Pneumatinis įrenginys buitinio suvirinimo darbams

EVV SV-63P

The Sv‑63P pneumatic butt welding machine features a robust vertical frame design incorporating vertical clamping jaws and a sliding movable platen. Clamping is performed via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable carriages connected to a horizontal cylinder for pressing the workpiece together. The carriage travel is limited in both directions—for both pressing and opening—and the clamping jaw distance can be adjusted according to the cross-section or diameter of the workpiece. Clamping with a preset jaw distance is actuated by foot switches. An additional control cabinet with switches and push-buttons allows for single or simultaneous clamping and supports both manual and automatic welding modes. After welding, the clamping jaws are lifted and the carriages return to their initial position. Welding parameters are set via a controller mounted on the side of the machine. Welding voltage regulation is achieved using thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws through laminated conductors. Inside the machine, a power board with a thyristor and a main control board ensure smooth operation. An air preparation unit with a pressure regulator for setting the clamping force is located on the machine cover. The main switch to activate the unit is located on the controller for setting welding parameters.
Blodpfx Aaeyqr Sxohed

Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.