Universalus apdirbimo centras
Mandelli Storm 2500

Name: Mandelli Storm 2500
Brand: Mandelli
Availability: InStock

Gamybos metai

2008

Būklė

Naudotas (visiškai funkcionalus)

Vieta

Sankt Leon-Rot Vokietija

Universalus apdirbimo centras Mandelli Storm 2500

Duomenys apie mašiną

Mašinos pavadinimas:: Universalus apdirbimo centras

Gamintojas:: Mandelli

modelis:: Storm 2500

Gamybos metai:: 2008

Būklė:: labai geros būklės (naudotas)

Funkcionalumas:: visiškai funkcionalus

Darbo valandos:: 29 000 h

Kaina ir vieta

Vieta:: Lanzstraße 6, 68789 Sankt Leon-Rot, Deutschland

Skambinti

Pasiūlymo informacija

Skelbimo ID:: A21815198

Atnaujinimas:: paskutinį kartą atnaujinta 29.04.2026

aprašymas

MANDELLI Storm 2500 Horizontal Machining Center / Flexible Manufacturing Cell

Manufacturer: Mandelli Sistemi S.p.A.
Model: Storm 2500
Type: U 42 / 8000
Serial No.: XXXX
Year of Manufacture: 2008
Country of Origin: Italy
CNC Control: Siemens Sinumerik 840D
System Control: CswWin / Beckhoff industrial PC
Condition / Maintenance: Very good / Single-shift use / Barely used hours

Technical Data:
X-axis travel: 2,600 mm
Y-axis travel: 1,500 mm
Z-axis travel: 1,800 mm
B-axis: 360,000 positions / continuous
APC / pallet axis: 360,000 positions
Rapid traverse linear axes: 35 m/min
B-axis speed: 8 rpm

Accuracy according to VDI 3441:
Positioning accuracy P: 10 µm
Repeatability Ps: 5 µm

Spindle / Head:
U-head horizontal / vertical
Spindle taper: ISO SK 50
Speed range: 37 – 6,000 rpm
Spindle power: 44 kW
Max. torque: 706 Nm

Tool Magazine:
208 tool pockets
Rack-type tool magazine with automatic tool handling
Max. tool length: 600 mm
Max. tool diameter: 450 mm
Max. tool weight: 35 kg

Pallet System:
Front transpallet / automatic pallet changer system
6 pallets, each 1,000 x 1,250 mm
4 fixed stations
Rotary unit for loading and unloading workpieces

Electrical Data (according to machine plate):
System: S2500 / 840D
Rated voltage: AC 400 V, 3 Ph / PE
Frequency: 50 Hz
Current at full load: 178 A
AC auxiliary voltage: 230 V
DC auxiliary voltage: 24 V
Standard: IEC 60204-1 / EN 60204-1

Chip Conveyor:
Manufacturer: Meta
Year of Manufacture: 2007
Weight: approx. 1,100 kg
Additionally, screw conveyor in machining area visible.

Equipment / Peripheral Devices:
Filter system
Hydraulic power unit
Chip conveyor
Screw conveyor
COSEMA peripheral unit
Electrical cabinet
Coolant and lubrication system peripherals
Separate operator panel
Comprehensive pallet system

Clamping Devices / Fixtures:
Several heavy-duty angle plates, fixture plates, grid plates, customer-specific clamping devices and pallet setups available.

Tools / Accessories:
Numerous SK50 tool holders, boring bars, boring tool holders, milling tool holders, drill and reaming tool holders, extensions, adapters as well as other spare and standard tools are visible. Several hundred additional tool holders can be purchased separately on request.

Optional / On Request:
Apfel tool storage cabinets with extensive tool inventory
Additional clamping devices and fixtures
Ksdpfx Afey H D R Tj Hjdr
ELBO CONTROLLI tool presetting device
Workbenches / tool racks / shelving systems by arrangement

The machine is in good, production-ready condition. This is a heavy-duty horizontal machining cell for flexible complete machining of large and complex workpieces. The working area shows normal signs of use from productive heavy machining operations.

The system must be removed from the plant in June 2026. Earlier availability upon agreement. Inspection under power is possible by arrangement.

All information is provided to the best of our knowledge. Subject to errors, prior sale, and technical changes.

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.

Tiekėjas

Paskutinį kartą prisijungęs: praėjusią savaitę

Registruotas nuo: 2011

21 Skelbimai internetu

Skambinti

Siųsti užklausą

Telefonas & Faksas

+49 6227 ... skelbimai

Šie skelbimai taip pat gali jus sudominti.

Mažas skelbimas

ACCURA II MASS 16/42/15 Zeiss ACCURA II MASS 16/42/15

Weilheim an der Teck

1 221 km

ACCURA II MASS 16/42/15
ZeissACCURA II MASS 16/42/15

Skambinti

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2013, matavimo diapazonas X ašis: 1 600 mm, matavimo diapazonas Y ašis: 4 200 mm, matavimo diapazonas Z ašis: 1 500 mm, ruošinio svoris (maks.): 5 000 kg, Įranga: Tipinė plokštelė prieinama, CARL ZEISS CNC koordinatinė matavimo mašina ACCURA II MASS 16/42/15 Pagaminimo metai: 2013, atnaujinta: 2025 Matavimo diapazonas: X = 1600 mm, Y = 4200 mm, Z = 1500 mm Valdymo sistema: C99 SR VII Valdymo pultas: BP26_SE Daviklis: VAST XT GOLD ir RDS-CAA su VAST XXT Keičiamų daviklių laikiklis: Multi Sensor Rack MSR Automatinė temperatūros kompensacija Tikslumas: VAST XT GOLD / RDS-CAA XXT MPE-E 3,6+L/300 4,9+L/200 R0 2,4 5,5 MPE-P 3,6 4,9 Kedpfsydnzcox Af Hodr MPE-THP 3,7/68 sek. 4,7/68 sek. RONt 3,5 5,5 HP Z4 WIN11 darbo stotis su 27" monitoriumi „Calypso Basic“ naujausia versija Galimos ir kitos papildomos funkcijos Priedai: Kalibravimo rutulys Keičiami antgaliai XT ir XXT Keičiamų antgalių laikiklio vietos Antgalių priedai Dokumentacija Kiti priedai

Peržiūrėti detales

Mažas skelbimas

CNC tekinimo ir frezavimo centras DMG MORI SEIKI NT 4300/1500 SZ

Hilden

1 212 km

CNC tekinimo ir frezavimo centras
DMG MORI SEIKINT 4300/1500 SZ

Skambinti

Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, x-travel: 750 mm y-travel: 210 mm z-travel: 1150 + 100 mm Control: Fanuc MSX-701III Max. turning diameter: 660 mm Max. turning length: 1498 mm Swing diameter over cross slide: max. 400 mm Spindle speed: 3000 rpm Tool magazine with 40 positions Turret with 10 positions Total power requirement: 90 kVA Machine weight: approx. 26.6 t Space required: approx. 5301 x 2997 x 2788 mm Capacity: Swing diameter over cross slide (Tool spindle 1): 750 mm Swing diameter over cross slide (Turret 2): 400 mm Max. turning diameter (Tool spindle 1): 660 mm Max. turning diameter (Turret 2): 275 mm Max. machined workpiece length: 1498 mm Max. bar material: 90 mm Travel axes: X1 axis (Tool spindle): 750 mm Y axis (Tool spindle): 420 (+/- 210) mm Kdodpjy Spuuofx Af Her Z1 axis (Tool spindle): 1635 + 100 mm for tool change B axis (Tool spindle): +/- 120°, full B-axis indexed at 1° and locked at 0.0001° X2 axis (Turret): 195 mm Z2 axis (Turret): 1525 mm SZ axis (Sub-spindle): 1610 mm Rapid traverses: (X1, Z1) 50 m/min / (Y, X2, Z2, SZ) 30 m/min Main and sub-spindle: Infinitely variable spindle speeds (Spindle 1 + 2): 30–3000 rpm C-axis (Spindle 1 + 2): 0.001° Main spindle motor: 22/18.5 kW Sub-spindle motor: 22/18.5 kW Torque (Spindle 1 + 2): 1000 Nm Disc Turret: Number of tool positions: 10 Speed of driven tools: 6000 rpm Drive power: 5.5/3.7 kW Milling spindle: Tool holder: HSK A63 Max. speed: 12,000 rpm Drive power: 18.5/11 kW Torque: 120/44 Nm Tool changer: 40-position Tool diameter: 70/140 mm Tool length: 400 mm Tool weight: 8/10 kg Total power requirement: 90 kVA Overall dimensions (L x W x H): 5301 x 2997 x 2788 mm Machine weight: 26.6 t Equipment/Accessories: - Upper milling spindle (B-axis), as full fourth axis, positioning 0.0001° - 40-position tool magazine - 10-position lower turret, all stations driven - 2 x 3-jaw quick-change chuck KNCS-N 315/91 - KNOLL high-pressure coolant system, selectable pressure 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system - Chip conveyor - Blow-off system for main spindle chuck (controlled via M function) - Blow-off system for tool cutting edge (controlled via M function) - Coolant gun incl. accessories - Oil mist extraction - Direct measuring system X1, X2, Y-axis - Bar feeder interface - Double foot switch for both spindles - Islands and pocket programming for MAPPS - High speed fixed cycle for MAPPS - Program memory expansion to 8 MB - Program restart - 3-stage signal lamp - 512 MB memory card (CF Card) - Measuring arm (image) Tool measurement in the machine - Tool holder + box, reduction sleeves, driven tools - Set of clamping jaws - Set of collets

Peržiūrėti detales

Mažas skelbimas

CNC lovos tipo frezavimo staklės Juaristi - ML-3 Juaristi ML-3

Babberich

1 224 km

CNC lovos tipo frezavimo staklės Juaristi - ML-3
JuaristiML-3

Skambinti

Būklė: labai geros būklės (naudotas), Gamybos metai: 2020, X ašies eiga: 8 000 mm, Y ašies eiga: 1 300 mm, Z ašies eigos atstumas: 2 500 mm, greitas poslinkis X ašimi: 35 000 m/min, greitas poslinkis Y ašis: 40 000 m/min, greitasis eiga Z ašyje: 40 000 m/min, bendras plotis: 5 800 mm, bendras aukštis: 4 500 mm, bendras ilgis: 13 500 mm, stalo ilgis: 10 000 mm, stalo plotis: 1 250 mm, Travelling column – high performance, precision, and machining capability Linear RAM guide combined with hydrostatic HDS guide ACD2 milling head with 5,000 rpm and 1,400 Nm torque Aitek ATC chain magazine with 60 positions, L = 400 and Ø 250, max. 35 kg Filtration with through-spindle coolant at 15 bar Chip conveyor BLUM 3D measuring probe Kodpfeyr Dmdsx Af Hsdr Wide bed, linearly guided on the X-axis, traverse path W = 930 mm Rotary table drive pre-installed in electrical cabinet X-Axis: 8,000 mm Y-Axis: 1,300 mm Z-Axis: 2,500 mm Table length: 10,000 mm Table width: 1,250 mm Spindle power: 40 kW Spindle speed: 5,000 rpm Tool holder: ISO 40/BT/MK X-axis feedrate: 35,000 mm/min Y-axis feedrate: 40,000 mm/min Z-axis feedrate: 40,000 mm/min Milling head auto-indexing: 0.001 x 0.001 deg Operating hours: 3,800 h Length: 13,500 mm Width: 5,800 mm Height: 4,500 mm Weight: 45,000 kg Please note: The information on this page was provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Consequently, these details do not constitute representation or contractual terms. We recommend verifying all critical details.

Peržiūrėti detales

Mažas skelbimas

Judančios kolonos frezavimo staklės FPT Industrie VERUS

Montichiari

1 443 km

Judančios kolonos frezavimo staklės
FPT IndustrieVERUS

Skambinti

Būklė: naudotas, Gamybos metai: 2007, X ašies eiga: 6 000 mm, Y ašies eiga: 2 000 mm, Z ašies eigos atstumas: 1 250 mm, sukimosi greitis (maks.): 5 000 aps./min, SPINDLE MOUNT ISO 50 TRAVEL X AXIS MM 6000 SLIDE TRAVEL Z AXIS MM 1250 VERTICAL TRAVEL Y AXIS MM 2000 SPINDLE SPEED RPM 5000 FEEDS MM/MIN 8000 SPINDLE MOTOR POWER KW 37 CNC HEIDENHAIN iTNC 530 REMOTE CONTROL PANEL Kdodpfowz H Rfox Af Her STOLLE TABLE 7000x2000 WITH 15 TON/M² CAPACITY RAISED TABLE 1080 X 7220 X H 820 MM TOOL CHANGER WITH 40 POSITIONS CHIP CONVEYOR CONTINUOUS POSITIONING HEAD TUPC 0.001°x0.001° INTERNAL SPINDLE COOLING 20 bar RTCP FUNCTION FPT AUTOCAL EXTERNAL HIGH AND LOW PRESSURE COOLANT TANK WITH PAPER FILTER NO. 2 AUTOMATIC HORIZONTAL DIVIDERS WITH NO. 2 SUPPORT TABLES NO. 1 WORKPIECE PROBE

Peržiūrėti detales

Mažas skelbimas

Cilindrinė šlifavimo mašina Mägerle AG Maschinenfabrik MFP50.65.65 - 5-Achs

Elchingen

1 204 km

Cilindrinė šlifavimo mašina
Mägerle AG MaschinenfabrikMFP50.65.65 - 5-Achs

Skambinti

Būklė: geras (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 6860 0007, Please let us know your offer price. Sale only within the European Union (EU), including Switzerland, Turkey, and the United Kingdom. Scope of delivery: Kedpfxevbgiio Af Hsdr Machine, loading system, conveyor belt, workpiece carrier Machine technical data: 5-axis grinding center including oval feed belt and loading gantry 12-position tool changer with HSK 63 Maximum travel X-axis: 500 mm Maximum travel Y-axis: 650 mm Maximum travel Z-axis: 650 mm Table size: 500 x 650 mm Profile detection Nordmann dressing spindle Oil supply via central factory supply

Peržiūrėti detales

Mažas skelbimas

Plokštės gręžimo staklės - Horizontaliosios PAMA 2/TR 8

Vokietija

999 km

Plokštės gręžimo staklės - Horizontaliosios
PAMA2/TR 8

Skambinti

Būklė: geras (naudotas), Gamybos metai: 2007, Valdymas 840 D x ašis 2500 mm Kdodpfxewzyp Uj Af Hsr y ašis 2500 mm z ašis 1700 mm Valdymo sistema - Siemens Sinumerik 840 D maks. ruošinio svoris - 6000 kg Veleno skersmuo - 130 mm Pinolės eiga - 700 mm Įrankio laikiklis - ISO 50 DIN 69871 - AD maks. sukimo momentas ant veleno - 1847 Nm Bendras galios poreikis - 65 kW Staklių svoris apie 45 t Užimamas plotas apie 10,9 x 9,3 x 5,7 m

Peržiūrėti detales

Mažas skelbimas

Keliaujanti kolonų frezavimo mašina Soraluce FL8000

Blintendorf

1 149 km

Keliaujanti kolonų frezavimo mašina
SoraluceFL8000

Skambinti

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2014, Siemens 840 D Pasukama valdymo konsolė su SIEMENS 840 D Solution Line valdymu. Eigos kelias X 8000 mm Eigos kelias Y 1300 mm Eigos kelias Z 2200 mm Įrankių sistema SK 50; Capto C8 Pagrindinis velenas 20–4000 aps./min. 3D mašinos tūrio modelis HEIDENHAIN matavimo sistema visose ašyse. Automatinis centrinis tepimas su slėgio ir laiko kontrole visoms ašims ir judėjimo elementams. Matavimo jutiklių sistema RENISHAW RMP60 M Įrankio lūžio kontrolė per matavimo galvutę BRANKAMP CMS susidūrimo stebėjimo sistema su dviem matavimo kanalais: FIBRO sukamojo fiksatoriaus centrų aukštis 1100 mm FIBRO sukamojo fiksatoriaus centrų atstumas 900–3000 mm Maks. apsisukimo Ø FIBRO sukamojo fiksatoriaus 2200 mm FIBRO karuselinio stalo D=1600; 250 aps./min. Karuselinio stalo FIBRODYN 1600 mm: Stalo plotas 6000x2000 mm d‘Andrea slankiklis Universalus frezos galva Automatinis įrankių keitiklis Kdodpfx Afow Syv Ue Hsr ATC, 80 vietų žurnalas M versijoje: 3 frezos galvos vietos, Aukšto slėgio siurblys 30 bar Darbo valandos 4261 h

Peržiūrėti detales

Mažas skelbimas

Apdirbimo centras DECKEL MAHO DMU 160P DECKEL MAHO DMU 160 P duoBLOCK

Saint-Genix-les-Villages

1 669 km

Apdirbimo centras DECKEL MAHO DMU 160P
DECKEL MAHODMU 160 P duoBLOCK

Skambinti

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 600 mm, Y ašies eiga: 1 250 mm, Z ašies eigos atstumas: 1 000 mm, greitas poslinkis X ašimi: 60 m/min, greitas poslinkis Y ašis: 60 m/min, greitasis eiga Z ašyje: 60 m/min, X ašies padavimo greitis: 15 m/min, Y ašies padavimo greitis: 15 m/min, padavimo greitis Z ašis: 15 m/min, valdiklio modelis: HEIDENHAIN TNC 530, ruošinio svoris (maks.): 4 000 kg, bendras svoris: 35 000 kg, veleno greitis (min.): 20 aps./min, veleno greitis (maks.): 12 000 aps./min, veleno nosis: SK 40 (DIN 69871), įrankių magazino lizdų skaičius: 60, CNC apdirbimo centras DECKEL MAHO DMU 160 P TECHNINĖS CHARAKTERISTIKOS: Gamybos metai: 2008 CNC valdymas: HEIDENHAIN TNC 530 Vienu metu valdomų ašių skaičius: 5 X ašies eiga: 1600 [mm] Y ašies eiga: 1250 [mm] Ksdpfx Aozggmbof Hjdr Z ašies eiga: 1000 [mm] X, Y, Z ašių padavimo greitis: 15000 [mm/min] X, Y, Z ašių greitoji eiga: 60000 [mm/min] Stalo matmenys: Ø1500 x 1250 [mm] Maks. stalo apkrova: 4000 [kg] Veleno tipas: SK 40 (DIN 69871) Min. veleno apsukos: 20 [aps./min.] Maks. veleno apsukos: 12000 [aps./min.] Įrankių keitimo magazino stotelių skaičius: 60 Staklių svoris: 35000 [kg] ĮRANGOS KOMPLEKTACIJA: 1 × HEIDENHAIN ruošinio zondas 1 × lazerinė įrankių matavimo ir kontrolės sistema 3 × HEIDENHAIN linijiniai stikliniai matuokliai X, Y ir Z ašims 1 × aušinimo sistema per veleną 1 × drožlių transporteris 1 × popierinio filtro įrenginys (popierinės filtravimo sistemos) Daugiau informacijos – pagal užklausą.

Peržiūrėti detales

Mažas skelbimas

Cilindrinio šlifavimo staklės - Išorė KELLENBERGER R175-1500

Kirchheim unter Teck

1 225 km

Cilindrinio šlifavimo staklės - Išorė
KELLENBERGERR175-1500

Skambinti

Būklė: naudotas, Grinding diameter: 350 mm Grinding length: 1,500 mm Centre height: 175 mm Grinding wheel diameter: 500 mm Overhauled according to Kellenberger guidelines, including new, modern and future-proof control system. New servo motors in the X-axis and for the workpiece headstock. Photo shows a previously delivered machine in original equipment. - Operation via the touch panel is extremely user-friendly. - The symbols on the control panel are virtually identical to the original control system, so no retraining is required. - Diagnostic function with display of PLC messages and digital I/O. - Dressing function can be expanded or modified according to customer requirements. - Option for spindle orientation of the workpiece spindle upon request. - New maximum infeed amount: 40 mm (can be further increased on request). - Digital readout in 2 axes. Resolution on X-axis: 0.5 µm Options: - Encoder with digital display in the workpiece headstock - Encoder with digital display in the grinding spindle stock (no height adjustment possible with spindle) - New, robust internal grinding attachment with 80 mm or 100 mm diameter, including height adjustment - Increase of centre height to maximum 225 mm - Speed control for the grinding spindle Includes: - Operating tools - Draw tube for chuck Additional accessories available on request. The machine features an electronically controlled infeed system with stepper motor drive on the X-axis. Kdodouwv Idepfx Af Hsr Hydraulic longitudinal and rapid traverse table movement. Versatile applications in production for external cylindrical and internal grinding, or for external, face and internal grinding of single workpieces in one setup. Available options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measurement control At present, the machine does not comply with the essential safety and protection requirements according to BetrSichV 2015 (German Occupational Health & Safety Regulation for the use of work equipment). Raising the required minimum protection level must be assessed by conducting a risk assessment according to BetrSichV.

Peržiūrėti detales

Mažas skelbimas

Cilindrinė šlifavimo mašina KELLENBERGER UR175X1000

Contamine-sur-Arve

1 588 km

Cilindrinė šlifavimo mašina
KELLENBERGERUR175X1000

Skambinti

Būklė: naudotas, TECHNICAL DATA - Distance between centers: 1000 mm - Center height: 175 mm - Table orientation: 9° - Universal wheelhead spindle stock - Left grinding wheel dimensions: 400 x 50 x 127 mm - Motor power: 3 kW - Spindle speed: 1500 / 1700 / 2200 rpm - Wheelhead spindle orientation: 270° (3 x 90°) - Internal spindle bore: 90 mm - Workpiece spindle stock orientation: 180° - Spindle speed: 20 - 400 rpm - Internal spindle taper: Morse 5 - Motor power: 0.9 kW - Tailstock internal taper: Morse 4 - Tailstock quill stroke: 30 mm - Dimensions: 2860 x 1680 x 1670 mm - Machine weight: 2500 kg ACCESSORIES - Automatic cycle (roughing, finishing, and return) - Counter-center Kodpfexy S A Isx Af Hsdr - Coolant tank with paper filter - 1 internal grinding spindle - 1 diamond holder - 2 two-finger steady rests - 1 three-finger steady rest - 1 set of drivers - Various grinding wheel holders

Peržiūrėti detales

Reklamuokite čia