Cei Frezavimo Centras pirkti naudotą (13 694)

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, tekėjimo skersmuo: 460 mm, veleno greitis (maks.): 3 500 aps./min, valdiklio modelis: Fanuc 32iTB iHMI, priešpriešinio veleno didžiausias greitis: 4 500 aps./min, CMZ tekinimo ir frezavimo centras su GL20II portaliniu krautuvu! TECHNINĖS CHARAKTERISTIKOS Tekėjimo skersmuo virš lovos: 760 mm Tekėjimo skersmuo virš vežimo: 600 mm Maksimalus tekinimo skersmuo: 460 mm Centro atstumas: 689 mm Atstumas griebtuvas – griebtuvas: 625 mm X ašies eiga: 310 mm Z ašies eiga: 640 mm Y ašies eiga: +70/-50 mm B ašies eiga: 640 mm Greitaeigiai režimai: 30/30/15/30 m/min Maksimalus pagrindinio veleno sūkių skaičius: 3.500 aps./min. ASA 8" A2 Giedpfjy Hk Niox Ah Aot Maksimalus priešinio veleno sūkių skaičius: 4.500 aps./min. ASA 6" A2 Išorinis veleno guolio skersmuo: 200 mm Vidinis veleno guolio skersmuo: 130 mm Veleno skylė: 86 mm Lazdelių pratekėjimas: 78 mm Įrankių vietų skaičius: 12, visi varomi, 12.000 aps./min. Įrankių laikiklis: 25x25 (50) STAKLIŲ DUOMENYS Valdymas: Fanuc 32iTB iHMI Matmenys ir svoris Staklių svoris: 6.500 kg Staklių matmenys (I x P x A): 2.542 x 1.760 x 1.880 mm ĮRANGA Portalinis krautuvas

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, tekėjimo skersmuo: 460 mm, veleno greitis (maks.): 3 500 aps./min, veleno skylė: 86 mm, strypo praėjimas: 78 mm, valdiklio modelis: Fanuc 32iTB iHMI, plotis centre: 689 mm,

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2006, veikimo valandos: 19 067 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 122616, X ašies eiga: 500 mm, Y ašies eiga: 95 mm, Z ašies eigos atstumas: 1 650 mm, valdiklio modelis: OKUMA OSP P200L, plotis centre: 1 500 mm, TECHNINĖS DETALĖS X ašies eiga: 500 mm Y ašies eiga: 95 mm Z ašies eiga: 1 650 mm Sūkiu diametras ties lova: 550 mm Galia: 22,0 kW Atstumas tarp centrų: 1 500 mm Veleno perėjimo skersmuo: 80 mm Priešpriešinio veleno sūkių greitis: 4 500 aps./min. Gjdpfxey Rxpre Ah Asit Įrankių magazinas: 44 vnt. Įrankių tvirtinimas: HSK-F63 STAKLIŲ DETALĖS Valdymas: OKUMA OSP P200L Matmenys ir svoris Matmenys (I x P x A): 5 100 x 2 800 x 2 900 mm Transporto svoris: 13 700 kg Transporto paketai: 7 vnt. Darbo valandos: 19 067 h ĮRANGA Automatinis ruošinio padavimas su valdomu Pneumotec svirtimi Automatinis strypų padavimas LNS Quick Load Servo III Priešpriešinis velenas VAC-MB11 Frezuojanti galvutė su automatiniu įrankių keitikliu Sukamasis revolveris: 12 įrankių keitiklių Drožlių transporterio Revolverinė galvutė Varomieji įrankiai Strypų padavėjas Trijų žioklių griebtuvai Įrankių magazinas C ašis Dokumentacija CE ženklinimas

Būklė: naudotas, Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, Parduodamas CNC tekinimo centras EMCO Turn 325-II (2005 m.) Būklė: gera, techniškai tvarkinga. Gamintojas: EMCO Maier GmbH (Austrija) Modelis: Turn 325-II Pagaminimo metai: 2005 Kompaktiškas ir patikimas CNC tekinimo centras, skirtas įvairių metalo detalių apdirbimui, sriegimui ir frezavimui mažose bei vidutinėse gamybos apimtyse. Pagrindiniai techniniai parametrai: (duomenys pagal Emco Turn 325-II modelio specifikaciją) Valdymas: Siemens Maks. tekinimo skersmuo: 250 mm Maks. tekinimo ilgis: 500 mm Veleno greitis: iki 5000 aps./min Įrankių galvutė: 12 pozicijų (automatine įrankių keitimo sistema) Maks. įrankio ilgis: 100 mm Variklio galia: apie 15 kW Aušinimas: integruota aušinimo sistema Maitinimas: 400 V / 50 Hz Mašinos svoris: ~3500 kg Gijdpfoxp Iyhex Ah Aet Jei turėsite daugiau klausimų, mielai atsakysime.

Būklė: naudotas, Gamybos metai: 2007, veikimo valandos: 39 359 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 0-201-04-0605, Description of the Main Equipment: Clamping table with matrix aluminium construction Vacuum system prepared for 1000 m³/h nesting technology Power Control control panel with PC85 Main spindle 15 kW with vibration sensor C-axis with aggregate interface Interface for FLEX-5 aggregate Plate-type tool changer with 10 positions Drilling unit: 13 spindles – 9 vertical and 2+2 horizontal spindles Software package for office computer WoodWOP Tools software Giedpfeyucyzsx Ah Aet Maximum positioning speed: 80 m/min in X and Y directions (vector speed: X/Y = 113 m/min) / 30 m/min in Z direction

Būklė: labai geros būklės (naudotas), Gamybos metai: 2009, MAZAK Quick Turn Nexus 100-II M Valdymas Mazatrol Matrix Nexus C ašis su varomais įrankiais 6 colių Kitagawa BB206 griebtuvas Veleno pralaida 51 mm Maks. tekėjimo skersmuo 280 mm Z ašis – 385 mm X ašis – 185 mm Maksimali veleno apsukų skaičius 6000 aps./min. Gsdpfxsyhh Dro Ah Ajit Varomų įrankių maks. apsukos 4500 aps./min. 12 pozicijų revolverinė galva Programuojamas centravimo įtaisas Įrankio zondas Detalių surinkėjas Komplekte su įrenginiu: - 4 varomieji įrankiai (2/2) - 8 paprasti įrankių laikikliai - Drožlių išstūmėjas - Dokumentacija Darbo valandos: 3180

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, 2 ašių CNC tekinimo staklės MAZAK QTN 100II Mazatrol Matrix Žnyplės Kitagawa BB206 Veleno pervėrimas 51 mm Tekinimo ilgis 310 mm Tekinimo skersmuo 280 mm X - 190 mm Gijdpfx Asyvzwvsh Aot Z - 330 mm Veleno maks. 6000 aps./min. 12 pozicijų revolverinė galva Įrankių matavimo jutiklis Galinis atrama Su staklėmis pridedama: -vonia su aušinimo siurbliu -dokumentacija

Būklė: labai geros būklės (naudotas), Gamybos metai: 1989, For sale: CNC lathe Mazak QuickTurn 20N. The lathe is in very good condition. Equipment includes: MAZATROL T-2, MAZATROL CAM-T-2 control. Gijdeu U R E Aepfx Ah Ajt

Būklė: labai geros būklės (naudotas), Gamybos metai: 2022, veikimo valandos: 1 450 h, mašinos/transporto priemonės numeris: 0031001080A, Diese 3-Achsen-Drehmaschine DMG MORI CLX 450 V3 wurde 2022 gebaut, ich bin seit dem Neukauf der einzige Besitzer, kein Händler! Die Maschine verfügt über einen maximalen Drehdurchmesser von 400 mm und einen Z-Achsen-Verfahrweg von 600 mm. Ausgestattet ist sie mit einer leistungsstarken Spindel mit bis zu 4000 U/min sowie 12 angetriebenen Werkzeugstationen für höchste Flexibilität. Wenn Sie auf der Suche nach einer hochwertigen CNC-Drehmaschine sind, ist die DMG MORI CLX 450 V3 in Horizontalbauweise eine ausgezeichnete Wahl. Kontaktieren Sie uns gerne für weitere Informationen. • Ausführung: V3 (ohne Y-Achse); konfiguriert für Drehen + Fräsen (C-Achse) • Arbeitsraum: • Umlauf über Bett: 650 mm • Umlauf über Planschieber: 465 mm • Max. Drehdurchmesser: 400 / 315 mm • Eilgang X/Z: 30 / 30 m/min • Achsen: X, Z, C; C-Achsen-Positionsgenauigkeit: 20 Winkelsekunden • Hauptspindel: • Spindelaufnahme: A2-8 • Stangendurchlass: 80 mm • Lagerdurchmesser vorn: 130 mm • Futterdurchmesser wahlweise: 210 / 250 / 315 mm • Spindelleistung (40% / 100%): 25,5 / 17 kW • Max. Drehmoment (40% / 100%): 426 / 283 Nm • Revolver (VDI 40): • 12 Stationen (alle angetrieben) • Werkzeugstation-Ø: 40 mm • Angetriebene Werkzeugleistung: 5,44 kW • Angetriebenes Werkzeug-Drehmoment: 20 Nm • Max. Drehzahl der angetriebenen Werkzeuge: 4000 U/min • Reitstock: • Verfahrweg: 500 mm • Spitzenaufnahme: MK5 • Max. Kraft: 8 kN • Führungen / Kugelgewindespindeln: X/Z 40 × 10 mm • Genauigkeit: Positioniergenauigkeit X/Z: 5 / 10 µm • Spannbereich: • Max. Stangendurchlass: 80 mm • Hydraulikfutter: Ø 254 mm (montiert) • Futterdurchgang: 82 mm • Kühlmittel- und Spänehandling: • Kühlmittelpistole 5 bar; Spänebehälter • Steuerung: Siemens SLIMline Multi-Touch (19") • Abmessungen & Gewicht: • Gewicht ohne Späneförderer: ca. 4950 – 5050 kg • Gewicht mit Späneförderer: ca. 5500 kg • Hinweis: Voll ausgestattet mit 12 angetriebenen Werkzeugsätzen Zusätzliche Ausstattung: • Späneförderer (rechte Auswurfseite) • Hydraulischer Reitstock (M-Funktion gesteuert) • Direktes Messsystem (X-Achse) • Externes elektronisches Handrad • DMG MORI IoTconnector • Marposs Werkzeugvermessung • Signalsäule (4-farbig) Giedpfxsy Rfbzo Ah Aet • Satz statische Werkzeughalter VDI 40 • Satz angetriebene Werkzeuge WTO (QuickFlex, ER32) Technische Spezifikation Gegenspindel: Nein Angetriebene Werkzeuge: Ja

Būklė: labai geros būklės (naudotas), Hello, I have for sale a DMG GILDEMEISTER CTX 310 V3 CNC LATHE with driven tools. Gijdpfxjy Rb H Hs Ah Aet TECHNICAL & VISUAL CONDITION: Very good Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 310 V3 Control: Heidenhain Data Pilot 4290 Country of origin: Germany Year of manufacture: 2003 - Total machine operating hours: 9,144 h Machine specifications: - Turret: 12-tool positions with VDI-30 holders + TurnPlus add-on - Max spindle speed: 5,000 rpm - C-axis - Driven tools - Hydraulic tailstock - Through-spindle - Max turning diameter X-axis: 190 mm - Max turning length Z-axis: 455 mm - Coolant system - Hydraulic 3-jaw chuck SMW AutoBlock - Spindle bore: 50 mm - Chip conveyor - Complete programming manual - Mechanical and electrical documentation - Machine weight: 3.8 t - Loading is included in the price The machine has undergone full inspection. 100% operational. Connected and ready for immediate work. Stal-Com has been specializing in the sale, servicing, and training on DMG group CNC machines for 19 years. We focus on all models of Gildemeister lathes and Deckel Maho machining centers. Every machine goes through a thorough technical inspection. In addition to Polish customers, our machines are also purchased by clients from across Europe and parts of Asia. Each machine can be checked during production, as we also perform metalworking in-house. After purchasing a machine from us, we provide operator training and can also assist in setting up part production at your facility. We cooperate on a regular basis with numerous companies to whom we deliver additional machine tools.

Būklė: labai geros būklės (naudotas), For sale: CNC LATHE GILDEMEISTER CTX 410 V3 with driven tools TECHNICAL AND VISUAL CONDITION: Very Good Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 410 V3 Control system: Heidenhain 4290 Country of origin: Germany Year of manufacture: 2006 The machine is fully equipped with fixed and driven tool holders. Machine specifications: - Turret: 12 positions for VDI-30 holders (all slots powered) - Max spindle speed: 5000 rpm - C axis - Driven tools - Tailstock - Max turning diameter X axis = 320 mm - Max turning length Z axis = 600 mm Gedsy Rb Ecspfx Ah Ajit - Cooling system - Hydraulic collet chuck on the main spindle (can be exchanged for a 3-jaw chuck) - Through-hole main spindle (bore diameter 66 mm) - Finished parts catcher - Chip conveyor - Full programming manual - Mechanical and electrical documentation - Machine weight: 5 tons - Loading included in the price The machine has undergone a full inspection. 100% operational. Connected and ready for work. Stal-Com has been selling, servicing, and providing CNC machine trainings from the DMG group for 20 years. We specialize in all Gildemeister lathe models as well as Deckel Maho Machining Centers. All our machines undergo a meticulous technical inspection. Our machines are purchased not only by customers from Poland, but also throughout Europe and part of Asia. Each machine can be checked under production, as we also provide machining services. After purchasing a machine from us, we conduct crew training and can set up detail production at the customer’s site. We cooperate with many companies on a long-term basis, providing them with further machine tools.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, For sale: GILDEMEISTER CTX 410 V6 CNC Lathe with driven tools, Y-axis, and sub-spindle TECHNICAL & VISUAL CONDITION: Very Good Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 410 V6 Control: Heidenhain 4290 Country of manufacture: Germany Year of manufacture: 2007 The machine is fully equipped with both static and driven tool holders. Machine specifications: - Turret: 12 tool positions, VDI-30 holders (all stations powered) - Max spindle speed: 5000 rpm Gedpfey Rbz Dsx Ah Aeit - C-axis on both spindles - Driven tools - Y-axis - Sub-spindle - Max turning diameter on X-axis: 320 mm - Max turning length on Z-axis: 600 mm - High-pressure coolant system - Hydraulic 3-jaw chuck on main spindle, 250 mm - Hydraulic 3-jaw chuck on sub-spindle, 200 mm - Through spindle bore (bore diameter 77 mm) - Finished part catcher - Chip conveyor - Complete programming manual - Mechanical and electrical documentation - Machine weight: 6 tons - Loading included in the price The machine has undergone a full technical inspection. 100% operational. Connected and ready for operation. Stal-Com has been selling, servicing, and providing CNC machine training for over 20 years, specializing in all Gildemeister lathe models and Deckel Maho machining centers from the DMG group. All our machines go through a thorough technical inspection. Our customers include those from all over Europe and parts of Asia, not just Poland. Every machine can be inspected in production, as we also provide machining services. After purchasing a machine from us, we offer staff training and can set up the production of parts at your facility. We cooperate with many companies on a long-term basis, supplying additional machine tools as needed.

Būklė: naudotas, Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, Tekinimo/frezavimo centras su priešpriešiniu velenu su 10 CNC ašių (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Valdymas: FANUC 31:iA Pagrindinis velenas Veleno galia: 15/11 kW Strypų skersmuo: 51 mm Veleno apsisukimai: 5000 min-1 Priešpriešinis velenas Veleno galia: 11/7,5 kW Strypų skersmuo: 51 mm Veleno apsisukimai: 50000 min-1 Tekinimo/frezavimo velenas Galia: 7,5/3,7 kW Apsisukimai: 12000 min-1 maks. tekinimo ilgis apatinis revolveris: 1005 mm Stūmoklio eiga X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 / 1090 / 1005 / 1008 mm Stūmoklio eiga Y1/ Y2: + - 70 / + - 50 mm B1 ašies pasukimo diapazonas: + - 95 ° Gisdpfxoy N Sw Ts Ah Ast Linijinis stelažinis žurnalas su palaikymo robotu CNC atraminė liunetė Aušinimo skysčio cikloninis filtravimo įrenginys su 2 aušinimo skysčio siurbliais Veleno alyvos aušintuvas

Būklė: labai geros būklės (naudotas), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, We offer you the following: Manufacturer: DMG MORI Model: NTX 3000/1500 Giodpfx Ahjy Sfx Nj Aet Year of manufacture: 2023 Control system: DMG Mori Celos with Fanuc F31iB5 Technical Data: Max. turning diameter: 670 mm Turning length: 1,519 mm Bar capacity: max. 102 mm Travel ranges: x1 axis: 675 mm y axis: +/- 150 mm z1 axis: 1,562 + 164 mm b axis: +/- 120° a axis: 1,542 mm x2 axis: 200 mm y2 axis: +/- 40 mm z2 axis: 1,542 mm Main Spindle: Max. speed: 3,000 rpm Drive power: 30/25 kW Torque: 1,194/995 Nm Spindle nose: JIS A2-8 Spindle bore: Ø 111 mm Sub Spindle: Max. speed: 4,000 rpm Drive power: 18.5/18.5/15 kW Torque: 599/505/409 Nm Spindle nose: JIS A2-8 Spindle bore: Ø 91 mm Milling Spindle: Speed range: 0 – 12,000 rpm Drive power: 28/23 kW Torque: 132/95.3 Nm Tool interface: Capto C6 Number of tool stations: 76 pos. Max. tool diameter: Ø 70/Ø 130 mm Max. tool length: 400 mm Max. tool weight: 8 kg Turret: Number of tool holders: 12 pos. Max. speed of driven tools: 12,000 rpm Tool interface: BMT40 Torque: 16.9 Nm Rapid traverse rates: x axis: 50 m/min y axis: 40 m/min z axis: 50 m/min a axis: 36 m/min x2 axis: 25 m/min y2 axis: 18 m/min z2 axis: 40 m/min b axis: 100 rpm Operating hours: approx. 4,500 h Spindle hours: approx. 2,200 h Features & Accessories: - Hydraulic 3-jaw chuck, make SMW KNCS-N-400-128 incl. hollow clamping cylinder for main spindle - Hydraulic 3-jaw chuck, make SMW KNCS-N-260-78-3Z incl. hollow clamping cylinder for sub spindle - Foot switch for chuck actuation - Automatic clamping stroke monitoring of the clamping cylinders for main and sub spindle - Tailstock function for the sub spindle - Magazine side control panel for tool magazine - Coolant: water-soluble coolant - Chip conveyor (discharge right) - Coolant temperature control/coolant chiller - Coolant spray gun - Float switch for coolant - Coolant shower at the chucks of main and sub spindle - Air blow-off system for chuck (sub spindle) - Oil mist separator zeroGOF #2 - Oil separator - ICS 70 bar, band filter system TMF300, tank 980 l - Manual tool presetting device for main and sub spindle - Direct measuring system on x1, x2, y, z1, z2 axes - Spindle sensor measuring system with radio transmission, make Renishaw RMP600 - Universal filter - 3D quickSET - Alternate speed cycle - Cycle ‘Tailstock tip on turret’ - MPC cycle – Machine Protection Control - MVC cycle – Machine Vibration Control - Synchronous threading without compensation chuck - Increased input resolution to 0.0001 mm - Cs control of tool spindle - Program restart Accessories, depicted tools and clamping devices are only included in the scope of delivery if expressly stated in the additional information. Specifications and details are subject to change and errors! Prior sale reserved.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 17004A, Strypo skersmuo (maks.): 20 mm, For sale: two fully operational TsugamiHS20M 5-axis . Everything is in working condition, recently serviced and technically checked. Included: various tool holders, full technical documentation. These machines were primarily used for manufacturing dental implants and were purchased from Sweden. If interested, please contact me for more details, photos, price, or to arrange an inspection. ---- Gsdpfx Ahoyghcrs Asit Продаю две полностью рабочие станки Tsugami HS20M 5-axis Всё функционирует, станки недавно обслужены и технически проверены. В комплекте: различные держатели инструмента (tool holders), полная техническая документация. Станки в основном использовались для производства зубных имплантов, куплены в Швеции. Если интересно — пишите, пришлю подробности, фото, цену или договоримся о просмотре.

Būklė: naudotas, CNC Vertical Machining Center FEHLMANN Type PICOMAX 60 CNC Control: HEIDENHAIN TNC 426 Serial No.: 14599641 Year of manufacture: 1999 Travel (X/Y/Z): 500 mm / 350 mm / 610 mm Feed rate: 1 - 20,000 mm/min Rapid traverse: 20 m/min Feed force: 12,000 N Clamping surface: 920 x 380 mm T-slots: 7 pcs, 12-H8 mm Max. table load: 250 kg Table height: 1004 mm Distance spindle nose – table: 94 – 704 mm Spindle overhang – column: 405 mm Spindle speed: 50 – 18,000 rpm, stepless Spindle drive: 10.2 kW (60% duty cycle) Max. torque: 70 Nm (up to 1240 rpm) Spindle taper: SK 30 / DIN 69871A Pull stud: DIN 69872 Drilling capacity in steel: 25 mm Milling capacity in steel / aluminium: 100 / 700 cm³/min Thread cutting in steel / aluminium: M20 / M24 Gsdpoy N Du Defx Ah Asit Tool changer: 24 positions Tool change time: approx. 6 sec. Chip-to-chip time: approx. 8 sec. Control: Heidenhain TNC 426 Power supply: 400 V, 50 Hz Connected load: 20 kW - Electronic handwheel Heidenhain HR410 - 3D probe Renishaw MP12 - Tool measurement system - TFT display - Linear direct measuring system - 200 L coolant unit external - Spindle cooling unit external - Central lubrication Vogel - Air supply: 6 bar, 40 – 200 l/min - Oil mist extraction - Operating hours: - Control on: 97,000 h - Machine on: 80,000 h - Program run: 42,000 h Dimensions (L x W x H): 2000 x 1700 x 3000 mm Weight: approx. 3.2 t Good condition

Būklė: naudotas, Gamintojas: WMZ / PITTLER, tipas: PVSL N1 2/2, pagaminimo metai: 2009, mašinos Nr.: ZN022, valdymas: Siemens Sinumerik 840D sl Powerline, įsk. rankinį ratuką, 2 verpstės, 2 darbo zonos, 2 kryžminiai stumokliai, maksimalus tekinimo skersmuo: 140 mm, maksimalus ruošinio aukštis: 80 mm, maksimalus verpstės apsukos: 6.300 aps./min, 2x 8 padėčių revolveriai, varomos įrankių stotys, drožlių transporterio Knoll, ištraukimo sistema ILT, recirkuliacinis aušinimo agregatas Hydac, ruošinio automatizavimas su žaliavų ir gatavų ruošinių sandėliu. Giedpjx Ahfwefx Ah Aot +++ Dėmesio: Staklės yra internetinio laisvo pardavimo dalis! +++

Būklė: geras (naudotas), Gamybos metai: 2009, Ref. No.: 10026 Manufacturer: SCHIESS Model: VMG4 MA90 Year of manufacture: 2009 Control type: CNC control Controller: Siemens Sinumerik 840 D Location: Halberstadt Country of origin: Germany Turning diameter: 5,000 mm Turning diameter over bed: 4,000 mm Spindle speeds: 0 - 120 rpm Clamping diameter: 4,000 mm Cross travel: 420 x 340 mm Workpiece height: 3,000 mm Main drive power: 52 kW Max. clamping force: 120,000 N Gsdpfx Aoy H Ebtjh Aoit Max. load capacity: 50 t Table drive power: 110 kW Planing plate max. torque: 100 kNm Additional information: Automatic tool changer with 80 positions (AAC) Automatic attachment changer for 6 milling heads Live spindle Table C-axis Travel of the Y-axis gantry columns Boring and milling head (master head principle) Straight boring and milling head GB-1B Renishaw RBP 60 probe system Handheld terminal Teleservice Internal and external coolant supply Operator cabin Chip conveyor SADDLE (X-AXIS): Horizontal travel from center to right: 4,800 mm Horizontal travel from center to left: 3,100 mm Vertical distance between saddle rails: 1,400 mm Speed / range: 0 - 16,000 mm / min GANTRY TRAVEL (Y-AXIS): Portal lift: 5,000 mm Feed rate: 0 - 16,000 mm / min RAM (Z-AXIS): Max. cutting force during turning: 60 kN Min. boring: entry 550 mm Guideway length: 1,600 mm Speed / feed range: 0 - 16,000 mm/min Spindle speeds: Range 1: 1 rpm Range 2: 0 - 1,100 - 3,150 rpm Spindle torque: Range 1: 2,400 - 2,400 - 850 Nm Range 2: 450 - 450 - 160 kNm

Būklė: labai geros būklės (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, For sale: Renowned brand CNC LATHE GILDEMEISTER CTX 310 V3 with live tooling and C-axis. _ Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 310 V3 Control: HEIDENHAIN 4290 + TURN PLUS Overlay Country of Manufacture: Germany Year of Manufacture: 1999 _ Machine Specifications: - Turret: 12 stations for VDI 30 tool holders (Every second station driven) - Max spindle speed: 6300 rpm - Max turning length (Z-axis): 455 mm - Max turning diameter (X-axis): 200 mm - C-axis - Live tooling - Main spindle chuck: Ø 200 mm - Max bar diameter: Ø 51 mm - Parts catcher - Coolant system Gisdpfjvmy Icox Ah Aet - Chip conveyor - Spindle drive power: 11 kW - Technical documentation (DTR) - Machine weight: 3.2 tons _ WHY IS IT WORTH BUYING MACHINES FROM PPM? - We operate our own stationary and mobile service - Over 700 DMG machines sold - Option for installation at the customer’s premises - Operator training and delivery included in the price - All our machines undergo a professional technical inspection – 100% ready for operation - Purchase possible via installment payments or leasing.

Būklė: naudotas, Gamybos metai: 2015, Turning diameter 250 mm Turning length 600 mm Control unit FANUC Series 31i-Model A Total power requirement 23 kW Machine weight approx. 7,7 t Space requirement approx. 2,880 x 2,130 x 1,990 mm CNC Turning and Milling Center SPINNER TTS 65 Triplex Year of manufacture: 2015 Control unit: FANUC Series 31i-Model A MACHINE DETAILS Turning diameter: 250 mm Turning length: 600 mm Travel - X axis: 180 mm Gjdpfx Ahey Ralns Asit Travel - Y axis: +/-45 mm Working range Z1, Z3 / Z2: 704 / 620 mm Rapid traverse: 30 m/min --- Main Spindle --- Spindle speed: 0 - 5,000 rpm Bar capacity: 65 mm Spindle drive power: 18 / 23 kW Torque: 151 Nm Spindle nose: DIN / A6 --- Sub Spindle --- Spindle speed: 0 - 7,000 rpm Bar capacity: 42 mm Spindle drive power: 16.5 / 22 kW Torque: 128 Nm Spindle nose: flat flange 110 mm --- Upper Turret 1 --- Position: top left in working area Number of tool stations: 12, all powered Tool holder: BMT 45 Independent axis travel: X1 / Y1 / Z1 --- Upper Turret 2 --- Number of tool stations: 12, all powered Tool holder: BMT 45 Independent axis travel: X2 / Z2 --- Lower Turret 3 --- Number of tool stations: 12, all powered Tool holder: BMT 45 Independent axis travel: X3 / Y3 / Z3 --- Tool spindle speed: 8,000 rpm Power: 4.3 kW Torque: 13.6 Nm Number of tool positions: 36 Axes: C1, C2, X1, X2, X3, Y1, Y3, Z1, Z2, Z3 --- Bar feeder: X-Files-S, Simple surface deposit, 300 mm (3 meters), Ø 10 - 65 mm Bar length: 3.2 m Bar feeder year: 2022 Weight: 2,200 kg --- Chip conveyor: TD/TTS with 15 bar, 13 bar = 10 l/min, with sedimentation filter Coolant tank capacity: 200 l --- CNC turning and milling center | SPINNER - TTS 65 Triplex equipped with main and sub spindle, both with C-axis, 3 triplex turrets for driven tools, and a bar feeder [Top Automazioni X-Files-S Series 3000 Version SX]. The machine has only 3,500 hours of machining time. The machine is in good condition and can be inspected under power. Supplied with numerous accessories/tools.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2019, tekėjimo ilgis: 700 mm, veleno skylė: 76 mm, X ašies eiga: 195 mm, Y ašies eiga: 100 mm, Z ašies eigos atstumas: 720 mm, CNC tekinimo staklės su Y ašimi HYUNDAI - LM1800TTSY Dvigubo veleno konstrukcija Dvigubos revolverio konfigūracija su Y ašimi (Y ašis: sudėtingų formų detalių apdirbimui) Integruotas veleno variklis Didelio standumo BMT revolveris Pilna 360° C ašis 45° įstrižinė lovos konstrukcija Pastaba: iliustracijos yra pavyzdinės, ne originalios nuotraukos! Maks. tekinimo skersmuo: 290 mm X ašis: 165/195 mm Y ašis: 100 mm Z ašis: 700/720 mm B ašis: 668° Veleno anga: 76 mm Veleno sūkių dažnis: 5000 aps./min Veleno galia: 22 kW Priešpriešinio veleno sūkių dažnis: 5000 aps./min Priešpriešinio veleno skersmuo: 76 mm Priešpriešinio veleno galia: 22 kW Įrankių keitiklis: 12 Varomų įrankių sūkių dažnis: 5000 aps./min Apatinio revolverio pozicijos: 12 Varomų įrankių greitis: 5000 aps./min Varomų įrankių galia: 6 kW Drožlių transporteris: Taip Gedpfx Ahox I Niks Aeit Tool Eye: Taip Ilgis: 3800 mm Plotis: 2000 mm Aukštis: 2100 mm Svoris: 8500 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, tekėjimo ilgis: 1 545 mm, sukimosi skersmuo virš skersinio stumduko: 660 mm, veleno skylė: 65 mm, X ašies eiga: 580 mm, Y ašies eiga: 160 mm, Z ašies eigos atstumas: 1 545 mm, Manufacturer: MAZAK Model: INTEGREX 200-4 ST Control: MAZATROL MATRIX Year of manufacture: 2007 Gsdsx S Hm Ispfx Ah Asit Multitasking machining in a single setup Sub-spindle for part transfer with full C-axis capability The INTEGREX-IV series can perform all machining processes completely High-speed milling spindle with swiveling function up to 240° Lower turret with driven tool spindle (live tooling) Chip conveyor with coolant system and 15-bar through-spindle coolant (IKZ) Double jaw chuck KNCS-N 210-53 (SMW Autoblok) MAZAK Flex-GL150F gantry loader Grip range: 200 × 120 mm (length) / 15 kg Max. turning diameter: 660 mm X-axis travel: 580 mm Y-axis travel: 160 mm Z-axis travel: 1545 mm B-axis swivel: 270° Spindle bore: 65 mm Spindle speed: 5000 rpm Spindle power: 22 kW Sub-spindle speed: 5000 rpm Sub-spindle through-hole: 65 mm Sub-spindle power: 18.5 kW Tool magazine: 40 positions B-axis interface: Capto C6 B-axis spindle speed: 12,000 rpm Length: 5200 mm Width: 2550 mm Height: 2600 mm Weight: 14,000 kg

Būklė: geras (naudotas), Gamybos metai: 2008, tekėjimo ilgis: 1 500 mm, tekėjimo skersmuo: 420 mm, Manufacturer: MAZAK Model: QTN 350 II MY Control: Mazatrol Matrix Nexus Year of manufacture: 2008 Specifications Metric US Standard Max. turning diameter: 420 mm X axis: 257 mm Y axis: 152 mm Z axis: 1607 mm Spindle bore: 102 mm Spindle speed: 3,300 rpm Spindle power: 30 kW Tool changer: 12 positions Driven tool speed: 4,000 rpm Driven tool power: 7.5 kW Quill taper: 5 Morse taper Quill stroke: 200 mm Dimensions (approximate) Length: 5,000 mm Width: 2,100 mm Height: 2,200 mm Weight: 8,600 kg Gsdpfx Ajwaikxeh Aoit Please note: The information on this page has been compiled to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith but accuracy cannot be guaranteed. Accordingly, these details do not constitute representations or contractual terms. We recommend verifying all important details.

Būklė: geras (naudotas), Manufacturer: MAZAK Model: Integrex 200-4 S Control: MAZATROL MATRIX Year of manufacture: 2010 Specifications Metric Maximum turning diameter: 660 mm X-axis travel: 580 mm Y-axis travel: 160 mm Z-axis travel: 1,045 mm B-axis: 225° Spindle bore: 82 mm Spindle speed: 5,000 rpm Spindle power: 18.5 kW Sub-spindle speed: 6,000 rpm Sub-spindle bore: 82 mm Sub-spindle power: 18.5 kW Tool changer capacity: 80 Driven tool speed: 12,000 rpm Gedpfx Aowpufgoh Aoit Dimensions (approximate) Length: 4,500 mm Width: 2,400 mm Height: 2,900 mm Weight: 9,200 kg Please note: The information provided on this page has been supplied to the best of our knowledge and, where possible, sourced from the manufacturer. All details are provided in good faith but accuracy cannot be guaranteed. As such, this description does not constitute any representation or terms of contract. We recommend that you verify all critical details independently.

Būklė: geras (naudotas), Gamybos metai: 2016, tekėjimo ilgis: 1 585 mm, ašies variklio galia: 22 000 W, veleno greitis (min.): 5 000 aps./min, X ašies eiga: 260 mm, Y ašies eiga: 1 585 mm, Z ašies eigos atstumas: 230 mm, bendras aukštis: 3 100 mm, bendras ilgis: 6 100 mm, bendras plotis: 3 230 mm, bendras svoris: 16 600 kg, Turning-milling center MAZAK - Integrex i-200ST x 1500U MACH-ID 9450 Manufacturer: MAZAK Model: Integrex i-200ST x 1500U Control: Smooth Mazatrol Year of manufacture: 2016 5-axis simultaneous EIA/ISO Milling spindle with thread-cutting function Additional M-Code (1 pair for 2 M-codes) RMP-60 preparation Sub-spindle with C-axis C1 + C2 synchronisation High-pressure coolant (IKZ) with 70 bar for main spindle High-pressure coolant (IKZ) with 15 bar for lower turret Gsdpfx Ahoyrcxlo Ajit Knoll Filtration KF-400/2300 SMW KNCS-N-325-104 3-jaw chuck Max. turning diameter: 658mm X-axis: 260mm Y-axis: 1585mm Z-axis: 230mm B-axis: 360° Spindle bore: 76mm Spindle speed: 5000 rpm Spindle power: 22kW Sub-spindle speed: 5000 rpm Sub-spindle bar capacity: 65mm Sub-spindle power: 22kW Tool magazine: 36 positions Driven tool speed: 12,000 rpm B-axis interface: HSK-63 Lower turret positions: 9 Driven tool speed (lower turret): 6,000 rpm Driven tool power: 5.5kW Length: 6100mm Width: 3230mm Height: 3100mm Weight: 16,600kg Please note: The information provided on this page is given to the best of our knowledge and, where possible, sourced from the manufacturer. The information is provided in good faith but accuracy cannot be guaranteed. Accordingly, these details do not constitute any representation or terms of contract. We recommend verifying all critical information independently.