Evv Pneumatinis Įrenginys Buitinio Suvirinimo Darbams pirkti naudotą (33 813)

Gamybos metai: 2015, būklė: naudotas, Funkcionalumas: visiškai funkcionalus, The Sv‑63P pneumatic butt welding machine features a robust vertical frame design incorporating vertical clamping jaws and a sliding movable platen. Clamping is performed via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable carriages connected to a horizontal cylinder for pressing the workpiece together. The carriage travel is limited in both directions—for both pressing and opening—and the clamping jaw distance can be adjusted according to the cross-section or diameter of the workpiece. Clamping with a preset jaw distance is actuated by foot switches. An additional control cabinet with switches and push-buttons allows for single or simultaneous clamping and supports both manual and automatic welding modes. After welding, the clamping jaws are lifted and the carriages return to their initial position. Welding parameters are set via a controller mounted on the side of the machine. Welding voltage regulation is achieved using thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws through laminated conductors. Inside the machine, a power board with a thyristor and a main control board ensure smooth operation. An air preparation unit with a pressure regulator for setting the clamping force is located on the machine cover. The main switch to activate the unit is located on the controller for setting welding parameters. Gijdpfjyqr Sxex Ap Iou

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, veikimo valandos: 50 h, Lazerinis suvirinimo aparatas su 200 vatų lazerio galia - Lempa pumpuojamas - Taškinis suvirinimo aparatas smulkiems suvirinimo darbams - Tinka juvelyrikai, optikai, tiksliosios mechanikos pramonei ir kt. - Suvirinimo taško dydis nuo 0,1 iki 3 mm - Tinka beveik visiems metalams (plienas, nerūdijantis plienas, sidabras, auksas, titanas ir kt.) - Įskaitant optinį mikroskopą (10x) - Papildomai CCD mikroskopas su tinkleliu - Srovė, impulso trukmė, pasikartojimo dažnis ir dažnis reguliuojami valdymo pulte - Įskaitant apsauginės dujos prijungimą - Nd3+:YAG lazeris (metalinė ertmė su ksenonine blykstės lempa) - Lempa pumpuojamas Nd:YAG lazeris su 200 W galingumu - Išorinė aušinimo sistema - 230 V / 32 A elektros jungtis Giedoflrniepfx Ap Ieu Taip pat atkreipkite dėmesį į mūsų patrauklius lizingo/finansinės nuomos pasiūlymus. Apytiksliai matmenys: Plotis: 60 cm Aukštis: 120 cm Gylis: 110 cm Svoris: apie 150 kg

Būklė: geras (naudotas), Gamybos metai: 2015, 1 naudotas apsauginių dujų suvirinimo aparatas Daihen /OTC M 380-S Pagaminimo metai 2015 Srovės stipris 30-380A Suvirinimo galia prie 100 % ED 270A Suvirinimo viela 0,8-1,6 mm Paduodama 0,1-22 m/min Su 4 volelių vielos padavimas su enkoderio valdymu Gedpfoxnqnxjx Ap Ioiu

Būklė: geras (naudotas), 1 MIG/MAG suvirinimo aparatas Gamintojas: Merkle Tipas: MobiMIG 320 K Techniniai duomenys: Maitinimo įtampa: 3 x 400 V Reguliavimo diapazonas: 25–320 amperų Darbo ciklas: 40 % ED prie 300 amperų 60 % ED prie 270 amperų 100 % ED prie 240 amperų Srovės reguliavimas: bepakopis Aušinimas: inverteris su integruotu ventiliatoriumi Degiklis: aušinamas dujomis Godpfx Apsxpf N Tj Ioiu Paskirtis: nešiojama surinkimo stotelė Vielos padavimo pavara: 4 ritinėlių pavara DV 26 Saugiklis: 16 amperų Matmenys: 600 x 300 x 565 mm

Būklė: naudotas, 1 vnt. MIG/MAG apsauginių dujų suvirinimo ir litavimo įrenginys GYS T3GYS AUTO su įvairiais priedais Spalva: kaip pavaizduota, pagal nuotraukas ir apžiūrą Būklė: naudotas Prekės sandėliavimo vieta: 1 sandėlis Mokėjimo būdas: išankstinis apmokėjimas bankiniu pavedimu Pristatymas: tik atsiėmimas vietoje Hofgeismar Gedpozcmazefx Ap Ioiu

Būklė: naujas, Gamybos metai: 2026, CORMAK OS2400 is a mobile welding fume extractor designed for the effective removal of fumes and exhaust gases directly at the source. The unit combines high suction power with a large airflow, and thanks to a sound-insulated fan chamber, operates with minimal noise. Additional advantages include an integrated pneumatic filter cleaning system, airflow adjustment at the suction nozzle, and robust, industrial-grade construction. Automatic Filter Cleaning – Consistent Performance Gisdpfx Ajyguclep Isu CORMAK OS2400 prioritizes user convenience and stable performance over time. That’s why it features an automatic pneumatic filter cleaning system. In practice, this means the filter is regularly pulsed to remove accumulated contaminants without the need for frequent manual intervention. This delivers a dual benefit: first, the extractor maintains a constant performance level; second, you reduce maintenance downtime and operating costs. In a production environment, this is vital, as any unplanned downtime or loss of suction affects workflow and workplace conditions. Adjustable Extraction Power Adapted to Operation Another advantage is the ability to adjust the smoke and fume flow at the suction nozzle. This feature allows you to match the extraction strength to actual requirements: different for short spot welds, continuous welding, or grinding operations. Adjustment at the nozzle provides quick, operator-specific settings without time-consuming configuration changes. This makes it easier to balance extraction efficiency and operator comfort (e.g., for smaller parts, where excessive suction could hinder manipulation). Durable Construction and Mobility The OS2400 is built for daily industrial use, with a strong emphasis on build quality. The solid construction excels in workshop and industrial settings—where devices are relocated, run for extended periods, and must withstand heavy-duty usage. Mobility makes it easy to use the extractor at different workstations without investing in a full-scale central installation. This is a practical solution both for businesses with a few workstations and those that frequently rearrange their workshop layout or handle diverse projects. Wide Range of Applications In practice, the OS2400 is suitable wherever air pollution is generated: welding (MIG/MAG, TIG), metalworking, grinding, and other processes producing dust and fumes. Its purpose is to improve working conditions by reducing contaminant levels in the operator’s breathing zone. This enhances workforce health, comfort, and demonstrates the company’s commitment to a modern and safe workplace. Technical Specifications Type Airflow (m3/h) Pressure (Pa) Filter Efficiency (%) Power (kW) Voltage (V) Weight (kg) OS2400 2400 2000 99.9 2.2 400 80 OS3500 3500 2000 99.9 3.0 400 122 *Please note: The set does not include a power cable or plug due to the varied connection infrastructure and client requirements.

Būklė: naujas, Gamybos metai: 2026, CORMAK OS3500 is a mobile welding fume extractor designed for efficient removal of fumes and exhaust gases directly at the source. The unit combines strong suction power with high airflow, and thanks to its sound-insulated fan chamber, it operates quietly and smoothly. Gjdpfx Asygt Utep Ioiu Additional advantages include the integrated pneumatic filter cleaning system, airflow adjustment at the extraction inlet, and robust, industrial-grade construction. Automatic filter cleaning – consistent performance The CORMAK OS3500 also emphasizes user convenience and stable performance over time. For this reason, it features an automatic pneumatic filter cleaning system. In practice, this means the filter is regularly 'pulsed' clean of accumulated contaminants without the need for frequent manual intervention. The benefits are twofold: firstly, the extractor maintains a consistent level of efficiency; secondly, you reduce maintenance downtime and operating costs. In a production environment, this is highly significant, as unplanned downtime or loss of suction directly impact workflow and workplace conditions. Adjustable extraction power matched to operations Another advantage is the ability to adjust fume and exhaust flow at the extraction inlet. This feature allows you to tailor extraction power to actual needs—less for short spot welds, more for continuous long welding, or for grinding operations. Adjustment directly at the extraction point enables quick, operator-friendly settings without time-consuming configuration changes. This makes it easier to maintain a balance between effective extraction and work comfort (for example, when working with small details where excessive suction could hinder manipulation). Robust design and mobility The OS3500 is built for daily use, so high-quality workmanship is a priority. The solid construction ensures reliable operation in workshop and industrial settings—where equipment is frequently moved, works long hours, and must endure intensive operation. Mobility allows the extractor to be easily used across various workstations without the need for a fixed installation throughout the facility. This practical solution is ideal for companies with several workstations, as well as those that often change workflows or handle varied projects. Wide range of applications In practice, the OS3500 is suitable wherever air contaminants are generated: welding (MIG/MAG, TIG), metalworking, grinding, and other dust- and fume-generating processes. Its primary function is to improve working conditions by reducing airborne contaminants in the operator's breathing zone. This solution benefits team health, work comfort, and positively influences the perception of your facility as a modern and safe workplace. Technical specifications Type Airflow (m3/h) Pressure (Pa) Filter Efficiency (%) Power (kW) Voltage (V) Weight (kg) OS2400 2400 2000 99.9 2.2 400 80 OS3500 3500 2000 99.9 3.0 400 122 *The set does not include a power cable or plug, as connection infrastructure and customer requirements may vary.

Būklė: geras (naudotas), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, bendras aukštis: 1 200 mm, bendras plotis: 790 mm, bendras ilgis: 1 200 mm, įėjimo įtampa: 380 V, įžeminimo kabelio ilgis: 3 000 mm, bendras svoris: 205 kg, garantijos trukmė: 12 mėnesiai, aušinimo tipas: vanduo, žarnų paketo ilgis: 5 000 mm, įėjimo srovė: 16 A, lazerio galia: 2 000 W, lazerio bangos ilgis: 1 080 nm, Įranga: Tipinė plokštelė prieinama, dokumentacija / vadovas, Handheld Laser Welding Machine AIRTECH 2kW – Top Technology for Efficient Sheet Metal Welding Demonstration Unit – Excellent Condition Discover the smart and high-performance solution for precise laser welding: the Airtech handheld laser welding system with 2,000 watts of power! Perfectly suited for demanding sheet metal processing – efficient, safe, and highly versatile. Highlights and Features: - Power: 2,000 watts for superior welding quality and speed - Laser wavelength: 1080 nm, continuous operation mode with modulation frequency up to 20 kHz - Handheld laser welding head – optimally designed for comfortable use - Robust housing, intelligent internal structure for maximum service life - Touchscreen display for intuitive operation - Automatic multi-function wire feeder available - Safety features: Three-color alarm, safety interlocks, protection mechanism against operator errors - Cooling by separate water circuit with 13-liter tank capacity - CE-certified components in compliance with European standards Your Benefits: - Safe operation thanks to comprehensive safety mechanisms and alarm systems - Flexible application options, including automatic wire feed and robot integration Gjdjn Sl Dbepfx Ap Ioiu - Low operating costs and easy maintenance thanks to sophisticated engineering and durable components For further information or a consultation, the Airtech team is at your service!

Būklė: labai geros būklės (naudotas), Note: The images are for illustrative purposes to show the material. - The workbench frames are picked and packed unassembled; - The production time is generally approx. 3 to 5 working days. Basic dimensions: Width: approx. 5,950 mm Height: approx. 940 mm Depth: approx. 850 mm Scope of delivery includes: 04x square tubes, used Material finish: Sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drilling hole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profiles, used Material finish: Sendzimir galvanized CS-Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 5,650 mm 02x CS Sigma profiles, used Material finish: Sendzimir galvanized CS-Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 5,950 mm Chipboard depth: approx. 850 mm Surface: possibly coated (may be two-piece) 08x mounting brackets, new Version: Sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (D x W x H) Hole spacing outer: approx. 250 mm Hole spacing inner: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm Self-tapping screws, new Version: galvanized Dimensions: 6.3 x 70 mm 32x bolts: M12 32x nuts: M12 32x washers: M12 Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Gjdpfx Apotk Ikme Isiu General information about the item: This item is only offered for collection. Any requested delivery or shipping of this item is subject to additional charges. These can be individually inquired with us depending on the place of delivery and scope of supply.

Būklė: labai geros būklės (naudotas), Note: The images are for illustrative purposes of the material. - The workbench frames are picked unassembled. - Production time is typically approx. 3 - 5 working days. Basic dimensions: Width: approx. 3,300 mm Height: approx. 940 mm Depth: approx. 850 mm Scope of delivery includes: 04x Square tube, used Material finish: Sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Hole grid: 75 x 50 mm Hole Ø: 13 mm 02x CS Sigma profile, used Material finish: Sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 3,000 mm 02x CS Sigma profile, used Material finish: Sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x Chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 3,300 mm Chipboard depth: approx. 850 mm Surface: possibly coated Gisdjtk Irkepfx Ap Isu (possibly two-part) 08x Mounting brackets, new Design: Sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (D x W x H) Hole spacing outer: approx. 250 mm Hole spacing inner: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm Self-tapping screws, new Design: galvanized Dimensions: 6.3 x 70 mm 32x Bolts: M12 32x Nuts: M12 32x Washers: M12 Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any requested transport or shipment of this item is associated with additional costs, which can be inquired from us separately depending on the delivery location and scope.

Būklė: geras (naudotas), Note: The images are for illustrative purposes of the material. - The workbench frames are picked (prepared) unassembled. - The production time is generally approx. 3–5 working days. Basic dimensions: Width: approx. 1,250 mm Depth: approx. 700 mm Height: approx. 940 mm Scope of delivery includes: 04x square tube, used Material finish: Sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole grid: 75 x 50 mm Drill hole diameter: 13 mm 02x CS Sigma profile, used Material finish: Sendzimir galvanized CS Sigma profile: approx. 300 x 75 x 20 mm Profile length: approx. 970 mm 02x CS Sigma profile, used Material finish: Sendzimir galvanized CS Sigma profile: approx. 300 x 75 x 20 mm Profile length: approx. 420 mm 01x chipboard, used Chipboard thickness: 38 mm Width: 1,250 mm Depth: approx. 700 mm Surface: possibly coated (possibly two-piece) Giedpfswgicbex Ap Isu 06x self-tapping screws, new Type: galvanized Dimensions: 6.3 x 70 mm 16x screws: M12 16x nuts: M12 16x washers: M12 Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. If transport or shipping of this item is required, this will incur additional costs which can be inquired about separately depending on the delivery location and scope.

Būklė: labai geros būklės (naudotas), Note: The images are for illustrative purposes regarding the material. - The workbench frames are shipped unassembled; - The production time is usually approximately 3 – 5 working days. Basic dimensions: Width: approx. 3,200 mm Height: approx. 940 mm Depth: approx. 850 mm Scope of delivery includes: Gsdotk Iwaopfx Ap Ieiu 04x Square tubes, used Material finish: Sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drilling pattern: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profiles, used Material finish: Sendzimir galvanized CS-Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 2,900 mm 02x CS Sigma profiles, used Material finish: Sendzimir galvanized CS-Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x Chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 3,000 mm Chipboard depth: approx. 850 mm Surface: possibly coated (possibly two-piece) 08x Mounting brackets, new Version: Sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (D x W x H) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm Self-tapping screws, new Version: galvanized Dimensions: 6.3 x 70 mm 32x Bolts: M12 32x Nuts: M12 32x Washers: M12 Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any desired transport or shipping of this item must be requested separately and entails additional costs, which can be specified depending on the place of delivery and scope of supply.

Būklė: labai geros būklės (naudotas), Note: The images are for illustrative purposes to clarify the material. - The workbench frames are picked and shipped unassembled. - The production time is generally approx. 3 – 5 working days. Basic dimensions: Width: approx. 2,000 mm Height: approx. 940 mm Depth: approx. 850 mm Scope of delivery includes: 04x square tubes, used Material colour: Sendzimir galvanised Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Hole grid: 75 x 50 mm Hole diameter: 13 mm 02x CS Sigma profile, used Material colour: Sendzimir galvanised CS-Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 1,700 mm 02x CS Sigma profile, used Material colour: Sendzimir galvanised CS-Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard panel, used Chipboard thickness: 38 mm Chipboard width: approx. 2,000 mm Chipboard depth: approx. 850 mm Surface: possibly coated (possibly two-part) 08x mounting brackets, new Design: Sendzimir galvanised Dimensions: approx. 140 x 275 x 105 mm (D x W x H) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm Godpertqm Dsfx Ap Isiu 06x self-drilling screws, new Design: galvanised Dimensions: 6.3 x 70 mm 32x bolts: M12 32x nuts: M12 32x washers: M12 Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the article: This item is only available for collection. Any additional transport or shipment of this item is subject to extra charges, which can be provided separately upon request depending on the delivery location and scope of delivery.

Būklė: labai geros būklės (naudotas), Note: The images are for material illustration purposes only. - The workbench frames are picked unassembled; - The typical production time is approximately 3 - 5 working days. Basic dimensions: Width: approx. 2,750 mm Height: approx. 940 mm Depth: approx. 850 mm Included in delivery: 04x square tubes, used Material finish: Sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Hole grid: 75 x 50 mm Hole diameter: 13 mm 02x CS Sigma profile, used Material finish: Sendzimir galvanized CS-Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 2,450 mm 02x CS Sigma profile, used Material finish: Sendzimir galvanized Gjdjtk Iwpjpfx Ap Ioiu CS-Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard panel, used Chipboard thickness: 38 mm Chipboard width: approx. 2,750 mm Chipboard depth: approx. 850 mm Surface: possibly coated (possibly two-part) 08x mounting brackets, new Finish: Sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (D x W x H) Hole spacing outer: approx. 250 mm Hole spacing inner: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm Self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 32x bolts: M12 32x nuts: M12 32x washers: M12 Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information regarding the item: This item is offered for pick-up only. Any transport or shipping of this item beyond this is subject to additional costs, which can be requested from us separately depending on the delivery location and scope.

Būklė: geras (naudotas), Welding Jig, Welding Robot Gijdpsb A Hrljfx Ap Iju - Welding jig: for plates to be welded at an angle - with: adjustable travel path (limit switches) - pneumatic: material clamping (angle) - welding speed: adjustable - without: shielding gas welding unit

Būklė: naujas, Gamybos metai: 2023, OKIO 2000W Automatic 4-Axis Fiber Laser Welding Machine Power: 2 kW Country of origin: China Number of axes: 4 Travel range on X-axis: 500 mm Travel range on Y-axis: 300 mm Travel range on Z-axis: 300 mm Worktable dimensions: 350 mm × 450 mm Travel speeds: Y-axis: 10 m/min X-axis: 10 m/min Z-axis: 5 m/min Positioning accuracy: ±0.02 mm 4th axis: Positioner Gisdpopq Nzasfx Ap Ieu Rotational positioning accuracy: ≤0.05 mm Power supply: 220 V/380 V Power requirement: 7.5 kW Machine dimensions: 500×1400×1900 mm Weight: 280 kg Chiller Welding source: MAX Mounting plate, Welding head Visual CCD monitoring system – utilizes a high-resolution camera and monitor to enhance welding efficiency and quality The automatic OKIO laser welding machine enables welding of metal components along straight lines, circles, and any arbitrary paths, such as for mobile phone cases, batteries, sensors, medical devices, and various other industries. Laser welding machines use high-energy pulsed lasers to weld parts. Their high energy and high laser pulse density ensure smooth weld seams, minimal weld width, and a small heat-affected zone.

Būklė: geras (naudotas), Suvirinimo sukamasis įtaisas, sukamasis-pakreipimo stalas, talpyklų sukamasis įtaisas, suvirinimo sukamasis įrenginys, suvirinimo sukamasis įtaisas, suvirinimo įtaisas, suvirinimo sukamasis stalas, sukamasis-pakreipimo suvirinimo stalas, suvirinimo sukamasis įtaisas - Tryjų žandikaulių griebtuvai: Ø 200 mm - Sukimosi greitis: nuo 1/8 iki 2 1/4 aps./min. Gsdef Nb Dwepfx Ap Ieiu - Sukimosi kryptis: dešinė/kairė - Centrinio taško aukštis: 535 mm - Matmenys: 925/1100/A700 mm - Svoris: 188 kg

Būklė: beveik kaip naujas (parodų įrenginys), Fronius TPS 2700 Pulse Unit Ready to Weld ---> Scope of Delivery: ➤ Fronius TPS 2700 Power Source (270A TRANS PULSE SYNERGIC) Giodsvl D Idspfx Ap Ieu ➤ Fronius torch package with display on the torch handle (arc, ampere jobs etc. adjustable directly from the torch) ➤ Ground cable 3-4m ➤ New Messer pressure regulator ➤ Gas hose ➤ 15kg spool adapter ►►► Perfect for Mobile Use This device is ideal for quick and mobile applications. Easily fits in a car and can be taken almost anywhere—without compromising weld quality. Of course, also suitable for stationary use. Frequently Asked Questions: ----- How old is the machine? Our customers typically rotate their equipment after 3-5 years, sometimes more, sometimes less. What is the condition and does the machine work flawlessly? Yes! Everything works as it should! All machines are disassembled, cleaned, worn parts replaced, reassembled, and tested by us. The equipment is clean—no machines here that look totally worn out! Excellent condition! Only minimal signs of use. All pictures are original photos of our equipment. Sample images. We do not have any displays with burn-in marks. Can I negotiate the price with you? If you are purchasing multiple machines, we can discuss the price. Is shipping possible? Yes, shipping is available. The unit is securely packed on a pallet and shipped insured via our freight forwarder. Can I view the machines in person? We operate an online business, but you are welcome to visit us to collect a machine, and of course, you can test it before payment. We do not have fixed opening hours; everything is by appointment. All machines are assembled to customer specifications and delivered after payment is received—this is our standard procedure. Do you offer a warranty? No, we do not provide a warranty. We offer as-new, affordable professional welding equipment for typically 1/4 to 1/2 of the new price. For the difference compared to a new unit, you could buy two more from us, or invest the savings in maintaining this or several machines for many years to come. For example, the Fronius TPS 2700, as listed here, costs roughly €8,500 new. We offer it for less than 1/3 of the new price. All prices are base prices; you can configure the devices according to your needs. Robot or manual version. Long or short connection hose packages. Various torch packages available. Synchropulse. 270, 400 or 500 ampere units in stock. CMT version available for manual or robotic use. Best to give us a call: Discuss your application, and we will provide an initial price estimate.

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, keliamoji galia: 30 000 kg, Įranga: kojinis nuotolinio valdymo pultas, 30 tons load capacity, self-centering, brand new 380V Hand and foot remote control Rotation speed: 100 – 1000 mm/min Gjdjwrpfgepfx Ap Isiu Diameter range: 600 – 4500 mm Drive wheel diameter: 350 mm x width 180 mm Material: heat-resistant, non-slip PU Dimensions: 2350 x 1460 x 1050 mm Dual drive, synchronized

Būklė: naujas, keliamoji galia: 10 000 kg, Stulpinis kėlimo ir sukimo įrenginys, 10 tonų keliamoji galia, komplekte arba atskirai 2 pavaros pusės Įrenginys siūlomas kaip sinchroninis komplektas arba atskirai Protec apvertimo / pozicionavimo įrenginys Syncrolift Dvigubas stulpas, belaidis ir rankinis nuotolinis valdymas Stulpų reguliavimas 2 kartus elektrinis Keliamoji galia 10 000 kg, 360° Mažiausias darbinis aukštis: 800 mm Gsdpjwtq Dtsfx Ap Ioiu Didžiausias darbinis aukštis: 1700 mm Greičio greitis: 0,5 aps./min. Spaudimo plokštės skersmuo: 900 mm Sukimosi pavara: 2 x 2,2 kW Sukimo momentas: 18 950 Nm Įrenginys taip pat siūlomas kaip mono modelis (pigiau) Pageidaujant su jungiamąja flanšu (kardano flanšu).

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, keliamoji galia: 10 000 kg, Special price: 6 months used, as new with warranty. Self-centering complete set, double drive, synchronized operation. Includes handheld remote control with digital display and foot pedal. Suitable for diameters from 300 mm to 3500 mm. Drive roller diameter: 300 mm. Dimensions: Length: 1900 mm x Width: 470 mm x Height: 390 mm. Infinitely variable speed: 200 – 1200 mm/min. Motor: AC 380 V. Giedpfxsw D Rhae Ap Ieu

Būklė: beveik kaip naujas (parodų įrenginys), Rotator for containers, welding positioner, welding turning table, roller stand Load capacity: 3,000 kg With foot remote control Continuously adjustable speed: 80 to 1,600 mm/min Workpiece diameter: 40 mm to 1,400 mm Roller diameter: 200 mm Dimensions (L x W x H): 800 x 370 x 450 mm Gisdpsd An Aasfx Ap Iou Model or color variations possible

Būklė: naujas, Gamybos metai: 2025, keliamoji galia: 500 kg, 3-axis rotary and tilting positioners with load capacities of 500, 1000, 2000, and 3000 kg. Clamping plate diameters: 0.5, 0.65, 0.8, and 1.0 meters. HDL 500: Minimum height: 1000 mm Maximum height: 1500 mm Clamping plate diameter: 500 mm Radius: 800 mm (boom) Rotational speed: 0.1 – 1 rpm These positioners have proven themselves in the construction and agricultural machinery sectors, commercial vehicles, industrial trucks, as well as in the aerospace and energy industries. Designed for welding, assembly, machining, etc. Their sturdy and robust design, combined with flexible three-axis positioning (including overhead positioning) and easy operation, simplifies welding, assembly, and handling of large workpieces. - Faster production and increased productivity - Optimal workpiece positioning improves weld quality and allows for higher deposition rates - Enhanced safety by significantly reducing dangerous crane handling - Positioning along up to three axes simultaneously without complicated re-clamping - User-friendly operation and ergonomic design protect and relieve operators - Flexible thanks to modular adaptability and customer-specific special versions available Basic principle: Giedpfxjulaxbj Ap Isu With the swivel arm rotational axis located above the clamping plate, the arm acts as a counterweight to the workpiece. This makes the machines significantly more powerful than rotary-tilting tables or rotary-tilting positioners. This principle enables handling of the specified loads in any position. Thanks to the endless rotation of both rotational axes and the additional height adjustment, any workpiece position, including overhead, is possible. Turntable speed is infinitely variable from 0.1 to 1.0 rpm (from 2000 kg capacity: 0.05 to 0.6 rpm). With wireless hand-held remote control Rotation range: 360° endless Swivel range: 360° endless Lift: 1000 – 1500 mm, from 2 tons load capacity: 1250 – 2000 mm Boom reach: up to 1 meter for up to 1000 kg, and 1.5 meters from 2000 kg onwards.

Būklė: naujas, Gamybos metai: 2025, keliamoji galia: 10 000 kg, Self-centering complete set, dual drive, synchronous with hand remote control with digital display and foot remote control Diameter range from 300mm to 3500mm Drive roller diameter: 300mm x 120mm Dimensions: Length: 1900mm x Width: 470mm x Height: 390mm Continuously variable speed: 100 - 1200 mm/min Motor: AC 380 V Gijdpfx Aov En D Nop Iju Load capacity: 10 t Total power demand: 1.1 kW Self-aligning for multiple diameters Continuously adjustable drive unit speed Polyurethane-coated drive rollers, heat resistant Optimal load distribution (4 rollers/unit), especially gentle for workpieces with thin walls and sensitive surfaces Remote control via cable and dual foot pedal CE certification

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2006, 2000 kg load capacity Gedshwv R Djpfx Ap Isiu Self-supporting, braked rotary device for fixture construction, toolmaking For assembly, welding, painting, etc. With foot remote control Switchable right / left rotation With mounting stand for approx. 1000 mm height increase Machine is technically as new, almost unused Dimensions: Height to center of axis: 850 mm More machines of this design in various sizes are in stock. Load capacities from 500 kg to 5000 kg.