Donau Donaumeric 440 pirkti naudotą (2 637)

Būklė: naudotas, Gamybos metai: 2007, Drilling capacity in steel (diameter): 40 mm Throat depth: 1050 mm Spindle speed: 15 – 2800 rpm Feed range: 0.075 – 0.45 mm/min Dimensions (LxWxH): 2450 x 1300 x 2300 mm Weight: 1500 kg Equipment: • Machine in top condition • Serviced and overhauled by factory customer service in 2026 Machine configuration: • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed control • Infinitely variable quill feed via three-phase servomotor • 2 T-slots (18 mm) at the rear of the machine base Chodey Nd T Hjpfx Aa Dsa • 2 T-slots (18 mm) on the left side of the machine base • Thread cutting device • Centralized lubrication • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and travels: Tool holder: SK 40 Column diameter: 195 mm Table size: 1800 x 600 mm Number of T-slots: 4 T-slot spacing: 125 mm Quill stroke (Z-axis): 200 mm Column travel (W-axis): 410 mm Distance spindle nose – table min: 70 mm, max: 680 mm Distance spindle nose – floor min: 970 mm, max: 1580 mm Drilling radius: 540 – 1590 mm Work table height: 900 mm Machining performance: Drilling capacity (full) St 60: Ø 40 mm GG 22: Ø 50 mm Tapping capacity St 60: M36 GG 22: M42 Main spindle drive: AC motor, frequency-controlled, 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Max. torque: 250 Nm Constant torque from 15 – 2000 rpm Feed drives: X-axis – AC servomotor: 0.25 kW Y-axis – AC servomotor: 0.25 kW Z-axis – AC servomotor: 4.50 kW W-axis – AC servomotor: 2.50 kW Rapid traverse speeds (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse speed (W): 3 m/min Infinitely variable feed: 5 – 2000 mm/min Accuracy: Positioning accuracy X-, Y-axis over 1200 mm: ± 0.075 mm Electrical data: Operating voltage/frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit for clamping: 0.75 kW Total connected load: 13.0 kVA Weight Danumeric 440 (without packaging), with table 1800 x 600 mm: 2800 kg CNC Control: Axes: 3 (X, Y, Z) Processor: 32-bit CPU Display: TFT flat screen, backlit, clearly visible from all sides, 215 x 160 mm Position display: Cartesian or polar, absolute or incremental values, unit: mm or inch or degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions according to machining operation, material-dependent cutting data recommendations Tool management capacity: max. 500 tools Subroutine technology: yes Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry functions Zero point detection: Cycles for determining zero points by manual probing of the workpiece for: – arbitrarily clamped rectangular parts – arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle position detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – table surface min. mm 70 / max. mm 680 Cjdpjxn A Spofx Aa Dsha Distance spindle nose – floor min. mm 970 / max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity (solid) St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: rpm 15 – 2800 Torque Nm max. 250 constant between rpm 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds stepless mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, clearly legible from all sides, 215 x 160 mm Positioning information: Cartesian or polar, values absolute or incremental, mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogramming: yes Machining Cycles Standard Software Options: Conversational programming, 38 work offset positions, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable functions for targeted program re-entry Zero point determination: Cycles for determining reference points by manually probing the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Aligning cast and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data Interfaces: USB

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Specification • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming Chjdpfx Aajzrr Uue Dja • Stepless quill feed via three-phase servo motor • 2 x 18 mm T-slots at the rear of the machine base • 2 x 18 mm T-slots on the left side of the machine base • Thread cutting device • Centralized lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travels Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – table top min/max mm 70 / 680 Distance spindle nose – floor min/max mm 970 / 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining capacities Drilling capacity solid material: St 60 Ø 40 mm, GG 22 Ø 50 mm Thread cutting: St 60 M 36, GG 22 M 42 Main spindle drive AC Motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min-1 15 – 2800 Torque: Nm max. 250 (constant between 15 – 2000 min-1) Feed drives X-axis AC servo motor kW 0.25 Y-axis AC servo motor kW 0.25 Z-axis AC servo motor kW 4.50 W-axis AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Stepless feeds: mm/min 5 – 2000 Accuracy Positioning accuracy (X, Y-axis over 1200 mm): mm ± 0.075 Electrical data Operating voltage/frequency: V/Hz 400 / 50 Control voltage: V 24 Hydraulic unit for clamping: kW 0.75 Total connected load: kVA 13.0 Weight Danumeric 440 (without packaging) with 1800 x 600 mm table: kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat screen, backlit, legible from all sides, 215 x 160 mm Position display: kartesian or polar, absolute or incremental values Unit of measure: mm or inch, or degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions based on machining type, material-related cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining cycles Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selectable entry options Reference point determination: Cycles for determining reference points by manual probing of the workpiece for: – arbitrarily clamped rectangular parts – arbitrarily clamped round parts – alignment of cast and flame-cut parts – Angle position detection on round parts by probing reference edges/surfaces Test graphic: Graphic display of drilling patterns

Gamybos metai: 2018, būklė: paruoštas naudoti (naudotas), Parduodama 2018 m. pilnai renovuota CNC radialinė gręžimo staklės. Darbo sritis X/Y: 1050mm/1800mm, gręžimo pajėgumas plienui: 40mm, ketaus: 50mm, sriegimas: M36-M45, įrankio tvirtinimas: SK40, apsisukimų diapazonas: 15 aps./min–2800 aps./min, išilginis pinolės eiga Z: 200mm, kolonos eiga W: 410mm, stalo tvirtinimo paviršius X/Y: 1800mm/600mm, padavimo greitis: 5 mm/min–2000 mm/min, greitasis padavimas X/Y: 7,5 m/min, valdymas: CNC valdymas. Įrengta 360° pasukama sistema, motorizuotas įrankio tvirtinimas, trijų žandikaulių griebtuvas apvaliems ruošiniams, modernizuotas LCD monitorius, platus įrankių komplektas. Svoris: apie 2900kg, bendri matmenys X/Y/Z: apie 2600mm/1900mm/2950mm. Apžiūra galima susitarus iš anksto. Cedey Tn Ntepfx Aa Deha

Būklė: paruoštas naudoti (naudotas), Donau Danumeric 440 Radial Drilling Machine Drilling capacity (steel): Ø 40 mm Thread cutting: up to approx. M36 (depending on material) Tool holder: SK 40 Spindle speed: approx. 15 – 2,800 rpm (stepless) Csdpoyrdc Sefx Aa Dsha Feed: stepless, approx. 5 – 2,000 mm/min Quill stroke (Z): 200 mm Column travel (W): 410 mm Arm travel: 1,050 mm Drilling radius: approx. 540 – 1,290 mm Arm swiveling range: approx. 330° Column diameter: 195 mm You are welcome to come by for an inspection. We can gladly arrange cost-efficient shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop to see our other offers. Brand names and trademarks mentioned are the property of their respective owners and serve only for identification and description of the products. Deviations from technical data as well as errors in the item description may occur and are subject to change.

Būklė: geras (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Specification • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 x 18 mm T-slots at the rear of the machine base • 2 x 18 mm T-slots on the left side of the machine base • Thread cutting device • Centralized lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travels Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Chedpfx Asyxw Ddja Dja Column travel (W-axis) mm 410 Distance spindle nose – table top min/max mm 70 / 680 Distance spindle nose – floor min/max mm 970 / 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining capacities Drilling capacity solid material: St 60 Ø 40 mm, GG 22 Ø 50 mm Thread cutting: St 60 M 36, GG 22 M 42 Main spindle drive AC Motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min-1 15 – 2800 Torque: Nm max. 250 (constant between 15 – 2000 min-1) Feed drives X-axis AC servo motor kW 0.25 Y-axis AC servo motor kW 0.25 Z-axis AC servo motor kW 4.50 W-axis AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Stepless feeds: mm/min 5 – 2000 Accuracy Positioning accuracy (X, Y-axis over 1200 mm): mm ± 0.075 Electrical data Operating voltage/frequency: V/Hz 400 / 50 Control voltage: V 24 Hydraulic unit for clamping: kW 0.75 Total connected load: kVA 13.0 Weight Danumeric 440 (without packaging) with 1800 x 600 mm table: kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat screen, backlit, legible from all sides, 215 x 160 mm Position display: kartesian or polar, absolute or incremental values Unit of measure: mm or inch, or degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions based on machining type, material-related cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining cycles Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selectable entry options Reference point determination: Cycles for determining reference points by manual probing of the workpiece for: – arbitrarily clamped rectangular parts – arbitrarily clamped round parts – alignment of cast and flame-cut parts – Angle position detection on round parts by probing reference edges/surfaces Test graphic: Graphic display of drilling patterns

Būklė: geras (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – table surface min. mm 70 / max. mm 680 Distance spindle nose – floor min. mm 970 / max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity (solid) St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: rpm 15 – 2800 Torque Nm max. 250 constant between rpm 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds stepless mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Codou Aa I Sspfx Aa Doha Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, clearly legible from all sides, 215 x 160 mm Positioning information: Cartesian or polar, values absolute or incremental, mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogramming: yes Machining Cycles Standard Software Options: Conversational programming, 38 work offset positions, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable functions for targeted program re-entry Zero point determination: Cycles for determining reference points by manually probing the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Aligning cast and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data Interfaces: USB

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Danumeric 440 – Fully Overhauled and Digitized in 2024 Machine Specifications • Work table 1800 x 600 mm with 4 T-slots • Overarm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable spindle speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine light • CE marking • Safety guard Chedpfxou Dg D Ao Aa Dea • USB interface Dimensions and Travel Ranges Tool holder: SK 40 Column diameter: 195 mm Table size: 1800 x 600 mm Number of T-slots: 4 T-slot spacing: 125 mm Quill travel (Z-axis): 200 mm Column travel (W-axis): 410 mm Distance spindle lower edge to table top: min. 70 mm, max. 680 mm Distance spindle lower edge to floor: min. 970 mm, max. 1580 mm Drilling radius: 540 – 1590 mm Working table height: 900 mm Machining Capacity Max. drilling in solid material: • St 60: ⌀ 40 mm • GG 22: ⌀ 50 mm Thread cutting: • St 60: M36 • GG 22: M42 Main Spindle Drive AC motor, frequency-controlled: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm, constant from 15 – 2000 rpm Feed Drives X-axis – AC servo motor: 0.25 kW Y-axis – AC servo motor: 0.25 kW Z-axis – AC servo motor: 4.50 kW W-axis – AC servo motor: 2.50 kW Rapid traverse speeds (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse speed (W): 3 m/min Infinitely variable feeds: 5 – 2000 mm/min Precision Positioning accuracy X, Y axis (over 1200 mm): ± 0.075 mm Electrical Data Operating voltage / frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit for clamping: 0.75 kW Total connected load: 13.0 kVA Weight Danumeric 440 (without packaging) With table 1800 x 600 mm: 2800 kg CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat panel, backlit, clearly readable from all angles, 215 x 160 mm Position display: Cartesian or polar, absolute or incremental values Units: mm or inch, or in degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data recommendations Tool management: max. 500 tools Subprogram functions: yes Machining Cycles Standard software options: Conversational programming, 38 zero point shifts, rotation and mirror functions, teach-in for X, Y, Z, restart in the program with selectable options for targeted re-entry Zero point determination: Cycles to determine zero points by manual probing of the workpiece for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of hole patterns Data interface: USB

Būklė: geras (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – table surface min. mm 70 / max. mm 680 Chjdpfx Aaormkfne Dsa Distance spindle nose – floor min. mm 970 / max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity (solid) St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: rpm 15 – 2800 Torque Nm max. 250 constant between rpm 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds stepless mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, clearly legible from all sides, 215 x 160 mm Positioning information: Cartesian or polar, values absolute or incremental, mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogramming: yes Machining Cycles Standard Software Options: Conversational programming, 38 work offset positions, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable functions for targeted program re-entry Zero point determination: Cycles for determining reference points by manually probing the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Aligning cast and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data Interfaces: USB

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – table surface min. mm 70 / max. mm 680 Distance spindle nose – floor min. mm 970 / max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity (solid) St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: rpm 15 – 2800 Torque Nm max. 250 constant between rpm 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds stepless mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, clearly legible from all sides, 215 x 160 mm Positioning information: Cartesian or polar, values absolute or incremental, mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogramming: yes Machining Cycles Standard Software Options: Conversational programming, 38 work offset positions, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable functions for targeted program re-entry Zero point determination: Cycles for determining reference points by manually probing the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Aligning cast and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Cjdpfxovv Spko Aa Dsha Test graphics: Graphical display of drilling patterns Data Interfaces: USB

Būklė: naudotas, Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 4 000 mm, padavimo eiga Y ašimi: 1 050 mm, padavimo ilgis Z ašis: 200 mm, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Dimensions and Travel Paths Tool holder: SK 40 Table dimensions (mm): 4000 x 800 Number of T-slots: 6 T-slot spacing (mm): 140 Distance - spindle lower edge min. (mm): 140 Distance - table upper edge max. (mm): 740 Drilling radius min (mm): 540 Drilling radius max (mm): 1590 U-axis travel (mm): 2600 Y-axis travel (mm): 1050 Quill stroke (Z-axis) (mm): 200 Column stroke (W-axis) (mm): 400 Machining Performance Drilling capacity in solid material: St 60 (mm): 40 GG 22 (mm): 50 Tapping: St 60: M 36 GG 22: M 42 Main Spindle Drive AC motor, frequency-controlled (kW): 5.5 at 100% duty cycle Speed range (rpm): 15 - 2800 Torque (Nm): max. 250 Constant torque range (rpm): 15 – 200 Feed Drives X-axis – AC servo motor (kW): 0.25 Y-axis – AC servo motor (kW): 0.25 Z-axis – AC servo motor (kW): 4.50 W-axis – AC servo motor (kW): 2.50 U-axis – AC servo motor (kW): 2.50 Rapid traverse speeds (X/Y/Z) (m/min): 7.5 / 7.5 / 5 Rapid traverse speeds (U/W) (m/min): 7.5 / 3 Feed rates, stepless (mm/min): 5 - 2000 Feed force (N): 12000 Accuracy Positioning accuracy X, Y-axis (over 1200 mm) (mm): ±0.075 Repeatability X, Y-axis (mm): ±0.03 Positioning accuracy Z-axis (mm): ±0.05 Repeatability Z-axis (mm): ±0.03 Positioning accuracy W-axis (mm): ±0.05 Repeatability W-axis (mm): ±0.03 Electrical Data Operating voltage/frequency (V/Hz): 400 / 50 Control voltage (V): 24 Total connected load (kVA): 13.0 CNC Control Axes: 5 (X, Y, Z, W, U), expandable Screen: TFT flat panel, backlit, easily readable from all sides Position display: Cartesian or polar, dimensions absolute or incremental Units: mm or inch, as well as degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions based on machining type, material-dependent cutting data recommendations Tool management: Up to 500 tools Subprogram support: yes Machining cycles: Cycles for centering, drilling, tapping, reaming, countersinking, and boring; freely programmable cycle for special tools; dwell time possible for each cycle Chip breaking / chip removal: possible during drilling cycle Drilling patterns: drill row, bolt circle, matrix Basic software: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selection functions for targeted start Datum determination: Cycles for determining zero points by manual probing of the workpiece for: Chjdpfx Ajy Ttrtoa Dea - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Aligning cast and flame-cut parts - Angle determination for round parts by probing reference edges/surfaces Data interfaces Paintwork with signs of use Standard paint, two-component textured paint Machine upper part: light grey RAL 7035 Machine lower part: light blue RAL 5012 Documentation Operating and programming manual Electrical circuit diagram Spare parts drawings Test report for mechanics, electrical system, and safety equipment

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1983, Work table 600mm x 1200mm Horizontal arm travel 600mm Tool holder MK 4 Drilling capacity 32mm in steel Thread-cutting device Coolant system Electrics 24V control voltage Emergency stop, dual-channel Drill safety guard Chodpsmt Ed Rsfx Aa Dja Fully overhauled in 2025 12-month warranty New paint RAL 7035/7031

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1976, Worktable 500mm x 1200mm Arm travel 600mm Tool holder MK 4 Drilling capacity 32mm in steel Tapping device Codewnn S Rspfx Aa Dsha Coolant system Electrics 24V control voltage Emergency stop, dual channel Safety guard at drill Completely overhauled 2025 12 months warranty New paint finish RAL 7035/7031

Būklė: geras (naudotas), 1 naudota greitaeigio radialinė gręžimo staklė Gamintojas: Donau Modelis: DR 28 Z Pagaminimo metai: 1985 Techniniai duomenys: - Gręžimo našumas į pilną plieną ST 60 – 28 mm - Gręžimo našumas GG 25 – 40 mm - Sriegių pjovimas ST 60 – M 30 - Sriegių pjovimas GG 25 – M 40 - Gręžimo veleno prisijungimas – MK 3 - Veleno skersmuo – 50 mm - Pinos eiga – 150 mm - 18 gręžimo veleno greičiai – 45–2240 aps./min. - 4 gręžimo padavimo greičiai – 0,1–0,45 mm - Min./maks. atstumas nuo veleno iki stalo – 300 / 700 mm - Gręžimo spindulys min./maks. – 305 / 1005 mm - Stalo aukštis – 820 mm - Stalo dydis – 1200 x 600 mm - Variklis – 400 V / 6 kW - Užimamas plotas (apytiksliai): plotis 1300 x aukštis 2800 x gylis 2300 mm - Svoris (apytiksliai): 1500 kg - Įskaičiuota: - Sriegių pjovimo įranga - Hidraulinė kolonėlė + atramų fiksatorius - Aušinimo skysčio įranga - T formos grioveliai – vertikaliai, kairėje staklių pusėje. Chjdpfx Aaezl Ufce Dea

Būklė: geras (naudotas), Gamybos metai: 1962, Rapid radial drilling machine, radial drilling machine, drilling machine, cantilever drilling machine, rapid radial drilling machine - Clamping table: 400 x 1100 mm - Arm reach: 930 mm - Taper: MT4 Chsdeirax Uopfx Aa Doa - Motor power: 1.35/1.8 kW - Spindle speeds: 41-1700 rpm - Column diameter: Ø 200 mm - Spindle stroke: 125 mm - Thread cutting device: YES - Feed: 0.075 - 0.3 mm/rev - Dimensions: 1800/1235/H2240 mm - Weight: 1500 kg

Būklė: naudotas, Gamybos metai: 1990, Fräslänge 2100 mm Fräsbreite 300 mm Modul - max. 16/18 Modul - min. Gesamtleistungsbedarf 10 kW Maschinengewicht ca. 5 t Raumbedarf ca. m D O N A U - K N A P P Universal - CNC gesteuerte Zahnstangenfräsmaschine Type UZFM - V 300 H - CNC Baujahr 1990 # 90-244x _____ max. Verzahnungslänge 2.100 mm Fräsweg/Fräsbreite quer max. 300 mm Modulbereich St/GG max. 16/18 Tisch-Aufspannfläche 510 x 2.400 bzw. 275 x 2.120 mm Einbauhöhe unter Fräs-Spindel-Achse min./max. 150 / 430 mm Fräser-Ø min. / max. Ø 125 + 2 x Schnitttiefe / 280 mm Fräserbreite max. fliegend / mit Gegenlager 50 / 140 mm Fräserdorn-Ø max. 22 - 50 mm Frässpindelkopf schwenkbar rechts / links (Hinterfräsungen) 30 / 45 ° Frässchlitten schwenkbar rechts / links (Schrägverzahnung) 30 ° 9 Spindeldrehzahlen 40 - 120 U/min. Vorschübe stufenlos (Frässchlitten) / Eilgang 0 - 1.300 / 2.000 mm/Min. Tisch-Eilgang 10.000 mm/Min. Frässpindelantrieb 5,5 kW Gesamtantrieb 10 kW - 400 V - 50 Hz Gewicht 5.000 kg Zubehör / Sonderausstattung: o SIEMENS - CNC - Steuerung Model M 810 für die Teilachse ( X ), sodaß eine schnelle Umstellung der Maschine möglich ist ohne Wechselräder. Teilschritte 0,001 - 2100 mm, auch unterschiedliche Teilungsdistanzen programmierbar, " Einstellung aller Vorschub- und Eilgangwege über die Hydraulik, Vorschub einstellbar für 2 Schnitte, Wegbegrenzung der Achsen über voreinstellbare Endschalter o Aufgebaute hydraulische Werkstückspanneinrichtung ca. 2.000 x 160 mm lang o verstärkter Fräskopf mit stufenlos regelbare Fräserdrehzahl o separat stehender Schaltschrank und Hydraulikanlage , im Tisch eingebauter Späneföderer und separat stehender Späneförderer mit Kühlmitteleinrichtung, Zentralschmierung, etc. Die Maschine könnte auch mit einer aktuellen SIEMENS-Steuerung nachgerüstet werden! Chodpfx Aaot Hwwqs Dsa Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale and error in technical data: D O N A U - K N A P P (Germany) Universal - CNC-Controlled Rack Milling Machine Model UZFM - V 300 H - CNC Year 1990 Serial No. 90-244x _____ Max. Cutting length 2.100 mm Milling travel / milling width cross max. 300 mm Module in steel / cast iron, max. 16 / 18 Table clamping size 510 x 2.400 resp. 275 x 2.120 mm Mounting height under cutter, depending on cutter Ø 150 - 430 mm Cutter Ø, min./max Ø 125 + 2 x cutting depth / Ø 280 mm Cutter width max. without/with counter bearing support 50 / 140 mm Cutter mandrel Ø max. 50 mm Milling spindle head, swivelling ( for relief cuts ) right / left 30 / 45 ° Milling spindle speeds steplessly adjustable 40 - 120 rpm Milling slide swivelling right / left for Helix Cuts 30 ° Feeds, infinitely variable (milling slide) 0 - 1.300 / 2.000 mm/min Quick return of WP-table 10.000 mm/min Milling spindle drive 5,5 kW Total electrical load 10 kW - 400 V - 50 Hz Weight 5.000 kg Accessories / Special Features: * SIEMENS-CNC-Control for the Indexing axis ( X ) so th...

Būklė: naudotas, Gamybos metai: 1980, Milling length: 1750 mm Cjdpfot Hxagsx Aa Dsha Milling width: 260 mm Module – max.: 10 Module – min.: 12 Total power requirement: 8 kW Machine weight approx.: 4500 kg Space requirement approx.: m D O N A U - K N A P P Universal Rack Milling Machine Model UZFM - V 300 H Year of manufacture: 1980 # 80-234x ----- Max. gear cutting length: 1,750 mm Milling travel / max. cross milling width: 260 mm Helical gearing up to: 30° Module range steel/grey cast iron max.: 10 to 12 Effective clamping surface (table): 275 x 1,830 mm Mounting height under milling spindle axis min./max.: 150 / 430 mm Milling cutter diameter min. / max.: 108 + 2 x cutting depth / max. 165 mm Max. milling cutter width unsupported / with counter support: 50 / 140 mm Milling arbor diameter max.: 22 - 50 mm 9 spindle speeds: 29 – 178 rpm Milling slide swivels right/left: 30° Milling spindle head swivels right/left: 30 / 45° Infinitely variable feed (milling slide): 0 – 600 mm/min Rapid return: 2,000 mm/min Milling spindle drive approx.: 4 kW Total drive: 8 kW - 400 V - 50 Hz Weight: 4,500 kg Accessories / Special Equipment: • Automatic milling sequence control via cam track on milling head slide and table slide, with skip function (automatic bypass of non-machining areas) and pendulum milling operation (synchronous milling on one half of the table with workpiece changeover on the second half) • Hydraulic workpiece clamping system, continuous approx. 260 x 1800 mm, max. clamping width 140 mm, clamping height approx. 60 mm, with dedicated hydraulic unit and electrical release • Manual fine adjustment of the table (0.001 mm), e.g., for precise positioning into a pre-milled gearing • Various change gears (approx. 10 pcs), 2 arbor mandrels, central lubrication with impulse, built-in hydraulic system, separate coolant device, separate control cabinet, various used rack milling cutters Price, ex stock plus VAT: € 49,500.-- This machine is particularly suitable for milling racks as well as for the production of broaching tools (undercutting by swiveling the milling head). Condition: very good – ready for demonstration Delivery: ex stock – as inspected Payment: net – upon receipt of invoice

Būklė: labai geros būklės (naudotas), LDS / CTS Vibration Test System Type: V850-440 LPT 750C + CTS CV-70/1100-5 Manufacturer: LDS / CTS / IMV For sale is a complete electrodynamic vibration testing system, consisting of an LDS shaker system, LDS SPA30KCE power amplifier, IMV K2+ vibration controller, and a CTS climate chamber. Ideal for combined vibration and climate testing in automotive, aerospace, electronics testing, research & development, material testing, as well as industrial quality assurance. The blue overhead/gantry crane visible in the pictures is not included in the scope of delivery. Shaker / Vibrator Manufacturer: Ling Dynamic Systems Ltd. (LDS) Model: V850-440 LPT 750C Air-cooled electrodynamic shaker. Armature diameter: 440 mm Frequency range: DC – 3000 Hz Resonance frequency: approx. 2200 Hz Sine force: approx. 22.2 kN peak Random force: approx. 22.2 kN RMS Shock force: approx. 66.7 kN peak Max. velocity: 2.0 m/s Displacement: 50.8 mm pk-pk Internal payload capacity: approx. 350 kg Compressed air supply required: Load support: approx. 5.5 bar Air isolation: approx. 6.9 bar Shaker weight: approx. 1,300 kg Power Amplifier Manufacturer: LDS Model: SPA30KCE Class-D high-performance switching amplifier. Supply voltage: 50 Hz: 380 / 400 / 415 / 440 V 60 Hz: 380 / 400 / 415 / 440 / 460 / 480 / 500 / 520 V Current setting: 400 V Max. power consumption: 38.14 kVA Max. output power: 21.0 kW Output voltage: 100 V RMS Amplifier weight: approx. 550 kg Controller IMV K2+ Vibration Control System Codpfxjy Sy Npo Aa Djha Multi-channel vibration controller including Dell Precision PC system. Functions: - Sine - Resonance dwell - Limit control - Random - Sine-on-random - PSD limit control - Shock - Scheduler - System monitor CTS Climate Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Model: CV-70/1100-5 Year of manufacture: 10/2019 Temperature range: -70 °C to +180 °C Humidity range: 10% to 95% rH Nominal voltage: 400 V / 3/N / 50 Hz Power: 15.9 kW Refrigerants: R452A: 6.8 kg R23: 2.1 kg Equipment: - Combined climate and vibration testing - Slip table / mounting table included - Fully wired test system - Service and maintenance documentation available Slip Table: Clamping surface: approx. 760 x 850 mm Thread insert spacing: approx. 100 mm Dimensions / Weight Large industrial facility / heavy-duty system. Total system weight: approx. 6,000 – 7,000 kg Transport only via suitable heavy-duty freight forwarder. Dimensions, weights, and technical data are partially estimated or not fully known. Condition Used industrial plant from previous industrial use. Cosmetic condition as shown in the photos. On-site inspection and testing possible by arrangement. Scope of delivery - LDS V850-440 LPT 750C shaker system - LDS SPA30KCE power amplifier - IMV K2+ vibration controller - Dell Precision PC system - CTS climate chamber CV-70/1100-5 - Slip table / mounting table - Accessories and documentation as shown in photos Not included: Blue overhead/gantry crane. Loading possible by arrangement. Commercial sale without warranty. Subject to change, error, and prior sale.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Dimensions and Travel Paths Tool Holder: SK 40 Table Dimensions: mm 4000 x 800 Number of T-slots: 6 T-slot spacing: mm 140 Distance, spindle lower edge min.: mm 140 table upper edge max.: mm 740 Drilling radius min.: mm 540 max.: mm 1590 U-axis travel: mm 2600 Y-axis travel: mm 1050 Quill stroke (Z-axis): mm 200 Column stroke (W-axis): mm 400 Machining Values Drilling capacity, solid material St 60: mm 40 GG 22: mm 50 Thread cutting St 60: M 36 GG 22: M 42 Main Spindle Drive AC Motor, frequency controlled kW 5.5 at 100 % duty cycle Speed range: rpm 15 - 2800 Torque: Nm max. 250 Constant from: rpm 15 – 200 Feed Drives X-axis - AC Servo Motor: kW 0.25 Y-axis - AC Servo Motor: kW 0.25 Z-axis - AC Servo Motor: kW 4.50 W-axis - AC Servo Motor: kW 2.50 U-axis - AC Servo Motor: kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (U/W): m/min 7.5 / 3 Feed rates, stepless: mm/min 5 - 2000 Feed force: N 12000 Accuracy Positioning accuracy X, Y axis on 1200 mm: mm ± 0.075 Repeatability X, Y axis: mm ± 0.03 Positioning accuracy Z-axis: mm ± 0.05 Repeatability Z-axis: mm ± 0.03 Positioning accuracy W-axis: mm ± 0.05 Repeatability W-axis: mm ± 0.03 Cjdpfx Ajv If T Tsa Doha Electrical Data Operating voltage / frequency: V / Hz 400 / 50 Control voltage: V 24 Total connected load: kVA 13.0 CNC Control Axes: 5 (X,Y,Z,W,U), expandable Display: TFT flat panel, backlit, clearly visible from all sides Position information: Cartesian or polar, measurements absolute or incremental Unit of measure: mm or inch, or degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions by machining process, material-dependent cutting data recommendations Tool management: up to 500 tools Subprogram technique: yes Machining cycles: cycles for centering, drilling, tapping, reaming, countersinking, and boring; freely programmable cycle for special tools; dwell time possible in every cycle Chip breaking/chip removal: possible in drilling cycle Drilling patterns: linear, circular, matrix Basic software: conversational programming, 38 zero point shifts, rotating and mirroring, teach-in for X, Y, Z, program restart with selectable entry point Zero point determination: cycles for zero point determination by manually probing the workpiece for: - arbitrarily clamped rectangular parts - arbitrarily clamped round parts - alignment of cast and flame-cut parts - angle position detection for round parts by probing reference edges/surfaces Data interfaces: USB interface Coating (Refinishing) Standard painting, two-component textured paint Machine upper part: light grey RAL 7035 Machine base: signal blue RAL 5005 Documentation Operating and programming manual Electrical schematic Spare parts drawings Test report for mechanics, electrics and safety device

Būklė: geras (naudotas), „Donau DR 32“ – greitaeigis radialinis gręžimo staklės Aukšto tikslumo ir tvirti greitaeigiai radialiniai gręžimo staklės, kurie naudojami mašinų gamyboje ir pramoninėje gamyboje, pasižymintys patikimumu. Dėl pasukamo ištraukiamo svirties, galima greitai ir lanksčiai pozicionuoti gręžimo galvutę virš apdirbamo gaminio. Techniniai duomenys Gręžimo našumas: iki 32 mm pliene. Įrankio laikiklis: MK 4 (Morse kūgis). Sukimosi greičio diapazonas: maždaug 41–1800 aps./min. Cjdsznkgnspfx Aa Doha Veržlės eiga: 190 mm–200 mm. Ištraukimo ilgis: lanksčiai reguliuojamas nuo maždaug 240 mm iki 850 mm. Stalo matmenys: 1200 x 600 mm. Tipinės funkcijos Srieginio įrankio įdėklas: integruotas automatinis įtaisas, skirtas sriegiams pjauti (pvz., iki M26 pliene). Padavimai: automatinis veržlės padavimas keliais etapais. Aušinimo skysčio sistema: integruotas siurblys ir aušinimo skysčio kanalas tiesiai ant darbo stalo. „Viską vienoje vietoje: mielai pasiūlysime Jums tinkamą finansavimo planą Jūsų projektui.“ komplett-konzept.leasingo.de Daugiau naujų ir naudotų prekių rasite mūsų parduotuvėje! Tarptautinio siuntimo kaina – pagal užsakymą!

Būklė: geras (naudotas), „Donau DR 40 Z“ – greitaeigis radialinis gręžtuvas „Donau DR 40 Z“ yra galingas, įprastas greitaeigis radialinis gręžtuvas, skirtas naudoti amatų ir pramonės sektoriuose. Jis pasižymi dideliu lankstumu, sukiojamu ir ištraukiamu sėdimuoju, todėl galima greitai ir tiksliai apdirbti detales. Techniniai duomenys Chodpfx Asznkd Toa Doa Gręžimo našumas: iki 40 mm pliene ir 50 mm ketaus. Sriegių pjovimas: didžiausias M 33 pliene ir M 45 ketaus. Įrankio tvirtinimas: MK 4 (Morse kūgio tvirtinimas 4). Veleno eiga: 200 mm. Išsikišimas: nuo 320 mm iki 1140 mm, reguliuojamas. Detalės aukštis: didžiausias apie 700 mm. Stalo matmenys: 1200 x 750 mm. Sukimosi greičio diapazonas: nuo 45 iki 2240 aps./min. Padavimas: nuo 0,075 iki 0,6 m/min. Variklio galia: apie 6 kW. Svoris: apie 1,8–2,0 tonos. „Viskas iš vienų rankų: mielai pasiūlysime jums tinkamą banko finansavimo planą jūsų projektui.“ komplett-konzept.leasingo.de Daugiau naujų ir naudotų prekių rasite mūsų parduotuvėje! Tarptautiniai siuntimo įkainiai nurodomi atskirai!

Būklė: geras (naudotas), „Donau Danuflex-128“ – greita radialinė gręžimo staklė Rankinė greita radialinė gręžimo staklė, pagaminta žinomo vokiečių gamintojo „DONAU Werkzeugmaschinen“. Šios klasės staklės pasižymi itin lanksčia, lengvai valdoma pasukimo sistema ir dažniausiai naudojamos įrankių gamyboje, įrenginių gamyboje, taip pat vienetų ir mažų serijų gamyboje. Techniniai duomenys: Įrankio laikiklis: MK4 (Morzės kūgis 4) Darbinis stalas: 500 x 1055 mm Maksimali iškyša: 1120 mm Veleno eiga: 160 mm Stulpo skersmuo: Ø 150 mm Sūkių diapazonas: 45–2240 aps./min. (perjungiamas elektriniu būdu) Pašarmo diapazonas: 0,075–0,3 mm/aps. Chodpfx Aaozni T Hj Dsa Variklio galia: 1,5 / 2,2 kW Bendras svoris: apie 1800 kg Papildoma įranga: integruota sriegių pjovimo įranga „Viskas iš vienų rankų: mielai pasiūlysime jums tinkamą banko finansavimo planą jūsų projektui.“ komplett-konzept.leasingo.de Daugiau naujų ir naudotų prekių rasite mūsų parduotuvėje! Tarptautinio pristatymo kaina nurodoma atskirai!

Būklė: naudotas, Gamybos metai: 1990, Montavimo įtaisas MK 3 Serijos numeris 4131 Atstumas nuo centro 1000 mm Dokumentacija yra Cedpfxezkbqve Aa Doha Hidraulinis užspaudimas, kW Apytikslis mašinos svoris 2,6 t 3 kubiniai metrai krovininiame automobilyje

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 2 900 mm, Y ašies eiga: 1 000 mm, Z ašies eigos atstumas: 700 mm, CNC gręžimo ir frezavimo centras Donau DANUSYS 2910, pagamintas 2002 m., kapitališkai suremontuotas Techniniai duomenys: Valdymas: Heidenhain iTNC 530 Eigos: X-, Y- ir Z ašys: 2900 / 1000 / 700 mm Frezavimas St 60: 300 cm³/min Gręžimas pilnai St. 60: ø 40 mm Sriegimas: M30 Pavaros greitis X-, Y- ir Z ašyje: 7 / 7 / 7 m/min Velenas HSK 63, 15000 aps./min. Aušinimo skystis: vidinis ir išorinis tiekimas (IKZ ir AKZ) Įrankių keitiklis su 32 pozicijomis, padalintas į 2 x 16 vnt. Atnaujintos dalys: - Velenas visiškai suremontuotas ir pervyniotas gamintojo - Veleno valdiklis suremontuotas - Atnaujintas Heidenhain maitinimo blokas - Tikrintas Heidenhain pagrindinis kompiuteris MC422 ir valdymo blokas CC422 - Pakeistas Y ašies vežimėlis ir kreipiančioji Chodpfx Aaezlx Axe Dja Papildoma įranga: Rankenėlė HR 410 Drožlių transporteris su integruotu aušinimo skysčio baku Dokumentacija (naudojimo instrukcija, įvairūs vadovai naudojamiems dokumentams, elektros schema ir kt.) Parduodama iš sandėlio; tarp pardavimų gali keistis

Būklė: naudotas, Gamybos metai: 1960, Techninė informacija: Detalės aukštis - maks.: 600 mm Pasiekiamumas: apie 700 mm Gręžimo pajėgumas pliene (skersmuo): 25 mm Stalo dydis: 1100 x 400 mm Šiuo metu įrenginys yra technikos skyriuje. Todėl įrenginys NĖRA paskelbtas/eksponuojamas. Remonto darbai dar tęsiami.... Codpfx Aex Afn Nea Deha