Aciera Universalus Apdirbimo Centras pirkti naudotą (49 197)

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2017, veikimo valandos: 11 206 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 20170708, X ašies eiga: 670 mm, Y ašies eiga: 830 mm, Z ašies eigos atstumas: 600 mm, valdiklio modelis: Heidenhain 530, veleno greitis (maks.): 18 000 aps./min, A maintenance service was performed on this machine in April 2025. As part of this, the rotary union was replaced at a cost of €8,600! TECHNICAL DETAILS X-axis travel: 670 mm Y-axis travel: 830 mm Z-axis travel: 600 mm A-/C-axis swivel range: approx. -100 to +120° and -120 to +120° C-axis rotation range: 360° Table diameter: 800 mm T-slots (number x width): 9 x 90 mm Max. table load: 1,200 kg Kessler spindle: 18,000 rpm Max. tool length: 300 mm Max. tool diameter: 75 mm Max. tool diameter (adjacent stations empty): 125 mm Max. tool weight: 7 kg Tool change time: 3 s Rapid traverse X/Y/Z: 60 m/min Max. A-axis speed: 50 rpm Max. C-axis speed: 100 rpm Acceleration X/Y/Z: 7 m/s² Repeatability: 0.004 mm Positioning accuracy: 0.008 mm Rotation drive system: Integrated direct drives Tool holder: HSK 63 Tool magazine capacity: 96 MACHINE DETAILS Control: Heidenhain 530 Dimensions & Weight Weight: 19,000 kg Layout with accessories (L x W x H): 4,150 x 5,000 x 3,500 mm Tank capacity: max. 330 l Total coolant capacity: max. 425 l Operating hours Control on-hours: 20,248 h Machine on-hours: 19,424 h Program run time: 11,331 h Spindle hours: 11,206 h Dksdpfx Aey I Tvnjf Ael EQUIPMENT Spindle cooler Kessler rotary arm, swing diameter 800 mm, fully usable with zero-point clamping system Note: The probe is not included in the offer. The holders, however, are part of the offer.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2004, veikimo valandos: 61 082 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 2 800 mm, Y ašies eiga: 2 200 mm, Z ašies eigos atstumas: 800 mm, valdiklio modelis: HEIDENHAIN TNC 426, Įranga: drožlių transporteris, Important information: Auction extended by 14 days. The control system has been subsequently identified as a HEIDENHAIN iTNC 530. Previous specification: TNC 426. A new spindle was installed in January 2025! The machine has been regularly maintained! TECHNICAL DETAILS Travel range X-axis: 2,800 mm Travel range Y-axis: 2,200 mm Travel range Z-axis: 800 mm Feed rates Rapid traverse: 35,000 mm/min Spindle speed S1 (continuous operation) vertical: 10,000 rpm Spindle speed S1 (continuous operation) universal swivel head 2-axis: 18,000 rpm MACHINE DETAILS CNC Control: HEIDENHAIN iTNC 530 Electrical data Supply voltage: 400 V (–15 %, +10 %) Frequency: 50 Hz Current consumption: 101.1 A Installed total power: 59.8 kW Djdpfx Asy Dgyfof Aekl Operating hours Power-on hours: 98,755 h Program run: 61,082 h EQUIPMENT High-rigidity gantry construction Precision linear guides and ball screws Spacious working area with 2.8 m X-axis travel High feed rates for efficient machining Ideal for tool, mould, and mechanical engineering Documentation and acceptance certificate according to ISO standards Tool changer Cooling system Chip conveyor Interchangeable milling head with 4th/5th axis

Būklė: labai geros būklės (naudotas), Hello, I am offering for sale a Deckel Maho DMU 60T Machining Centre. Control: Heidenhain 430 Machine condition: Excellent Year of manufacture: 2000 Djdpfx Afsy Rb Dfj Askl Country of origin: Germany Machine specifications: - X-axis travel: 630 mm - Y-axis travel: 560 mm - Z-axis travel: 560 mm - Swivelling head - Maximum spindle speed: 18,000 rpm - Tool magazine: 24 tools (2x12 tools) - Heidenhain linear scales on all axes - Through-spindle coolant - Chip conveyor - High-pressure cooling system - Central lubrication - Hydraulic tool clamping - SK40 spindle taper - Complete programming manual Mechanical and electrical documentation included. Loading is included in the price. Stal-Com has been specialising in the sale, servicing, and training on CNC machines from the DMG group for 19 years. We specialise in all Gildemeister lathe models and Deckel Maho machining centres. All our machines undergo a meticulous technical inspection. In addition to customers from Poland, our machines are purchased by clients across Europe and some parts of Asia. Each machine can be inspected during production, as we also operate as a machining workshop. After purchasing a machine from us, we provide operator training and can assist in setting up workpiece production at the client’s facilities. We work with many companies on a long-term basis, supplying them with subsequent machine tools.

Būklė: naudotas, Gamybos metai: 2003, Funkcionalumas: ribota funkcionalumas, mašinos/transporto priemonės numeris: 3093-002, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, Profilio pjovimo centras, tik pjovimui. Frezavimo funkcijos neturi. Naudotas Kommerling 70, 76MD ir 88MD profiliams pjauti. Šiuo metu įrenginys supakuotas ir sandėliuojamas. Didžiausias įeinančio profilio ilgis: 6500 mm. Pjovimo kampai: 45°, 135° ir 90°. Etikečių spausdinimo galimybė. Pjovimas vykdomas iš .xml failo. Mažiausias ruošinio ilgis: 280 mm. Dedsyzdpljpfx Af Ajkl

Būklė: naudotas, Gamybos metai: 2014, Puikaus stovio, jungi ir dirbi Djdpeywhd Eefx Af Aokl

Būklė: geras (naudotas), Gamybos metai: 2001, Funkcionalumas: nepatikrintas, X ašies eiga: 350 mm, Y ašies eiga: 240 mm, Z ašies eigos atstumas: 340 mm, greitas poslinkis X ašimi: 20 m/min, valdiklio modelis: Siemens Sinumerik 840 D, bendras aukštis: 2 100 mm, bendras ilgis: 3 800 mm, bendras plotis: 3 600 mm, stalo apkrova: 100 kg, sukimosi greitis (maks.): 15 000 aps./min, bendras svoris: 1 600 kg, For sale is a 5-axis machining center from DMG, model DMU 35 M, equipped with two manual axes. The machine is in good condition. Technical Data: DMU 35 M Year of manufacture: 2001 X-axis: 350 mm Y-axis: 240 mm Z-axis: 340 mm Spindle speed: 15,000 rpm Feed rate: infinitely variable up to 5,000 mm/min Rapid traverse: 20 m/min Clamping area: Ø 400 x 280 mm Swiveling range: 360° (mechanical) Table clamping: +105° / -150° (mechanical) Max. table load: 100 kg Tool holder: SK 40 Tool clamping: pneumatic/mechanical Space requirement: 3,800 x 3,600 x 2,100 mm Transport dimensions: approx. 2,000 x 1,700 x 2,100 mm Weight: 1,600 kg Transport and loading can be organized throughout Europe for an additional fee upon request. All prices are subject to VAT. Dkedpsy Nz Nrsfx Af Ajl Inspection possible by appointment. Please contact us – our team will be glad to assist you! Trade-in or exchange is possible! Machinery Purchase/Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell your machine? For more information or contact options, please visit our website.

Būklė: naudotas, Gamybos metai: 1999, DECKEL MAHO - DMU 35 - 1999 - TNC310 - x/y/z = 350/240/340 mm Dsdsy Ic Igopfx Af Aokl - B+105°/-15° C360° - B+C rankinis - 5 000 aps./min. - SK40 - sugedęs B ašies enkoderis

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2003, Iš karto laisvas iš vietos: 5 ašių (3 plius 2) apdirbimo centras Deckel Maho Tipas DMU 35 M Metai: 2003 Siemens 810 D valdymas Elektroninis rankinis ratas Universalus stalas – pasukamas/sukamas stalas 400 x 290 mm Darbiniai eigos X/Y/Z 350/240/340 mm Tvirtinimas SK 40 Veleno apsukos 20 – 6300 aps./min Dsdpfx Aoy N Ad Rof Askl Variklio galia 6,3/10 kW Stalo apkrova 100 kg Sukimosi diapazonas 360 laipsnių Pakreipimo diapazonas +105/-15 laipsnių Atstumas nuo veleno galo iki stalo 145/485 mm Poslinkio greitis iki 3000 mm/min Svoris 1750 kg Kaina: 4.500 EUR + PVM, laisvas iš vietos

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2001, Iš karto laisvas vietoje: 5 ašių apdirbimo centras Deckel Maho Modelis DMU 50 M Metai: 2001 Valdymo sistema: Heidenhain TNC 124 5 ašys (3 + 2) Dedpey N Ad Defx Af Aokl Rankinės sukamųjų ašių B ir C pasukamos stalu B ir C ašys rodomos valdymo sistemoje Stalas 700 x 500 mm Važiavimo eiga X/Y/Z: 500 / 400 / 400 mm Stalo apkrova 200 kg Veleno tvirtinimas SK 40 Veleno apsukos 20–4500 sūkių/min Variklio galia 9 / 13 kW C ašies sukimosi diapazonas 360 laipsnių Sukimosi diapazonas +95 / –10 laipsnių Pajudėjimo greitis iki 5000 mm/min Veleno apsukos 20–4500 sūkių/min Masė: 3 t Aušinimo skysčio įranga Kaina: 8.500 EUR be PVM vietoje

Būklė: naudotas, Gamybos metai: 2003, veikimo valandos: 64 930 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 630 mm, Y ašies eiga: 560 mm, Z ašies eigos atstumas: 560 mm, valdiklių gamintojas: Heidenhain, valdiklio modelis: iTNC 530, stalo apkrova: 400 kg, sukimosi greitis (maks.): 12 000 aps./min, Užimamos vietos matmenys: apie 3,5 x 2,5 x 2,5 m (I x P x A, be drožlių transporterio) Staklių svoris: apie 6.300 kg Dkodpfx Aoy Ncnpof Ael

Būklė: geras (naudotas), Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 19859, X ašies eiga: 630 mm, Y ašies eiga: 560 mm, Z ašies eigos atstumas: 510 mm, nominali (akivaizdi) galia: 44 kVA, valdiklių gamintojas: MATSUURA, valdiklio modelis: G-TECH 31i, bendras aukštis: 3 200 mm, bendras ilgis: 7 000 mm, bendras plotis: 6 000 mm, sukamosios stalo skersmuo: 500 mm, bendras svoris: 15 000 kg, veleno greitis (maks.): 12 000 aps./min, įrankių magazino lizdų skaičius: 60, tvirtinimo skersmuo: 40 mm, įėjimo įtampa: 415 V, įėjimo dažnis: 50 Hz, įėjimo srovė: 62 A, Įranga: dokumentacija / vadovas, drožlių transporteris, MATSUURA NX-520 universalus apdirbimo centras - Įrankio tvirtinimas: SK 40 - A ašies eiga: nuo -125° iki +10° - C ašies eiga: 360° - 5 ašių NC sukamasis stalas: 500 mm skersmens - Įskaitant nuotraukose matomus įrankių laikiklius! - Įskaitant aušinimo skysčio sistemą, ištraukimo sistemą bei drožlių transporterį Dėmesio: nuotraukoje ant sukamiojo stalo matoma mašininė spaustuvė į komplektaciją neįeina! Dodpjy I Sq Rjfx Af Askl Dėmesio: įrenginys gali būti transportuojamas vilkiko kėbule iki 2500 mm pločio! Dėmesio: prekę būtina atsiimti privalomai per laikotarpį nuo 2026-08-24 iki 2026-08-27, laikas bus suderintas atskirai. FCA D-61352 Bad Homburg – pakrauta ant sunkvežimio

Būklė: geras (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 17405, X ašies eiga: 550 mm, Y ašies eiga: 410 mm, Z ašies eigos atstumas: 450 mm, greitas poslinkis X ašimi: 50 m/min, greitas poslinkis Y ašis: 50 m/min, greitasis eiga Z ašyje: 50 m/min, X ašies padavimo greitis: 50 m/min, Y ašies padavimo greitis: 50 m/min, padavimo greitis Z ašis: 50 m/min, nominali (akivaizdi) galia: 36 kVA, valdiklių gamintojas: MATSUURA, valdiklio modelis: G-TECH 840 DI, bendras aukštis: 3 500 mm, bendras ilgis: 6 000 mm, bendras plotis: 5 000 mm, bendras svoris: 15 000 kg, veleno greitis (min.): 50 aps./min, veleno greitis (maks.): 15 000 aps./min, įrankių magazino lizdų skaičius: 240, tvirtinimo skersmuo: 40 mm, įrankio ilgis: 300 mm, įrankio skersmuo: 80 mm, įrankio svoris: 10 000 g, įėjimo įtampa: 415 V, įėjimo dažnis: 50 Hz, įėjimo srovė: 50 A, Įranga: drožlių transporteris, MATSUURA MAN 72-25 V CNC Universal Machining Centre - Tool holder: SK 40 - B-axis travel: -110° / +110° - C-axis travel: 360° - Distance between pallet surface and spindle centerline: -20 to 430 mm Dsdpjy I Sfhefx Af Aekl - Distance between B-axis center and spindle centerline: 4 – 410 mm - Distance between B-axis center and spindle centerline: -10 mm - Distance between pallet centerline and bed zero point: 265 mm - Distance between pallet centerline and Y zero point: 180 mm - Spindle bearing inner diameter: 70 mm - Tool clamping force: 7.0 kN - B-axis feed: 30/min - C-axis feed: 50/min - Max. tool diameter: 80 mm, with adjacent stations empty: 150 mm The machine is equipped with a chip conveyor and a coolant system. Note: Includes the tool holders installed on the tool changer! Attention: The machine can be transported on a truck with a width of up to 2,700 mm! Attention: The item must be collected by binding appointment between 24.08. and 27.08.2026. Exact date to be coordinated. FCA D-61352 Bad Homburg – loaded onto truck.

Būklė: geras (naudotas), Gamybos metai: 2010, Ref. No.: 10530 Manufacturer: DöRRIES - SCHARMANN Model: Alpha 1000 Year of manufacture: 2010 Control type: CNC Control system: Siemens SINUMERIK 840 D Location: Halberstadt Country of origin: Germany X-axis travel: 2000 mm Y-axis travel: 2000 mm Z-axis travel: 2000 mm A-axis: 0 - 90 x 0.001° B-axis: 360 x 0.001° Number of T-slots: 1 + 8 Max. workpiece weight: 5000 kg T-slot width: 22 mm T-slot pitch: 100 mm T-slots: DIN 650 mm Tool holder: HSK-A 100 Tool magazine with: 207 + 10 pcs. Max. torque: 1250 Nm Feed rates (X/Y/Z axis): 1 - 30,000 mm/min Rapid traverse (X/Y/Z): 30.00 mm/min Dkedpfx Afey Ed Ehe Asl Main spindle drive power: 45 kW Total power requirement: 100 kW Space requirement approx.: 13 x 8 x 4.5 m Pallet size (LxW): 2 x 1000 x 1000 mm Spindle speed gear stage 1: 1 - 1096 rpm Spindle speed gear stage 2: 1096 - 6000 rpm Additional information: - Touch probe - Chip conveyor - Coolant system - Coolant through spindle - Pallets with 5-fold media interface and hydraulic clamping - Extraction unit - Swivel spindle A-axis 0 - 90° - NC rotary table B-axis

Būklė: naudotas, Gamybos metai: 2011, Technical Details: Dkedpewlhvwsfx Af Ael X-axis travel: 410 mm y-axis travel: 610 mm z-axis travel: 500 mm Spindle speed: 15,000 rpm Spindle taper: SK 40 Control: iTNC 530 HEIDENHAIN smart NC Table size: 320 x 320 mm Table load capacity: 100 kg Tool changer: 48 positions Total power requirement: 35 kVA Machine weight approx.: 7.4 t Space requirement approx.: 4.15 x 3.8 x 3.28 m 5-axis simultaneous machining centre, NC rotary tilting table, C-axis 360°, B-axis +30-120°, Chip conveyor, Coolant through spindle, 20 bar, 3D touch probe, KinematicsOpt, electronic handwheel, Operating hours: approx. 9,600 h "Machine ON", approx. 3,500 spindle hours

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2014, Immediately available: Gantry-type machine FS 2100 • Total travel range X = 21,000 mm, ideal for flexible large-part machining • Travel ranges: X = 21,000 mm, Y = 1,500 mm, Z = 3,500 mm • iTNC 530 control system with wireless handwheel HR 550 FS, operator’s cabin mounted on the gantry • 2-axis NC universal boring and milling head, full simultaneous and positioning operation for each gantry • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque • ICS air up to 6 bar • Dust protection packages for guidance and drive protection • 4 work stations per gantry • Wireless probe RMP 60 by Renishaw • Work area monitoring with network camera and monitor at the rear of the unit • Process monitoring ToolScope base system • Additional control panel at the rear of the machine • Partial enclosure consisting of machining compartment and sheet metal door, rear with protective fence for direct view into workspace • Includes fixators • Cooling aggregates • Includes internal tool cooling (closed cooling circuit) with chiller • Short delivery time, available immediately — subject to prior sale — Viewing by appointment possible Dsdpfx Aey Nbvxef Ajkl Spindle hours: approx. 9,079 SPECIAL PRICE!

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2014, Immediately available travelling column machine FS 1200 • Total travel X = 12,000 mm, ideal for flexible large-scale machining • Travel distances: X = 12,000 mm, Y = 1,500 mm, Z = 3,500 mm • iTNC 530 control with wireless handheld unit HR 550 FS, operator cabin on the travelling column • 2-axis NC universal drilling and milling head, fully simultaneous and positioning operation per column • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque • ICS air supply up to 6 bar • Dust protection packages for protecting the guides and drives • BA 4 per travelling column • Wireless measuring probe RMP 60, manufacturer: Renishaw • Work area monitoring with network camera and monitor at the rear of the system • Process monitoring ToolScope basic system • Additional control panel at the rear of the system • Partial enclosure consisting of machining area and steel door, rear side with protective fence offering clear view of the machining area • Incl. mounting feet • Cooling units • Incl. internal tool cooling (closed cooling circuit) with chiller Dsdpfxoy Nbvre Af Askl • Short delivery time, immediately available — subject to prior sale — Viewing by appointment possible Spindle hours: approx. 9,079 SPECIAL PRICE!

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2014, Immediately Available Gantry-type Machine FS 480 • Total travel X = 4800 mm, ideal for flexible machining of large parts • Travel paths: X = 4,800 mm, Y = 1,500 mm, Z = 3,500 mm • iTNC 530 controller with wireless HR 550 FS handwheel, operator cabin on the gantry • 2-axis NC universal drilling and milling head, simultaneous and positioning operation per gantry • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque • ICS air up to 6 bar • Dust protection packages for protecting guides and drives • BA 4 per gantry • Wireless probe RMP 60, manufacturer: Renishaw • Work area monitoring with network camera and monitor at the rear of the machine • Process monitoring ToolScope basic system • Additional control panel at the rear of the machine • Partial enclosure, consisting of work area and sheet metal door; rear with protective fence and clear view into the workspace • Incl. fixators • Cooling units • Incl. internal tool cooling (closed cooling circuit) with cooling unit • Short delivery time, immediately available, ---subject to prior sale--- Inspection possible by appointment Dsdpfx Afjy Nbu Io Aokl Spindle hours: approx. 9,079 SPECIAL PRICE!!

Būklė: naudotas, Gamybos metai: 2009, Technical Details: X-travel: 600 mm Y-travel: 770 mm Z-travel: 675 mm Total power requirement: 47 kW Approx. machine weight: 13 t Dsdsqy Sr Sopfx Af Ajkl Tool holder: HSK-A63 Number of tool stations in magazine: 40 Including additional tool magazine ZM 182 1 spindle, 5 axes

Būklė: naudotas, Gamybos metai: 2009, x-eiga 800 mm Dodpfx Asy Hxrrsf Aekl y-eiga 700 mm z-eiga 550 mm Valdymas: Heidenhain TNC 530 Universalus 5 ašių apdirbimo centras DMG DECKEL MAHO DMU 80 monoBlock Metai: 2009 Valdymas: Heidenhain TNC 530 Eigos X 800 mm Y 700 mm Z 550 mm Įrankių keitiklis: 32 įrankiai / 2 x diskų žurnalas po 16 vietų kiekvienoje

Būklė: labai geros būklės (naudotas), Gamybos metai: 2016, veikimo valandos: 10 250 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 800 mm, Y ašies eiga: 800 mm, Z ašies eigos atstumas: 550 mm, greitas poslinkis X ašimi: 60 m/min, greitas poslinkis Y ašis: 60 m/min, greitasis eiga Z ašyje: 60 m/min, stalo plotis: 800 mm, stalo ilgis: 630 mm, stalo apkrova: 1 400 kg, bendras svoris: 12 500 kg, veleno greitis (min.): 20 aps./min, veleno greitis (maks.): 18 000 aps./min, veleno veikimo valandos: 10 250 h, aušinimo skysčio tiekimas: 80 juosta, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, For sale: Hermle C42U Dynamic in immaculate condition. Travel paths: X: 800 mm Y: 800 mm Z: 550 mm A: +/-130 degrees C: 360 degrees Equipment: Control: Heidenhain TNC 640 Spindle interface: HSK-A63 Spindle speed: 18,000 rpm Large machine table: 800 mm x 630 mm Dsdsyma Nkjpfx Af Askl Swiveling rotary table with tandem drive C-axis with torque drive Linear axes — Dynamic version Internal coolant supply (IKZ) 80 bar with variable valve Scraper belt conveyor Extended tool changer plus Additional magazine ZM50 for a total of 92 tool positions Manual cabin door Manual cabin roof Laminated safety glass window Comfort operator panel External minimum quantity lubrication Tool measurement A2 Blum (breakage / tool measurement) 3D probe M&H Internal air blast External air blast Bed flushing Handte Compact extraction unit Electronic handwheel Purge air for glass scales Electronic thermal compensation with controller functions HIMS basic package Special stop block Interpolation turning TNC 640 Rotoclear visual aid and much more… The machine can be inspected under power by prior arrangement. The machine is available immediately! Loading of the machine will be carried out by us!

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, veikimo valandos: 29 000 h, Funkcionalumas: visiškai funkcionalus, MANDELLI Storm 2500 Horizontal Machining Center / Flexible Manufacturing Cell Manufacturer: Mandelli Sistemi S.p.A. Model: Storm 2500 Type: U 42 / 8000 Serial No.: XXXX Year of Manufacture: 2008 Country of Origin: Italy CNC Control: Siemens Sinumerik 840D System Control: CswWin / Beckhoff industrial PC Condition / Maintenance: Very good / Single-shift use / Barely used hours Technical Data: X-axis travel: 2,600 mm Y-axis travel: 1,500 mm Z-axis travel: 1,800 mm B-axis: 360,000 positions / continuous APC / pallet axis: 360,000 positions Rapid traverse linear axes: 35 m/min B-axis speed: 8 rpm Accuracy according to VDI 3441: Positioning accuracy P: 10 µm Repeatability Ps: 5 µm Spindle / Head: U-head horizontal / vertical Spindle taper: ISO SK 50 Speed range: 37 – 6,000 rpm Spindle power: 44 kW Max. torque: 706 Nm Dedpfey H D R Tjx Af Aokl Tool Magazine: 208 tool pockets Rack-type tool magazine with automatic tool handling Max. tool length: 600 mm Max. tool diameter: 450 mm Max. tool weight: 35 kg Pallet System: Front transpallet / automatic pallet changer system 6 pallets, each 1,000 x 1,250 mm 4 fixed stations Rotary unit for loading and unloading workpieces Electrical Data (according to machine plate): System: S2500 / 840D Rated voltage: AC 400 V, 3 Ph / PE Frequency: 50 Hz Current at full load: 178 A AC auxiliary voltage: 230 V DC auxiliary voltage: 24 V Standard: IEC 60204-1 / EN 60204-1 Chip Conveyor: Manufacturer: Meta Year of Manufacture: 2007 Weight: approx. 1,100 kg Additionally, screw conveyor in machining area visible. Equipment / Peripheral Devices: Filter system Hydraulic power unit Chip conveyor Screw conveyor COSEMA peripheral unit Electrical cabinet Coolant and lubrication system peripherals Separate operator panel Comprehensive pallet system Clamping Devices / Fixtures: Several heavy-duty angle plates, fixture plates, grid plates, customer-specific clamping devices and pallet setups available. Tools / Accessories: Numerous SK50 tool holders, boring bars, boring tool holders, milling tool holders, drill and reaming tool holders, extensions, adapters as well as other spare and standard tools are visible. Several hundred additional tool holders can be purchased separately on request. Optional / On Request: Apfel tool storage cabinets with extensive tool inventory Additional clamping devices and fixtures ELBO CONTROLLI tool presetting device Workbenches / tool racks / shelving systems by arrangement The machine is in good, production-ready condition. This is a heavy-duty horizontal machining cell for flexible complete machining of large and complex workpieces. The working area shows normal signs of use from productive heavy machining operations. The system must be removed from the plant in June 2026. Earlier availability upon agreement. Inspection under power is possible by arrangement. All information is provided to the best of our knowledge. Subject to errors, prior sale, and technical changes.

Būklė: naudotas, Gamybos metai: 2014, X eiga: 1.100 mm Y eiga: 610 mm Z eiga: 610 mm Dkodpfx Asy N D E Nof Ael B ašis: -30 / +120 ° C ašis: 360 x 0,001 ° Atstumas nuo veleno iki stalo: 105–715 mm Stalo matmenys: 1100 x 610 mm Įrankio laikiklis: SK40 Veleno greitis – bepakopis: 14.000 aps./min. Detalės svoris: 500 kg Valdymas: iTNC530 Mašinos svoris: apie 9 t

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Deckel Maho DMG DMU 50 eVo linear Baujahr: 2008 CNC-Steuerung: Heidenhain iTNC 530 Achsen Verfahrweg X-Achse mm: 500 Verfahrweg Y-Achse mm: 450 Verfahrweg Z-Achse mm: 400 C-Achse Grad: 360º (0,001) B-Achse Grad: 0º/108º (0,001) Eilgang m/min: 80/50/50 NC-Rundtisch/ Fräs-/Drehtisch: Tischabmessungen mm: Ø390 Maximale Werkstückgröße (D x H) mm: Ø630x500 Max. Werkstückgewicht kg: 200 Spindel Spindeldrehzahl U/min: 18000 U/min Spindelantriebsleistung kW: 35/25 (40%ED/Dauer) Spindelmoment Nm: 130/87 Kühlung Kühlmittelzufuhr durch die Spindel: 40 bar Werkzeugsystem Werkzeugaufnahme: SK40 Werkzeugmagazinplätze: 30 Mit freien Nachbarplätzen mm: 130 Mit belegten Nachbarplätzen mm: 80 Max. Werkzeuglänge mm: 300 Span-zu-Span-Zeit s: 5 Gewicht: 5.900 kg Zubehör/Optionen: - Späneförderer - Blum Messtaster - Blum Lasermesssystem zur Längen- und Durchmessermessung der Werkzeuge - Programmierbare Kühlmitteldüsen - Wärmekompensator - Direktes Messsystem XYZ - Schaltschrank mit aktivem Kühlgerät - Kühlmitteltank mit Hochdruckpumpe, Papierband-Filteranlage - Mit 25 Werkzeughaltern, Typ SK40 - Vollständige Dokumentation Dsdpfxsy Ap D De Af Aokl Unter Strom in unserem Lager! Video auf Anfrage verfügbar!

Būklė: geras (naudotas), Gamybos metai: 2012, Control: Heidenhain iTNC 530 Working area: 800 mm x 1020 mm x 970 mm (X/Y/Z) Table dimensions: 630 x 630 mm Table load capacity: 700 kg Maximum workpiece diameter: 900 mm Rotary table (A/B axis) A-axis: -185° / +45° B-axis: 360° Total power requirement: 42 kVA Dksdjrx N Tzopfx Af Aol Machine weight approx.: 22 t Chip conveyor Belt filter system Motor spindle: 16,000 rpm Drive power: 25/35 kW Max. torque: 160/223 Nm Spindle interface: HSK-A63 Tool changer: 120 positions - Probe - Kinematics package - Tool length measurement system - BLUM laser measuring system for tool monitoring - Electronic handwheel - Extraction system - 80 bar coolant through spindle system

Būklė: labai geros būklės (naudotas), Gamybos metai: 2015, veikimo valandos: 19 600 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 3 000 mm, Y ašies eiga: 1 200 mm, Z ašies eigos atstumas: 1 500 mm, valdiklių gamintojas: Heidenhain, valdiklio modelis: 530, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, mašina yra geros būklės 5 ašių sinchroninis apdirbimas Apvalus stalas: 1700 mm Stalo apkrova: 6–9 tonų Veleno valandos: 9000 h Dkodjytt Elopfx Af Ael