Frech Daw 200S pirkti naudotą (11 054)

Būklė: naudotas, Gamybos metai: 1995, Clamping force: 2200 kN Clamping platen: 755x755 mm Tie bar distance: 500x500 mm Machine weight: approx. 8 t Fpedpfx Asvxlufjf Asg Clamping stroke: 430 mm Ejector force: 110 kN Ejector stroke: 100 mm Die height: 250-600 mm Tie bar diameter: 85 mm Injection force: 130 kN Injection stroke: 175 mm Injection plunger diameter: 70, 80, 90 mm Injection volume (DIN 24480): 450, 636, 856 cm³ Specific injection pressure: 335, 260, 203 kp/cm² Associated parting surface: 656, 846, 1078 cm² Withdrawal stroke: 230 mm Used die casting machine DAW 200 S with Datavario control system for processing zinc alloys. Available upon agreement. The manufacturer's recommendation is a general overhaul at a certified service center. The scope of the overhaul can be agreed upon.

Būklė: naudotas, Gamybos metai: 1992, Uždarymo jėga 600 kN Tvirtinimo plokštė 460x460 mm Atstumas tarp kolonų 300x300 mm Fodpsfrvzvofx Af Aopg Mašinos svoris apie 4,5 t Uždarymo eiga 230 mm Išstūmimo jėga 40 kN Išstūmimo eiga 70 mm Formos aukštis 120-350 mm Kolonų skersmuo 56 mm Liejimo jėga 55 kN Liejimo eiga 130 mm Liejimo stūmoklio skersmuo 45, 50, 55 mm Liejimo tūris (DIN 24480) 76, 121, 165 cm² Specifinis liejimo slėgis 345, 280, 231 kp/cm² Atitinkamas dalijimosi paviršius 174, 214, 260 cm² Atbulinės eigos eiga 150 mm Naudota liejimo mašina DAW 50 su SBC2 valdymu, skirta cinko lydiniams. Galima įsigyti iš naudotų mašinų sandėlio. Mašina komplektuojama su Rauch MO50E elektrine krosnimi ir naudotu Oskar Frech 401 pneumatiniu purkštuvu. Gamintojas rekomenduoja atlikti kapitalinį remontą specializuotame servise. Remonto apimtis bus suderinta pagal susitarimą.

Būklė: naudotas, Gamybos metai: 2000, Clamping force: 900 kN Clamping platen: 540 x 540 mm Distance between tie bars: 350 x 350 mm Machine weight: approx. 5.5 t Clamping stroke: 280 mm Ejector force: 60 kN Ejector stroke: 70 mm Mould height: 160–400 mm Tie bar diameter: 65 mm Casting force: 75 kN Casting stroke: 130 mm Casting piston diameter: 50, 55, 60 mm Casting volume (DIN 24480): 119, 163, 214 cm³ Specific casting pressure: 380, 315, 265 kp/cm² Corresponding parting surface: 236, 285, 340 cm² Downstroke: 150 mm Completely overhauled DAW 80 GO die casting machine with DataLogic control system for use with zinc alloys. Excerpt from the general overhaul: · Upgrading the machine with a new control cabinet and new operator panel, including replacement of all electrical wiring. · Renewal of hydraulics (blocks and valves). · Overhaul of the clamping unit. Detailed list available upon request. Fpsdpoyzt D Ejfx Af Ajg The machine is equipped with the following options: - Motor-driven safety door, casting direction left - Discharge chute cover on the machine base (straight) - Free-standing operator panel 1.0.2 Discharge chute cover for machine base 3.2.4 Multi-chamber holding and melting furnace with TOC pump 3.2.1 Furnace control cabinet for furnace type Z 4.0.1 Use of water-glycol 4.2. – Side GO 6.1.3.1 Wired signal interface for part removal (DISPO10) 6.5.2 RSD equipment package with switch 7.2.2.2 Spraymotion 611 E with servo drive, single-circuit 7.3.1 Release agent container TD 20 7.4.0.3 Spray bar CR 275 Additional options are available upon request.

Būklė: naudotas, Gamybos metai: 1994, Funkcionalumas: ribota funkcionalumas, Used Oskar Frech DAW 125 with control cabinet and crucible Fpjdpfx Afewywn Es Aog

Būklė: naudotas, Gamybos metai: 1994, Clamping force: 600 kN Clamping platen: 460 x 460 mm Tie bar spacing: 300 x 300 mm Machine weight: approx. 4.5 t Clamping stroke: 230 mm Fpedpfx Afstuxmyo Asg Ejector force: 40 kN Ejector stroke: 70 mm Mould height: 120–350 mm Tie bar diameter: 56 mm Injection force: 55 kN Injection stroke: 130 mm Injection piston diameter: 45, 50, 55 mm Injection volume (DIN 24480): 76, 121, 165 cm³ Specific injection pressure: 345, 280, 231 kp/cm² Corresponding parting surface: 174, 214, 260 cm² Ejector withdraw stroke: 150 mm Used machine: DAW 50 as a basis for a complete overhaul, without control cabinet, furnace, or furnace cabinet. A general overhaul can be carried out at the manufacturer’s refurbishment facility. The scope of the overhaul can be agreed upon on an individual basis.

Būklė: reikia remonto (naudotas), Gamybos metai: 2001, Funkcionalumas: neveikiantis, FRECH DAK 720-71 RC liejimo mašina, naudota. Mašinos numeris 440403, užspaudimo jėga 8000 kN, užspaudimo eiga 825 mm, išstūmimo jėga 364 kN, išstūmimo eiga 180 mm, formos aukštis 350–1000 mm, užspaudimo plokštės 1300 x 1300 mm, stulpelio atstumas 825 mm, stulpelio diametras 180 mm, liejimo jėga maks. 713 kN, liejimo eiga 600 mm, liejimo stūmoklio diametras 70–120 mm, liejimo tūris 1539–4523 cm³, darbinis slėgis 160 bar, variklio galia 45 kW, su dozavimo krosnimi MELTEC AVDF 1200/5000, pagaminimo metai 2017, serijos numeris nenurodytas, sistema kaip atsarginių dalių donorė. Techniniai duomenys: matmenys (ilgis x plotis x aukštis) apie 8000 x 7500 x 3500 mm, svoris apie 36000 kg, pagaminimo metai 2001. Fsdswc Tdzjpfx Af Aepg

Būklė: naudotas, Gamybos metai: 2017, Didžiausias ruošinio svoris – 2000 g Naudotos svarstyklės, skirtos naudoti liejimo mašinose, kai maksimalus vieneto svoris iki 2000 g. Nuimta iš veikiančios gamybos linijos. Įrenginys gamintojo buvo patikrintas ir suremontuotas. Fpjdpfey Diauex Af Aeg

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1989, An aluminium die casting machine is available. Clamping force: 2200 kN, opening force: 71 kN, max. opening stroke: 430 mm, mould locking: double toggle lever, shot chamber: cold chamber, orientation: horizontal. Shot plunger diameter min./max.: 40 mm/70 mm, shot chamber fill volume min./max.: 293 cm³/898 cm³, casting pressure: 1990 bar, projected area min./max.: 110 cm²/338 cm², capacity: 780 cycles/h. Platen dimensions X/Y: 755 mm/755 mm, tie bar distance: 500 mm/500 mm, mould height min./max.: 250 mm/600 mm, min. mould dimensions X/Y: 296 mm/296 mm. Includes crucible furnace, blow-off unit, dosing unit, and 4x control cabinets. Documentation available. Fpodpfx Afeucfwpj Ajg

Gamybos metai: 1988, būklė: naudotas, Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers - Industrial trailer with: single-axle turntable steering - 4 roller conveyors, rollers: Ø 65 x 365 mm - Load capacity: max. 6,800 kg - Tyres: solid rubber - Trailer coupling - External dimensions: 4,760 x 2,730 x H 585 mm Fpodpfofk Smuex Af Ajg - Dead weight: 1,100 kg

Būklė: naujas, Gamybos metai: 2020, Clamping force: 600 kN Clamping platen: 460 x 460 mm Tie bar spacing: 300 x 300 mm Clamping stroke: 230 mm Ejector stroke: 70 mm Ejector force: 40 kN Mould height: 120–350 mm Tie bar diameter: 56 mm Injection force: 54 kN Injection stroke: 130 mm Injection piston diameter: 45, 50, 55 mm Casting volume (DIN 24480): 109, 150, 194 cm³ Specific injection pressure: 339, 274, 226 daN/cm² Associated parting surface: 176, 218, 264 cm² Machine weight: approx. 3.5 t Machine equipment: 1.0.1 Clamping unit cover on machine base 1.0.2 Clamping unit cover on machine base for scale/chute Fpsdpfx Asiu Smbef Aog 1.1.0 Motorized safety door, casting direction left 1.4.0 Machine mountings 1.5.4 Interior machine lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Advantage package ejector 2.4.2 Ejector plate lock, mould side 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of clamping unit 3.1.1 Nitrogen pressure monitoring for accumulator 3.2.4 Multi-chamber holding and melting furnace 3.2.5 Insulated crucible cover for multi-chamber furnace 3.4.4 Casting system pre-fill 3.4.5 Simplified injection piston removal 3.4.6 Injection piston stop on return stroke 3.5.2 Electric nozzle and casting pot heating 4.5.0 Hydraulic assembly shut-off device 4.6.1.2 Integrated water circuit control, 2+4 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.2 Equipment package – casting comfort 5.2.1 Ejector pressure graph 5.4.1 Data acquisition Scope 5.4.2 Programmable inputs and outputs 5.6.0 Special cable lengths 6.0.0 INTERFACES / OPERATING CONCEPTS 6.1.3.1 Digital interface for third-party extraction unit 6.1.4 Serial interface for 4 heating/cooling circuits 6.3.1.1 Operator unit with visualisation on support arm 6.5.2 Equipment package RSD with switch 7.0.0 ADDITIONAL DEVICES 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spraying programme 7.3.1 Release agent tank TD 20 7.4.0.2 Spray bar CR 245 7.12.3 Sound-insulated reject chute OF70 70 Years FRECH – Anniversary Package

Būklė: naujas, Gamybos metai: 2025, Clamping force 240 kN Clamping plate 380x380 mm Distance between tie bars 250x250 mm Machine weight approx. 3.0 t Clamping stroke 180 mm Ejector force 28 kN Ejector stroke 50 mm Mould height 120–300 mm Tie bar diameter 45 mm Injection force 43 kN Injection stroke 85 mm Injection plunger diameter 36, 40, 45 mm Injection volume (DIN 24480) 47, 63, 87 cm³ Specific injection pressure 420, 340, 270 daN/cm² Fpsdpox Hp E Aefx Af Ajg Relevant parting surface 56, 70, 88 cm² Ejector return stroke 150 mm Machine Equipment 1.0.2 Clamping unit cover on machine frame for scale / chute 1.0.3 Small parts cover in machine frame 1.1.0 Motorized safety door, die-casting side left 1.4.0 Machine mountings 1.5.4 Machine interior lighting 1.11.0 Equipment package – energy efficiency 2.0.1.2 Ejector assistance package Technology incl. SensiEject 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of clamping unit 3.0.1.2 Injection assistance package Technology incl. SensiInject 3.2.9 EcoMelTec multi-chamber holding and melting furnace 3.4.4 Pre-filling injection system 3.4.5 Simplified injection plunger removal 3.4.6 Injection plunger stop on return stroke 3.5.2 Electric nozzle and injection chamber heating 3.5.3 Pluggable connectors for electric nozzle and injection chamber heating 4.5.0 Shut-off device for hydraulic assemblies 4.6.1.2 Integrated water circuit control 2+4 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.5 Maintenance advantage package 5.6.1 Cable lengths 6.1.3.1 Wired signal interface for parts removal unit DISPO10 6.1.4 Serial interface for 4 heating/cooling circuits 6.1.5 Interface for vacuum unit 6.3.1.1 Operating unit with visualization on support arm 6.5.2 RSD equipment package with switch 7.2.1.2 Spraymotion 411 E with servo drive 7.2.10 Extended spray program 7.3.1 Release agent tank TD 20 7.4.0.1 Spray bar CR 155

Būklė: naujas, Gamybos metai: 2018, Crucible capacity 420 kg Fjdetv Rlzopfx Af Ajpg As-new and unused industrial furnace for DAW20A or DAW20S. The Metec Type Z20/120C furnace is equipped with a long-lasting stainless steel crucible. The crucible has a capacity of 420 kg, and the melting capacity is 120 kg/h with a connected load of 21.5 kW. A suitable control cabinet can be custom-built if required.

Būklė: naudotas, Gamybos metai: 2007, Used electric sprayer Spraymotion 411 E for use on die casting machines. The device has been function-tested by the manufacturer. Includes spray and blow bar (SR system with adjustable nozzles) and stand. Connection: 24-pin plug Traverse module with 400 mm stroke Fpodpfx Afotwfkne Ajg

Būklė: naujas, Gamybos metai: 2024, Clamping force: 900 kN Clamping platen: 540 x 540 mm Distance between tie bars: 350 x 350 mm Machine weight: approx. 5.3 t Clamping stroke: 280 mm Ejector force: 61 kN Ejector stroke: 70 mm Mold height: 160-400 mm Tie bar diameter: 65 mm Injection force: 78 kN Injection stroke: 130 mm Injection plunger diameter: 50, 55, 60 mm Injection volume (DIN 24480): 147, 191, 241 cm³ Specific injection pressure: 396, 327, 275 daN/cm² Associated parting surface: 226, 274, 326 cm² Eject stroke: 220 mm Machine Equipment 1.0.2 Clamping unit cover on base frame for scale / chute Fedpfx Ajr Hwf Ajf Aepg 1.1.0 Motorized safety door on injection side left 1.4.0 Machine mountings 1.5.4 Interior machine lighting 1.11.0 Equipment package - Energy efficiency 2.0.1 Ejector advantage package 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of clamping unit 3.0.1 Injection assistance advantage package 3.2.9 EcoMelTec multi-chamber holding and melting furnace 3.4.4 Pre-filling injection system 3.4.5 Simplified injection plunger removal 3.4.6 Injection plunger stop on return stroke 3.5.2 Electric nozzle and injection chamber heating 3.5.3 Plug connectors for electric nozzle and injection chamber heating 4.5.0 Shut-off device for hydraulic assemblies 4.6.1.3 Integrated water circuit control 2+6 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.5 Maintenance advantage package 5.6.1 Special cable lengths 6.1.3.1 Digital interface for third-party extraction unit 6.1.4 Serial interface for 4 heating-cooling circuits 6.1.5 Interface for vacuum device 6.3.1.1 Control unit with visualization on support arm 6.5.2 RSD equipment package with switch 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spray program 7.3.1 Release agent container TD 20 7.4.0.3 Spray bar CR 275

Būklė: naujas, Centrifuginis siurblys KSB ETANORM SYT ETNY065-040-200 NAUJAS 2024, 25,6 m3/h, 46 m Parduodamas aukštos kokybės vokiško gamintojo KSB centrifuginis siurblys, modelis ETANORM SYT ETNY065-040-200. Įrenginys naujas, sandėlio likutis originalioje KSB pakuotėje, puikiai tinka pramoninėms vandens tiekimo, šildymo ir vėsinimo sistemoms. TECHNINIAI DUOMENYS: Gamintojas: KSB Modelis: ETANORM SYT ETNY065-040-200 Našumas Q: 25,6 m3/h Kėlimo aukštis H: 46 m Apsisukimų dažnis: 2950 aps./min Siurblio ratuko skersmuo: 187 mm Fodeywu Uqopfx Af Ajpg Korpuso medžiaga: EN GJS 400-15 Pagaminimo metai: 2024 Flanšiniai pajungimai BŪKLĖ Naujas, nenaudotas, sandėlio likutis Galimi minimalūs sandėliavimo žymės Originali KSB pakuotė PANAUDOJIMAS Pramoninės instaliacijos Vandens cirkuliaciniai siurbliai ŠVOK sistemos Šildymo ir vėsinimo instaliacijos Siurblinės

Būklė: naudotas, Gamybos metai: 2003, X ašis: 1 660 mm Y ašis: 510 mm Z ašis: 510 mm Valdymo sistema: Mazatrol 640M Greito padavimo greitis: 30 000 mm/min Padavimo greitis: 8 000 mm/min Sukimosi greičio diapazonas: 40 - 12 000 aps./min. Stalas: 2 000 x 510 mm T–lizdų skaičius: 5 Fpodpfsy Nlv Nsx Af Aeg T–lizdo matmuo (ISO R299): 18 mm T–lizdų atstumas: 100 mm Maksimali stalo apkrova: 1 000 kg Ašies–stalo atstumas (nuo veleno iki stalo): 180 - 690 mm Veleno centras iki kolonos: 530 mm Stalo aukštis: 750 mm

Būklė: naudotas, Funkcionalumas: ribota funkcionalumas, įėjimo įtampa: 400 V, paskutinio kapitalinio remonto metai: 2021, bakelio talpa: 200 l, Įranga: dokumentacija / vadovas, Handtmann VF 200 kimšimo mašina, skirta naudoti maisto pramonėje, idealiai tinka maisto masės kimšimui į apvalkalus. Tvirta konstrukcija užtikrina ilgaamžiškumą ir patikimą veikimą. Pilnas įrenginys. Būklė: reikalinga apžiūra. Fedpjy Ry H Ejfx Af Aepg

Būklė: paruoštas naudoti (naudotas), Drožlių transporteris, drožlių konvejeris, Knoll 320 S-1/200, naudota mašina Gamintojas: Knoll Tipas: 320 S-1/200 Bendri matmenys: Plotis: 6200 mm Gylis: 1300 mm Aukštis: 1610 mm Juostos specifikacija: 480 x 130 x 60 x 310 mm Juostos greitis: 1,8 m/min Pagaminimo metai: 2015 Išmetimo angos matmuo: 550 x 530 mm Fjdextwqdspfx Af Aspg Bunkerio anga: 3120 x 410 mm Skersiniai žingsnis: 315 mm

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, bendras ilgis: 3 280 mm, bendras aukštis: 2 700 mm, bendras plotis: 2 000 mm, bendras svoris: 11 000 kg, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, garantijos trukmė: 12 mėnesiai, PRESS BRAKE 200T × 3200 mm The press brake is used for forming sheet metal. During the ram stroke cycle, the sheet can be bent and adapted to the desired geometric cross-section. The machine is suitable for use in many industries – such as the electromechanical industry, light industry, agricultural machinery manufacturing, shipbuilding, automotive industry, aerospace industry, etc. Machine Features - Back gauge position control - Intelligent position control - Recall functions - Automatic reference point search Fedpfx Aeyttbmof Ajpg - Parameter backup and restoration with identification - Fast position indexing - Memory for 40 machining programs, each with 25 steps - Power failure protection Technical Specifications - Pressing force: 200 T - Maximum workpiece length: 3200 mm - Distance between uprights: 2530 mm - Throat depth: 320 mm - Ram stroke: 200 mm - Maximum opening height: 455 mm - Motor power: 11 kW - Weight: 11,000 kg - Machine dimensions (L × W × H): 3280 × 2000 × 2700 mm Equipment - MTP-3212 control unit - Ball-guided back gauge - Two back gauge fingers - Two front supports - Cylinder covers - Optical safety light curtains (front) - Safety guard (rear) - Foot pedal - AMADA-type punch holder - Four-sided lower tool die - Electrically driven back gauge - Segmented punch with possibility to replace a damaged segment Delivery Terms - The machine is brand new - 12-month warranty - Warranty service - Post-warranty service - CE Declaration of Conformity - Operating manual in English Delivery to the customer is possible. Shipping costs are calculated individually by the transport company. If you are interested in other machines, please visit our website.

Būklė: naudotas, Gamybos metai: 2010, Lazerinio pjovimo staklės Gamintojas: Eurolaser Tipas: LCS XL-1600 Pagaminimo metai: 2010 Galia: 200 W Darbinis plotas: 2.270 mm x 1.600 mm Elektros duomenys: maks. 6 kW / maks. 32 A Fpedpoyvk R Esfx Af Aog Ankstesnė taikymo sritis: Akrilinio stiklo pjovimas Lazerių šaltinis atnaujintas prieš 5 metus ä12526

Gamybos metai: 2023, būklė: labai geros būklės (naudotas), Sąskaita: Išrašau PVM sąskaitą Markė: be prekės ženklo Tipas: hidraulinė pompa Modelis: Tipas - CBL 50-200/200 Gamintojo kodas: 2 Fodpfx Afey Amumo Aepg Pakuotės būklė: be pakuotės

Gamybos metai: 2005, būklė: naudotas, Rankinis ilgio reguliavimas per rankinį ratuką su skaitmeniniu ekranu Fpodpfxjy N Dcbo Af Aeg

Gamybos metai: 2007, būklė: naudotas, Didžiausias apdirbimo ilgis: 2 600 mm Y ašies eiga: 315 mm Z ašies eiga: 230 mm Frezuotuvo veleno apsukos bepakopės: reguliuojamos nuo 2 800 iki 12 000 aps./min. Pasukamas atraminis stalas nuo 0° iki 180°, leidžia apdirbti tris puses per vieną prispaudimą X ir Y ašys CNC valdomos, Z ašis motoriškai bepakopiai nuleidžiama 4 pneumatiniai medžiagos spaustuvai Rankinis įrankių keitimas Minimalios tepimo įranga USB jungtis Naudojimo instrukcija Fodpfx Afoy N Da Ts Aspg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2015, LAUDA Integral XT 1590 WS Manufacturer: LAUDA Dr. R. Wobser GmbH & Co. KG Fpjdpfx Afsy Rmimj Aeg Model: Integral XT 1590 WS Order No.: LWP 551 Serial No.: LWP551-15-0010 Year of manufacture: approx. 2015 (derived from serial number) Design: Process thermostat / circulation chiller For sale is a used LAUDA Integral XT 1590 WS temperature control and cooling system for industrial applications in laboratories, research, chemistry, pharmaceuticals, and production. This unit is suitable for precise temperature control of external circuits, reactors, test benches, and process plants. Technical data according to nameplate: Voltage: 400 V / 3~ / PE / 50 Hz Power consumption: 13.8 kW Heating capacity: 8.0 kW Protection rating: IP21C Refrigerant circuit I: Refrigerant: R404A Charge: 3.5 kg Refrigerant circuit II: Refrigerant: R508A Charge: 1.75 kg Technical data according to manufacturer: Operating temperature range: approx. -90 °C to +200 °C Cooling capacity: up to approx. 15 kW at +20 °C Max. pump pressure: approx. 2.9 bar Max. pump flow rate: approx. 45 l/min Filling volume: approx. 10.5 – 17.4 liters Features: - LAUDA Command control system - Digital temperature regulation - Graphic display / LCD readout - RS232 / RS485 interface - Vario pump - Magnetically coupled pump - Connections for external temperature control circuits - Mobile floor-standing unit - Industrial design Condition: Used unit with age- and use-related wear. Please refer to the pictures for the optical condition. A full technical inspection under process conditions has not been carried out. Scope of delivery: - LAUDA Integral XT 1590 WS - incl. control unit - Delivery contents as pictured Dimensions & weight: Dimensions (manufacturer’s data): Approx. 700 x 550 x 1600 mm (W x D x H) Weight (manufacturer’s data): Approx. 280 kg Notes: Inspection by appointment possible. Loading and collection by prior arrangement possible. Commissioning, maintenance, and electrical connection must be performed exclusively by qualified personnel. Commercial sale – sold as is, without warranty. Subject to change and error.

Gamybos metai: 2019, būklė: naudotas, Used machine Year of manufacture: 2019 One print bed in the format of 2500 x 1300 mm or 2500 x 3100 mm (Model 2531) High speed: Prints up to 25 m²/h or up to eight sheets/h (4C color configuration) in 2440 x 1220 mm format and up to approx. 12.5 m²/h (4C+W color configuration) with simultaneous white printing New ink supply system: The 1-liter ink bottles can be easily replaced from the front – refilling is much faster! Easy operation – no alignment issues: Equipped with locating pins and a printed measuring scale for precise positioning of media on the print table. The registration pins secure the media and prevent slipping. Thanks to the measuring scale, layout and RIP data can be easily adapted to the position More flexibility with direct printing on thick materials: Prints on boards up to 50 mm high Reduced banding thanks to the Mimaki Advance Pass System Special Mimaki circulation system prevents white ink sedimentation Mimaki Clear Control (MCC): For glossy finishes – to prevent dust adhesion and air bubble formation, MCC simultaneously reduces ink drying time and UV light exposure. This creates both shiny and stylish matte surfaces. Multiple clear varnish layers can be used to create embossed, multi-dimensional effects Convenient ink selection: - LH-100, hard UV inks for all smooth surfaces with high scratch resistance, color brilliance, and solvent resistance - LUS-150, flexible UV inks for smooth and uneven surfaces, approx. 150% stretchable, suitable for various substrates - White ink for image backing reduces light show-through - Two-layer printing with white on clear and colored surfaces - Print finishing with glossy or matte varnish Eco-friendly printing: No release of harmful substances thanks to UV printing technology. Lower power consumption and longer service life thanks to UV-LED lamps RasterLink 6 - Powerful RIP supports excellent color reproduction - Different print jobs can be easily nested - Simple and user-friendly operation - Self-explanatory icons help you find your way quickly - Related RIP settings are grouped in one window and can be saved as favorites for recurring use - The printing process is monitored directly in the main window - Software can be updated online at any time; profiles can be downloaded or updated. Printing process: Piezo inkjet Print heads: 2 staggered heads Max. print format (W x L): 2500 × 1300 mm Max. material format (W x L): 2500 × 1300 mm Max. material thickness: 50 mm Max. material weight: 50 kg (with even weight distribution) Print resolutions: 300, 450, 600, 900, 1200 dpi Media hold-down: Vacuum Fpsdpfxoy Nugqs Af Ajg Number of vacuum zones: 2 sections (along the X-axis) Accuracy: Absolute ±0.3 mm or ±0.3% of the specified distance (whichever is greater) Repeatability: ±0