Eubama Rotacinė Perkėlimo Mašina pirkti naudotą (40 400)

Būklė: paruoštas naudoti (naudotas), Two identical Eubama rotary transfer machines, including filtration systems, are available. Workpiece diameter: 60 mm, workpiece length: 320 mm, clamping stations: 10, cycle rate: 20/min, spindle stroke: 100 mm, drilling capacity in steel/brass: 20 mm / 30 mm, thread cutting capacity in steel/brass: M30 / M40. Documentation is available. An on-site inspection is possible. Dkjdpfew Hglmjx Ag Iet

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61062, strypo praėjimas: 24 mm, TECHNICAL DETAILS Spindle bore: 24 mm Bar feeder Model: IEMCA PRA52 F33 Year of manufacture: 2004 Maximum bar length: 3300 mm Maximum bar diameter: 9.1 mm Control unit: Siemens S7-200 Drive for parting-off unit Stroke per slide: 7.15 mm Actuation angle: 26.565° Face turning chuck PKD 80 MACHINE DETAILS Operating voltage: 230 / 400V Frequency: 50 Hz EQUIPMENT Nordmann tool monitoring with touchscreen tool monitor Chip conveyor (Knoll 500 K-1/450, year of manufacture 2004) Oil filtration system (Knoll FKA 150) Scraper-belt conveyor with coolant system High-pressure unit FKA / 250 Tubes with coolant connections Hydraulic unit Central lubrication Hydraulic circuit diagram and accessories Pressure booster HC3 - 4.0 - B Deflection plate T-T Pneumatic accessories (for 4 cylinders) Compressed air maintenance unit DA 300 Chuck plate for jaw chuck TK420 Oil distributor 2-jaw chuck (Röhm, ID no. 431074, stroke 4.25 mm) Cut-off saw with gear drive Clamping flange (diameter: 100 mm) Spindle unit complete with toothed belt drive Coolant supply Cover plates for void stations Material stop (60 mm stroke) Parting unit extended by 35 mm Z-axis measuring system Spindle unit with hydraulic NC-axis Device for flushing out clamping jaws Change parts for material clamping Dkodpfjyx Ia Njx Ag Ijt Stops for hydraulic unit carrier Change parts for bar loader magazine Tools Tool holders Additional clamping with collet chuck Further details about the machine can be found in the attached documents.

Gamybos metai: 2015, būklė: paruoštas naudoti (naudotas), Max. workpiece diameter: 42 mm, connected load: 132 kVA, length: 4600 mm, width: 7500 mm, height: 3000 mm, equipped with bar feeder. Dkodpfx Agjp S Sq Ds Ist

Būklė: naudotas, Gamybos metai: 2013, valdiklių gamintojas: Siemens, valdiklio modelis: 840 D, Description: Rotary Indexing Table/Spindles: Clamping Stations: 12 motor spindles Drive: Torque drive, water-cooled Measuring system: Direct Dsdpfx Agozvt Ike Iskt Indexing time: 1.5 seconds Spindles: Water-cooled motor spindles C-axes: 0.001°, hydraulic clamping Speed: 5,500 rpm Power: 11 kW Clamping device: Chuck Base Modules: Technology: 3-axis positioning module X-axis: 50 mm Y-axis: 100 mm Z-axis: 100 mm Measuring systems: Direct in all axes Coolant supply: Integrated Max. workpiece size: 100 x 100 x 100 mm Station 1: Horizontal: Raw part feeding (pallet conveyor + Stäubli robot) Vertical: Raw part measurement Station 2: Horizontal: 4-position turret, non-driven Vertical: Re-clamping error measurement (C-axis zeroing) Station 3: Horizontal: 4-position turret, non-driven Vertical: Not equipped Station 4: Horizontal: 4-position turret, non-driven Vertical: Not equipped Station 5: Horizontal: 6-position turret with WAN, 10,000 rpm Vertical: 6-position turret with WAN, 10,000 rpm Station 6: Horizontal: 4-position turret, non-driven Vertical: Not equipped Station 7: Horizontal: Not equipped Vertical: 6-position turret with WAN, 10,000 rpm Station 8: Horizontal: 6-position turret with WAN, 10,000 rpm Vertical: Not equipped Station 9: Horizontal: 4-position turret, non-driven Vertical: Not equipped Station 10: Horizontal: 6-position turret with WAN, 10,000 rpm Vertical: Not equipped Station 11: Horizontal: 6-position turret with WAN, 10,000 rpm Vertical: 6-position turret with WAN, 10,000 rpm Station 12: Horizontal: Load/unload unit with double swing gripper & discharge conveyor Equipment / Accessories: Chip management: Chip conveyor High-pressure system: 50 bar Tool monitoring: ARTIS breakage control Raw material feed: Feed belt with robot Finished part discharge: Discharge conveyor with 3-way diverter Oil mist separator: Electrostatic filter Fire extinguishing system: Kraft & Bauer Part marking: Laser Part cleaning: HESO cleaning system

Būklė: naudotas, Gamybos metai: 2011, valdiklių gamintojas: Fanuc, valdiklio modelis: 30i, Aprašymas: Bendra informacija: Pagaminimo metai: 2011 Valdymas: Fanuc 30i Maks. stalo apkrova: 100 kg Eigos X/Y/Z: 300/300/370 mm Įrenginio svoris: apie 33 000 kg I apdirbimo stotis (X/Y/Z/B): Technologija: 1 x vertikali ašis (vertikalusis velenas) Sūkių dažnis: 8 000 aps./min Įrankio tvirtinimas: HSK-A 63 Galia: 31 kW Sukimo momentas: 197 Nm Įrankių keitiklis: 12 stočių B ašis: 0,001°, pneumatinis indeksavimas, spaudimo jėga Įrankio skersmuo / ilgis: 125 / 250 mm II apdirbimo stotis (X/Y/Z/B): Technologija: 1 x vertikali ašis + 1 x horizontali ašis (velenas) Sūkių dažnis: 8 000 aps./min Įrankio tvirtinimas: HSK-A 63 Galia: 31 kW Sukimo momentas: 197 Nm Įrankių keitiklis: 12 stočių B ašis: 0,001°, pneumatinis indeksavimas, spaudimo jėga Įrankio skersmuo / ilgis: 125 / 250 mm III apdirbimo stotis (X/Y/Z/B): Technologija: 1 x vertikali ašis (velenas) Sūkių dažnis: 8 000 aps./min Įrankio tvirtinimas: HSK-A 63 Galia: 31 kW Sukimo momentas: 197 Nm Dedpfxezfu Rfs Ag Iskt Įrankių keitiklis: 12 stočių B ašis: 0,001°, pneumatinis indeksavimas, spaudimo jėga Įrankio skersmuo / ilgis: 125 / 250 mm IV apdirbimo stotis (X/Y/Z/B): Technologija: 1 x vertikali ašis + 1 x horizontali ašis (velenas) Sūkių dažnis: 8 000 aps./min Įrankio tvirtinimas: HSK-A 63 Galia: 31 kW Sukimo momentas: 197 Nm Įrankių keitiklis: 12 stočių B ašis: 0,001°, pneumatinis indeksavimas, spaudimo jėga Įrankio skersmuo / ilgis: 125 / 250 mm Pakrovimo stotis: Kiekis: 2 vnt. (priekyje ir gale) Įranga / priedai: Padėties matavimo sistemos: tiesioginės visose ašyse Drožlių šalinimas: drožlių transporterio sistema Aušinimo skysčio tiekimas: aukšto slėgio instaliacija (IKZ), 30 bar Įrankio lūžio kontrolė: Artis, tipas CTM V5 Nulinio taško įtvirtinimo sistema: Erowa Emulsijos rūko surinktuvas: Reven

Būklė: paruoštas naudoti (naudotas), Length: 8,225 mm, width: 3,200 mm, with documentation. Dedei Ew Dpopfx Ag Iokt

Būklė: paruoštas naudoti (naudotas), A complete CNC rotary transfer machining system from Winema, including interlinking, peripheral equipment, and a washing unit, is available. 1) Winema RV20 Flexmaster rotary transfer machining center, stations: 6, machining positions: 12, max. material passage: 42mm, internal thread 1: M16x1.5, internal thread 2: M20x1.5, drilling: 8.7mm/15mm/17mm/18mm, reaming: 9mm/15mm/18mm, cycle time: approx. 7s, throughput: approx. 500 parts/h, control: Siemens Sinumerik 840D. 2) Winema bar loading magazine, tube support length: 800mm, max. tube wall thickness: 2mm, max. bar length: 3200mm. 3) Knoll coolant filtration system, dirty tank volume: 500l, clean tank volume: 150l, filter fineness: 50μm. 4) Knoll cooling unit, cooling capacity: 15kW, max. oil temperature: 30°C. 5) UAS oil mist extraction system, separation efficiency: 96%-98%. 6) Interlinked continuous flow washing system with automatic part transfer. 7) Hydraulic unit. 8) Conveyor units. 9) Fire extinguishing system. This is a complete and integrated system for NC control valve production. The production of other components may also be possible. Documentation available. On-site inspection possible. Dkedpfx Agszbl N Ss Iet

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2002, Stations: 6, Power: 40 kW, Control: Siemens. Includes upstream Fischer separation head, Festo feeder, material discharge conveyor, Knoll 450K-1 chip conveyor, year of manufacture: 2004, chip processing system with ejection and hydraulic unit. Documentation available. On-site inspection possible. Dkodpfxsu T Rhbe Ag Iet

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1997, A rotary transfer machine for the production of ball sockets is available. Machining stations: 13, bar feeder: 0433, bar feeder length: 3000 mm, machine power: 40 kW, control system: Hydromat. Includes Bosch hydraulic unit, Knoll 450K-1 chip conveyor, Müller CL206-B coolant processing unit, and separate Knoll chip disposal. In 2015, the machine was upgraded for SW milling. Documentation is available. An on-site inspection is possible. Dkodpeu T Rg Rofx Ag Ijt

Būklė: naudotas, TECHNICAL DATA - Number of stations: 12 - Table indexing: 12 x 30 [°] - Collet type: SCHAUBLIN W25 - Max. clamping diameter: 25 [mm] - Max. workpiece length: 100 [mm] - Supply voltage: 3x 400 [V] Dodjuhbwcjpfx Ag Iekt - Installed power: 32 [kW] - Machine dimensions: 2700 x 2700 x 2500 [mm] - Weight: 4000 [kg] EQUIPMENT - CNC control: SIEMENS Sinumerik 805 - Bar loader: HYDROMAT 5.07.018-4, capacity 4200 mm - Station 1: Cut-off - Station 2: Longitudinal drilling 30/60 - Station 3: Longitudinal drilling 30/60 - Station 4: CNC turning, 2 axes - Station 5: Reversal - Station 6: Radial drilling 30/60 - Station 7: CNC turning, 2 axes - Station 8: Angular drilling 30/60 - Station 9: Radial drilling 30/60 - Station 10: Angular drilling 20/50 - Station 11: Radial drilling 20/50 - Station 12: Longitudinal drilling 30/60 - Ejection between station 12 and 1 - Parts conveyor - Chip conveyor: KNOLL 450 K-1/2000 - Coolant tank: KNOLL KTS-25-60-T - High-pressure pump: 40 [bar] - Filtration: KNOLL VRF 500

Būklė: naudotas, TECHNICAL DATA - Number of positions: 16 - Indexing time: 0.7 [s] - Max. bar diameter: 32 [mm] - Collet type: VB 32 - Max. workpiece length: 150 [mm] - Max. number of horizontal units: 16 - Max. number of vertical units: 8 - Max. total number of units: 24 - Electrical supply: 400 [V] - Installed power: 40 [kW] Dedpfjuhbwijx Ag Iekt - Dimensions: 9.8 x 4 x 2.9 [m] - Weight: 6,500 [kg] ACCESSORIES - CNC SIEMENS Sinumerik 805 - HYDROMAT bar loader - 2 CNC turning units, 2 axes - Workpiece conveyor belt - Chip conveyor - Coolant tank - Filtration system

Būklė: naudotas, TECHNICAL DATA - Number of axes: 27 - Number of stations: 12 - Number of machining stations: 9 - Indexing time: 2 [s] MACHINING UNIT - Model: UV151-3 - Number of units: 1 - Travel distance X/Y/Z axes: 110 / 150 / 135 [mm] - Rapid traverse speed: 6,500 [mm/min] - Resolution: 0.001 [mm] MACHINING UNIT - Model: UV50-3 - Number of units: 8 - Travel distance X/Y/Z axes: 40 / 120 / 100 [mm] - Rapid traverse speed: 6,500 [mm/min] - Resolution: 0.001 [mm] SPINDLES - Spindle type: Electrospindle Ø38 * Number of spindles: 14 * Tool holder: ISO10 * Spindle speed: 18,000 [rpm] * Spindle drive power: 0.25 [kW] - Spindle type: Electrospindle Ø38 * Number of spindles: 4 * Tool holder: ISO10 * Spindle speed: 9,000 [rpm] * Spindle drive power: 0.25 [kW] - Spindle type: Electrospindle Ø120 * Number of spindles: 1 * Tool holder: HSK40 * Spindle speed: 8,710 [rpm] * Spindle drive power: 3.8 [kW] - Spindle type: Electrospindle with reduction gearbox Ø38 * Number of spindles: 2 * Tool holder: ISO10 * Spindle speed: 9,000 [rpm] * Spindle drive power: 0.25 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive power: 10 [kW] WEIGHT AND DIMENSIONS Dodpov Rgy Hsfx Ag Iekt - Footprint: 4,600 x 3,600 [mm] - Machine height: 3,200 [mm] - Machine weight: 13,500 [kg] ACCESSORIES - Control: Siemens - Coolant reservoir - Coolant tank * with high-pressure pump - Chip conveyor - Oil mist extraction: ELBARON RON/A 120

Būklė: naudotas, TECHNICAL DATA - Number of axes: 27 - Number of stations: 12 - Number of machining stations: 9 - Indexing time: 2 [s] MACHINING UNIT - Designation: UV151-3 - Number of units: 1 - Travel X/Y/Z axes: 110 / 150 / 100 [mm] - Rapid traverse speed: 6,500 [mm/min] - Resolution: 0.001 [mm] MACHINING UNIT - Designation: UV50-3 - Number of units: 8 - Travel X/Y/Z axes: 40 / 120 / 100 [mm] - Rapid traverse speed: 6,500 [mm/min] - Resolution: 0.001 [mm] SPINDLES - Spindle type: Electrospindle Ø38 * Number of spindles: 14 * Tool holder: ISO10 * Spindle speed: 18,000 [rpm] * Spindle drive power: 0.25 [kW] - Spindle type: Electrospindle Ø38 * Number of spindles: 4 * Tool holder: ISO10 * Spindle speed: 9,000 [rpm] * Spindle drive power: 0.25 [kW] * Spindle type: Electrospindle Ø120 - Number of spindles: 1 - Tool holder: HSK40 * Spindle speed: 8,710 [rpm] * Spindle drive power: 3.8 [kW] * Spindle type: Electrospindle Ø38 - Number of spindles: 2 - Tool holder: ISO10 Djdpfjw Huhcex Ag Iekt * Spindle speed: 9,000 [rpm] * Spindle drive power: 0.25 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive power: 10 [kW] WEIGHT AND DIMENSIONS - Footprint: 4,600 x 3,600 [mm] - Machine height: 3,200 [mm] - Machine weight: 13,500 [kg] ACCESSORIES - Control: Siemens - Coolant container - Coolant tank * with high-pressure pump - Chip conveyor - Oil mist extraction: ELBARON RON/A 120 - Charger - Fire extinguishing device - Positioning

Būklė: naudotas, TECHNICAL DATA - Number of axes: 27 - Number of stations: 12 - Number of machining stations: 9 - Indexing time: 2 [s] MACHINING UNIT - Designation: UV151-3 - Number of units: 1 - Travel X/Y/Z axes: 110 / 150 / 135 [mm] - Rapid traverse speed: 6,500 [mm/min] - Resolution: 0.001 [mm] MACHINING UNIT - Designation: UV50-3 - Number of units: 8 - Travel X/Y/Z axes: 40 / 120 / 100 [mm] - Rapid traverse speed: 6,500 [mm/min] - Resolution: 0.001 [mm] SPINDLES - Spindle type: Electric spindle Ø38 * Number of spindles: 14 * Tool holder: ISO10 * Spindle speed: 18,000 [rpm] * Spindle drive power: 0.25 [kW] - Spindle type: Electric spindle Ø38 * Number of spindles: 4 * Tool holder: ISO10 * Spindle speed: 9,000 [rpm] * Spindle drive power: 0.25 [kW] - Spindle type: Electric spindle Ø120 * Number of spindles: 1 * Tool holder: HSK40 * Spindle speed: 8,710 [rpm] * Spindle drive power: 3.8 [kW] - Spindle type: Electric spindle with reduction gearbox Ø38 * Number of spindles: 2 Djdsv Rgyyepfx Ag Iskt * Tool holder: ISO10 * Spindle speed: 9,000 [rpm] * Spindle drive power: 0.25 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive power: 10 [kW] DIMENSIONS AND WEIGHT - Footprint: 4,600 x 3,600 [mm] - Machine height: 3,200 [mm] - Machine weight: 13,500 [kg] ACCESSORIES - Control system: Siemens - Coolant reservoir - Coolant tank * with high-pressure pump - Chip conveyor - Oil mist extraction unit: ELBARON RON/A 120

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1994, Stations: 24, Substations: 20, Side stations: 20, Axes: 2 per station, Collets: 24, Production output single/double cycle: 120/240 pcs/min, Stroke: 35mm, Max. workpiece diameter: 25mm, Spindle speed: 20,000 rpm, Machine weight: approx. 2,650kg, Control system: Mikron MAC 50, Operating hours: approx. 17,335h. Documentation available. An on-site inspection is possible. Dkodew Emx Repfx Ag Ijt

Būklė: naudotas, TECHNICAL DATA - Number of axes: 48 - Number of stations: 16 - Number of units: - Number of units possible horizontally: 16 - Number of units possible vertically: 7 - Max. diameter: 45 [mm] - Max. workpiece diameter: 150 [mm] - Base unit GM50/150: * Z stroke: 150 [mm] * Spindle power: 5 [kW] * Spindle speed: 0 - 8000 [rpm] - X/Y slides: * X travel: +/- 40 [mm] * Y travel: +/- 20 [mm] - Dimensions: 14,000 x 4,800 x 3,000 [mm] - Weight: 13 [t] - Operating hours: 4,283 [h] ACCESSORIES - CNC control Bosch Rexroth INDRAMOTION MTX-L85 - Station 1: * Sawing unit 52/100, 3 axes - Station 2: * Slide 50/150 (manual adjustment) ref. 22.10.002-1 * Unit 50/150 ref. 22.42.001-6 (1 axis) * IKZ (internal coolant supply) - Station 3: * Slide 50/150 (manual adjustment) ref. 22.10.002-1 * Unit 50/150 ref. 22.42.001-6 (1 axis) * IKZ - Station 4: * Slide 50/150 (manual adjustment) ref. 22.10.002-1 * Unit 50/150 ref. 22.42.001-6 (1 axis) * IKZ - Station 5: * CNC slide 50/150 ref. 22.10.001-4 (2 axes) * CNC unit 50/150 ref. 22.42.001-6 (with CNC turning function) * IKZ - Station 6: * CNC slide 50/150 ref. 22.10.001-4 (2 axes) * CNC unit 50/150 ref. 22.42.001-6 (with CNC turning function) * IKZ - Station 7: * Slide 50/150 manual adjustment ref. 22.10.002.1 * Recessing unit ref. 22.42.041.1 - Station 8: * CNC slide 50/150 ref. 22.10.001.4 (2001) * CNC unit 50/150 ref. 22.42.001.6 (with CNC turning function) - Station 9: * CNC slide 50/150 ref. 22.10.001.4 * Sawing unit ref. 22.42.039.2 - Station 10: * Slide 50/150 manual adjustment ref. 22.10.002.1 * Sawing unit ref. 22.42.039.8 Dodpou N Ivqsfx Ag Ijkt - Station 11: * CNC slide 50/150 ref. 22.10.001.4 * Unit 50/150 ref. 22.42.001.6 (CNC turning function) - Station 12: * Slide 50/150 ref. 22.10.002.1 * Sawing unit ref. 22.42.041.1 - Station 13: * CNC slide 50/150 ref. 22.10.001.4 * Sawing unit ref. 22.42.041.1 - Station 14: * CNC slide 50/150 ref. 22.10.001.4 * CNC unit 50/150 ref. 22.42.001.6 (turning function) - Station 15: * CNC slide 50/150 ref. 22.10.001.4 * CNC unit 50/150 ref. 22.42.001.6 (turning function) * IKZ - Station 16: * CNC slide 50/150 ref. 22.10.001.4 * CNC unit 50/150 ref. 22.42.001.6 (turning function) * IKZ - Bar loading magazine, length 4 meters - Coolant tank KNOLL (2,000 liters) with high-pressure pump HP 60 [bar] - Chip conveyor

Būklė: naudotas, Gamybos metai: 2002, Straipsnis: Apvado ciklinė staklė Gamintojas: Pfiffner Tipas: Hydromat HB-32/45 Dodpfey N Agrjx Ag Iokt Pagaminimo metai: 2002 Dėl daugiau informacijos ir nuotraukų susisiekite su mumis el. paštu (at) arba *

Gamybos metai: 2005, būklė: naudotas, Apvalaus judesio mašina „Kneissler KE 8-180D“, pagaminta 2005 m. Dkjdpoziz Rgjfx Ag Iet

Būklė: naudotas, Description: General: Year of manufacture: 2018 Control: Fanuc Machining stations: 5 units Loading station: 1 unit Travel range: X-axis: 450 mm Y-axis: 500 mm Z-axis: 450 mm Rapid traverse X/Y/Z: 50 m/min Turret: Number of positions: 8 Spindle speed: 13,300 rpm Torque: 58 Nm Tool holder: HSK 63 C Workpiece/fixture: Maximum dimensions: 350 x 350 x 350 mm Maximum permissible mass: 250 kg Media feed: 6 units Dkedpfx Agovr Az Nj Ist NC rotary swiveling table: A-axis: +/- 150° B-axis: 360° Maximum load: 250 kg Table diameter: 320 mm Equipment / Accessories: Loading/unloading: Fanuc Robot M20i-A Chip disposal: 2x chip conveyors Coolant supply: high-pressure system, 20 bar Position measuring systems: Direct in all axes

Būklė: naudotas, Gamybos metai: 2001, Stations: 10 / 22 Tool holder: SK 40 Control: SIEMENS SIMATIC OP 3 Total power requirement: approx. 112 kW = Transfer machine Indexing drum with 10 workpiece stations, 22 machining units (Drilling: 7 units, Drilling & Tapping: 8 units; Drilling & Counterboring: 5 units; Drilling, Counterboring & Tapping: 2 units), Djdpotqqlqjfx Ag Ijkt Each machining unit equipped with SK 40 tool holder, Motor power per unit 4.0 to 4.5 kW, SIEMENS SIMATIC OP 3 control, ABB loading robot Accessories: Collet chuck (without jaws), chip conveyor, coolant system

Būklė: naudotas, Gamybos metai: 1997, Stations: 10 / 22 Tool Holder: SK 40 Control: SIEMENS SIMATIC OP 3 Total Power Requirement: approx. 130 kW = Transfer Machine Dedetqqlrepfx Ag Iskt Rotary indexing drum with 10 workpiece stations, 22 machining units (10 drilling units, 5 drilling and tapping units, 3 drilling and countersinking units, 1 drilling, countersinking and tapping unit, 3 tapping units), Each unit equipped with SK 40 tool holder, motor power per unit between 4.5 and 5.5 kW, Control system: SIEMENS SIMATIC OP 3, Loading robot: ABB Accessories: chuck (without jaws), chip conveyor, coolant system

Gamybos metai: 2013, būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Trepko 222-1K rotacinė pildymo mašina su 2 formomis. Anksčiau naudota jogurto ir kitų pieno produktų pildymui. Forma Nr. 1: skersmuo 185 mm, Nr. 2: 90 mm. Pagaminimo metai: 2013. Dkedeydplcjpfx Ag Ist

Būklė: reikia remonto (naudotas), Funkcionalumas: ribota funkcionalumas, Hugart puodelių pildymo mašina. Naudota 400 g puodelių pakavimui. Dviejų linijų mašina, našumas – 3600 puodelių per valandą. Reikalingas mechaninis ir elektrinis remontas. Galiu parduoti tokią, kokia yra, arba suremontuoti ir pritaikyti reikiamam puodelių formatui. Detales aptarsime. Dkodpfx Aoxz Uiaeg Iot

Būklė: geras (naudotas), „Horizon RD-4055“ – rotacinis štancavimo įrenginys Įrenginys yra puikios būklės, nedidelis jo nuvažiuotas atstumas, ir jis paruoštas darbui. Įrenginio nustatymus galima atlikti per valdymo pultą. Pagaminta Japonijoje. Komplektą sudaro: – FFU-4055 lakštų padavimo įrenginys – RD-4055 rotacinis štancavimo įrenginys su dvigubu magnetiniu cilindru (viršutiniu ir apatiniu) – SPC-4055 separatoriaus įrenginys Dedezur Hpepfx Ag Iekt Gamintojo aprašymas: – Sąnaudų mažinimas dėl galimybės pakartotinai naudoti štampus, – Įrenginio valdymas per „TOUCH & WORK“ jutiklinį ekraną, – Trumpas įrenginio nustatymo laikas, – Didelis tikslumas ir puiki galutinio produkto kokybė, – Labai paprastas ir greitas štampo montavimas ant magnetinio cilindro Techniniai duomenys: – Didžiausias apdorojamo lakšto dydis: 400 x 550 mm – Mažiausias apdorojamo lakšto dydis: 200 x 275 mm – Apdorojama medžiaga: standartinis popierius, dengtas popierius ir kartonas – Medžiagos storis: nuo 188 iki 400 g/m² – Padavimo įrenginio krūvos aukštis: 500 mm – Gamybos greitis: 6 000 ciklų per valandą Fabriko komplektas su įrankiais ir priedais, naudojimo instrukcija.

Būklė: geras (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, MULLER MARTINI CONCEPTA 5 F Ofsetinė spausdinimo rotacinė mašina etikečių ir formų gamybai Gamintojas: Müller Martini AG, Zofingenas, Šveicarija Dkjdpfx Aszk I Unog Iet Pagaminimo metai: 2006 • Spalvų skaičius: 5 • Skaitiklio rodmenys: 66 mln. atspaudų • UV spausdinimas • UV lempa prie kiekvienos spausdinimo galvutės • didžiausias spausdinimo greitis: 365 m/min. • 5 spausdinimo galvutės • 1 perforavimo galvutė • 1 lankstymo galvutė • „Elettra“ tipo FASTWASH • IST UV sistema BLK2 • SCAN 3000 • skersinis pjovimo įrenginys • Prieinama iš karto Pardavimo priežastis: įmonė nutraukia veiklą Techninė būklė: veikianti, būklė ir nusidėvėjimas atitinka amžių, naudojama ne kasdieninėje gamyboje, tačiau galima apžiūrėti pagal susitarimą