==== Technical Data & Information: Profile Straightening Press Hidralmac – 150 t Profile Straightening Press ==== General Information - Manufacturer: Hidralmac - Model: Straightening Press - Design: Double-cylinder profile straightening press - Pressing force: 15 – 150 t (continuously adjustable) - Machine weight: approx. 11.5 t - Required floor space: approx. 8,800 × 1,800 × 2,200 mm ==== Working Area - Cylinder diameter: Ø 100 mm ==== Hydraulics & Drive - Total power requirement: 20 kW - Servo motor: 2 kW - Cooling unit: 1 kW - Oil tank capacity: 350 l - Electric oil cooling: max. 1 kW ==== Speeds - Pressing speed: 0 – 9.9 mm/s (continuously adjustable via joystick) - Traverse speed of clamping plate: up to 100 mm/s ==== Control & Operation - Joystick control - Monitor display with ideal curve and measuring scale - Camera system for visual monitoring of the straightening process - Program management for various profiles ==== Table & Clamping System - Movable clamping plate on linear guides - Chain and servo motor drive - Quick-adjust mounting and clamping system Gbedpfxefxygws An Hju - Exchangeable straightening inserts (10 included) - Standard equipment for one profile included in delivery ==== Process Description - Positioning of the profile via clamping system - Visualization of deviation via camera system - Manual adjustment via joystick - Continuous monitoring during the process ==== Operating Conditions - Ambient temperature: 5 – 60 °C - Air humidity: up to 90% at 20 °C / 50% at 40 °C - Installation height: up to 1,000 m above sea level - Power supply fluctuation: ± 10 % ==== Profile straightening, straightening work, metal processing, maintenance, series production, quality correction, component processing Straightening press, profile straightening press, hydraulic press, servo straightening press, double cylinder press, industrial press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized quote. Our hydraulic presses are manufactured according to German machinery directives as well as European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety standard NR 12, which builds upon them. Our main strengths are custom machine construction and press automation. We offer custom-built hydraulic presses at surprisingly affordable prices. For the hydraulic systems, we mainly use components from leading European manufacturers.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2017, mašinos/transporto priemonės numeris: DF0052, spaudimo jėga: 200 t, HIDRALMAC Double-Column Press – 200 t – 1,200 × 1,000 mm – Deep Drawing Press For sale: A hydraulic double-column press (deep drawing press) manufactured by HIDRALMAC with a pressing force of 200 t. This machine is built for demanding deep drawing and forming operations, offering optimal conditions for industrial series production thanks to advanced control technology, high process speeds, and precise pressure regulation. ==== Technical Data & Information: Hydraulic Double-Column Press – Deep Drawing Press – 200 t ==== General Specifications - Manufacturer: HIDRALMAC - Model: Double-Column Press - Machine designation: Deep Drawing Press - Design: Double-column press - Pressing force: 200 t - Machine weight: approx. 20.5 t - Space requirement (L × W × H): approx. 4,000 × 2,600 × 5,000 mm - Main cylinder: 1 unit ==== Working Area - Distance between columns: 1,200 × 1,000 mm - Installation height: 800 mm - Working height: 1,100 mm - Stroke: 600 mm ==== Table & Slide - Table size: 1,200 × 1,000 mm - Slide plate: 1,200 × 1,000 mm - T-slots: according to DIN 650-22 (custom sizes available) - Return force: 20 t ==== Speeds - Rapid advance: 170 mm/sec - Return speed: 150 mm/sec - Working speed: 15 mm/sec - Setup mode: 2–10 mm/sec ==== Hydraulics & Power - Total power requirement: 32.5 kW - Axial piston pump: Bosch Rexroth - Hydraulic block: Rexroth - Oil requirement: approx. 500 l - Oil cooling: electric - Pressure regulation: via PLC (from 20 t) - Pressure holding time: 0–10 sec ==== Control & Operation - Control system: PLC - Voltage: 400 V / 50 Hz - Control voltage: 24 V - Pressure adjustment: 20–200 t via monitor - Program storage: up to 200 programs - Operation: movable two-hand control - Cabinet socket: 220 V ==== Applications & Features - Precise control for deep drawing operations - High repeat accuracy - Suitable for series production and toolmaking ===== Deep drawing, forming, series production, sheet metal working, toolmaking Hydraulic press, double-column press, deep drawing press, forming press, industrial press Gbodjfxyirspfx An Hou Looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured in compliance with German machinery directives and European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Our presses also exceed Canadian and European safety requirements, as they comply fully with Brazilian national safety regulations NR 12, which are based on these standards. Our core strengths are in special machine construction and press automation. We supply custom-built hydraulic presses at surprisingly competitive prices. Hydraulic components are predominantly sourced from leading European manufacturers.

Būklė: naudotas, Techninė informacija: Kotelio ilgis: maks. 30 mm Našumas: 600 vnt./min Didžiausias vielos skersmuo: 5 mm Darbinė sritis: 30 mm Valdymo spintos matmenys (IxPxA): 1,45x0,55x2,1 m Mašinos matmenys: 2,95x1,5x2,15 m Ritės matmenys: 1,15x1,15x1,15 m Mechaninė šaltai formuojanti presas Skirta kniedėms, grandinių kaiščiams, varžtams ar specialiems gaminiams gaminti. (GAMINTOJO TEIGIMU, BE VARŽTŲ) Įranga yra specialiai pagaminta ir nenaudota (beveik nauja). Gjdpfx Anou Nfrcs Hebu Priedai: - Ritė - Naudojimo instrukcija Galima demonstracija. i.D.

Būklė: naudotas, Gamybos metai: 2017, spaudimo jėga: 500 t, Hidralmac Four-Column Press – 500 t – 1,900 × 800 mm – Stroke 600 mm For sale is a hydraulic four-column press from manufacturer Hidralmac with a pressing force of 500 t. This machine is designed for demanding continuous production processes and stands out due to its high stability, precise control, and extensive monitoring and adjustment options. With its robust construction and powerful hydraulics, it is ideal for forming, pressing, and series production applications. ==== Technical Data & Information: Hydraulic Four-Column Press – 500 t ==== General Details - Manufacturer: Hidralmac - Model: Four-Column Press - Design: Hydraulic column press - Machine type: Production press - Pressing force: 500 t - Machine weight: approx. 18 t - Dimensions (L × W × H): approx. 2,400 × 2,400 × 5,500 mm - Operation: Two-hand control ==== Working Area - Pass-through width: 1,300 × 800 mm - Working height: 700 mm - Stroke: 600 mm - Table height above floor: approx. 1,000 mm ==== Table & Ram - Table size: 1,900 × 800 mm - Ram size: 1,300 × 800 mm - Column diameter: 200 mm ==== Speeds - Approach speed: 150 mm/s - Working speed: 5–10 mm/s - Return speed: 150 mm/s ==== Hydraulics & Drive - Motor power: 50 kW - Return force: 50 t - Number of cylinders: 1 - Oil tank volume: 1,500 l - Oil quantity: approx. 1,400 l - Oil cooling: electric ==== Control & Functions - Position measurement via linear encoder - Adjustable parameters: pressure, speed, travel distance, holding positions - Switching point from rapid approach to pressing speed freely definable - Pressure monitoring with automatic return or pressure holding function - Pressure holding with approx. 5% tolerance - Automatic monitoring of hydraulics, pumps, and temperature - Synchronization monitoring and automatic compensation in case of load deviation - Operator panel control for programming and operation - Control cabinet mounted on the machine ==== Construction & Features - Columns and cylinders made of tool steel, induction hardened and chrome-plated - Ram guide with bronze sliding bushings - Adjustable two-hand operation - Robust machine frame for continuous industrial use ==== Delivery Scope & Documentation - Manuals and operating instructions (two copies) - CE declaration - Safety inspection by authorized technician - 3D drawings for customer approval ===== Forming technology, series production, pressing processes, industrial production, heavy-duty applications Hydraulic press, Four-column press, Column press, Production press, Industrial press, Forming press Gbjdpfxed E Irmo An Hsu Looking for a hydraulic press tailored to your application? Contact us for a customized quotation. Our core competency is special-purpose machine engineering and press automation. We offer custom-built hydraulic presses at surprisingly attractive prices. For our press hydraulics, we mainly use components from leading European manufacturers.

Būklė: naudotas, Gamybos metai: 2021, mašinos/transporto priemonės numeris: A2536805, spaudimo jėga: 40 t, Hidralmac Single Column Hydraulic Press – 40 t Forging Press – Stroke 250 mm For sale is a hydraulic single column press (C-frame) from Hidralmac with a pressing force of 40 t. The machine is designed for forging, forming, and bending applications, and can be custom-built to customer specifications. Thanks to adjustable speeds, precise position control, and flexible operating modes, the press is suitable for both manual setup operations and fully automated processes. ==== Technical Data & Information: Hydraulic Single Column Press – 40 t ==== General Data - Manufacturer: Hidralmac - Model: Single Column Press / Forging Press - Design: C-frame press - Pressing force: 40 t - Lead time: approx. 3 months from receipt of payment ==== Working Area - Open height: 450 mm - Stroke / travel: 250 mm ==== Table & Ram - Table plate: 600 × 650 mm with T-slots - Ram plate: 500 × 200 mm - Table cut-out: 200 × 170 mm - Table height: 850 mm ==== Speeds - Approach speed: max. 90 mm/s - Pressing speed: 10 mm/s - Return speed: max. 90 mm/s - Setup mode: approx. 9.5 mm/s ==== Hydraulics & Drive - Motor power: 5.5 kW Gjdpfx Asfxyhfsn Hsbu - Oil tank: 200 l - Return force: 6.3 t ==== Control & Features - Positioning accuracy: ± 0.5 mm - Adjustable hold time: 0 – 10 s (in 0.1 s increments) - Pressing pressure adjustable via control system - Switch-over between manual and automatic mode via key switch - Two-hand operation for safety - Sensor-based position control (top dead center, bottom dead center, switching point) ==== Operating Modes - Manual setup mode with stop at any point - Bending mode via two-hand control - Automatic mode for closed-tool operations - Optional use for punching, notching, and bending ===== Forging operations, forming technology, bending processes, punching, notching, small batch production, tool making Single column press, C-frame press, forging press, hydraulic press, industrial press, bending press, tool tryout press, tryout press Looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured in accordance with German machinery directives as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the national Brazilian safety guideline NR 12, which builds upon these. Our main strengths are in custom machine building and press automation. We offer customized hydraulic presses at surprisingly affordable prices. The hydraulic systems of our presses are predominantly equipped with components from leading European manufacturers.

Būklė: naujas, Gamybos metai: 2017, mašinos/transporto priemonės numeris: DF0152, spaudimo jėga: 80 t, HIDRALMAC Four-Column Press – 80 t – 800 × 800 mm – Deep Drawing Press with Cushion For sale is a hydraulic four-column press (deep drawing press) from HIDRALMAC with a press force of 80 t. This machine is designed for drawing and forming processes and is equipped with an integrated deep-drawing cushion as well as modern control and safety technology. Thanks to its compact construction and robust components, it is ideally suited for small-batch production, toolmaking, and precise forming operations. ==== Technical Data & Information: Hydraulic Four-Column Press – Deep Drawing Press – 80 t ==== General Information - Manufacturer: HIDRALMAC - Model: Four-Column Press - Machine Type: Deep Drawing Press - Design: Four-Column Press - Press Force: 80 t - Machine Weight: approx. 5.1 t - Total Power Requirement: 12 kW - Operation: Two-hand operation - Main Cylinder: 1 piece ==== Working Area - Working Area: 800 × 800 mm Gbjdpfofxyh Hsx An Hsu - Table Size: 800 × 800 mm - Working Height: 800 mm - Table Height: 800 mm - Stroke: 500 mm - Travel Path: 700 mm ==== Table & Ram - Ram Plate: 2,800 × 1,300 mm - Column Diameter: 75 mm ==== Speeds - Approach Speed: 9.8 mm/sec - Working Speed: 9.8 mm/min - Return Speed: 18 mm/sec ==== Deep Drawing Unit - Deep Drawing Cushion Force: 25 t (at 280 bar) - Deep Drawing Cushion Stroke: 200 mm - Rod Diameter: 30 mm - Deep Drawing Cushion Speed: 80 mm/sec - Deep Drawing Function Motor: 10 kW ==== Hydraulics & Performance - Main Motor: WEG 15 kW - Pump: Rexroth / Parker axial piston pump - Hydraulic Block and Valves: Rexroth / Parker - Hydraulic Tank: 300 l (oil requirement approx. 250 l) - Auxiliary Oil Tank: 150 l - Hydraulic Pressure Control: via PLC (from 10 t) - Air Cooling with Electric Fan - Lubrication: manual via grease nipples or cartridges ==== Control & Operation - Control System: Siemens / Moeller - Modes of Operation: automatic, semi-automatic, manual (setup mode) - Control Panel on Swivel Arm - Movable Two-Hand Operation - USB Interface for Data Transfer - Remote Control (Siemens Remote Maintenance) - Spacer Sensors for Stroke Length Adjustment - Pressure Hold: 0–10 sec ==== Safety & Equipment - Light Curtains Front and Rear (Schmersal, 800 mm) - Additional Diagonal Safety in Lower Section - Hydraulic System Safety Monitoring ===== Drawing, Forming, Small Batch Production, Toolmaking, Sheet Metal Processing Hydraulic press, hydraulic press, deep drawing press, four-column press, deep drawing press, forming press, industrial press Looking for a hydraulic press tailored to your application? Contact us for an individual quotation. Our hydraulic presses are manufactured in accordance with German machinery guidelines and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses surpass Canadian and European safety requirements as they fully comply with the Brazilian national safety guideline NR 12, which builds upon these. Our major strength is special machine construction and press automation. We offer custom-made hydraulic presses at surprisingly affordable prices. The hydraulics of our presses are primarily equipped with components from leading European manufacturers.

Būklė: naujas, Gamybos metai: 2019, spaudimo jėga: 275 t, Portal Straightening Press – Manufacturer Hidralmac – 275 t Gantry Press – Table Size 6,000 × 3,000 mm For sale is a high-performance gantry straightening press from Hidralmac offering a pressing force of 275 t. The machine features a large table construction measuring 6,000 × 3,000 mm, a traversing bridge, and a laterally positionable cylinder, making it ideally suited for large-format straightening, assembly, and heavy-duty processing tasks. ==== Technical Data & Information: Gbjdpfxsfxyigs An Hju Portal Straightening Press Hidralmac – 275 t Gantry Press ==== General Details - Manufacturer: Hidralmac - Model: Portal Straightening Press - Design: Gantry Press - Pressing Force: 275 t - Machine Weight: approx. 40 t ==== Working Area - Distance between Uprights: 3,000 mm - Table Size: 6,000 × 3,000 mm - Table Height: approx. 700 mm - Max. Clearance Table – Ram: 1,100 mm - Stroke: 900 mm ==== Movements & Travel Paths - Bridge Travel (X/Y): 6,000 mm - Bridge Travel Speed: 30 – 33 mm/s - Maximum Lateral Cylinder Adjustment: 3,000 mm - Cylinder movement via servo motor and rack-and-pinion system ==== Speeds - Lowering Speed: 2 – 10 mm/s - Stroke Speed: 2 – 50 mm/s ==== Hydraulics - Total Power Requirement: 30 kW - Pump System: Axial pump with proportional valve - Oil Tank Capacity: 450 l - Return Force: 27 t ==== Cylinder - Cylinder Diameter: Ø 440 mm - Ram Extension: 200 mm / Ø ==== Control & Operation - Control System: Siemens S7-1200 - Display: Siemens 9" Touch Panel - Control Panel: Portable ===== Straightening work, large component processing, heavy-duty assembly, steel construction, mechanical engineering, maintenance, special applications Gantry press, straightening press, hydraulic press, industrial press, heavy-duty press, tryout press, tool try-out press Looking for a hydraulic press tailored to your application? Contact us for a customized quotation. Our hydraulic presses are built according to the German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Additionally, our presses exceed Canadian and European safety requirements as they are fully compliant with Brazil’s national safety standard NR 12, which builds upon these regulations. The hydraulics are predominantly equipped with components from leading European manufacturers.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2012 1140, bendras plotis: 1 700 mm, bendras aukštis: 1 500 mm, bendras ilgis: 1 200 mm, tuščias svoris: 500 kg, Įranga: dulkių šalinimas, Nėra minimalios kainos – garantuotas pardavimas už didžiausią pasiūlymą! Parduodamas mašinų komplektas, kuriame yra briketavimo presas ir dulkių surinkimo įrenginys! Godjz Eaw Uspfx An Hsbu MAŠINŲ TECHNINĖS CHARAKTERISTIKOS Transportavimo pakuotės: 1 vnt. Matmenys ir svoris Matmenys (ilgis x plotis x aukštis): 1200 x 1700 x 1500 mm Sausas svoris: 500 kg ĮRANGA Briketavimo presas Dulkių surinkimo įrenginys

Gamybos metai: 2020, būklė: beveik kaip naujas (naudotas), spaudimo jėga: 150 t, Hidralmac Salt Press – 150 t – Mineral Block Press – Stainless Steel Contact Surfaces For sale is a hydraulic mineral block or salt press from the manufacturer Hidralmac with a pressing force of 150 t. This machine is specifically designed for the production of salt and mineral blocks and features stainless steel contact surfaces to ensure hygienic and corrosion-resistant processes. With its robust construction and optional upgrades, it is suitable for continuous industrial operation. ===== Technical Data & Information: Hydraulic Salt Press – 150 t ==== General Data - Manufacturer: Hidralmac - Model: Mineral Block Press - Machine Designation: Salt Press Gbedpfxsdxvfis An Heu - Design: Hydraulic Production Press - Pressing Force: 150 t - Machine Weight: approx. 8.5 t - Dimensions (L × W × H): 1,200 × 1,800 × 3,100 mm - Motor Power: 10 kW - Steel Grade: Structural Steel LCG ASTM A36 ==== Work Area - Max. Working Height: 1,000 mm - Stroke: 500 mm - Table Height Above Floor: 1,000 mm ==== Speeds - Approach Speed: max. 9.9 mm/sec - Pressing Speed: up to 100 t: 9.9–0 mm/sec - Return Speed: 25 mm/sec ==== Hydraulics & Technology - Hydraulic Tank: 500 l - Oil Requirement: approx. 400 l - Column Diameter: 230 mm, chrome-plated - Lubrication: Manual via grease fittings ==== Construction & Features - All product-contacting components made of stainless steel - Heavy-duty design for salt and mineral processing - High resistance to corrosion - Maintenance-friendly construction ==== Options (on request) - Surrounding maintenance platform - Closed side panels (left/right/rear) - Light curtains at the front (increased speed) - Speed enhancement - Siemens S7-1200 control with 12" monitor - Pilz safety technology ===== Salt production, mineral block manufacturing, chemical industry, briquetted products, serial production Hydraulic press, salt press, mineral block press, production press, industrial press, pressing system Looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machine directives as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety guideline NR 12, which is based on these standards. Our main strength is in custom machinery construction and press automation. We supply customized hydraulic presses at surprisingly affordable prices. The hydraulics on our presses predominantly use components from leading European manufacturers.

Būklė: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: 4273, spaudimo jėga: 110 t, Tryout Press – Manufacturer Hidralmac – 110 t Spotting Press – Table 1,200 × 1,000 mm For sale is a high-performance spotting press from manufacturer Hidralmac with a pressing force of 110 t. The machine features a swiveling and traversing table, a large stroke of 1,150 mm, rapid approach speeds, and is particularly suitable for spotting, adjustment, and tryout work in tool and mold construction. ==== Technical Data & Information: Tryout Press Hidralmac – 110 t Spotting/ Try Out Press ==== General Information - Manufacturer: Hidralmac - Model: Spotting Press - Design: Try Out Press / Spotting Press Gedped Ap Ugjfx An Hebu - Pressing Force: 110 t - Machine Weight: approx. 16 t - Dimensions (L × W × H): 4,200 × 2,400 × 4,800 mm ==== Working Area - Stroke: max. 1,150 mm - Table Travel: 1,200 mm ==== Table System - Table Size: 1,200 × 1,000 mm - Swiveling Table: up to 45° - Max. Table Load: 12 t - Table Traverse Speed: 25 mm/s - Table Swivel Speed: 10 mm/s ==== Forces - Return Force: 11 t ==== Speeds - Working Speed: 0 – 10 mm/s (adjustable) - Return Speed: 130 mm/s - Rapid Traverse: 195 mm/s ==== Hydraulics - Drive Power: 23 kW - Oil Tank: 400 l - Recommended Oil: DIN HLP / ISO VG 46 ==== Electrical - Voltage: 400 V - Control Voltage: 24 V DC - Frequency: 50 Hz ==== Equipment / Finish - Colour Scheme: - Machine Body: RAL 7035 (Grey) - Moving Parts: RAL 2009 (Orange) - Other Components: RAL 7021 (Dark Grey) ===== Spotting operations, tool adjustment, tool tryout, mold making, tool making, tryout work, adjustment processes, large tools Spotting press, tryout press, tool spotting press, tool tryout press, hydraulic press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customised offer. Our hydraulic presses are manufactured in accordance with German machinery guidelines, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully conform to the national Brazilian safety standard NR 12, which is based on these standards. Our core strength is special machine construction and press automation. We supply customised hydraulic presses at surprisingly competitive prices. For the hydraulics of our presses, we primarily use components from leading European manufacturers.

Gamybos metai: 2020, būklė: dilaminuotas dirbtuvėje (naudotas), spaudimo jėga: 400 t, mašinos/transporto priemonės numeris: DF0317, Hidralmac Mineral Lick Press – 400 t – Salt Press – 600 mm Opening – with Conveyor Belt For sale is a hydraulic mineral lick press from Hidralmac with a pressing force of 400 t. This machine is specifically designed for the production of salt and mineral lick products and features an integrated conveyor belt for efficient material handling. Thanks to its robust construction and stainless steel components in all product-contact areas, the press is ideally suited for continuous industrial operation. ==== Technical Data & Details: Hydraulic Mineral Lick Press – 400 t ==== General Information - Manufacturer: Hidralmac - Model: Mineral Lick Press - Machine Designation: Salt Press Gbsdpfx Anjd E Irhe Hou - Design: Four-column press - Pressing force: 400 t - Machine weight: approx. 14 t - Dimensions (L × W × H): 2,380 × 1,680 × 3,580 mm - Motor power: 36 kW ==== Working Area - Opening width: 600 mm - Max. working height: 750 mm - Stroke: 400 mm - Travel: 500 mm ==== Table & Construction - Column diameter: 230 mm - Return force: 40 t - Steel grade: Machine engineering steel LCG ASTM A36 (DIN 8651) - Product-contact parts: Stainless steel ==== Speeds - Approach speed: max. 10 mm/sec - Pressing speed: 10 mm/sec - Rapid traverse: 25 mm/sec ==== Hydraulics & Ancillaries - Oil tank: 600 l - Oil cooling: 1.5 kW - Conveyor belt: 6 m length ==== Control System - Monitor: WEG, 12 inch ===== Salt block pressing, mineral lick production, pressing processes, industrial manufacturing Hydraulic press, hydraulic press, mineral lick press, salt press, production press, industrial press, forming press Looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German machinery directives as well as European machinery guidelines (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the national Brazilian safety standard NR 12, which builds upon these standards. Our core strength is special-purpose machine design and press automation. We supply custom-designed hydraulic presses at surprisingly competitive prices. For the hydraulics, we primarily use components from leading European manufacturers.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2016, spaudimo jėga: 40 t, Tryout Press – Manufacturer HIDRALMAC – 40 t Die Spotting Press – Table 1,000 × 700 mm Available for immediate sale is a hydraulic tryout press from HIDRALMAC with a pressing force of 40 tons. The machine features an extendable, tiltable, and rotatable table, an installation height of 1,200 mm, a modern monitor control unit, and is especially suited for spotting, adjustment, and tryout work in tool and mold making. ==== Technical Data & Information: Tryout Press HIDRALMAC – 40 t Die Spotting Press ==== General Information - Manufacturer: HIDRALMAC - Model: Tryout Press / Spotting Press - Design: Tryout Press / Spotting Press - Pressing force: 40 t - Machine weight: approx. 9 t - Space required: approx. 4,000 × 4,400 × 1,800 mm ==== Working Area - Installation height: 1,200 mm - Stroke: 1,050 mm ==== Table System - Table size: 1,000 × 700 mm - Table travel (extendable): 1,050 mm - Table tilt: up to 50° Gedpfxehtm E Ne An Hobu - Table rotation: 180° - Table travel speed: 25 mm/s - Max. table load: 5 t ==== Tool Reception - Upper tool fold-down: up to 180° - Ram plate hydraulically fold-down: up to approx. 175° ==== Hydraulics and Drive - Main cylinder: 1 unit - Hydraulics: Bosch Rexroth - Motors: WEG ==== Speeds - Forward speed: 100 mm/s - Return speed: 100 mm/s - Working speed: 0–10 mm/s (adjustable) ==== Control - Siemens control system with monitor (9") - 200 memory slots - USB interface - Remote maintenance capability - Adjustable: pressure, stroke, speed - Linear measurement system for position monitoring - Programmable stop and switching points ==== Safety - SICK light curtains (1,250 mm) - Complete monitoring of the work area ==== Equipment - Operator panel on swing arm - Two-hand operation on mobile stand - Interior lighting - Control cabinet positioned to the left of the machine - Maintenance balcony with marine ladder - Robust welded construction according to DIN 8651 - Columns and cylinders made from SAE 1045 (C45), induction hardened and chrome plated ==== Scope of Delivery - CE certificate - Operating manual and technical documentation (German) ===== Spotting, tool tuning, tool testing, mold making, tool making, tryout works, adjustment processes, tool handling Spotting press, tool tryout press, tryout press, tool adjustment press, tool try out press, tryout press, hydraulic press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured in accordance with German machinery directives as well as European Machinery Directive 2006/42/EC, EC standards, and EU safety regulations. Our presses also surpass both Canadian and European safety requirements, as they fully comply with the Brazilian national safety standard NR 12, which is based on these directives. Our core competence is in custom machine building and press automation. We offer bespoke hydraulic presses at surprisingly attractive prices. Our presses are primarily equipped with hydraulic components from leading European manufacturers.

Būklė: naudotas, Gamybos metai: 1998, Presavimo jėga: 3500 t Eiga: 900 mm Rėmo plotis: 3200 mm Šoninio rėmo atidarymas: 2200 mm Aukštis uždarytoje padėtyje (eigos viršutinėje padėtyje): 1700 mm Stalo plotas: 3150 x 2150 mm Stalo aukštis virš grindų: 500 mm Stūmoklio plotas: 3150 x 2400 mm Greitis žemyn: 400 mm/s Greitis aukštyn: 210 mm/s Gbjdpfx Anezypa Re Hju

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, spaudimo jėga: 15 t, Hidralmac C-Frame Press – 15 t – Assembly Press – Manual Combination Press For sale is a compact hydraulic C-frame combination press from Hidralmac with 15 t pressing force. The machine is a manual special-purpose solution, ideally suited for flexible assembly, straightening, and pressing tasks in workshop and service environments. The table plate can be swung out to the left. The lower base plate can be positioned at 3 different heights. Using the rotary crosshead, the press ram can be manually lowered. Special Features of this Press: The operator can apply very sensitive pressing force from 0 up to 1.5 T. This is particularly important when pressing in ball bearings. We have supplied this type of press several times to the aerospace industry, where precise and careful operations are essential. After exact positioning, the hand pump can then be used to build up pressure up to 15 T. ##### Technical Specifications & Information: Assembly/Disassembly Press – 15 T – 270 × 600 mm ==== General Features - Design: C-frame / Manual Hydraulic Press - Manufacturer: DURENDUS - Pressing force: 0–15 T - Table size: 270 × 600 mm Gjdpfx Anjfhcc Ie Hsbu - Installation height: 650 / 800 mm - Table height from floor: 750 mm - Hole in table: Ø 60 mm - Distance from bottom recess to table: 450 mm - Overall dimensions (W×D×H): 900 × 850 × 2,300 mm - Total weight: approx. 800 kg - Frame: welded steel construction - Table: swing-out - Lower table: height-adjustable (3 positions) ==== Hydraulic Cylinder - Ram stroke: 150 mm - Piston rod diameter: Ø 80 mm - Cylinder diameter: Ø 100 mm - Max. working pressure: 250 bar ==== Hydraulics & Drive - Drive: manual via lever and hand pump - Fine control: 0–1.5 T via rotary crosshead - Hand pump: 0.5 l - Pressure display: manometer ==== Controls - Operation: manual via lever and rotary crosshead - Pressure regulation: finely adjustable mechanical system ==== Safety - Anti-rotation device - Sturdy frame construction ##### Application Areas: Press-fitting, push-out operations, assembly, disassembly, straightening, bearing technology, workshop work, maintenance, precision assembly, service assignments, small batch production Hydraulic press, hydraulic assembly press, assembly press, disassembly press, workshop press, 15 T press, 15 ton press, manual hydraulic press, C-frame press, single-column press, C-press, hand press, pressing-in press, bearing press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for a customized quote. Our hydraulic presses are manufactured in accordance with the German Machinery Directive, the European Machinery Directive (Directive 2006/42/EC), as well as EC standards and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the national Brazilian NR 12 safety directive, which is based on these standards. Our core competence lies in custom machine building and press automation. We offer tailor-made hydraulic presses at surprisingly competitive prices. For the hydraulics, we primarily use components from leading European manufacturers.