Hebrock F 5 - Sofort Verfügbar - pirkti naudotą (78 675)

Būklė: naujas, Gamybos metai: 2026, „Hebrock F 5“ Jei jums reikia maksimalaus našumo, „Hebrock F 5“ yra idealus sprendimas briaunų apdirbimui, ypač reikliose meistro dirbtuvėse. „F 5“ užtikrina briaunų apdirbimą visais etapais, nes jame yra visi komponentai, kurių jums reikia, atsižvelgiant į jūsų poreikius: griovelio freza, atpjovimo staklės, frezavimo agregatas, apvalinimo peilis, kampų freza, plokštumos apdirbimo peilis, valymo stotis. Siekiant dar didesnės lankstumo, siekiant tobulų rezultatų, „F 5“ gali būti papildomai įrengtas praktišku kelių spindulių apdirbimo peiliu. Maksimalus briaunos storis: 3 mm Maksimalus apdirbamo gaminio storis: 50 mm Pasiruošimas darbui per 3,5 min. Įranga: Fpedpfxelht Hws Afqjl „Hebrock F5 Next“ – 10 m/min. Briaunų apdirbimo staklės „F5 Next“ Su PLC valdikliu (įskaitant jutiklinį ekraną) ir karšto klijų padavimo įtaisą, skirtą briaunų medžiagai iki 3 mm storio; griovelio freza (įskaitant deimantinį įrankį) iki 2 mm frezavimo gylio, nereikalaujanti priežiūros klijų talpa su galimybe keisti talpas, įskaitant klijų išleidimo įrenginį, aukšto dažnio atpjovimo stotis (apie 12 000 aps./min.), aukšto dažnio frezavimo stotis (apie 12 000 aps./min.) su atskiru pneumatiniu frezavimo reguliavimu ir keičiamų plokščių freza (kombinuotas variantas), kampų apvalinimo freza, apvalinimo peilis, plokštumos apdirbimo peilis (įskaitant pneumatinį pakėlimą), valymo stotis, tvirtas grandininis pavara, dvigubo volelio presas su rutuliniais guoliais, peržiūros langas iš staklių galinės pusės, ištraukiama gaminio atrama, padavimas apie 10 m/min. „Hebrock F5“ F5/08/4 – greito keitimo įtaisas kampų frezai F5/08/5 – papildomas keičiamas variklis kampų frezai su įrankių komplektu F5/09/4 – kelių spindulių apdirbimo peilis (R1/R2) F5/10 – važiuoklė F5/14 – papildoma keičiama talpa F5/24/1 – purškimo įrenginys, skirtas atskyrimo priemonėms F5/24/2 – purškimo įrenginys, skirtas valymo priemonėms F5/25 – purškimo įrenginys, skirtas briaunoms F5/27 – lizdas frezai ir apvalinimo peiliui F6/28 – purškimas, tekstūruotas paviršius F5/30 – pneumatinis 3 taškų reguliavimas (spindulio, fazės, lygaus frezavimo) F5/31 – sujungimas iki 50 mm F5/32 – LED apšvietimas Vieta: sandėlyje, 54634 Bitburgas – galima įsigyti iš karto –

Būklė: naujas, Gamybos metai: 2026, „Hebrock F 5“ Jei norite maksimalaus našumo, „Hebrock F 5“ yra idealus sprendimas kraštų apdirbimui reikliose amatininkų dirbtuvėse. „F 5“ garantuoja kraštų apdirbimą visuose etapuose, nes yra aprūpinta visomis dedamosiomis, kurių jums reikia, atsižvelgiant į jūsų poreikius: frezavimo įrankis, diskinis pjūklas, frezavimo agregatas, spindulys, kampinis frezavimo įrankis, plokščias spindulys, valymo stotis. Siekiant dar didesnio lankstumo, kad būtų pasiektas tobulas rezultatas, „F 5“ gali būti papildomai įrengta praktišku universaliu spinduliu. Maksimalus krašto storis: 3 mm Fpodpfji Anadox Afqel Maksimalus apdirbamo gaminio storis: 50 mm Paruošta darbui per 3,5 minutės Įranga: „Hebrock F5 Next“ – 10 m/min Kraštų apdirbimo staklės „F5 Next“ Su PLC valdikliu (įskaitant jutiklinį ekraną) ir karštojo klijų padavimo įtaisu apdirbamam gaminiui, skirtam krašto medžiagai, kurios storis iki 3 mm; frezavimo įrankis (įskaitant deimantinį įrankį), iki 2 mm frezavimo gylio, nereikalaujantis priežiūros klijų bakas su keičiamo bako įdėklu, įskaitant klijų išleidimo įtaisą, aukšto dažnio diskinio pjūklo stotis (apytiksliai 12 000 aps./min.), aukšto dažnio frezavimo stotis (apytiksliai 12 000 aps./min.) su atskiru pneumatiniu frezavimo įtaisu ir keičiamų plokščių freza (kombinuota versija), kampinio apvalinimo frezavimo įrankis, spindulys, plokščias spindulys (įskaitant pneumatinį pakėlimo mechanizmą), valymo stotis, tvirtas grandinis pavara, dviejų volelių viršutinis spaudimas su guoliais, permatomas langas iš staklių galinės dalies, ištraukiama atrama apdirbamam gaminiui, padavimas apie 10 m/min. „Hebrock F5“ F5/08/4 Greito keitimo įrankis kampiniam frezavimo įrankiui F5/08/5 papildomas keičiamas variklis kampiniam frezavimo įrankiui su komplektu F5/09/4 Universalus spindulys (R1/R2) F5/10 važiuoklė F5/14 papildomas keičiamas bakas F5/24/1 purškimo įtaisas atskiriamajam skysčiui F5/24/2 purškimo įtaisas valymo skysčiui F5/25 purškimo įtaisas kraštams F5/27 tvirtinimo įtaisas frezai ir spinduliui F6/28 purškiamoji tekstūros apdaila F5/30 pneumatinis 3 taškų reguliavimas (spindulio, fazės, vienodo frezavimo) F5/31 sujungimas iki 50 mm F5/32 LED apšvietimas Vieta: sandėlyje, 54634 Bitburgas Prieinamas iš karto – yra sandėlyje.

Būklė: naujas, Gamybos metai: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving. It also comes equipped with the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure your workpieces are optimally prepared for edge banding. The standard configuration includes a jointing unit (up to 2 mm milling depth), top-mounted quick-heating glue pot, end trim saw, and combination milling unit. Optionally, the F 2 can also be fitted with a flat scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Fsdpfslht Hzox Afqepl Features: F2 - 10 m/min F2 Next Edgebander With PLC control (including touchscreen) and automatic glue application on the workpiece for edge material up to 3 mm; jointing cutter (including diamond tool) up to 2 mm milling depth, maintenance-free glue pot with quick-change setup and glue discharge unit, high-frequency end trimming station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic height adjustment and interchangeable insert router (combination version), robust chain feed, ball-bearing double roller top pressure, inspection window at the back of the machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 Chassis F2/30 Pneumatic 3-point adjustment (radius, chamfer, flush trimming)

Būklė: naujas, Gamybos metai: 2026, Product Details Crosscut and Mitre Circular Saws Model ZS 200NF Crosscut and mitre circular saw with a maximum cutting height of 200 mm Robust cast iron construction Precision linear ball bearing guidance of the tool carriage on hardened and ground steel shafts Manual saw feed Quick mitre adjustment up to 65° horizontally and 60° vertically Re-adjustable fixed stops Lower saw blade guard can be connected to dust extraction Machine mounted on a mobile machine base with 1.5 m long roller conveyors on both left and right sides Left side equipped with scale and stop slider Technical Data Motor 400 V / 5.0 kW Speed 2,800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Mitre range horizontal 45°- 90°- 25° Mitre range vertical 60°- 90°- 30° Saw blade Ø Fpjdpocnz Rvefx Afqsl 520 mm (not included as standard) Extraction port 100 mm Weight 490 kg Location: Ex stock 54634 Bitburg - Immediately available - Upon request, we are happy to offer you the saw blade as well.

Būklė: naujas, Gamybos metai: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving. It also comes equipped with all the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure workpieces are perfectly prepared for edge banding. Standard features include a jointing unit (up to 2 mm cutting depth), an overhead quick-heating glue pot, end trimming saw, and combination milling unit. Optionally, the F 2 can also be fitted with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: F2 – 10 m/min feed speed Edge Banding Machine F2 next With PLC control (including touchscreen) and glue application specifically calibrated to the workpiece for edge material up to 3 mm; jointing cutter (including DIA tools) for up to 2 mm cutting depth, maintenance-free glue pot with quick-change system including glue drainage device, HF end trimming saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic adjustment and replaceable profile/flush trimming cutters (combination setup), robust chain feed, double roller pressure unit with ball bearings, viewing window from machine rear, extendable workpiece support, feed rate approx. 10 m/min. F2/10 mobile base F2/30 pneumatic 3-point adjustment (radius, bevel, and flush milling) Fpodpfxoi Am U Do Afqol

Būklė: naujas, Gamybos metai: 2025, Formatinė diskinė pjovimo staklės ALTENDORF F 35 tipas 3 - 1000 su įpjovimo agregatu 7,5 kW (10 AG), 3 sukimosi greičiai, Motorizuotas aukščio ir pasvirimo reguliavimas, Didelis apsauginis gaubtas, Dvigubas ritininis vežimėlis 3.200 mm, Įpjovimo agregatas su LED apšvietimu, CNC lygiagretus atmušėjas, pjovimo plotis 1.000 mm, Kampinis-linijinis atmušėjas Digit-L Stalviršio plokštės pailginimas/plitinimas, Su patikrintu CDF paviršiumi ----- Techniniai duomenys ----- Pasvirimo diapazonas: 0 - 46 °, Vežimėlio ilgis: 3.200 mm, Pjovimo ilgis: 3.100 mm, Pjovimo plotis: 1.000 mm, Pjovimo aukštis: 154 mm, Maks. pjūklo disko Ø: 450 mm, Fpodpfx Asxyl Ecsfqjl Variklio galia: 7,5 kW, Ekrano dydis: 15 colių, Darbo stalo aukštis: 910 mm, Ištraukimo jungties Ø: 80 + 120 mm Komplektacija: Altendorf F 35 tipas: III - 1000 7,5 kW (10 AG) 3 sukimosi greičiai (M51064) Kampinis-linijinis atmušėjas Digit L (pasirinktinai) (M44154) Vieta: Sandėlyje 54634 Bitburgas - Galima pristatyti iš karto -

Būklė: naudotas, Gamybos metai: 2015, Disko sukimosi kryptis: nuo operatoriaus į kairę. Maksimalus apdailos juostos storis: 3 mm. Minimalus apdirbamo gaminio storis: 8 mm. Maksimalus apdirbamo gaminio storis: 60 mm. Minimalus apdirbamo gaminio plotis: 80 mm. Minimalus apdirbamo gaminio ilgis: 190 mm. Pašaravimo greitis: 10 m/min. Įkaitinimo laikas: 5 min. Sujungimo agregatas: taip, su 2 frezavimo agregatais. Sujungimo įrankis: deimantinė keičiama plokštelė. Skersmuo: 100 mm. Aukštis: 44 mm. Įvado kreipiklio reguliavimas: rankinis. Galinis pjovimo staklės iki: 3 mm. Atskira briaunos padavimas: įmanomas. Klijavimas: klijų kontaktinis volelis. Skersinis pjūklas: taip. Kombinuotas agregatas: tiesus/nuožulnus/apvalus, pneumatiškai valdomas. Fedpfx Afezl Am Ieqepl Apvalinimo agregatas: pneumatiškai valdomas. Profilio traukimo peilis: pneumatiškai valdomas. Plokščio traukimo peilis: taip, su jutikliu. Agregatų indikatorius: ekrane. Valdymo tipas: PLC (programuojamas loginis valdiklis), tiesinis valdymas. Valdymas: jutiklinis ekranas. Variklio galia: 13,8 kW. Važiavimo įrenginys: taip. Ištraukiamas ritininis laikiklis: taip. Apsauginis gaubtas: taip. Svoris (apytiksliai): 1550 kg. Dulkių surinkimo skersmuo: 80/140 mm. Matmenys: 5000 mm. Sandėliavimo vieta:

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2016, mašinos/transporto priemonės numeris: 3074, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, įėjimo srovė: 32 A, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, ruošinio aukštis (maks.): 60 mm, briaunos storis (maks.): 3 mm, aukščio reguliavimo tipas: mechaninis, bendras aukštis: 1 618 mm, bendras ilgis: 4 984 mm, bendras plotis: 1 425 mm, bendras svoris: 1 400 kg, paskutinio kapitalinio remonto metai: 2025, Įranga: CE žymėjimas, Due to the procurement of a new machine, we are selling our reliable edge banding machine, purchased new in 2016. The machine was operated in an 8-person joinery workshop. A complete overhaul was performed in January 2025, including new radius scrapers, new milling tools, and new polishing wheels. The pre-milling unit was re-sharpened. The coupling of the glue roller shaft was replaced. The glue tank underwent thorough refurbishment and cleaning. The machine is suitable for EVA granulate (e.g., Henkel Dorus KS351) and PUR gluing as well. The degree of pre-milling, edge band thickness, and the position of the lower and upper milling tools can all be conveniently adjusted by handwheels located outside the machine housing. The control system allows you to save custom edge banding programs. Fpsdezhrdujpfx Afqsl For 0.4 and 2.0 mm edge banding, the machine automatically switches pneumatically from the control panel. Main specifications: - Power rating: 13.8 kW / 32 A / 400 V - Compressed air: 7 bar (100-150 l/min) - Touchscreen - Programmable/saved edge banding operations - Feed speed: 10 m/min - Edge material thickness in coil: 0.5-3.0 mm - Workpiece thickness: 8-60 mm (edge banding possible on 60 mm thick material) - Minimum workpiece width: 70 mm - Minimum workpiece length: 180 mm (for end trimming saw) / 220 mm (for corner rounding) - Machining units: - Diamond pre-milling unit (12,000 rpm) - Separator fluid tank/sprayer - Gluing unit - End trimming saw - R2 milling unit - R2 radius scraper - Corner rounding unit - Cleaning fluid tank/sprayer - Flat scraper - Polishing wheel The price of the machine does not include VAT.

Būklė: naujas, Gamybos metai: 2024, Holzkraft Edge Sander Model: KSO 200 F with Veneer Sanding Attachment Sanding unit tiltable up to 45° via lever The machine base, made of welded steel, ensures high torsional rigidity and vibration-free operation. Oscillating sanding belt with separate geared motor for improved sanding results Oscillation can be switched on or off as needed Graphite-coated platen for longer sanding belt service life Height-adjustable sanding table for full utilization of the belt width Height-adjustable auxiliary table with extraction for sanding radii Spring-loaded belt tensioner automatically compensates for belt length differences Double extraction ports Extendable roller table extension Sanding drum with rubber coating Veneer edge sanding device with contact shoe featuring fine adjustment, support rollers, and stop rulers Grooved infeed ruler for veneer overhangs Quick changeover from veneer edge sanding to solid wood sanding Dimensions and Weights Length approx. 1900 mm Width/Depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Fedpfx Aolht H Nefqopl Dust Extraction Connection Extraction port diameter 140 / 100 mm Drive Power Oscillation motor 0.25 kW Work Table(s) Work table length 960 mm Work table width 350 mm Work table height adjustment 230 mm Min. table height 735 mm Max. table height 965 mm Long table height adjustment 230 mm Cross table length 330 mm Cross table width 330 mm Cross table min. height 720 mm Cross table max. height 900 mm Cross table height adjustment 180 mm Electrical Data Main drive motor power 3.0 kW Supply voltage 400 V Sanding Unit Sanding belt length 3000 mm Sanding belt width 200 mm Belt speed 20 m/s Sanding area length 1050 mm Sanding area width 200 mm Oscillation stroke 20 mm Location: In stock at 54634 Bitburg - immediately available -

Būklė: labai geros būklės (naudotas), Hebrock F5 briaunų laminavimo staklės Gerai įrengta, galimybė patikrinti prieš perkant. Pradiniai frezai, Klijų uždėjimas voleliu, Fpedsza Uq Aepfx Afqsl Yra klijų nuleidimas, Indas keičiama, Antras indas komplekte. Pneumatiniai išankstiniai giljotininiai peiliai, Prispaudimo voleliai, Galutinio pjovimo pjūklas, Skysčiai įeina, Frezuojantis agregatas viršus-apačia, R1 – R2, Profilinė ciklina, Kampų apdirbimo agregatas, Plokščias ciklinas, Poliravimo įrenginys, Pneumatinis trijų taškų reguliavimas, Max. briaunos ritinyje storis 3mm, Energijos poreikis 7,8 kW, Maksimali detalės storis 50 mm, Naudota, labai geros būklės, Nudirbta 62 000 metrų.

Būklė: naujas, Gamybos metai: 2026, Holzkraft Minimax ST 5es – Maximum Specification for the Professional Saw-Spindle Moulder Combination with Mitre-Cutting Attachment and Tilting Spindle Moulder Art. No.: 5501086 Ø 350 mm main saw blade with maximum cutting height of 118 mm, which is also achieved with the scorer blade fitted Scoring unit with separate motor and Ø 120 mm saw blade, easily and precisely adjustable from the outside Saw unit tiltable from 90° to -45° High-precision format sliding table made of anodized aluminium Large outrigger (1200 x 650 mm) With material roller and extendable aluminium telescopic stop up to 3300 mm Tilting spindle moulder from 90° to -45° towards the fence Four spindle speeds With clockwise/anticlockwise spindle rotation Three independent motors With lockable main switch, motor protection switch Includes separate rip fence and separate jointer fence as standard Equipment details: Sliding table with ball contact system - Made from anodized aluminium - Guides made from hardened and ground steel, 15% harder than conventional steel Double-trunnion spindle moulder unit - Tilting, made from cast iron - Mounting points directly on the table ensure optimum smooth running - Spindle mounted high on precision ball bearings for minimal bearing load and maximum service life - Powerful industrial motors Moulder fence - Heavy-duty professional design - High-quality cast iron fence with fine adjustment as standard - 3-position for quick resetting of adjustments - Rack and pinion fine adjustment, numeric display, and aluminium fence jaws Rip fence - With fine adjustment and quick clamping - Stable round bar guide made from ground steel - Easily foldable for processing large workpieces - Reversible aluminium fence for narrow workpieces Cast iron double-trunnion saw unit - Height adjustment via dovetail guide - Extremely robust and torsion-resistant for precise cuts - Close to the saw blade, supported on both sides Fodpfx Afed Hx Hmjqopl - Height and tiltable up to 45° - Scoring unit with separate scorer motor 0.55 kW as standard Outrigger with angle-adjustable telescopic crosscut stop - With angle indexing Dimensions and weights Weight approx. 900 kg Dust extraction connection Extraction port diameter: 3 x 120 mm Extraction port diameter blade guard: 80 mm Drive output Scorer motor: 0.55 kW Main motor: 2 x 5.0 kW Electrical data Connection voltage: 400 V Sliding table and table Sliding table width: 360 mm Sliding table height: 142 mm Table length: 1380 mm Table width: 465 mm Spindle moulder Spindle tilt: 0 – -45° Usable spindle length: 125 mm Spindle speeds: 3500/6000/8000/10000 rpm Maximum milling tool diameter - Lowerable: 240 mm - Tenoning: 320 mm Circular saw unit and scorer Cutting length: 3200 mm Cutting width with rip fence: 900 mm Max. crosscutting width left of saw blade: 3300 mm Saw blade tilt: 90 - 45° Max. cutting height at 90°: 104 mm Max. cutting height at 45°: 68 mm Location: Ex stock 54634 Bitburg - Immediately available -

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2017, mašinos/transporto priemonės numeris: HMD-G-80-1000, Siūlau iš karto prieinamą, kaip naują Abel stūmoklinę membraninę siurblį, modelis HMD-G-80-1000, ketaus versija, pagaminta 2017 m., ką tik pilnai suremontuota ir naujai nudažyta. Maksimalus našumas 70 m3/val., maksimalus slėgis 15 bar, variklis 30 kW. Komplekte su nauju valdymo skydeliu, dažnio keitikliu ir slėgio davikliu. Ypač tinkama ilgo tipo 1200 ar 1500 kameros filtrų presui. Vietovė: 58762 Altena. Tereikia pastatyti, prijungti ir pradėti naudoti… Fsdpfjyxxmgex Afqopl

Būklė: naudotas, Gamybos metai: 2011, pneumatinis frezavimo nustatymas (tiesus/radiusas) Kombinuota frezavimo stotis R=2 Kampų apvalinimo freza R=2 iki 40 mm Sujungimo freza iki 40 mm Plokščias grandiklis Profilinis grandiklis R=2 trumpoms detalėms Valdymas SPS su Pro Face jutikliniu ekranu Nestingas Aušinimo/antistatika purškimas - airtronic Apsauginis briaunos purškimas Riepe su keičiamu rezervuaru Ruošinio storis: 8–60 mm Mechaninis briaunų spaudimas Ištraukimo jungtis: 140 mm Matmenys: Ilgis su išsikišimu: 4984 mm Gylis su ritininiu stalu: 1425 mm Maks. aukštis: 1618 mm Darbo stalo aukštis: 888 mm Svoris: 1400 kg Fodpfxsxyiilj Afqopl Sandėliavimo vieta: Nattheim

Būklė: naujas, Gamybos metai: 2024, Martin Thickness Planer T 45 with Tersa Cutter Block The T45 thickness planer offers ideal conditions for modern manufacturing: It produces smoothly planed surfaces, is quick and simple to operate, and also works exceptionally quietly. The standard electronic control with 99 programmable planing measurements makes setting the planing height so easy that your first workpiece will fit perfectly. The thickness table can be adjusted at the push of a button or incrementally in steps of 0.1 mm. All feed rate control elements are conveniently within reach. The heavy, vibration-dampening composite frame combined with the high-quality precision-mounted cutter block guarantees superior surface quality. Thanks to the sound-insulating construction, even the standard version operates at low noise levels. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Spindle speed: 5,000 rpm • Operation: 1-axis control for planing dimension, up to 99 values storable, 49 of which can be used for freely programmable planing sequences; buttons for manual rapid and fine adjustment of planing thickness with digital display, push button for cutter block start/stop, integrated operating hours counter • Cutter block: TERSA solid steel cutter block Z4 Ø 125 mm; includes lock for quick and easy knife change • Thickness table: Electronic height adjustment with fine tuning, adjustment speed 10 mm/s, tip-proof supported on 4 lifting spindles, finely planed table surface • Feed: 2 speeds 6 / 12 m/min, can be selected electrically even during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, gentle and self-cleaning rubber rollers, quick roller change; segmented pressure bar at infeed Fpedpfx Afoqlckpsqol • Extraction: Hinged, split hood with chip extraction port Ø 160 mm, can be connected left/right (both sides possible for special applications); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings/cutter block via grease nipples • Accessories: 1 grease gun with long-life grease 1 oil gun 1 open-end wrench 1 tool for knife changing 1 pair of dummy knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Workplace emission sound pressure level LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission: Low-dust according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Būklė: naujas, Gamybos metai: 2024, Surface Planer Martin T 54 Only with a high-quality surface planer can you truly achieve perfect foundations. The T 54 was developed with precisely this aim in mind. It enables you to dress workpieces easily at the most modern level and safely machine them with four-sided edges. The machine comes standard with a TERSA all-steel cutterblock. The Xplane cutterblock with a pulling cut is available as an optional extra. Chamfering is effortless thanks to the user-friendly single-handed adjustment, allowing any angle between 90° and 45° to be set quickly. The solid cast iron tables of the T54 provide a stable support, even for large and heavy workpieces. Should you require more support area, both the infeed and outfeed tables can each be extended by 380 mm – of course, these extensions are also made of cast iron. Technical data: Table width: 500 mm Table length: 2840 mm Max. cutting depth: 8 mm Cutterblock: Diameter 125 mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Motor power: 5.5 kW Fence adjustable up to 45° Auxiliary fence for small workpieces Motorised table adjustment Equipment: T 54 T 5462-a Suvamatic T 541-a Tersa cutterblock 4 knives Fjdpopgkmwefx Afqspl Location: In stock at 54634 Bitburg - Available immediately -

Būklė: naujas, Gamybos metai: 2024, Martin Thickness Planer T 45 with XPLANE Cutterhead The T45 thickness planer provides ideal prerequisites for modern production: It delivers superbly planed surfaces, is quick and simple to operate, and also runs exceptionally quietly. The standard electronic control allows you to store up to 99 planing heights, making setting the planing height so easy that the first workpiece already fits perfectly. Of course, the thickness table can be adjusted with a simple push of a button or incrementally in 0.1 mm steps. The controls for feed adjustment are conveniently positioned within easy reach. The heavy, vibration-damping composite frame combined with the high-quality cutterhead bearings guarantee outstanding surface finishes. Thanks to its sound-absorbing design, quiet operation is standard even in the basic version. Fpsdpfeqlck Nox Afqsl • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Min. workpiece length: 270 mm • Speed: 5,000 rpm • Controls: Single-axis control for planing height, up to 99 values storable, 49 of which can be used for a freely programmable planing sequence; buttons for manual rapid and fine adjustment of thickness via digital display, pushbuttons for cutterhead start and stop, integrated operating hours counter • Cutterhead: Solid steel Xplane cutterhead Cutterhead with 3 spiral knife rows (33 convex carbide knives per row), supplied with full knife set and one T-key Torx T20; spindle speed 6,000 rpm included; The emission sound pressure level LpA during operation is reduced by 10 dB(A). • Thickness table: Electronic adjustment with fine setting, travel speed 10 mm/s, supported by 4 anti-tilt spindles, finely planed table surface • Infeed: 2 speeds, 6 / 12 m/min, electronically selectable even during planing; large rubber feed rollers Ø 85 mm for compensating variable timber thickness, gentle and self-cleaning rubber rollers, simple roller swap; sectional pressure bar at infeed • Extraction: Highly pivotable divided extraction hood with 160 mm chip extraction port, can be connected left/right (both sides possible in special cases); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil points; lubrication of bearings/cutterhead via nipples • Accessories: 1 grease gun filled with long-life grease 1 oil gun 1 open-ended spanner 1 knife change tool 1 pair of dummy knives 640 mm 2 pairs TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at workstation LpA acc. to DIN EN ISO 11202 [dB(A)] No-load noise (no extraction) P1 65 No-load noise (with extraction) P1 77 Working noise (no extraction) P2 65 Working noise (with extraction) P2 78 Sound power level LWA acc. to DIN EN ISO 3746 [dB(A)] No-load noise (no extraction) 84 Working noise (with extraction) 90 Dust emission: Low-dust operation according to DGUV 209-044 / BGI 739-1 Location: ex-stock 54634 Bitburg - immediately available -

Būklė: naujas, Gamybos metai: 2023, lazerio galia: 8 000 W, Fiber laser machine HLF available from stock, ready for prompt delivery. An identical machine is powered up and available for testing at our facility. Specifications: - Power: 8kW - Sheet size: 3000 x 1500mm - Automatic shuttle table with ball rollers for scratch-free workpiece positioning - Siemens touchscreen control with LAN/USB - Siemens drives - Precitec autofocus Procutter cutting head - Sheet metal measurement - IPG resonator with 8kW / alternatively MAX Photonics - Small parts conveyor belt Includes: - Warranty - CAD / CAM software - Commissioning - Delivery (within Germany) - Donaldson extraction unit - Training offered This is a stock machine and therefore available at short notice. We have 300+ similar and identical machines powered up across Germany and Europe. Reference visits to existing users are always possible. Call us today! Fsdpsqgcwtsfx Afqepl

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, veikimo valandos: 2 025 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 25-168-T-402; 25-068-F-100-P, bendras svoris: 200 kg, Įranga: dokumentacija / vadovas, Pasiūloma „Soco System“ pakavimo įranga, kurią sudaro apatinis užlenkiamasis įrenginys F-100-P ir dėžių uždarymo įrenginys T-402-5-2-9. Mažiausias dėžės plotis: 320 mm, didžiausias dėžės plotis: 520 mm, didžiausias dėžės ilgis: 900 mm, įrangos matmenys (X/Y): apie 750 mm / 1150 mm. „Soco T-402 5-8-7“ dėžių uždarymo įrenginys, dėžių ilgio diapazonas: 200–750 mm, dėžių pločio diapazonas: 120–460 mm, dėžių aukščio diapazonas: 95–470 mm, našumas: 18 dėžių per minutę, didžiausias lipnios juostos ritinio skersmuo: 385 mm, svoris: apie 200 kg. Įskaičiuota apsauginė užtvara ir varomasis konvejeris, 500 mm pločio. Įranga yra nauja arba beveik nauja, įdiegta 2026 m. sausį ir veikė apie 75 dienas vienoje pamainoje. Dokumentacija yra. Galima apžiūrėti įrangą vietoje. Fpjdpfx Aezvp Uyefqol

Būklė: naujas, Gamybos metai: 2025, Woodworking Machines / Spindle Moulder Minimax twf55 es Item No.: 5502261 Robust steel and cast iron construction Anodized aluminum sliding table Large-scale milling unit made of cast iron, tiltable up to -45° to the rear Four milling speeds from 3,500 to 10,000 rpm Right- and left-hand rotation as standard Height and tilt display accurate to 1/10 mm Quick and easy speed change via eccentric clamping Solid and precise cast iron table, stress-free and annealed for long-lasting precision Powerful 5.0 kW industrial motor Curved milling protection hood included Made in Italy Dimensions and Weights Length (product): approx. 1200 mm Width/Depth (product): approx. 2000 mm Weight (net): approx. 510 kg Extraction Connection Fpedji Dphtopfx Afqel Extraction port diameter: 2 x 120 mm Work Table Work table length: 1200 mm Work table width: 530 mm Table height: 900 mm Sliding table length: 1200 mm Sliding table width: 360 mm Sliding table height: 142 mm Installation Information Required length: 2800 mm Required width/depth: 2910 mm Explanation required space: The dimensions take into account maximum travel or usable lengths. Machine body length: 1200 mm Machine body width/depth: 846 mm Working area length: 1600 mm Working area width/depth: 2300 mm Explanation working area: Please add the specified measurements to the required space to determine the recommended free installation area for the machine. Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Drive motor power: 5.0 kW Spindle Spindle tilting: 0 to -45° Usable spindle length: 125 mm Spindle speed(s): 3500/6000/8000/10000 rpm Spindle speed display: LED on the machine front Spindle shaft diameter: 30 mm Max. Milling Tool Diameter Max. tool diameter: 240 mm Max. lowerable tool diameter: 230 mm Max. profile milling diameter: 240 mm Max. tenoning cutter diameter: 320 mm EQUIPMENT Equipment Aluminum sliding table: ✔ Spindle fence: Heavy‑duty professional version with hold-down, safety guard, and aluminum fence cheeks Telescopic mitre fence: with two flip stops Extension table: ✔ Curved milling guard: ✔ Eccentric clamp: ✔ Sliding table handle: ✔ Spindle height adjustment: manual Spindle tilt adjustment: manual Control: manual height and tilt adjustment of the milling unit Control element position: on the machine body Location: In stock at 54634 Bitburg - Available immediately -

Būklė: naujas, Gamybos metai: 2025, A thoroughly reliable, mobile family: You can obtain AL-KO POWER UNIT® extraction systems for maximum airflows between 790 and 10,000 m³/h. This makes the energy-efficient AL-KO POWER UNIT® models the perfect solution for small and medium extraction volumes, or an ideal supplement to existing stationary systems. Your advantages: • IE3 motor as standard • Approx. 73 m² filter area • Pre-separator as standard • Certified according to GS-HO-07 • H3 residual dust content of 0.1 mg/m³ reliably maintained (wood dust) • Optional type-tested rotary valve (FSA) • Tested backpressure flap • Integrated automatic extinguishing system Fpsdpfx Afehkzt Neqol Technical data: • Rated motor power: 11.0 kW / 3-phase • Voltage: 400 V / 50 Hz • Max. airflow: up to 8,500 m³/h at the fan • Rated airflow: 6,927 m³/h • Negative pressure at rated flow: 2,543 Pa • Suction connection: 350 mm • Noise level: 71 dB(A) at full load (according to DIN EN ISO 11201) • Chip collection volume (net/gross): 3 x 165 L / 3 x 250 L • Dimensions (L x W x H) in mm: 3,130 x 1,058 x 2,361 • Net weight without packaging: 977 kg - Dust class H3 Location: In stock at 54634 Bitburg - Immediately available – as the unit is in stock Subject to prior sale

Būklė: naujas, Gamybos metai: 2025, Rojek Panel Saw PF 350 Industrial Version The machine design incorporates numerous technical innovations that enhance the practical usability of this unit. Its high-quality workmanship places this panel saw among the best in its class. The machine comes standard with an aluminum sliding table CV 360T, featuring highly precise and stable mounting on hardened rods. Optional equipment includes the more rigid, multi-chamber construction aluminum sliding table CV 400T, with a precision steel rod mounting. Size of the aluminum sliding table: 400 x 3200 mm. Precision and reliability are ensured by the robust cast iron chassis with substantial tilt segment guides for the sawing mechanism and an independent motor for the scoring unit. TECHNICAL DATA Saw Fedpfx Afjn D Arhjqjpl Motor power S6 40%: 7.5 kW / 3×400 V Motor speed: 2,870 rpm Maximum blade diameter with scorer: Ø 350 mm Spindle diameter: 30 mm (1″) Saw blade spindle speed: 4,450 rpm Max. cutting height: 120 mm (83 mm at 45°) Saw blade tilting: 0° to 45° Max. cutting width: 1,300 mm Scoring unit Scoring motor power: 0.75 kW (1 kW) Scoring blade diameter: Ø 120 mm (100 mm) Spindle diameter: Ø 20 mm Speed: 8,530 rpm Machine dimensions Length: 3,355 mm Width: 3,450 mm Table height: 892 mm Max. machine height: 1,460 mm Table size: 1,185 x 500 mm Extraction port diameter: 100 + 100 mm Gross weight: 680 kg Net weight: 675 kg Aluminum Sliding Table CV360T Table size: 3,200 x 360 mm Support frame size: 1,240 x 650 mm Cutting length: 3,200 mm Power supply fuse: 16 A (25 A) Sound pressure level (without equipment): 81.8 dB(A) Sound pressure level (with equipment): 85.3 dB(A) Location: In stock at 54634 Bitburg - Available immediately -

Būklė: naujas, Gamybos metai: 2025, Description Technical data Scope of delivery Accessories Equipment options Ideal for demanding craftsmen and joiners The especially long one-piece planer tables ensure easy planing of workpieces Work tables are made of cast iron, making them resistant and permanently flat Rearward, simultaneously opening planing tables with spring support for fast and convenient conversion Thanks to the fixed-mounted extraction hood, no need to reconnect the extraction hose when converting, saving valuable working time Helically grooved steel infeed roller ensures constant and even wood feed Rubber outfeed roller at the thicknessing exit ensures smooth wood extraction Material feed with four selectable speeds Thicknessing table adjustment via handwheel with integrated thickness height display DIGITAL version: with electric thicknessing table height adjustment and digital display On/off switch in operator’s position Powerful industrial motor High machine weight guarantees top precision and smooth operation Prepared for slot mortising unit Quality Made in Italy Dimensions and weights Length approx. 2250 mm Width/depth approx. 1370 mm Weight approx. 695 kg Planer (Jointer) Total table length: 2250 mm Max. planing depth: 5 mm Fence length: 1200 mm Fence height: 150 mm Dust extraction connection Thicknesser extraction port diameter: 1 x 120 mm Drive power Main motor: 7 kW Installation information Fpedpfoff Hdpex Afqsl Required space length: 2250 mm Required space width/depth: 1440 mm Explanation required space: The dimensions take into account maximum traverses or working lengths. Thicknesser Thickness table length: 850 mm Thickness table width: 520 mm Min. working height: 3 mm Max. working height: 240 mm Min. working length: 220 mm Max. planing depth: 5 mm Electrical data Connection voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Cutterblock Type: TERSA Diameter: 120 mm Number of knives: 4 pcs Speed: 5000 rpm Max. planing width: 520 mm Feed Speed: 5/8/12/18 m/min

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Al-Ko clean air dust extractor Ex-demonstration unit Offered at a special price Technical data Power Unit 250 P Inlet diameter: 250 mm Motor rated power: 6.5 kW / 3 phase Voltage: 400 V / 50 Hz Maximum air flow rate: 4900 m³/h Nominal air flow rate: 3524 m³/h Negative pressure: 2451 Pa Filter area: 22.4 m² Chip collection volume: 2 x 250 L Dimensions (L x W x H) in mm: 2305 x 994 x 2351 Fpedpfx Ascdr Enefqel Weight: 758 kg Location: 54634 Bitburg warehouse Subject to prior sale

Būklė: labai geros būklės (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, paskutinio kapitalinio remonto metai: 2025, Parduodu profesionalią naudotą kraštų laminavimo mašiną Hebrock AKV 3007 DK-F, pagamintą 2016 metais, su papildoma įranga (išvardinta žemiau). Pirmas savininkas. Praėjusiais metais atliktas kapitalinis remontas (pakeistas transportavimo diržas ir pavaros ritinėliai, atnaujintas klijų puodas). Mašina dirbo po vieną pamainą po 8 valandas per dieną, nuo pirmadienio iki penktadienio. Įrenginys skirtas efektyviam baldinių detalių briaunų apklijavimui PVC, ABS, melamino ir faneruotės briaunomis. Modelis vertinamas dėl aukštos apdirbimo kokybės, tvirtos konstrukcijos ir galimybės dirbti nepertraukiamu režimu. Kaina: 85 000 PLN be PVM Fodpfxjzizabo Afqjpl Būklė – labai gera. Įranga techniškai puikios būklės, reguliariai prižiūrima ir paruošta darbui be papildomų investicijų. 23% PVM sąskaita faktūra. Paruošta atsiėmimui. Įrenginį galima apžiūrėti iš anksto susitarus Borowo (83-332) mieste. Kviečiu skambinti dėl išsamesnės informacijos, vaizdo įrašų ir nuotraukų apie mašinos darbą. Pagrindiniai parametrai ir specifikacija: - Klijavimo sistema: viršutinis bakas granuliuotiems klijams. Mašina dirba su standartiniais (EVA), poliuretaniniais (PUR) bei nulinės siūlės sistemomis. - Briaunos matmenys: nuo 0,4 iki 3 mm storio briaunoms, detalių storis – nuo 10 iki 60 mm. - Maitinimas ir galia: 400 V / 3 fazės / 50 Hz. Maks. galia 14 kW. - Surinkimo agregatai: kapavimo pjūklas, ciklinimo freza, kampų apvalinimo freza, profilio ciklinas ir poliravimo agregatas. - Papildoma įranga: pneumatinis spindulio/nuolydžio perjungimas, keičiama klijų puodo opcija, priekio įpjovimo pjūklas, lėtasis padavimas, priekio purškimas, valymo purškimas. Išsamus aprašymas: Vokiškos Hebrock firmos siaurų plokštumų apklijavimo mašina su klijų užnešimo sistema ant briaunos ir galimybe apklijuoti nuo 0,4 iki 3 mm storio briaunas, detalių storis – nuo 10 iki 60 mm, bei išankstiniu diamantiniais frezais atliekamu ruošinio frezavimu. Mašina optimizuota darbui su visų tipų briaunomis. Valdymas vykdomas kompiuteriu ir SPS valdikliu, kas užtikrina pilną atskirų agregatų kontrolę. Patentų Hebrock sistema leidžia nustatyti apatinę ir viršutinę frezą iš išorės mašinos veikimo metu, taip pat automatiškai perjungti tarp plonos ir storos briaunos, todėl nereikia atidarinėti galinio dangčio, o tai taupo laiką, užtikrina komfortą, tikslumą ir patogią eksploataciją. Techniniai duomenys: • Briaunos storis: 0,4–3 mm • Detalių storis: 10–60 mm • Maks. briaunos aukštis: 65 mm • Suspausto oro poreikis: apie 450 l/min • Padavimo greitis: 7–11 m/min, 0,75 kW variklis • Klijų pašildymo laikas: 6 min. • Bendra galia: maks. 14 kW • Elektros jungimas: 400V, 50Hz • Darbinis aukštis: 880 mm • Mašinos matmenys [mm]: 5850 × 1425 × 1520 • Svoris: 1600 kg • Ištraukimo pajungimo diametras: ø 140 mm • Reikalingas ištraukimo našumas: 24 m³/min • Min. oro greitis ištraukimo anga: 20 m/s • Reikalingas vakuumas ištraukimo anga: 1300 Pa

Būklė: naujas, Gamybos metai: 2026, Maks. briaunos storis: 3 mm Min./maks. ruošinio storis: 8 - 50 mm Min. ruošinio ilgis: apie 160 mm Paruošta darbui: apie 3,5 min. Svoris: apie 900 kg Fpodpjhymgdjfx Afqel Maks. galingumo sąnaudos: Ø apie 7,4 kW Ištraukimo antgalis: Ø 1 x 140 mm Elektros jungtis: 400 V - 3 fazės - 50 Hz Darbo stalo aukštis: apie 900 mm Padavimo greitis: apie 10 m/min Staklių matmenys: apie 4.300 x 1.300 x 1.400 mm (Ilg x Pl x Auk) Kombinuota frezavimo galvutė Radiuso freza R = 2 mm Radiuso kampinė freza R = 2 mm Radiuso traukimo peilis R = 2 mm Briaunos purškimo sistema Pneumatinis 3 taškų reguliavimas (radiusinis, kampinis, lygus frezavimas)